Radio / CD

Miami Beach CD52
Operating and installation instructions

http://www.blaupunkt.com

Open here Ouvrir s.v.p. Por favor, abrir Favor abrir 2
PORTUGUS ESPAOL FRANAIS ENGLISH

CONTROLS

9 : button to unlock the removable control panel (release panel) Volume control Button switches the unit on/off, volume mute FM button selects the radio mode source, selects the FM memory levels AM button selects the radio mode source, selects the AM frequency range Display button displays the time, DIS changes the display content MENU button opens the basic settings menu button opens the fliprelease panel Arrow buttons ; < = > ? @ OK button confirms menu entries and starts the scan function X-BASS button to set the X-Bass feature AUDIO button (audio) adjusts the bass, treble, balance and fader Keys 1 - 6 TS button starts the Travelstore function SRC button to switch between CD, CD changer (if connected) and AUX sources

TABLE OF CONTENTS

Road safety.. 6 Installation.. 6 Accessories. 6 International telephone information. 6
ENGLISH PORTUGUS ESPAOL FRANAIS

Notes and accessories. 6

Changing the display. 15 Ejecting a CD.. 15

CD changer mode. 15

Switching to CD changer mode.. 15 Selecting a CD.. 15 Selecting tracks.. 15 Quick track selection. 15 Fast searching (audible). 15 Changing the display. 16 Repeating individual tracks or whole CDs (REPEAT).. 16 Random play (MIX). 16 Scanning all tracks on all CDs (SCAN)... 16 Pausing playback (PAUSE). 17
Removable control panel. 7 Switching on/off.. 8 Adjusting the volume.. 9
Setting the power-on volume. 9 Instantaneous volume reduction (mute).. 9 Telephone audio / navigation audio. 9 Setting the volume of the confirmation beep. 10

Radio mode.. 11

Switching to radio mode. 11 Selecting the frequency range / memory... 11 Tuning into a station.. 11 Storing stations.. 11 Storing stations automatically (Travelstore).. 12 Listening to preset stations. 12 Scanning receivable stations (SCAN)... 12 Setting the scantime.. 12 Tuner configuration. 12 Setting the display.. 13
CLOCK - Time. 17 Sound and volume distribution settings.. 19
Adjusting the bass settings. 19 Adjusting the treble settings. 19 Setting the left/right volume distribution (balance). 19 Setting the front/back volume distribution (fader).. 19

CD mode.. 13

Switching to CD mode. 13 Selecting tracks.. 14 Quick track selection. 14 Fast searching (audible). 14 Random play (MIX). 14 Scanning tracks (SCAN).. 14 Repeating tracks (REPEAT). 14 Pausing playback (PAUSE). 14
X-BASS.. 20 Setting the spectrometer. 20 External audio sources.. 21 Specifications. 21 Installation instructions.. 78

NOTES AND ACCESSORIES

Thank you for deciding to purchase a Blaupunkt product. We hope you enjoy using this new piece of equipment. Before using the device for the first time, please read these instructions carefully. The Blaupunkt editors are constantly working on making the operating instructions clearer and easier to understand. However, if you still have any questions on how to operate the unit please contact your dealer or the telephone hotline for your country. You will find the hotline telephone numbers printed at the back of this booklet.

Accessories

Only use accessories approved by Blaupunkt. Remote control The optional RC08 or RC10 remote controls allow you to safely and conveniently access the most important functions of your car radio from your steering wheel. Amplifier All Blaupunkt amplifiers can be used. CD changer You can connect the following Blaupunkt CD changers: CDC A 06, CDC A 08, CDC A 072, IDC A 09 and CDC A 02. You can also connect the CDC A 05 and CDC A 071 CD changers by using an adapter cable (Blaupunkt no.: 889 093).

Road safety

Road safety has absolute priority. Only operate your car radio if the road and traffic conditions allow you to do so. Familiarise yourself with the unit before setting off on your journey. You should always be able to hear police, fire and ambulance sirens from afar. For this reason, set the volume of whatever you are listening to to a reasonable level.
International telephone information
If you have any questions regarding the operation of your car radio or if you require further information, please do not hesitate to call us! The information hotline numbers are printed on the last page of these instructions.

Installation

If you want to install your car radio yourself, please read the installation and connection instructions that follow these operating instructions.

REMOVABLE CONTROL PANEL

Theft protection
As a way of protecting your car radio against theft, the unit is equipped with a removable control panel (flip-release panel). Without this control panel, the car radio is worthless to a thief. Protect your car radio against theft by taking the control panel with you every time you leave your vehicle. Do not leave the control panel in your vehicle not even in a hiding place. The control panel has been designed to be easy to use. Note: Never drop the control panel. Never expose the control panel to direct sunlight or other heat sources. Store the control panel in the supplied case. Avoid making direct skin contact with the control panels contacts. If necessary, clean the contacts with a lint-free cloth soaked in cleaning spirits. The control panel locking mechanism opens.

Removable control panel

Press the

button 1.

First, pull the control panel straight
off the unit and then out towards the left. The unit switches off after the control panel is removed. All the current settings are saved. Any CD already inserted in the unit remains there.
Attaching the control panel Slide the control panel from left to
right into the units panel locking mechanism.
Press the left-hand edge of the
control panel into the unit until it clicks into place.
Removing the control panel
Note: When attaching the control panel, make sure you do not press the display. If the unit was still switched on when you removed the control panel, the unit will automatically switch on with the last settings activated (i.e. radio, CD, CD changer, or AUX) when the panel is replaced.

SWITCHING ON/OFF

Switching on/off
There are various ways of switching the unit on/off: Switching on/off using the vehicle ignition If the unit is correctly connected to the vehicles ignition and it was not switched off using button 3, it will switch on/off simultaneously with the ignition. You can switch the unit on even if the ignition is off: Switching on by inserting a CD If the unit is switched off and there is no CD inserted in the drive,

press the

button 9.
The flip-release panel opens.
Gently insert the CD with the printed side uppermost into the drive until you feel some resistance. The CD will be drawn automatically into the drive. You must not hinder or assist the drive as it draws in the CD.

To do so, press button 3.
Note: To protect the vehicle battery, the unit will switch off automatically after one hour if the ignition is off. Switching on/off using the removable control panel
Gently close the control panel
whilst exerting a little pressure until you feel it click into place. The unit switches on. CD playback begins.
Remove the control panel.

The unit switches off.

Attach the control panel again.
The unit switches on. The last settings (radio, CD, CD changer or AUX) will be reactivated. Switching on/off using button 3
To switch the unit on, press button
To switch the unit off, press button
3 for longer than two seconds. The unit switches off.

ADJUSTING THE VOLUME

The volume can be adjusted in steps from 0 (off) to 66 (maximum).

Adjusting the volume

Instantaneous volume reduction (mute)
This feature allows you to instantaneously reduce (mute) the volume to a level preset by you.
To increase the volume, turn the
volume control 2 to the right.
To decrease the volume, turn the
volume control 2 to the left.

Briefly press button 3.

MUTE appears in the display. Setting the mute level You can set the units mute volume level.
Setting the power-on volume
You can set the units default power-on volume.
Press the MENU button 8. Keep pressing the or button
: until ON VOLUME appears in the display.
: until MUTE LEVEL appears in the display. and buttons :. When you have finished making your changes,
Set the power-on volume using the
and buttons :. If you change the setting to LAST VOL, the power-on volume will be the same as the volume level that was set before the unit was last switched off.
Set the mute level using the
press the MENU button 8 or OK

; twice.

Note: To protect your hearing, the poweron volume is limited to a value of 38 if you have chosen LAST VOL. If the volume level was higher when the unit was switched off, the volume will be reset to 38 when the unit is switched on again. When you have finished making your changes, ; twice.

Telephone audio / navigation audio
If your car radio is connected to a mobile telephone or a navigation system, the units volume will be muted as soon as you pick up the telephone or as soon as a navigation announcement is made. The caller or voice output will then be heard over the car radio loudspeakers. In order for this to work, the mobile telephone or navigation system must be connected to the car radio in the manner described in the installation instructions. For this, you need the Blaupunkt-cable 001 503. 9
You can find out from your Blaupunkt dealer which navigation systems can be used with your car radio. You can set the volume level at which telephone calls and the navigation voice output will first be heard. Press the MENU button 8. Keep pressing the or button : until TEL/NAVI VOL appears in the display. Set the required volume using the and buttons :. When you have finished making your changes, and buttons :. 0 means beep off, 9 means maximum beep volume. When you have finished making your changes,

Set the volume using the

; twice. Note: Using the volume control 2, you can directly adjust the volume of telephone calls and navigation voice output (whilst they are being heard).
Setting the volume of the confirmation beep
For some functions you will hear a confirmation beep if you keep a button pressed for longer than two seconds. For instance, after storing a radio station to a station button you will hear a confirmation beep. You can set the volume of this beep.
: until BEEP appears in the display.

RADIO MODE

Switching to radio mode
If you are in CD, CD changer or AUX mode,

Radio mode

press the FM 4 / AM 5 button
Setting the sensitivity for station seek tuning You can configure the radio to only tune into stations with a strong reception or to also tune into those with a weak reception.
keep pressing the SRC button @
until RADIO appears in the display.
: until SENS HI or SENS LO appears in the display. SENS HI means that the tuner is highly sensitive. SENS LO means it is set to the lowest sensitivity setting.
Selecting the frequency range / memory

This unit can receive programmes broadcast over the FM and AM frequency ranges. There are three preset memory levels for the FM range and one for the AM range. Six stations can be stored on each memory level. Selecting the FM memory level
Set the required sensitivity using
the and buttons :. When you have finished making your changes,
;. Tuning into stations manually You can also tune into stations manually.
Press the FM button 4 to switch
between the FM memory levels (FM1, FM2 and FMT). Selecting the AM frequency range

button :.

Press the AM button 5 to select

the AM frequency range.

Storing stations
Storing stations manually

Tuning into a station

There are various ways of tuning into a station. Automatic seek tuning
Select the required memory level
(FM1, FM2 or FMT) or the AM frequency range.
Tune into the station. Press one of the station buttons 16 > for longer than one second to store the station to that button.
The unit tunes into the next receivable station.
Storing stations automatically (Travelstore)
You can automatically store the six stations with the strongest reception in the region. The stations are stored in the FMT or AM memory depending on the selected frequency range. Note: Stations that were previously stored in this memory are deleted in the process. Stopping SCAN and continuing listening to a station

Press the OK button ;.

Scanning is stopped and the station that was tuned into last will remain active.
Setting the scantime Press the MENU button 8. Keep pressing the or button
: until SCANTIME appears in the display.
Briefly press the TS button ?.
The station storing procedure begins. TRAVEL-STORE appears in the display. After the process is completed, the station that is stored in location 1 of the respective memory level will be played.
Set the required scantime using
; twice. Note: The set scantime also applies to scanning in CD and CD changer mode.
Listening to preset stations Select the memory level on which

the station was stored.

Press the preset station button 1-6
> of the station you want to listen to.

Tuner configuration

This unit is equipped with a multiband tuner. The tuner can be configured to suit the requirements that are specific to various countries. The countries/regions available are: America, Europe, Asia and Thailand. The tuner will only function optimally if it is configured for the country/region in which the unit is being operated. Configuring the tuner

Scanning receivable stations (SCAN)
You can briefly play all the receivable stations. You can set the scanning time to between 5 and 30 seconds in the menu. Starting SCAN
Keep the OK button ; pressed
until the scan process starts. SCAN appears briefly in the display followed by the current frequency (which flashes). 12
: until FM TUNER appears in the display.
or button : to set the country/region. When you have finished making your changes,

CD MODE

You can use this unit to play standard audio CDs , CD-Rs and CD-RWs with a diameter of 5 inches. Risk of damage to the CD drive! CD singles with a diameter of 3 inches and contoured CDs (shape CDs) are not suitable for playback in this unit. We accept no liability for any damage to the CD drive that may occur as a result of the use of unsuitable CDs.

CD mode

; twice. Note: Once you have configured the tuner, the unit will switch to radio mode and tune into the preset frequency 87.5 MHz

Setting the display

In radio mode, you have the option of continuously displaying the time or continuously displaying the frequency.

Switching to CD mode

If there is no CD inserted in the drive, press the button 9. The flip-release panel opens. Gently insert the CD with the printed side uppermost into the drive until you feel some resistance. The CD is drawn into the drive automatically. You must not hinder or assist the drive as it draws in the CD. Gently close the control panel whilst exerting a little pressure until you feel it click into place. CD playback begins. If a CD is already inserted in the drive. Keep pressing the SRC button @ until CD appears in the display. Playback begins from the point at which it was last interrupted.

Keep the

/ DIS button 7 pressed until the required display appears.
Selecting tracks Press one of the arrow buttons :
to select the next or previous track. If you press the or button : once, the current track will be played again from the beginning. Note: You can set the scantime. For further details, please read the section entitled Setting the scantime in the Radio mode chapter. Stopping SCAN and continuing playback

Quick track selection

To quickly select tracks backwards or forwards,
To stop scanning, press the OK
button ;. The current track will then continue to be played.

keep one of the

or buttons : pressed until fast-reverse / fast-forward track selection begins.

Fast searching (audible)

To fast search backwards or forwards,
Repeating tracks (REPEAT) If you want to repeat a track, press
button 4 RPT >. REPEAT TRCK appears briefly in the display and the RPT symbol lights up. The track is repeated until you deactivate RPT. Cancelling repeat
buttons : pressed until fast reversing / fast forwarding begins.
Random play (MIX) Press button 5 MIX >.
MIX CD appears briefly in the display and the MIX symbol lights up. The next randomly selected track will then be played. Stopping MIX
If you want to stop the repeat function, press button 4 RPT > again. REPEAT OFF appears briefly in the display and the RPT symbol disappears. Normal playback is then continued.
Press button 5 MIX > again.
MIX OFF appears briefly in the display and the MIX symbol disappears.
Pausing playback (PAUSE) Press button 1 >.
PAUSE appears in the display. Cancelling pause > while in pause mode. Playback is continued.

Scanning tracks (SCAN)

You can briefly play all the tracks on a CD.

Press button 1

Press the OK button ; for longer
than two seconds. The next track will then be played briefly. 14
Changing the display To switch between the track number and clock display / track number and playing time display, press / DIS button 7 once or sevthe eral times for longer than two seconds until the required display appears.

CD CHANGER MODE

Note: Information on handling CDs, inserting CDs and operating the CD changer can be found in the operating instructions supplied with your CD changer.

CD changer mode

Ejecting a CD Press the button (9).
The flip-release panel opens and the CD is ejected.
Switching to CD changer mode Keep pressing the SRC button @
until CHANGER appears in the display. Playback begins with the first CD that the CD changer detects.
Remove the CD and close the control panel.
Selecting a CD To move up/down from one CD to
another, press the or button : once or several times.
Selecting tracks To move up/down from one track to
another on the current CD, press the or button : once or several times.
buttons : pressed until fast reversing / fast forwarding begins. 15
Changing the display To switch between the track number and clock display / track number and playing time display / CD number and track number display, / DIS button 7 once press the or several times for longer than two seconds until the required display appears. MIX ALL appears briefly and MIX lights up in the display. Note: In the case of the CDC A 08 and the IDC A 09, all the CDs in the changer are selected randomly. In the case of any other changer, all the tracks on one CD are played randomly before the next CD in the changer is played. Stopping MIX Press button 5 MIX > until MIX OFF appears briefly in the display and MIX disappears.

Repeating individual tracks or whole CDs (REPEAT) If you wish to repeat the current
track, briefly press button 4 RPT >. REPEAT TRCK appears briefly and RPT lights up in the display.
If you wish to repeat the current
CD, press button 4 RPT > again. REPEAT DISC appears briefly and RPT lights up in the display. Cancelling repeat
Scanning all tracks on all CDs (SCAN) To briefly play all the tracks on all
inserted CDs in ascending order, press the OK button ; for longer than two seconds. SCAN appears in the display. Stopping SCAN To stop scanning, briefly press the OK button ;. The current track will then continue to be played. Note: You can set the scantime. For further details, please read the section entitled Setting the scantime in the Radio mode chapter.
If you want to stop the repeat function for the current track or CD, press button 4 RPT > until REPEAT OFF appears briefly in the display and RPT disappears.
Random play (MIX) To play all the tracks on the current
CD in random order, briefly press button 5 MIX >. MIX CD appears briefly and MIX lights up in the display. To play the tracks on all the inserted CDs in random order, press button 5 MIX > again. 16

CLOCK - TIME

Briefly displaying the time To display the time, briefly press

the / DIS button 7.

ENGLISH

CLOCK - Time

Setting the time
Setting the time manually
To set the time, press the MENU Keep pressing the
or button : until CLOCKSET appears in the display. button :.

ESPAOL PORTUGUS

button 8.
The time appears in the display. The minutes flash on and off and can be adjusted.
Adjust the minutes using the

buttons :.

Once you have set the minutes,
press the button :. The hours start flashing.
Adjust the hours using the
Press the MENU button 8 or OK

FRANAIS

Selecting 12/24-hour clock mode Press the MENU button 8.
MENU appears in the display.

Briefly displaying the time when the unit is switched off
To briefly display the time when the unit is off,

Keep pressing the

or button : until 24 H MODE or 12 H MODE appears in the display.

/ DIS button 7.

The time is displayed for eight seconds.
or button : to switch between the modes. When you have finished making your changes,
Displaying the time continuously when the unit is off and the ignition is on
To display the time when the unit is off and the vehicle ignition is on,
press the MENU button 8. Keep pressing the or button
: until CLK DISP OFF or CLK DISP ON appears in the display. or button : to switch between the ON/OFF settings. When you have finished making your changes,
SOUND AND VOLUME DISTRIBUTION SETTINGS
Sound and volume distribution settings
You can adjust the sound distribution settings separately for each source (radio, CD, CD changer and AUX).
Setting the left/right volume distribution (balance) To set the left/right volume distribution (balance), press the AUDIO button =. BASS appears in the display.
Adjusting the bass settings Press the AUDIO button =.
BASS appears in the display. or button : to adjust the bass. When you have finished making your changes,
button : until BALANCE appears in the display.
or button : to adjust the balance (right/left). When you have finished making your changes,
press the AUDIO button =. Adjusting the treble settings Press the AUDIO button =.
BASS appears in the display.
press the AUDIO button =. Setting the front/back volume distribution (fader) To set the front/back volume distribution (fader), press the AUDIO button =. BASS appears in the display.
button : until TREBLE appears in the display.
or button : to adjust the treble. When you have finished making your changes,
Keep pressing the Press the
button : until FADER appears in the display.
press the AUDIO button =.
or button : to adjust the fader (front/back). When you have finished making your changes,

X-BASS

The X-BASS feature can be used to boost the bass at low volume levels.

SPECTROMETER

Setting the spectrometer
The spectrometer (level display) briefly provides a symbolic display of the volume and the audio control settings whilst you are adjusting them. When you are not changing any settings, the spectrometer displays the car radios output level. You can set the type of spectrometer in the menu. There are two types available.
Adjusting the X-BASS boost settings
The X-BASS boost can be set in steps from X-BASS OFF to X-BASS LOW to X-BASS HIGH.
Press the X-BASS button <. Keep pressing the or button

: until the required setting appears in the display. When you have finished making your changes,
Setting the spectrometer type Press the MENU button 8.
press the X-BASS button <.
Note: The X-BASS icon is lighted up when X-BASS LOW or X-BASS HIGH is selected.
or button : until EQ DISPLAY appears in the display.
or button : to select SPECTRUM 1, SPECTRUM 2 or EQ DISP OFF. When you have finished making your changes,

EXTERNAL AUDIO SOURCES

External audio sources
Instead of connecting a CD changer, you can connect another audio source equipped with a line output. The audio source, for example, can be a portable CD player, MiniDisc player or MP3 player. The AUX input must be activated in the menu. If you want to connect an external audio source, you will need an adapter cable. You can obtain this adapter cable (BP no.: 897 093) from your authorised Blaupunkt dealer.

SPECIFICATIONS

Amplifier
Output power: 4 x 25 watts sine in accordance with DIN at 14.4 V 4 x 50 watts max. power

Specifications

Frequency ranges US: FM: 87.5 107.9 MHz AM: kHz Frequency ranges Asia and Europe: FM: 87.MHz AM: kHz Frequency ranges Thailand: FM: 87.MHz AM: kHz FM mono sensitivity: 17 dbf FM frequency response: 35 - 16,000 Hz
Switching the AUX input on/off Press the MENU button 8.
or button : until AUX-IN-1 OFF or AUXIN-1 ON appears in the display.
or button : to switch AUX on/off. When you have finished making your changes,
;. Note: If the AUX input is switched on it can be selected by pressing the SRC button @.
Frequency response: 20 - 20,000 Hz

Pre-amp out

4 channels: 3V

Input sensitivity

AUX input: Tel./Navi input: 2 V / 6 k 10 V/ 1 k

Subject to changes! 21

Service numbers / Numros du service aprs-vente / Nmeros de servicio / Nmero de servio
Country: Germany Austria Belgium Denmark Finland France Great Britain Greece Ireland Italy Luxembourg Netherland Norway Portugal Spain Sweden Switzerland Czech. Rep. Hungary Poland Turkey USA Brasil (Mercosur) (D) (A) (B) (DK) (FIN) (F) (GB) (GR) (IRL) (I) (L) (NL) (N) (P) (E) (S) (CH) (CZ) (H) (PL) (TR) Phone: 0180-5000225 01-02-360 09-01-01-0800-01-4149400 02-023-66-01-902-120234 08-7501500 01-8471644 02-01-0800-118922 0212-3350677 Fax: 05121-01-91 02-44-09-01-01-01-01-4598830 02-023-66-01-916-467952 08-7501810 01-8471650 02-01-022-8771260 0212-3460040 708-6817188 WWW: http://www.blaupunkt.com

(USA) 800-2662528 (BR)

+55-2769 +55-2773 +604-6413 640
Malaysia (Asia Pacific) (MAL) +604-6382 474

Blaupunkt GmbH

01/02 CM/PSS 403 152

C6 Line Out LR Line Out RR Line Out Masse / Ground Line Out LF Line Out RF +12V Amplifier * C2 Telefon / Navi NF in + Telefon / Navi NF in Radio / Navi Mute FB +12V / RC +12V * Fernbedienung / Remote Control FB - Masse / RC - GND C3 Bus - In Bus - Out Permanent +12V +12V * Bus - Masse / GND AF - Masse / GND Line In - L Line In - R

Equalizer

Amplifier

Remote Control

Telefon NF in

CD-Changer

Sum Somme 400 mA EI Zumbid Zumbam

Sub Out

RR R LR F LF

+ + + + -

Relais

4 Ohm 4 Ohm 4 Ohm 4 Ohm

Kl. 15 +12V

Automatic Sound

Radio Mute (low)

**Sub Out

This information is subject to change without notice! Sous rserve de modifications! Modificaciones reservadas! Sob reserva de alteraes!