Radio / CD

Alicante CD34 Freiburg CD34

Operating instructions

194 310

http://www.blaupunkt.com

Open here
SVENSKA NEDERLANDS ITALIANO FRANAIS ENGLISH DEUTSCH

PORTUGUS

ESPAOL

CONTROLS

1 button for opening the detachable control panel (flip-release panel) Button to switch the device on/ off and operate the volume mute feature BND button (band) to select radio mode as the source, to select the FM memory banks and the MW and LW wavebands TS to start the Travelstore function Volume control TRAF button to switch traffic information standby on/off. RDS button to switch the RDS function on/off (Radio Data System). 6 AUDIO button to adjust the bass, treble, balance and fader. To select an equalizer preset. For adjusting the X-BASS function and activating/deactivating it. SRC button to switch between CD, CD changer (if connected) and AUX. : Briefly display the clock time. Arrow buttons MENU button to open the basic settings menu Keys 1 - 6 button to eject the CD from the device

CONTENTS

Road safety.. 30 Installation.. 30 Accessories.. 30 Switching to CD mode. 41 Selecting tracks.. 41 Fast track selection.. 41 Fast searching (audible). 41 Random track play (MIX).. 41 Scanning tracks (SCAN).. 42 Repeating tracks (REPEAT). 42 Pausing playback (PAUSE). 42 Configuring the display. 42 Displaying CD text.. 42 Traffic announcements in CD mode. 43 Ejecting a CD.. 43
DEUTSCH DANSK PORTUGUS ESPAOL SVENSKA NEDERLANDS ITALIANO FRANAIS ENGLISH
Notes and accessories.. 30

CD mode.. 41

Detachable control panel (flip-release panel).. 31 Switching on/off.. 32 Adjusting the volume. 33
Setting the power-on volume. 33 Instantaneously decreasing the volume (mute).. 34 Switching the confirmation beep on/off.. 34 Mute while telephoning (Freiburg CD34).. 34 Telephone audio (Alicante CD34). 35

CD-changer mode.. 44

Switching to CD-changer mode.. 44 Selecting CDs. 44 Selecting tracks.. 44 Fast searching (audible). 44 Configuring the display. 44 Repeating individual tracks or whole CDs (REPEAT).. 44 Random track play (MIX).. 45 Scanning all tracks on all CDs (SCAN)... 45 Pausing playback (PAUSE). 45

Radio mode.. 35

Switching to radio mode. 35 Convenient RDS functions. 35 Selecting the waveband / memory bank.. 36 Tuning into a station.. 36 Setting the sensitivity of station seek tuning. 37 Storing stations.. 37 Storing stations automatically (Travelstore).. 37 Listening to stored stations. 37 Scanning receivable stations (SCAN)... 37 Setting the scanning time. 38 Programme type (PTY). 38 Optimising radio reception. 39 Configuring the display. 39

Traffic information. 40

CLOCK - Time. 46 Sound.. 47 X-BASS.. 48 Configuring the level display. 49 Adjusting the brightness (dimmer) (only Alicante CD34). 49 External audio sources.. 50 Specifications. 50

NOTES AND ACCESSORIES

Thank you for choosing a Blaupunkt product. We hope you enjoy using this new piece of equipment. Please read these operating instructions before using the equipment for the first time. The Blaupunkt editors are constantly working on making the operating instructions clearer and easier to understand. However, if you still have any questions on how to operate the device, please contact your dealer or the telephone hotline for your country. You will find the telephone number printed at the back of this booklet. We provide a manufacturer guarantee for our products bought within the European Union. You can view the guarantee conditions at www.blaupunkt.de or ask for them directly at: Blaupunkt GmbH, Hotline CM/PSS, Robert Bosch Str. 200, D-31139 Hildesheim Germany

Installation

If you want to install your car sound system yourself, please read the installation and connection instructions that follow these operating instructions.

Accessories

Only use accessories approved by Blaupunkt. Remote control The optional RC08 or RC10 remote control allows you to access the most important functions of your car sound system safely and conveniently from your steering wheel. Amplifiers You can use all Blaupunkt and Velocity amplifiers. CD changers You can connect the following Blaupunkt CD changers: CDC A 08, IDC A 09 and CDC A 03. Compact Drive MP3 You can connect the Compact Drive MP3 instead of a CD-changer in order to play MP3 music tracks. If you decide to connect a Compact Drive MP3, you will first need to use a computer to store the MP3 music tracks on the Microdrive hard disk that is inside the Compact Drive MP3. Then, when the Compact Drive MP3 is connected to the car sound system, you can play the tracks like normal CD music tracks. You can operate the Compact Drive MP3 in the same way as a CD changer. Most of the CD-changer functions can also be used with the Compact Drive MP3.

Road safety

Road safety has absolute priority. Only operate your car sound system if the road and traffic conditions allow you to do so. Familiarise yourself with the device before setting off on your journey. You should always be able to hear police, fire and ambulance sirens from afar. For this reason, listen to your car sound system at a reasonable volume level during your journey.

DETACHABLE CONTROL PANEL

DEUTSCH
Detachable control panel (flip-release panel)

Theft protection

The device is equipped with a detachable control panel (flip-release panel) as a way of protecting your equipment against theft. The device is worthless to a thief without this control panel. Protect your device against theft by taking the control panel with you whenever you leave your vehicle. Do not leave the control panel inside your vehicle not even in a hiding place. The control panel has been designed to be easy to use. Note: Never drop the control panel. Never expose the control panel to direct sunlight or other heat sources. Avoid direct skin contact with the control panels electrical contacts. If necessary, clean the contacts with a lint-free cloth and some alcohol.
mately right angles to the device.
Slide the control panel into the devices guides that are positioned on the left and right at the lower edge of the housing. Push the control panel carefully into the bracket until it clicks into place.

RADIO MODE

This device is equipped with an RDS radio receiver. Many of the receivable FM stations broadcast a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). The station name appears in the display as soon as the tuner receives it.

Radio mode

Switching to radio mode
If you are in CD, CD changer or AUX mode,
press the BNDTS button 3.
press the SRC ( ) button 7 repeatedly until the memory bank (e.g. FM1) appears in the display.

Convenient RDS functions

The convenient RDS functions AF (Alternative Frequency) and REGIONAL extend your radios range of functions. AF: If you activate this RDS function, the radio automatically tunes into the best receivable frequency for the station that is currently set. REGIONAL: At certain times, some radio stations divide their programme into regional programmes providing different content. You can use the REGIONAL function to prevent the car radio from switching to alternative frequencies that are transmitting different programme content.
Note: REGIONAL must be activated/deactivated separately in the menu. Switching REGIONAL on/off Press the MENU button 9. Press the or button 8 repeatedly until REG appears in the display. OFF or ON is displayed alongside REG. To switch REGIONAL on/off, press the or button 8. Press the MENU button 9. Switching the RDS function on/off If you want to use the RDS functions (AF and REGIONAL), press and hold down the TRAF/ RDS button 5 for longer than two seconds. The RDS functions are active when an RDS symbol lights up in the display.

Tuning into a station

There are various ways of tuning into a station. Automatic station seek tuning

Press the

button 8.
The radio tunes into the next receivable station. Tuning into stations manually You can also tune into stations manually. Note: You can only tune into stations manually if the RDS function is deactivated.
Selecting the waveband / memory bank

This device can receive programmes broadcast over the FM frequency range as well as the MW and LW (AM) wavebands. There are three memory banks available for the FM waveband (FM1, FM2 and FMT) and one for each of the MW and LW wavebands. Six stations can be stored in each memory bank. To switch between the FM memory banks (FM1, FM2 and FMT) and the MW and LW wavebands, briefly press the BNDTS button 3. 36
Browsing through broadcasting networks (only FM) If a radio station provides several programmes, you have the option of browsing through its so-called broadcasting network. Note: The RDS function must be activated before you can use this feature.
or button 8 to switch to the next station on the broadcasting network.
Note: When using this feature, you will only be able to switch to stations that you have received once before already. To receive the stations, use the Scan or Travelstore function.
Setting the sensitivity of station seek tuning
You can choose whether the radio should only tune into stations providing good reception or whether it can also tune into those with a weak reception.
Storing stations automatically (Travelstore)
You can automatically store the six stations providing the best reception in the region (only FM). The stations are stored in the FMT memory bank. Note: Any stations that were previously stored in this memory bank are deleted in the process.
Press the MENU button 9. Press the or button 8 repeatedly until SENS appears in the display.
Press and hold down the BNDTS
button 3 for longer than two seconds. The storing procedure begins. FM TSTORE appears in the display. After the process has completed, the radio will play the station that is stored in memory location 1 of the FMT memory bank.
The display shows the currently set sensitivity level. SENS HI6 means that the tuner is set to the highest sensitivity setting. SENS LO1 means it is set to the lowest sensitivity setting.
Set the sensitivity level that you
buttons 8. want using the When you have finished making your changes,

press the MENU button 9.

Note: You can set different sensitivity levels for FM and MW or LW (AM).
Listening to stored stations Select the memory bank or waveband.
Press the station button 1 - 6 :
that corresponds to the station that you want to listen to.

Storing stations

Storing stations manually
Scanning receivable stations (SCAN)
You can use the scan function to briefly play all the receivable stations. You can set the scanning time in the menu to between 5 and 30 seconds. Starting SCAN
Select the memory bank (i.e. FM1,
FM2, FMT) that you want or one of the wavebands (MW or LW). Tune into the station that you want.
Press and hold down one of the
station buttons 1 - 6 : for longer than two seconds to assign the station to that button.
Press and hold down the MENU
button 9 for longer than two seconds. 37
Scanning begins. SCAN appears briefly in the display followed by a flashing display of the current station name or frequency. Cancelling SCAN and continuing listening to a station You can use the PTY function to select stations of a particular programme type. PTY-EON If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type. Note: If the tuner does not find a station that corresponds to the selected programme type, you will hear a beep and NO PTY appears briefly in the display. The radio will then retune to the station that it received last. If the tuned radio station or another station on the broadcasting network broadcasts your selected programme type at a later point in time, the radio will automatically switch from the currently tuned station or from CD mode or CDchanger mode to the station whose programme type matches the one you selected. Switching PTY on/off

Press the MENU button 9.

Scanning stops and the radio continues playing the station that it tuned into last.
Setting the scanning time Press the MENU button 9. Press the or button 8 repeatedly until SCAN TIME appears in the display. Set the scanning time that you buttons 8. want using the When you have finished making your changes,
Note: The scanning time that you set is also applied by the system to scanning carried out in CD and CDchanger mode.

Programme type (PTY)

Besides transmitting the station name, some FM stations also provide information on the type of programme that they are broadcasting. Your car radio can receive and display this information. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS 38

Press the MENU button 9. Press the or button 8 repeatedly until PTY ON or PTY OFF appears in the display.
or button 8 to switch PTY ON or OFF.
Selecting the PTY language You can select the language in which the programme types are displayed. The following are available: DEUTSCH, ENGLISH and FRANAIS. Treble reduction feature during interference (HICUT) The HICUT function improves reception during poor radio reception (only FM). If interference occurs, the system automatically reduces the treble thus reducing the interference level. Switching HICUT on/off Press the MENU button 9. Press the or button 8 repeatedly until HICUT appears in the display. Press the or button 8 to adjust the HICUT setting. HICUT 0 means that no automatic reduction of the treble and interference level will be made; HICUT 1 means that a maximum reduction will be made.
Optimising radio reception
Press the MENU button 9. Press the or button 8 repeatedly until PTY LANG appears in the display.
Set your preferred language using
buttons 8. the When you have finished making your changes,
Selecting a programme type and starting seek tuning
The current programme type appears in the display.
Press the MENU button 9. Configuring the display
In radio mode you have the option of displaying the waveband together with the memory location and the time or the station name. Press the MENU button 9. Press the or button 8 repeatedly until TUN DISP appears in the display. Press the or button 8 to switch between CLOCK and FREQUENCY. Select FREQUENCY if you want to display the station name / frequency.
If you want to select another programme type, you can do so by pressing the or button 8 whilst this display is visible. The selected programme type appears briefly in the display.
or button 8 to start seek tuning. The radio will then tune into the next station that it finds that corresponds to your selected programme type.
Press the MENU button 9 twice.

TRAFFIC INFORMATION

Traffic information
Your device is equipped with an RDSEON receiver. EON stands for Enhanced Other Network. Whenever a traffic announcement (TA) is broadcast, the system switches automatically from a station that does not provide traffic reports to the appropriate traffic information station within the broadcasting network that does. Once the traffic report has been played, the system will switch back to the programme that you were listening to before. If you hear the warning sound, you can either switch off traffic information priority or tune into a station that broadcasts traffic information.

Setting the volume for traffic announcements Press the MENU button 9. Press the or button 8 repeatedly until TA VOLUME appears in the display.
Adjust the volume using the
Switching traffic information priority on/off Briefly press the TRAF button 5.
Traffic announcement priority is active when a traffic-jam symbol lights up in the display. Note: You will hear a warning sound: if you leave the reception area of a traffic information station that you are currently listening to. if, while listening to a CD or CD in the changer, you leave the reception area of a traffic information station that the system is tuned into, and the subsequent automatic search cannot find a new traffic information station. if you retune the radio from a traffic information station to a station that does not broadcast traffic information. 40
Note: Using the volume control 4, you can also adjust the volume during a traffic announcement for the duration of that announcement. Note: You can adjust the sound settings and volume distribution settings for traffic announcements. For further details, refer to the chapter entitled Sound.

CD MODE

You can use this device to play standard audio CDs, CD-Rs and CD-RWs with a diameter of 12 or 8 cm. Risk of severe damage to the CD drive! Contoured CDs (shape CDs) are not suitable for playback in this unit. We accept no responsibility for any damage to the CD drive that may occur as a result of the use of unsuitable CDs.

CD mode

If a CD is already inserted in the drive, press the SRC ( ) button 7 repeatedly until CD appears in the display. Playback begins from the point at which it was last interrupted.
Selecting tracks Press one of the arrow buttons 8
to select the next or previous track. If you press the or button 8 once, the player will play the current track again from the beginning.

Switching to CD mode

If there is no CD inserted in the drive, press the button 1. The flip-release panel opens. Gently insert the CD with its printed side uppermost into the drive until you feel some resistance. The drive draws in the CD automatically. You must not hinder or assist the drive as it draws in the CD. Gently close the control panel whilst exerting a little pressure until you feel it click into place. The CD starts playing.

Fast track selection

To quickly select tracks backwards or forwards, press and hold down one of the / buttons 8 until fast-reverse / fast-forward track selection begins.

Fast searching (audible)

To fast search backwards or forwards, press and hold down one of the buttons 8 until fast searching backwards / forwards begins.
Random track play (MIX) Press the 5 MIX button :.
MIX CD appears briefly in the display and the MIX symbol lights up. The next randomly selected track will then be played. Cancelling MIX Press the 5 MIX button : again. MIX OFF appears briefly in the display and the MIX symbol disappears. 41

Note: If the ignition was switched off before you inserted the CD, you will first have to switch on the device by pressing button 2 in order to start playing the CD.

Scanning tracks (SCAN)

You can briefly play all the tracks on the CD.
Pausing playback (PAUSE) Press the 3 button :.
PAUSE appears in the display. Cancelling pause button : while in pause mode. Playback is resumed.
button 9 for longer than two seconds. The next track will then be played briefly. Note: You can set the scanning time. For further details, please read the section entitled Setting the scanning time in the Radio mode chapter. Stopping SCAN and continuing listening to a track

Press the 3

Configuring the display
You can choose between two display types for CD mode: Track number and clock time (CLOCK) Track number and playing time (PLAYTIME)
To stop scanning, press the MENU
button 9. The currently scanned track will then continue to be played normally.
Press the MENU button 9. Press the or button 8 repeatedly until CD DISP appears in the display. or button 8 to switch between PLAYTIME and CLOCK.
Repeating tracks (REPEAT)
If you want to repeat a track,
press the 4 RPT button :.
RPT TRCK appears briefly in the display and the RPT symbol lights up. The track is repeated continuously until you deactivate RPT. Cancelling REPEAT If you want to deactivate the repeat function,
Press the MENU button 9 twice. Displaying CD text
Some CDs include CD text. The CD text might contain the names of the artist, album and tracks. You can allow the CD text to be displayed as scrolling text every time you switch to another track. The standard display will appear again after the whole CD text has been shown once. For further information, read the section entitled Configuring the display.
press the 4 RPT button : again.
RPT OFF appears briefly in the display and the RPT symbol disappears. Normal playback is then resumed.
Press the MENU button 9. Press the or button 8 repeatedly until CD TEXT appears in the display.

Switching CD text on/off

Switch the CD text function on
(TEXT ON) or off (TEXT OFF) using the or button 8. When you have finished making your changes,
Note: If a CD is ejected, the drive will automatically draw it back in again after 10 seconds. You can also eject CDs whilst the device is switched off or whilst another audio source is activated.

press the MENU button 9 twice. Traffic announcements in CD mode
If you wish to receive traffic announcements in CD mode,

press the TRAF button 5.

Traffic announcement priority is active when a traffic-jam symbol lights up in the display. For further details, read the chapter entitled Traffic information reception.
Ejecting a CD Press the button 1.
The flip-release panel opens out towards you.
Press the eject button ; next to
the CD compartment. The CD is ejected.
Remove the CD and close the control panel.

CD-CHANGER MODE

CD-changer mode
Note: Information on handling CDs, inserting CDs and operating the CD changer can be found in the operating instructions supplied with your CD changer.
There are five display options available for CD-changer mode: Track number and playing time Track number and clock time CD number and track number CD number and playing time CD number and clock time
Switching to CD-changer mode Press the SRC ( ) button 7 repeatedly until CHANGER appears in the display. The device starts playing the first CD that the CD changer detects.
Press the MENU button 9. Press the or button 8 repeatedly until CDC DISP appears in the display. or button 8 repeatedly until the option that you want appears in the display.

Selecting CDs

To move up or down to another CD,

press the

or button 8 once or several times.
Press the MENU button 9 twice. Repeating individual tracks or whole CDs (REPEAT)
To repeat the current track,
Note: The device will ignore empty CD slots in the changer and slots containing invalid CDs.
briefly press the 4 RPT button :.
RPT TRCK appears briefly and RPT lights up in the display. To repeat the current CD,

Selecting tracks

To move up or down to another track on the current CD,
press and hold down the 4 RPT
button : for longer than two seconds. RPT DISC appears briefly and RPT lights up in the display.
To fast search backwards or forwards,
press and hold down one of the
buttons 8 until fast searching backwards / forwards begins.
To stop scanning, briefly press the MENU button 9. The currently scanned track will then continue to be played normally. Note: You can set the scanning time. For further details, please read the section entitled Setting the scanning time in the Radio mode chapter.
Cancelling REPEAT To stop the current track or current CD from being repeated,

Stopping SCAN

RPT OFF appears and RPT disappears from the display.

Random track play (MIX)

To play the tracks on the current CD in random order,
briefly press the 5 MIX button :.

MIX CD appears briefly and MIX lights up in the display. To play the tracks on all inserted CDs in random order, press and hold down the 5 MIX button : for longer than two seconds. MIX ALL appears briefly and MIX lights up in the display. Cancelling MIX Briefly press the 5 MIX button :. MIX OFF appears and MIX disappears from the display.
Scanning all tracks on all CDs (SCAN)
To briefly play all the tracks on all the inserted CDs in ascending order, press and hold down the MENU button 9 for longer than two seconds. TRK SCAN appears in the display and the number of the current track flashes.

CLOCK - TIME

CLOCK - Time
Displaying the clock time
To briefly display the clock time,
or button 8 to switch between the modes. When you have finished making your changes,
Press and hold down the SRC ( )
button 7 until the clock time appears in the display.
press the MENU button 9. Displaying the time continuously when the device is off and the ignition is on
To display the time when the device is off and the vehicle ignition is on,

Setting the clock time

To set the clock time,
press the MENU button 9. Press the or button 8 repeatedly until CLOCK SET appears in the display. button 8.
MENU appears in the display.
The time appears in the display. The hours flash and can be adjusted.
or button 8 repeatedly until CLOCK OFF or CLOCK ON appears in the display.
Adjust the hours using the
buttons 8. Once the hours are set,

button 8. /

The minutes flash.
or button 8 to switch between the ON/OFF settings. When you have finished making your changes,
Adjust the minutes using the

buttons 8.

press the MENU button 9. Briefly displaying the time when the device is switched off
To briefly display the time when the device is off,
Press the MENU button 9 twice. Selecting 12/24-hour clock mode Press the MENU button 9.
press the SRC ( ) button 7.
The time is displayed for eight seconds.
or button 8 repeatedly until 24 H MODE or 12 H MODE appears in the display.
You can adjust the sound settings (bass and treble) separately for each audio source (radio, CD, CD changer, AUX and traffic announcements). The volume distribution settings (balance and fader) apply to all the audio sources. Note: You can only adjust the sound settings for traffic announcements whilst a traffic announcement is actually being played.
Setting the left/right volume distribution (balance)
To adjust the left/right volume distribution (balance),
press the AUDIO button 6.
BASS appears in the display.

Press the Press the

button 8 repeatedly until BAL appears in the display.
Adjusting the bass Press the AUDIO button 6.
BASS appears in the display. or button 8 to adjust the bass. When you have finished making your changes,

or button 8 to adjust the balance (right/left). When you have finished making your changes,
press the AUDIO button 6. Adjusting the front/back volume distribution (fader)
To adjust the front/back volume distribution (fader),
press the AUDIO button 6. Adjusting the treble Press the AUDIO button 6.
button 8 repeatedly until FADER appears in the display.
button 8 repeatedly until TREB appears in the display.
or button 8 to adjust the treble. When you have finished making your changes,
or button 8 to adjust the fader (front/back). When you have finished making your changes,

Equalizer presets

This device is equipped with an equalizer that has been preset with settings for the ROCK, POP and CLASSIC music styles. To select an equalizer preset,

X-BASS

The X-BASS feature can be used to boost the bass at low volume levels. Note: You can adjust the X-Bass settings separately for each audio source (radio, CD, CD changer and AUX). Adjusting the X-BASS boost settings You can set the X-BASS boost in steps ranging from 1 to 3. XBASS OFF means that the X-BASS feature is switched off.
button 8 repeatedly until POP, ROCK, CLASSIC or OFF appears in the display.
or button 8 to select one of the presets or select OFF to switch off the equalizer. If you select one of the presets, SOUND lights up in the display together with the selected setting. When you have finished making your changes,
Press the AUDIO button 6.
button 8 repeatedly until XBASS appears in the display together with the current setting.
or button 8 repeatedly until the setting that you want appears in the display. When you have finished making your changes,

LEVEL DISPLAY

Configuring the level display
The level display temporarily provides you with a symbolic representation of the volume and audio settings whilst you are adjusting them. When you are not changing any settings, the level display depicts the sound systems output level. You can switch the level display on/off.

BRIGHTNESS (DIMMER)

Adjusting the brightness (dimmer) (only Alicante CD34)
The display brightness will change when the headlights are turned on/off if your car sound system is connected as described in the installation instructions and your vehicle is equipped with the appropriate connections. You can adjust the display brightness separately for night and day in steps ranging from 1 9. We recommend a setting of 6.
or button 8 to switch between PEAK ON and PEAK OFF. When you have finished making your changes,
or button 8 to switch between the brightness levels. When you have finished making your changes,
or button 8 repeatedly until DIM DAY or DIM NIGHT appears in the display.
or button 8 repeatedly until PEAK LVL appears in the display.

EXTERNAL AUDIO SOURCES

External audio sources
Instead of connecting a CD changer, you can connect another audio source equipped with a line output. Audio sources can, for example, be portable CD players, MiniDisc players or MP3 players. The AUX input must be activated in the menu. If you want to connect an external audio source, you will need an adapter cable. You can obtain this cable (Blaupunkt no.: 897 093) from your authorised Blaupunkt dealer.

SPECIFICATIONS

Specifications

Amplifier

Output power: 4 x 25 watts sine in accordance with DIN at 14.4 V 4 x 45 watts max. power
Wavebands in Europe: FM : 87.5 - 108 MHz MW : 531 - 1602 kHz LW : 153 - 279 kHz FM frequency response: 35 - 16,000 Hz
Switching the AUX input on/off Press the MENU button 9.
or button 8 repeatedly until AUX OFF or AUX ON appears in the display.
Frequency response: 20 - 20,000 Hz
or button 8 to switch AUX on/off. When you have finished making your changes,

Pre-amp Out

4 channels: 3V
Note: If the AUX input is switched on, you can select it by pressing the SRC button 7.

Input sensitivity

AUX input : 2 V / 6 k

Subject to changes! 50

Service-Nummern / Service numbers / Numros du service aprsvente / Numeri del servizio di assistenza / Servicenummers / Telefonnummer fr service / Nmeros de servicio / Nmero de servio / Servicenumre
Country: Germany Austria Belgium Denmark Finland France Great Britain Greece Ireland Italy Luxembourg Netherlands Norway Portugal Spain Sweden Switzerland (D) (A) (B) (DK) (FIN) (F) (GB) (GR) (IRL) (I) (L) (NL) (N) (P) (E) (S) (CH) Phone: 0180-5000225 01-0 02-360 09-01-01-0030-01-4149400 02-023-66-01-902-120234 08-7501500 01-8471644 02-01-0800-118922 0212-3350677 Fax: 05121-01-391 02-44-09-01-01-0030-01-4598830 02-023-66-01-916-467952 08-7501810 01-8471650 02-01-022-8771260 0212-3460040 708-6817188 +55-2773 +604-WWW: http://www.blaupunkt.com

Price & Application Guide MGF & MG TF

MAY 2005

This section contains vehicle specific product Please refer to the XPart section for more general accessories If you have any questions please fax the Accessories Technical Helpline 2359 For older model applications please refer to the previous Price and Application Guide (November 04) or Range Brochure AKM684 See Supplementary Section Shipped 'Direct from Supplier'

MGF & MG TF

PRODUCT PART NUMBER QTY REQ RRP () EACH EX VAT FITTING TIME (HOURS) FULLY FITTED PRICE () INC VAT & LABOUR COMMENTS

STYLING

Alloy Wheel - Minilite 8 Spoke (6J x 15) Alloy Wheel - Centre Cap Alloy Wheel - Nuts Alloy Wheel - Locking Wheel Nut Kit Alloy Wheel - 15" Square Spoke (6J x 15) Alloy Wheel - Centre Cap Alloy Wheel - Nuts Alloy Wheel - Locking Wheel Nut Kit Alloy Wheel - 16" Square Spoke (7J x 16) Alloys - Bump Stop Kit Alloys - Centre Cap Alloys - Wheel Nuts Alloys - Locking Wheel Nut Kit Alloy Wheel - 6 Spoke Alulite (7J x 16) Alloys - Bump Stop Kit Alloys - Centre Cap Alloys - Wheel Nuts Alloys - Locking Wheel Nut Kit Alloy Wheel - Multispoke (7J x 16) Alloys - Bump Stop Kit Alloys - Centre Cap Alloys - Wheel Nuts Alloys - Locking Wheel Nuts Alloy Wheel - Multispoke (7J x 16) Alloys - Bump Stop Kit Alloys - Centre Caps Alloys - Wheel Nuts Alloys - Locking Wheel Nuts Alloy Wheel - 11 Spoke (7J x 16) Alloys - Bump Stop Kit Alloys - Centre Caps Alloys - Wheel Nuts Alloys - Locking Wheel Nuts Alloy Wheel - 11 Spoke (7J x 16) Alloys - Bump Stop Kit Alloys - Centre Caps Alloys - Wheel Nuts Alloys - Locking Wheel Nuts Alloy Wheel - Lightweight (7J x 16) Alloys - Bump Stop Kit Alloys - Centre Caps Alloys - Wheel Nuts Alloys - Locking Wheel Nuts Alloys - Valve Caps - MG Badged RRC112882MNH DTC100630MNH NAM9077 XPT000008ACC RRC112832MNH DTC100630MNH NAM9077 XPT000008ACC RRC113740MNH RNV100050 DTC100630MNH NAM9077 XPT000008ACC RRC110260MNH RNV100050 DTC100630MNH NAM9077 XPT000008ACC RRC110460MNH RNV100050 DTC100630MNH NAM9077 XPT000008ACC RRC110460LEH RNV100050 DTC100630LEH NAM9077 XPT000008ACC RRC002630MNH RNV100050 DTC100630MNH NAM9077 XPT000008ACC RRC002630MBM RNV100050 DTC100630MVY NAM9077 XPT000008ACC RRC002040LEH RNV100050 DTC000080LEH NAM9077 XPT000008ACC RRF1
142.05 6.21 7.08 20.91 134.00 6.21 7.08 20.91 188.79 71.11 6.21 7.08 20.91 188.79 71.11 6.21 7.08 20.91 188.79 71.11 6.21 7.08 20.91 178.10 71.11 7.38 7.08 20.91 174.84 71.11 6.21 7.08 20.91 166.24 71.11 7.02 7.08 20.91 460.16 71.11 9.43 7.08 20.91 17.25

849.42

811.58

1,152.65

Supercedes RRC112880MNH (order this first) excludes tyre and associated labour Recommended tyre - Continental Conti - Front 185/55x15, Rear 205/50x15 Fully fitted price :- 4 wheels, 4 centre caps, 12 wheel nuts, 4 locking nuts. McGard locking wheel nut kit - 4 nuts, 1 removal tool Supercedes RRC112830MNH (order this first) excludes tyre and associated labour Recommended tyre - Continental Conti - Front 185/55x15, Rear 205/50x15 Fully fitted price :- 4 wheels, 4 centre caps, 12 wheel nuts, 4 locking nuts. McGard locking wheel nut kit - 4 nuts, 1 removal tool Recommend Goodyear Eagle F1 Unidirectional - Front 195/45x16, Rear 215/40x16 Some alloys available with tyres - RRC117460 & RRC117470 Fully fitted price includes bump stop kit but excludes tyres and associated labour Fully fitted price -wheels,centre caps, 12 wheel nuts, 4 locking nuts, bump stop kit McGard locking wheel nut kit :- 4 nuts, 1 removal tool Recommend Goodyear Eagle F1 Unidirectional - Front 195/45x16, Rear 215/40x16 Some alloys available with tyres - RRC110740 & RRC110750 Fully fitted price includes bump stop kit but excludes tyres and associated labour Fully fitted price - 4 wheels, 4 centre caps, 12 wheel nuts, 4 locking nuts, bump stop kit McGard locking wheel nut kit :- 4 nuts, 1 removal tool Recommend Goodyear Eagle F1 Unidirectional - Front 195/45x16, Rear 215/40x16 Some alloys available with tyres - RRC110760 & RRC110770 Fully fitted price includes bump stop kit but excludes tyres and associated labour Fully fitted price - 4 wheels, 4 centre caps, 12 wheel nuts, 4 locking nuts, bump stop kit McGard locking wheel nut kit 4 nuts, 1 removal tool Fully fitted price includes bump stop kit but excludes tyres and associated labour Recommended tyre - Goodyear Eagle F1 Unidirectional - Front 195/45x16, Rear 215/40x16 Fully fitted price :- 4 wheels, 4 centre caps, 12 wheel nuts, 4 locking nuts, bump stop kit McGard locking wheel nut kit 4 nuts, 1 removal tool Fully fitted price includes bump stop kit but excludes tyres and associated labour Recommended tyre - Goodyear Eagle F1 Unidirectional - Front 195/45x16, Rear 215/40x16

1,107.91

1,087.09 Fully fitted price :- 4 wheels, 4 centre caps, 12 wheel nuts, 4 locking nuts, bump stop kit McGard locking wheel nut kit 4 nuts, 1 removal tool Fully fitted price includes bump stop kit but excludes tyres and associated labour Recommended tyre - Goodyear Eagle F1 Unidirectional - Front 195/45x16, Rear 215/40x16
1,045.77 Fully fitted price :- 4 wheels, 4 centre caps, 12 wheel nuts, 4 locking nuts, bump stop kit McGard locking wheel nut kit 4 nuts, 1 removal tool Fully fitted price includes bump stop kit but excludes tyres and associated labour Recommended tyre - Goodyear Eagle F1 Unidirectional - Front 195/45x16, Rear 215/40x16
2,443.22 Fully fitted price :- 4 wheels, 4 centre caps, 12 wheel nuts, 4 locking nuts, bump stop kit McGard locking wheel nut kit 4 nuts, 1 removal tool 20.27
Price & Application Guide
RRP () EACH EX VAT FITTING TIME (HOURS)
PRODUCT PART NUMBER QTY REQ FULLY FITTED PRICE () INC VAT & LABOUR COMMENTS

AUDIO / NAVIGATION

1 - 6 Disc Autochanger 1 - Installation Kit (Includes Data Cable) 2 - Kenwood 6 Disc Autochanger 2 - Installation Kit 3 - Sony Autochanger Adaptor Kit

CD Players

VUW100060 VUD100380 XQE000250 VUD000130 XPT002900AC XPT000076ACB XPT000077ACB XPT000119ACA XPT000098ACA XPT000078ACB XPT000120ACA XPT000121ACA XPT000118ACA XPT000081ACA XPT000026ACA YIB000240 VUB001450 XPT000056ACC
389.01 40.17 253.35 20.72 41.83 293.33 120.00 110.48 95.95 103.81 239.48 420.76 300.95 120.32 110.49 1274.40 10.06 460.00

1.00 1.00

548.94 366.68 49.15 344.66 141.00 129.81 112.74 121.98 281.39 494.39 353.62 141.38 183.41 1531.57 562.83
Fully fitted price includes installation kit & data cable. MGF ONLY Cannot be fitted with single CD player or C23 Radio/Cassette MGT ONLY F For Autochanger with C42 All makes (ISO connectors) See XPart section for adaptors. All makes (ISO connectors) See XPart section for adaptors. Non RDS - non changer control - no paddle operation See XPart section for adaptors. Supercedes XPT000027ACA See XPart section for adaptors. All makes (ISO connectors) See XPart section for adaptors. All makes (ISO connectors) See XPart section for adaptors. All makes (ISO connectors) See XPart section for adaptors. All makes (ISO connectors) See XPart section for adaptors. For use with Blaupunkt head units onl. See XPart section for adaptors. All makes. See XPart section for adaptors.
Blaupunkt Woodstock DAB (digital radio) Blaupunkt Freiburg CD34 (single CD player) Sony CDX-S1000 (single CD Player) Sony CDX-S2000 (single CD player)

MP3 Players

Blaupunkt Santa Cruz MP34 Sony CDX-F5500 Sony CDX-M8800 Sony CDX-7500

CD Autochangers

Blaupunkt CDC 10 disc autochanger Sony CDX-Tdisc autochanger Navigation Becker Traffic Pro - Satalite Navigation Installation Kit for Becker Traffic Pro Blaupunkt single din (E1) - Black

1.20 0.50 0.50

Evesham Mio PDA Nav system Garmin Etrex Garmin 2610 Garmin 2620 Trafficmaster Smart Nav Trafficmaster Trackstar2
XPT000131ACA XPT003001AC XPT000124ACA XPT000124ACB XPT003002AC XPT001001AC

1 1+ 1 1

340.42 104.69 735.29 843.37 535.72 885.33
399.99 123.01 863.96 990.96 629.47 1040.26

STOWAGE

Hard Top Home Storage Facility Hood Stowage Cover CD Stowage Loadspace - Luggage Net (Rear) Hood Stowage Cover - Black Hood Stowage Cover - Red Hood Stowage Cover - Yellow Hood Stowage Cover - Blue VUB101340 DSD000020PMA VUB105600 ESK100260 XPT000123PMA XPT000123CXP XPT000123FXP XPT000123JXP 18.75 176.23 37.56 23.93 97.78 97.78 97.78 97.78 22.03 207.07 44.13 28.12 114.89 114.89 114.89 114.89 Can be mounted in cockpit glovebox (non Air Con cars only) or in the loadspace

TOURING

Exhaust Finisher Exhaust - XPower Thruflo Exhaust - XPower Thruflo Exhaust - Elbow Joint Exhaust - Gasket Heated Seat Kit Luggage carrier - Black Luggage carrier - Stainless Steel Mobile Phone Mounting Bracket (mechanical) Power Hood Ski Clips (Pair) Suit Carrier - MG Badged Tool Kit - MG Badged Touring Kit Bag - MG Badged DUB100620 XPT000039ACB XPT000039ACB XPT000039ACA WCM100480 VUB003110 VTF100000 VTF100050 XPT000103ACB VUB105510 VTG100010 VUP100060 KBK100420 VUB101200PMA 39.96 267.81 267.81 14.80 0.84 142.32 182.20 150.00 14.29 842.29 65.61 93.74 56.24 19.93 46.95 314.68 391.35 2.00 256.53 214.09 176.25 16.79 1090.15 77.09 110.14 66.08 23.42 Fully fitted price includes 2 x Exhaust Finishers. MGF ONLY From vin 522573 on Up to vin 522573 Pair
Requires Black Luggage Carrier VTF100000 Fits into indentation In loadspace
RRP () EACH EX VAT FITTING TIME Hours

PROTECTION

Dust Cover - Whole Car (MG Badged) Headlamp Protectors MG Badged Headlamp Protectors MG Badged Mats - Fabric RHD Mats - Fabric LHD Mats - Rubber RHD (& LHD) Mud Guards - Black (Front Pair) - MG Badged Mud Guards - Black (Rear Pair) - MG Badged Mud Guards - Black (Front Pair) - MG Badged Mud Guards - Black (Rear Pair) - MG Badged Roll Hoop Windstop Stowage Cover Seat Protector - Drivers's (MG Badged) Tonneau Cover - Cockpit (Black) Touch-Up Paint Aerosols (single) Touch-Up Paint Aerosols (Twin Pack) Touch-Up Paint Pencils (single) Touch-Up Paint Pencils (Twin Pack) Windscreen Protector - (MG Badged) Windstop Hoods & Hard Tops Hard Top Cover - (MG Badged) Hard Top - Primed Hard Top - Le Mans Green Hard Top - XPower Grey Hard Top - Solar Red Hard Top - Trophy Yellow Hard Top - Sienna Gold Hard Top - British Racing Green 3 Hard Top - Tahiti Blue Hard Top - Anthracite Hard Top - Starlite Hard Top - Trophy Blue Hard Top - Dover White Hard Top - Royal Blue Hard Top Fitting Kit Hood - Dust Cover Hood - Tonneau Hood - Tonneau Xpower Sportster Hood - Black Xpower Sportster Hood - Beige Xpower Sportster Hood - Green Xpower Sportster Hood - Grey Xpower Sportster Hood - Blue Xpower Sportster Hood - Driftwood Fleck Xtra Sportster Hood - Red with Black Lining Xtra Sportster Hood - Yellow with Black Lining Xtra Sportster Hood - Blue with Black Lining VUS100070PMA XBV000160 XBV100380 EAH103900PMA EAH103890PMA EAH103830LNF CAS000260PML CAT000320PML CAS100690PML CAT100820PML DSD000030PMA VUK100040PMA DSD100630PMA Various Various Various Various VUS100060PMA VUQ100280 VUK100030PMA DXU000060LML DXU000060HFN DXU000060LEF DXU000060CMU DXU000060FAR DXU000060GUF DXU000060HFF DXU000060JRJ DXU000060LQW DXU000060MBB DXU000060JFV DXU000060NDJ DXU000060JFM VUB000090 XPT000122ACA DSD100590PMA DSD000070PMA XPT000107PMA XPT000107RIO XPT000107HZP XPT000107LZD XPT000107JZP XPT000107SBT XPT000107CXP XPT000107FXP XPT000107JXP 99.13 44.06 39.84 38.00 38.00 23.93 30.60 30.60 25.44 21.26 215.88 21.32 253.17 3.83 6.80 2.55 4.25 16.64 177.33 70.31 1277.67 1497.96 1497.96 1497.96 1497.96 1497.96 1497.96 1497.96 1497.96 1497.96 1497.96 1497.96 1497.96 14.10 26.67 176.33 176.33 533.33 533.33 533.33 533.33 533.33 613.33 613.33 613.33 613.33 116.48 51.77 46.81 44.65 44.65 28.12 58.28 58.28 52.22 43.31 253.66 25.05 327.39 4.50 7.99 3.00 4.99 19.55 230.69 82.61 1501.26 1760.10 1760.10 1760.10 1760.10 1760.10 1760.10 1760.10 1760.10 1760.10 1760.10 1760.10 1760.10 16.57 31.34 208.17 208.17 626.66 626.66 626.66 626.66 626.66 720.66 720.66 720.66 720.66 MGTF ONLY MGF ONLY

0.50 0.50 0.50 0.50

Dealer fit recommended - (cut to fit) Suitable for RHD or LHD Paintable. Fully fitted price does not include painting.MGTF ONLY. Paintable. Fully fitted price does not include painting.MGTF ONLY. Paintable. Fully fitted price does not include painting.MGF ONLY Paintable. Fully fitted price does not include painting.MGF ONLY Covers the hood and provides a windstop feature on Mark1 roll hoops
For colour and part number information, refer to Paint Wall Chart AKM496 For colour and part number information, refer to Paint Wall Chart AKM496 For colour and part number information, refer to Paint Wall Chart AKM496 For colour and part number information, refer to Paint Wall Chart AKM496
Includes Hood Dust Cover XPT000122ACA Includes Hood Dust Cover XPT000122ACA Includes Hood Dust Cover XPT000122ACA

SAFETY

Basic Bulb Kit Rechargeable Torch Fire Extinguisher - Brushed Alloy Fire Extinguisher Installation Kit for KDB000020 Fire Extinguisher - Carbon Fibre Fire Extinguisher Installation Kit for KDB000010 Fire Extinguisher Kit - MG Badged Foglamp LH Foglamp LH Foglamp Fitting Kit Foglamp Switch Foglamp Bracket Foglamp Bracket Foglamp Glue Foglamps (Pair) Foglamp Protectors Foglamp LH Foglamp RH Foglamp Fitting Kit Foglamp Switch Foglamp Bracket Foglamp Bracket Foglamp Fixings Headlamp Dip Beam Converters Heated Washer Jets High Mounted Stop Lamp Parking Aid - Rear Roadside Lamp Roll Hoops Stainless Steel Roll Hoops White Silver Roll Hoop Trim Kit Snow Chains (Pair) Warning Triangle Warning Triangle Zero Temperature Warning Indicator VUB002890 VUB100200 KDB000020 KDB000040 KDB000010 KDB000040 KDB100090 XBJ105510 XBJ105500 XBQ000120 YUG102590PMP DPL000280 DPL000290 DYM000020 XBQ100950 XBV100480 XBJ105510 XBJ105500 XBQ000140 YUG102590PMP DPL000180 DPL000190 DYP105510 XBV100580 VUB100220 XFN100180 VUB104430 VUT100010 XPT000108MMM XPT000108MWK XPT000136ACA VUJ100030 KCC100030 KCC100080 VUB15.57 18.91 20.10 9.68 20.10 9.68 28.29 31.40 31.40 48.96 5.70 3.17 3.17 7.08 209.45 24.84 31.40 31.40 48.96 5.70 3.17 3.17 6.43 39.84 60.73 57.75 239.37 27.66 227.9 193.88 42.91 98.43 13.82 23.93 52.88 0.50 0.50 0.50 0.50 18.29 44.54 57.32 57.32 55.57 Meets UK Legislation Only Dealer fit only. MGTF ONLY Dealer fit only. MGTF ONLY Dealer fit only. MGTF ONLY up to vin 620549 Dealer fit only. MGTF ONLY Dealer fit only. MGTF ONLY up to vin 620549 Dealer fit only. MGTF ONLY up to vin 620549 Dealer fit only. MGTF ONLY up to vin 620549 MGF 2000 MY on cars only. Paintable. Fully fitted price does not include painting MGF ONLY Dealer fit only. MGTF ONLY Dealer fit only. MGTF ONLY Dealer fit only. MGTF ONLY from vin 620549 on Dealer fit only. MGTF ONLY Dealer fit only. MGTF ONLY from vin 620549 on Dealer fit only. MGTF ONLY from vin 620549 on Dealer fit only. MGTF ONLY from vin 620549 on MGF ONLY MGF ONLY MGF ONLY The roll hoop trim kit must be ordered for fitment. The roll hoop trim kit must be ordered for fitment. To be order with the roll hoops. For tyre size 205/50 x 15". Fit rear wheels only. A legal requirement in some countries A legal requirement in some countries. All fixings included in kit MGF ONLY Extra bulbs required in kit - see supplimentary matrix

209.60

301.92 29.19

199.68

0.75 1.00 2.50 2.50 as above
46.81 104.85 67.86 325.91 32.50 429.83 389.85 50.42 115.66 16.24 28.12 97.85
Ash Tray - Chrome Ash Tray - White Silver Bright Trim - Chrome Set Centre Console Surround - White Silver Cigar Lighter - Chrome Door Garnish Rail - White Silver (RH) Door Garnish Rail - White Silver (LH) Gear Knob - White Silver Alloy Gear Knob - Alloy Gear Knob - Leather/Alloy Gear Knob - Wood/Alloy Grill Set - Bright Handbrake Button - Chrome Handbrake Grip - White Silver Alloy Handbrake Grip - Wood Spoiler - Rear (Painted) Spoiler - Rear (Painted) Spoiler - Rear (Painted) Spoiler - Rear (Painted) Spoiler - Rear (Painted) Spoiler - Rear (Painted) Spoiler - Rear (Painted) Spoiler - Rear (Primed) Spoiler - Rear (Primed) Sports Lights Rear - Chrome Sports Lights Rear - Black Steering Wheel - White Silver Steering Wheel - White Silver (Tiptronic) Steering Wheel - Leather (Black) - MG Badged Steering Wheel - Wood - MG Badged FKH100230 FKH100160MWK VUB105690 FHD102460MWK YUJ100770MMM EJH000060MWK EJH000070MWK UKJ000170MWJ UKJ100960MDC UKJ100550 VUO100050 VUB105300 SNJ100090MMM SNE000070MWJ VUB105580 DFD101570LML DFD101570CMV DFD101570COF DFD101570HFF DFD101570HYF DFD101570LML DFD101570MNX DFD101570LML DFD106710LML XPT00152ACA XPT000152ACB QTB102731MWK QTB001330MBG QTB101020PMA VTH1 56.74 33.50 128.05 59.71 59.09 52.91 52.91 32.29 37.49 46.87 44.75 108.13 16.90 31.10 47.37 279.04 279.04 279.04 279.04 279.04 279.04 279.04 213.43 213.43 144.67 144.67 267.50 346.56 116.39 223.68 0.50 0.50 0.50 66.67 39.36 150.46 92.48 69.43 168.99 37.94 44.05 55.07 52.58 171.70 19.86 36.54 55.70 350.20 350.20 350.20 350.20 350.20 350.20 350.20 273.11 273.11 169.99 169.99 336.64 429.53 136.76 285.15 Set includes cigar lighter, handbrake button and ashtray Dealer fit only Dealer fit only Dealer fit only
Set includes 2 x side vents and 2 x front bumper grille. MGF ONLY Dealer fit only Also part of Wood Collection Includes installation kit. Includes installation kit. Includes installation kit. Includes installation kit. Includes installation kit. Includes installation kit. Includes installation kit. Requires painting. Fully fitted price does not include painting. MGF ONLY Requires painting. Fully fitted price does not include painting. MGF ONLY
0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50

0.50 0.50 0.50

Dealer fit only due to airbag fitment Dealer fit only due to airbag fitment Dealer fit only due to airbag fitment MGF ONLY Dealer fit only due to airbag fitment