www.blaupunkt.com

Radio CD MP3 WMA

Daytona MP28 Laguna MP28

492 110
Operating and installation instructions Mode demploi et de montage Instrucciones de manejo e instalacin Instrues de servio e de montagem
01DaytonaLagunaMP28_gb.indd 1

2/15/08 2:32:35 PM

Daytona MP28

Laguna MP28

Daytona/Laguna MP28
01DaytonaLagunaMP28_gb.indd 2

2/15/08 2:32:39 PM

Controls
2 Rocker switch 3 MENU button Calls up the menu for basic settings. 4 SRC button Source selection between radio, CD and AUX. 5 Volume control 6 On/Off button Short press: Switches the device on. In operation: Mutes the device. Long press: Switches the device off. 7 Display 8 DIS button Changes display contents. 9 TS button Starts the Travelstore function. : AUD button Sets bass, treble, middle, balance, and fader. Selects an equaliser presetting. ; AUX input < Switching X-BASS on/off = Numeric key pad > BAND button Selects the FM memory banks and AM waveband. @
arrow button Short press: Radio mode: Manual search in the selected frequency band. CD/MP3/WMA mode: Previous track. Long press: Radio mode: Automatic seek tuning in the selected frequency band. CD/MP3/WMA mode: Fast reverse.
A CD tray B Reset button Can only be pressed with a pointed object. C button (eject) to eject the CD from the device.
D SRC/MENU button (remote control) Short press: Source selection between radio, CD and AUX. Long press: Calls up the menu for basic settings. E BND/TS button (remote control) Short press: Selects the FM memory banks and the AM waveband. Long press: Starts the Travelstore function. F Battery compartment (remote control)
01DaytonaLagunaMP28_gb.indd 3

ENGLISH

button to open the detachable control panel (ip-release panel).
arrow button Short press: Radio mode: Manual search in the selected frequency band. CD/MP3/WMA mode: Next track. Long press: Radio mode: Automatic seek tuning in the selected frequency band. CD/MP3/WMA mode: Fast forward.

Contents

About these instructions.. 6 Symbols used.. 6 Use as directed.. 6 Declaration of conformity. 6 For your safety.. 7 If you are installing device yourself. 7 Observe the following.. 7 Cleaning instructions. 7 Disposal of old unit. 7 Scope of delivery. 8 Optional equipment.. 8 Remote control.. 8 Warranty.. 9 Service.. 9 Detachable control panel. 9 Theft protection. 9 Detaching the control panel.. 9 Attaching the control panel. 10 Timeout function.. 10 Switching on/off.. 11 Switching on/off.. 11 Switching on/off using the vehicle ignition... 11 Switching the device on/off using the detachable control panel. 11 Adjusting the volume.. 11 Power-on volume.. 11 Quickly reducing the volume (MUTE). 11 Muting during telephone mode. 12 Switching the conrmation beep on/off.. 12
Radio mode.. 13 Adjusting the tuner.. 13 Switching to radio mode.. 13 Selecting the waveband/ memory bank.. 13 Tuning into a station.. 13 Setting the sensitivity of station seek tuning.. 14 Storing stations.. 14 Listening to stored stations. 14 CD mode... 15 Starting the CD mode. 15 Selecting tracks.. 15 Fast searching (audible). 15 Random track play (MIX).. 16 Scanning tracks (SCAN). 16 Repeating tracks (REPEAT). 16 Interrupting playback (PAUSE). 16 Changing the display.. 17 Ejecting a CD.. 17 MP3/WMA mode.. 17 Preparing an MP3/WMA CD. 17 Switching to MP3 mode. 18 Changing the display.. 18 Selecting a directory.. 18 Selecting tracks/les.. 18 Fast searching (audible). 18 Random track play (MIX).. 19 Scanning tracks (SCAN). 19 Repeating tracks (REPEAT). 19 Interrupting playback (PAUSE). 19 Settings.. 20 Changing the display brightness (day/night mode).. 20 Menu settings.. 20

01DaytonaLagunaMP28_gb.indd 4
Sound.. 21 Adjusting the bass.. 21 Adjusting the treble. 21 Setting the left/right volume distribution (balance). 22 Adjusting the front/rear volume distribution (fader). 22 X-BASS.. 22 Equalizer presettings (presets). 23 External audio sources. 23 Resetting the device (Reset). 24 Technical data.. 24 Amplier.. 24 Tuner.. 24 CD.. 24 Preamp Out.. 24 AUX input sensitivity.. 24 Installation instructions. 137
01DaytonaLagunaMP28_gb.indd 5

2/15/08 2:32:40 PM

About these instructions
These instructions contain important information to easily and safely install and operate the device. Read these instructions carefully and completely before using the device. Keep the instructions at a location so that they are always accessible to all users. Always pass on the device to third parties together with these instructions. In addition, observe the instructions of the devices used in conjunction with this device.

Use as directed

This device is intended for installation and operation in a vehicle with 12 V vehicle system voltage and must be installed in a DIN slot. Observe the 'performance limits in the technical data. Repairs and installation, if necessary, should be performed by a specialist.
Declaration of conformity
The Blaupunkt GmbH declares that the device complies with the basic requirements and the other relevant regulations of the directive 89/336/EWG.

Symbols used

These instructions employ the following symbols: CAUTION! Warns about laser beam DANGER! Warns about injuries CAUTION! Warns about damaging the CD drive The CE mark conrms the compliance with EU directives. u Identies a sequencing step Identies a listing
01DaytonaLagunaMP28_gb.indd 6

For your safety

The device was manufactured according to the state of the art and established safety guidelines. Even so, dangers may occur if you do not observe the safety notes in these instructions.
If you are installing device yourself
You may only install the device yourself if you are experienced in installing car sound systems and are very familiar with the electrical system of the vehicle. For this purpose, observe the installation instructions at the end of these instructions.

Observe the following

CAUTION! The device contains a Class 1 laser that can cause injuries to your eyes. Do not open the device and do not perform any modications. DANGER! Increased risk of injury from connector In case of an accident, the protruding connector in the front AUX-IN socket may cause injuries. The use of straight plugs or adapters can lead to an increased risk of injury. It is, therefore, recommended to use angled jack plugs, e.g. the Blaupunkt accessories cable (001 535).

Cleaning instructions

Solvents, cleaning and scouring agents as well as dashboard spray and plastics care product may contain ingredients that will damage the surface of the device. Use only a dry or slightly moistened cloth for cleaning the device.

Disposal of old unit

Do not dispose of your old unit in the household trash! Use the return and collection systems available to dispose of the old device.
01DaytonaLagunaMP28_gb.indd 7
In operation: Operate the device only if trafc situation permits it! Stop at a suitable location to perform more extensive operations. Remove or attach the control panel only while the vehicle is standing an. To protect your hearing, always listen at a moderate volume. During mute phases (e.g. when changing the audio source), changing the volume is not audible. Do not increase the volume during this mute phase. Always listen at a moderate volume so that you can always hear acoustic warning signals (e.g. police). After operation: The device is worthless to a thief without the control panel. Always remove the control panel whenever you leave the vehicle. Transport the control panel so that it is protected against impacts and the contacts cannot become dirty.

Scope of delivery

Remote control
Do not discard the depleted battery of the remote control in the household trash, but return it to the corresponding collection centres.
Your car sound system is equipped with a handheld remote control. Most of the functions can be operated conveniently and safely with the remote control. Note that a line of sight must exist between the remote control and the remote control receiver, which is located in the detachable control panel.
The scope of delivery includes: 1 Car sound system 1 Support frame 2 Disassembly tools 1 Perforated strip 3 Connecting cables 1 Case 1 Operating instructions 1 Remote control

Optional equipment

Blaupunkt offers a wide selection of optional equipment. This includes antennas, ampliers, loudspeakers, connecting cables and much more. You can nd out from your Blaupunkt dealer or on the Internet at www.blaupunkt.com which optional equipment can be used with your device. Use only accessories approved by Blaupunkt.

01DaytonaLagunaMP28_gb.indd 8

Warranty

Detachable control panel
We provide a manufacturer's warranty for products bought within the European Union. For devices purchased outside the European Union, the warranty terms issued by our respective responsible domestic agency are valid. The warranty terms can be called up under www.blaupunkt.com or requested directly from: Blaupunkt GmbH Hotline Robert-Bosch-Str. 200 D-31139 Hildesheim, Germany

Theft protection

The device is equipped with a detachable control panel (ip-release panel) as a way of protecting your equipment against theft. The device is worthless to a thief without this control panel. Protect your device against theft by taking the control panel with you whenever you leave your vehicle. Do not leave the control panel inside your vehicle not even in a hiding place. Notes: Never drop the control panel. Do not expose the control panel to direct sunlight or another heat source. Avoid direct skin contact with the control panels electrical contacts. If necessary, clean the contacts with a lint-free cloth moistened with cleaning alcohol.

Service

In some countries, Blaupunkt offers a repair and pick-up service. Information about the availability of this service in your country can be found at www.blaupunkt.com. If you want to take advantage of this service, you may request a pick-up service for your device via the Internet.
Detaching the control panel
u Press the button 1. The control panel opens to the bottom.
u Grasp the control panel at the left side.
01DaytonaLagunaMP28_gb.indd 9

Timeout function

u Press the control panel slightly to the right side and then pull it straight out of the bracket. Notes: The device switches off as soon as the control panel is removed. The device remembers the audio source played last for the next switch-on. Any CD already inserted in the device remains there.
The device features a time-out function (time window). For example, if you press the MENU button 3 and select a menu item, the device switches back after approx. 5 seconds after the last button activation. The settings performed are saved.
Attaching the control panel
u Insert the control panel on the right side and press it slightly to the right (see Figure 1.). u Carefully push the control panel into the left bracket until it engages (see Figure 2.). u Fold the control panel up into the slot and press it gently into place until it engages (see Figure 3.). If the device was still switched on when you detached the control panel, it will automatically switch on with the last setting activated (radio, CD or AUX) when the panel is replaced.

Switching the conrmation beep on/off
If you press certain buttons of the device, a conrmation beep sounds. You can switch the beep on or off. Four volumes can be selected for the beep. u Press the MENU button 3. u Press the or button 2 repeatedly until "BEEP" appears on the display. u Press the ? or button @ to adjust the volume of the beep from 1 to 4. u To switch off the beep, press the ? or button @ repeatedly until "BEEP OFF" appears on the display. When you have nished making your changes, u press the MENU button 3 or wait 5 seconds. The settings are saved.
01DaytonaLagunaMP28_gb.indd 12

Radio mode

Adjusting the tuner
To ensure proper functioning of the tuner, the device must be set for the region in which it is being operated. You can select between Europe (EURO), America (USA) and Asia (ASIA). The tuner is factory-set to the region in which it was sold. If you experience problems with your radio reception, please check this setting. Note: The radio functions described in these operating instructions refer to the tuner setting for the USA. If you switch to a different region (ASIA, EURO), the user settings are lost. u Press the MENU button 3. u Press the or button 2 repeatedly until "AREA EURO", "AREA USA" or "AREA ASIA" appears on the display. u Select your tuner region with the ? or button @. u Press the MENU button 3 or wait 5 seconds. The settings are saved.
This device can be used to receive stations in the FM and AM frequency bands. There are three memory banks available for the FM waveband (FM1, FM2 and FMT) and one for the AM waveband. Six stations can be stored on the station buttons in each memory bank. You can use the menu to switch the AM waveband on or off. u Press the MENU button 3. u Press the or button 2 repeatedly until "AM ON" or "AM OFF" appears on the display. To switch the wavebands on or off, u press the ? or button @. The settings are saved. To switch between the FM1, FM2, FMT and AM memory banks, u press the BAND button >.

Tuning into a station

There are various ways of tuning into a station. Automatic station seek tuning u Press and hold down the ? or button @ for 2 seconds. The radio tunes into the next receivable station.

Switching to radio mode

If you are in the CD or AUX mode, u press the SRC button 4 repeatedly until a frequency appears on the display.
01DaytonaLagunaMP28_gb.indd 13

2/15/08 2:32:41 PM

Selecting the waveband/memory bank
Tuning into stations manually You can also tune into stations manually. To change the set frequency in small increments, u briey press the ? or button @ repeatedly until the desired frequency is set.
Storing stations automatically (Travelstore) You can automatically store the six stations offering the strongest reception in the region (FM only). The stations are stored in the FMT memory bank. Note: Any stations that were previously stored in this memory bank are deleted in the process. u Briey press the TS button 9. The storing procedure begins. "FM TSTORE" appears on the display. After the process has completed, the radio will play the station that is stored under station button 1 of the FMT memory bank.
Setting the sensitivity of station seek tuning
You can choose whether the radio should only tune into stations providing good reception or whether it can also tune into those with a weak reception. u Press the MENU button 3. u Press the or button 2 repeatedly until "SENS HIGH" or "SENS LOW" appears on the display. u Set the desired sensitivity with the ? or button @. When you have nished making your changes, u press the MENU button 3 or wait 5 seconds. The settings are saved.
Listening to stored stations
u Select the desired memory bank or waveband with the BAND button >. u Press one of the station buttons 1 - 6 =. The stored station is played if it can be received.

Storing stations

Storing stations manually u Select the desired memory bank FM1, FM2, FMT or AM waveband. u Tune into the desired station. u Press and hold down one of the station buttons 1 - 6 = for longer than 2 seconds to assign the station to that button. The settings are saved. 14
01DaytonaLagunaMP28_gb.indd 14

CD mode

You can use this device to play standard audio CDs, CD-Rs and CD-RWs with a diameter of 12 cm. CAUTION! Labelled or shaped CDs can damage the CD drive. Do not insert any shape CDs. Do not insert any 8-cm CDs. Do not attach labels to CDs since the label may detach during operation. Notes: Label CDs only by using a marker since it does not contain any caustic materials. Permanent markers can damage CDs. To ensure proper functioning, use only CDs with the Compact-Disc logo. Copy-protected CDs can cause playback problems. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs! Besides being able to play audio CDs on this device, you can also play CDs containing MP3/WMA music les. For further information, please read the chapter entitled "MP3/WMA mode".

Note: If the vehicle ignition was switched off prior to inserting the CD, you must switch the device on rst with the On/ Off button 6 to start the playback. If a CD is already inserted in the drive, u press the SRC button 4 repeatedly until the CD symbol appears on the display. The playback starts with the track played last.

Selecting tracks

u Press the ? or button @ to select the next or previous track. If you press the button @ once, the current track will be played again from the beginning.

Starting the CD mode

If there is no CD inserted in the drive, u press the button 1. The control panel opens.

Fast searching (audible)

To fast search backwards or forwards, u press and hold down the ? or button @ until fast searching forwards or backwards begins.
01DaytonaLagunaMP28_gb.indd 15
u Gently insert the CD with its printed side uppermost into the drive until you feel some resistance. The drive draws in the CD automatically. You must not hinder or assist the drive as it draws in the CD. u Gently close the control panel whilst exerting a little pressure until you feel it click into place. The CD starts playing.

Random track play (MIX)

To play back all tracks of a CD at random, u press the 4 MIX button =. The display shows "MIX". The next randomly selected track will then be played. Cancelling MIX u Press the 4 MIX button = again. The MIX symbol disappears. Normal playback is then resumed.
? or button @ to u Press the select from 5, 10 and 20 seconds. When you have nished making your changes, u press the MENU button 3 or wait 5 seconds. The settings are saved.
Repeating tracks (REPEAT)
If you want to repeat a track, u press the 3 RPT button =. The display shows "RPT". The track is repeated continuously until you deactivate Repeat. Cancelling Repeat If you want to cancel the repeat function, u press the 3 RPT button = again. The RPT symbol disappears. Normal playback is then resumed.

Scanning tracks (SCAN)

You can scan (briey play) all the tracks on the CD. u Press the 2 SCN button =. The display shows "SCN". The next track will then be scanned. Stopping SCAN To end the SCAN process, u press the 2 SCN button =. The SCN symbol disappears. The currently scanned track will then continue to be played normally. Adjusting the SCAN time The scan times for the SCAN function can be adjusted in the menu. u Press the MENU button 3. u Press the or button 2 repeatedly until "SCAN" appears on the display.
Interrupting playback (PAUSE)
To interrupt the video playback, u press the 1 button =. The display shows "PAUSE". Cancelling pause To continue the playback, u press the 1 button = during the pause. Playback is continued.
01DaytonaLagunaMP28_gb.indd 16

MP3/WMA mode

Note: The display can be changed only if the display of the clock in activated in the menu ("CLOCK ON") To display the CD track, u press the DIS button 8. The display changes for approx. 5 seconds.
You can also use this car sound system to play CD-Rs and CD-RWs that contain MP3 music les. You can also play WMA les. This chapters deals only with playing MP3 les since the operation for MP3 and WMA les is identical. Note: WMA les with Digital Rights Management (DRM) from online music shops cannot be played with this device.

Ejecting a CD

u Press the button 1. The control panel opens to the bottom. u Press the button C next to the CD compartment. The CD is ejected. u Remove the CD and close the control panel. Notes: If a CD is ejected, the drive will automatically draw it back in again after 10 seconds. You can also eject CDs whilst the device is switched off or whilst another audio source is activated.

Preparing an MP3/WMA CD

The various combinations of CD burners, CD burning software and CD blanks may lead to problems arising with the devices ability to play certain CDs. If problems occur with your own burned CDs, you should try another brand of CD blank or choose another colour of CD blank. The format of the CD must be ISO 9660 Level 1/Level 2 or Joliet. Other formats cannot be played reliably. Notes: To ensure uninterrupted playback: Do not try changing the le extension to ".MP3" of any les other than MP3 les and then attempt to play them. The device will ignore these invalid les during playback. Do not use "mixed" CDs containing both non-MP3 les and MP3 tracks (the device only reads MP3 les during MP3 playback).
01DaytonaLagunaMP28_gb.indd 17

Changing the display

Do not use mix-mode CDs containing both CD audio tracks and MP3 tracks. If you try playing a mix-mode CD, the device will only play the CD-audio tracks. MP3 ID3 tags MP3 tracks can contain additional information such as the artist, album and track name (ID3 tags). This device can display ID3 tags of version 1 and 2.

Switching to MP3 mode

MP3 mode is activated in the same way as normal CD mode. For further details, please read the section entitled "Switching to CD mode" in the "CD mode" chapter. Note: If an MP3 or WMA CD is located in the drive, the display shows "MP3" during MP3 mode.

You can display various types of information on the current track: Time Track Artist Genre File name To switch between the display options, u press the DIS button 8 repeatedly until the desired display is shown. The display changes for approx. 5 seconds.

Selecting a directory

To move up or down to another directory, u press the or button 2 once or several times.

Selecting tracks/les

To move up or down to another track or le in the current directory, u press the ? or button @ once or several times. If you press the button @ once, the current track will be played again from the beginning.
The following settings require that an MP3 CD is in the device. Notes: The time can be displayed only if the display of the clock in activated in the menu ("CLOCK ON") In case of more than 9 characters, the display shows scrolling text.
To fast search forwards or backwards, u Press and hold down the ? or button @ until fast searching forwards or backwards begins.
01DaytonaLagunaMP28_gb.indd 18

2/15/08 2:32:42 PM

To repeat a track, u briey press the 3 RPT button =. The display shows "RPT". The track is repeated continuously until you deactivate Repeat. To repeat a directory, u press the 3 RPT button = for longer than 2 seconds. "RPT" is ashing on the display. The directory is repeated continuously until you deactivate Repeat. Cancelling Repeat If you want to cancel the repeat function, u press the 3 RPT button = again. The RPT symbol disappears. Normal playback is then resumed.
You can scan (briey play) all the tracks on the CD. u Press the 2 SCN button =. The display shows "SCN". The next track will then be scanned. Stopping SCAN To end the SCAN process, u press the 2 SCN button =. The SCN symbol disappears. The currently scanned track will then continue to be played normally. Adjusting the SCAN time The scan times for the SCAN function can be adjusted in the menu. u Press the MENU button 3. u Press the or button 2 repeatedly until "SCAN" appears on the display. u Press the ? or button @ to select from 5, 10 and 20 seconds.

u Press the 1 button =. The display shows "PAUSE". Cancelling pause button = during the u Press the 1 pause. Playback is continued.
01DaytonaLagunaMP28_gb.indd 19
When you have nished making your changes, u press the MENU button 3 or wait 5 seconds. The settings are saved.

Settings

Changing the display brightness (day/night mode)
To change between bright (day) and dark (night), u press and hold down the DIS button 8 for longer than 2 seconds.
When you have nished making your changes, u press the MENU button 3 or wait 5 seconds. The settings are saved. Selecting 12/24-hour clock mode u Press the MENU button 3. u Press the or button 2 repeatedly until "HOUR 24" or "HOUR 12" appears on the display. ? or button @ to u Press the switch the mode. When you have nished making your changes, u press the MENU button 3 or wait 5 seconds. The settings are saved. Loading standard settings Note: Your user settings (audio, station memory) are overwritten when loading the standard settings. To load the standard settings, u press the MENU button 3. u Press the or button 2 repeatedly until "DEF OFF" appears on the display. u Press the ? or button @ until "DEF LOAD" (default load) appears on the display. u Press the MENU button 3 within 5 seconds (timeout function) to load the standard settings.

Menu settings

Your device features different settings in the menu: Setting the time To set the time, u press the MENU button 3. u Press the or button 2 repeatedly until "CLOCK ON" or "CLOCK OFF" appears on the display. You can adjust the time and the time mode only if the menu item is set to "CLOCK ON". u Press the MENU button 3. u Press the or button 2 repeatedly until the time appears on the display. ? or button @ to u Press the change the value. u Press the or button 2 to switch between hours and minutes. Note: If the menu item is set to "CLOCK ON", the device displays the time for all selected sources.
01DaytonaLagunaMP28_gb.indd 20
Switching the AUX input on/off You can switch the AUX input on or off in the menu. u Press the MENU button 3. u Press the or button 2 repeatedly until "AUX ON" or "AUX OFF" appears on the display. ? or button @ to u Press the switch the AUX input on or off. When you have nished making your changes, u press the MENU button 3 or wait 5 seconds. The settings are saved. Note If the AUX input is switched off in the menu, you cannot select the AUX input as source.
The sound settings for the volume distribution (balance and fader), X-BASS, bass, treble and DSP (Digital Sound Processor) apply to all the audio sources.

Adjusting the bass

You can adjust the bass level between -10 and +10. Adjusting the level u Press the AUD button : repeatedly until "BAS" appears on the display. u Turn the volume control 5 to adjust the level from -10 to +10. When you have nished making your changes, u wait 5 seconds. The settings are saved. Note: If an equalizer presetting (POP M, ROCK M, CLASSICS, FLAT) is selected, the manual increase of the bass level and treble is overwritten. As soon as another manual increase is performed, the equaliser switches off. For further information, please read the note in the section entitled "Equalizer presettings (presets)".

Adjusting the treble

You can adjust the treble level between -10 and +10.
01DaytonaLagunaMP28_gb.indd 21
Adjusting the level u Press the AUD button : repeatedly until "TRB" appears on the display. u Turn the volume control 5 to adjust the level from -10 to +10. When you have nished making your changes, u wait 5 seconds. The settings are saved. Note: If an equalizer presetting (POP M, ROCK M, CLASSICS, FLAT) is selected, the manual increase of the bass level and treble is overwritten. As soon as another manual increase is performed, the equaliser switches off. For further information, please read the note in the section entitled "Equalizer presettings (presets)".
Adjusting the front/rear volume distribution (fader)
To adjust the front/rear volume distribution (fader), u press the AUD button : repeatedly until "FAD" appears on the display. u Turn the volume control 5 to adjust the distribution from 10F to 10R. When you have nished making your changes, u wait 5 seconds. The settings are saved.

X-BASS

X-Bass allows you to increase the bass at low volume. The selected X-Bass setting is effective for all audio sources (radio, CD, MP3 or AUX). Switching X-BASS on/off u Press the X-BASS button < repeatedly until "LOUD ON" or "LOUD OFF" appears on the display. The settings are saved. "X-BASS" appears on the display if the function is activated.
Setting the left/right volume distribution (balance)
To adjust the left/right volume distribution (balance), u press the AUD button : repeatedly until "BAL" appears on the display. u Turn the volume control 5 to adjust the distribution from 10L to 10R. When you have nished making your changes, u wait 5 seconds. The settings are saved.
01DaytonaLagunaMP28_gb.indd 22

External audio sources

This device features an equaliser in which the settings for "FLAT" (linear) and the music genres "CLASSICS", "POP M" and "ROCK M" are already programmed. To select an equaliser setting, u press the AUD button : repeatedly until "FLAT", "CLASSICS", "POP M", "ROCK M" or "DSP OFF" appears on the display. u Turn the volume control 5 to select one of the settings or select "DSP OFF" to switch off the equaliser. When you have nished making your changes, u wait 5 seconds. The settings are saved. The respective setting appears on the display. Note: Without equaliser presets, you can adjust the bass and treble from -10 to +10. If you change the treble and/or bass while an equalizer presetting (POP M, ROCK M, CLASSICS, FLAT) is selected, the equaliser switches off automatically (DSP OFF).

05DaytonaLagunaMP28_cn.indd 96

2/15/08 2:58:07 PM

! ! AUX-IN Blaupunkt 001 535
05DaytonaLagunaMP28_cn.indd 97

2/15/08 2:58:08 PM

Blaupunkt Blaupunkt www.blaupunkt.com Blaupunkt
05DaytonaLagunaMP28_cn.indd 98

2/15/08 2:58:09 PM

www.blaupunkt.com Blaupunkt GmbH Hotline Robert-Bosch-Str. 200 D-31139 Hildesheim, Germany

Blaupunkt www.blaupunkt.com
05DaytonaLagunaMP28_cn.indd 99

2/15/08 2:58:10 PM

u CD

MENU 3 5

u ( 1) u ( 2) u ( 3) , CD AUX)
05DaytonaLagunaMP28_cn.indd 100

2/15/08 2:58:11 PM

u 5 u 5

u u

(MUTE)

u 6 MUTE u 6

05DaytonaLagunaMP28_cn.indd 101

2/15/08 2:58:12 PM

0 V 12 V u MENU 3 2 TEL u MUTE u ? HIGH/LOW/ OFF HIGH LOW OFF u MENU
u MENU 3 2 u BEEP u ? @ u ? @BEEP OFF u MENU
05DaytonaLagunaMP28_cn.indd 102

2/15/08 2:58:13 PM

EUROUSA ASIA USA ASIAEURO u MENU 3 u 2 AREA EUROAREA USAAREA ASIA u ? @ u MENU
FM AM FM FM1FM2 FMT AM 6 AM u MENU 3 2 AM u ONAM OFF u ? @ FM1FM2FMT AM u BAND >

u ? @ 2

CD AUX u SRC 4
05DaytonaLagunaMP28_cn.indd 103

2/15/08 2:58:14 PM

u ? @
() 6 FM FMT u TS 9 FM TSTORE FMT 1
u MENU 3 u 2 SENS HIGHSENS LOW u ? @ u MENU

u BAND > u 1 - 6 =

u FM1FM2 FMT AM u u 1 - 6 = 2
05DaytonaLagunaMP28_cn.indd 104

2/15/08 2:58:15 PM

12 CDCD-R CD-RW ! CD CD CD 8 CD CD CD CD CD CD Blaupunkt CD CD MP3WMA CD MP3WMA
u CD CD CD CD u CD CD 6 CD u SRC 4 CD

u ? @ @

CD 1 u

u ? @

05DaytonaLagunaMP28_cn.indd 105

2/15/08 2:58:16 PM

(MIX)
CD u 4 MIX = MIX MIX u 4 MIX = MIX

u ? @ u MENU

(REPEAT)
u 3 RPT = RPT u 3 RPT = RPT

(SCAN)

CD u 2 SCN = SCN SCAN SCAN u 2 SCN = SCN SCAN SCAN u MENU 3 u 2 SCAN

(PAUSE)

u 1 = PAUSE u 1 =
05DaytonaLagunaMP28_cn.indd 106

2/15/08 2:58:17 PM

MP3WMA

CLOCK ON CD u DIS

MP3 CD-R CD-RW WMA MP3 MP3 WMA DRM WMA
1 u u CD C CD u CD CD 10 CD

MP3 WMA CD

CD CD CD CD CD CD CD CD ISO /2 Joliet MP3 .MP3 MP3 MP3 CD MP3 MP3
05DaytonaLagunaMP28_cn.indd 107

2/15/08 2:58:18 PM

CD MP3 CD CD CD MP3 ID3 MP3 ID3 ID3
MP3 CD CD CD MP3 WMA CD MP3 MP3

u DIS 8 5

u 2

u ? @ @

MP3 CD CLOCK ON 9
05DaytonaLagunaMP28_cn.indd 108

2/15/08 2:58:19 PM

u MENU
u 3 RPT = RPT Repeat u 3 RPT = 2 RPT Repeat u 3 RPT = RPT

(SCAN)

CD u 2 SCN = SCN (SCAN) SCAN u 2 SCN = SCN SCAN SCAN u MENU 3 2 u SCAN u ? @

u 1 = PAUSE u 1 =

05DaytonaLagunaMP28_cn.indd 109

2/15/08 2:58:20 PM

u DIS
u MENU 1224 u MENU 3 u 2 HOUR 24HOUR 12 u ? @ u MENU u MENU 3 2 DEF u OFF ? @ DEF u LOAD u 5 MENU 3
u MENU 3 u 2 CLOCK ONCLOCK OFF CLOCK ON u MENU 3 u 2 ? @ u u 2 CLOCK ON
05DaytonaLagunaMP28_cn.indd 110

2/15/08 2:58:21 PM

/ AUX AUX u MENU 3 u 2AUX ONAUX OFF u ? @ AUX u MENU AUX AUX
-10 +10 u AUD : BAS u 5 -10 +10 u 5 POP M ROCK MCLASSICSFLAT presets

-10 +10

05DaytonaLagunaMP28_cn.indd 111

2/15/08 2:58:22 PM

u AUD : TRB u 5 -10 +10 u 5 POP M ROCK MCLASSICSFLAT presets

(fader)

fader u AUD : FAD u 5 10F 10R u 5

(X-BASS)

X-Bass X-Bass CDMP3 AUX / u X-BASS < LOUD ONLOUD OFF X-BASS

(balance)

(balance) u AUD : BAL u 5 10L 10R u 5
05DaytonaLagunaMP28_cn.indd 112

2/15/08 2:58:23 PM

(presets)
FL AT ( ) CLASSICS POP MROCK M AUD : u FL AT CL ASSICS POP MROCK MDSP OFF u 5 DSP OFF u 5 -10 +10 POP MROCK MCLASSICS FLAT/ DSP OFF
AUX CD MP3 AUX AUX Cinch AUX 3.5 AUX SRC 4 AUX AUX
05DaytonaLagunaMP28_cn.indd 113

2/15/08 2:58:24 PM

(Reset)

u B

4 x 22 DIN 45324, 14.4 @ x 40
FM AM FM 35 - 15,000 87.5 107.9 () ()

20 - 20,000

AUX-IN 150 /10 1.6
05DaytonaLagunaMP28_cn.indd 114

2/15/08 2:58:25 PM

(- ).
2 3 MENU . 4 SRC AUX . 5 6 / : . : . : . DIS . 9 TS . : AUD , , , . . ; AUX < X-BASS / = > BAND FM AM . @
: : . CD/MP3/WMA : . : : . CD/MP3/WMA : . : : . CD/MP3/WMA : : : . CD/MP3/WMA :

A CD B .

() CD .
D SRC/MENU () : , CD AUX . : . E BND/TS () : FM AM . : . F ()
06DaytonaLagunaMP28_KO.indd 115

2/15/08 2:39:23 PM

.. 118 . 118 . 118 .. 118 .. 119 . 119 !. 119 . 119 .. 119 . 120 .. 120 ... 120 .. 121 .. 121 . 121 .. 121 . 121 . 122 .. 122 /.. 123 / /.. 123 /.. 123 /.. 123 .. 123 ( ) . 123 (MUTE).. 123 . 124 /. 124

Mitgelieferte Montage- und Anschlussteile Supplied Mounting Hardware Materiel de montage fourni Componenti di ssaggio comprese nella fornitura Meegeleverde montagematerialen Medfljande monteringsdetaljer
Als Sonderzubehr erhltlich Available as an optional accessory Disponible en option Reperibili come accessori extra Als speciale accessoire verkrijgbaar Tillval Preamp./Sub./Center - out cable

001 512

Einbaustze Installation kits Kits de montage Set di montaggio Inbouwsets Monteringssatser

3. 0- 30

7 608.
B1_EA_MiSReMCarMP28.indd 160

Antenna

182 53
AUX IN only San Remo MP28 Monte Carlo MP28
B1_EA_MiSReMCarMP28.indd 161
Ausbau / Removal / Dmontage / Smontaggio / Demontage / Urmontering

C-1 C-2

10 Ampere
NC Radio Mute NC Permanent +12V NC NC Kl.15/Ignition Masse/GND 7 8
Speaker out RR+ Speaker out RR Speaker out RF+ Speaker out RF Speaker out LF+ Speaker out LF Speaker out LR+ Speaker out LR
Line Out LR Line Out RR Line Out / Ground NC NC NC 11 12
NC NC NC SW Supply - RC +12V Remote Control RC - GND 19 20

NC NC NC NC NC NC NC NC

Amplier
B1_EA_MiSReMCarMP28.indd 162
Preamp./Sub./Center - out cable 001 512

Kl. 15 +12V GND

Radio Mute

F LR RF L

+ + + + -

4 Ohm 4 Ohm 4 Ohm 4 Ohm

nderungen vorbehalten! Subject to changes! Sous rserve de modications! Modiche riservate! Wijzigingen voorbehouden! ndringar frbehlles!
B1_EA_MiSReMCarMP28.indd 163

04.02.2008 13:29:49 Uhr

2008 All rights reserved by Blaupunkt. This material may be reproduced, copied or distributed for personal use only. This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft.
B1_EA_MiSReMCarMP28.indd 164
Bitte den ausgefllten Gertepass sicher aufbewahren! Please keep the lled-in radio pass in a safe place! Prire de conserver soigneusement la carte dautoradio remplie ! Tenete per favore il libretto di apparecchio, debitamente riempito, in un posto sicuro! Bewaar de ingevulde apparaatpas op een veilige plaats! Vnligen frvara ifyllt apparatpass p sker plats!
B1_EA_MiSReMCarMP28.indd 165

Country:

Germany Austria Belgium Denmark Finland France Great Britain Greece Ireland Italy Luxembourg Netherlands Norway Portugal Spain Sweden Switzerland Czech. Rep. Hungary Poland Turkey USA Brasil (Mercosur) Malaysia (Asia Pacic) (D) (A) (B) (DK) (FIN) (F) (GB) (GR) (IRL) (I) (L) (NL) (N) (P) (E) (S) (CH) (CZ) (H) (PL) (TR) (USA) (BR)