In Car Video

IVMS-5802 IVMS-6502
Operating and installation instructions

http://www.blaupunkt.com

DEVICE OVERVIEW

Device overview

5.8" and 6.5" TFT-LCD screen

V I DEO

5.8"/ 6.5" TFT LCD screen for headrests On/off switch Key for screen menu display (OSD menu) Up menu Down menu AV channel setting (AV1 - AV2 -.)
Headphone socket Video input (internal) Connecting cable Interface cable AV signal converter unit

TABLE OF CONTENTS

5.8" and 6.5" TFT-LCD screen. 14
DEUTSCH DANSK PORTUGUS ESPAOL SVENSKA NEDERLANDS ITALIANO FRANAIS ENGLISH
Device overview. 14 General information.. 16
Important notes.. 16 Safety notices. 16
Removal.. 21 OSD menu.. 22

Operation.. 22

IR remote control. 23

Functions.. 23

Accessories.. 17
Accessories supplied.. 17 Available accessories.. 17

Specifications. 24

5.8" screen.. 24 6.5" screen.. 25

Fitting.. 17

Monitor installation.. 17 Prepare the working area. 17 Mark out the dimensions. 17 Carefully cut open the headrest cover.. 18 Open the headrest and remove filling and other items. 18 Lay the cable through the headrest. 19 Insert the mounting frame in the headrest.. 19 Inserting the monitor.. 19 Check and adjust the monitor then apply the Velcro strips. 20 Example of a direct connection to a DVD player. 20 Positive connection.. 20 Negative (ground) connection. 21

Connection diagram. 109

General information
Thank you for choosing a Blaupunkt product. We hope you enjoy using this new piece of equipment. Please read these operating instructions before using the equipment for the first time. The Blaupunkt editors are constantly working on making the operating instructions clearer and easier to understand. However, if you still have any questions on how to operate the device, please contact your dealer or the telephone hotline for your country. You will find the telephone number printed at the back of this booklet. We provide a manufacturer guarantee for our products bought within the European Union. You can view the guarantee conditions at www.blaupunkt.de or ask for them directly at: Blaupunkt GmbH Hotline Robert Bosch Str. 200 D-31139 Hildesheim To avoid the risk of electrical shock, the device must be protected from water and moisture, and must not be opened. Dangerously high voltages are generated inside the device. We wish to point out that the right to claim against warranty is invalidated by any changes or modifications to the device that have not been explicitly approved by the manufacturer. Long-term operation or storage outside the specific temperature range can lead to a shortening of the useful life of the LC display.

Safety notices

Please observe the following safety notices during installation and whilst making the connections. - Disconnect the negative and positive terminals of the battery. - When doing so, please observe the safety notices provided by the vehicle manufacturer. - Before drilling the holes necessary for mounting the equipment and for laying cables, please make sure that concealed cables, the fuel tank and fuel lines cannot be damaged in the process!

Important notes

This device is not intended for fitting in the forward section of the passenger compartment where it could also be seen by the driver. Fitting this device in any part of the vehicle where it could interfere with or distract the drivers attention is dangerous and is not permitted. The manufacturer cannot accept responsibility for any damage caused as a result of improper fitting of this device. 16

ACCESSORIES

Accessories

Accessories supplied

Connecting cable Extraction tool Operating instructions Mounting plate Adapter cable for a direct connection to an AV source - IR remote control IVRC-06

FITTING

Monitor installation
Note: It is recommended that the fitting is carried out at a specialist workshop.

Fitting

Prepare the working area Remove the headrest, and place it
on a working surface that has been cleared and cleaned, where the further assembly procedures may be carried out. Note: Take appropriate action to ensure that the headrest is not damaged while fitting the monitor.

Available accessories

- Monitor bracket 7608009300 The installation instructions are included with the bracket. Note regarding VIDEO IN/AUX: Only use original Blaupunkt accessory 001 510. Or else use a mono plug.
Mark out the dimensions Feel the covering of the headrest
carefully to ensure that there are no invisible parts that would prevent the monitor from being fitted. Mark out the surface that needs to be cut out - its size must match that of the installation frame.
Open the headrest and remove filling and other items Carefully lift the covering material

away from the cut area.

Adjust the cutting depth of the knife
to about 2.5 cm, and cut into the headrest following a line about 0.5 cm inside the marked edge. Carefully lift the filling material at one corner, and cut deeper into the material with the knife. Remove the filling material in small pieces. As you do this, lift one piece of the filling material, and ensure that the cut is being made to an even depth. To remove other pieces, use a Dremel saw or another suitable tool. Insert the monitor to check that it will fit into the cut area, and make adjustments if necessary.
Carefully cut open the headrest cover
Use a knife with an adjustable cutting depth to cut out the planned area. Make the first cut inside the marked area at a point about 0.5 cm from one of the corners, then make a diagonal cut to a point about 0.5 cm from the opposite corner. Make a similar cut between the other two diagonally opposed corners.

DEUTSCH

Lay the cable through the headrest Now pass the supplied cables through the opening so that they emerge from the underneath of the headrest. If possible, cover the cable with a cable tunnel. Now connect the power supply, ground and video signal cables, to check that the monitor is working.
Inserting the monitor Before connecting the monitor, pass
the connecting cables through the holes provided in the mounting plate, as shown in the illustration. Insert the monitor into the mounting plate, and attach it with appropriate fastenings.

the connecting cables through the holes provided in the mounting plate, as shown in the illustration. Insert the mounting plate into the area that has been cut out, and fix it in place with appropriate fastenings.

Monitor Mounting plate

ESPAOL

PORTUGUS

SVENSKA
Insert the mounting frame in the headrest Before connecting the monitor, pass

NEDERLANDS

ITALIANO

FRANAIS

ENGLISH
Check and adjust the monitor then apply the Velcro strips Connect the monitor, place it temporarily in the cut-out, and place the headrest into position. Check the various monitor settings such as brightness, headphone function, volume control and so on. Then attach the Velcro strips to the rear of the monitor, and push the frame onto the headrest. Take care not to press the screen itself, and apply pressure only in the region of the frame.
Example of a direct connection to a DVD player
Adapter cable for a direct connection to an AV source

DVD - Player (IVDP-01)

Audio L out Audio R out

Video out

Digital AV out in

IVMS 5802/6502

Positive connection
Connect the fuse holder to protect the positive cable (+12 V). The fuse holder should be connected to the positive terminal at a distance of max. 30 cm from the vehicle battery (if necessary, drill a hole in the bulkhead and use the appropriate cable grommets).

Masse /GND +12V

Negative (ground) connection
Attach the negative cable (earth/GND) directly to the vehicle body using a screw. Scratch the surface down to the bare metal at the point at which the ground is made. If the installation requires holes to be drilled or any other changes to be made to the vehicle, please contact a specialist workshop in your area.

REMOVAL

To remove the screen, insert the extraction tool between the screen and the mounting plate. Insert the extraction tool at the place where a slot has been provided between the screen and the mounting plate.

Removal

Extraction tool

OSD MENU

OSD menu
Operation Press the MENU button on the display or on the remote control to open the OSD menu. Use the arrow buttons / to select the options and after you press the MENU button you can use the / to change the arrow buttons settings. Press the EXIT option to close the OSD menu again.
TINT: To adjust the picture shade (only for NTSC) REVOLVE: To revolve the screen display - LEFT - RIGHT Horizontally mirrored - UP - DOWN Vertically mirrored RESET PICTURE: To reset the configured parameters to the factory default settings. EXIT: To close the OSD menu
ZOOM BRIGHTNESS CONTRAST COLOR TINT REVOLVE LEFT-RIGHT UP-DOWN RESET PICTURE EXIT
ZOOM (picture size): Change the picture height/width - FULL - NORMAL - WIDE BRIGHTNESS To adjust the brightness CONTRAST: To adjust the contrast COLOR: To adjust the colour

IR REMOTE CONTROL

Functions
The supplied remote control is suitable for operating the following monitors: IVMS-5802 and IVMS-6502. 1 POWER On/off button for the monitor. 2 TV/VIDEO No function. 3 VOL arrow button Increase the volume for the selected monitor. VOL arrow button Decrease the volume for the selected monitor. 4 MUTE Mute the volume of the loudspeakers inside the monitor. 5 CH arrow button / Channel selection if the monitor is connected to a signal controller IVSC-3302 or IVSC-5502. Caution: The way the CH / buttons function depends on the monitor selection (which is made using the signal controllers remote control). 6 Menu See OSD menu, operation (page 22).

IR remote control

POWER TV/VIDEO

IVRC-06

SPECIFICATIONS

Specifications

5.8" screen
System: Power supply / consumption: Standby: Video input level: Audio input level: Operating temperature: Storage temperature: Screen size (diagonal): Contrast ratio: Power consumption: Brightness: Display technology: Resolution (pixels): Visible screen area: Viewing angle: NTSC/PAL auto switch 12 V direct current, 10%, <900 mA < 1 mA 1 Vpp, 75 ohms 0 - 0.3 Vrms, 20 Hz - 20 kHz -20 C to +60 C -30 C to +80 C 5.8" (14.7 cm) 60 < 11 W 300 cd/m2 TFT active matrix system 1200 (H) x 234 (W) = 280,800 pixels 127.20 (W) x 71.84 (H) mm From the left and right: 60, From above: 60, From below: (W) x 122 (H) x 26.7 (D) mm < 400 g
Total monitor dimensions: Monitor weight:

6.5" screen

System: Power supply / consumption: Standby: Video input level: Audio input level: Operating temperature: Storage temperature: Screen size (diagonal): Contrast ratio: Power consumption: Brightness: Display technology: Resolution (pixels): Visible screen area: Viewing angle: NTSC/PAL auto switch 12 V direct current, 10%, <900 mA < 1 mA 1 Vpp, 75 ohms 0 - 0.3 Vrms, 20 Hz - 20 kHz -20 C to +60 C -30 C to +80 C 6.5" (16.5 cm) 60 < 10 W 280 cd/m2 TFT active matrix system 1200 (H) x 234 (W) = 280,800 pixels 142.80 (W) x 87.70 (H) mm From the left and right: 60, From above: 60, From below: 30 176.0 (W) x 122 (H) x 26.7 (D) mm < 400 g

In Car Video

IVSC-5502
Operating and installation instructions

http://www.blaupunkt.com

CONTENTS

General information.. 11

Installation and safety notices. 11 Accessories.. 11
Supplied parts. 12 Switching on/off.. 12
Switching on the signal controller. 12 Switching off the signal controller. 12

Settings.. 13

External monitor switch (Fig. 2). 13 Monitor connections.. 13

IR remote control. 13

Functions.. 13 Settings for Audio OUT.. 14

Installation.. 15

Installation and safety notices. 15 Positive connection.. 15 Switching positive.. 15 Fuse... 15 Negative (ground) connection. 15

Specifications. 16

Features.. 17

Connection diagrams. 72

GENERAL INFORMATION
Thank you for choosing a Blaupunkt product. We hope you enjoy using this new piece of equipment. Please read these operating instructions before using the equipment for the first time. The Blaupunkt editors are constantly working on making the operating instructions clearer and easier to understand. However, if you still have any questions on how to operate the device, please contact your dealer or the telephone hotline for your country. You will find the telephone number printed at the back of this booklet. We provide a manufacturer guarantee for our products bought within the European Union. You can view the guarantee conditions at www.blaupunkt.de or ask for them directly at: Blaupunkt GmbH Hotline Robert Bosch Str. 200 D-31139 Hildesheim
DEUTSCH DANSK PORTUGUS ESPAOL SVENSKA NEDERLANDS ITALIANO FRANAIS ENGLISH

General information

Installation and safety notices
Before connecting your signal controller, please read the following information carefully. The batterys negative terminal must be disconnected for the entire time it takes to install and connect this device.
When doing so, observe the vehicle manufacturers safety notices (airbags, alarm systems, trip computers, immobilizers). Before drilling any holes, make sure that no installed cables or vehicle components can be damaged. When installing the signal controller, select a location in the vehicle that allows you to attach it firmly into place using screws. The installation location should be such that the signal controller does not get in the way of the driver and cannot endanger the occupants in the event of the vehicle suddenly coming to a halt, for instance, during an emergency stop. The IR remote control should not be installed within the inflation range of airbags (driver, passenger side, side airbags) or in any position where it could be struck by the vehicle occupants heads or knees. With regard to the installation location and the attachment using an adhesive pad, check and ensure that the holding strength of the installation surface is sufficient and suitable for all situations and safety requirements.

Accessories

We recommend you use accessories that have been approved by Blaupunkt.

SUPPLIED PARTS

Supplied parts
The signal controller is supplied with all the parts listed below. Please check that the range of parts supplied with your device is complete. If one of the listed parts is missing, please contact your dealer immediately.

SWITCHING ON/OFF

Switching on/off
Switching on the signal controller
The signal controller is switched on via the +12V ignition switching line by the connected control device.
Signal controller 003 551
Switching off the signal controller
The signal controller is switched off via the +12V ignition switching line by the connected control device.Switching on/ off.

Connecting cable

Screws

IR remote control

IR receiver

SETTINGS

Settings
External monitor switch (Fig. 2)
Switch position on right: No external monitor connected. Switch position on left: If a Blaupunkt navigation (RGB) monitor is connected via a Y-cable (001 600).

IR REMOTE CONTROL

Functions
The supplied remote control is suitable for operating the signal controller and the monitors. You must enter a button combination in order to control a single monitor or all the monitors simultaneously. To do so, you first select the monitor (FRONT/LEFT/RIGHT-OVERHEAD or ALL) and then the function that you require. The selected monitor or monitors remain(s) selected until you press one of the buttons (FRONT/ LEFT/RIGHT-OVERHEAD or ALL) again. 1

POWER NAVI MUTE

Note: From the FRONT, LEFT, RIGHT and OVERHEAD monitor output, you can optionally assign the 8 or 13 PIN jack.

< ; : 9 8

BOOSTER AUDIO CH VOL

ALL RIGHT

OVERHEAD

IVRC 05

PORTUGUS

ESPAOL

SVENSKA

NEDERLANDS

ITALIANO

FRANAIS

Monitor connections

ENGLISH

DEUTSCH
1 POWER On/off button for the selected monitor or monitors. 2 NAVI Selects the navigation monitor. 3 VOL arrow button Increase the volume for the selected monitor (not Audio OUT). VOL arrow button Decrease the volume for the selected monitor (not Audio OUT). 4 MUTE Mute the volume for all the connected monitors and Audio OUT. 5 CH arrow button / Select the input source for the selected monitor. 6 RIGHT Selects the right monitor. 7 OVERHEAD Selects the overhead monitor. 8 ALL Select all monitors. 9 LEFT Select the left monitor. : FRONT Select the front monitor.

Settings for Audio OUT

; AUDIO CH Arrow button / Select the input source for Audio OUT. Note: The volume of the input source must be adjustable. < BOOSTER Setting the amplification for Audio 0 dB or 10 dB. OUT /

INSTALLATION

Before connecting your signal controller, please read the following information carefully. The batterys negative terminal must be disconnected for the entire time it takes to install and connect this device. When doing so, observe the vehicle manufacturers safety notices (airbags, alarm systems, trip computers, immobilizers). Before drilling any holes, make sure that no installed cables or vehicle components can be damaged. When installing the signal controller, select a location in the vehicle that allows you to attach it firmly into place using screws. The installation location should be such that the signal controller does not get in the way of the driver and cannot endanger the occupants in the event of the vehicle suddenly coming to a halt, for instance, during an emergency stop. The IR remote control should not be installed within the inflation range of airbags (driver, passenger side, side airbags) or in any position where it could be struck by the vehicle occupants heads or knees. With regard to the installation location and the attachment using an adhesive pad, check and ensure that the holding strength of the installation surface is sufficient and suitable for all situations and safety requirements.

Installation

Note: Before connecting the monitors to your signal controller, check that the +/- and switching positive connections are working properly.

Positive connection

Connect the fuse holder (1A fuse) to protect the positive cable (permanent (1), see Fig. 1). The fuse holder should be connected to the positive terminal at a distance of max. 30 cm from the vehicle battery (if necessary, drill a hole in the bulkhead and use the appropriate cable grommets).

Switching positive

Connect the switching positive cable (2) (see Fig. 1) to the switching positive ) of the main deoutput (ignition vice (e.g. car radio or navigation device). If connecting to terminal 15 of the vehicle, protect the switching positive cable (2) by installing a fuse holder (1A fuse) at a maximum distance of 20 cm from the point of connection.
If the fuse needs to be replaced, never bypass/bridge the fuse and never replace it with fuse types that are designed for higher currents.
Negative (ground) connection
Attach the negative cable (1) (earth/ GND, (3), see Fig. 1) directly to the vehicle body using a screw. Scratch the surface down to the bare metal at the point at which the ground is made. If the installation requires holes to be drilled or any other changes to be 15
made to the vehicle, please contact a specialist workshop in your area. Note: You cannot display PAL video on the wide vision TV monitor using the RGB input. In this case, the PAL video signal must be connected directly to the AV input of the wide vision TV monitor.

SPECIFICATIONS

Specifications
Video input: Composite Video, 1.0 Vpp, 75 ohms Audio input: 0 - 1.0 Vrms, 20 Hz-20 kHz (Booster off) 0 - 0.3 Vrms, 20 Hz-20 kHz (Booster on) RGB input (video signal): 0.7 VPP, 75 ohms RGB input (composite-sync): 0.7 VPP, 75 ohms Video output: Composite video, 1.0 Vp-p, 75 ohms Audio output: 0 - 1.0 Vrms, 20 Hz - 20 kHz RGB output (video signal): 0.7 VPP, 75 ohms RGB output (composite-sync): 1.0 VPP, 75 ohms Power supply: DC 12V, +/- 10%, max. 5A Operating temperature: -20 to +70 Celsius Dimensions: 205 x 45 x 146 mm (W x H x D)
5 Audio inputs: Cinch jacks 4 Video inputs: Cinch jacks 1 RGB input: 15 pin Sub-D socket 4 monitor outputs: Composite video, audio L/R, control, 13-pin (8-pin) jack, with power, earth and switching positive 1 RGB output: 15-pin Sub-D plug-type connector 1 Audio output: Cinch jacks 10dB booster on/off Conversion: RGB to CCVS CCVS to RGB IR remote control IR receiver Power input: 4-pin plug-type connector Metal housing

SVENSKA DEUTSCH

Features
Anschlussbilder Connection diagrams Schma lectrique Schemi di allacciamento Aansluittekeningen Anslutningsbilder Esquemas de conexin Esquemas de ligao Tilslutningsskemaer

Fig. 1

DC 12V IN

Ext-monitor IR CH5

RGB-IN

AUDIO-IN

+12V Ignition (2) +12V Permanent (1) (Batterie, battery) (3) Masse / GND

Fig. 2

Audio in-right Audio in-left

Video in

IR-Empfnger (Eingang) IR receiver in Externer Monitorschalter

Fig. 3

RGB OUT FRONT LEFT RIGHT OVERHEAD

Audio OUT

MONITOR

IVMR 9002 IVMR 1042

IVMS 6502

IVMS 5802

Navi- Monitor

(right) (left) Audio OUT

Video out

Digital out AV in

Speakers

CDC-A08 IDC-A09

Audio L out Audio R out
Signal Controller IVSC-5502
Video 4 Audio L 4 Audio R 4 RGB IN Audio IN

Front Monitor

IVMS 5802/6502 IVMR 9002/1024
Video 3 Audio L 3 Audio R 3
Car Radio DVD - Player (IVDP-01) DX-N/V RGB out Video in

2x Aux-in

DX-N/V Monitor
Beispielanschluss mit verschiedenen Komponenten / Connection example with various components

Amplifier

Preamp CDC AUX 2 in out in
Video 1 Audio L 1 Audio R 1
Audio OUT RGB OUT M4 Overhead Monitor M3
Anschlusskabel/Additional Cables:
Video 2 Audio L 2 Audio R 2

RCA-Cable

(1,3m) (5m)

RGB-Y-Cable

001 600

C1-4x Cinch

(0,35m)
Right Monitor Left Monitor M2

AUX 2-in RGB-Cable

(1,5) (4m)
Service-Nummern / Service numbers / Numros du service aprsvente / Numeri del servizio di assistenza / Servicenummers / Telefonnummer fr service / Nmeros de servicio / Nmeros de servio / Servicenumre
Country: Germany Austria Belgium Denmark Finland France Great Britain Greece Ireland Italy Luxembourg Netherlands Norway Portugal Spain Sweden Switzerland Czech. Rep. Hungary Poland Turkey USA Brasil (Mercosur) (D) (A) (B) (DK) (FIN) (F) (GB) (GR) (IRL) (I) (L) (NL) (N) (P) (E) (S) (CH) (CZ) (H) (PL) (TR) Phone: 0180-5000225 01-02-360 09-01-01-01-4149400 02-023-66-01-902-120234 08-7501500 01-8471644 02-01-0800-118922 0212-3350677 Fax: 05121-01-91 02-44-09-01-01-01-4598830 02-023-66-01-916-467952 08-7501810 01-8471650 02-01-022-8771260 0212-3460040 708-6817188 WWW: http://www.blaupunkt.com

(USA) 800-2662528

+55-2769 +55-2773
Malaysia (Asia Pacific) (MAL) +604-6382 474

+604-6413 640

Blaupunkt GmbH

07/03 CM/PSS - 403 778