Radio / Cassette

Bremen RCM 127

Operating instructions

Table of contents
Traffic safety... 2 Important information... 3 Quick reference... 5 KeyCard - Anti-theft system.. 10 Detailed operating instructions.. 14
First-time installation... 14 Operating the radio with RDS.. 17 RDS information... 23 PTY - Programme Type... 25

Traffic safety

As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation at all times. Never use your car radio in a way that could distract you. Please keep in mind that you travel a distance of 14 m per second at a speed of only 50 km/h. Should the traffic situation become particularly demanding, we advise you not to use the car radio equipment. Always make sure that you are still able to hear any warning signals coming from outside of the vehicle, such as police or fire engine sirens, so that you can react accordingly. As a result, you should always select a moderate volume for playing your car radio equipment while you are driving.
Traffic message reception with RDS-EON. 29 Traffic Memo (TIM).. 32

Warning... 37

Operating the tape player.. 39 Operating the CD changer (optional). 44 Operating the AUX mode.. 52 Audio settings... 53
DNC.... 54 EQ (equalizer)... 56 Manual equalizer... 56 Hi-fi calibration... 57
Programming with DSC... 61
Muting the audio source while using the car phone. 66

Specifications.. 67

Important information

Precautions

Before operating your new car radio for the first time, please read the following information carefully.

Accessories

Use accessories and spare parts approved by Blaupunkt only. You can use the following Blaupunkt products with this car radio: Amplifier: All Blaupunkt amplifiers, the pre-amp out cable is required. Subwoofer pre-amp out for connecting an amplifier. CDC F 07

Installation

If you would like to install your new car radio yourself or add other audio components to the existing ones, then please read the enclosed instructions on installation and connection carefully.

Sub out: Changer:

Car phone
If there is a mobile telephone installed in your vehicle, the radio, tape player or CD player (optional) can be muted automatically when the phone is being used. It is possible to program the system so that traffic messages or the playback of stored traffic messages always have priority over the use of the telephone. (For more information, please refer to the section on muting the audio source while using the car phone.)
Remote control: With the infrared remote control RC 07 you can control all of the important functions of your car radio system from the steering wheel. Navigation: The Blaupunkt RGN 06 navigation component can be added to allow active route guidance (expected to be available: mid 1997) Navigation components can only be installed by specialised Blaupunkt navigation dealerships. Other components are currently in the planning.
DEUTSCH ENGLISH FRANAIS ITALIANO NEDERLANDS SVENSKA ESPAOL CD - Betrieb (Option) PORTUGUS

Remote control RC 07

(optional)

Quick reference

1 ON / Mute Switching on/off: Press ON. To switch the set on with the ON button, the KeyCard has to be inserted. The unit will play at the pre-adjusted volume level (VOL FIX). To switch the set off, press ON for longer than 0.5 seconds. Mute: On/off: Press ON or on the remote control briefly. MUTE will appear in the display when the mute function has been activated. The set will switch off automatically if it is set to mute for longer than 5 minutes. Switching the set on for the first time: If the set is switched on for the first time or after the power supply has been disconnected, the FIRST INSTALL menu will appear in the display. If you would like to alter any of the settings, read the instructions in the section on First installation. You can exit the FIRST INSTALL menu by pressing the selection button marked EXIT.

Switching on/off with the KeyCard: Switch the set on by pressing ON. Note First read the information in the section on the KeyCard anti-theft system. Switching on/off with the ignition: It is possible to switch the set on and off with the vehicle ignition if it has been installed to do so. After the set has been switched off using the ignition, a double beep will remind you to remove the KeyCard before you leave the vehicle. Switching the set on when the ignition is off: The set can be switched on again by pressing ON if the KeyCard is left in the set after the double beep. After playing for one hour, the set will switch off again automatically in order to save battery power. If you press ON again, the set will play again for one hour.
2+/Adjusting the volume: The volume can be adjusted from VOLUME +0 to VOLUME +80. Press + or - to adjust the volume in either direction in 15 increments per second. Each time the set is switched on, it will play at the preadjusted volume level. The pre-adjusted volume level (VOL FIX) can be altered. Read the information in the section on Programming with DSC VARIOUS. Switching the volume to zero immediately: Press ON briefly. MUTE will then appear in the display and the volume will be reduced to zero immediately. Press ON again, and the set will resume playing at the volume level last set. The set will switch off automatically if it is set to mute for longer than 5 minutes. 3 TIM (traffic memo) Setting the TIM times: Press TIM for approximately 1 second. Recalling stored traffic messages: Press TIM briefly.
Switching TIM off while using a car wash: Press ON to switch the set off and then press TIM. TIM-FUNCTION DEACTIVATED will appear briefly in the display. The motor antenna will retract. Be sure to read the section on Traffic Memo (TIM) for more important information. 4 TU (tuner) Press this key to switch to operating the radio (main menu). If you press TU while the radio is playing, the set will switch between the main menu and the menu selected last. 5 CC (compact cassette) Press to switch to operating the tape player. 6 CDC (CD changer) Press to switch to operating the CD changer (optional). If the Blaupunkt CDC F 07 changer has not been connected, NO CHANGER CONNECTED will appear in the display. 7 AUX Press to switch to any additional equipment connected. Refer to Accessories to find out which auxiliary equipment can be added to this system.
8 S (select) Press S briefly: The current time will appear in the display header. The menu for the sound settings will appear in the display. Press / to retrieve the function you would like to alter.
9 Display/Selection menu The selected mode of operation and the functions which can be selected appear in the display. It is possible to preselect colour, illumination and other settings. Refer to the operating instructions in the section on Display settings. : Display header Indicates the current selections, e.g. when operating the radio, the station; when operating the tape player, the track.

The KeyCard anti-theft system
One KeyCard is included with the set. You can, however, also use a second KeyCard with your set. You can purchase a second KeyCard at any specialised dealership.

Starting up the unit

Press ON to switch the set on. With the KeyCard tongue protruding out of its opening, insert the KeyCard into the slot with the contact area facing up. Make sure that the KeyCard is inserted properly. The car radio is now ready to operate. If a KeyCard which does not belong to the set is inserted, KEYCARD ERROR will appear in the display. Do not attempt to use the equipment in this case. After approximately 10 seconds the unit will switch off automatically. If you insert any other type of card (e.g. telephone or credit card) into the slot, the display will indicate THIS IS NO KEYCARD for approximately 2 seconds. Remove the incorrect card and insert the correct KeyCard into the unit. Following KEYCARD ERROR or THIS IS NO KEYCARD press ON to switch the unit on.

Removing the KeyCard

Press the KeyCard tongue. The KeyCard can now be removed. Pull the KeyCard out of the slot.
Training the second KeyCard / replacing the KeyCard
A KeyCard can be trained as an additional KeyCard if the unit is still being operated with the original KeyCard. If you want to train a second KeyCard: insert the original KeyCard and switch the unit on. Press S for approximately 1 second. DSC-MAIN MENU will appear in the display header.
DSC-MAIN MENU TUNER DISPLAY VARIOUS KEYCARD
Select the following functions one after the other: KEYCARD (playback will be set to mute) and LEARN KC. PLEASE CHANGE CARD will appear in the display. Remove the original KeyCard and insert the new KeyCard. LEARNING READY will then appear in the display, the new KeyCard is now trained. The new KeyCard can now be used to operate the set. This car radio will not accept more than two KeyCards. When trying to train a third KeyCard, the KeyCard which was not used in the training process will automatically become invalid.
DSC-KEYCARD LEARN KC READ KC
LEARN KEYCARD PLEASE CHANGE CARD EXIT

DEUTSCH

ENGLISH

FRANAIS

ITALIANO

NEDERLANDS

SVENSKA
ESPAOL CD - Betrieb (Option)

PORTUGUS

Displaying the radio pass data
After inserting the original KeyCard, you can have the radio pass data such as the model name, the product number (7 6.) and the serial number shown in the display. Insert the original KeyCard and switch the unit on. Press S for approximately 1 second. DSC-MAIN MENU will appear in the display header.

FIRST INSTALL CLOCK OWNER-ID AUX-IN NORM SET EXIT
NORM SET Reset to original factory settings Press EXIT to exit the menu. You can activate this menu if you switch the radio off, then press down S and hold it while you switch the set on again. Setting the clock Press CLOCK. The current time will appear in the display header.

CLOCK - HOURS - MIN

12:27 HOURS + MIN + EXIT
Press - HOURS / HOURS + to alter the hours and - MIN / MIN + to alter the minutes. When you have completed the setting, press EXIT.
Entering OWNER ID On four lines (max. 64 characters) you can enter information as proof of ownership. OWNER-ID. OWNER-ID will appear in the display header. Press Press / to select the characters.
Press << / >> to select the entry position. If you are at one of the end positions (first or last character), you can move directly to the opposite end position by pressing << / >>. Press / in order to select the line. Press CLEAR to delete the entire entry. to exit the menu. The last setting will be stored automatically. Press EXIT
OWNER-ID ________________ ________________ ________________ ________________ CLEAR EXIT
Activating AUX / Entering the name of the auxiliary equipment If you want to operate an additional piece of equipment, you must activate the AUX setting first. You can enter any name (max. 8 characters) for this equipment. Press AUX-IN. Press AUX. The function is activated when AUX is highlighted. AUX can now also be selected with the RC 07 remote control. Press AUX-NAME and enter the name of the auxiliary equipment, such as Walkman. Press / to select the characters.
FIRST INSTALL AUX AUX-NAME EXIT
Press << / >> to select the entry position. Press CLEAR to delete the entire entry. Press EXIT to exit the menu. The last setting will be stored automatically.

W A L K M A N

DEUTSCH ENGLISH FRANAIS ITALIANO NEDERLANDS SVENSKA ESPAOL CD - Betrieb (Option)
Resetting to original factory settings Using NORM SET you can return all of the altered settings except for the current time to the original factory settings. Warning! You will delete all of the adjusted settings such as DSC, OWNER-ID, equalizer settings, preference tables, etc. If you want to reset all of the altered settings to the original factory settings, press NORM SET for approximately 4 seconds. The following message will appear in the display: PLEASE WAIT. ALL ADJUSTMENTS ARE SET TO DEFAULT VALUES. As soon as the FIRST INSTALL menu appears in the display, the settings have all been returned to the original factory settings. Press EXIT to exit the menu.

NDR1 NDS SEARCH HR 1 HR 3 SCAN ANTENNE NDR 2 MDR LIFE NDR1 NDS BROCKEN NDR 3

Selecting a station.

The display header will indicate the station name or, if the set does not receive an RDS signal, the station frequency of the station currently playing. There are several different ways of selecting a station:. from the reception or preference table When listening to an FM station, select the desired table by pressing << />>.
or. Select the station by pressing The station name or the frequency will appear in the display header.
Note: If a station is displayed but crossed out in the preference menu, this means that either the reception is very poor or that the station could not be clearly identified as the one stored. Stations on the same frequency which do not transmit an RDS signal cannot be clearly differentiated from one another. by station search or manually You must select the station search menu first. You can switch from the reception or preference table by pressing SEARCH. The search menu has been selected when SCAN appears in the upper left corner of the display. Start the station search function by pressing (up) or (down). The station search will stop at the next station within reception range. The station search sensitivity selected LOCAL or DX (distant) will be highlighted in the display. You can toggle between the two levels of station search sensitivity by pressing the corresponding softkey. The station search sensitivity can be set separately for LOCAL and DX. For more information refer to the section on Programming with DSC TUNER, S-LO or S-DX. If you hold down / , the station search will run forwards or backwards quickly.
NDR 2 SEARCH BREMEN 3 HR 3 SCAN D-Radio NDR1 NDS BREMEN 1 NDR 2 BREMEN 2 NDR 3
NDR 2 92.10 SCAN LOCAL DX STORE EXIT
Start the manual station search by pressing << or >>, the frequency will move up or down in increments. If you hold << or >> down, then the frequencies will run through quickly.
. with SCAN The SCAN feature will briefly play all of the stations listed in the table displayed. FM SCAN If the reception table is displayed, all of the FM stations within reception range will be scanned. If the preference table is displayed (display header highlighted), all of the stored FM stations will be scanned. Start SCAN: Press SCAN. The display will indicate the station name, or if no RDS signal is received, the frequency of the station being scanned. SCAN will appear in the display header. End SCAN: Press EXIT MW/LW SCAN If the preference table is displayed (display header highlighted), all of the stored stations will be scanned. In the SEARCH menu it is possible to scan all of the stations currently within reception range. Select the corresponding menu. Select preference table: MW or Press TU,

S C A N

, the last station scanned will begin normal play.

756 FM MW LW

Select SEARCH menu: Press TU, MW or LW, SEARCH If no stations have been stored on the MW waveband it is not possible to select SEARCH. SCAN can only be used in the SEARCH menu. Start SCAN: SCAN. Press If no station is selected during the scanning process then the station that was selected originally will be played. End SCAN: Press EXIT

756 SEARCH SCAN 944

Storing stations
FM stations Up to 16 FM stations from the reception table can be stored in the preference table. Select reception table to store stations: FM one after the other, the display header should not be Press TU and highlighted, if it is, switch by pressing << or >>. The stations within reception range will appear in the display.
756 SCAN LOCAL DX STORE EXIT
Store selected station: Press or for the station you wish to store, e.g. NDR 2, for approximately 1 second until you hear a beep. This station will be stored in the preference table. The stations will appear in the order in which they are stored. You will hear a double beep when the table is full. Then you have already stored 16 FM stations.
DEUTSCH ENGLISH FRANAIS ITALIANO NEDERLANDS
SVENSKA ESPAOL CD - Betrieb (Option) PORTUGUS
Storing MW/LW stations Up to 8 MW stations from the search menu can be stored in the preference table. 8 LW stations have already been stored in the preference table. Select search menu to store stations: MW or LW, SEARCH Press TU, If no stations have been stored on the MW waveband it is not possible to select SEARCH. Select station with search or manually: Station search (up) or (down). manually >> (up) or << (down). The station currently received will appear in the display header. Store selected station: Press STORE for approximately 1 second until you hear a beep. STORE will disappear from the display when 8 stations have been stored.

Deleting stored station:

Select preference table. Press or for the station you wish to delete for approximately 4 seconds, until you hear a beep. This station will be deleted.

RDS information (RDS - Radio Data System)
RDS offers you more convenience when listening to FM radio. Most radio stations now transmit RDS information along with their regular programming. RDS offers you a number of interesting advantages:

Station name

If it is possible to identify a station, the station name including a regional identifier, if applicable, will appear in the display, for example, NDR1 NDS (regional programme in Lower Saxony, Germany).

Alternative frequency

If a station has been identified as an RDS station, the radio will automatically select the frequency with the best reception for the station selected. This means that you can drive all through northern Germany, for example, after selecting the station (e.g. NDR 2) you wish to listen to only once. You will hear this station in the best possible reception quality the entire time without having to adjust your set. If you leave the reception area for the station selected - you will notice a considerable decrease in reception quality - we recommend that you tune into a different station. A station which is not currently within your reception range will appear crossed out in the preference table. This station will be deleted from the reception table as soon as it is no longer within the radios reception range.
89.50 SEARCH HR 1 ---------HR 3 SCAN ANTENNE NDR2 MDR LIFE NDR1 NDS BROCKEN NDR 3

REG Regional programmes

At certain times of the day or on a permanent basis, certain radio stations divide their FM programmes into different regional programmes providing local information. You can select these regional programmes directly from the reception or preference table. If you are listening to a regional programme and wish to continue doing so then REGIONAL must be highlighted in the radios main menu. If the regional programme function has been activated, the radio optimises the reception only for the selected regional programme. If the radio cannot find an alternative frequency offering better better reception of the regional programme, the selected programme will continue to play even if the reception quality deteriorates. Switching the regional programme function on/off To switch the regional programme function on/off, you must activate the main radio menu. Depending on the situation press TU once or twice until FM is highlighted in the display. If REGIONAL is highlighted as well, the regional programme function has also been activated. To switch the regional programme function on/off, briefly. press REGIONAL Selecting a regional radio station If the regional programme function has been activated, a regional radio station will be displayed in the display header of the main radio menu as: NDR 1 NDS REG-E, for example.

FM MW LW TA PTY

NDR1 NDS R-TEXT REGIONAL
NDR1 NDS REG-E FM R-TEXT REGIONAL MW LW TA PTY
REG indicates that the regional programme function is switched on. The letter following (A to L is possible) indicates which regional programme has been selected. If you are currently somewhere where several different versions of the regional station are within reception range then you can select another alternative. Briefly press the softkey for the station selected. If there are no alternative stations within reception range there will be no change.

PTY Programme type

PTY is an RDS service now being offered by an increasing number of radio stations. This feature allows you to select FM stations according to the type of programme they broadcast. After you have chosen the type of programme you wish to listen to, you can select the corresponding stations directly by pressing the softkeys. Switching the PTY menu on/off You can activate the PTY menu in the main radio menu. Call up the main radio menu by pressing TU. FM will be highlighted in the display.
NDR 2 FM MW LW TA PTY R-TEXT REGIONAL
To switch on: Press PTY. The programme types will appear in the display. Press EXIT to exit the menu.
PTY - MENU NEWS DRAMA ---------- ---------CULTURE AFFAIRS ---------INFO SCIENCE ---------- ---------SPORT ---------EDUCATE EXIT ---------25
ITALIANO NEDERLANDS SVENSKA ESPAOL CD - Betrieb (Option) PORTUGUS

Programme type

Use the softkeys the next page. or to select the programme type, use or to turn to
You can use DSC to switch the language to German, English or French (refer to Programming with DSC TUNER, PTY LANG). All of the programme types listed below are available. The letters printed in bold are identical to the actual PTY display. NEWS CURRENT AFFAIRS INFORMATION SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP MUSIC ROCK MUSIC M.O.R. M (middle of the road music) LIGHT M (light classical) CLASSICS (serious classical) OTHER M (other music) PTY 16 to PTY 30 have not yet been assigned.
PTY - MENU NEWS DRAMA ---------- ---------CULTURE AFFAIRS ---------INFO SCIENCE ---------- ---------SPORT ---------EDUCATE EXIT ----------
Switching PTY on / Selecting the programme type
You can activate the PTY menu in the main radio menu. In the PTY menu you can select the programme type. Press TU. FM will be highlighted in the display. Press PTY. The programme types will appear in the display. Any programme types which are crossed out on the list are not currently available. If any of the 30 different types of programmes are listed, then press or in order to turn to the next page. Select the programme type by pressing or. All radio stations which are currently broadcasting the programme type selected will appear in the display. Select the station by pressing or. You will receive this station in the selected programme type. A programme type which is not currently available (crossed out in the display) can be selected anyway. If this type of programme should then become available within the station chain, the radio will switch to it automatically provided that ACTIVATE is highlighted (is switched on). If necessary, press ACTIVATE. As soon as this programme can no longer be received, the radio will switch back to the previous station. If you would like to switch this function off (deactivate), press DEACT in the PTY menu. If there are no stations available in the programme type selected, the station table for this programme type will remain blank if selected.

Switching the TIM standby mode on/off
Automatically: The TIM standby mode will switch off automatically if the car radio is not turned on within 72 hours. Switching the set back on re-activates the standby function.
Manually: Select the TIM menu by pressing TIM for approximately 1 second while the radio is switched on. Press ACTIVE to switch the TIM standby mode on or off. If ACTIVE is not highlighted, then the TIM standby mode is switched off. In this case, a motor antenna will retract when the radio is switched off.

Warning note

Your motor antenna may be damaged in a car wash If your vehicle is equipped with a motor antenna, it will remain fully extended if the TIM timer is active when the radio is switched off. The antenna may also come out inside the car wash even if the set is turned off but the TIM timer active. This can cause serious damage! Please read the next section for more information on how to interrupt the TIM standby mode temporarily before driving into a car wash.
Temporarily interrupting the TIM standby mode (before driving into a car wash)
Switch off the radio before driving into the car wash. If the display switches off immediately, the TIM standby mode is inactive and the motor antenna will retract. You can now drive into the car wash. However, if TIM ACTIVE lights up briefly in the display panel when the set is turned off, the TIM standby mode is active. Press TIM.
TIM-FUNCTION DEACTIVATED will appear briefly in the display. The antenna will retract (please check to be sure) and will stay that way until the unit is switched back on. Now the TIM standby mode is temporarily inactive. You can drive into the car wash. The standby function will be automatically re-activated as soon as you switch the radio on again. The motor antenna will then extend. Warning! In order to prevent possible damage, do not switch on the radio until after you have left the car wash!

TIM-FUNCTION DEACTIVATED

Cassette operation
The car radio must be switched on. The unit automatically switches to tape operation when a cassette is inserted. If a cassette is already inserted in the tape player you can switch to the tape player mode from any other operating mode by pressing CC.

Inserting a tape

Turn on the set. Press. The front panel (operating panel) will open downwards.
Insert a tape with side 1 or A facing up, the open side facing to the right. The tape will be transported to the playback position automatically. The display header will indicate which side will start to play.
PLAY SIDE A REVERSE B-SKIP SCAN DOLBY B DOLBY C R-MON

Removing a tape

Press. The front panel (operating panel) will open downwards. The cassette will eject. If the cassette is not removed from the tape player within approximately 15 seconds, it will be transported back into the unit.

Fast forward/Fast rewind

FORWARD SIDE A REVERSE B-SKIP SCAN DOLBY B DOLBY C R-MON PLAY
Fast forward Fast rewind / Select a recorded title (S-CPS) forwards reverse
Stop the function by pressing the opposite key.
Selecting a recorded title with S-CPS
(Super cassette programme search) Press (forwards) / (reverse) to repeat or skip recorded titles You can skip over as many as 15 titles. Press the rocker switch / as often as required. The number of titles to be skipped will appear in the display panel. If necessary, you can correct your entry by pressing the opposite key. Stop immediately by pressing PLAY. For S-CPS to function correctly there has to be an unrecorded tape portion of at least three seconds between the individual titles.
CPS-FF 02 A REVERSE B-SKIP SCAN DOLBY B DOLBY C R-MON PLAY
Switching tracks (REVERSE)
To change the tape track during cassette playback: REVERSE. Press At the end of a track, the tape player will automatically change directions to play the other side of the tape (autoreverse). The display header will indicate PLAY SIDE A or PLAY SIDE B. Note: If there is too much tension on the tape during playback, the set may switch over to the opposite track before it has reached the end of the tape side. In this case check the condition of the cassette tape. Sometimes it helps to rewind the tape completely.

Tape equalisation

The tape mechanism is able to recognise which type of tape is playing (ferrous oxide, CrO2 or metal) and will automatically adjust to the correct setting. This is not indicated in the display.
Scanning cassette titles (SCAN)
Use the scan function to briefly play the cassette titles. If you like a title, stop the scan to continue listening to that song. To start/stop the scan function: Press SCAN. You can adjust the scan time to your individual preference in the DSC menu (see Programming with DSC SCANTIME).

DNC-ADJUST 10

Adjusting DNC sensitivity
You can select three different levels for adjusting the volume: DNC-LEVEL LOW, -MID, -HIGH. Select DNC-LEVEL LOW if the vehicle is loud and the music has a distinct bass sound. Select DNC-LEVEL HIGH if the vehicle is quiet and you play a lot of classical music. Try out the different levels to find out which one you find the most pleasant. Press S briefly. Then press DNC. The level selected will appear in the display header.
DNC-LEVEL MID TREBLE EQ DNC BASS FADER BALANCE LOUDNESS EXIT
Alter the level by pressing << / >>. When DNC OFF appears in the display, then the DNC function has been switched off. Approximately 8 seconds after the last adjustment is made, the system will automatically switch back to the previous display. You can return to this display immediately by pressing EXIT.

EQ (Equalizer)

Equalizer functions The quality of the stereo playback inside your vehicle is affected by such factors as the vehicle interior (upholstery, windows), the position of the loudspeakers, etc. Using the integrated equalizer, it is possible to adjust nine frequency bands per channel: 63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz. It is possible to store and recall three automatic and one manual equalizer setting on four memories. Use EQ OFF to switch off the equalizer. The following functions are available to provide optimum sound quality: Automatic equalizer (AUTO-EQ 1 - 3) (Hi-fi calibration) The car radio is equipped with a self-adjusting, adaptive 9-band equalizer for four channels. Three different settings can be stored. Manual equalizer Separate equalizer settings can be set manually for the front and the rear.
EQUALIZER MENU AUTO-EQ1 VIEW EQ AUTO-EQ2 AUTO-EQ3 MAN-EQ EQ OFF EXIT

Hi-fi calibration

You can set and store automatic calibrations for three different situations. The calibrations are started and called up using the softkey ( You can select the following settings: AUTO-EQ1 for the driver alone AUTO-EQ2 for the driver and front-seat passenger AUTO-EQ3 for passengers in the front and rear. Press EQ OFF to switch off the equalizer (EQ OFF in the display header). To make the calibration hold the microphone in the corresponding position (do not cover microphone opening). For setting 1 (driver alone), position the microphone directly at the height of the drivers head. For setting 2, place the microphone between the driver and the passenger on the front seat. For setting 3, place the microphone centrally between the front and rear seats. Start Hi-fi calibration During the calibration process it is important that the surroundings are very quiet. Any outside noises will distort the readings. The loudspeakers should not be blocked by any objects. The car radio must be switched on. Place the microphone in the desired position. The readings will be distorted if the microphone is placed in an incorrect position. Depending on the vehicle and the position of the loudspeakers, the calibration can be linear or can boost the bass sounds. Try the settings to find out which one you prefer.

SET AUTO-EQ 2 FRONT LEFT - -- -- -- --- -- -- -- NEXT 1k HZ EXIT
Setting the equalizer manually
If you would rather set the equalizer manually, you can set nine different frequency bands from 63 Hz to 16 kHz for the front and rear loudspeakers separately. In this case, and MAN-EQ if necessary one after the other. press S, EQ MAN-EQ (manual equalizer) must be highlighted. Press VIEW EQ. VIEW MANUAL-EQ will appear in the display header. The display will indicate the equalizer setting for the front loudspeakers. Select the frequency band by pressing << / >>. The frequency band selected will appear at the bottom of the display.
VIEW MANUAL-EQ FRONT - -- -- -- --- -- -- -- NEXT EXIT
Alter the sound level by pressing /. After you have completed the adjustments, press NEXT. REAR will appear in the display. Adjust the equalizer for the rear loudspeakers. Press EXIT to exit the menu. The last setting will be stored. Calling up the manual equalizer setting If you want the playback to take place with the manual equalizer setting, press S, EQ and MAN-EQ if necessary one after the other. MAN-EQ (manual equalizer) must be highlighted.

MANUAL-EQ FRONT

- -- -- -- --- -- -- -- NEXT 63 HZ EXIT

Programming with DSC

The car radios have been pre-programmed at the factory. Using the DSC (Direct Software Control) MAIN MENU you can customise certain settings and functions to suit your own personal needs and preferences. If you wish to alter any of the programming, press S for approximately 1 second. DSC-MAIN MENU will appear in the display header. Select a sub-menu, e.g. TUNER. A list of the DSC functions which can be altered in the TUNER MENU will appear in the display. Adjust the settings by pressing << / >> or pear in the display header. TUNER TIM TIME TA VOL /. The new settings will ap-
Set TIM times. Refer to Traffic Memo (TIM). Set the volume for traffic messages. If VOL +00 is set, the music or radio will playback at the last volume setting selected. Select PTY language: GERMAN, ENGLISH, FRENCH. Sound adjustment for voice programmes In future many RDS radio stations will differentiate between music and speech programmes. You can alter the tone for speech programmes from M/S-LEVEL 0. 4. LEVEL 0: Music/speech off

EEPROG EEPROG JUMP JUMP EEPROG EEPROG JUMP JUMP JUMP JUMP EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG JUMP JUMP JUMP JUMP JUMP EEPROG EEPROG EEPROG EEPROG EEPROG JUMP EEPROG JUMP JUMP JUMP JUMP ? EEPROG JUMP JUMP JUMP JUMP

DELCO DELCO DELCO

GEO CDR 500 USA CARS

? TMS TMS

RPC 6001

EEPROG

ELTRA RPC 6007

FIAT FIAT

PHILIPS DC449 PHF011W MAREA GRUNDIG FA0925
FISHER FISHER FISHER FISHER FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD
AX 835 AX 845 AX 1845 AX ( only radio) 2002 ( only radio) 2014 INTERCONTI 14740 2003R (>1996) Detachable panel 2004 (>1996) 2005 (>1996) 2015 RDS 2006 RDS 2006 RDS TI 2007 RDS TI 2028 (SONY) 2040 (SONY) TRAFFIC RDS EP 12 DS (SOUND2000) E-SRT 22 DPS 770 INTERCONTI ESRT22DPS ESRT32DPS VW SOUND 1 VW SOUND 2
EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG 77007 EEPROG EEPROG EEPROG EEPROG TMS TMS JUMP EEPROG XPROG XPROG ? XPROG SERVICE SERVICE ? ? ? ? TMS TMS

FUJITSU FUJITSU FUJITSU

TOYOTA 7200 (38401) MAZDA TEN CD320RCE (TOYOTA)

EEPROG EEPROG EEPROG

GAMMA GAMMA GAMMA GAMMA GAMMA GAMMA GAMMA GAMMA GAMMA GAMMA GAMMA II, IIA (BLAUPUNKT) III (BLAUPUNKT) CC BLAUPUNKT CC BOSE BLAUPUNKT IV PANASONIC IV PHILIPS PHILIPS-3 CC GRUNDIG GAMMA 2 (GRUNDIG) GAMMA 3 (GRUNDIG) GAMMA 3a (GRUNDIG)
GAMMA GAMMA XPROG XPROG EEPROG EEPROG PH-GAM XPROG EEPROG EEPROG EEPROG
GELHARD GELHARD GELHARD GELHARD GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG
GXR 222RP GXR 246LD GXR 254DR GXR 3300 RDS 3301 SCD 3851 RDS 3860 3870RDS 3880RDS EC 4700
EEPROG EEPROG EEPROG EEPROG XPROG BUG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG XPROG XPROG EEPROG EEPROG XPROG EEPROG XPROG XPROG EEPROG EEPROG EEPROG
GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG GRUNDIG EC 4790 EC 4805 4870RDS 4871RDS 4000RDS EC 4200 RDS EC 4290 CD 5000 RDS 5100 RDS 5201RDS 5200 RDS 5270 RDS 5290 RDS 5300 RDS 5390 RDS 5500 RDS 5600 RDS 6400 RDS 6500 RDS 7400 RDS 7500 RDS ADVANCED CC, CD CITROEN 2014 FIAT GAMMA 2 GAMMA 3 GAMMA 3a GAMMA CC PORSHE SAAB SC 303 SC 303 RDS SC 804 SMOGEN SC 303 SAAB SCD 1910 RDS SCD 1590 SCD 3590 SOUND 3000 (MB) SOUND 5000 (MB) SOUND 7000 (MB) VW ALPHA IV VW BETA IV AUDIO 10 (MB)