RadioCDMP3WMA

Santa Cruz MP36 Valencia MP36

080 310

Operating instructions

http://www.blaupunkt.com

01SCruz_ValenciaMP36_d.indd 1

09.02.2006 13:56:18 Uhr

01SCruz_ValenciaMP36_d.indd 2

09.02.2006 13:56:22 Uhr

Controls
1 On/Off button Short press: Mutes the device. Long press: Switches the device off. 2 button to open the flip-release control panel.
8 DISPL button Short press: Briefly displays alternative display contents (e.g. time). Long press: Changes display contents. 9 MENU button Short press: Calls up the menu for basic settings. Long press: Starts the Scan function. : Arrow buttons ; Buttons 1 - 6 < button (Eject) for removing a CD from the device.
3 Volume control 4 SOURCE button to switch sources between radio, CD, CD changer (if connected) and AUX. 5 AUDIO button to adjust bass, treble, centre, subout, balance and fader. Switching X-BASS on/off and adjusting it. Selects an equalizer presetting. 6 BNDTS button Short press: Selects the FM memory banks and the MW and LW wavebands. Long press: Starts the Travelstore function. 7 TRARDS button Short press: Switches traffic information standby on/off. Long press: Switches convenient RDS function on/off.
02_SCruz_ValenciaMP36_eng.indd 32

07.02.2006 11:22:19 Uhr

Contents
Notes and accessories.. 35 Disposal of old unit (EU countries only).. 35 Installation.. 35 Optional equipment(not part of the scope of delivery).. 35 Detachable control panel. 36 Theft protection.. 36 Detaching the control panel. 37 Attaching the control panel.. 37 Switch-off time (OFF TIMER). 37 Switching on/off. 38 Adjusting the volume. 38 Setting the power-on volume. 38 Quickly reducing the volume (Mute). 39 Muting during telephone mode. 39 Switching the confirmation beep on/off. 39 Radio mode.. 40 Adjusting the tuner.. 40 Switching to radio mode. 40 Convenient RDS functions (AF, REG) 40 Selecting the waveband/ memory bank.. 41 Tuning into a station. 41 Setting the sensitivity of station seek tuning. 42 Storing stations.. 42 Storing stations automatically (Travelstore).. 42 Listening to stored stations. 43 Scanning receivable stations (SCAN).43 Setting the scanning time.. 43 Programme type (PTY). 43 Optimising radio reception.. 45 Configuring the display.. 45
02_SCruz_ValenciaMP36_eng.indd 33

PORTUGUS

ESPAOL
Traffic information.. 45 Switching traffic information priority on/off.. 45 Setting the volume for traffic announcements.. 46 CD mode.. 46 Switching to CD mode. 46 Selecting tracks.. 47 Fast track selection.. 47 Fast searching (audible). 47 Random track play (MIX). 47 Scanning tracks (SCAN). 47 Repeating tracks (REPEAT). 48 Interrupting playback (PAUSE).. 48 Configuring the display.. 48 Traffic announcements in CD mode. 48 Ejecting a CD.. 48 MP3/WMA mode.. 49 Preparing an MP3 CD.. 49 Switching to MP3 mode. 50 Configuring the display.. 50 Configuring the MP3 scrolling texts. 51 Selecting a directory.. 51 Selecting Tracks/Files.. 51 Fast search. 51 Random track play MIX. 51 Scanning tracks SCAN. 52 Repeated playback of individual tracks or entire directories REPEAT.. 52 Interrupting playback (PAUSE).. 52

Optional equipment

(not part of the scope of delivery) Use only accessories approved Blaupunkt.
Road safety has absolute priority. Only operate your car sound system if the road and traffic conditions allow you to do so. Familiarise yourself with the device before setting off on your journey. You should always be able to hear police, fire and ambulance sirens in good time from inside your vehicle. For this reason, listen to your car sound system at a suitable volume level during your journey.

Road safety

Control panel
Amplifier You can use all Blaupunkt and Velocity amplifiers. CD changers You can connect the following Blaupunkt CD changers: CDC A 03, CDC A 08 and IDC A 09.

Detachable control panel

Theft protection
The device is equipped with a detachable control panel (flip-release panel) as a way of protecting your equipment against theft. The device is worthless to a thief without this control panel. Protect your device against theft by taking the control panel with you whenever you leave your vehicle. Do not leave the control panel inside your vehicle - not even in a hiding place. Notes: Never drop the control panel. Never expose the control panel to direct sunlight or other heat sources. Avoid direct skin contact with the control panels electrical contacts. If necessary, please clean the contacts with a lint-free cloth moistened with cleaning alcohol.
02_SCruz_ValenciaMP36_eng.indd 36

07.02.2006 11:22:21 Uhr

Switch-off time (OFF TIMER)
Notes: The device is switched off after a time preset by you. For instructions, please read the section "Switch-off time (OFF TIMER)" in this chapter. All the current settings are saved. Any CD already inserted in the device remains there. After opening the control panel, the device is switched off after an adjustable time. You can set this time from 0 to 30 seconds. Press the MENU button 9. Press the or button : repeatedly until the displays shows "OFF TIMER". Adjust the time with the buttons :. When you have finished making your changes, press the MENU button twice 9. Note: If you set the switch-off time to 0 seconds, the device is switched off immediately after opening the control panel.
02_SCruz_ValenciaMP36_eng.indd 37

07.02.2006 11:22:22 Uhr

Hold the control panel approximately at a right angle to the device. Slide the control panel into the devices guides that are positioned on the left and right at the lower edge of the housing. Push the control panel carefully into the bracket until it clicks into place. Carefully flip up the control panel until it clicks into place.
Attaching the control panel
If the device was still switched on when you detached the control panel, it will automatically switch on with the last setting activated (radio, CD, CD changer or AUX) when the panel is replaced.
Press the button 2. The control panel opens out towards you. Hold the control panel by its right side and then pull the control panel straight out of the bracket.
Detaching the control panel

Switching on/off

Volume
There are various ways of switching the device on/off: Switching on/off using button 1 To switch on the device, press button 1. The device switches on. To switch off the device, press and hold down button 1 for longer than two seconds. The device switches off. Switching on/off using the vehicle ignition The device will switch on/off simultaneously with the ignition if the device is correctly connected to the vehicles ignition as shown in the installation instructions and you did not switch the device off by pressing button 1. Switching the device on/off using the detachable control panel Detach the control panel. The devices switches off after the time set in the "OFF TIMER" menu. Attach the control panel again. The device switches on. The last setting (radio, CD, CD changer or AUX) is reactivated. Note: To protect the vehicle battery, the device will switch off automatically after one hour if the ignition is off.

Adjusting the volume

You can adjust the volume in increments from 0 (off) to 66 (maximum). To increase the volume, turn the volume control 3 clockwise. To decrease the volume, turn the volume control 3 counterclockwise.
Setting the power-on volume
Note: The device features a time-out function (time window). For example, if you press the MENU button 9 and select a menu item, the device switches back after approx. 8 seconds after the last button activation. The settings performed are saved. You can set the power-on volume. Press the MENU button 9. Press the or button : repeatedly until "ON VOLUME" appears on the display. Adjust the power-on volume with the buttons :. To help you adjust the setting more easily, the device will increase or decrease the volume as you make your changes. If you enable "LAST VOL", the volume which was set the last time you switched off the device is re-enabled.

Tuning into a station

Browsing through broadcasting networks (FM only) If a radio station provides several programmes, you have the option of browsing through its so-called "broadcasting network". Note: The convenient RDS function must be activated before you can use this feature. Press the or button : to change to the next station of the broadcasting network. Note: When using this feature, you will only be able to switch to stations that you have received once before already. To receive the stations, use the Scan or Travelstore function.
When you have finished making your changes, press the MENU button 9. Note: You can set different sensitivity levels for FM and MW or LW (AM).

Storing stations

Storing stations manually Select the desired memory bank (FM1, FM2, FMT) or one of the wavebands (MW or LW). Tune into the desired station. Press and hold down one of the station buttons 1 - 6 for longer than two seconds to assign the station to that button.
Setting the sensitivity of station seek tuning
You can choose whether the radio should only tune into stations providing good reception or whether it can also tune into those with a weak reception. Press the MENU button 9. Press the or button : repeatedly until "SENS" appears on the display. The display shows the currently set sensitivity level. "SENS HI3" means that the tuner is set to the highest sensitivity setting. "SENS LO1" means it is set to the lowest sensitivity setting. Set the desired sensitivity level using the or button :.
Storing stations automatically (Travelstore)
You can automatically store the six stations offering the strongest reception in the region (FM only). The stations are stored in the FMT memory bank. Note: Any stations that were previously stored in this memory bank are deleted in the process. Press and hold down the BNDTS button 6 for longer than two seconds. The storing procedure begins. "FM TSTORE" appears on the display. After the process has completed, the radio will play the station that is stored in memory location 1 of the FMT memory bank.
02_SCruz_ValenciaMP36_eng.indd 42

07.02.2006 11:22:25 Uhr

You can use the scan function to play all the receivable stations briefly. You can set the scanning time in the menu to between 5 and 30 seconds. Starting SCAN Press and hold down the MENU button 9 for longer than two seconds. Scanning begins. "SCAN" appears briefly in the display followed by a flashing display of the current station name or frequency. Cancelling the SCAN and continuing to listen to a station Press the MENU button 9. Scanning stops and the radio continues playing the station that it tuned into last.

Besides transmitting the station name, some FM stations also provide information on the type of programme that they are broadcasting. Your car radio can receive and display this information. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT SERVICE POP ROCK KNOWLEDGE KIDS You can use the PTY function to select stations of a particular programme type. PTY-EON If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type. Notes: If the tuner does not find a station that corresponds to the selected programme type, you will hear a beep and "NO PTY" appears briefly in the display. The radio will then retune to the station that it received last.
Setting the scanning time
Press the MENU button 9. Press the or button : repeatedly until "SCAN TIME" appears on the display. Set the desired scan time using the or button :.
02_SCruz_ValenciaMP36_eng.indd 43
Scanning receivable stations (SCAN)

Programme type (PTY)

Select the memory bank or waveband. Press one of the station buttons 1 - 6 ;. The stored station is played if it can be received.
Note: The defined scanning time is also applied by the system to scanning carried out in CD and CD changer mode.
Listening to stored stations
If the tuned radio station or another station on the broadcasting network broadcasts your selected programme type at a later point in time, the radio will automatically switch from the currently tuned station or from CD mode or CD-changer mode to the station whose programme type matches the one you selected. If you do not want this PTY EON switching, disable it in the menu with "PTY OFF". First, press one of the SOURCE 4 or BNDTS buttons 6. Switching PTY on/off Press the MENU button 9. Press the or : repeatedly until "PTY" appears on the display with the current setting. Press the or button : to switch PTY ON or OFF. Press the MENU button 9. Selecting the PTY language You can select the language for the display of the programme types. Options include DEUTSCH, ENGLISH and FRANAIS. Press the MENU button 9. Press the or button : repeatedly until "PTY LANG" appears on the display. Set the desired language with the or button :.
When you have finished making your changes, press the MENU button twice 9. Selecting a programme type and starting seek tuning Press the or button :. The current programme type appears on the display. If you want to select another programme type, you can do so by pressing the or button : while this display is visible. Or Press one of the buttons 1- 6 ; to select a programme type that is assigned to one of these buttons. The selected programme type appears briefly on the display. Press the or button : to start seek tuning. The radio will then tune into the next station that it finds that corresponds to your selected programme type. Assigning a programme type to a station button Select a programme type using the or button :. Press and hold the desired station button 1 - 6 ; for longer than two seconds. The programme type is stored on the selected button 1- 6 ;.

Optimising radio reception

CD mode

Setting the volume for traffic announcements
Press the MENU button 9. Press the or button : repeatedly until "TA VOLUME" appears on the display. Set the volume using the or button :. To help you adjust the setting more easily, the device will increase or decrease the volume as you make your changes. When you have finished making your changes, press the MENU button twice 9. Notes: Using the volume control 3, you can also adjust the volume during a traffic announcement for the duration of that announcement. You can adjust the sound settings and volume distribution settings for traffic announcements. For further information, please read the "Sound" chapter.
You can use this device to play standard audio CDs, CD-Rs and CD-RWs with a diameter of 12 cm. To avoid problems when playing self-burned CDs, you should not burn CDs at speeds greater than 16-speed. to the CD drive! CD singles with a diameter of 8 cm and noncircular contoured CDs (shape CDs) must not be used. We accept no responsibility for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. To ensure proper functioning, use only CDs with the Compact-Disc logo. Copy-protected CDs can cause playback problems. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs! Besides being able to play audio CDs on this device, you can also play CDs containing MP3/WMA music files. For further information, please read the chapter entitled "MP3/ WMA mode".

Risk of severe damage

Switching to CD mode
If there is no CD inserted in the drive, press the button 2. The control panel opens. Gently insert the CD with its printed side uppermost into the drive until you feel some resistance.
02_SCruz_ValenciaMP36_eng.indd 46

07.02.2006 11:22:27 Uhr

Random track play (MIX)
Press the 5 MIX button ;. "MIX CD" appears briefly on the display and the MIX symbol is displayed. The next randomly selected track will then be played. Cancelling MIX Press the 5 MIX button ; again. "MIX OFF" appears briefly on the display and the MIX symbol disappears.

Selecting tracks

Press one of the arrow buttons : to select the next or previous track. If you press the or button : once, the player will play the current track again from the beginning.

02_SCruz_ValenciaMP36_eng.indd 47
To quickly select tracks backwards or forwards, press and hold down the or button : until fast track selection backwards / forwards begins.
Cancelling Scan and continuing listening to a track To end the scanning process, press the MENU button 9. The currently scanned track will then continue to be played normally.

Fast track selection

Note: You can set the scanning time. For further information, please read the section entitled "Setting the scanning time" in the "Radio mode" chapter.
You can scan (briefly play) all the tracks on the CD. Press the MENU button 9 for longer than two seconds. The next track will then be scanned.
Note: If the vehicle ignition was switched off prior to inserting the CD, you must switch the device on first with the button 1 to start the playback. If a CD is already inserted in the drive, press the SOURCE button 4 repeatedly until "CD" appears on the display. Playback begins from the point at which it was last interrupted.

Scanning tracks (SCAN)

The drive draws in the CD automatically. You must not hinder or assist the drive as it draws in the CD. Gently close the control panel whilst exerting a little pressure until you feel it click into place. The CD starts playing.
To fast search backwards or forwards, press and hold down the or button : until fast searching backwards / forwards begins.

Fast searching (audible)

Repeating tracks (REPEAT)
If you want to repeat a track, press the 4 RPT button ;. "RPT TRCK" appears briefly on the display and the RPT symbol is displayed. The track is repeated continuously until you deactivate RPT. Cancelling repeat If you want to cancel the repeat function, press the 4 RPT button ; again. "RPT OFF" appears briefly on the display and the RPT symbol disappears. Normal playback is then resumed.
Traffic announcements in CD mode
If you wish to receive traffic announcements in CD mode, press the TRARDS button 7. The priority for traffic announcements is activated if the display shows the traffic jam symbol. For further details, please read the chapter entitled "Traffic information".

Ejecting a CD

Press the button 2. The control panel opens out towards you. Press the eject button < next to the CD tray. The CD is ejected. Remove the CD and close the control panel. Notes: If a CD is ejected, the drive will automatically draw it back in again after 10 seconds. You can also eject CDs whilst the device is switched off or whilst another audio source is activated.

Switching to MP3 mode

MP3 mode is activated in the same way as normal CD mode. For further information, please read the section entitled "Switching to CD mode" in the "CD mode" chapter.
Configuring the default display You can display various types of information on the current track: Directory number and track number Directory number and time Directory number and playing time Track number and playing time Track number and time To switch between the different display options, press and hold down the DISPL button 8 for longer than two seconds, to switch the display. Note: After the MP3 scrolling text was scrolled once after a track change, the information is permanently shown on the display.
02_SCruz_ValenciaMP36_eng.indd 50
One of the following scrolling texts is shown once on the display with every track change. Afterwards, the configured standard display is shown. The available scrolling texts are: Directory name ("DIR NAME") Name of the track ("SONG NAME") Name of the album ("ALBM NAME") Name of the artist ("ARTIST") File name ("FILE NAME") Note: Artist, track and album name are part of the MP3-ID tag of version 1 and can only be displayed if they have been saved with the MP3 files (for further information, please read the instructions that came with your PCs MP3 software or burner software). To switch between the different display options, press the MENU button 9. Press the or button : repeatedly until "MP3 DISP" appears on the display. Select the desired MP3 scrolling text with the or button :. When you have finished making your changes, press the MENU button twice 9. Note: The "MP3 DISP" menu item is available only during the playback of a CD with MP3/WMA files.
To move up or down to another directory, press the or button : once or several times.
To move up or down to another track/file in the current directory, press the or button : once or several times. If you press the button : once, the current track is played again from the beginning.

Fast search

Random track play MIX
To play the tracks in the current directory in random order, briefly press the 5 MIX button ;. "MIX DIR" appears on the display and the MIX symbol is displayed. To play the tracks contained in all the directories on the inserted MP3-CD in random order, press the 5 MIX button ; for longer than two seconds. "MIX CD" appears on the display and the MIX symbol is displayed.
02_SCruz_ValenciaMP36_eng.indd 51

07.02.2006 11:22:30 Uhr

Selecting Tracks/Files
Configuring the MP3 scrolling texts

Selecting a directory

Cancelling MIX To cancel MIX, briefly press the 5 MIX button ;. "MIX OFF" appears on the display and the MIX symbol disappears.

Setting the time

Displaying the time continuously when the device is off and the ignition is on
Press the or button : to switch between modes. When you have finished making your changes, press the MENU button 9.
You can adjust the sound settings (bass and treble) separately for each source (radio, CD, CD changer or AUX). The volume distribution settings (balance and fader) apply to all the audio sources (except for traffic announcements). Fader and balance can be adjusted for traffic announcements (TA) only during a traffic announcement.
Setting the left/right volume distribution (balance)
To adjust the left/right volume distribution (balance), press the AUDIO button 5. "BASS" appears on the display. Press the or button : repeatedly until "BAL" appears on the display with the current setting. Press the or button : to adjust the balance (right/left). Press the AUDIO button 5 to exit the menu.

Adjusting the bass

Press the AUDIO button 5. "BASS" appears on the display. Press the or button : to adjust the bass. When you have finished making your changes, press the AUDIO button 5.
Adjusting the front/rear volume distribution (fader)
To adjust the front/rear volume distribution (fader), press the AUDIO button 5. "BASS" appears on the display. Press the or button : repeatedly until "Fader" appears on the display with the current setting. Press the or button : to adjust the volume distribution front/rear. Press the AUDIO button 5 to exit the menu.

Adjusting the treble

Press the AUDIO button 5. "BASS" appears on the display. Press the button : repeatedly until "TREBLE" appears on the display. Press the or button : to adjust the treble. When you have finished making your changes, press the AUDIO button 5.
02_SCruz_ValenciaMP36_eng.indd 56

07.02.2006 11:22:33 Uhr

Amplifier/Sub-Out

X-Bass

The car sound system provides connections that allow you to connect external amplifiers. In addition, you can connect an amplifier to the integrated low-pass filter of the device to operate a subwoofer. For this purpose, the amplifiers must be connected as described in the installation instructions.
Adjusting the X-BASS boost
Press the AUDIO button 5. "BASS" appears on the display. Press the or button : repeatedly until "XBASS" appears on the display. Press the or button : repeatedly until the desired setting appears on the display. When you have finished making your changes, press the AUDIO button 5 twice.
02_SCruz_ValenciaMP36_eng.indd 57
X-Bass allows you to increase the bass at low volume. The selected X-Bass setting is effective for all audio sources (radio, CD, CD changer or AUX). The X-BASS increase can be set in increments of 1 to 3. "XBASS OFF" means that the X-BASS function is switched off.

X-BASS

Equalizer

Display

Equalizer presettings (Presets)
This device features an equalizer in which the settings for the music genres "ROCK", "POP" and "CLASSIC" are already programmed. To select an equalizer setting, press the AUDIO button 5. "BASS" appears on the display. Press the or button : repeatedly until "POP", "ROCK", "CLASSIC" or "EQ OFF" appears on the display. Press the or button : to select one of the settings or select "EQ OFF" to switch off the equalizer. The selected setting is permanently shown on the display. When you have finished making your changes, press the AUDIO button 5.
Adjusting the display settings
Adjusting the level display
The level display on your display briefly symbolically shows the settings process for volume and the settings of the sound control. Aside from the settings processes, the level display shows the peak value for music or language. You can switch the level display on or off. Press the MENU button 9. The displays shows "MENU". Press the or button : repeatedly until "PEAK LVL" appears on the display. Press the or button : to select between "PEAK ON" and "PEAK OFF". When you have finished making your changes, press the MENU button twice 9.
Setting the display illumination colour
For the display illumination, you can mix a colour from the RG spectrum (red green) or select a colour during a colour seek. Mixing a colour for the display illumination To customise the display illumination to suit your tastes you can mix a colour yourself using the primary colours red and green.
02_SCruz_ValenciaMP36_eng.indd 58

07.02.2006 11:22:34 Uhr

02_SCruz_ValenciaMP36_eng.indd 59
Selecting a display illumination during a colour scan Press the MENU button 9. Press the or button : repeatedly until "COL SCAN" appears on the display. Press the or button : to start the colour seek. The device starts changing the display illumination colour. If you want to adopt the currently set colour, press the MENU button 9 once.
Press the or : repeatedly until "DISP COL" appears on the display. Press the or button :. The menu for mixing your own colour is displayed. "R" and "G" are displayed with the current values. The "R" setting flashes. Press the or button : repeatedly until the desired colour value is displayed. Press the or button : to move the selection mark behind the other colour. Adjust the colour components to suit your preferences. When you have finished making your changes, press the MENU button twice 9.

To start the seek tuning again, press the or button :. If you found the desired colour, press the MENU button twice 9.

External audio sources

Technical data
If no CD changer is connected to the device, you can connect an external audio source. Audio sources can, for example, be portable CD players, MiniDisc players or MP3 players. If you want to connect an external audio source, you will need an adapter cable. You can obtain this cable (Blaupunkt no.: 897 093) from your authorised Blaupunkt dealer. The AUX input must be activated in the menu. Note: If no CD changer is connected to the device, the AUX menu item cannot be selected.

Technical Data

Amplifier
Output power: 4 x 18 watts sine at 14.4 V and 1% distortion factor at 4 ohms. 4 x 26 watts sine in accordance with DIN 45324 at 14.4 V at 4 ohms. 4 x 50 watts max. power
Wavebands: FM : 87.5 - 108 MHz 531 - kHz MW : LW : 153 - 279 kHz FM frequency response: 35 - 16,000 Hz
Switching the AUX input on/off
Press the MENU button 9. Press the or button : repeatedly until "AUX OFF" or "AUX ON" appears on the display. Use the buttons : to select between the options "AUX ON" and "AUX OFF". When you have finished making your changes, press the MENU button 9. Note: If the AUX input is switched on, you can select it by pressing the SOURCE button 4.
Frequency response: 20 - 20,000 Hz

Pre-amp out

4 channels: 2V 2 V / 6 k 10 V / 1 k 1.36 kg

Input sensitivity

AUX input: Tel./Navi input:

Weight

Subject to changes 60
02_SCruz_ValenciaMP36_eng.indd 60

09.02.2006 9:32:08 Uhr

Bitte den ausgefllten Gertepass sicher aufbewahren! Please keep the filled-in radio pass in a safe place! Prire de conserver soigneusement la carte dautoradio remplie! Tenete per favore il libretto di apparecchio, debitamente riempito, in un posto sicuro! Bewaar de ingevulde apparaatpas op een veilige plaats! Vnligen frvara ifyllt apparatpass p sker plats! Favor guardar el documento del aparato debidamente llenado en un lugar seguro! Por favor, guardar o carto preenchido do aparelho num lugar seguro! Det udfyldte apparatpas opbevares et sikkert sted! Prosimy przechowywa metryk radia w bezpiecznym miejscu! Vyplnn dokument o pstroji prosm bezpen uschovejte! Vyplnen dokument o prstroji prosm bezpene uschovajte!
13EA_SantaCruz_Valenc_MP36.indd 363

07.02.2006 11:18:02 Uhr

Country: Germany Austria Belgium Denmark Finland France Great Britain Greece Ireland Italy Luxembourg Netherlands Norway Portugal Spain Sweden Switzerland Czech. Rep. Hungary Poland Turkey USA Brasil (Mercosur) Malaysia (Asia Pacific) (D) (A) (B) (DK) (FIN) (F) (GB) (GR) (IRL) (I) (L) (NL) (N) (P) (E) (S) (CH) (CZ) (H) (PL) (TR) (USA) (BR)
Phone: 0180-5000225 01-0 02-360 09-01-01-01-700 02-1010 66-08-7501850 01-8471644 02-803 0800-118922 0212-71 800-950-7045446
Fax: 05121-01-391 02-44-09-01-01-01-706 02-1040 66-4078 08-7501810 01-8471650 02-809 022-8771260 0212-40 708-6817188 +55-2773 +604-6413 640
WWW: http://www.blaupunkt.com

(MAL) +604-6382 474

Gertepass

Name: Typ: Serien-Nr:

7 646...

BP...

Blaupunkt GmbH, Robert-Bosch-Strae 200, D-31139 Hildesheim
01/06 - CM-AS/SCS1 (dt, gb, fr, it, nl, sw, es, pt, dk, pl, cz, sk)

8622404845

13EA_SantaCruz_Valenc_MP36.indd 364

07.02.2006 11:18:03 Uhr