Radio / CD

Honolulu CD50

Operating instructions

PORTUGUS ESPAOL FRANAIS ENGLISH

OPERATING ELEMENTS

9 : ; < = button to unlock release panel Volume control ON button, switches the unit on/off, mute FM button, selects the FM memory bank AM button, selects the AM waveband Display button, displays the time DIS, changes display contents MENU button, accesses the menu for basic settings button, opens the flip release panel Cursor button block OK button, confirms menu selections and starts the SCAN function EQ button, adjusts the BASS CENTER frequency AUD button, adjusts bass, treble, balance and fader LD, switches the Loudness function on/off 1 to 6 station buttons TS button, starts the Travelstore function CDC button, switches sound source between radio, CD and CD changer (if connected)

> ? @

CONTENTS
Traffic safety. 6 Installation.. 6 Accessories. 6 Guarantee.. 6 International telephone information. 6
ENGLISH PORTUGUS ESPAOL FRANAIS

Important information. 6

Removable front panel. 7
Theft protection system. 7 Removing the operating panel.. 7 Replacing the operating panel. 7
Playing tracks in random order (MIX).. 13 Scanning tracks (SCAN).. 13 Repeating individual tracks (REPEAT).. 14 Interrupting playback (PAUSE). 14 Switching the display mode. 14

CD changer operation. 14

Starting CD changer operation. 14 Selecting CDs. 14 Selecting tracks.. 14 Audible fast forward/reverse (CUE/REVIEW).. 14 Switching the display mode. 14 Repeating individual tracks or entire CDs (REPEAT).. 15 Playing tracks in random order (MIX).. 15 Scanning all of the tracks on all of the CDs (SCAN).. 15 Interrupting playback (PAUSE). 15
Switching the car audio system on/off.. 8 Volume control.. 9
Adjusting the power-on volume. 9 Mute.. 9 Mute during telephone operation.. 9 Adjusting the volume of the beep. 10

Radio operation.. 10

Switching to the radio mode.. 10 Selecting wavebands/memory banks.. 10 Tuning into radio stations.. 10 Adjusting seek tuning sensitivity.. 11 Storing radio stations. 11 Storing radio stations automatically (Travelstore).. 11 Recalling stored radio stations. 11 Scanning the radio stations within reception range (SCAN). 11 Adjusting the scan time.. 12 Tuner configuration. 12
Clock.. 16 Adjusting the tone and balance/fader. 17 Switching Loudness on/off. 17 BASS CENTER frequency adjustment.. 18
Adjusting the spectrometer. 18
External audio sources.. 19
Switching the AUX output on/off. 19

CD player operation.. 13

Starting CD player operation. 13 Selecting tracks.. 13 Audible fast forward/reverse (CUE/REVIEW).. 13
Specifications. 19 Installation instructions.. 71

IMPORTANT INFORMATION

Important information
Before you use your car audio system for the first time, please take the time to read the instruction manual carefully and make yourself familiar with the audio equipment. Keep this manual handy in your car for future reference. Amplifiers All Blaupunkt amplifiers can be used. CD changers The following CD changers can be connected directly: CDC A 06, CDC A 08, CDC A 072 and IDC A 09. The CDC A 05 and CDC A 071 can be connected with an adapter cable (Blaupunkt no. 889 093).

Traffic safety

Traffic safety is always the top priority. Do not attempt to operate your car audio system unless the traffic conditions permit. Familiarize yourself with the equipment before you start driving. Always make sure that you are still able to hear any warning signals coming from outside the vehicle, such as police or fire engine sirens, at all times. As a result, please always select a moderate volume for playing your car audio system while you are driving.

Guarantee

The scope of the guarantee is determined by the laws in the country where the unit is purchased. Regardless of the legal guarantee regulations, Blaupunkt affords a 12-month guarantee. If you have any questions about the guarantee, please contact your authorised Blaupunkt dealer. Your cash register receipt is a valid guarantee coupon.

Installation

If you would like to install your new car stereo yourself or add other audio components to the existing ones, then please read the instructions on installation and connection at the end of this manual carefully.
International telephone information
Have you got any questions on the operation of this equipment or do you require more information? Give us a call! You will find the international telephone and fax numbers on the last page of this manual.

Accessories

Use only Blaupunkt-approved accessories. Remote control unit The optionally available RC 08 infrared remote control unit allows you to conveniently operate the most important system functions from the steering wheel. 6

REMOVABLE FRONT PANEL

Theft protection system
To prevent your car audio system from being stolen, it has been equipped with a removable front panel (flip release panel). Without the front panel, the car audio system is useless to thieves. Protect your car audio system against theft and take the operating panel with you each time you leave the vehicle. Never leave the release panel in the car, even if it is well hidden. The panel has been designed so that it is easy to remove. Notes: q Do not drop the release panel. q Do not expose the release panel to direct sunlight or other heat sources. q Store the release panel in the case supplied.
guides from left to right.
Press the left-hand side of the panel onto the car audio system until it locks into place.
Removing the operating panel Press 1.
The release panel will unlock.
Note: q While replacing the panel, be careful not to press on the display. If the car audio system was on when you removed the panel, it will automatically switch back on using the same settings when you replace it (radio, CD player or CD changer).
First pull the operating panel forward and then slide it to the left to remove it.

PORTUGUS

ESPAOL
Replacing the operating panel Slide the operating panel into the

FRANAIS

ENGLISH

Removable front panel

When you remove the operating panel, the car audio system will automatically switch off. All of the settings will remain stored. A CD inserted into the car audio system will remain in place.

SWITCHING ON/OFF

Switching the car audio system on/off
The car audio system can be switched on/off in a number of ways. Switching the car audio system on/ off with the ignition If the car audio system has been connected to your vehicle ignition, it is possible to switch it on and off with the ignition. You can also switch the car audio system on when the ignition is switched off. Switching the car audio system on by inserting a CD If the system is switched off and there is no CD in the CD player,

press

The flip release panel will open.
Insert the CD into the CD player
with the label facing upwards until you feel resistance. Do not use force. The CD will be pulled automatically into the CD player. Do not attempt to assist or prevent this process.
Press down and hold 3 until the
car audio system switches on. Note: To prevent the car battery from running down, the radio will switch off again automatically after one hour. Switching the car audio system on/ off with the removable front panel
Press the operating panel closed
gently until you feel it click into place. The audio system will switch on. CD playback will begin.
Remove the release panel. The car audio system will switch off. Replace the release panel.
The car audio system will switch on again. The last settings used (radio, CD player or CD changer) will be activated. Switching the car audio system on/ off by pressing 3
Press 3 to switch the car audio

system on.

Press 3 for longer than 2 seconds
to switch the car audio system off again. The system will then switch off. 8

VOLUME CONTROL

The car audio system volume can be adjusted to levels from 0 (off) to 66 (maximum). You can reduce the volume of the car audio system immediately (mute).

Volume control

Press 3 briefly.
MUTE will appear in the display. Selecting the mute level It is possible to select the mute level.
To increase the volume, turn the
volume control knob 2 to the right.
To decrease the volume, turn the
volume control knob 2 to the left.
Adjusting the power-on volume
It is possible to adjust the volume at which the car audio system switches on.
Press MENU 8. Press : repeatedly until

MUTE LEVEL appears in the display.
Press MENU 8. Press : repeatedly until ON
VOLUME appears in the display.

Press

level.

: to select the mute

Once you have made your selection, press MENU 8 or OK ;.

: to adjust the vol-

ume. If you adjust this setting to 0, the car audio system will switch on at the volume used before it was switched off. Warning of serious injury If the power-on volume is set to the maximum level, it may be extremely loud when the car audio system is switched on. If the power-on volume is set to 0 and the car audio system was played at maximum volume before it was switched off, it may be extremely loud when the car audio system is switched back on. This could result in serious injury to your ears!
Mute during telephone operation
If your car audio system has been equipped with a mobile telephone, it will automatically switch to mute when you use the phone. This will not work unless the mobile phone is connected to the car audio system as described in the installation instructions. The car audio system will be muted to the mute level selected.
Once you have selected the desired settings, press MENU 8 or OK ;. 9
Adjusting the volume of the beep
For a number of functions you will hear a beep if you press a key for longer than 2 seconds, e.g. if you want to store a radio station on a station preset. You can adjust the volume level of this beep.

RADIO OPERATION

Radio operation
Switching to the radio mode
If you are currently using the CD player or CD changer,
press CDC @ repeatedly until
RADIO appears in the display.
BEEP appears in the display.
Selecting wavebands/memory banks
Using this car audio system, you can tune into radio stations on the FM and AM wavebands. There are three memory banks for the FM waveband and one memory bank for AM. You can store six stations in each of these memory banks.
: to adjust the volume. 0 means the beep volume is off, 9 means the beep volume is adjusted to the maximum volume.
Once you have adjusted the settings, press MENU 8 or OK ;.
To switch between the different FM
memory banks , press FM 4.
To select the AM waveband, press
Tuning into radio stations
You can tune into radio stations in a number of different ways. Automatic seek tuning
The radio will tune into the next available station within reception range. Manual station selection You can also tune into radio stations manually.
It is also possible to adjust the sensitivity of the seek tuning function to tune the radio into stations with strong reception signals only, or to those with weaker reception signals as well.
Adjusting seek tuning sensitivity

Storing radio stations automatically (Travelstore)
You can automatically store the six radio stations with the strongest reception in your current reception area. These stations will be stored in the FMT or AM memory bank depending on the selected waveband. Note: Any stations stored previously in the memory bank will be deleted.
SENS appears in the display.
Press :. The currently selected setting will appear in the display. SENS HI indicates the highest level of sensitivity, SENS LO the lowest. If you select SENS LO, lo will light up in the display. Press
sensitivity. : to adjust the desired
Press TS ? briefly. The storing process will begin. TRAVEL-STORE will appear in the display. After the stations have been stored, the radio will automatically begin to play the station stored on preset button 1 of the respective memory bank. Recalling stored radio stations Select the desired station memory

Storing radio stations

Storing radio stations manually
Press the station button 1 to 6 >
on which you have stored the desired radio station.
Select the desired memory bank
FM1, FM2 or FMT or the waveband AM.
Tune the radio into the desired station.
Scanning the radio stations within reception range (SCAN)
You can scan all of the radio stations currently within your reception range. The scan time can be set in the menu to play from five to 30 seconds. Starting SCAN
Press and hold down one of the
station preset buttons 1 to 6 > on which you want to store the radio station for longer than two seconds.
Press and hold down OK ; for

longer than two seconds.

SCAN will begin. SCAN will appear briefly in the display, followed by the flashing frequency of the radio station currently being scanned. Stopping the SCAN function, continuing to listen to the radio station scanned Configuring the tuner
Press MENU 8. Press : repeatedly until FM
TUNER appears in the display.

region.

: to set the country/

Press OK ;.

SCAN will end and the last station scanned will continue playing.
Adjusting the scan time Press MENU 8. Press : repeatedly until
SCANTIME appears in the display.

as desired.

: to set the scan time
Once you have made your selection, press MENU 8 or OK ;. Note: The scan time selected also applies to the SCAN function for CD player and CD changer operation.

Tuner configuration

This unit is equipped with a multiband tuner. This means that the tuner can be configured to suit requirements that are specific to various countries. The countries/regions available are: USA, Europe, Asia and Thailand. The tuner will only function optimally if it is configured for the country/region in which the unit is being operated.

CD PLAYER OPERATION

The CD player in this car audio system can be used to play conventional music CDs with a diameter of 12 cm. Danger of damage to the CD player! CD singles with a diameter of 8 cm and contour CDs (shape CDs) are not suitable for use with this CD player. We assume no liability for any damage done to the CD player resulting from the use of unsuitable CDs.

CD player operation

Selecting tracks Press a key on the cursor block :
to select the next or the previous track. Press or : once to restart the same track.
Audible fast forward/reverse (CUE/REVIEW)

To start Cue or Review,

press and hold down either
: until the process begins.
Starting CD player operation
If there is no CD in the player,
9. The flip release panel will open.
Playing tracks in random order (MIX) Press 5 MIX >.
MIX CD will appear briefly in the display, the MIX symbol will light up in the display. The next track played will be selected at random. Stopping the MIX function
Insert a CD into the player with the
label facing up until you feel resistance. Do not use force. The CD will be pulled into the player automatically. Do not attempt to assist or prevent this process.

Press 5 MIX > again.

MIX OFF will appear briefly in the display and the MIX symbol will no longer light up.
gently until you feel it click into place. CD playback will begin. q If there already is a CD inserted into the player,

Scanning tracks (SCAN)

You can scan all of the tracks on the CD.
Press OK ; for longer than two
seconds. Scanning will begin with the next track. Note: It is possible to adjust the scan time. For more information, read the section on Adjusting the scan time in the chapter on Radio Operation. 13

CD appears in the display. Playback will resume at the point where it was interrupted.
Stopping the SCAN function, continue listening to the current track

CD CHANGER OPERATION

CD changer operation
Note: For information on how to handle CDs, how to insert CDs into the changer and how to operate the changer, please refer to the instructions included with the CD changer.
To stop the SCAN function, press
OK ;. The track currently scanned will continue playing.
Repeating individual tracks (REPEAT) To repeat the track currently playing, press 4 RPT >. REPEAT TRCK will appear briefly in the display, the RPT symbol will light up in the display. The track will continue to repeat until RPT is deactivated. Stopping the REPEAT function
Starting CD changer operation Press CDC @ repeatedly until
CHANGER appears in the display. Playback will begin with the first CD the changer detects in the magazine.
Selecting CDs To select a CD up or down in the
magazine, press or : the required number of times.
If you want to stop the REPEAT
function, press 4 RPT > again. REPEAT OFF will appear briefly in the display and the RPT symbol will no longer light up. CD playback will resume normally.
Selecting tracks To select a different track on the
CD currently playing, press or : the required number of times.
Interrupting playback (PAUSE) Press 3 >.
PAUSE will appear in the display. Stopping PAUSE

Press 3

> during the pause.

Playback will resume.

Switching the display mode To switch the display between the
track number and time or the track number and elapsed playing time, press / DIS 7 for longer than two seconds once or repeatedly as required. 14
track number and time or the track number and elapsed playing time or the CD number and track / DIS 7 for longnumber, press er than two seconds once or repeatedly as required.
To stop the MIX function, press 5
MIX > repeatedly until MIX OFF appears briefly in the display and MIX no longer lights up.
Repeating individual tracks or entire CDs (REPEAT) To repeat the track currently playing, press 4 RPT > briefly. REPEAT TRCK will appear briefly in the display, RPT will light up in the display.

Stopping the MIX function
To repeat the entire CD currently
playing, press 4 RPT > again. REPEAT DISC will appear briefly in the display, RPT will light up in the display. Stopping the REPEAT function
Scanning all of the tracks on all of the CDs (SCAN) To scan all of the tracks on all of
the CDs in ascending order, press OK ; for longer than two seconds. SCAN will appear in the display. Stopping the SCAN function
To stop the REPEAT function for
the current track or CD, press 4 RPT > repeatedly until REPEAT OFF appears in the display and RPT no longer lights up.
OK ; briefly. The track currently scanned will continue playing. Note: It is possible to adjust the scan time. For more information, read the section on Adjusting the scan time in the chapter on Radio Operation.
Playing tracks in random order (MIX) To play the tracks of the currently
selected CD in random order, press 5 MIX > briefly. MIX CD will appear briefly in the display, MIX will light up in the display.
To play the tracks of all of the CDs
in random order, press 5 MIX > again. MIX ALL will appear briefly in the display, MIX will light up in the display. Note: The CDC A 08 and the IDC A 09 are also able to play all of the CDs in the changer in random order. The other CD changers first play all of the tracks on a CD in random order and then select the next CD in the changer.
PAUSE will appear in the display. Stopping PAUSE > during the pause. Playback will resume.
Displaying the clock briefly To display the time briefly, press

/ DIS 7 briefly.

Activating the clock for display when the car audio system is switched off To activate the clock for display
when the car audio system is switched off, press MENU 8. MENU will appear in the display.
Setting the time To set the time, press MENU 8.
MENU will appear in the display.

Press Press

: until CLOCKSET appears in the display.
: repeatedly until CLK DISP OFF or CLK DISP ON appears in the display. or : to switch the clock display on or off. press MENU 8 or OK ;.
:. The time will appear in the display. The minutes will flash and can be altered.
Once you have made the setting, Displaying the time briefly when the car radio is switched off
To display the time briefly when the car radio is switched off,

: to alter the min-

Once you have altered the minutes, press :. The hours will begin to flash.

hours.

: to alter the

/ DIS 7.

Once you have set the time, press

MENU 8 or OK ; twice.

The time will then appear in the display for eight seconds.
Selecting the 12/24-hour time display mode Press MENU 8.
: repeatedly until 24 H MODE or 12 H MODE appears in the display. : to switch the dis-

or play mode.

Once you have selected the mode,

press MENU 8 or OK ;. 16

TONE AND BALANCE/FADER
Loudness boosts the bass and treble when the volume is low to create a more natural sound.
Adjusting the tone and balance/fader
Adjusting the bass To adjust the bass, press AUD /
LD =. BASS will appear in the display.
Switching Loudness on/off
Press AUD / LD = for approx. two
seconds. LD will light up in the display to indicate that Loudness is active.

: to alter the bass.

Adjusting the treble To adjust the treble, press AUD /
Adjusting Loudness intensity
The Loudness boost can be set in stages from one to six.

Press MENU 8.

: until TREBLE appears in the display. or : to alter the treble.
Adjusting the balance To adjust the balance, press AUD /
: repeatedly until LOUDNESS appears in the display. or : to alter the Loudness setting. ing the settings, press MENU 8 or OK ;.
Once you have completed adjust-
: until BALANCE appears in the display. or : to alter the bal-
Adjusting the fader To adjust the fader, press AUD /
: until FADER appears in the display. or : to alter the fader.

BASS CENTER

BASS CENTER frequency adjustment
The bass center frequency adjustment allows you to adjust the bass mid-frequency to suit the sound system in your automobile (50 Hz or 100 Hz).
Adjusting the spectrometer
The spectrometer in the display uses symbols to temporarily indicate what adjustments are made to the volume, the tone and balance/fader and the equalizer settings. If no adjustments are being made to the system, the spectrometer displays the output level of the car radio. You can select the type of spectrometer you want displayed in the menu. There are two different types available. Selecting the spectrometer type
To set the bass mid-frequency,
press EQ <. BASS CENTER will appear in the display.
or : to switch between 50 Hz and 100 Hz. ing the settings, press EQ < or OK ;.
: repeatedly until EQ DISPLAY appears in the display. or : to select either SPECTRUM 1, SPECTRUM 2 or EQ DISP OFF. ing the settings, press MENU 8 or OK ;.

EXTERNAL AUDIO SOURCES

External audio sources
In place of the CD changer it is also possible to connect other external audio sources to the line output. These sources can include a portable CD player, MiniDisc player or MP3 player. You must activate the AUX output in the menu. If you would like to connect another external audio source, you will require an adapter cable. This adapter cable can be ordered from any authorized Blaupunkt dealer.

SPECIFICATIONS

Amplifier
Output power: 4 x 25 watts sinus acc. to DIN at 14.4 V 4 x 40 watts max. power

Specifications

Wavebands: FM : AM : 87.5 107.9 MHz kHz
Switching the AUX output on/off Press MENU 8.
FM frequency response: 30 - 15000 Hz
: repeatedly until AUXIN-1 OFF or AUX-IN-1 ON appears in the display. or : to switch AUX on
Frequency response: 20 - 20000 Hz

or off.

Once you have completed your selections, press MENU 8 or OK ;. Note: If the AUX input has been switched ON, you can select it by pressing CDC @.

Preamp Out

4 channels: 4V
Subject to technical modification! 19
Service numbers / Numros du service aprs-vente / Nmeros de servicio / Nmero de servio
Tel.: Deutschland Belgique / Belgi France Nederland Great Britain Danmark Sverige Norge Suomi sterreich 01-39-800-212 Fax: 36 01-39-708-229
esk republika USA Singapore Slovensko

Blaupunkt-Werke GmbH

Bosch Gruppe

02/00 TRO K7/VKD 402 211

Installation instructions Notice de montage Instrucciones de instalacin Instrues de montagem

Safety instructions

When carrying out installation work and making connections please observe the following safety instructions: - Disconnect the negative terminal of the battery! When doing so, please observe the vehicle manufacturers safety instructions. - Make sure you do not damage vehicle components when drilling any holes. - The cross sections of the positive and negative cables must not be less than 1.5 mm2. - Incorrect installation may cause interference with electronic vehicle systems or your car radio. - Do not connect the vehicles plug connectors to the radio! - You can obtain the adapter cable required for your vehicle type from any BLAUPUNKT dealer.

Radio / CD

Honolulu CD50

Operating instructions

Open here Ouvrir s.v.p. Por favor, abrir Favor abrir 2
PORTUGUS ESPAOL FRANAIS ENGLISH

OPERATING ELEMENTS

9 : ; < = button to unlock release panel Volume control ON button, switches the unit on/off, mute FM button, selects the FM memory bank AM button, selects the AM waveband Display button, displays the time DIS, changes display contents MENU button, accesses the menu for basic settings button, opens the flip release panel Cursor button block OK button, confirms menu selections and starts the SCAN function EQ button, adjusts the BASS CENTER frequency AUD button, adjusts bass, treble, balance and fader LD, switches the Loudness function on/off 1 to 6 station buttons TS button, starts the Travelstore function CDC button, switches sound source between radio, CD and CD changer (if connected)

> ? @

CONTENTS
Traffic safety. 6 Installation.. 6 Accessories. 6 Guarantee.. 6 International telephone information. 6
ENGLISH PORTUGUS ESPAOL FRANAIS

Important information. 6

Removable front panel. 7
Theft protection system. 7 Removing the operating panel.. 7 Replacing the operating panel. 7
Playing tracks in random order (MIX).. 13 Scanning tracks (SCAN).. 13 Repeating individual tracks (REPEAT).. 14 Interrupting playback (PAUSE). 14 Switching the display mode. 14

CD changer operation. 14

Starting CD changer operation. 14 Selecting CDs. 14 Selecting tracks.. 14 Audible fast forward/reverse (CUE/REVIEW).. 14 Switching the display mode. 14 Repeating individual tracks or entire CDs (REPEAT).. 15 Playing tracks in random order (MIX).. 15 Scanning all of the tracks on all of the CDs (SCAN).. 15 Interrupting playback (PAUSE). 15
Switching the car audio system on/off.. 8 Volume control.. 9
Adjusting the power-on volume. 9 Mute.. 9 Mute during telephone operation.. 9 Adjusting the volume of the beep. 10

Radio operation.. 10

Switching to the radio mode.. 10 Selecting wavebands/memory banks.. 10 Tuning into radio stations.. 10 Adjusting seek tuning sensitivity.. 11 Storing radio stations. 11 Storing radio stations automatically (Travelstore).. 11 Recalling stored radio stations. 11 Scanning the radio stations within reception range (SCAN). 11 Adjusting the scan time.. 12 Tuner configuration. 12
Clock.. 16 Adjusting the tone and balance/fader. 17 Switching Loudness on/off. 17 BASS CENTER frequency adjustment.. 18
Adjusting the spectrometer. 18
External audio sources.. 19
Switching the AUX output on/off. 19

CD player operation.. 13

Starting CD player operation. 13 Selecting tracks.. 13 Audible fast forward/reverse (CUE/REVIEW).. 13
Specifications. 19 Installation instructions.. 71

IMPORTANT INFORMATION

Important information
Before you use your car audio system for the first time, please take the time to read the instruction manual carefully and make yourself familiar with the audio equipment. Keep this manual handy in your car for future reference. Amplifiers All Blaupunkt amplifiers can be used. CD changers The following CD changers can be connected directly: CDC A 06, CDC A 08, CDC A 072 and IDC A 09. The CDC A 05 and CDC A 071 can be connected with an adapter cable (Blaupunkt no. 889 093).

Traffic safety

Traffic safety is always the top priority. Do not attempt to operate your car audio system unless the traffic conditions permit. Familiarize yourself with the equipment before you start driving. Always make sure that you are still able to hear any warning signals coming from outside the vehicle, such as police or fire engine sirens, at all times. As a result, please always select a moderate volume for playing your car audio system while you are driving.

Guarantee

The scope of the guarantee is determined by the laws in the country where the unit is purchased. Regardless of the legal guarantee regulations, Blaupunkt affords a 12-month guarantee. If you have any questions about the guarantee, please contact your authorised Blaupunkt dealer. Your cash register receipt is a valid guarantee coupon.

Installation

If you would like to install your new car stereo yourself or add other audio components to the existing ones, then please read the instructions on installation and connection at the end of this manual carefully.
International telephone information
Have you got any questions on the operation of this equipment or do you require more information? Give us a call! You will find the international telephone and fax numbers on the last page of this manual.

Accessories

Use only Blaupunkt-approved accessories. Remote control unit The optionally available RC 08 infrared remote control unit allows you to conveniently operate the most important system functions from the steering wheel. 6

REMOVABLE FRONT PANEL

Theft protection system
To prevent your car audio system from being stolen, it has been equipped with a removable front panel (flip release panel). Without the front panel, the car audio system is useless to thieves. Protect your car audio system against theft and take the operating panel with you each time you leave the vehicle. Never leave the release panel in the car, even if it is well hidden. The panel has been designed so that it is easy to remove. Notes: Do not drop the release panel. Do not expose the release panel to direct sunlight or other heat sources. Store the release panel in the case supplied.
guides from left to right.
Press the left-hand side of the panel onto the car audio system until it locks into place.
Removing the operating panel Press 1.
The release panel will unlock.
Note: While replacing the panel, be careful not to press on the display. If the car audio system was on when you removed the panel, it will automatically switch back on using the same settings when you replace it (radio, CD player or CD changer).
First pull the operating panel forward and then slide it to the left to remove it.

PORTUGUS

ESPAOL
Replacing the operating panel Slide the operating panel into the

FRANAIS

ENGLISH

Removable front panel

When you remove the operating panel, the car audio system will automatically switch off. All of the settings will remain stored. A CD inserted into the car audio system will remain in place.

SWITCHING ON/OFF

Switching the car audio system on/off
The car audio system can be switched on/off in a number of ways. Switching the car audio system on/ off with the ignition If the car audio system has been connected to your vehicle ignition, it is possible to switch it on and off with the ignition. You can also switch the car audio system on when the ignition is switched off. Switching the car audio system on by inserting a CD If the system is switched off and there is no CD in the CD player,

press

The flip release panel will open.
Insert the CD into the CD player

with the label facing upwards until you feel resistance. Do not use force. The CD will be pulled automatically into the CD player. Do not attempt to assist or prevent this process.
Press down and hold 3 until the
car audio system switches on. Note: To prevent the car battery from running down, the radio will switch off again automatically after one hour. Switching the car audio system on/ off with the removable front panel
Press the operating panel closed
gently until you feel it click into place. The audio system will switch on. CD playback will begin.
Remove the release panel.
The car audio system will switch off.
Replace the release panel.
The car audio system will switch on again. The last settings used (radio, CD player or CD changer) will be activated. Switching the car audio system on/ off by pressing 3
Press 3 to switch the car audio

system on.

Press 3 for longer than 2 seconds
to switch the car audio system off again. The system will then switch off. 8

VOLUME CONTROL

The car audio system volume can be adjusted to levels from 0 (off) to 66 (maximum). You can reduce the volume of the car audio system immediately (mute).

Volume control

Press 3 briefly.
MUTE will appear in the display. Selecting the mute level It is possible to select the mute level.
To increase the volume, turn the
volume control knob 2 to the right.
To decrease the volume, turn the
volume control knob 2 to the left.
Adjusting the power-on volume
It is possible to adjust the volume at which the car audio system switches on.
Press MENU 8. Press : repeatedly until
MUTE LEVEL appears in the display.
Press MENU 8. Press : repeatedly until ON
VOLUME appears in the display.

Press

level.

: to select the mute

Once you have made your selection, press MENU 8 or OK ;.

: to adjust the vol-

ume. If you adjust this setting to 0, the car audio system will switch on at the volume used before it was switched off. Warning of serious injury If the power-on volume is set to the maximum level, it may be extremely loud when the car audio system is switched on. If the power-on volume is set to 0 and the car audio system was played at maximum volume before it was switched off, it may be extremely loud when the car audio system is switched back on. This could result in serious injury to your ears!

Mute during telephone operation
If your car audio system has been equipped with a mobile telephone, it will automatically switch to mute when you use the phone. This will not work unless the mobile phone is connected to the car audio system as described in the installation instructions. The car audio system will be muted to the mute level selected.
Once you have selected the desired settings, press MENU 8 or OK ;. 9
Adjusting the volume of the beep
For a number of functions you will hear a beep if you press a key for longer than 2 seconds, e.g. if you want to store a radio station on a station preset. You can adjust the volume level of this beep.

RADIO OPERATION

Radio operation
Switching to the radio mode
If you are currently using the CD player or CD changer,
press CDC @ repeatedly until
RADIO appears in the display.
BEEP appears in the display.
Selecting wavebands/memory banks
Using this car audio system, you can tune into radio stations on the FM and AM wavebands. There are three memory banks for the FM waveband and one memory bank for AM. You can store six stations in each of these memory banks.
: to adjust the volume. 0 means the beep volume is off, 9 means the beep volume is adjusted to the maximum volume.
Once you have adjusted the settings, press MENU 8 or OK ;.
To switch between the different FM
memory banks , press FM 4.
To select the AM waveband, press
Tuning into radio stations
You can tune into radio stations in a number of different ways. Automatic seek tuning
The radio will tune into the next available station within reception range. Manual station selection You can also tune into radio stations manually.
It is also possible to adjust the sensitivity of the seek tuning function to tune the radio into stations with strong reception signals only, or to those with weaker reception signals as well.
Adjusting seek tuning sensitivity
Storing radio stations automatically (Travelstore)
You can automatically store the six radio stations with the strongest reception in your current reception area. These stations will be stored in the FMT or AM memory bank depending on the selected waveband. Note: Any stations stored previously in the memory bank will be deleted.

SENS appears in the display.
The currently selected setting will appear in the display. SENS HI indicates the highest level of sensitivity, SENS LO the lowest. If you select SENS LO, lo will light up in the display.

Press TS ? briefly.

The storing process will begin. TRAVEL-STORE will appear in the display. After the stations have been stored, the radio will automatically begin to play the station stored on preset button 1 of the respective memory bank.

sensitivity.

: to adjust the desired

Storing radio stations

Storing radio stations manually
Recalling stored radio stations Select the desired station memory
Press the station button 1 to 6 >
on which you have stored the desired radio station.
Select the desired memory bank
FM1, FM2 or FMT or the waveband AM.
Tune the radio into the desired station.
Scanning the radio stations within reception range (SCAN)
You can scan all of the radio stations currently within your reception range. The scan time can be set in the menu to play from five to 30 seconds. Starting SCAN
Press and hold down one of the
station preset buttons 1 to 6 > on which you want to store the radio station for longer than two seconds.
Press and hold down OK ; for

longer than two seconds.

SCAN will begin. SCAN will appear briefly in the display, followed by the flashing frequency of the radio station currently being scanned. Stopping the SCAN function, continuing to listen to the radio station scanned Configuring the tuner
Press MENU 8. Press : repeatedly until FM
TUNER appears in the display.

region.

: to set the country/

Press OK ;.

SCAN will end and the last station scanned will continue playing.
Adjusting the scan time Press MENU 8. Press : repeatedly until
SCANTIME appears in the display. : to set the scan time

as desired.

Once you have made your selection, press MENU 8 or OK ;. Note: The scan time selected also applies to the SCAN function for CD player and CD changer operation.

Tuner configuration

This unit is equipped with a multiband tuner. This means that the tuner can be configured to suit requirements that are specific to various countries. The countries/regions available are: USA, Europe, Asia and Thailand. The tuner will only function optimally if it is configured for the country/region in which the unit is being operated.

CD PLAYER OPERATION

The CD player in this car audio system can be used to play conventional music CDs with a diameter of 12 cm. Danger of damage to the CD player! CD singles with a diameter of 8 cm and contour CDs (shape CDs) are not suitable for use with this CD player. We assume no liability for any damage done to the CD player resulting from the use of unsuitable CDs.

CD player operation

Selecting tracks Press a key on the cursor block :
to select the next or the previous track. or : once to restart the Press same track.
Audible fast forward/reverse (CUE/REVIEW)

To start Cue or Review,

press and hold down either
: until the process begins.
Starting CD player operation
If there is no CD in the player, 9.
Playing tracks in random order (MIX) Press 5 MIX >.
MIX CD will appear briefly in the display, the MIX symbol will light up in the display. The next track played will be selected at random. Stopping the MIX function
Insert a CD into the player with the
label facing up until you feel resistance. Do not use force. The CD will be pulled into the player automatically. Do not attempt to assist or prevent this process.

Press 5 MIX > again.

MIX OFF will appear briefly in the display and the MIX symbol will no longer light up.
gently until you feel it click into place. CD playback will begin. If there already is a CD inserted into the player,

Scanning tracks (SCAN)

You can scan all of the tracks on the CD.
Press OK ; for longer than two
seconds. Scanning will begin with the next track. Note: It is possible to adjust the scan time. For more information, read the section on Adjusting the scan time in the chapter on Radio Operation. 13
CD appears in the display. Playback will resume at the point where it was interrupted.
Stopping the SCAN function, continue listening to the current track

CD CHANGER OPERATION

CD changer operation
Note: For information on how to handle CDs, how to insert CDs into the changer and how to operate the changer, please refer to the instructions included with the CD changer.
To stop the SCAN function, press
OK ;. The track currently scanned will continue playing.
Repeating individual tracks (REPEAT) To repeat the track currently playing, press 4 RPT >. REPEAT TRCK will appear briefly in the display, the RPT symbol will light up in the display. The track will continue to repeat until RPT is deactivated. Stopping the REPEAT function
Starting CD changer operation Press CDC @ repeatedly until
CHANGER appears in the display. Playback will begin with the first CD the changer detects in the magazine.
Selecting CDs To select a CD up or down in the
magazine, press or : the required number of times.
If you want to stop the REPEAT
function, press 4 RPT > again. REPEAT OFF will appear briefly in the display and the RPT symbol will no longer light up. CD playback will resume normally.
Selecting tracks To select a different track on the
CD currently playing, press or : the required number of times.
Interrupting playback (PAUSE) Press 3 >.

PAUSE will appear in the display. Stopping PAUSE

Press 3

> during the pause.

Playback will resume.

Switching the display mode To switch the display between the
track number and time or the track number and elapsed playing time, / DIS 7 for longer than press two seconds once or repeatedly as required. 14
track number and time or the track number and elapsed playing time or the CD number and track / DIS 7 for longnumber, press er than two seconds once or repeatedly as required.
To stop the MIX function, press 5
MIX > repeatedly until MIX OFF appears briefly in the display and MIX no longer lights up.
Repeating individual tracks or entire CDs (REPEAT) To repeat the track currently playing, press 4 RPT > briefly. REPEAT TRCK will appear briefly in the display, RPT will light up in the display.
Stopping the MIX function
To repeat the entire CD currently
playing, press 4 RPT > again. REPEAT DISC will appear briefly in the display, RPT will light up in the display. Stopping the REPEAT function
Scanning all of the tracks on all of the CDs (SCAN) To scan all of the tracks on all of
the CDs in ascending order, press OK ; for longer than two seconds. SCAN will appear in the display. Stopping the SCAN function
To stop the REPEAT function for
the current track or CD, press 4 RPT > repeatedly until REPEAT OFF appears in the display and RPT no longer lights up.
OK ; briefly. The track currently scanned will continue playing. Note: It is possible to adjust the scan time. For more information, read the section on Adjusting the scan time in the chapter on Radio Operation.
Playing tracks in random order (MIX) To play the tracks of the currently
selected CD in random order, press 5 MIX > briefly. MIX CD will appear briefly in the display, MIX will light up in the display.
To play the tracks of all of the CDs
in random order, press 5 MIX > again. MIX ALL will appear briefly in the display, MIX will light up in the display. Note: The CDC A 08 and the IDC A 09 are also able to play all of the CDs in the changer in random order. The other CD changers first play all of the tracks on a CD in random order and then select the next CD in the changer.
Displaying the clock briefly To display the time briefly, press

/ DIS 7 briefly.

Activating the clock for display when the car audio system is switched off To activate the clock for display
when the car audio system is switched off, press MENU 8. MENU will appear in the display.

Setting the time To set the time, press MENU 8.
MENU will appear in the display.

Press Press

: until CLOCKSET appears in the display. :.
: repeatedly until CLK DISP OFF or CLK DISP ON appears in the display.
or : to switch the clock display on or off. press MENU 8 or OK ;.
The time will appear in the display. The minutes will flash and can be altered.
Once you have made the setting, Displaying the time briefly when the car radio is switched off
To display the time briefly when the car radio is switched off,

: to alter the min-

Once you have altered the minutes, press :. The hours will begin to flash.

hours.

: to alter the

/ DIS 7.

Once you have set the time, press

MENU 8 or OK ; twice.

The time will then appear in the display for eight seconds.
Selecting the 12/24-hour time display mode Press MENU 8.
: repeatedly until 24 H MODE or 12 H MODE appears in the display. : to switch the dis-

or play mode.

Once you have selected the mode,

press MENU 8 or OK ;. 16

TONE AND BALANCE/FADER
Loudness boosts the bass and treble when the volume is low to create a more natural sound.
Adjusting the tone and balance/fader
Adjusting the bass To adjust the bass, press AUD /
LD =. BASS will appear in the display.
Switching Loudness on/off
Press AUD / LD = for approx. two
seconds. LD will light up in the display to indicate that Loudness is active.

: to alter the bass.

Adjusting the treble To adjust the treble, press AUD /
Adjusting Loudness intensity
The Loudness boost can be set in stages from one to six.

Press MENU 8.

: until TREBLE appears in the display. or : to alter the treble.
Adjusting the balance To adjust the balance, press AUD /
: repeatedly until LOUDNESS appears in the display.
or : to alter the Loudness setting. ing the settings, press MENU 8 or OK ;.
Once you have completed adjust-

: until BALANCE appears in the display. or : to alter the bal-
Adjusting the fader To adjust the fader, press AUD /
: until FADER appears in the display. or : to alter the fader.

BASS CENTER

BASS CENTER frequency adjustment
The bass center frequency adjustment allows you to adjust the bass mid-frequency to suit the sound system in your automobile (50 Hz or 100 Hz).
Adjusting the spectrometer
The spectrometer in the display uses symbols to temporarily indicate what adjustments are made to the volume, the tone and balance/fader and the equalizer settings. If no adjustments are being made to the system, the spectrometer displays the output level of the car radio. You can select the type of spectrometer you want displayed in the menu. There are two different types available. Selecting the spectrometer type
To set the bass mid-frequency,
press EQ <. BASS CENTER will appear in the display.
or : to switch between 50 Hz and 100 Hz. ing the settings, press EQ < or OK ;.
: repeatedly until EQ DISPLAY appears in the display.
or : to select either SPECTRUM 1, SPECTRUM 2 or EQ DISP OFF. ing the settings, press MENU 8 or OK ;.

EXTERNAL AUDIO SOURCES

External audio sources
In place of the CD changer it is also possible to connect other external audio sources to the line output. These sources can include a portable CD player, MiniDisc player or MP3 player. You must activate the AUX output in the menu. If you would like to connect another external audio source, you will require an adapter cable. This adapter cable can be ordered from any authorized Blaupunkt dealer.

SPECIFICATIONS

Amplifier
Output power: 4 x 25 watts sinus acc. to DIN at 14.4 V 4 x 40 watts max. power

Specifications

Wavebands: FM : AM : 87.5 107.9 MHz kHz
Switching the AUX output on/off Press MENU 8.
FM frequency response: 30 - 15000 Hz
: repeatedly until AUXIN-1 OFF or AUX-IN-1 ON appears in the display. or : to switch AUX on

Frequency response: 20 - 20000 Hz

or off.

Once you have completed your selections, press MENU 8 or OK ;. Note: If the AUX input has been switched ON, you can select it by pressing CDC @.

Preamp Out

4 channels: 4V
Subject to technical modification! 19
Service numbers / Numros du service aprs-vente / Nmeros de servicio / Nmero de servio
Tel.: Deutschland Belgique / Belgi France Nederland Great Britain Danmark Sverige Norge Suomi sterreich

Fax: 36 01-39-708-229

esk republika USA Singapore Slovensko

01-39-800-212

Blaupunkt-Werke GmbH

Bosch Gruppe

02/00 TRO K7/VKD 402 211