www.blaupunkt.com

Radio SD MP3 WMA

Canberra SD27 Melbourne SD27 Melbourne SD27 Sydney SD27

/ / / / 515 310

Bedienungs- und Einbauanleitung Operating and installation instructions Mode demploi et de montage Istruzioni duso e di installazione Gebruiksaanwijzing en inbouwhandleiding Bruks- och monteringsanvisning Instrucciones de manejo e instalacin Instrues de servio e de montagem Betjenings- og monteringsvejledning Instrukcja obsugi i montaowa Nvod k obsluze a k monti Nvod na obsluhu a intalciu
01_CanbSydMelbSD27_de.indd 1

14.03.2008 15:01:51 Uhr

Bedienelemente
01_CanbSydMelbSD27_deu.indd 2

15.01.2007 14:58:30 Uhr

Controls
button to remove the control panel (release panel)
> M/OK button Short press: Calls up the menus for the settings. Conrming menu settings with OK. Long press: Starts the scan function. ? SRC button Switches sources between radio, SD/MP3, CD changer (if connected) or AUX-IN, AUX-IN IN (if connected).
2 Button to switch the device on/off and operate the volume mute feature. 3 Volume control 4 BND/TS button Short press: Selects the FM memory banks and the MW and LW wavebands. Long press: Starts the Travelstore function. 5 Arrow buttons 6 ESC button 7 TRAF button Short press: Switches trafc information standby on/off. Long press: Switches convenient RDS function on/off. 8 LCD display 9 DIS button : Slot for SD/MMC cards ; Front AUX-IN IN socket for connecting external audio sources, e.g. portable CD players. < AUDIO button Sets bass, treble, balance and fader. Selects an equalizer presetting. Switching X-BASS on/off and adjusting it. = Keys 1 - 5
02_CanbSydMelbSD27_eng.indd Abs1:32

15.01.2007 14:59:53 Uhr

Contents
02_CanbSydMelbSD27_eng.indd 33

15.01.2007 14:59:55 Uhr

PORTUGUS
About these instructions. 35 Symbols used.. 35 Use as directed.. 35 Declaration of conformity. 35 For your safety.. 36 If you are installing device yourself. 36 Observe the following!.. 36 Cleaning instruction.. 36 Disposal note.. 36 Scope of delivery.. 37 Optional equipment (not part of the scope of delivery). 37 Warranty... 37 Service.. 37 Detachable control panel.. 38 Theft protection.. 38 Detaching the control panel. 38 Attaching the control panel. 38 Switching on/off.. 38 Switching on/off using button 2.. 38 Switching on/off using the vehicle ignition... 39 Switching off with detachable control panel.. 39 Timeout function.. 39 Adjusting the volume.. 39 Setting the power-on volume. 39 Quickly reducing the volume (Mute). 40 Switching the conrmation beep on/off.. 40 Muting during telephone mode. 41 Telephone Audio/Navigation Audio. 41
Radio mode.. 42 Adjusting the tuner.. 42 Switching to radio mode.. 42 Convenient RDS functions.. 42 Selecting the waveband/ memory bank.. 43 Tuning into a station.. 43 Setting the sensitivity of station seek tuning.. 44 Storing stations.. 44 Storing stations automatically (Travelstore).. 44 Listening to stored stations. 44 Scanning receivable stations (SCAN). 44 Setting the scanning time. 45 Programme type (PTY). 45 Conguring the display. 46 Trafc information.. 47 Switching trafc information priority on/off.. 47 Skipping a trafc announcement. 47 Setting the volume for trafc announcements.. 47 SD/MMC mode.. 48 Preparing MP3/WMA titles. 48 Inserting/removing SD/MMC card. 49 Switching to SD/MMC mode. 49 Conguring the display. 49 Selecting a directory.. 49 Selecting tracks.. 50 Fast seek tuning (audible).. 50 Repeating individual tracks or whole directories (REPEAT).. 50 Random track play (MIX).. 50 Scanning tracks (SCAN). 50 Interrupting playback (PAUSE). 51

ESPAOL

SVENSKA

NEDERLANDS

ITALIANO

FRANAIS

ENGLISH

DEUTSCH

CD-changer mode.. 51 Switching to CD-changer mode. 51 Selecting CDs.. 51 Selecting tracks.. 51 Fast seek tuning (audible).. 51 Conguring the display. 51 Repeating individual tracks or whole CDs (REPEAT). 51 Random track play (MIX).. 52 Scanning all tracks on all CDs (SCAN).52 Interrupting playback (PAUSE). 52 Clock Time. 52 Displaying the time. 52 Setting the time.. 52 Selecting 12/24-hour clock mode. 53 Displaying the time with device and ignition switched off.. 53 Sound.. 53 Equalizer.. 53 Setting the left/right volume distribution (balance). 56 Adjusting the front/rear volume distribution (fader). 56 Equalizer presettings (presets). 56 X-BASS.. 57 Adjusting the X-BASS boost. 57 Adjusting E-XBASS.. 57 Display.. 58 Adjusting the display brightness. 58 External audio sources. 58 Factory settings (Normset).. 59 Specications.. 60 Installation instructions.. 351
02_CanbSydMelbSD27_eng.indd 34

About these instructions

DEUTSCH DANSK PORTUGUS ESPAOL SVENSKA NEDERLANDS ITALIANO FRANAIS ENGLISH
These instructions contain important information to easily and safely install and operate the device. Read these instructions carefully and completely before using the device. Keep the instructions at a location so that they are always accessible to all users. Always pass on the device to third parties together with these instructions. In addition, observe the instructions of the devices used in conjunction with this device.

Use as directed

This device is intended for installation and operation in a vehicle with 12 V vehicle system voltage and must be installed in a DIN slot. Observe the 'performance limits in the technical data. Repairs and installation, if necessary, should be performed by a specialist.
Declaration of conformity
The Blaupunkt GmbH declares that the devices Melbourne SD27, Sydney SD27 and Canberra SD27 comply with the basic requirements and the other relevant regulations of the directive 89/336/EWG.

Disposal note

(EU countries only) Do not dispose of your old unit in the household trash! Use the return and collection systems available to dispose of the old device.
02_CanbSydMelbSD27_eng.indd 36
Scope of delivery | Warranty | Service

Scope of delivery

The scope of delivery includes: 1 Car sound system 1 Support frame 2 Disassembly bar 1 Guide pin 1 Operating instructions
CD changers You can connect the following Blaupunkt CD changers: CDC A 03, CDC A 08 and IDC A 09.

Warranty

We provide a manufacturer's warranty for products bought within the European Union. Devices purchased outside the European Union are subject to the warranty terms published by our respective regional agency. The warranty terms can be called up under www.blaupunkt.com or requested directly from: Blaupunkt GmbH Hotline Robert-Bosch-Str. 200 D-31139 Hildesheim

Optional equipment

(not part of the scope of delivery) Use only accessories approved by Blaupunkt. Remote control The steering wheel and/or handheld remote control allows you to access the most important functions of your car sound system safely and conveniently. You cannot switch the device on/off using the remote control! You can nd out from your Blaupunkt dealer or on the Internet at www.blaupunkt.com which remote controls can be used with your car sound system. Bluetooth interface For Bluetooth applications, such as wireless hands-free calling, you can connect a Bluetooth interface. Amplier You can use all Blaupunkt and Velocity ampliers.

Service

In some countries, Blaupunkt offers a repair and pick-up service. Information about the availability of this service in your country can be found at www. blaupunkt.com. If you want to take advantage of this service, you may request a pick-up service for your device via the Internet.
02_CanbSydMelbSD27_eng.indd 37

Detachable control panel

Theft protection
The device is equipped with a detachable control panel (ip-release panel) as a way of protecting your equipment against theft. The device is worthless to a thief without this control panel. Protect your device against theft by taking the control panel with you whenever you leave your vehicle. Do not leave the control panel inside your vehicle - not even in a hiding place. The control panel has been designed to be easy to use. Notes: Never drop the control panel. Never expose the control panel to direct sunlight or other heat sources. Avoid direct skin contact with the control panels electrical contacts. If necessary, clean the contacts with a lint-free cloth moistened with cleaning alcohol.
The locking mechanism of the control panel is unlocked. The device switches off. u Pull the control panel straight out of the device and to the left. All the current settings are saved.

Adjusting the volume

When you have nished making your changes, u press the M/OK button >. The display shows "MENU". To exit the menu, u press the ESC button 6 or wait approx. 8 seconds.
u Adjust the mute level using the button or 5. When you have nished making your changes, u press the M/OK button >. To exit the menu, u press the ESC button 6 or wait approx. 8 seconds.
Quickly reducing the volume (Mute)
You can quickly reduce the volume to a preset level (Mute). u Briey press button 2. "MUTE" appears on the display. Cancelling mute To return to your previously set volume level, u briey press button 2 again. Adjusting the mute level You can adjust the mute level. u Press the M/OK button >. The display shows "MENU". or > button repeatu Press the edly until "MUTE LVL" appears on the display. u Press the M/OK button > to display the submenu. "MUTE" and the currently set value are displayed.
Switching the conrmation beep on/off
The system will output a conrmation beep for some functions if you keep a button pressed down for longer than two seconds, for instance, when assigning a radio station to a station preset button. You can switch the beep on or off. u Press the M/OK button >. The display shows "MENU". u Press the or button 5 repeatedly until "BEEP ON" or "BEEP OFF" appears on the display. u Switch the beep on or off using the button or 5. "OFF" means beep off, "ON" means beep on. When you have nished making your changes, u press the M/OK button >. To exit the menu, u press the ESC button 6 or wait approx. 8 seconds.
02_CanbSydMelbSD27_eng.indd 40
Muting during telephone mode
If your car sound system is connected with a cell phone or navigation system, answering the phone or a voice output of the navigation automatically mutes the car sound system. The call or the voice output is played back via the loudspeakers of the card sound system. In order for this feature to work, the mobile telephone or navigation system must be connected to the car sound system as described in the installation instructions. You can nd out from your Blaupunkt dealer which navigation systems can be used with your car sound system. If a call is answered or a navigation announcement occurs, the display shows "TELEPHONE".

Switching to radio mode

If you are in SD, CD changer or AUX-IN mode, u press the BND/TS button 4 or u press the SRC button ? repeatedly until the display shows "TUNER".
02_CanbSydMelbSD27_eng.indd 42

15.01.2007 14:59:57 Uhr

This device can receive programmes broadcast over the FM frequency range as well as the MW and LW (AM) wavebands. There are three memory banks available for the FM waveband (FM1, FM2 and FMT) and one for each of the MW and LW wavebands. Five stations can be stored in each memory bank. To switch between the FM memory banks (FM1, FM2 and FMT) and the MW and LW wavebands, u briey press the BND/TS button 4.
Note: When using this feature, you will only be able to switch to stations that you have received once before already. To receive the stations, use the Scan or Travelstore function.
02_CanbSydMelbSD27_eng.indd 43
Selecting the waveband/memory bank
Note: The convenient RDS function must be activated before you can use this feature. u Press the or button 5 to change to the next station of the broadcasting network.
Switching REGIONAL on/off u Press the M/OK button >. The display shows "MENU". u Press the or button 5 repeatedly until "REG ON" or "REG OFF" appears on the display. To switch REGIONAL on/off, u press the or button 5. u Press the M/OK button >. To exit the menu, u press the ESC button 6 or wait approx. 8 seconds.
Tuning into stations manually You can also tune into stations manually. Note: You can only tune into stations manually if the RDS function is deactivated. u Press the or button 5. Browsing through broadcasting networks (FM only) If radio stations provide several programmes, you have the option of browsing through these so-called "broadcasting networks".
To deactivate, u press and hold the TRAF button 7 for longer than two seconds. u The RDS symbol disappears from the display.
There are various ways of tuning into a station. Automatic station seek tuning u Press the or button 5. The radio tunes into the next receivable station.

Tuning into a station

Setting the sensitivity of station seek tuning
You can choose whether the radio should only tune into stations providing good reception or whether it can also tune into those with a weak reception. u Press the M/OK button >. The display shows "MENU". u Press the or button 5 repeatedly until "SENS" and the currently set value appears on the display. "SENS HI6" means that the tuner is set to the highest sensitivity setting. "SENS LO1" means it is set to the lowest sensitivity setting. u Press the M/OK button > to change the set value. u Set the desired sensitivity level using the or button 5. When you have nished making your changes, u press the M/OK button >. To exit the menu, u press the ESC button 6 or wait approx. 8 seconds. Note: You can set different sensitivity levels for FM and AM (MW/LW).
Storing stations automatically (Travelstore)
You can automatically store the ve stations offering the strongest reception in the region (only FM). The stations are stored in the FMT memory bank. Note: Any stations that were previously stored in this memory bank are deleted in the process. u Press and hold down the BND/TS button 4 for longer than two seconds. The storing procedure begins. "FM TSTORE" appears on the display. After the process has completed, the radio will play the station that is stored in memory location 1 of the FMT memory bank.
Listening to stored stations
u Select the memory bank or waveband. u Press the station button 1 - 5 = of the desired station.
Scanning receivable stations (SCAN)
You can use the scan function to play all the receivable stations briey. You can set the scanning time from 5 to 30 seconds in the menu (in increments of 5 seconds). Starting SCAN u Press and hold down the M/OK button > for longer than two seconds. Scanning begins. "SCAN", the station name or the frequency are intermittently shown on the display.

Storing stations

Storing stations manually u Select the desired memory bank (FM1, FM2, FMT) or one of the wavebands (MW or LW). u Tune into the desired station. u Press and hold down one of the station buttons 1 - 5 = for longer than two seconds to assign the station to that button. 44
02_CanbSydMelbSD27_eng.indd 44
Cancelling the SCAN and continuing to listen to a station u Press the M/OK button >. Scanning stops and the radio continues playing the station that it tuned into last.
Setting the scanning time
u Press the M/OK button >. The display shows "MENU". or button 5 repeatu Press the edly until "SCAN TIME" appears on the display. u Press the M/OK button > to display the submenu. "SCAN" and the currently set value are displayed. u Set the desired scan time using the or button 5. When you have nished making your changes, u press the M/OK button >. To exit the menu, u press the ESC button 6 or wait approx. 8 seconds. Note: The dened scanning time is also applied by the system to scanning carried out in SD and CD changer mode.

02_CanbSydMelbSD27_eng.indd 47
Trafc information | SD/MMC mode
Notes: If the volume listened to is higher than the set TA Volume, trafc announcements are played back at the volume listened to. Using the volume control 3, you can also adjust the volume during a trafc announcement for the duration of that announcement. You can adjust the volume distribution for trafc announcements during trafc reports. For further information, please read the "Sound" chapter.
WMA les can only be played back
safely if they were created with Windows Media Player version 8 or later. For a perfect access to SD/MMC cards, observe the information in the following table when saving MP3/WMA titles on the SD/MMC card: File system ID3 tags Files Number Naming of les FAT16 or FAT32, no NTFS! Version 1 or 2 Only MP3 or WMA les, directories, playlists 1,500 les (directories and tracks) per directory File extension ".wma"/ ".mp3" Max. 24 characters (more characters are possible, but it reduces the max. number of les) No special characters or umlauts Bit rate MP3: 32 to 320 kbps WMA: 32 to 192 kbps

SD/MMC mode

You can play les with music data stored on SD/MMC cards (Secure Digital or Multi-Media Card) in MP3 or WMA format using this car sound system. The operation for playing MP3 and WMA les is identical. Note: Blaupunkt cannot guarantee the correct functioning of all SD/MMC cards available on the market and, for this reason, recommends the use of SD/MMC cards manufactured by "SanDisk" or "Panasonic".

Preparing MP3/WMA titles

You can write data onto the SD/MMC cards with the help of a standard SD/MMC card reader and your PC. Notes: WMA les with Digital Rights Management (DRM) from online music shops cannot be played with this device. 48
You can name each directory using a PC. The name of the directory is then shown on the display of the device. If you like your les to be in the specic order, save the les on the card in the desired sequence in which you want to play them later.
02_CanbSydMelbSD27_eng.indd 48
D01 D02 D03 T001 T002 T003 T004 T005 T001 T002 T003 T004 T005 T006
A Directories B Tracks Files

Switching to SD/MMC mode

A D04 T001 T002 T003 T004 T005 T006 T007 T008 T009 T010 T011
u Press the SRC button ? repeatedly until the display shows "SD Card". The playback starts.
The following settings require that an SD card with MP3 or WMA les is in the device. Conguring the default display You can display various types of information on the current track: File name or track name Artist Album name Play time (PLAY) Time (CLK) Note: The ID3 text changes to scrolling text with more than 9 characters. After one pass, the rst 9 characters are permanently shown on the display. To switch between the different display options, u press the DIS button 9.

02_CanbSydMelbSD27_eng.indd 50
SD/MMC mode | CD changer mode
Interrupting playback (PAUSE)
u Press the 3 button =. "PAUSE" appears on the display. Cancelling pause u Press the 3 button =. Playback is continued.
To move up or down to another track on the current CD, u press the or 5 button once or several times.

CD-changer mode

Note: Information about handling CDs, inserting CDs and operating the CD changer can be found in the operating instructions supplied with your CD changer.
Three options are available for the display in CD changer mode: Track number and playing time Track number and time CD number and track number To switch between the different display options, u press the DIS button 9.
Switching to CD-changer mode
u Press the SRC button ? repeatedly until the display shows "CDC/AUX-IN". The device starts playing the rst CD that the CD changer detects.

Selecting CDs

To move up or down to another CD, u press the or 5 button once or several times. Note: The device will ignore empty CD slots in the changer and slots containing invalid CDs.
Repeating individual tracks or whole CDs (REPEAT)
You can repeatedly play the current track or all tracks on the current CD. u Press the 4 RPT = button repeatedly until the desired function appears on the display: "RPT TRACK" (current track) "RPT DISC" (all tracks on the current CD) "RPT OFF" (end repeat) If the repeat function is active, the display shows RPT. 51
02_CanbSydMelbSD27_eng.indd 51
CD changer mode | Clock time
You can play either all tracks on the current CD or all CDs in the magazine in random order. u Press the 5 MIX = button repeatedly until the desired function appears on the display: "MIX CD" (all tracks on the current CD) "MIX ALL" (all CDs in the magazine) "MIX OFF" (end random order) If the random track play (MIX) is active, the display shows MIX.
Cancelling Scan and continuing listening to a track u Briey press the M/OK button >. The currently scanned track will then continue to be played normally.
Scanning all tracks on all CDs (SCAN)
To scan (briey play) all the tracks on all the inserted CDs in ascending order, u press the M/OK button > for longer than two seconds. The display changes between "SCAN" and the track number. All CDs in the magazine are scanned in ascending order. Note: You can set the scanning time. For further information, please read the section entitled "Setting the scanning time" in the "Radio mode" chapter.

Clock Time

Displaying the time
You can display the time in the tuner, SD and CD changer mode. u Press the DIS button 9 until the time appears on the display.

Setting the time

To set the time, u press the M/OK button >. The display shows "MENU". or button 5 repeatu Press the edly until "CLOCK SET" appears on the display. u Press the M/OK button > to display the submenu. The currently set time appears on the display. The hours ash and can be adjusted. u Adjust the hours with the or button 5.
02_CanbSydMelbSD27_eng.indd 52

Clock time | Sound

Equalizer
This device features a digital 3-band equalizer. This equalizer allows for selecting one frequency each for bass, treble and middle and to adjust the level for the selected frequency. In addition, you can adjust the quality factor for bass and middle.
02_CanbSydMelbSD27_eng.indd 53

15.01.2007 15:00:00 Uhr

To display the time when the device is off and the vehicle ignition is on, u press the M/OK button >. The display shows "MENU".
Displaying the time with device and ignition switched off
u Press the M/OK button >. The display shows "MENU". u Press the or button 5 repeatedly until "24 H MODE" or "12 H MODE" appears on the display. u Press the or button 5 to change the mode. When you have nished making your changes, u press the M/OK button >. To exit the menu, u press the ESC button 6 or wait approx. 8 seconds.
For every source (radio, SD/MMC, CD changer or AUX-IN), you can perform individual and separate settings for the sound (bass and treble) and the equalizer. The settings for X-Bass and the volume distribution (balance and fader) are performed jointly for all audio sources (except for trafc announcements and telephone/navigation announcements). Fader and balance can be adjusted for trafc reports and telephone calls/navigation announcements only during the announcement.
Selecting 12/24-hour clock mode
Once the hours are set, u press the button 5. The minutes ash. or u Adjust the minutes with the button 5. When you have nished making your changes, u press the M/OK button >. To exit the menu, u press the ESC button 6 or wait approx. 8 seconds.
u Press the or button 5 repeatedly until "CLOCK OFF" or "CLOCK ON" appears on the display. u Press the or button 5 to switch the display between ON and OFF. When you have nished making your changes, u press the M/OK button >. To exit the menu, u press the ESC button 6 or wait approx. 8 seconds.
Equalizer settings The following table shows the bass, treble and equalizer setting options in the "AUDIO" menu. Some settings feature an "E" (for "ENHANCED"), e.g. "E-BASS". These settings are performed in the "ENHANCED" submenu. Note: The table does not contain all the settings that are possible in the menus "AUDIO" and "ENHANCED". Audio BASS

Level (GAIN) Frequency (FREQ) -7 to +7

TREBLE E-BASS

-7 to +7 60 Hz, 80 Hz, 100 Hz or 200 Hz 1.0, 1.25, 1.5 or 2.0

ENHANCED E-TREBLE

10 kHz, 12.5 kHz, 15 kHz or 17.5 kHz

E-MIDDLE

-7 to +7 0.5 kHz, 1.0 kHz, 1.5 kHz or 2.5 kHz 0.5, 0.75, 1.0 or 1.25

Quality factor (QFAC)

Adjusting bass To adjust the level of the bass, u press the AUDIO button <. "BASS" appears on the display. u Press the button 5 to call up the submenu. "BASS" and the currently set value for the level are displayed. u Press the or button 5 to change the value. When you have nished making your changes, u press the AUDIO button <.
Adjusting TREBLE To adjust the level of the treble, u press the AUDIO button <. "BASS" appears on the display. u Press the or button 5 repeatedly until "TREBLE" appears on the display. u Press the button 5 to call up the submenu. "TREBLE" and the currently set value for the level are displayed. u Press the or button 5 to change the value. When you have nished making your changes, u press the AUDIO button <.
02_CanbSydMelbSD27_eng.indd 54
Adjusting E-TREBLE To adjust the frequency of the treble, u press the AUDIO button <. "BASS" appears on the display. u Press the or button 5 repeatedly until "ENHANCED" appears on the display. u Press the M/OK button > to display the submenu. "E-BASS" appears on the display. u Press the or button 5 repeatedly until "E-TREBLE" appears on the display.
02_CanbSydMelbSD27_eng.indd 55
Adjusting E-BASS To set the frequency and the quality factor of the bass, u press the AUDIO button <. "BASS" appears on the display. u Press the or button 5 repeatedly until "ENHANCED" appears on the display. u Press the M/OK button > to display the submenu. "E-BASS" appears on the display. u Press the button 5 to call up the submenu. "FREQ" and the currently set value are displayed. u Press the or button 5 to select between "FREQ" (frequency) and "QFAC" (quality factor). u Press the or button 5 to change the selected setting. When you have nished making your changes, u press the AUDIO button <.
Adjusting E-MIDDLE To set the gain, the frequency and the quality factor of the middle, u press the AUDIO button <. "BASS" appears on the display. u Press the or button 5 repeatedly until "ENHANCED" appears on the display. u Press the M/OK button > to display the submenu. "E-BASS" appears on the display. u Press the or button 5 repeatedly until "E-MIDDLE" appears on the display. u Press the button 5 to call up the submenu. "GAIN" and the currently set value are displayed. u Press the or button 5 to select between "GAIN", "FREQ" (frequency) and "QFAC" (quality factor). u Press the or button 5 to change the selected setting. When you have nished making your changes, u press the AUDIO button <.

ENHANCED E-XBASS

0 to Hz, 800 Hz, 2400 Hz, FLAT
Adjusting the X-BASS boost
The X-BASS boost can be set to levels 0 (X-Bass function off) to 3. u Press the AUDIO button <. "BASS" appears on the display. u Press the or button 5 repeatedly until "X-BASS" appears on the display. u Press the button 5 to call up the submenu. "X-BASS" and the currently set value are displayed.
02_CanbSydMelbSD27_eng.indd 57

15.01.2007 15:00:02 Uhr

Display | External audio sources

Display

If you switch on the vehicle illumination, the display brightness switches day mode to night mode. This requires that your car sound system is connected as described in the installation instructions. Your vehicle must feature the corresponding connection option.

External audio sources

External audio sources, such as portable CD players, MiniDisc players or MP3 players, can be connected to the device in two ways. 1. To the rear AUX-IN input (if no CD changer is connected to the device). The SRC button ? allows for selecting the rear AUX-IN input. The display then shows "CD / AUX-IN". Note: An adapter cable is needed to connect an external audio source to the rear AUX-IN input. You can obtain this cable (Blaupunkt no.: 897 093) from your Blaupunkt dealer. 2. To the front AUX-IN socket. As soon as an audio source is connected to the front AUX-IN socket, it can be selected with the SRC button ?.The display then shows "FRONT AUX-IN".
Adjusting the display brightness
You can adjust the display brightness separately for night (DIM NIGHT) and day (DIM DAY) in steps ranging from 1 to 16. u Press the M/OK button >. The display shows "MENU". u Press the or button 5 repeatedly until "DIM DAY" or "DIM NIGHT" appears on the display. u Press the M/OK button > to display the submenu. "DIM DAY" or "DIM NIGHT" and the currently set value are displayed. u Press the or button 5 to adjust the brightness. When you have nished making your changes, u press the M/OK button >. To exit the menu, u press the ESC button 6 or wait approx. 8 seconds.
02_CanbSydMelbSD27_eng.indd 58
Factory settings (Normset)
You can reset the device to the factory settings. Note: Your personal settings are deleted during reset (Normset). u Press the M/OK button >. The display shows "MENU". or button 5 repeatu Press the edly until "NORMSET" appears on the display. u Press the M/OK button > to display the submenu. "NORM OFF" appears on the display. To reset the device to the factory settings, u press the M/OK button > for longer than 4 seconds. "NORM ON" appears on the display and the device is reset.

Fremdgertemassen drfen nicht an der Autoradiomasse (Gehuse) angeschlossen werden.
Installation instructions

Safety instructions

When carrying out installation work and making connections please observe the following safety instructions: Disconnect the negative terminal of the battery! When doing so, please observe the vehicle manufacturers safety instructions. Make sure you do not damage vehicle components when drilling any holes. The cross sections of the positive and negative cables must not be less than 1.5 mm2. Do not connect the vehicles plug connectors to the radio! You can obtain the adapter cable required for your vehicle type from any BLAUPUNKT dealer. Depending on the model, your vehicle may differ from the description provided here. We accept no responsibility for any damages due to incorrect installation or connection or for any consequential damages. If the information provided here is not suitable for your specic instal351
EA_CanbMelbSyd_SD27_EU.indd 351

15.01.2007 14:48:55 Uhr

lation requirements, please contact your Blaupunkt dealer, your vehicle manufacturer or our telephone hotline. When installing an amplier or changer, you must rst connect the device earth connections before connecting the plugs for the line-in or line-out jacks. Earth connection of external devices may not be connected to earth of car sound system (housing).

Notice de montage

Consignes de scurit
Respecter les consignes de scurit suivantes pendant la dure du montage et du branchement. Dbrancher le ple (-) de la batterie ! Respecter les consignes de scurit du constructeur automobile ! Veiller nendommager aucune pice du vhicule en perant des trous. La section du cble (+) et (-) ne doit pas dpasser 1,5 mm2. Ne pas brancher les connecteurs du vhicule sur la radio ! Les cbles dadaptation ncessaires pour le type de vhicule sont disponibles auprs des revendeurs BLAUPUNKT. En fonction du modle, votre vhicule peut diffrer de cette description. Nous dclinerons toute responsabilit en cas de dommages causs par des erreurs de montage ou de connexion et en cas de dommages conscutifs. 352