Radio / Cassette / Changer

San Diego DJ A

Operating instructions

San Diego DJ-A d

03.06.2002, 11:47 Uhr
San Diego DJ-A d 2 03.06.2002, 11:47 Uhr
Quick reference.. 22 Important notes.. 26
Precautions.. 26 Traffic safety... 26 Installation.. 26 Accessories.. 26
Antitheft protection.. 27
Entry of a wrong code number. 27 Switching on security coding. 27 Re-start following an interruption of the power supply.. 27 Switching off security coding. 28 Detachable face. 28 Detaching the face.. 28 Attaching the face.. 28
Receiving traffic programme stations with RDS-EON. 32
Traffic announcement priority on/off. 32 Beep tone.. 32 Switching off the beep tone.. 32 Automatic seek tuning start (tape and CD changer operation). 32 Adjusting the volume for traffic announcements and the beep tone. 33
Overview of DSC factory settings. 38

Appendix.. 39

Specifications.. 39 Blaupunkt telephone hotline.. 39
Selecting the audio mode. 28 Radio operation with RDS. 29
AF - Alternative frequency.. 29 REG - regional programme. 29 Selecting a waveband. 29 Station tuning.. 30 Automatic tuning /.. 30 Manual tuning with << >>. 30 Scrolling through the broadcast networks (only FM). 30 Changing the memory bank (FM). 30 Storing stations.. 30

Tape operation.. 33

Inserting a tape.. 33 Ejecting a tape.. 33 Fast winding.. 33 Reversing the tape. 34 Listening to the radio during fast tape winding with RM (Radio Monitor). 34 Care notes.. 34
San Diego DJ-A gb 21 03.06.2002, 11:51 Uhr

PORTUGUS

ESPAOL

SVENSKA

NEDERLANDS

ITALIANO

FRANAIS
Automatically storing the strongest stations with Travelstore.. 31 Recalling stored stations.. 31 Scanning stored stations with Preset Scan.. 31 Selecting the seek tuning sensitivity. 31 Stereo - mono switching.. 31 Loudness... 31

CD changer operation. 35

Switching to the CD changer mode. 35 Selecting CDs and titles.. 35 MIX playback.. 35 Selecting the display mode. 36 SCAN.. 36

DSC programming.. 37

ENGLISH

DEUTSCH

Contents

Quick reference

1 Switching on/off with the ON button: Press ON. The unit will play at the preset volume. If the unit is switched off, a double beep tone will remind you that you should remove the detachable face before leaving your vehicle. Switching on when the ignition is switched off: To keep on operating the set when the ignition is switched off: Press ON. The unit will be turned on. To save battery power, the system will be turned off automatically after one hour of playback. Extra function of ON button You can instantly turn down the volume by pressing ON briefly. MUTE will appear. The volume will be set to VOL 0. The function is cancelled by pressing ON or VOL+ briefly. If VOL- is pressed, the mute volume will be adopted. 2 VOL+ / VOLTo alter the volume. Each time you switch the unit on, it will play at the preset volume (VOL FIX). You can also change the VOL FIX setting (see DSC programming). 3 AUD To adjust the treble, bass, balance and fader. If the display shows TRE or BAS, you can adjust the playback of the treble and bass frequencies using the rocker switch. If BAL or FAD is displayed, you can set the balance (left/ right) and fader (front/rear). Press AUD as many times as required and make the setting using the rocker switch.

Note: Read the information in the section on Theft protection system. Switching on/off via the ignition: If connected accordingly, the set can also be turned on and off with the vehicle ignition.
Treble + / Fader front Treble / Fader rear Bass / Balance left Bass + / Balance right
The last setting will be stored automatically. To switch off AUD: Press button once again. If you do not change the setting within 8 seconds, the display will switch back to the previous condition. 22
San Diego DJ-A gb 22 03.06.2002, 11:51 Uhr
San Diego DJ-A gb 23 03.06.2002, 11:51 Uhr
On FM only: <</>> To scroll through the station networks when AF is on, e.g. NDR 1, 2, 3, 4, N-JOY, FFN, ANTENNE.
Extra functions of rocker switch: Further settings are possible with AUD 3 DSC-Mode 7 Important: The corresponding function has to be activated.
<</>> Up/down in short intervals (on FM only if AF is off)
Extra function AUD Loudness - When the system is played at a low volume level, the Loudness function creates a more natural sound by boosting the low frequency range. Loudness on/off: Press AUD for approximately 1 sec. LD lights up in the display, if the Loudness function is switched on. Please refer to DSC programming for more information on how to program the Loudness boost.

4 Rocker switch

Changer operation
CD selection Up Down Title selection Upwards: Press briefly. CUE - fast advance (audible): Keep depressed. Downwards: Press as many times as required. To re-start a title: Press briefly. REVIEW - fast reverse (audible): Keep depressed.

Radio operation

/ Automatic tuning Up Down

5 Display

a d ef
6 TS / BND To select the wavebands FM, MW (AM) and LW (L) as well as the FM memory banks I, II and T (Travelstore). To switch over: Press button as often as required. The selected mode appears in the display. Travelstore To store and recall the five most powerful stations with Travelstore. To store: Press button for approximately 1 sec. until you hear a beep and T-STORE appears in the display. To recall: Select the memory bank T and press the corresponding preset button (1-5) briefly. Note: The MW and LW band is available only if AM ON has been selected in the DSC menu. 7 DSC (Direct Software Control) Use the DSC function to customise certain programmable, basic settings to suit your personal needs and preferences. See DSC programming for more information.
8 SC / SRC SRC (source) Press SC/SRC briefly You can switch between the radio, tape and CD changer audio sources (if a tape/CD is inserted). Radio operation SC - Preset Scan Press SC/SRC for approximately 1 sec. until you hear a beep. SCAN and the name or frequency of the scanned station will appear alternately in the display. The unit will scan all of the stations stored on the preset buttons. To stop Preset Scan: Press SC/SRC again for approximately 1 sec. Changer operation SC - CD-Scan Press SC/SRC for approximately 1 sec. CDC-SCAN will appear in the display. The CD titles are scanned briefly. To stop CD-Scan: Press SC/SRC again for approximately 1 sec.

a) NDR1 NDS - Station name b) TR 1 - Track (side) 1 of the cassette c) 1:52 - Playback time and number (CD number and track) during changer operation d) FM - Waveband e) l, II, T - Memory bank I, II or Travelstore f) 5 - Preset button (1-5) g) lo - Seek tuning sensitivity h) AF - Alternative frequency for RDS operation i) TP - Traffic station is received j) TA - Priority for traffic stations k) LD - Loudness is activated
San Diego DJ-A gb 24 03.06.2002, 11:51 Uhr
: 1, 2, 3, 4, 5 - preset buttons On FM, you can store five stations on each of the memory banks I, II and T. On MW/LW, you can also store five stations each. To store a station: Press a preset button during radio operation and hold it down until the set resumes play after the muting and you hear a beep. To recall a station: Select the desired waveband. On FM, adjust the corresponding memory bank and press the relevant preset button briefly.
San Diego DJ-A gb 25 03.06.2002, 11:51 Uhr
< Cassette loading slot Insert the tape with side A or 1 facing up, the open side showing to the right.
Fast winding FR : fast rewind, press FF to stop FF : fast forward, press FR to stop
Reversing the tape Press both buttons at a time. TR 1 or TR 2 will be displayed.
AF - Alternative frequency during RDS operation: If AF lights up in the display, the system will automatically seek a frequency offering better reception for the same RDS programme. AF on/off: Press AF/TA for approximately 1 sec.
; Reversing the tape / Fast winding
> REL (releasing the detachable face) The face of this unit can be detached for extra antitheft protection. You should take the detachable face with you when you leave your car. Detaching the face: Press REL. Attaching the face: Apply the right hand side of the face to the chassis first and then gently push the left side of the face against the front of the chassis until it snaps into place.
9 AF /TA TA (Traffic Announcement) If TA lights up in the display, the system will play traffic stations only. Priority on/off: Press AF/TA briefly.

Extra function of preset buttons Coding: Please read first the information in the section on Theft protection. Button 1, 2, 3, 4 - to enter the four-digit code number. Press each button as many times as necessary until the four-digit code noted in your car radio pass appears in the display.
= Cassette ejection Press.

Important notes

Precautions
Before using your new car radio, please read the following information carefully.

Installation

If you would like to install your new car radio yourself or add other audio components to existing ones, then please read the enclosed instructions on installation and connection carefully. In order to ensure that the set operates properly it is necessary for the positive power supply line to be connected to the ignition and the permanent +12 V lead. Do not ground the loudspeaker outputs!

Traffic safety

Traffic safety always has the highest priority. As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation at all times. Never use your car radio in a way that could distract you. Please keep in mind that you travel a distance of 14 m per second at a speed of only 50 km/h. Should the traffic situation become particularly demanding, we advise you not to use the radio. Always make sure that you are still able to hear any warning signals coming from outside of the vehicle, such as police or fire engine sirens, so that you can react accordingly. Therefore, you should always select a moderate volume for playing your car radio while you are driving.

Accessories

Use only the accessories and spare parts approved by Blaupunkt.
San Diego DJ-A gb 26 03.06.2002, 11:51 Uhr
This car radio is supplied with inactive code protection. In order to switch the security coding system on, proceed as described on the following pages. If the coding system is active while the power supply to the system is interrupted (e.g. theft, disconnection of the car battery), the set will be electronically blocked. In such a case it can only be made operable again by entering the correct code number given in the car radio pass.
Entry of a wrong code number
It should not be possible for a thief to find out the correct code number by trial and error. This is why the set will be blocked for a certain period of time after a wrong code number has been entered. The display will show CODE ERR and then WAIT. After the first three unsuccessful attempts, the system will shut down for 10 sec.; after further attempts, the waiting time extends to one hour. After 19 unsuccessful attempts, the display will show OFF. In this case you can no longer restart the unit.

To activate the coding system: Turn off the radio. Press and hold down preset buttons 1 and 4 simultaneously, and switch the set on. CODE will appear. Release preset buttons 1 and 4.
The display will briefly show CODE each time the set is turned on.
San Diego DJ-A gb 27 03.06.2002, 11:51 Uhr
Enter the code number given in the Blaupunkt car radio pass and confirm your entry as described in Restart. Now the security coding system is active.
Switching on security coding
Note: Keep your car radio pass with the code number in a safe place in order to avoid unauthorised access to your car radio. If the security code system is activated, the unique code must be entered each time the power supply was interrupted. The radio will be operable again as soon as you have entered the correct code. If you have lost your radio pass and forgotten the code number, your radio can only be restarted by one of our authorised service workshops. This is a chargeable service.
Turn on the radio. The display shows CODE. Briefly press preset button 1; the display shows 0000. Enter the code number given in the Blaupunkt car radio pass:
Example: The code number is 2521. - Press preset button 1 twice; the display shows 2000. - Press preset button 2 five times; the display shows 2500. - Press preset button 3 twice; the display shows 2520. - Press preset button 4 once; the display shows 2521. To confirm the code number: Press the rocker switch >. If you have entered the correct code, the unit will now be ready for use. However, if the display shows CODE ERR and then WAIT, you have entered a wrong number. The unit will switch off when the waiting time has elapsed. Turn it on again and re-enter the correct code. If you switch off the set while it is blocked, the waiting time will start to count from zero again as soon as the radio is turned back on.
Re-start following an interruption of the power supply (coding system is activated)

Antitheft protection

Selecting the audio mode
Switching off security coding
Turn off the radio. Press and hold down preset buttons 1 and 4 simultaneously, and switch the set on. CODE will appear. Release preset buttons 1 and 4. Detaching the face Press the REL button. The unit will be switched off automatically. The control panel will be released in order for you to remove it. Attaching the face First, apply the left hand side of the face to the chassis. Using the SC/SRC button you can switch between radio, tape and CD changer operation. Tape/CD changer operation is only available if a cassette/CD is inserted. To switch to another source, press SC/SRC briefly.

Now enter the code number given in the car radio pass and confirm your entry (see example in Re-start.). Security coding is now switched off.

Detachable face

This unit is equipped with a detachable face. You can remove the control face at a push of the REL button. In order to prevent the unit from being stolen, we recommend you to take the detachable face with you when you leave your car. When you carry the face with you, put it in the enclosed carrying case. Re-inserting the face is childs play. The set will be ready for use immediately and you will find all of your previous settings re-adjusted.
Second, gently push the right side of the face against the front of the chassis until it snaps into place. The unit is now ready for use with the settings selected before the face was removed.
San Diego DJ-A gb 28 03.06.2002, 11:51 Uhr
AF - Alternative frequency
The AF (Alternative Frequency) function makes sure that the strongest frequency of the currently selected programme is always tuned in automatically. This function is activated if AF appears in the display. In order to switch this function on or off, press the AF/TA button for approximately 1 sec.
San Diego DJ-A gb 29 03.06.2002, 11:51 Uhr
Certain radio programmes are split up at times into regional programmes offering local information. The 1st programme broadcast by NDR, for example, offers programmes with different contents in the northern states of Germany Schleswig-Holstein, Hamburg and Lower Saxony at certain times of the day. If you have tuned to a regional programme, you can select between REG ON and REG OFF: REG ON the radio keeps tuned to the current regional programme, even if the reception quality is getting poorer.
Note: In the DSC menu you can deactivate the station selection on either MW or LW or for both wavebands at the same time. This has the advantage that only the required bands can be activated, so that you must press the TS/BND button less often. For more information, please refer to DSC programming - AM ON or AM OFF.
The Radio Data System offers you more convenience when you listen to FM radio stations. More and more radio stations have begun to broadcast RDS information along with their programmes. As soon as a programme has been identified, the station name including a regional identifier, if applicable, will appear in the display, for example, NDR1 NDS (regional programme in Lower Saxony, Germany). If RDS is activated, the preset buttons become programme buttons. You now know exactly which programme you have tuned into, making it easy to find the desired station quickly. But RDS also offers you further advantages:

REG - regional programme

FM 87.5 - 108 MHz MW (AM) 531 - 1602 kHz LW (L) 153 - 279 kHz Press the TS/BND button until the desired waveband shows on the display panel.

While searching for the strongest reception signal, the radio may switch to mute briefly. If SEARCH appears in the display when you switch the radio on or when you recall one of the stored frequencies, the unit is automatically searching for an alternative frequency. SEARCH will disappear from the display when the alternative frequency has been found or after the frequency band has been run through completely. If the sound quality of the selected programme deteriorates appreciably: Tune into another station.
REG OFF the radio automatically tunes to the regional programme offering the best reception quality (but maybe with local information for another service area). If the REG function is active, REG ON will be briefly displayed each time you turn the radio on.

Selecting a waveband

You can select between the following wavebands:
Radio operation with RDS (Radio Data System)

Station tuning

Automatic tuning / Press / ; the car radio will automatically search for the next station. If you hold down the upper or lower part / of the rocker switch, seek tuning will speed up in the upwards or downwards direction.
Manual tuning: Press << >>; the frequency will change in short intervals in the downwards or upwards direction. If you hold down the right or left part of the rocker switch, the frequency scan will speed up.
Changing the memory bank (FM)
You can shift between the memory banks I, II and T in order to store stations and recall them later. The currently selected memory bank is indicated in the display. Press the TS/BND button as many times as necessary until the desired memory bank lights up in the display.
Scrolling through the broadcast networks (only FM)
You can use the << >> buttons to tune in stations of your reception area. If several programmes of the broadcast networks can be received, you can scroll through them forwards by pressing >>, or backwards using the << button, e.g. NDR 1, 2, 3, 4, N-JOY, FFN, ANTENNE. For this it is necessary that the stations have been tuned in at least once and that AF is active (lights up in the display). For this purpose, start automatic tuning, e.g. using Travelstore: Press TS/BND for 1 sec.; the system starts to run through the frequency band. The display shows T-STORE. If AF does not light up, Press AF/TA for approximately 1 sec. This fulfils the requirements for selecting stations with << >>.

Storing stations

On FM, you can store five stations on the preset buttons 1, 2, 3, 4, 5 for each of the memory banks I, II and T. On MW/LW, you can also store five stations each. Select the desired memory bank with TS/BND. Tune in a station with the rocker switch (either automatically or manually).
Automatic tuning Up Down Down in short intervals (if AF is off) Up in short intervals (if AF is off)
Manual tuning with << >> You can also tune in a station manually. Condition: AF must be switched off (i.e. the symbol does not light up in the display). If necessary, deactivate AF: Press AF/TA for approximately 1 sec.

Press and hold down the desired preset button until the radio resumes play after the muting (takes approximately 1 sec., confirmed by a beep). Now the station has been stored. The activated preset button is indicated in the display.
San Diego DJ-A gb 30 03.06.2002, 11:52 Uhr
Scanning stored stations with Preset Scan
You can have all of the stored stations briefly scanned. To start Preset Scan: Press SC/SRC for approximately 1 sec. until SCAN appears in the display. All of the stored stations to be received in the selected waveband will be scanned one after the other. On FM, the radio will either scan the stations stored on memory bank I and II or T. To select a scanned station and switch off Preset Scan: Press SC/SRC for about 1 second. Note: If TA shows on the display panel, the system will scan the stored traffic stations only.
Recalling stored stations
You can recall any stored station at the touch of a button. Select the memory bank with TS/BND.
Selecting the seek tuning sensitivity
You can alter the automatic seek tuning sensitivity. If lo is displayed, the radio will only pick up strong, local stations.
San Diego DJ-A gb 31 03.06.2002, 11:52 Uhr
To turn Loudness on/off: Press AUD for about 1 second. LD appears in the dislay, if the Loudness function is activated. For more information please refer to DSC programming.
You can automatically store the five most powerful FM stations of your current reception area sorted according to their signal strength. This function is particularly convenient on longer trips. Press the TS/BND button for 1 sec. T-STORE will appear in the display. The five strongest FM stations will be automatically stored on the memory bank T (Travelstore). When this process has been completed, the radio will play the first station stored on preset 1. If desired, stations can also be stored manually on the Travelstore bank (see Storing stations).
If the system is played at a low volume level, the Loudness function creates a more natural sound by boosting the low frequency range.

Loudness

The radio will only play in stereo if the stereo quality of the received station signal is sufficient. When the signal strength gets poor, the radio will gradually switch to mono. You can select between stereo or mono sound in the DSC menu. For more information, refer to chapter DSC programming STEREO/MONO. Each time the radio is switched on, stereo sound is activated automatically.
Automatically storing the strongest stations with Travelstore

Stereo - mono switching

Note: Should you tune in a station which has already been stored before, then the corresponding preset position and memory bank will briefly flash in the display.

Press the corresponding preset button briefly to recall the station.
If lo does not light up, the radio will also pick up weaker, distant stations. Should you wish to alter the seek tuning sensitivity, refer to chapter DSC programming LO/DX.
Receiving traffic programme stations with RDS-EON
The abbreviation EON stands for Enhanced Other Networks, meaning the exchange of information within a radio network. Many FM broadcasters offer traffic messages for their service area at regular intervals. All traffic programme stations transmit a special carrier signal along with their programmes, which is decoded by your car radio. If this signal is identified, TP will appear in the display (Traffic Programme). In addition to these, there are also stations which do not actually transmit traffic programmes themselves, but by using RDSEON they make it possible to receive the traffic messages broadcast by another traffic programme station in the same radio network. If you wish to have the priority for traffic announcements activated while listening to one of these stations (e.g. NDR3), TA must appear on the display panel. If a traffic announcement is broadcast, the radio will automatically switch to the linked traffic programme station (in this case, NDR2) for the duration of the message and return to the original programme (NDR3) afterwards.
Traffic announcement priority on/off
If the priority for traffic announcement programmes is activated, TA will light up in the display. To switch the priority on or off: Press the AF/TA button. If AF/TA is pressed while a message is broadcast, this message will be interrupted. The unit will then switch back to the previous condition. The priority for all other traffic messages remains active. Please note that several buttons have no function while a traffic announcement is broadcast.
Switching off the beep tone a) Tune into another station offering traffic information: Press the rocker switch or press a preset button which has a traffic programme station allocated to it. Alternatively: b) Switch off the priority for traffic announcements: Press AF/TA. TA will disappear from the display.
Automatic seek tuning start
(tape and CD changer operation) When you leave the reception area of the tuned in traffic programme station while listening to a tape or CD, the system will automatically start searching for a new TA programme. If no such station is found within approximately 30 seconds, tape operation will be stopped and a beep tone will sound. To switch off the beep tone proceed as described above.

Beep tone

If you leave the reception area of the traffic programme station currently tuned into, you will hear a beep tone approximately every 30 seconds. This tone will also be released if a preset button is pressed which has no traffic programme allocated to it.

San Diego DJ-A gb 32 03.06.2002, 11:52 Uhr
This volume was preset at the factory, though you can alter the value using the DSC function (see DSC programming, TA VOL). If the volume level is altered while a message is played, this will only affect the current announcement.

Inserting a tape

Turn on the set. Insert a tape. Track A or 1 will be played. During tape operation, TR 1 or TR 2 (track) will appear in the display.
Insert the tape with side A or 1 facing up, the open side showing to the right.

Ejecting a tape

Press. The cassette will eject.
Fast winding FR : fast rewind - press FF to stop. FF : fast forward - press FR to stop.
San Diego DJ-A gb 33 03.06.2002, 11:52 Uhr
Reversing the tape Press both buttons at a time. TR 1 or TR 2 will appear in the display.
Fast rewind Press FR (fast rewind). At the beginning of the tape the unit will start playback automatically. To stop fast rewind press FF.
Adjusting the volume for traffic announcements and the beep tone
The car stereo has to be switched on. The unit will automatically switch to tape operation when inserting a cassette.

Fast winding

Fast forward Press FF (fast forward). At the end of the tape the unit will automatically reverse the direction and start playing the other side. To stop fast forward press FR.

Tape operation

Reversing the tape
To switch to the other side of the tape during playback, press FR and FF simultaneously. At the end of the tape the unit will automatically reverse to the other side (autoreverse). The display shows TR 1 for track (side) 1 or TR 2 for track 2. Notice: If there is too much tension on the tape during playback, the set may reverse the direction by itself before having reached the end of the tape side. In this case check the condition of the cassette tape. Sometimes it helps to rewind it completely.

Care notes

To avoid possible problems, we recommend you to use C-60/C-90 type cassette tapes only. Store your tapes in a cool place away from dirt, dust and temperatures exceeding 50 Celsius. Allow very cold tapes to warm up before playing them in order to avoid uneven tape transport. After approximately 100 hours of use, dust particles collected on the playback head or roller may lead to tape run problems and sound distortions. Use a head cleaning tape to remove normal dirt build-up. For tougher cases, use a cotton swab (Q-Tip) dipped in alcohol. Do not attempt to clean by inserting a hard object into the player!

Listening to the radio during fast tape winding with RM (Radio Monitor)
During fast winding of the tape, i.e. when the radio is normally muted, you can use the RM function to listen to the radio. For more information please refer to chapter DSC programming RM ON/OFF.
San Diego DJ-A gb 34 03.06.2002, 11:52 Uhr
The changer is included in the scope of delivery. Note: Use only perfectly circular CDs. CDs manufactured in the shape of a butterfly or a beer mug, for example, are not suitable for use with this equipment. Using such CDs can very likely result in the destruction of the CD and the CD drive. We assume no responsibility for damages caused by using unsuitable CDs.

Selecting CDs and titles

MIX playback
You can have the CD tracks played in random order. Select the desired MIX mode in the DSC menu. MIX CDC The MIX mode is active: The individual discs and the titles of the selected CD are chosen randomly. After all titles have been played, the next CD will be selected at random again. Use to select a CD title in random order. MIX OFF The Mix function is deactivated. Discs and titles will be selected in numeric order. To change the MIX mode: Press DSC. Select MIX using the rocker switch / and adjust with << >>. If the function is active, CDC MIX will be briefly displayed every time CD changer operation is activated.
Switching to the CD changer mode
Make sure that at least one CD has been inserted into the magazine. Use SC/SRC to toggle the audio source: Press SC/SRC repeatedly until CDC appears briefly in the display.
San Diego DJ-A gb 35 03.06.2002, 11:52 Uhr

CD changer operation

Selecting the display mode
You can select the desired display mode for CD playback: NUMBER The CD and track number, such as CD08 T02 is displayed. The elapsed playback time of the current title is displayed, for example 2:32.
Use this function to scan all of the CD tracks. To start the Scan function: Press SC/SRC for approximately 1 second. The titles will be scanned one after the other in ascending order. To stop the Scan function: Press SC/SRC for approximately 1 second. The track currently scanned is continued to be played. SCAN will also be terminated by pressing one of the buttons AUD, DSC, << >> or /.
To switch the display mode: Press DSC. Use the rocker switch / to select CDC DISP. Use << >> to adjust to NUMBER or TIME.

San Diego DJ-A gb 36 03.06.2002, 11:52 Uhr

/ << >>

Select function Adjust/recall value
San Diego DJ-A gb 37 03.06.2002, 11:52 Uhr
RM ON/OFF (Radio Monitor) (RM ON/OFF appears only in the cassette mode) Allows you to listen to the radio during fast winding of the tape. RM ON Radio playback activated RM OFF Function deactivated
Acknowledgement tone for all of the functions which require a button to be pressed for more than 1 second. The volume can be set from between 0 to 9. (0 = off)
Press DSC. Use the rocker switch to select and adjust the functions described in the following. The display will show you the adjusted condition.
REG ON/OFF REG ON regional function is switched on. REG OFF regional function is switched off. Refer to Radio operation with RDS / REG - regional programme.
DSC (Direct Software Control) allows you to customise certain programmable, basic settings to suit your personal needs and preferences and then store them. The basic settings for this audio equipment were made at the factory. In the following you can find an overview of these settings, so that you can always reset to these if desired. If you wish to alter any of the programming, press SCA/SRC to select one of the operating modes radio, cassette or CD changer (cassette/CD must be inserted).
MIX OFF The MIX function is switched off.
AUX ON/OFF Please note that this item will not appear if you have connected a CD changer. Default setting: AUX OFF. Adjust to AUX ON if you have connected an external piece of equipment to the AUX socket.
(For changer operation only) MIX CDC CD selection at random. All titles of this disc will be chosen in random order as well. The next disc is again selected at random.

VOL FIX

Use this function to select the volume at which the radio is set when it is switched on. Adjust the desired volume level with << >>. If VOL 0 is set, the system will come on with the volume selected before switching it off.

DSC programming

TA VOL
To adjust the traffic announcement and beep tone volume from between 0 to 63. The message will then come through at this volume, if the volume set for the program is lower. If the program volume is higher than the TA VOL level, the traffic report will be played slightly louder.

Radio / Cassette
San Diego DJ I Windsor RCM 127

Operating instructions

S. Diego DJ-I/Winds d

25.02.2000, 16:27 Uhr

S. Diego DJ-I/Winds d 2 25.02.2000, 16:27 Uhr
Quick reference.. 22 Important notes.. 26
Precautions.. 26 Traffic safety... 26 Installation.. 26 Accessories.. 26 Second KeyCard.. 26
KeyCard theft protection system 27
Putting the unit into operation. 27 Removing the KeyCard. 27 Training a second KeyCard/ Replacing a KeyCard.. 27 Displaying the radio pass data. 27 Short Additional Memory (S.A.M.). 28 Turn On Message (T.O.M.). 28 Optical indication of anti-theft protection... 28 Care of your KeyCard.. 28
Receiving traffic programme stations with RDS-EON. 32
Traffic announcement priority on/off. 32 Beep tone.. 32 Switching off the beep tone. 32 Automatic seek tuning start (tape and CD changer operation). 32 Adjusting the volume for traffic announcements and the beep tone. 33
Radio operation with RDS. 29
AF - Alternative frequency.. 29 REG - regional programme. 29 Station tuning.. 29 Automatic tuning /.. 29 Manual tuning with << >>. 29

Cassette operation.. 33

Inserting a tape.. 33 Ejecting a tape.. 33 Fast winding.. 33 Reversing the tape. 33 Listening to the radio during fast tape winding with RM (Radio Monitor). 34 Care notes.. 34
S. Diego DJ-I/Winds gb 21 03.06.2002, 10:55 Uhr

PORTUGUS

ESPAOL

SVENSKA

Selecting the audio source. 28

NEDERLANDS

ITALIANO
Scrolling through the broadcasting networks.. 30 Changing the memory bank.. 30 Storing stations.. 30 Automatically storing the strongest stations with Travelstore.. 30 Recalling stored stations.. 30 Scanning stored stations with Preset Scan.. 31 Selecting the seek tuning sensitivity. 31 Stereo - mono switching.. 31 Loudness... 31

CD changer operation. 35

Switching to the CD changer mode. 35 Selecting CDs and titles.. 35 MIX playback.. 35 Selecting the display mode. 36 SCAN.. 36
Overview of DSC factory settings. 38

Specifications. 39

Blaupunkt telephone hotline.. 39

FRANAIS

DSC programming.. 37

ENGLISH

DEUTSCH

Contents

Quick reference
1 On Off Volume When switching the set on with the knob, the KeyCard has to be inserted. The unit will play with the preadjusted volume. Switching on with the ignition being switched off: To keep on operating the set when the ignition is switched off (KeyCard is inserted), proceed as follows: Turn the knob to switch the unit off, wait for about 2 seconds and turn it on again. To avoid that the battery goes flat, the system will be turned off automatically after one hour of playback. 2 SCA / SRC Radio operation SCA Preset Scan Press SCA/SRC for about 1 second The stations stored on the preset buttons will be scanned. The indicators for the waveband, memory bank and preset button will flash in the display. To stop Preset Scan: Press SCA/SRC again for about 1 second. Changer operation SCA (Source) Press SCA/SRC briefly You can switch between the radio, cassette and CD changer mode, if a cassette/CD is inserted. CD-Scan Press SCA/SRC for approximately 1 second CDC-SCAN will appear in the display. The CD titles are scanned briefly. To stop CD-Scan: Press SCA/SRC once again for approximately 1 second. 3 TS / FM Selector key to access the FM memory banks I, II and T. To switch over: Press TS / FM as many times as required. Travelstore To store and recall the five most powerful stations with Travelstore.

Switching on/off with the KeyCard: The set has to be turned on with the knob. Notice: Read the information in chapter KeyCard theft protection system. Switching on/off via the ignition: When connected correspondingly, the set can also be turned on and off with the vehicle ignition. After the ignition has been switched off, a double beep tone will remind you that you should remove the KeyCard before leaving your vehicle.
S. Diego DJ-I/Winds gb 22 03.06.2002, 10:55 Uhr
To store: Press button for approximately 1 sec. until you hear a beep and T-STORE appears in the display. To recall: Select the memory bank T and press the corresponding preset button (1-5) briefly. 4 Cassette ejection Press. 5 Cassette loading slot Insert the tape with side A or 1 facing up, the open side showing to the right. 6 Reversing the tape / Fast winding
Reversing the tape Press both buttons at a time. TR1 or TR2 will be displayed.
TA (Traffic Announcement = priority for traffic stations) If TA is displayed, the radio will play traffic stations only. Priority on/off: press button briefly. 8 1, 2, 3, 4, 5 - preset buttons You can store five stations for each of the memory banks I, II and T. To store a station: Press a preset button during radio operation and hold down until the set resumes play (beep). To recall a station: Select the desired memory bank and press the relevant preset button briefly.
S. Diego DJ-I/Winds gb 23 03.06.2002, 10:55 Uhr
Fast winding FR : fast rewind, press FF to stop FF : fast forward, press FR to stop
Flashing KeyCard tongue When the radio is turned off and the KeyCard removed, the KeyCard tongue can be programmed to flash for optical theft protection. For more information see chapter DSC programming. This flashlight can be switched off by pushing in the tongue and lock. WRONG KC will briefly appear on the display and the set will switch off automatically.
Inserting the KeyCard With the KeyCard tongue sticking out of the unit, introduce the KeyCard into the slot with the contact area showing up. To remove the card, press first to unlock. Read also the information in chapter KeyCard theft protection system.
7 AF / TA AF Alternative frequency in RDS mode: When AF is displayed, the radios RDS module is searching for a frequency offering the same programme in a better quality. AF on/off: press button for about 1 second.

9 KeyCard theft protection system To operate the set it is necessary that the KeyCard is inserted.

KeyCard

: Display

; Rocker switch

Changer operation

CD selection

a d ef g h i j

Up Down Title selection

Radio operation
Upwards: Press briefly. CUE - fast advance (audible): Keep depressed. Downwards: Press as many times as required. To re-start a title: Press briefly. REVIEW - fast reverse (audible): Keep depressed.

Station search Up Down

a) NDR1 NDS - Station name b) TR 1 - Track (side) 1 of the cassette c) 1 : 52 - Playback time and number (CD number and track) during changer operation d) FM - Waveband e) I, II, T - Memory bank I, II or Travelstore f) 5 - Preset button (1-5) g) AF - Alternative frequency for RDS operation h) TP - A traffic station is being received i) TA - Priority for traffic stations j) LD - Loudness on
<</>> Up/Down in short intervals (on FM only if AF is off) On FM only: <</>> To scroll through the station networks when AF is on, e.g.NDR 1, 2, 3, 4, N-JOY, FFN, ANTENNE.
Extra rocker switch functions: Further setting functions with AUD < DSC Mode < Condition: The corresponding function is activated.
S. Diego DJ-I/Winds gb 24 03.06.2002, 10:55 Uhr
Treble + / Fader front Treble / Fader rear Bass / Balance left Bass + / Balance right
S. Diego DJ-I/Winds gb 25 03.06.2002, 10:55 Uhr
The last setting will be stored automatically. To switch off AUD: Press button briefly again. If the setting remains unchanged within 8 seconds, the display will switch back to the previous condition.
= DSC (Direct Software Control) Use the DSC function to customise certain programmable, basic settings to suit your personal needs and preferences. See chapter DSC programming for more information.
< AUD To adjust the treble, bass, balance and fader. If the display shows TRE or BAS, you can adjust the reproduction of the treble and bass frequencies with the rocker switch. If BAL or FAD is displayed, you can set the balance (left/ right) and fader (front/rear). Briefly press AUD as many times as required and make the setting using the rocker switch.

Extra function AUD Loudness - When listening at a low level, the Loudness function creates a more natural sound by boosting the low frequency range. Loudness on/off: Press AUD for approximately 1 sec. LD lights up in the display if the Loudness function is switched on. Please refer to chapter DSC programming for more information on how to program the Loudness boost.

Important notes

Precautions
Before starting to use your new car radio, please read the following information carefully.

Installation

If you would like to install your new car stereo yourself or add other audio components to existing ones, then please read carefully the enclosed instructions on installation and connection. In order to ensure that the set operates properly it is necessary that the positive power supply line is connected to the ignition and the permanent +12 V lead. Do not ground the loudspeaker outputs!

Second KeyCard

You can also operate your car radio with a second KeyCard. Refer to chapter KeyCard theft protection system for more information. You can purchase a second KeyCard at any specialised dealership.

Traffic safety

Traffic safety always has the highest priority. As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation at all times. Never use your car radio in a way that could distract you. Please keep in mind that you travel a distance of 14 m per second at a speed of only 50 km/h. Should the traffic situation become particularly demanding, we advise you not to use the radio. Always make sure that you are still able to hear any warning signals coming from outside of the vehicle, such as police or fire engine sirens, so that you can react accordingly. Therefore, you should always select a moderate volume for playing your car radio while you are driving.

Accessories

Use only the accessories and spare parts approved by Blaupunkt. Changer
San Diego DJ I: The changer is included in the scope of delivery. Windsor RCM 127: CDC A 06 or A 072 (directly) CDC A 05, CDC F 05 or A 071 (adapter cable is required)
S. Diego DJ-I/Winds gb 26 03.06.2002, 10:55 Uhr

This piece of equipment is supplied with one KeyCard, though you can also operate the set with a second KeyCard. If you have lost your KeyCard or if it was damaged, you can buy a second / extra card from your specialised dealer. When using a second KeyCard, the settings stored on the first card will be adopted. However, you can individually store the following functions: Bass, treble, balance and fader settings, Loudness, TA (traffic announcement volume), beep volume, lo or dx. In addition, the settings activated before switching the radio off, such as the station tuned in, TA priority, AF, AM ON/OFF and RM ON/OFF will also remain stored. This ensures that you will find your basic settings re-adjusted automatically as soon as you have inserted your KeyCard.

Removing the KeyCard

Never pull out the KeyCard directly! First, slightly push in the KeyCard. This releases the card and puts it in the proper position for being removed. Now you can pull it out.
Putting the unit into operation
Turn on the set. With the KeyCard tongue sticking out, introduce the KeyCard into the slot with the contact area showing up. The car radio is now ready for operation. If a wrong KeyCard is inserted, then CARD ERR followed by WAIT will appear in the display. In this case please do not make any further adjustments.
Press the DSC button and select LEARN KC with /.
Press << or >>. The display will switch to CHANGE. 27

S. Diego DJ-I/Winds gb

03.06.2002, 10:55 Uhr
While operating the unit with the first KeyCard, you can train a second one to be also used with the set: Insert the first KeyCard and turn on the set.
Training a second KeyCard/ Replacing a KeyCard
Displaying the radio pass data
Using the KeyCard supplied with your set you can have the radio pass data such as the model name, product number (7 6.) and serial number indicated on the display panel. Please refer to chapter DSC programming - READ KC.
The system will switch off after approximately 10 seconds. When inserting another card type (e.g. phone or credit card), the display will show WRONG KC for approximately 2 seconds. The set will switch off automatically. Remove the wrong card and introduce the correct KeyCard. Turn the knob to switch on the set.
Push in the KeyCard. The card is released and put in the proper position for being removed.
Remove the first KeyCard and insert the new one. After the display indication READY or LEARN KC, press DSC. Now you can also use the new KeyCard for operating your unit. A maximum of two cards can be used for the set. When trying to train a third one, the access authorisation for the KeyCard not used for the training process will be deleted automatically.
KeyCard theft protection system
Selecting the audio source
Short Additional Memory (S.A.M.)
Using the second KeyCard to be purchased at any specialised dealership, you can program a short text by selecting the DSC menu item READ KC. This text will be moved through the display and might be the telephone number of a car repair service or the emergency call number of your auto club. Any specialised dealer with the proper equipment can program the desired text with up to a maximum of 162 characters onto the KeyCard.

Optical indication of anti-theft protection
Flashing KeyCard tongue When the vehicle is stationary and the KeyCard removed, the KeyCard tongue can be switched to flash for extra anti-theft security. For this it is necessary that the positive power supply line and the permanent +12 V lead are connected such as described in the installation instructions. Be sure that LED ON is adjusted in the DSC mode. If required, please refer to chapter DSC programming - LED. Switching off the flashlight The flashlight can be switched off by pushing in the KeyCard and lock. If you would like to deactivate the flashing tongue with general effect, adjust the relevant item in the DSC menu to LED OFF.
Using the SRC button you can switch between radio, tape and CD changer operation. Tape/CD changer operation is only available if a cassette/CD is inserted. To switch to another source, press SCA/SRC briefly.

Turn On Message (T.O.M.)

Using the second KeyCard to be purchased at any specialised dealership, you can program the unit to display a selected Turn On Message after the set is switched on. Any specialised dealer with the proper equipment can program the desired text with up to a maximum of 48 characters onto the KeyCard. Each time you switch on your car radio using the second KeyCard, this text will appear in the display.

Care of your KeyCard

In order to ensure that the KeyCard always functions correctly, it is important for the contacts to be free from any foreign particles. Avoid direct skin contact. If necessary, clean the KeyCard contacts using a cotton swab dipped in alcohol.
S. Diego DJ-I/Winds gb 28 03.06.2002, 10:55 Uhr
AF - Alternative frequency
The AF (Alternative Frequency) function makes sure that the strongest frequency of the currently selected programme is always tuned in automatically. This function is activated when AF appears in the display. In order to switch this function on or off, press AF/TA for about 1 second. While searching for the strongest reception signal, the radio may switch to mute briefly.

Seek tuning Up Down << / >> Up/Down in short intervals (FM only, AF must be switched off)
Manual tuning with << >> You can also tune in a station manually. Condition: AF must be switched off (i.e. the symbol does not light up in the display). If necessary, deactivate AF: Press AF/TA for about 1 second.
S. Diego DJ-I/Winds gb 29 03.06.2002, 10:55 Uhr
The Radio Data System offers you more convenience when listening to FM radio stations. More and more radio stations have begun to broadcast RDS information alongside their programmes. As soon as programmes have been identified, the station name including a regional identifier, if applicable, will appear in the display, for example, NDR1 NDS (regional programme in Lower Saxony, Germany). When RDS is activated, the preset buttons become programme buttons. You now know exactly which programme you have tuned into, making it easy to find the desired station quickly. But RDS offers you further advantages:
If SEARCH appears in the display when switching on the radio or recalling one of the stored frequencies, the unit is automatically searching for an alternative frequency. SEARCH will disappear from the display when the alternative frequency has been found or after the frequency band has been run through completely. If the reception quality of the selected programme becomes too bad: Tune into another station.

Station tuning

Automatic tuning / Press / ; the car radio will automatically search for the next station. When keeping the upper or lower part / of the rocker switch depressed, seek tuning will speed up in upwards or downwards direction.

REG - regional programme

Certain radio programmes are split up at times into regional programmes offering local information. The 1st programme broadcast by NDR, for example, offers programmes with different contents in the northern states of Germany Schleswig-Holstein, Hamburg and Lower Saxony at certain times of the day. If you have tuned to a regional programme, you can select between REG ON and REG OFF: REG ON the radio keeps tuned to the current regional programme, even if the reception quality is getting poorer. REG OFF the radio automatically tunes to the regional programme offering the best reception quality (but maybe with local information for another service area).
Radio operation with RDS (Radio Data System)
Manual tuning: Press << >>. The frequency will change in short intervals in downwards or upwards direction. When holding the right or left part of the rocker switch depressed, the frequency scan is speeded up.

Changing the memory bank

Automatically storing the strongest stations with TravelYou can shift between the memory banks I, store II and T in order to store stations and recall
them later. The currently selected memory bank is indicated in the display. Press the TS/FM button as many times until the desired memory bank lights up in the display. You can automatically store the five most powerful FM stations of your current reception area sorted according to their signal strength. This function is particularly convenient on longer trips. Press the TS/FM button for 1 sec. T-STORE will appear in the display. The five strongest FM stations will be automatically stored on the memory bank T (Travelstore). When this process has been completed, the radio will play the first station stored on preset 1. If desired, stations can also be stored manually on the Travelstore bank (see Storing stations).

Scrolling through the broadcasting networks
You can use the << >> buttons to tune in stations of your reception area. If several programmes of the broadcasting networks can be received, you can scroll through them in forwards direction pressing >>, or backwards using the << button, e.g. NDR 1, 2, 3, 4, N-JOY, FFN, ANTENNE. For this it is necessary that the stations have been tuned in at least once and that AF is active (lights up in the display). For this purpose, start automatic tuning, e.g. using Travelstore: Press TS/FM for 1 sec.; the system starts to run through the frequency band. The display shows T-STORE. If AF does not light up, press AF/TA for approximately 1 sec. This fulfils the requirements for selecting stations with << >>.

Storing stations

On FM, you can store five stations on the preset buttons 1, 2, 3, 4, 5 for each of the memory banks I, II and T. Select the desired memory bank. Tune in a station with the rocker switch (either automatically or manually).
Press and hold down the desired preset button until the radio resumes play after the muting (takes approximately 1 sec., confirmed by beep). Now the station has been stored. The activated preset button is indicated in the display. Notice: Should you tune in a station which has already been stored before, then the corresponding preset position will briefly flash in the display.
Recalling stored stations
You can recall any stored station at the touch of a button. Select the memory bank with TS/FM. Press the corresponding preset button briefly to recall the station.
S. Diego DJ-I/Winds gb 30 03.06.2002, 10:55 Uhr
Scanning stored stations with Preset Scan
You can have all of the stored stations briefly scanned. To start Preset Scan: Press SCA/SRC for approximately 1 sec. until SCAN appears in the display. All of the stored stations to be received in the selected waveband will be scanned one after the other. On FM, the radio will either scan the stations stored on memory bank I and II or T. To select a scanned station and switch off Preset Scan: Press SCA/SRC for about 1 second. Note: If TA shows on the display panel, the system will scan the stored traffic stations only.
Selecting the seek tuning sensitivity
You can alter the automatic seek tuning sensitivity. If lo is displayed, the radio will only pick up strong, local stations. If lo does not light up, the radio will also pick up weaker, distant stations. Should you wish to alter the seek tuning sensitivity, refer to chapter DSC programming LO/DX.

Loudness

Adjusts the low bass frequencies for a more natural sound. Switching Loudness on/off: Press the AUD button for approximately 1 sec. When the Loudness function is active, LD will light up in the display. See chapter DSC programming for more information.

Stereo - mono switching

The radio will only play in stereo if the stereo quality of the received station signal is sufficient. When the signal strength gets poor, the radio will gradually switch to mono. You can select between stereo or mono sound in the DSC menu. For more information, refer to chapter DSC programming STEREO/MONO. Each time the radio is switched on, stereo sound is activated automatically.
S. Diego DJ-I/Winds gb 31 03.06.2002, 10:55 Uhr
Receiving traffic programme stations with RDS-EON
EON stands for Enhanced Other Networks, meaning the exchange of information within a radio network. Many FM broadcasters offer traffic messages for their service area at regular intervals. All traffic programme stations transmit a special carrier signal alongside their programmes, which is decoded by your car radio. If this signal is identified, TP will appear in the display (Traffic Programme). In addition to these, there are also stations which do not actually transmit traffic programmes themselves, but by using RDSEON they offer the possibility to receive the traffic messages broadcast by another traffic programme station in the same radio network. If you wish to have the priority for traffic announcements activated while listening to one of these stations (e.g. NDR3), TA must appear on the display panel. If a traffic announcement is broadcast, the radio will automatically switch to the linked traffic programme station (in this case, NDR2) for the duration of the message and return to the original programme (NDR3) afterwards.
Traffic announcement priority on/off
If the priority for traffic announcement programmes is activated, TA will light up in the display. To switch the priority on or off: Press the AF/TA button. When pressing AF/TA while a message is being broadcast, this message will be interrupted. The unit will then switch back to the previous condition. The priority for all other traffic messages remains active. Please note that several buttons have no function while a traffic announcement is broadcast.

Switching off the beep tone a) Tune into another station offering traffic information: Press the rocker switch or press a preset button which has a traffic programme station allocated to it. Alternatively: b) Switch off the priority for traffic announcements: Press AF/TA. TA will disappear from the display.
Automatic seek tuning start
(tape and CD changer operation) When leaving the reception area of the tuned in traffic programme station while listening to a tape or CD, the system will automatically start searching for a new TA programme. If no such station is found within approximately 30 seconds, a beep tone will sound every 30 seconds. To switch off the beep tone proceed as described above.

Beep tone

If you leave the reception area of the traffic programme station currently tuned into, you will hear a beep tone approximately every 30 seconds. This tone will also be released when pressing a preset button which has no traffic programme allocated to it.
S. Diego DJ-I/Winds gb 32 03.06.2002, 10:55 Uhr
Adjusting the volume for traffic announcements and the beep tone
This volume was preset at the factory, though you can alter the value using the DSC function (see DSC programming TA VOL). You can also change the announcement and beep volume for the current message only. Decreasing the volume: Press AF/TA briefly. The usual volume boost is now disabled and you can alter the volume as desired. The priority is deactivated for the current message only. Increasing the volume:. Turn the knob 1
The car stereo has to be switched on. The unit will automatically switch to tape operation when inserting a cassette.
To stop fast forward press FR. Fast rewind Press FR (fast rewind). At the beginning of the tape the unit will start playback automatically. To stop fast rewind press FF.
Fast winding FR : fast rewind - press FF to stop. FF : fast forward - press FR to stop.

Inserting a tape

Turn on the set. Insert a tape. Track A or 1 will be played. During cassette operation, TR 1 or TR 2 (track) will appear in the display.
Insert the tape with side A or 1 facing up, the open side showing to the right.

Ejecting a tape

Press. The cassette will eject.
Reversing the tape Press both buttons at a time. TR1 or TR2 will appear in the display.

Reversing the tape

To switch to the other side of the tape during playback, press FR and FF simultaneously. At the end of the tape the unit will automatically reverse to the other side (autoreverse). The display shows TR 1 for track (side) 1 or TR 2 for track 2.
S. Diego DJ-I/Winds gb 33 03.06.2002, 10:55 Uhr
Fast forward Press FF (fast forward). At the end of the tape the unit will automatically reverse the direction and start playing the other side.

Fast winding

Cassette operation
Notice: If there is too much tension on the tape during playback, the set may reverse the direction by itself before having reached the end of the tape side. In this case check the condition of the cassette tape. Sometimes it helps to rewind it completely.

Care notes

To avoid possible problems, we recommend you to use C-60/C-90 type cassette tapes only. Store your tapes in a cool place away from dirt, dust and temperatures exceeding 50 Celsius. Allow very cold tapes to warm up before playing them in order to avoid uneven tape transport. After approximately 100 hours of use, dust particles collected on the playback head or roller may lead to tape run problems and sound distortions. Use a head cleaning tape to remove normal dirt build-up. For tougher cases, use a cotton swab (Q-Tip) dipped in alcohol. Do not attempt to clean by inserting a hard object into the player!
Listening to the radio during fast tape winding with RM (Radio Monitor)
During fast winding of the tape, i.e. when the radio is normally muted, you can use the RM function to listen to the radio. For more information please refer to chapter DSC programming RM ON/OFF.
S. Diego DJ-I/Winds gb 34 03.06.2002, 10:55 Uhr

CD selection Up Down

Note: Use only perfectly circular CDs. CDs manufactured in the shape of a butterfly or a beer mug, for example, are not suitable for use with this equipment. Using such CDs can very likely result in the destruction of the CD and the CD drive. We assume no responsibility for damages caused by using unsuitable CDs.
Title selection Upwards: Press briefly. CUE - fast advance (audible): Keep depressed. Downwards: Press as many times as required. To re-start a title: Press briefly. REVIEW - fast reverse (audible): Keep depressed.
MIX OFF The Mix function is deactivated. Discs and titles will be selected in numeric order. To change the MIX mode: Press DSC. Select MIX using the rocker switch / and adjust with << >>. If the function is active, CDC MIX will be briefly displayed every time CD changer operation is activated.

Switching to the CD changer mode
Make sure that at least one CD has been inserted into the magazine. Use SRC/SCA to toggle the audio source: Press SRC/SCA repeatedly until the CD functions appear in the display.
S. Diego DJ-I/Winds gb 35 03.06.2002, 10:55 Uhr
San Diego DJ I: The changer is included in the scope of delivery. Windsor RCM 127: CDC A 06 or A 072 (directly) CDC A 05, CDC F 05 or A 071 (adapter cable is required). The changer is not included with this equipment and can be purchased separately at a retail outlet.

Selecting CDs and titles

MIX playback
You can have the CD tracks played in random order. Select the desired MIX mode in the DSC menu. MIX CDC The MIX mode is active: The individual discs and the titles of the selected CD are chosen randomly. After all titles have been played, the next CD will be selected at random again. Use to select a CD title in random order.

CD changer operation

Selecting the display mode
You can select the desired display mode for CD playback: CDC NUMBER The CD number, such as CD 8 T2 is displayed. TIME The elapsed playback time of the current title is displayed, for example 2 : 32.
Use this function to scan all of the CD tracks. To start the Scan function: Press SCA/SRC for approximately 1 second. The titles will be scanned one after the other in ascending order. To stop the Scan function: Press SCA/SRC for approximately 1 second. The track currently scanned is continued to be played. SCAN will also be terminated by pressing one of the buttons AUD, GEO, DSC, SCA/SRC, << >> or /.
To switch the display mode: Press DSC. Use the rocker switch / to select CDC DISP. Use << >> to adjust to NUMBER or TIME.
S. Diego DJ-I/Winds gb 36 03.06.2002, 10:55 Uhr

LEARN KC

RM ON/OFF

/ << >>

Select function Adjust/recall value
S. Diego DJ-I/Winds gb 37 03.06.2002, 10:55 Uhr
(Radio Monitor) Allows you to listen to the radio during fast winding of the tape. RM ON Radio playback activated. RM OFF Function deactivated.
LED ON/OFF You can choose between LED ON or LED OFF. With LED ON, the KeyCard tongue will flash for extra anti-theft protection when the unit has been switched off and the KeyCard removed.
To train a second KeyCard. Please read the information in chapter KeyCard theft protection system - Training a second KeyCard.
press DSC. Use the rocker switch to select and adjust the functions described in the following. The display will show you the adjusted condition.

TA VOL

Overview of DSC factory settings
MIX REG RM READ KC LEARN KC LED BEEP TA VOL LOUDNESS STEREO/MONO DX OFF OFF OFF ON 3 STEREO 1
S. Diego DJ-I/Winds gb 38 03.06.2002, 10:55 Uhr

Amplifier

Output power: 4 x 23 W RMS power acc. to DIN 45324 at 14.4 V 4 x 35 W max. power
Wavebands: FM : FM sensitivity:
87.MHz 1.0 V at 26 dB signal-to-noise ratio

Tape player

Frequency response: 40 - Hz

CD changer

Frequency response: 5 - Hz
Subject to modifications! 39
S. Diego DJ-I/Winds gb 39 03.06.2002, 10:55 Uhr
Using the area code to be entered you will be automatically given the address and phone number of the next Blaupunkt service centre. You can also request this information by fax.
FM frequency response: 35 - Hz
Then call the following chargeable phone number: / 56 66.
If you would like to know the address of the next Blaupunkt service centre of your area without having our service list at hand: - Find out your area code.
Address of the next service centre in your vicinity (only for Germany)
Blaupunkt telephone hotline

Specifications

Blaupunkt-Werke GmbH

Bosch Gruppe

6/97 Ts K7/VKD 401 293

25.02.2000, 16:28 Uhr