Radio / Cassette

Saint Tropez RCM 168 Ravenna RCM 168 Las Vegas DJ

Operating instructions

St.TropRavLasVegasDJ d 1 22.03.2001, 16:09 Uhr

PORTUGUS

ESPAOL

SVENSKA

NEDERLANDS

ITALIANO

FRANAIS

ENGLISH

DEUTSCH
Remote control RC 08 (optional)
St.TropRavLasVegasDJ d 2 22.03.2001, 16:10 Uhr

Display

The display consists of three fields and varies according to the operating mode and function.

Display field 1:

Radio mode Memory banks and wavebands Brief indication of preset station (e.g. P1) Cassette mode CAS - cassette inserted MTL - tape type Changer mode Current track Audio Numeric and graphic representation of volume and audio settings DSC Permanent display for DSC programming. Graphic representation of the adjusted volume level.

Display field 2:

Radio mode Radio frequency or station name PTY programme type Clock display Cassette mode TAPE1/TAPE2 - side of tape playing Active functions (e.g. CPS) Clock display Changer mode Current CD playing CD time (elapsed time), CD name, CD number and Brief indication of changes in function Clock display DSC Serves as display and input field during DSC programming Clock display Miscellaneous Indicates new source (e.g. when changing from radio to cassette) and active functions (e.g. BASS, SCAN)

Display field 3:

Active functions - Stereo - Cassette inserted - CD changer connected - Loudness
Radio mode AF - Alternative Frequency for RDS PTY - RDS programme type TA - Priority for traffic information TP - Traffic programme station lo - Seek tuning sensitivity Cassette mode RPT - Repeat function - Dolby noise reduction Changer mode RPT - Repeat function MIX - Tracks played at random
St.TropRavLasVegasDJ gb 26 22.03.2001, 16:11 Uhr
Display... 26 Quick reference.. 28
Remote control operation.. 32

Important notes.. 32

What you need to know.. 32 Traffic safety.. 32 Installation.. 32 Telephone mute.. 32 Warning note.. 32 Accessories... 33
Selecting the operating mode. 34 Radio operation with RDS.. 35
AF - Alternative frequency. 35 REG - regional programme.. 35 Selecting a waveband.. 35 Station tuning.. 35 Automatic seek tuning /. 35 Scrolling through the broadcast networks (FM only).. 36 Switching between the memory banks (FM).. 36 Storing stations. 36 Automatically storing the strongest stations with Travelstore.. 37
Traffic programme station reception with RDS-EON. 40
Traffic announcement priority on/off. 40 Warning beep.. 40 Switching the warning beep off. 40 Automatic seek tuning start.. 40 Adjusting the volume for traffic announcements and the warning beep. 40

Clock.. 45

Setting the clock.. 45 Setting the TIMER. 45

DSC programming.. 46

Overview of the DSC factory settings. 47
Cassette deck operation. 41
Cassette playback. 41 Reversing the tape.. 41 Skipping cassette titles. 41 Repeat song titles.. 41

Specifications.. 47

St.TropRavLasVegasDJ gb 27 22.03.2001, 16:11 Uhr
Theft protection. 33 Detaching the release panel. 33 Attaching the release panel.. 33 Fixing the release panel.. 34

Release panel.. 33

Recalling stored stations. 37 Scanning stored stations with Preset Scan... 37 Scanning stations with Radio Scan.. 37 Changing the scan time.. 37 Selecting the automatic tuning sensitivity.. 37 PTY - Programme Type.. 37 Programme types.. 38 Switching PTY ON/OFF. 38 Checking the programme type of the station.. 38 Displaying the selected programme type... 38 Selecting a programme type. 38 Storing programme types.. 39 Scanning stations with PTY SCAN. 39 PTY priority.. 39

Fast forward Fast rewind
Press the button indicating the opposite direction or / to stop tape winding. Changer mode Optional: Saint Tropez RCM 168, Ravenna RCM 168 Included: Las Vegas DJ Select CD Up Down Select track >> Up: press briefly CUE - fast forward (auible): hold button down. << Down: press two or more times briefly Repeat track: press once briefly. REVIEW - fast reverse (audible): hold button down.
Additional rocker switch functions: For additional settings use AUD ; DSC-MODE 4 PTY @ Important: The corresponding function must be active. : SRC (Source) Press button briefly to select the operating mode (tuner, cassette, changer). The active mode will appear in the display. ; AUD Treble and bass adjustment You can store different settings for the FM, MW, LW, cassette and CD mode. Setting the tone: Select the operating mode. Press AUD once and use the rocker switch to set the tone. Treble + Treble Bass Bass
For Fader and balance adjustment: press AUD twice. Fader front Fader rear Balance left Balance right

<< >>

Switching AUD off: Press the button again briefly. If you do not make any adjustments to the tone within 8 seconds, the AUD mode will quit automatically. Extra function: LD Loudness boosts the bass frequency at low volume. Loudness on/off: Press AUD for approx. 1 second. "LD" will appear when this setting is active. Refer to the section on DSC programming to adjust Loudness to different levels. < SCA Scan Scans radio stations or song titles/ tracks. You can set the scan time in DSC programming. 29

St.TropRavLasVegasDJ gb

22.03.2001, 16:11 Uhr
The selected values will appear in the display. The last setting is stored automatically.
Radio mode Press SCA briefly. All of the FM stations within reception range will be scanned. "SCAN" will appear in the display, alternating with the radio station currently being scanned (flashing). Preset Scan Press SCA for approx. 2 seconds until you hear a beep. "PS Scan" will appear in the display, followed by the station symbol (flashing). The stations stored on the station preset buttons and within reception range will be scanned. To stop Scan / Preset Scan: Press SCA again. PTY Scan PTY Scan cannot be started unless PTY is switched on ("PTY" will light up in the display.) The radio stations for the program type selected will be scanned. "PTY SCAN" will appear in the display, alternating with radio station currently being scanned. To stop Scan / PTY Scan: Press SCA again.
Cassette mode Press SCA briefly. All of the titles on the cassette will be scanned. To stop Scan: Press SCA again Changer mode Press SCA briefly. All of the CD tracks will be scanned. "SCAN" will appear in the display. To stop CD scan: Press SCA again. = DIS - Clock display Radio mode Press this button briefly and the time will appear in the display for a short while. Changer mode Press this button to switch the display between the CD Name, CD number, playback time indication and clock. Cassette mode Press this button to switch the display between the time and the cassette track (TAPE 1/TAPE 2).

> Preset buttons 1 to 6 Radio mode You can store six stations in each FM memory bank (1, 2, and "T"). On MW and LW you can also store six stations each. Store station - Hold down a preset button in radio mode until you hear a beep. Recall station - Select a waveband and the memory bank on FM as well; press the corresponding preset button briefly. Cassette mode 1/MTL Selects between chrome or iron oxide tape types. Press 1/MTL. 2/ - Dolby Reduces excess noise when playing tapes recorded using the DOLBY B system. 3/ - Pause Interrupts tape playback. "PAUSE" will appear in the display. Press this button once again to resume playback.
St.TropRavLasVegasDJ gb 30 22.03.2001, 16:11 Uhr
4/RPT Repeats song titles. "REPEAT-T" will appear briefly in the display. RPT will light up in the display and the title will repeat until 4/RPT is pressed again. "RPT" will disappear from the display. Changer mode 3/ - Pause Interrupts CD playback. "PAUSE" will appear in the display. Press button again to resume CD playback. 4/RPT Repeats tracks: press 4/RPT. "REPEAT-T" will appear briefly. The track will be repeated until 4/RPT is pressed again. Repeat CD: select "REPEAT-D". Hold down 4/RPT to select "REPEATD" until a beep is emitted. To stop "REPEAT-CD", press 4/RPT again. 5/MIX "MIX CD" plays the tracks of one CD in random order. "MIX ALL" plays the tracks of all the CDs in one changer magazine in random order. To turn "MIX CD" on: Press 5/MIX briefly.
6/LIST Displays a list of the CD names ? BA/TS Switches between the wavebands/ memory banks FM1, FM2, FMT (Travelstore), MW and LW Extra function: Travelstore To store the six most powerful radio stations in the Travelstore bank: Press BA/TS until a beep sounds and "T-STORE" appears. @ PTY (Programme Type) You can select among various programme types. Using the rocker switch <<>> it is possible to recall all PTY programme types, if PTY is activated ("PTY" lights up in the display).
St.TropRavLasVegasDJ gb 31 22.03.2001, 16:11 Uhr
TA (Traffic Announcement = priority for traffic programmes) TA on/off: Press AFTA briefly: "TA" will appear in the display, priority for traffic programmes activated. TP" (Traffic Programme) will be displayed when the radio is tuned into a station which broadcasts traffic information.

St.TropRavLasVegasDJ gb 34 22.03.2001, 16:11 Uhr
The Radio Data System enhances your enjoyment when you listen to FM radio stations. More and more radio stations now broadcast RDS information along with their regular programming. As soon as a programme has been identified, the station name including a regional identifier, if applicable, will appear in the display, for example, NDR1 NDS (regional programme in Lower Saxony, Germany). When RDS is activated, the preset buttons become programme buttons. You now know exactly which programme you have tuned into, making it easy to find the desired station quickly. But RDS also offers you further advantages:
While searching for the strongest reception signal, the radio may switch to mute briefly. If "SEARCH" appears in the display when the radio is switched on or one of the stored frequencies recalled, the unit is already automatically searching for an alternative frequency. "SEARCH" will disappear from the display when the alternative frequency has been found or after the frequency band has run through completely. If the reception quality of the programme selected deteriorates beyond a certain point: Tune into another station.

Selecting a waveband

The following wavebands are available: UKW (FM) 87,MHz, MW (AM) kHz and LW kHz Press the BA/TS button to select the desired waveband.
FRANAIS PORTUGUS ESPAOL SVENSKA NEDERLANDS ITALIANO

Station tuning

Automatic seek tuning / Press / , the car radio will automatically search for the next station. If you hold / pressed up or down on the rocker switch, seek tuning will speed up in the corresponding direction.
REG - regional programme AF - Alternative frequency
The AF (Alternative Frequency) function makes sure that the radio always tunes into the strongest frequency for the currently selected programme automatically. If this function is activated, "AF" will appear in the display. To switch AF on/off, press the AFTA button for a longer time. Certain radio programmes are split up at times into regional programmes offering local information. The 1st programme broadcast by NDR, for example, offers programmes with different contents in the northern German states of Schleswig-Holstein, Hamburg and Lower Saxony at certain times of the day. If you are listening to a particular regional programme and wish to continue doing so, select "REG ON" in the DSC mode.

St.TropRavLasVegasDJ gb 35 22.03.2001, 16:11 Uhr
If you leave the service area of the regional programme you are tuned into, or if you would like to take full advantage of RDS service, switch to "REG OFF" in the DSC mode.
Radio operation with RDS (Radio Data System)
Scrolling through the broadcast networks (FM only)
You can use the <<>> buttons to tune into stations in your reception area.
Automatic seek tuning Up Down << / >> Up/down in short intervals (on FM only if "AF" is switched off)
Switching between the memory banks (FM)
You can switch between the memory banks 1, 2 and T in order to store stations and recall them later. The currently selected memory bank will appear in the display. Press the BA/TS button as many times as necessary until the desired memory bank lights up in the display.
If it is possible to receive several programmes in the same broadcast network, you can scroll through them in the forwards direction by pressing >>, or backwards using the << button, e.g. NDR 1, 2, 3, 4. For this to work properly you must have already tuned into the stations at least once and "AF" must be active (lights up in the display). To do this, you can start the Travelstore seek operation: Press BA/TS for 2 seconds; the system will start to run through the frequency band. If "AF" is not lit up, Press AFTA until a beep is emitted. It is now possible to select stations using <<>>.
Manual tuning with <<>> You can also tune into a station manually. Important: AF and PTY must be switched off (i.e. the symbols do not light up in the display). If necessary, deactivate these functions: Press AFTA or PTY. Manual tuning: Press << >>; the frequency will change in short intervals in the corresponding direction. If you hold << >> pressed to the left or the right on the rocker switch, the frequency scan will speed up.

Storing stations

On FM, you can store six stations on the preset buttons 1, 2, 3, 4, 5, 6 for each of the memory banks (1, 2, T). On MW/LW, you can also store six stations each. Select the appropriate waveband by pressing BA/TS. Tune into a station with the rocker switch (either automatically / or manually <</>>). Press the desired preset button until the radio resumes play after the muting (takes approx. 2 seconds) or until you hear a beep. Now the station has been stored. The display will indicate which preset button is currently activated.
St.TropRavLasVegasDJ gb 36 22.03.2001, 16:11 Uhr
Automatically storing the strongest stations with Travelstore
You can automatically store the six FM stations with the most powerful signals in your current reception area sorted according to their signal strength. This function is particularly convenient on longer trips. Press the BA/TS button for 2 seconds. "T-STORE" will appear in the display. The six strongest FM stations will be automatically stored on the memory bank "T" (Travelstore). When this process has been completed, the radio will play the strongest station. If desired, stations can also be stored manually in the Travelstore bank (see "Storing stations").

Scanning stored stations with Preset Scan
You can scan all of the stored stations on any of the wavebands and in the selected FM memory bank. To start Preset Scan: Press SCA for approx. 2 seconds. All of the stations stored on the waveband will be scanned one after the other. "PSSCAN" will appear in the display, alternating with the station name or frequency. The abbreviation for the station currently playing (e.g. P1) will flash in display field 1. Continue listening to a scanned station/ end Preset Scan: Press SCA briefly.
To select a scanned station/switch off the Scan function: Press SCA briefly.

Changing the scan time

The scan time can be selected from between 5 to a maximum of 20 seconds. If you would like to alter the scan time, please refer to the section on "DSC programming - SCANTIME".
Selecting the automatic tuning sensitivity
You can alter the automatic tuning sensitivity. If "lo" is displayed, the radio will only pick up strong, local stations (low sensitivity). If "lo" does not light up, the radio will also pick up weaker, more distant stations. If you would like to alter the sensitivity level please refer to the section on "DSC programming - SENS".
Recalling stored stations
You can recall any stored station at the touch of a button. Select the waveband by pressing BA/ TS. For FM, also choose the corresponding memory bank by pressing the BA/ TS button as many times as necessary until the desired bank appears in the display. Press the corresponding preset button briefly to recall the station.
Scanning stations with Radio Scan
You can scan through all of the stations in your reception area. To start the Scan function: Press SCA briefly. The scanned frequency or the station name will start flashing in the display. During the scanning process "SCAN" will appear in the display.

PTY - Programme Type

PTY is an RDS service offered by an increasing number of broadcasting stations. This feature allows you to select FM stations according to their programme type. After
St.TropRavLasVegasDJ gb 37 22.03.2001, 16:11 Uhr
you have chosen the PTY of your preference, the corresponding stations can be selected either by seek tuning or using the scan function. Programme types Switch PTY on. Use <<>> to have the last selected programme type displayed and to choose a new one. You can select any one of the stored types with the preset buttons 1-6. The following list indicates some of the programme types which are currently available. WEATHER FINANCE TRAVEL HOBBIES JAZZ COUNTRY NEWS INFO SPORT CULTURE SCIENCE VARIED 38
St.TropRavLasVegasDJ gb 38
POP MUSIC ROCK MUSIC CLASSICS Switching PTY ON/OFF Press PTY. When the function is active, the programme type selected last will briefly appear in the display. "PTY" will appear permanently. Checking the programme type of the station Press PTY for approx. 2 seconds. After the beep tone the display will show the programme type offered by the station currently playing. If "NONE" appears in the display, the current station has no PTY code. Displaying the selected programme type Press << or >>. The programme type selected last will be displayed briefly. Selecting a programme type a) Using the preset buttons When PTY is switched on, you can use the preset buttons 1-6 to select the programme types stored at the factory. Press one of the presets 1-6.

The selected programme type will be displayed for 2 seconds. If you would like to listen to a station with this PTY, press / to start the seek tuning function. If the radio is unable to find a station offering the selected programme type, the display will show "NO PTY" and a beep tone will be emitted. The radio will select the station which was tuned into before seek tuning was activated. You can assign different programme types to each preset position. Please refer to the next section on "Storing programme types". b) Using the <<>> buttons on the rocker switch When PTY is switched on, you can select a programme type using buttons <<>>. Press << or >>; the programme type selected last will be displayed for 3 seconds. During this period press >> (forwards) or << (backwards) to select the desired type. Press << or >> as many times as required. If you would like to listen to a station with the selected PTY,
Storing programme types Each of the preset buttons 1-6 has been assigned one programme type at the factory. If desired, you can also replace these with other available programme types. To do so, make sure that "PTY" lights up in the display. If necessary, press the PTY button to switch on the function. Select a programme type using buttons <<>> and hold down the desired preset button (16) until you hear a beep. Now the selected programme type can be recalled by pressing this preset as long as "PTY" lights up in the display.
To switch off PTY-SCAN: Press SCA again. PTY priority Situation: PTY is switched on and lights up in the display. No station offering the selected programme type can be found currently in your reception range (with seek tuning or scan). The set will switch back to the station previously tuned into. As soon as it is possible to receive a programme in the broadcast network with the PTY selected, the radio will switch over to the corresponding station for the duration of the programme. Example: - Station playing: NDR3. - "PTY" lights up in the display. - Programme type "POP" selected. - Seek tuning is started.
Note: As already mentioned, these functions are only supported by a limited number of RDS stations at the present time.
St.TropRavLasVegasDJ gb 39 22.03.2001, 16:11 Uhr
After the PTY programme has ended the system will switch back to the previous mode (radio, cassette or CD).
During cassette or CD operation, the set will also switch to the radio programme if the selected PTY becomes available within the broadcast network.

/ to start the seek tuning press function. If the radio is unable to find a station offering the selected programme type, the display will show "NO PTY" and a beep tone will be emitted. The radio will select the station which was tuned into before seek tuning was activated.
Scanning stations with PTY SCAN Important: "PTY" must appear in the display. Press SCA. All of the stations in your current reception area offering the selected programme type will be scanned.
No station with "PTY-POP" can be found. The display shows "NO PTY" and automatically switches back to NDR3. NDR2 airs a "PTY-POP" programme. The radio will switch to the linked station NDR2 for the duration of the "POP" programme.
Traffic programme station reception with RDS-EON
The abbreviation "EON" stands for Enhanced Other Networks, which means that information is exchanged within a radio network. Many FM radio stations provide their service area with traffic messages at regular intervals. Along with their programmes, all traffic programme stations transmit a special carrier signal, which is decoded by your car radio. If this signal is identified, "TP" will appear in the display (Traffic Programme). In addition to these, there are also stations which do not actually transmit traffic information themselves, but by using RDS-EON it is possible for them to forward the traffic messages broadcast by another traffic programme station in the same radio network. If you want to have the priority for traffic announcements activated while listening to one of these stations (e.g. NDR3), "TA" must appear on the display panel. If a traffic announcement is broadcast, the radio will automatically switch to the linked traffic programme station (in this case, NDR2) for the duration of the message and return to the original programme (NDR3) afterwards.
Traffic announcement priority on/off
If the priority for traffic announcement programmes is activated, "TA" will light up in the display. To switch the priority on or off: Press the AFTA button. If you press AFTA while a message is being broadcast, this message will be interrupted. The unit will then switch back to the previous mode. The priority for other traffic messages remains active. Please note that several buttons have no function while a traffic announcement is broadcast.

Press the rocker switch or press a preset button which has a traffic programme station allocated to it. Alternatively: b) Switch off the priority for traffic announcements: Press TA. "TA" will disappear from the display.
Automatic seek tuning start (Cassette and CD changer mode)
If you leave the reception area for the traffic programme station you have tuned into while you are listening to a cassette or CD, the system will automatically start searching for a new traffic programme. If no such station is found within approx. 30 seconds, a warning beep will sound every 30 seconds. To switch the warning beep off, press TA button.

Warning beep

If you leave the reception area of the traffic programme station currently tuned into, you will hear a warning beep after approx. 30 seconds. This warning will also be emitted if you press a preset button for a station which does not send the traffic programme signal (TP). Switching the warning beep off a) Tune into another station offering traffic information:
Adjusting the volume for traffic announcements and the warning beep
Although this volume was preset at the factory, you can use the DSC function to alter the setting (see "DSC programming - TA VOL").
St.TropRavLasVegasDJ gb 40 22.03.2001, 16:11 Uhr

Cassette playback

Insert the tape into the slot with the open side showing to the right. Press SRC to select the tape deck mode. "CASSETTE" will appear in the display. The tape will play in the direction "TAPE 1". If a tape is already inside, press SCR to select "CASSETTE" mode. The tape will play in the direction last selected.

Repeat song titles

During tape playback press 4/RPT. "RPT" will light up in display field 3; "REPEAT-T" will appear briefly in display field 2. While the tape is rewinding, "REWIND-T" will appear in the display. The title playing will repeat until you press 4/RPT again. "RPT" will disappear from the display. Playback will now continue normally.

Reversing the tape

Press to change the tape direction during cassette playback from TAPE1 to TAPE2 or vice versa: At the end of the tape, the unit will automatically switch to the opposite side.

Tape type selection

If you are playing METAL or CrO2 cassettes, press MTL. "MTL" will then light up in display field 1.
To scan all of the songs on a tape, press SCA. "SCAN" will appear in the display. All of the titles on the tape in the tape deck will be scanned briefly one after the other. Press SCA again to switch the SCAN function off. The title currently playing will continue to play.

Skipping cassette titles

CPS stands for Cassette Program Search and allows you to skip over songs on the tape. The titles must, however, be separately by at least 3 seconds of blank tape. or During tape playback press either on the rocker switch to activate the CPS mode. "CPS FF" or "CPS FR" will appear in the display. Press the button / repeatedly to skip the corresponding number of titles in either direction.

Fast winding

Use the rocker switch to fast forward or rewind the tape during cassette operation: >> forward << rewind.

to eject the cassette.

St.TropRavLasVegasDJ gb 41 22.03.2001, 16:11 Uhr

Cassette eject

Cassettes which have been recorded with the DOLBY B NR system exhibit considerably less tape noise and higher dynamics. To play cassettes recorded using this system, press. will light up in display field 3
DOLBY B NR (Noise reduction)*
The number of titles to be skipped will appear in the display and count down until the title selected has been reached. Press the button indicating the opposite direction or << >> to stop the function.
"FORWARD" or "REWIND" will light up in the display. Press the button indicating the opposite direction or / to stop the function. If you have activated "Radio Monitor ON", the unit will play the radio station last selected while the tape is winding. You can alter the Radio Monitor setting in DSC mode.

Cassette deck operation

CD changer operation
Traffic information during cassette playback
The Traffic Announcement function (priority for traffic programmes) makes it possible to listen to traffic information during cassette playback. If a traffic message is broadcast, cassette playback will be interrupted and you will hear the message. This function is active, if "TA" lights up in the display. Press AFTA briefly to activate TA.

Deleting CD names

Deleting one CD name Proceed as follows: Select DSC programming mode. Press DSC. Press / to select CDC NAME. Press << >> to select the name you want to delete. Press / to confirm your selection. Press DSC and hold it down. After 2 seconds you will hear a beep and "ONE NAME" will appear in the display. Release DSC after 2 seconds but before 8 seconds. "DELETED" will appear in the display. The name of this CD has now been deleted. The main CDC NAME menu will appear again in the display. Deleting all CD names All of the CD names stored in the CD changer will be deleted. Select DSC programming mode. Press DSC. Press / to select CDC NAME. Press << >> to select the name. Press DSC and hold it down. After 2 seconds and after 8 seconds you will hear a beep respectivly "ONE NAME" and then "ALLNAMES" will appear in the display.
Release DSC. "DELETED" will appear in the display. The names of all of the CDs have now been deleted. The main CDC NAME menu will appear again in the display.
St.TropRavLasVegasDJ gb 44 22.03.2001, 16:11 Uhr
This unit is equipped with an internal clock. Display priority: until To alter the display priority, press you hear a beep. Press this button repeatedly until the desired display appears (does not apply for radio mode). Radio mode Press this button to display the clock briefly. Cassette mode Press this button to switch between the track played and the clock. Changer mode Press to switch between a display of the CD Name,CD number, the playing time elapsed and the clock.

Setting the TIMER

Using this unit it is possible to conveniently switch on a radio station you have selected at any time before. The radio station can be selected regardless of the currently active operating mode. Proceed as follows: Select the radio station of your choice. Press DSC. Press / to select TIMER. If you want to turn off the Timer, press the << button and "OFF" will appear in display field 2. If you want to set the timer press the >> button. The timer time previously set will be shown first. Press >> button again to enter edit mode. The minutes will flash. Press / to set the minutes. Press << to activate the hour. Press / to set the hour. Press DSC to store your entry. You have now set the TIMER.

Setting the clock

Set the clock in the DSC mode. Press DSC briefly. / to select the function Press "CLOCKSET". Press << >> to activate the hours or the minutes. The option you can set will flash. Press / to alter the flashing display. When you have completed the setting, press DSC briefly to store it.
St.TropRavLasVegasDJ gb 45 22.03.2001, 16:11 Uhr

DSC programming

The car radio has been equipped with DSC (Direct Software Control) to allow you to customise certain programmable, basic settings to suit your personal needs and preferences and then store them. The basic settings for this audio equipment were made at the factory. In the following you can find an overview of these settings, so that you can always reset to them if desired. If you wish to alter any of the programming, press DSC. MENU / will light up in the display. Use the / buttons on the rocker switch to select the functions you wish to change. The display will show you the setting you have selected. Press << >> on the rocker switch to change the values. Confirm the setting you have selected by pressing the DSC button. REG OFF LOUDNESS Loudness boosts the bass frequencies at low volume. LOUD 1 - Low boost LOUD 6 - Max. boost BAS CENT Bass Center Frequency Adjustment. Adjusts the mid-range frequency to the specific equipment in the vehicle (50 or 100 Hz) The traffic announcement and warning beep volume can be set between 0 to 63. The message will then come through at this volume, if the standard volume is lower.If the standard volume is set higher than the TA VOL level, then the traffic report will be played at the standard volume. To listen to a regional radio programme outside of its RDS transmission range, switch on "REG ON". For full RDS service, switch to "REG OFF". SENS LO Adjusts seek tuning sensitivity."LO" stands for local reception."DX" stands for distant reception. Select "LO 3" if you want to receive strong stations in the local area, select "DX 1" if you want to tune into weaker stations which are further away.

TA VOL

CDC NAME Names CDs.A maximum of 99 CDs can be given names of up to 7 characters. CLOCK 24 Switches between 12-h and 24-h clock display.

CLOCKSET Sets the clock manually. Press << >> to select hours/minutes. Press / to adjust the flashing value. TIMER Switches on a selected radio station at a selected time. Sets the turn-on volume. Press << >> to adjust the turn-on volume as desired. Changes the mute volume. Changes the volume of the acknowledgement tone (beep) between 0 and 9. (0 = off)

ON VOL

/ Select function << >> Adjust/recall value

MUTE BEEP

St.TropRavLasVegasDJ gb 46 22.03.2001, 16:11 Uhr
Radio Monitor If the Radio Monitor function is active during fast winding of the tape, the unit will switch to the radio and play the station listened to last. Use this function to set the scan time for the radio or CD player from 5 to 20 seconds. Switches the Blank Skip function off and on; there must be at least 10 seconds of blank tape between songs. Select AUX-ON if you wish to connect a Discman or Walkman instead of the CD changer. Switches the display on or off while the car radio is turned off.
Overview of the DSC factory settings
LOUDNESS BAS CENT TA VOL REG SENS CDC NAME CLOCK CLOCKSET TIMER ON VOL MUTE BEEP RM SCANTIME BL SKIP AUX DISP 3 Hz OFF DX1 CLOCK 24 OFF 3 ON 10 seconds ON OFF OFF

Amplifier

Output power: 4 x 25 W RMS power acc. to DIN 45324 at 14.4 V 4 x 40 W max. power
Wavebands: FM : MW : LW : 87.5 - 108 MHz 531 - 1602 kHz 153 - 279 kHz 35 - 16000 Hz

SCANTIME

FM frequency response:

Cassette

Frequency response: 30 - 18000 Hz
Optional: Saint Tropez RCM 168, Ravenna RCM 168 Included: Las Vegas DJ This equipment offers you convenient control of a Blaupunkt CD changer CDC-A 08 or CDC-A 072. Subject to modification! 47

DISPLAY

BL SKIP

Specifications

Radio / Cassette

Operating instructions

S.Tr/Rav/Rim RCM168/L.V. d 1 13.05.2002, 12:38 Uhr

PORTUGUS

ESPAOL

SVENSKA

NEDERLANDS

ITALIANO

FRANAIS
Saint Tropez RCM 168 Ravenna RCM 168 Rimini RCM 169 Las Vegas DJ

ENGLISH

DEUTSCH
Fernbedienung RC 08 (Option) Remote control RC 08 (optional) Tlcommande RC 08 (en option) Telecomando RC 08 (optional) Afstandsbediening RC 08 (Optie) Fjrrkontroll RC 08 (Tillval) Mando a distancia RC 08 (opcional) Telecomando RC 08 (opo)
S.Tr/Rav/Rim RCM168/L.V. d 2 13.05.2002, 12:38 Uhr

Display

The display consists of three fields and varies according to the operating mode and function.

Display field 1:

Radio mode Memory banks and wavebands Brief indication of preset station (e.g. P1) Cassette mode CAS - cassette inserted MTL - tape type Changer mode Current track Audio Numeric and graphic representation of volume and audio settings DSC Permanent display for DSC programming. Graphic representation of the adjusted volume level.

Display field 2:

Radio mode Radio frequency or station name PTY programme type Clock display Cassette mode TAPE1/TAPE2 - side of tape playing Active functions (e.g. CPS) Clock display Changer mode Current CD playing CD time (elapsed time), CD name, CD number and Brief indication of changes in function Clock display DSC Serves as display and input field during DSC programming Clock display Miscellaneous Indicates new source (e.g. when changing from radio to cassette) and active functions (e.g. BASS, SCAN)

Display field 3:

Active functions - Stereo - Cassette inserted - CD changer connected - Loudness
Radio mode AF - Alternative Frequency for RDS PTY - RDS programme type TA - Priority for traffic information TP - Traffic programme station lo - Seek tuning sensitivity Cassette mode RPT - Repeat function - Dolby noise reduction Changer mode RPT - Repeat function MIX - Tracks played at random
S.Tr/Rav/Rim RCM168/L.V. gb 26 13.05.2002, 13:00 Uhr
Display... 26 Quick reference.. 28
Remote control operation.. 32

Important notes.. 32

What you need to know.. 32 Traffic safety.. 32 Installation.. 32 Telephone mute.. 32 Warning note.. 32 Accessories... 33
Selecting the operating mode. 34 Radio operation with RDS.. 35
AF - Alternative frequency. 35 REG - regional programme.. 35 Selecting a waveband.. 35 Station tuning.. 35 Automatic seek tuning /. 35 Scrolling through the broadcast networks (FM only).. 36 Switching between the memory banks (FM).. 36 Storing stations. 36 Automatically storing the strongest stations with Travelstore.. 37
Traffic programme station reception with RDS-EON. 40
Traffic announcement priority on/off. 40 Warning beep.. 40 Switching the warning beep off. 40 Automatic seek tuning start.. 40 Adjusting the volume for traffic announcements and the warning beep. 40

Clock.. 45

Setting the clock.. 45 Setting the TIMER. 45

DSC programming.. 46

Overview of the DSC factory settings. 47
Cassette deck operation. 41
Cassette playback. 41 Reversing the tape.. 41 Skipping cassette titles. 41 Repeat song titles.. 41

Specifications.. 47

S.Tr/Rav/Rim RCM168/L.V. gb 27 13.05.2002, 13:00 Uhr
Theft protection. 33 Detaching the release panel. 33 Attaching the release panel.. 33 Fixing the release panel.. 34

Release panel.. 33

Recalling stored stations. 37 Scanning stored stations with Preset Scan... 37 Scanning stations with Radio Scan.. 37 Changing the scan time.. 37 Selecting the automatic tuning sensitivity.. 37 PTY - Programme Type.. 37 Programme types.. 38 Switching PTY ON/OFF. 38 Checking the programme type of the station.. 38 Displaying the selected programme type... 38 Selecting a programme type. 38 Storing programme types.. 39 Scanning stations with PTY SCAN. 39 PTY priority.. 39
Scan... 41 Fast winding... 41 Tape type selection.. 41 DOLBY B NR (Noise reduction)*. 41 Cassette eject.. 41 Traffic information during cassette playback.. 42
CD changer operation.. 42
Inserting CDs.. 42 Ejecting CDs.. 42 CD playback.. 42 Selecting a CD.. 42 Selecting a track.. 43 RPT.. 43 MIX.. 43 LIST... 43 SCAN... 43 Naming CDs.. 43 Deleting CD names.. 44 Deleting one CD name. 44 Deleting all CD names.. 44

Contents

Quick reference
1 REL To release the detachable panel (theft protection). Press this knob and remove the release panel. 2 ON - Power on/off Press this button to turn the unit on. It will play at the preset volume. If you press this button briefly while listening to the radio, the volume will mute instantly (MUTE). Cancel this function by pressing the ON button again. You can adjust the mute volume (refer to the section on DSC programming). Press the button for about 2 seconds to turn the unit off. Switching on/off with the ignition: If the unit has been connected as described in the instructions, it can also be turned on and off with the vehicle ignition. Press the ON button to keep on operating the unit when the ignition is switched off. To prevent the battery from running down, the system will turn off automatically after one hour of playback. 3 Volume knob Turn the knob to adjust the volume. 4 DSC Direct Software Control This feature allows you to adjust the basic programmable settings. For further information, refer to the section on DSC programming. 5 Cassette slot Insert the tape into the slot with the open side showing to the right. The tape will be played in direction "TAPE 1". 6 Display The display indicates all settings, operating modes and functions. 7 This button switches tape playback between Tape 1 and Tape 2 (different sides of the tape). 8 Eject Press this button to eject the cassette. Radio mode / Seek tuning Up Down Up/down in short intervals (for FM only if "AF" is off) 9 Rocker switch

The selected values will appear in the display. The last setting is stored automatically.
Radio mode Press SCA briefly. All of the FM stations within reception range will be scanned. "SCAN" will appear in the display, alternating with the radio station currently being scanned (flashing). Preset Scan Press SCA for approx. 2 seconds until you hear a beep. "PS Scan" will appear in the display, followed by the station symbol (flashing). The stations stored on the station preset buttons and within reception range will be scanned. To stop Scan / Preset Scan: Press SCA again. PTY Scan PTY Scan cannot be started unless PTY is switched on ("PTY" will light up in the display.) The radio stations for the program type selected will be scanned. "PTY SCAN" will appear in the display, alternating with radio station currently being scanned. To stop Scan / PTY Scan: Press SCA again.
Cassette mode Press SCA briefly. All of the titles on the cassette will be scanned. To stop Scan: Press SCA again Changer mode Press SCA briefly. All of the CD tracks will be scanned. "SCAN" will appear in the display. To stop CD scan: Press SCA again. = DIS - Clock display Radio mode Press this button briefly and the time will appear in the display for a short while. Changer mode Press this button to switch the display between the CD Name, CD number, playback time indication and clock. Cassette mode Press this button to switch the display between the time and the cassette track (TAPE 1/TAPE 2).
> Preset buttons 1 to 6 Radio mode You can store six stations in each FM memory bank (1, 2, and "T"). On MW and LW you can also store six stations each. Store station - Hold down a preset button in radio mode until you hear a beep. Recall station - Select a waveband and the memory bank on FM as well; press the corresponding preset button briefly. Cassette mode 1/MTL Selects between chrome or iron oxide tape types. Press 1/MTL. 2/ - Dolby Reduces excess noise when playing tapes recorded using the DOLBY B system. 3/ - Pause Interrupts tape playback. "PAUSE" will appear in the display. Press this button once again to resume playback.

S.Tr/Rav/Rim RCM168/L.V. gb 30 13.05.2002, 13:00 Uhr
4/RPT Repeats song titles. "REPEAT-T" will appear briefly in the display. RPT will light up in the display and the title will repeat until 4/RPT is pressed again. "RPT" will disappear from the display. Changer mode 3/ - Pause Interrupts CD playback. "PAUSE" will appear in the display. Press button again to resume CD playback. 4/RPT Repeats tracks: press 4/RPT. "REPEAT-T" will appear briefly. The track will be repeated until 4/RPT is pressed again. Repeat CD: select "REPEAT-D". Hold down 4/RPT to select "REPEATD" until a beep is emitted. To stop "REPEAT-CD", press 4/RPT again. 5/MIX "MIX CD" plays the tracks of one CD in random order. "MIX ALL" plays the tracks of all the CDs in one changer magazine in random order. To turn "MIX CD" on: Press 5/MIX briefly.
6/LIST Displays a list of the CD names ? BA/TS Switches between the wavebands/ memory banks FM1, FM2, FMT (Travelstore), MW and LW Extra function: Travelstore To store the six most powerful radio stations in the Travelstore bank: Press BA/TS until a beep sounds and "T-STORE" appears. @ PTY (Programme Type) You can select among various programme types. Using the rocker switch <<>> it is possible to recall all PTY programme types, if PTY is activated ("PTY" lights up in the display).
S.Tr/Rav/Rim RCM168/L.V. gb 31 13.05.2002, 13:00 Uhr
TA (Traffic Announcement = priority for traffic programmes) TA on/off: Press AFTA briefly: "TA" will appear in the display, priority for traffic programmes activated. TP" (Traffic Programme) will be displayed when the radio is tuned into a station which broadcasts traffic information.
The current setting is briefly indicated in the display: "MIX-CD". Hold down 5/MIX to select "MIX-ALL". Keep 5/MIX pressed down until a beep is emitted.The desired option lights up in the display. To stop MIX functions, press 5/MIX briefly.
A AFTA Alternative Frequency in RDS mode: If "AF" appears in the display, the radio will automatically search for the best radio frequency offering the same programme. AF on/off: Press AFTA until a beep is emitted.

Important notes

Remote control operation
General SRC Press briefly: change the audio source Press briefly: muting Higher volume Lower volume Seek tuning upwards Seek tuning downwards Next FM preset upwards Press briefly: select the waveband Hold down: Travelstore Select track (SCPS) upwards Select track (SCPS) downwards Fast forward Fast rewind Hold down: reversing the tape Next CD Previous CD Press briefly: next track Hold down: cue Press briefly: previous track Hold down: review Hold down: list function

Theft protection

This unit is equipped with a detachable control panel. A car radio without a control panel is worthless to thieves. Protect your car audio system and detach the control panel when you leave your vehicle. Thanks to the release panels wellplanned design, it is very easy to attach and detach. Note: Do not pull the release panel straight out from the chassis, but rather slide it to the left to detach it as illustrated below. Be sure not to drop the panel. Do not expose the release panel to direct sunlight or other heat sources. Do not expose it to moisture.
The unit will turn on again automatically when you re-attach the release panel.
Press the REL button to release the control panel. Then remove the panel and insert it into the carrying case provided.
S.Tr/Rav/Rim RCM168/L.V. gb 33 13.05.2002, 13:00 Uhr
Detaching the release panel
Slide the panel (B) from the left along the guide of the chassis (A). Gently push the left side of the panel against the front of the chassis until it snaps into place.
Attaching the release panel
If the unit was still in operation, it will turn off now. All current settings will remain stored. If a cassette is inserted, it will remain in the unit.

Release panel

Selecting the operating mode

Fixing the release panel

If you wish to fix the release panel to the chassis permanently, screw down the enclosed bolt into the hole (C) on the left hand side of the chassis, see Fig. Use the SRC (source) button to select between radio, cassette and CD-Changer mode. The CD changer mode is not available unless a CD changer is connected. To select the operating mode: Press SRC.
S.Tr/Rav/Rim RCM168/L.V. gb 34 13.05.2002, 13:00 Uhr
The Radio Data System enhances your enjoyment when you listen to FM radio stations. More and more radio stations now broadcast RDS information along with their regular programming. As soon as a programme has been identified, the station name including a regional identifier, if applicable, will appear in the display, for example, NDR1 NDS (regional programme in Lower Saxony, Germany). When RDS is activated, the preset buttons become programme buttons. You now know exactly which programme you have tuned into, making it easy to find the desired station quickly. But RDS also offers you further advantages:
While searching for the strongest reception signal, the radio may switch to mute briefly. If "SEARCH" appears in the display when the radio is switched on or one of the stored frequencies recalled, the unit is already automatically searching for an alternative frequency. "SEARCH" will disappear from the display when the alternative frequency has been found or after the frequency band has run through completely. If the reception quality of the programme selected deteriorates beyond a certain point: Tune into another station.

Selecting a waveband

The following wavebands are available: UKW (FM) 87,MHz, MW (AM) kHz and LW kHz Press the BA/TS button to select the desired waveband.
FRANAIS PORTUGUS ESPAOL SVENSKA NEDERLANDS ITALIANO

Station tuning

Automatic seek tuning / Press / , the car radio will automatically search for the next station. If you hold / pressed up or down on the rocker switch, seek tuning will speed up in the corresponding direction.
REG - regional programme AF - Alternative frequency
The AF (Alternative Frequency) function makes sure that the radio always tunes into the strongest frequency for the currently selected programme automatically. If this function is activated, "AF" will appear in the display. To switch AF on/off, press the AFTA button for a longer time. Certain radio programmes are split up at times into regional programmes offering local information. The 1st programme broadcast by NDR, for example, offers programmes with different contents in the northern German states of Schleswig-Holstein, Hamburg and Lower Saxony at certain times of the day. If you are listening to a particular regional programme and wish to continue doing so, select "REG ON" in the DSC mode.
S.Tr/Rav/Rim RCM168/L.V. gb 35 13.05.2002, 13:00 Uhr
If you leave the service area of the regional programme you are tuned into, or if you would like to take full advantage of RDS service, switch to "REG OFF" in the DSC mode.
Radio operation with RDS (Radio Data System)
Scrolling through the broadcast networks (FM only)
You can use the <<>> buttons to tune into stations in your reception area.
Automatic seek tuning Up Down << / >> Up/down in short intervals (on FM only if "AF" is switched off)
Switching between the memory banks (FM)
You can switch between the memory banks 1, 2 and T in order to store stations and recall them later. The currently selected memory bank will appear in the display. Press the BA/TS button as many times as necessary until the desired memory bank lights up in the display.

If it is possible to receive several programmes in the same broadcast network, you can scroll through them in the forwards direction by pressing >>, or backwards using the << button, e.g. NDR 1, 2, 3, 4. For this to work properly you must have already tuned into the stations at least once and "AF" must be active (lights up in the display). To do this, you can start the Travelstore seek operation: Press BA/TS for 2 seconds; the system will start to run through the frequency band. If "AF" is not lit up, Press AFTA until a beep is emitted. It is now possible to select stations using <<>>.
Manual tuning with <<>> You can also tune into a station manually. Important: AF and PTY must be switched off (i.e. the symbols do not light up in the display). If necessary, deactivate these functions: Press AFTA or PTY. Manual tuning: Press << >>; the frequency will change in short intervals in the corresponding direction. If you hold << >> pressed to the left or the right on the rocker switch, the frequency scan will speed up.

Storing stations

On FM, you can store six stations on the preset buttons 1, 2, 3, 4, 5, 6 for each of the memory banks (1, 2, T). On MW/LW, you can also store six stations each. Select the appropriate waveband by pressing BA/TS. Tune into a station with the rocker switch (either automatically / or manually <</>>). Press the desired preset button until the radio resumes play after the muting (takes approx. 2 seconds) or until you hear a beep. Now the station has been stored. The display will indicate which preset button is currently activated.
S.Tr/Rav/Rim RCM168/L.V. gb 36 13.05.2002, 13:00 Uhr
Automatically storing the strongest stations with Travelstore
You can automatically store the six FM stations with the most powerful signals in your current reception area sorted according to their signal strength. This function is particularly convenient on longer trips. Press the BA/TS button for 2 seconds. "T-STORE" will appear in the display. The six strongest FM stations will be automatically stored on the memory bank "T" (Travelstore). When this process has been completed, the radio will play the strongest station. If desired, stations can also be stored manually in the Travelstore bank (see "Storing stations").
Scanning stored stations with Preset Scan
You can scan all of the stored stations on any of the wavebands and in the selected FM memory bank. To start Preset Scan: Press SCA for approx. 2 seconds. All of the stations stored on the waveband will be scanned one after the other. "PSSCAN" will appear in the display, alternating with the station name or frequency. The abbreviation for the station currently playing (e.g. P1) will flash in display field 1. Continue listening to a scanned station/ end Preset Scan: Press SCA briefly.

The selected programme type will be displayed for 2 seconds. If you would like to listen to a station with this PTY, press / to start the seek tuning function. If the radio is unable to find a station offering the selected programme type, the display will show "NO PTY" and a beep tone will be emitted. The radio will select the station which was tuned into before seek tuning was activated. You can assign different programme types to each preset position. Please refer to the next section on "Storing programme types". b) Using the <<>> buttons on the rocker switch When PTY is switched on, you can select a programme type using buttons <<>>. Press << or >>; the programme type selected last will be displayed for 3 seconds. During this period press >> (forwards) or << (backwards) to select the desired type. Press << or >> as many times as required. If you would like to listen to a station with the selected PTY,
Storing programme types Each of the preset buttons 1-6 has been assigned one programme type at the factory. If desired, you can also replace these with other available programme types. To do so, make sure that "PTY" lights up in the display. If necessary, press the PTY button to switch on the function. Select a programme type using buttons <<>> and hold down the desired preset button (16) until you hear a beep. Now the selected programme type can be recalled by pressing this preset as long as "PTY" lights up in the display.
To switch off PTY-SCAN: Press SCA again. PTY priority Situation: PTY is switched on and lights up in the display. No station offering the selected programme type can be found currently in your reception range (with seek tuning or scan). The set will switch back to the station previously tuned into. As soon as it is possible to receive a programme in the broadcast network with the PTY selected, the radio will switch over to the corresponding station for the duration of the programme. Example: - Station playing: NDR3. - "PTY" lights up in the display. - Programme type "POP" selected. - Seek tuning is started.
Note: As already mentioned, these functions are only supported by a limited number of RDS stations at the present time.

S.Tr/Rav/Rim RCM168/L.V. gb 39 13.05.2002, 13:00 Uhr
After the PTY programme has ended the system will switch back to the previous mode (radio, cassette or CD).
During cassette or CD operation, the set will also switch to the radio programme if the selected PTY becomes available within the broadcast network.
/ to start the seek tuning press function. If the radio is unable to find a station offering the selected programme type, the display will show "NO PTY" and a beep tone will be emitted. The radio will select the station which was tuned into before seek tuning was activated.
Scanning stations with PTY SCAN Important: "PTY" must appear in the display. Press SCA. All of the stations in your current reception area offering the selected programme type will be scanned.
No station with "PTY-POP" can be found. The display shows "NO PTY" and automatically switches back to NDR3. NDR2 airs a "PTY-POP" programme. The radio will switch to the linked station NDR2 for the duration of the "POP" programme.
Traffic programme station reception with RDS-EON
The abbreviation "EON" stands for Enhanced Other Networks, which means that information is exchanged within a radio network. Many FM radio stations provide their service area with traffic messages at regular intervals. Along with their programmes, all traffic programme stations transmit a special carrier signal, which is decoded by your car radio. If this signal is identified, "TP" will appear in the display (Traffic Programme). In addition to these, there are also stations which do not actually transmit traffic information themselves, but by using RDS-EON it is possible for them to forward the traffic messages broadcast by another traffic programme station in the same radio network. If you want to have the priority for traffic announcements activated while listening to one of these stations (e.g. NDR3), "TA" must appear on the display panel. If a traffic announcement is broadcast, the radio will automatically switch to the linked traffic programme station (in this case, NDR2) for the duration of the message and return to the original programme (NDR3) afterwards.

Traffic announcement priority on/off
If the priority for traffic announcement programmes is activated, "TA" will light up in the display. To switch the priority on or off: Press the AFTA button. If you press AFTA while a message is being broadcast, this message will be interrupted. The unit will then switch back to the previous mode. The priority for other traffic messages remains active. Please note that several buttons have no function while a traffic announcement is broadcast.
Press the rocker switch or press a preset button which has a traffic programme station allocated to it. Alternatively: b) Switch off the priority for traffic announcements: Press TA. "TA" will disappear from the display.
Automatic seek tuning start (Cassette and CD changer mode)
If you leave the reception area for the traffic programme station you have tuned into while you are listening to a cassette or CD, the system will automatically start searching for a new traffic programme. If no such station is found within approx. 30 seconds, a warning beep will sound every 30 seconds. To switch the warning beep off, press TA button.

Warning beep

If you leave the reception area of the traffic programme station currently tuned into, you will hear a warning beep after approx. 30 seconds. This warning will also be emitted if you press a preset button for a station which does not send the traffic programme signal (TP). Switching the warning beep off a) Tune into another station offering traffic information:
Adjusting the volume for traffic announcements and the warning beep
Although this volume was preset at the factory, you can use the DSC function to alter the setting (see "DSC programming - TA VOL").
S.Tr/Rav/Rim RCM168/L.V. gb 40 13.05.2002, 13:00 Uhr

Cassette playback

Insert the tape into the slot with the open side showing to the right. Press SRC to select the tape deck mode. "CASSETTE" will appear in the display. The tape will play in the direction "TAPE 1". If a tape is already inside, press SCR to select "CASSETTE" mode. The tape will play in the direction last selected.

Repeat song titles

During tape playback press 4/RPT. "RPT" will light up in display field 3; "REPEAT-T" will appear briefly in display field 2. While the tape is rewinding, "REWIND-T" will appear in the display. The title playing will repeat until you press 4/RPT again. "RPT" will disappear from the display. Playback will now continue normally.

Reversing the tape

Press to change the tape direction during cassette playback from TAPE1 to TAPE2 or vice versa. At the end of the tape, the unit will automatically switch to the opposite side.

Tape type selection

If you are playing METAL or CrO2 cassettes, press MTL. "MTL" will then light up in display field 1.
To scan all of the songs on a tape, press SCA. "SCAN" will appear in the display. All of the titles on the tape in the tape deck will be scanned briefly one after the other. Press SCA again to switch the SCAN function off. The title currently playing will continue to play.

Skipping cassette titles

CPS stands for Cassette Program Search and allows you to skip over songs on the tape. The titles must, however, be separately by at least 3 seconds of blank tape. or During tape playback press either on the rocker switch to activate the CPS mode. "CPS FF" or "CPS FR" will appear in the display. Press the button / repeatedly to skip the corresponding number of titles in either direction.

Fast winding

Use the rocker switch to fast forward or rewind the tape during cassette operation: >> forward << rewind.

to eject the cassette.

S.Tr/Rav/Rim RCM168/L.V. gb 41 13.05.2002, 13:00 Uhr

Cassette eject

Cassettes which have been recorded with the DOLBY B NR system exhibit considerably less tape noise and higher dynamics. To play cassettes recorded using this system, press. will light up in display field 3.
DOLBY B NR (Noise reduction)*
The number of titles to be skipped will appear in the display and count down until the title selected has been reached. Press the button indicating the opposite direction or << >> to stop the function.
"FORWARD" or "REWIND" will light up in the display. Press the button indicating the opposite direction or / to stop the function. If you have activated "Radio Monitor ON", the unit will play the radio station last selected while the tape is winding. You can alter the Radio Monitor setting in DSC mode.

Cassette deck operation

CD changer operation
Traffic information during cassette playback

The Traffic Announcement function (priority for traffic programmes) makes it possible to listen to traffic information during cassette playback. If a traffic message is broadcast, cassette playback will be interrupted and you will hear the message. This function is active, if "TA" lights up in the display. Press AFTA briefly to activate TA.
* Dolby noise reduction system is manufactured under licence by Dolby Laboratories. The word Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Option: Saint Tropez RCM 168, Ravenna RCM 168, Rimini RCM 169. Included in delivery: Las Vegas DJ. If the CD changer is connected, the symbol will light up in the display. The changer is equipped with a magazine for 10 discs. Note: Use only perfectly circular CDs with a diameter of 12 cm. CDs with a diameter of 8 cm or CDs manufactured in the shape of a mug, for example, are not suitable for use with this equipment. Using such CDs can very likely result in the destruction of the CD and the CD drive. We assume no responsibility for damages caused by using unsuitable CDs. After you have inserted the magazine, keep the door closed to prevent the magazine from becoming dusty or dirty.

Ejecting CDs

Open the door of the CD changer and press the eject button.

CD playback

Press SRC to select the CD changer. Press SRC repeatedly until "CHANGER" appears in the display. CD playback starts with the first CD identified by the changer.

Selecting a CD

When CD playback starts, all active CD functions and the CD number or name will light up in the display. To change the display between CD Name, CD number, elapsed time indication and clock, press during CD playback.

Inserting CDs

Insert one or several CDs into the magazine (printed surface facing up). Slide the magazine into the CD changer in the direction of the arrow. The CDs are counted from bottom to top. 42
S.Tr/Rav/Rim RCM168/L.V. gb 42 13.05.2002, 13:00 Uhr

CD selection

Up Down
The name or number of the CD currently playing will appear.

TA VOL

CDC NAME Names CDs.A maximum of 99 CDs can be given names of up to 7 characters. CLOCK 24 Switches between 12-h and 24-h clock display.
CLOCKSET Sets the clock manually. Press << >> to select hours/minutes. Press / to adjust the flashing value. TIMER Switches on a selected radio station at a selected time. Sets the turn-on volume. Press << >> to adjust the turn-on volume as desired. Changes the mute volume. Changes the volume of the acknowledgement tone (beep) between 0 and 9. (0 = off)

ON VOL

/ Select function << >> Adjust/recall value

MUTE BEEP

S.Tr/Rav/Rim RCM168/L.V. gb 46 13.05.2002, 13:00 Uhr
Radio Monitor If the Radio Monitor function is active during fast winding of the tape, the unit will switch to the radio and play the station listened to last. Use this function to set the scan time for the radio or CD player from 5 to 20 seconds. Switches the Blank Skip function off and on; there must be at least 10 seconds of blank tape between songs. Select AUX-ON if you wish to connect a Discman or Walkman instead of the CD changer. Switches the display on or off while the car radio is turned off.
Overview of the DSC factory settings
LOUDNESS BAS CENT TA VOL REG SENS CDC NAME CLOCK CLOCKSET TIMER ON VOL MUTE BEEP RM SCANTIME BL SKIP AUX DISP 3 Hz OFF DX1 CLOCK 24 OFF 3 ON 10 seconds ON OFF OFF

Amplifier

Output power: 4 x 25 W RMS power acc. to DIN 45324 at 14.4 V 4 x 40 W max. power
Wavebands: FM : MW : LW : 87.5 - 108 MHz 531 - 1602 kHz 153 - 279 kHz 35 - 16000 Hz

SCANTIME

FM frequency response:

Cassette

Frequency response: 30 - 18000 Hz
Optional: Saint Tropez RCM 168, Ravenna RCM 168, Rimini RCM 169 Included: Las Vegas DJ This equipment offers you convenient control of a Blaupunkt CD changer CDC-A 08 or CDC-A 072. Subject to modification! 47

DISPLAY

BL SKIP

Specifications

Blaupunkt-Werke GmbH

Bosch Gruppe

12/98 Wg K7/VKD 401 836