RadioCD

Kiel CD36 Malaga CD36

065 510

Operating instructions

http://www.blaupunkt.com

01Kiel_MalagaCD36 d

15.02.2006, 11:52 Uhr

CONTROLS

DEUTSCH

Button to switch the device on/ off and operate the volume mute function. SRC button Short press: Switch sources between CD, CD changer (if connected) and AUX. Long press: Briefly display the clock time. button to eject a CD from the device. Volume control CD compartment TRAF RDS button Short press: Switch traffic-information standby on/off. Long press: Switch the RDS function on/off. Arrow buttons MENU button Short press: Open the settings menu. Long press: Start the scan function. AUDIO button to adjust the bass, treble, balance and fader. To select an equalizer preset. To activate, deactivate and adjust the X-BASS function. Keys 1 - 6

02Kiel_MalagaCD36 gb

15.02.2006, 11:59 Uhr

PORTUGUS

ESPAOL

SVENSKA

NEDERLANDS

ITALIANO

FRANAIS

ENGLISH

BNDTS button Short press: Select the FM memory banks and the MW and LW wavebands (MW/LW only on the Malaga CD36). Long press: Start the Travelstore function.

CONTENTS

Notes and accessories. 27 Switching on/off. 28 Adjusting the volume. 29
Setting the power-on volume. 29 Quick volume reduction (mute). 30 Switching the confirmation beep on/off.. 30 Mute while telephoning. 30 Traffic announcements in CD mode.. 38 Ejecting a CD.. 39

CD-changer mode. 39

Switching to CD-changer mode. 39 Selecting CDs.. 39 Selecting tracks.. 39 Fast searching (audible).. 39 Configuring the display. 40 Repeating individual tracks or whole CDs (REPEAT). 40 Random track play (MIX). 40 Scanning all the tracks on all the CDs (SCAN). 40 Pausing playback (PAUSE).. 41

Radio mode.. 31

Adjusting the tuner settings.. 31 Switching to radio mode. 31 RDS functions.. 31 Selecting the waveband / memory bank. 32 Tuning into a station. 32 Setting the sensitivity of station seek tuning.. 32 Storing stations.. 33 Storing stations automatically (Travelstore).. 33 Listening to stored stations.. 33 Scanning receivable stations (SCAN).. 33 Setting the scanning time. 34 Programme type (PTY). 34 Optimising radio reception. 35 Configuring the display. 35

CLOCK time. 41

Displaying the clock time. 41 Setting the clock time. 41 Selecting 12/24-hour clock mode. 41 Displaying the time continuously when the device is off and the ignition is on.. 42 Briefly displaying the time when the device is switched off. 42

Sound. 42

Adjusting the bass.. 42 Adjusting the treble.. 42 Setting the left/right volume distribution (balance).. 43 Adjusting the front/rear volume distribution (fader). 43 Equalizer presets.. 43
Traffic information. 36 CD mode. 37
Switching to CD mode.. 37 Selecting tracks.. 37 Fast track selection.. 37 Fast searching (audible).. 37 Random track play (MIX). 37 Scanning tracks (SCAN). 38 Repeating tracks (REPEAT). 38 Pausing playback (PAUSE).. 38 Configuring the display. 38 26
X-BASS.. 44 Configuring the level display. 44 External audio sources. 45 Specifications.. 45

NOTES AND ACCESSORIES

Thank you for choosing a Blaupunkt product. We hope you enjoy using this new piece of equipment. Please read these operating instructions before using the equipment for the first time. The Blaupunkt editors are constantly working on making the operating instructions clearer and easier to understand. However, if you still have any questions on how to operate the device, please contact your dealer or the telephone hotline for your country. You will find the telephone number printed at the back of this booklet. We provide a manufacturer guarantee on our products bought within the European Union. You can view the guarantee conditions at www.blaupunkt.de or ask for them directly at: Blaupunkt GmbH Hotline Robert Bosch Str. 200 D-31139 Hildesheim Gerrmany Road safety has absolute priority. Only operate your car sound system if the road and traffic conditions allow you to do so. Familiarise yourself with the device before setting off on your journey. You must always be able to hear police, fire service and ambulance sirens in good time from inside your vehicle. For this reason, listen to your car sound system at a moderate volume level during your journey.

DEUTSCH DANSK PORTUGUS ESPAOL SVENSKA NEDERLANDS ITALIANO FRANAIS ENGLISH

Notes and accessories

Road safety

Installation

If you want to install your car sound system yourself, please read the installation and connection instructions that follow these operating instructions.

Optional equipment

(not part of the scope of delivery) Use only accessories approved by Blaupunkt. Remote control The steering wheel and/or handheld remote control allows you to access the most important functions of your car sound system safely and conveniently. You cannot switch the device on/off using the remote control. You can find out from your Blaupunkt dealer or on the Internet at www. blaupunkt.com which remote controls can be used with your car sound system. 27

Disposal of old unit

(EU countries only) Do not dispose of your old device in the household trash! Use the return and collection systems available to dispose of the old device.

ACCESSORIES

Amplifiers You can use all Blaupunkt and Velocity amplifiers. CD changers You can connect the following Blaupunkt CD changers: CDC A 08, IDC A 09 and CDC A 03.

SWITCHING ON/OFF

Switching on/off
You can switch the device on/off in the following ways: Switching on/off using the vehicle ignition If the device is correctly connected to the vehicles ignition and it was not switched off using button 1, it will switch on/off simultaneously with the ignition. Switching on/off using button 1
To switch on the device, press
button 1. hold down button 1 for longer than two seconds. The device switches off.
To switch off the device, press and
Note: G To protect the vehicle battery, the device will switch off automatically after one hour if the ignition is off. Switching on by inserting a CD If the device is switched off and there is no CD present in the drive, gently push the CD with its printed side uppermost into the drive 5 until you feel some resistance. The drive draws in the CD automatically. You must not hinder or assist the drive as it draws in the CD. The device switches on and starts playing the CD.
Note: G If the vehicle ignition was switched off before you inserted the CD, you will first have to switch on the device by pressing button 1 in order to start playing the CD.

ADJUSTING THE VOLUME

You can adjust the volume in steps from 0 (off) to 66 (maximum). To increase the volume,

Adjusting the volume

turn the volume control 4 clockwise. To decrease the volume,
turn the volume control 4 anticlockwise.
Setting the power-on volume
Note: G The device is equipped with a timeout function. If, for instance, you press the MENU button 8 and select a menu item, the device will switch back approx. 8 seconds after the last button was pressed. Any changes to the settings that you have made will be saved. You can set the power-on volume. Press the MENU button 8. Press the or button 7 repeatedly until ON VOLUME appears in the display. Adjust the power-on volume using buttons 7. the To help you adjust the setting more easily, the device will increase or decrease the volume as you make your changes. If you change the setting to LAST VOL, the volume level that was set the last time you switched off the device will be activated again.
Note: G To protect your hearing, the power-on volume is limited to a value of 38. If the volume level was higher than this when the device was last switched off and the LAST VOL setting is activated, the system will reset the volume to 38 when you switch the device on again. When you have finished adjusting the setting,
Switching the confirmation beep on/off
The system will play a confirmation beep for some functions if you keep a button pressed down for longer than two seconds, for instance, when you assign a radio station to a station button. You can switch the beep on/off.
Press the MENU button 8. Press the or button 7 repeatedly until BEEP ON or BEEP OFF appears in the display. buttons 7. OFF means the beep is switched off and ON means the beep is switched on. When you have finished adjusting the setting,
press the MENU button 8 twice. Quick volume reduction (mute)
You can quickly decrease the volume (mute) to a level preset by you.
Adjust the beep setting using the

Briefly press button 1.

MUTE appears in the display. Cancelling mute To return to your previously set volume level,
press the MENU button 8. Mute while telephoning
If your device is connected to a mobile telephone, the car radios volume will be muted as soon as you pick up the telephone. This requires that the mobile telephone be connected to the device as described in the installation instructions. PHONE appears in the display.
briefly press button 1 again.
Setting the mute level You can adjust the mute level.
Press the MENU button 8. Press the or button 7 repeatedly until MUTE LVL appears in the display.
Adjust the mute level using the
buttons 7. When you have finished adjusting the setting,
press the MENU button 8 twice.

RADIO MODE

This device is equipped with an RDS radio receiver. Many of the receivable FM stations broadcast a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). The station name appears in the display as soon as the tuner receives it. If you are in CD, CD-changer or AUX mode, press the BNDTS button ; or press the SRC button 2 repeatedly until the memory bank (e.g. FM1) appears in the display.

Radio mode

Switching to radio mode
Adjusting the tuner settings
To ensure that the tuner works properly, the device must be configured for the region in which you are using it. You can choose between Europe (EUROPE), United States (USA), South America (S-AMERICA) and Thailand (THAI). By default, the tuner is set to the region in which the device was sold. If you encounter problems with radio reception, please check this setting. The radio functions described in these operating instructions refer to the EUROPE tuner setting. Press and hold down the 1 and 5 buttons : simultaneously and switch on the device again by pressing button 1. TUNER is displayed. Select your tuner region using the or button 7. To save the setting, switch the device off and on again or wait approx. 8 seconds. The car sound system starts with the last setting activated (radio, CD, CD changer or AUX).

RDS functions

The convenient RDS functions AF (Alternative Frequency) and REGIONAL extend your radios range of functions. G AF: If the RDS function is activated, the radio automatically tunes into the best receivable frequency for the station that is currently set. G REGIONAL: At certain times, some radio stations divide their programme into regional programmes providing different content. You can use the REG function to prevent the car radio from switching to alternative frequencies that are broadcasting different programme content.
Note: REGIONAL must be activated/deactivated separately in the menu. Switching the RDS function on/off
If you want to use the RDS functions (AF and REGIONAL), press and hold down the TRAF RDS button 6 for longer than two seconds. The RDS function is active when an RDS symbol lights up in the display. 31
Switching REGIONAL on/off Press the MENU button 8. Press the or button 7 repeatedly until REG appears in the display. OFF or ON is displayed alongside REG. To switch REGIONAL on/off, press the or button 7. Press the MENU button 8. Tuning into stations manually You can also tune into stations manually. Note: You can only tune into stations manually if the RDS function is deactivated. Press the or button 7.
Selecting the waveband / memory bank
This device can receive programmes broadcast over the FM frequency range as well as the MW and LW (AM) wavebands (MW and LW only on the Malaga CD36). There are three memory banks available for the FM waveband (FM1, FM2 and FMT) and one for each of the MW and LW wavebands. Six stations can be stored in each memory bank. To switch between the FM memory banks (FM1, FM2 and FMT) and the MW and LW wavebands, briefly press the BNDTS button ;.

Browsing through broadcasting networks (only FM) If radio stations provide several programmes, you have the option of browsing through their broadcasting networks. Note: The RDS function must be activated before you can use this feature. Press the or button 7 to switch to the next station on the broadcasting network.

Tuning into a station

There are various ways of tuning into a station. Automatic station seek tuning
Note: G When using this feature, you will only be able to switch to stations that you have received once before already. To receive the stations, use the scan function or the Travelstore function.
Setting the sensitivity of station seek tuning
You can choose whether the radio should only tune into stations providing good reception or whether it can also tune into those with a weak reception. Press the MENU button 8.

Press the

or button 7. The radio tunes into the next receivable station.
or button 7 repeatedly until SENS and the currently set value appear in the display. SENS HI6 means that the tuner is set to the highest sensitivity setting. SENS LO1 means it is set to the lowest sensitivity setting. Set the desired sensitivity using the buttons 7. When you have finished adjusting the setting, press the MENU button 8. Note: G You can set different sensitivity levels for FM and MW or LW (AM) (MW/LW only on the Malaga CD36).
Note: G Any stations previously stored in this memory bank are deleted in the process.
Press and hold down the BNDTS
button ; for longer than two seconds. The storing procedure begins. FM TSTORE appears in the display. After the process has completed, the radio will play the station that is stored in memory location 1 of the FMT memory bank.
Listening to stored stations Select the memory bank or waveband.
Press the station button 1 - 6 :
that corresponds to the station that you want to listen to.

Storing stations

Storing stations manually Select the memory bank that you want (FM1, FM2, FMT) or one of the wavebands (MW or LW) (MW/ LW only on the Malaga CD36). Tune into the station that you want. Press and hold down one of the station buttons 1 - 6 : for longer than two seconds to assign the station to that button.
Scanning receivable stations (SCAN)
You can use the scan function to listen to all the receivable stations briefly. You can set the scanning time in the menu to between 5 and 30 seconds (in steps of 5 seconds). Starting SCAN
Press and hold down the MENU
Storing stations automatically (Travelstore)
You can automatically store the six stations providing the best reception in the region (only FM). The stations are stored in the FMT memory bank.
button 8 for longer than two seconds. Scanning begins. SCAN appears briefly in the display followed by a flashing display of the current station name or frequency.

Cancelling SCAN and continuing listening to a station PTY-EON If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type. Note: G If the tuner does not find a station that matches the selected programme type, you will hear a beep and NO PTY appears briefly in the display. The radio will then retune to the station that it received last. G If the tuned radio station or another station on the broadcasting network broadcasts your selected programme type at a later point in time, the radio will automatically switch from the currently tuned station or from CD mode or CDchanger mode to the station whose programme type matches the one you selected. G If you do not want this PTY EON switching, disable it in the menu with PTY OFF. First, press one of the SRC 2 or BNDTS buttons ;. Switching PTY on/off

Press the MENU button 8.

Scanning stops and the radio continues playing the station that it tuned into last.
Setting the scanning time Press the MENU button 8. Press the or button 7 repeatedly until SCAN TIME appears in the display. buttons 7. ing the When you have finished adjusting the setting,
Set the desired scanning time us-
Note: G The scanning time that you set is also used when scanning in CD mode and in CD-changer mode.

Programme type (PTY)

Besides transmitting the station name, some FM stations also provide information on the type of programme they are broadcasting. Your car radio can receive and display this information. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS You can use the PTY function to select stations of a particular programme type. 34
Press the MENU button 8. Press the or button 7 repeatedly until PTY ON or PTY OFF appears in the display.
or button 7 to switch PTY ON or OFF.
Selecting the PTY language You can select the language in which the programme types are displayed. The following are available: DEUTSCH, ENGLISH and FRANAIS. Press the MENU button 8. Press the or button 7 repeatedly until PTY LANG appears in the display. Set your preferred language using the buttons 7. When you have finished adjusting the setting, press the MENU button 8 twice. Selecting a programme type and starting seek tuning Press the or button 7. The current programme type appears in the display. If you want to select another programme type, you can do so by pressing the or button 7 whilst this display is visible. The selected programme type appears briefly in the display. Press the or button 7 to start seek tuning. The radio will then tune into the next station it finds that matches your selected programme type.
FM). If interference occurs, the interference level is cut automatically. Switching HICUT on/off
Press the MENU button 8. Press the or button 7 repeatedly until HICUT appears in the display. Press the or button 7 to adjust the HICUT setting. HICUT 0 means that the interference level will not be cut automatically. HICUT 1 means that it will be cut automatically.

Press the MENU button 8. Configuring the display
In radio mode you have the option of displaying the waveband together with the memory bank / memory location and the time or the station name / frequency of the current station. Select FREQUENCY to display the station name / frequency or select CLOCK to display the waveband together with the memory bank / memory location and the clock time. Press the MENU button 8. Press the or button 7 repeatedly until TUN DISP appears in the display. Press the or button 7 to switch between CLOCK and FREQUENCY.
Optimising radio reception
HICUT The HICUT function improves reception during poor radio reception (only
Press the MENU button 8 twice.

TRAFFIC INFORMATION

Traffic information
Your device is equipped with an RDSEON receiver. EON stands for Enhanced Other Network. Whenever a traffic announcement (TA) is broadcast, the system switches automatically from a station that does not provide traffic reports to the appropriate traffic information station within the broadcasting network that does. Once the traffic report has been played, the system will switch back to the programme you were listening to before. if you retune the radio from a traffic information station to a station that does not broadcast traffic information. If you hear the warning beep, you can either switch off traffic information priority or tune into a station that broadcasts traffic information.
Setting the volume for traffic announcements Press the MENU button 8. Press the or button 7 repeatedly until TA VOLUME appears in the display. buttons 7. When you have finished adjusting the setting,
Switching traffic information priority on/off Briefly press the TRAF button
Adjust the volume using the
6. Traffic announcement priority is active when the traffic-jam symbol lights up in the display.
Notes: You can use the volume control 4 to adjust the volume during a traffic announcement for the duration of that announcement. G You can set the volume distribution for the traffic announcements. For further details, please read the Sound chapter.

Note: You will hear a warning beep: G if you leave the reception area of a traffic information station that you are currently listening to. G if you are receiving a traffic information station and the volume is set to minimum (0) or if, whilst listening to a CD, a CD in the changer or an AUX source, you leave the reception area of the tuned traffic information station and the subsequent automatic search cannot find a new traffic information station.

CD MODE

You can use this device to play standard audio CDs, CD-Rs and CD-RWs with a diameter of 12 or 8 cm. Risk of severe damage to the CD drive! Contoured CDs (shape CDs) are not suitable for playback in this unit. We do not accept responsibility for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. To ensure the system functions properly, only use CDs labelled with the compact disc logo. Problems might be experienced when playing copy-protected CDs. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs!

CD mode

If there is already a CD inserted in the drive, press the SRC button 2 repeatedly until CD appears in the display. Playback begins from the point at which it was last interrupted.
Selecting tracks Press one of the arrow buttons 7
to select the next or previous track. If you press the or button 7 once, the current track will be played again from the beginning.

Fast track selection

For fast track selection (backwards or forwards),

Switching to CD mode

If there is no CD inserted in the drive, Gently push the CD with its printed side uppermost into the drive 5 until you feel some resistance. The drive draws in the CD automatically. You must not assist or hinder the drive as it draws in the CD. The CD starts playing. Note: G If the vehicle ignition was switched off before you inserted the CD, you will first have to switch on the device by pressing button 1 in order to start playing the CD.
press and hold down one of the /
buttons 7 until fast-reverse / fast-forward track selection begins.

Fast searching (audible)

For fast searching (backwards or forwards),
press and hold down one of the
buttons 7 until fast searching backwards / forwards begins.
Random track play (MIX) Press the 5 MIX button :.
MIX CD appears briefly in the display and the MIX symbol lights up. The next randomly selected track will then be played.

Cancelling MIX

Press the 5 MIX button : again.
MIX OFF appears briefly in the display and the MIX symbol disappears.
RPT OFF appears briefly in the display and the RPT symbol disappears. Normal playback is then resumed.

Scanning tracks (SCAN)

You can scan (briefly play) all the tracks on the CD. button 8 for longer than two seconds. The next track will then be scanned. Note: G You can set the scanning time. For further details, please read the section entitled Setting the scanning time in the Radio mode chapter. Cancelling SCAN and continuing listening to a track MENU button 8. The currently scanned track will then continue to be played normally.
Pausing playback (PAUSE) Press button 3 :.
PAUSE appears in the display. Cancelling pause

Press button 3

: whilst pause is activated. Playback is resumed.

Configuring the display

You can choose between two display types for CD mode: G Track number and clock time G Track number and playing time
Press the MENU button 8. Press the or button 7 repeatedly until CD DISP appears in the display.
To cancel scanning, press the
or button 7 to switch between PLAY TIME and CLOCK.
Repeating tracks (REPEAT)
If you want to repeat a track,
Press the MENU button 8 twice. Traffic announcements in CD mode
If you wish to receive traffic announcements whilst CD mode is activated,
press the 4 RPT button :.
RPT TRCK appears briefly in the display and the RPT symbol lights up. The track is repeated continuously until you deactivate RPT. Cancelling REPEAT If you want to cancel the repeat function,

press the TRAF button 6.

Traffic announcement priority is active when the traffic-jam symbol lights up in the display. For further details, please read the Traffic information reception chapter.
press the 4 RPT button : again.
Ejecting a CD Press the eject button 3 next to
the CD compartment. The CD is ejected.

CD-CHANGER MODE

Note: G Information on handling CDs, inserting CDs and operating the CD changer can be found in the operating instructions supplied with your CD changer.

CD-changer mode

Remove the CD.
Note: G If a CD is ejected, the drive will automatically draw it back in again after approx. 10 seconds. G You can also eject CDs whilst the device is switched off or whilst another audio source is activated.
Switching to CD-changer mode Press the SRC button 2 repeatedly until CHANGER appears in the display. The device starts playing the first CD that the CD changer detects.

Selecting CDs

To move up or down to another CD,

press the

or button 7 once or several times.
Note: The device will ignore empty CD slots in the changer and slots containing invalid CDs.

Selecting tracks

To move up or down to another track on the current CD,
There are five display options available for CD-changer mode: G Track number and playing time (TRCK-TIME) G Track number and clock time (TRCK-CLK) G CD number and track number (CD-TRCK) G CD number and clock time (CD-CLK) G CD number and playing time (CD-TIME) Cancelling REPEAT To stop the current track or current CD from being repeated,
briefly press the 4 RPT button :.
RPT OFF appears and RPT disappears from the display.

Random track play (MIX)

To play the tracks on the current CD in random order,
briefly press the 5 MIX button :.
MIX CD appears briefly and MIX lights up in the display. To play the tracks on all the inserted CDs in random order, press and hold down the 5 MIX button : for longer than two seconds. MIX ALL appears briefly and MIX lights up in the display. Cancelling MIX
Press the MENU button 8. Press the or button 7 repeatedly until CDC DISP appears in the display.
or button 7 repeatedly until the option that you want is displayed.
Press the MENU button 8 twice. Repeating individual tracks or whole CDs (REPEAT)
To repeat the current track,
Briefly press the 5 MIX button :.
MIX OFF appears and MIX disappears from the display.
RPT TRCK appears briefly and RPT lights up in the display. To repeat the current CD, button : for longer than two seconds. RPT DISC appears briefly and RPT lights up in the display.
Scanning all the tracks on all the CDs (SCAN)
To scan (briefly play) all the tracks on all the inserted CDs in ascending order, press and hold down the MENU button 8 for longer than two seconds. TRK SCAN appears in the display and the number of the current track flashes.
press and hold down the 4 RPT
Cancelling SCAN To stop scanning, briefly press the MENU button 8. The currently scanned track will then continue to be played normally. Note: G You can set the scanning time. For further details, please read the section entitled Setting the scanning time in the Radio mode chapter.

CLOCK TIME

Displaying the clock time
To display the clock time briefly,

CLOCK time

button 2 until the clock time appears in the display.
Setting the clock time press the MENU button 8. Press the or button 7 repeatedly until CLOCK SET appears in the display.

To set the clock time,

button 7.
buttons 7. Once the hours are set,
Adjust the hours using the /

The minutes flash.

Adjust the minutes using the /

buttons 7.

MENU appears in the display.

Press the Press the

or button 7 to switch between the modes. 41
or button 7 repeatedly until 24 H MODE or 12 H MODE appears in the display.
Selecting 12/24-hour clock mode Press the MENU button 8.
The clock time appears in the display. The hours flash and can be adjusted.
Press and hold down the SRC
When you have finished adjusting the setting,
You can adjust the sound settings (bass and treble) separately for each source (radio, CD and CD changer / AUX). The volume distribution settings (balance and fader) apply to all the audio sources (except for traffic announcements). You can only adjust the balance and fader settings for traffic announcements whilst a traffic announcement is actually being played.
press the MENU button 8. Displaying the time continuously when the device is off and the ignition is on
To display the time when the device is off and the vehicle ignition is on,

press the MENU button 8.

or button 7 repeatedly until CLOCK OFF or CLOCK ON appears in the display.
or button 7 to switch between the ON/OFF settings. When you have finished adjusting the setting,
Adjusting the bass Press the AUDIO button 9.
BASS appears in the display. or button 7 to adjust the bass. When you have finished adjusting the setting,
press the MENU button 8. Briefly displaying the time when the device is switched off
To display the time briefly when the device is off,
press the AUDIO button 9. Adjusting the treble Press the AUDIO button 9.
BASS appears in the display.

press the SRC

button 2.
The time is displayed for eight seconds.
button 7 repeatedly until TREBLE appears in the display.
or button 7 to adjust the treble. When you have finished adjusting the setting,
press the AUDIO button 9.
This device is equipped with an equalizer that has been preset with settings for the ROCK, POP and CLASSIC music styles. To select an equalizer preset,
Setting the left/right volume distribution (balance)
To adjust the left/right volume distribution (balance),

Equalizer presets

button 7 repeatedly until BAL appears in the display.

or button 7 to adjust the balance (right/left). When you have finished adjusting the setting,
button 7 repeatedly until POP, ROCK, CLASSIC or EQ OFF appears in the display.
press the AUDIO button 9. Adjusting the front/rear volume distribution (fader)
To adjust the front/rear volume distribution (fader),
or button 7 to select one of the presets or select EQ OFF to switch off the equalizer. If you select one of the presets, it is shown continuously in the display. When you have finished adjusting the setting,
button 7 repeatedly until FADER appears in the display.
or button 7 to adjust the fader (front/rear). When you have finished adjusting the setting,

X-BASS

You can use the X-Bass feature to boost the bass at low volume levels. The selected X-Bass setting affects all the audio sources (radio, CD, CD changer or AUX). You can set the X-BASS boost in steps ranging from 1 to 3. XBASS OFF means that the X-BASS function is switched off. Adjusting the X-BASS boost

LEVEL DISPLAY

Configuring the level display
The level display temporarily provides you with a symbolic representation of the volume and audio settings whilst you are adjusting them. When you are not changing any settings, the level display depicts the peak music/speech output. You can switch the level display on/off.
Press the AUDIO button 9.
button 7 repeatedly until XBASS appears in the display together with the current setting.
or button 7 repeatedly until PEAK LVL appears in the display.
or button 7 repeatedly until the setting that you want appears in the display. When you have finished adjusting the setting,
or button 7 to switch between PEAK ON and PEAK OFF. When you have finished adjusting the setting,

EXTERNAL AUDIO SOURCES

External audio sources
Instead of connecting a CD changer, you can connect another audio source equipped with a line output. Audio sources can, for example, be portable CD players, MiniDisc players or MP3 players. If you want to connect an external audio source, you will need an adapter cable. You can obtain this cable (Blaupunkt no.: 897 093) from your authorised Blaupunkt dealer. Note: G If no CD changer is connected, the AUX input must be activated in the menu.

SPECIFICATIONS

Specifications

Amplifier

Output power: 4 x 25 watts sine in accordance with DIN at 14.4 V 4 x 45 watts max. power
Wavebands in Europe: FM : 87.5 - 108 MHz MW : 531 - kHz LW : 153 - 279 kHz FM frequency response: 35 - 16,000 Hz
Switching the AUX input on/off Press the MENU button 8.
Frequency response: 20 - 20,000 Hz
or button 7 repeatedly until AUX OFF or AUX ON appears in the display.
or button 7 to switch AUX on/off. When you have finished adjusting the setting,

Pre-amp out

4 channels: 2V

Input sensitivity

AUX input: 2 V / 6 k 1.33 kg
Note: G If the AUX input is activated, you can select it by pressing the SRC button 2. AUX INPUT then appears in the display.

Weight:

Subject to changes! 45
Bitte den ausgefllten Gertepass sicher aufbewahren! Please keep the filled-in radio pass in a safe place! Prire de conserver soigneusement la carte dautoradio remplie ! Tenete per favore il libretto di apparecchio, debitamente riempito, in un posto sicuro! Bewaar de ingevulde apparaatpas op een veilige plaats! Vnligen frvara ifyllt apparatpass p sker plats! Favor guardar el documento del aparato debidamente llenado en un lugar seguro! Por favor, guardar o carto preenchido do aparelho num lugar seguro! Det udfyldte apparatpas opbevares et sikkert sted!

EA Kiel_MalagaMP36

15.02.2006, 12:13 Uhr
Country: Germany Austria Belgium Denmark Finland France Great Britain Greece Ireland Italy Luxembourg Netherlands Norway Portugal Spain Sweden Switzerland Czech. Rep. Hungary Poland Turkey USA Brasil (Mercosur) Malaysia (Asia Pacific) (D) (A) (B) (DK) (FIN) (F) (GB) (GR) (IRL) (I) (L) (NL) (N) (P) (E) (S) (CH) (CZ) (H) (PL) (TR) (USA) (BR)
Phone: 0180-5000225 01-0 02-360 09-01-01-01-700 02-1010 66-08-7501850 01-8471644 02-803 0800-118922 0212-71 800-950-7045446
Fax: 05121-01-391 02-44-09-01-01-01-706 02-1040 66-4078 08-7501810 01-8471650 02-809 022-8771260 0212-40 708-6817188 +55-2773 +604-6413 640
WWW: http://www.blaupunkt.com

(MAL) +604-6382 474

Gertepass

Name: Typ: Serien-Nr.:

... 7 646.. BP...
Blaupunkt GmbH, Robert-Bosch-Strae 200, D-31139 Hildesheim
02/06 - CM-AS/SCS (dt, gb, fr, it, nl, sw, es, pt, dk)

8622404871

NEDERLANDS

ITALIANO

FRANAIS

ENGLISH

DEUTSCH
Country: Germany Austria Belgium Denmark Finland France Great Britain Greece Ireland Italy Luxembourg Netherlands Norway Portugal Spain Sweden Switzerland Czech. Rep. Hungary Poland Turkey USA Brasil (Mercosur) Malaysia (Asia Pacific) (D) (A) (B) (DK) (FIN) (F) (GB) (GR) (IRL) (I) (L) (NL) (N) (P) (E) (S) (CH) (CZ) (H) (PL) (TR) (USA) (BR)
Phone: 0180-5000225 01-0 02-360 09-01-01-01-700 02-1010 66-08-7501850 01-8471644 02-803 0800-118922 0212-71 800-950-7045446
Fax: 05121-01-391 02-44-09-01-01-01-706 02-1040 66-4078 08-7501810 01-8471650 02-809 022-8771260 0212-40 708-6817188 +55-2773 +604-6413 640
WWW: http://www.blaupunkt.com

(MAL) +604-6382 474

Gertepass

Name: Typ: Serien-Nr.:

... 7 646.. BP...
Blaupunkt GmbH, Robert-Bosch-Strae 200, D-31139 Hildesheim
02/06 - CM-AS/SCS (dt, gb, fr, it, nl, sw, es, pt, dk)

8622404871