Radio / Cassette

Sydney RCM 126

Operating instructions

Sydney RCM126 d

30.04.2002, 16:06 Uhr

Sydney RCM126 d 3 30.04.2002, 16:06 Uhr

PORTUGUS

ESPAOL

SVENSKA

NEDERLANDS

ITALIANO

FRANAIS

ENGLISH

Quick reference.. 30 Important notes.. 36
Precautions.. 36 Traffic safety... 36 Installation.. 36 Telephone mute. 36 Accessories.. 36
KeyCard theft protection system.. 37
Putting the unit into operation. 37 Removing the KeyCard. 37 Training a second KeyCard/ Replacing a KeyCard.. 37 Displaying the radio pass data. 37 Short Additional Memory (S.A.M.). 38 Turn On Message (T.O.M.). 38 Optical indication for extra security. 38 Care of your KeyCard.. 38
Switching the audio source. 38 Radio operation with RDS. 39
AF - Alternative frequency.. 39 REG - regional programme. 39 Selecting a waveband. 39 Station tuning.. 39 Automatic tuning /.. 39 Manual tuning with << >>. 40 Scrolling through the broadcasting networks (only FM). 40 Changing the memory bank (FM). 40
Receiving traffic programme stations with RDS-EON. 44
Traffic announcement priority on/off. 44 Warning beep.. 44 Switching the warning beep off. 45 Automatic seek tuning start. 45 Adjusting the volume for traffic announcements and the warning beep. 45 Adjusting GEO for traffic messages and the warning beep.. 45

DSC programming.. 50

Overview of the DSC factory settings. 52

Appendix.. 53

Specifications.. 53
Sydney RCM126 gb 29 30.04.2002, 16:10 Uhr
Storing stations.. 40 Automatically storing the strongest stations with Travelstore.. 41 Recalling stored stations.. 41 Scanning stored stations with Preset Scan.. 41 Scanning stations with Radio-Scan. 41 Changing the scan time. 41 Selecting the seek tuning sensitivity. 41 Switching from stereo to mono (FM). 42 PTY Programme Type.. 42 Switching PTY on/off.. 42 Programme type.. 42 Checking the programme type of the station.. 42 Displaying the selected programme type.. 42 Selecting a programme type. 42 Storing programme types. 43 Scanning stations with PTY-SCAN. 43 PTY priority.. 43

Tape operation.. 46

Inserting a tape.. 46 Removing a tape.. 46 Fast Forward/Rewind.. 46 Selecting titles with S-CPS. 46 Switching the tape side. 46 Tape equalisation.. 46 Scanning cassette titles with SCAN.. 47 Dolby B NR*.. 47 Skipping unrecorded tape portions with Blank Skip.. 47 Listening to the radio during fast tape winding with RM. 47 Care notes.. 47
CD changer operation (optional) 48
Switching to CDC operation.. 48 Selecting CDs and titles.. 48 MIX playback.. 48 Selecting the display mode. 48 Storing the display mode.. 49 SCAN operation. 49 Entering CD names.. 49 Deleting CD names with DSC-UPDATE.. 49

DEUTSCH

Contents

Quick reference

1 Switching on/off with the ON button: Press ON. When switching the set on with the ON button, the KeyCard has to be inserted. The unit will play with the preadjusted volume. Switching on with the ignition being switched off: To keep on operating the set when the ignition is switched off (KeyCard is inserted), proceed as follows: Press ON after the double beep tone. The unit will be turned on. To avoid that the battery goes flat, the system will be turned off automatically after a playback time of one hour. 2 VOL+ / VOLTo alter the volume. Each time the set is switched on, it will play with the pre-adjusted volume (VOL FIX). You may also change the VOL FIX setting (see chapter DSC programming). 3 For instantly muting the volume. button the volume By pressing the will be muted immediately. MUTE will appear in the display. The function is cancelled by pressing or VOL+. button When pressing VOL-, the normal volume will be by one grade lower than the mute volume. To programme the mute volume level, proceed as follows: Adjust the desired volume. for two seconds until you Press hear a beep. Now this volume level is stored as your mute volume. Extra function Memory button in the DSC menu. 4 FMT Press repeatedly to switch between the FM memory banks I, II and T (Travelstore). When pressing this button, the system will automatically switch to FM. Extra function FMT To store the six most powerful stations automatically with Travelstore: Press FMT until you hear a beep or T-STORE appears in the display. 5 ML - toggle switch To toggle between medium and long wave reception.

Sydney RCM126 gb 32 30.04.2002, 16:10 Uhr
9 MIX Changer (CDC) operation (optional) MIX CD The CD titles will be played at random. The individual discs are selected in numeric order. MIX MAG The CD titles will be played at random. The individual discs are also selected in random order. MIX OFF The Mix function is deactivated. Press MIX as many times until the desired function briefly appears in the display. : SC Radio operation Scan Press SC briefly FM SCAN and the name of the scanned station will alternately appear in the display. The unit will scan all stations which can be received.
Changer operation (optional) CD-Scan Press SC. CDC-SCAN will appear in the display. All CD titles will be scanned briefly. To stop CD-Scan: Press SC once again. ; lo To switch the seek tuning sensitivity level: Press button briefly. To switch between mono and stereo reception: Press button for approximately two seconds (beep). will disappear for The stereo symbol mono playback.
Regional function on/off: Press the AF button for approximately two seconds until you hear a beep. REG-ON or REG-OFF will appear in the display (see chapter REG - regional programme). > PTY (Programme Type) In the PTY mode, the preset buttons become programme type buttons. With each preset you can select one programme type, such as for example NEWS, SPORT, POP MUSIC, EDUCATE, etc.
Sydney RCM126 gb 33 30.04.2002, 16:10 Uhr
Preset Scan Press SC for approximately two seconds until you hear a beep. SCAN and the name of the scanned station will alternately appear in the display. The unit will scan all stations stored on the preset buttons. To stop Scan / Preset Scan: Press SC once again.
= AF Alternative frequency during RDS operation: When AF lights up in the display, the system will automatically seek a frequency offering better reception of the same RDS programme. AF on/off: Press AF briefly.
< TA (priority for traffic announcements) When TA lights up in the display, the system will play traffic stations only. Priority on/off: Press TA.
? SRC (source) You can switch between the different audio sources radio, tape, and CDC/ AUX (if activated). @ DIS Radio operation When pressing the DIS button, the frequency will be displayed for approximately four seconds. Tape operation When pressing the DIS button, the station name/frequency will be displayed for approximately four seconds. Changer operation (optional) To switch the display mode and select between name, time (playback time) and number (disc number): Press DIS briefly. A RM (Radio Monitor) Press this button to listen to the radio while fast forwarding or rewinding the tape. To switch RM on/off: Press RM. B
When this function has been activated, RM shows on the display panel. The radio is played back during fast tape run.

Amplifier All Blaupunkt amplifiers
Sydney RCM126 gb 36 30.04.2002, 16:10 Uhr
Displaying the radio pass data Training a second KeyCard/ Replacing a KeyCard
While operating the unit with the first KeyCard, you can train a second one to be also used with the set: Insert the first KeyCard and turn on the set. Press the DSC button and select LEARN KC with /. 37 Using the KeyCard supplied with your set you can have the radio pass data such as the model name, product number (7 6.) and serial number indicated on the display panel. Please refer to chapter DSC programming - READ KC.
Putting the unit into operation
Turn on the set. Introduce the KeyCard into the slot with the contact area showing up (KeyCard tongue sticking out). The car radio is now ready for operation. If a wrong KeyCard is inserted, then CARD

Sydney RCM126 gb

30.04.2002, 16:10 Uhr
This car radio is supplied with one KeyCard as standard, though it can also be operated with a second card. If you have lost your KeyCard or if it was damaged, you can buy a new one from your specialised dealer. When using two KeyCards, the settings stored on the first card will be adopted. However, you can individually store the following functions: Preset button assignments, bass, treble, balance and fader settings, Loudness, TA (traffic announcement volume), beep volume. In addition, the settings activated before switching the radio off, such as the waveband, station, TA priority, AF, REG ON/OFF, SCANTIME, seek tuning sensitivity and VOL FIX will also remained stored. This ensures that you will find your basic settings re-adjusted automatically as soon as you have inserted your KeyCard.

Removing the KeyCard

Never pull out the KeyCard directly! First, slightly push in the KeyCard. This releases the card and puts it in the proper position for being removed. Now you can pull it out.
ERR will appear in the display. In this case please do not make any further adjustments. The system will switch off after approximately ten seconds. When inserting another card type (e.g. phone or credit card), the display will show WRONG KC for approximately two seconds. Remove the wrong card and introduce the correct KeyCard. After the display indications CARD ERR or WRONG KC: Press ON to turn on the set.

Remove the first KeyCard and insert the new one while CHANGE is still being displayed. After the display indication READY or LEARN KC, press DSC. Now you can also use the new KeyCard for operating your unit. A maximum of two cards can be used for the set. When trying to train a third one, the access authorisation for the KeyCard not used for the training process will be deleted automatically.
Press << or >>. The display will switch to CHANGE. Push in the KeyCard. The card is released and put in the proper position for being removed.
KeyCard theft protection system
Switching the audio source
Short Additional Memory (S.A.M.)
The second KeyCard available from your specialised dealer offers you the possibility to read out any short information, which will be moved through the display, such as, for example, the phone number of your car dealer or the emergency call number of your automobile association. Please refer to chapter DSC programming - READ KC. The freely selectable text with a maximum of 48 characters can be programmed by all dealers who have the required equipment available.
Optical indication for extra security
Flashing KeyCard tongue When the vehicle is stationary and the KeyCard removed, the KeyCard tongue can be switched to flash for extra anti-theft security. For this it is necessary that the positive power supply line and the permanent +12 V lead are connected such as described in the installation instructions. Be sure that LED ON is adjusted in the DSC mode. If required, please refer to chapter DSC programming - LED. Switching off the flashlight The flashlight can be switched off by pushing in the KeyCard and lock. If you would like to deactivate the flashing tongue with general effect, adjust the relevant item in the DSC menu to LED OFF.
Using the SRC button you can switch between the following audio sources: radio, tape, changer (optional), or AUX Tape operation is only available if a cassette is inserted. AUX is only available if no Blaupunkt changer CDC A05 or CDC F05 is connected. AUX ON must be adjusted in the DSC menu. To switch to another source, press SRC briefly.

Turn On Message (T.O.M.)

The second KeyCard available from your specialised dealer also allows you to display a special turn-on message each time the radio is switched on. The freely selectable text with a maximum of 48 characters can be programmed by all dealers who have the required equipment available. The programmed text will be displayed each time you turn on your system with the second KeyCard.

If you leave the service area of the regional programme tuned into, or if you would like to take advantage of the full RDS service, switch to REG OFF. Press the AF button for approximately two seconds until REG OFF appears. REG ON or REG OFF will be briefly displayed each time the radio is switched on.
Radio operation with RDS (Radio Data System)
Scrolling through the broadcasting networks (only FM)
You can use the << >> buttons to tune in stations of your reception area. If several programmes of the broadcasting networks can be received, you can scroll through them in forwards direction pressing >>, or backwards using the << button, e.g. NDR 1, 2, 3, 4, N-JOY, FFN, ANTENNE. For this it is necessary that the stations have been tuned in at least once and that AF is active (lights up in the display). For this purpose, you may start Travelstore seek operation: Press FMT for two seconds; the system starts to run through the frequency band. If AF does not light up, press AF. With this, the requirements for selecting stations with << >> are fulfilled.
Press the FMT button as many times until the desired memory bank lights up in the display.

Storing stations

On FM, you can store six stations on the preset buttons 1-6 for each of the memory banks I, II and T. On MW/LW, you can store six stations each. Select the appropriate waveband with FMT or ML. Tune in a station with the rocker switch (either automatically / or manually << >>).
Seek tuning Up Down Down in short intervals (AF must be switched off) Up in short intervals (AF must be switched off)
Manual tuning with << >> You can also tune in a station manually. Condition: AF and PTY must be switched off (i.e. the symbols do not light up in the display). If necessary, deactivate these functions: Press AF or PTY. Manual tuning: Press << >>; the frequency will change in short intervals in downwards or upwards direction. When holding the right or left part of the rocker switch depressed, the frequency scan is speeded up. 40

Sydney RCM126 gb 40

Press the desired preset button until the radio resumes play after the muting (takes approximately two seconds, confirmed by beep). Now the station has been stored. The activated preset button is indicated in the display.
Changing the memory bank (FM) Notice:
You can shift between the memory banks I, II and T in order to store stations and recall them later. The currently selected memory bank is indicated in the display. Should you tune in a station which has already been stored before on another memory bank, the corresponding preset button and the memory bank will briefly flash in the display.

Automatically storing the strongest stations with Travelstore
You can automatically store the six most powerful FM stations of your current reception area sorted according to their signal strength. This function is particularly convenient on longer trips. Press the FMT button for two seconds. T-STORE will appear in the display. The six strongest FM stations will be automatically stored on the memory bank T (Travelstore). When this process has been completed, the radio will play the first station. If desired, stations can also be stored manually on the Travelstore bank (see Storing stations).
Scanning stored stations with Preset Scan
You can have all of the stored stations briefly scanned on all wavebands. To start Preset Scan: Press SC for approximately two seconds. All of the stored stations of the adjusted waveband will be scanned one after the other. The memory bank and preset position of the currently scanned station will flash in the display. To select a scanned station and switch off Preset Scan: Press SC briefly.

Changing the scan time

The scan time can be changed from between five to a maximum of 30 seconds. Please refer to chapter DSC programming - SCANTIME.
Scanning stations with RadioScan
You can also scan all stations which can be received. To start the Scan function: Press SC briefly. The scanned frequency or the station name will start flashing in the display. During the actual scanning process FM-SCAN or AM-SCAN will be displayed.
Selecting the seek tuning sensitivity
You can alter the automatic seek tuning sensitivity. If lo is displayed, the radio will only pick up strong, local stations (low sensitivity). If lo does not light up, the radio will also pick up weaker, distant stations (high sensitivity). The sensitivity level can be altered in both modes (see also chapter DSC programming).
You can recall any stored station at the touch of a button. Select the waveband by pressing FMT or ML. On FM, also choose the corresponding memory bank by pressing the FMT button as many times until the desired bank appears in the display.

Press the corresponding preset button briefly to recall the station. 41
Recalling stored stations
To select a scanned station and switch off the Radio-Scan function: Press SC briefly. If no station is selected, the scan function will be automatically switched off after the frequency band has been run through completely. The unit will tune in the station listened to before starting the scan.
Switching from stereo to mono (FM)
If reception is poor, you may get better sound quality by switching to mono: Press the lo button for approximately two seconds. With mono playback, the stereo sign will disappear from the display. Each time the radio is switched on, stereo playback is activated. The unit will automatically switch to mono if the received signal is not strong enough for stereo playback.

Programme type

Use << >> to have the last selected programme type displayed and to choose a new one. You can select any one of the stored types with the preset buttons 1 - 6. Condition: PTY must be active. Using DSC you can choose between German and English (see DSC programming PTY LANG). All of the programme types listed below are available. The letters printed in bold are identical to the actual short-time indication in the display. NEWS CURRENT AFFAIRS INFORMATION SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP MUSIC ROCK MUSIC M.O.R. M (middle of the road music) LIGHT M (light classical) CLASSICS (serious classical) OTHER M (other music) PTY 16 to PTY 30 are not yet assigned.
Checking the programme type of the station Press PTY for approximately two seconds. After the beep tone the display will show the programme type offered by the tuned in station. If NO PTY appears in the display, the current station has no PTY code. Displaying the selected programme type Press << or >>. The programme type selected last will be displayed briefly. Selecting a programme type a) Using the preset buttons When PTY is switched on, you can use the preset buttons 1-6 to select the programme types stored at the factory. Press one of the presets 1 - 6. The selected programme type will be displayed for two seconds. If you wish to listen to a station with this PTY, press / eration. to start seek tuning op-

PTY Programme Type

PTY is an RDS service offered by more and more radio broadcasters. This feature allows you to select FM stations according to their programme type. After you have chosen the PTY of your preference, the corresponding stations can be selected either by seek tuning or using the scan function. Switching PTY on/off Press PTY. When the function is active, the programme type selected last will briefly appear in the display. PTY will be permanently indicated in the lower right corner of the display panel. 42

Sydney RCM126 gb 42

Press << or >> as many times as required.
Scanning stations with PTY-SCAN Condition: PTY must appear in the display. Press the SC button. All received stations offering the selected programme types will be scanned. To switch off PTY-SCAN: Press SC once again.
Seek tuning is started. No station with PTY-POP can be found. The display shows NO PTY and automatically switches back to NDR3. NDR2 airs a PTY-POP programme. The system will switch to the linked station NDR2 for the duration of the POP programme. 43
press / to start seek tuning operation. If the system is unable to find a station offering the selected programme type, the display will show NO PTY and a beep tone
If you wish to listen to a station offering the selected PTY,
During this period press >> (forwards) or << (backwards) to select the desired type.
Station tuned in: NDR3. PTY lights up in the display. Programme type POP selected.
Press << or >>; the programme type selected last will be displayed for three seconds.
Select a programme type using buttons << >> and
hold down the desired preset button (1-6) until you hear a beep. Now the selected programme type can be recalled by pressing this preset. For this the PTY function must be active.
Example: German broadcasting network NDR:
b) Using the << >> buttons of the rocker switch When PTY is switched on, you can select a programme type using buttons << >>.
If the system is unable to find a station offering the selected programme type, the display will show NO PTY and a beep tone will be released. The station received before starting seek tuning will be tuned in. You can assign different programme types to each preset position. Please refer to the next chapter Storing programme types.
will be released. The station received before starting seek tuning will be tuned in. Storing programme types One programme type was assigned to each of the preset buttons 1-6 at the factory. If desired, you can also store other available programme types. To do so, make sure that PTY lights up in the display. If necessary, press the PTY button to switch on the function.
PTY priority Situation: PTY is switched on and lights up in the display. No station offering the selected programme type can currently be received (with seek tuning or scan). The set will switch back to the previous station. As soon as a programme with such PTY can be received within the broadcasting network, the unit will switch over to the corresponding station for the duration of the programme.

Selecting titles with S-CPS
(Super Cassette Programme Search) Use this function to skip ( ) and repeat ( ) recorded titles. A maximum of nine titles can be skipped. To do so, press the rocker switch as many times as required. The number of titles to be skipped appears on the display panel. If necessary, you can correct your entry by pressing the opposite rocker switch button. Stop by pressing For a proper operation of the S-CPS function there has to be an unrecorded tape

Removing a tape

Press. The cassette will eject.

Tape equalisation

When a metal or CrO2 tape is inserted, the tape mechanism automatically adjusts to metal/CrO2 tape equalisation. The MTL indicator will illuminate.
Sydney RCM126 gb 46 30.04.2002, 16:10 Uhr
Scanning cassette titles with SCAN
You can have the cassette titles played briefly by using the scan function. If you like a title, stop the scan to continue listening to that track. To start/stop the scan function: Press the SC button briefly. You can individually adjust the scan time in the DSC menu (see DSC programming SCANTIME).
Skipping unrecorded tape portions with Blank Skip
This function senses an unrecorded tape portion continuing for more than 15 seconds and automatically fast forwards the cassette to the beginning of the next track. During fast tape winding, B-SKIP will be indicated on the display panel. To switch the Blank Skip function on and off: Press the RM button for approximately one second until you hear a beep. When the function has been activated, BLS will appear in the display.

Care notes

To avoid possible problems, we recommend you to use C-60/C-90 type cassette tapes only. Store your tapes in a cool place away from dirt, dust and temperatures exceeding 50 Celsius. Allow very cold tapes to warm up before playing them in order to avoid uneven tape transport. After approximately 100 hours of use, dust particles collected on the playback head or roller may lead to tape run problems and sound distortions. Use a head cleaning tape to remove normal dirt build-up. For tougher cases, use a cotton swab (Q-Tip) soaked with alcohol. Do not attempt to clean by inserting a hard object into the player!

Dolby B NR*

With this unit you can play back tapes recorded with Dolby-B NR or without noise reduction. Cassette tapes recorded with Dolby NR* stand out by their reduced tape hiss and the improved dynamics. If Dolby-B NR is switched on, B will light up in the display. To switch on/off: Press B (not during scan operation).
. * Noise Reduction system manufactured under license from Dolby Laboratories Licensing Corporation. Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

Listening to the radio during fast tape winding with RM (Radio Monitor)
When the tape is fast forwarded or rewound (also with S-CPS), the radio will normally be muted. To listen to the radio during fast winding, activate the Radio Monitor function. To switch RM on and off: Press RM. When the function is active, RM will light up in the display.
Sydney RCM126 gb 47 30.04.2002, 16:10 Uhr
CD changer operation (optional)
This car stereo offers you convenient control of a Blaupunkt CD changer CDC-A05 or CDC-F05. These changers are not included in the scope of delivery and can be purchased from your specialised dealer.

Selecting CDs and titles

MIX MAG CDC-A 05 / -F 05 All CD titles will be played at random. The next disc will then also be selected and played randomly, etc. MIX OFF The Mix function is deactivated. Discs and titles will be selected in numeric order. To alter the setting: Press MIX as many times until the desired function is briefly displayed. If the function is active, MIX will appear in the right display corner.
Switching to CDC operation
Make sure that at least one CD has been inserted into the magazine. Press SRC to go through the available audio sources: Press as many times until the display briefly shows CDC ON.
CD selection Up Down Title selection Upwards: Press briefly. CUE - fast advance (audible): Keep depressed. Downwards: Press as many times as required. To restart a title: Press briefly. REVIEW - fast reverse (audible): Keep depressed.
Selecting the display mode
You can select the desired display mode for CD operation: NAME The specified name, for example MADONNA will be displayed. The elapsed playback time of the title is displayed, for example 2 : 32. The CD position in the magazine (disc number) is displayed, for example CD8 T5.

MIX playback

You can have the CD tracks played in random order. MIX CD The titles of the selected CD will be played at random. The next disc will be selected in numeric order. TIME

NUMBER

Sydney RCM126 gb 48 30.04.2002, 16:10 Uhr

Entering CD names

You can name up to 99 discs. The specified name (e.g. VIVALDI) will then appear in the display. Be sure to select the display mode NAME using the DIS button. To start the entry: Press the DSC button. CDC-NAME will be displayed. Press. The first underscore character will flash. Select the first character with the help of the rocker switch /. You have the choice between the capital letters A to Z, special characters and the numbers 0 to 9. Use the rocker switch << >> to move to the next underscore and select a character. You can select up to seven characters.

Press the DSC button. Press / to select CDC UPD.

SCAN operation

Use this function to scan all of the CD tracks. To start the Scan function: Press SC. The titles will be scanned one after the other in ascending order.
Sydney RCM126 gb 49 30.04.2002, 16:10 Uhr
Press << >>. After the update has been completed, NEXT MAG appears in the display. Press the button on the changer for approximately two seconds. The magazine will eject. Insert the next magazine.
Hold down the DIS button until you hear a beep.
You can store your preferred display mode which will then be active each time the radio is switched on. If required, press DIS as many times until the desired setting is displayed.
You can delete a CD name with the help of the DSC update function. Use CDC UPD to confirm all of the CDs for which the specified name is not to be deleted. Insert a magazine with CDs for which the stored information is to be maintained.

Storing the display mode

Deleting CD names with DSC-UPDATE
To switch the display mode: Press DIS during CD playback. The display mode and the corresponding setting or value will briefly show on the display panel, e.g. TIME, 2 : 32. If you have selected NAME without having specified a name for the corresponding disc, CD PLAY will appear in the display. Please read also the chapter Entering CD names.
SCAN will also be terminated by pressing one of the buttons AUD, GEO, DSC, SRC, , << >> or /.
To stop the Scan function: Press SC briefly. The track currently being scanned is continued to be played.
Once you have completed the name as desired: in order to store it. Press To quit the naming mode, leave the DSC menu by pressing DSC. If you would like to name another CD, select a new disc. You can change any existing name by entering and storing a new one (overwriting).

DSC programming

Proceed as described above for all of the CDs/magazines for which the entered name is to be maintained. After having updated the last magazine, press. To quit the function, press DSC. The system has saved the name information for all of the CDs which were inserted. For all other discs the CD names have been deleted. DSC (Direct Software Control) allows you to customise certain programmable, basic settings to suit your personal needs and preferences and then store them. The basic settings for this audio equipment were made at the factory. In the following you can find an overview of these settings, so that you can always reset to these if desired. If you wish to alter any of the programming, press DSC. button to Use the rocker switch and the select and adjust the functions described in the following. The display will show you the adjusted condition. CDC NAME Only available for CD changer playback (optional). Use this function to name your CDs. (See Entering CD names). LOUDNESS Loudness - When listening at a low level, the Loudness function creates a more natural sound by boosting the low frequency range. LOUD 1 - Low boost LOUD 6 - Max. boost TA VOL To adjust the traffic announcement and warning beep volume from between 0 to 63. The message will then come through at this volume, if the standard volume is lower. Should the standard volume be higher than the TA VOL level, then the traffic report will be played slightly louder than the standard volume.

/ << >>

Select function Adjust/recall value
Sydney RCM126 gb 50 30.04.2002, 16:10 Uhr

SPEECH

In future many RDS radio stations will differentiate between music and speech programmes. You can alter the tone for speech programmes from between SPEECH 0. 4. SPEECH 0: Music/speech off SPEECH 1: Linear reproduction (bass, treble and Loudness set to 0) SPEECH 2-4: Different settings for volume, bass and treble with the Loudness being switched off. Try out which SPEECH setting you like most.
Use this setting to alter the viewing angle to your liking from -1 to 0 to +1. You can adjust the display brightness from between 1 to 16. You can also select different values for day and night. Selecting the night brightness: Switch on the vehicle lights and programme the brightness value. The car radios lighting connector must be hooked up to the vehicles electric system for this to function properly. LEARN KC
the unit has been switched off and the KeyCard removed. To train a second KeyCard. Please read the information in chapter KeyCard theft protection system - Training a second KeyCard. To read out the KeyCard data. The card supplied with the radio is used to display the model name, type number (7 6.) and the serial number. With the extra card it is possible to display the Short Additional Memory (S.A.M.) data entered by your specialised dealer. See chapter Short Additional Memory S.A.M. If you remove the KeyCard during the reading process, READ KC will show on the display panel. The unit continues to play but does not

BRIGHT

Sydney RCM126 gb 51 30.04.2002, 16:10 Uhr
Acknowledgement tone for all functions which require a button to be pressed for more than one second. The volume can be adjusted from between 0 to 9. (0 = off).
COLOUR (Variocolour) For gradually matching the radio illumination with the dashboard lighting. green. light orange.. red LED ON Here you can choose between LED ON or LED OFF. With LED ON, the KeyCard tongue will flash for extra anti-theft protection when

READ KC

accept any operations except from being switched off. Re-insert the card. PTY LANG To select the programme type language: DEUTSCH or ENGLISH Use this function to set the scan time for the radio or CD player from between five and 30 seconds. To adjust the seek tuning sensitivity for distant reception. DX 1 - high sensitivity DX 3 - low sensitivity To adjust the seek tuning sensitivity for local reception. LO 1 - high sensitivity LO 3 - low sensitivity The seek tuning sensitivity values can be separately set for AM and FM.

CD-Scan

MIX OFF

Preset Scan

TA (Traffic Announcement =
Sydney RCM126 gr 7 30.04.2002, 16:11 Uhr

2 u u SC. A SCAN u

) TA ,
SC. H FM SCAN u u , u. FM u uu, .
E u u . . E / : u 2 u ( ). , .
u PT u u u. , . , , u,.

PTY Programm Tpe (E )

H u MIX . X, u u u u.
SC. H CDC-SCAN . T u CD . u CD-Scan: SC.

MIX MAG

A CD u. E CD u.
E u AF (Alternativ Frequenz) u RDS: AF, u, u RDS, u . AF on / off: AF. E / u : 2 u AF. A , REG ON REG OFF (. K. T REG).

MIX CD

u . u u u . u Scan / Preset Scan. SC.

. TA on / off: TA.

SRC (Source = ) E u uu: u, u CDC/AUX ( ). DIS
u u E DIS, 4 u u u. u u E DIS, 4 u u u. u Cd-Changer ( ) E Cd . DIS.

u u u, RM. .

FM, .
1, 2, 3, 4, 5, 6 - u (, T) FM u 6. MW LW 6. Au - u u u, u ( ). A - FM u. . E u: Au u PT. u PT ( PT ), ,

Y T ( u A 1 ).

u uu u. TR 1 TR 2.

RM (Radio Monitor)

u u u u. E / RM: RM.
* Dolb Laboratories. H Dolb u D Dolb Laboratories.
Dolby B NR* Dolb B NR , B.
Loudness - u , u Loudness on / off: LD. u u
Sydney RCM126 gr 8 30.04.2002, 16:11 Uhr
DSC (Direct Software Control) DSC u u u. K. DSC.
u GEO Balance Fader (. GEO ).
Sydney RCM126 gr 9 30.04.2002, 16:11 Uhr
H u u. A u GEO: . A 4 u , .
H u u. A u AUD: . A 4 u , .
Fader Fader Balance Balance

, LD. : DSC.

GEO Balance ( / ) Fader ( / ).

AUD Treble () .

u , u u.
A u, . u uu - uu u u u. N . u , u u ! u Telefon-Mute u. , 50 u / u uu, u 14. u u u u, u, Changer u u. (Telefon-Mute). T u . PHONE. u u u TA , u u. H , uu. u TA. u u.
X Blaupunkt. uu u Blaupunkt:
Changer CDC A 05 CDC F 05. T T uu RC 05 u u u .

Eu u Blaupunkt.

Sydney RCM126 gr 10 30.04.2002, 16:11 Uhr
Sydney RCM126 gr 11 30.04.2002, 16:11 Uhr
uu u . KeyCard , KeyCard u .

A KeyCard.

u KeyCard!

KeyCard. H KeyCard u.

H uu KeyCard, u KeyCard. A KeyCard u , u u KeyCard. A KeyCards, u u KeyCard. u u u u u: K , , (Treble), Balance Fader, Loudness, TA ( u ), u . E u, u u, , TA, AF, REG ON / OFF, u (Scan), u u VOL FIX. , KeCard uu , u u .

A KeyCard

A KeyCard KeyCard CHANGE . READY LEARN KC DSC. H uu u KeyCard. A uu KeyCards. A KeyCard,
H uu u. A KeyCard u, CARD ERR . u uu. 10 u uu u. u (. ), u 2 u WRONG KC. A KeyCard u uu. u CARD ERR WRONG KC N

A KeyCard / A KeyCard

H uu KeyCard KeyCard, KeyCard.
DSC LEARN KC /. << >>. H CHANGE.

KeyCard, u.

KeyCard u uu.

u u KeyCard u .

KeyCard u u , u uu u u . KeyCard u u u uu u u u u , , u uu . 48 . H K. DSC - READ KC. K u uu u, u. Short Additional Memory
Turn On Message (T.O.M.) ( )

LED N. E , K. DSC-LED.

A H , KeyCard, , u. E , u LED OFF DSC.

u KeyCard

(S.A.M.) ( )
H KeyCard u u , u u u READ KC DSC,. uu, u. u u 48 . 12

Sydney RCM126 gr 12

u KeyCard, KeyCard u . : T u u u , . u DSC
H u KeyCard , uu . A u . KeyCard, u , u.
Sydney RCM126 gr 13 30.04.2002, 16:11 Uhr
H u AF (Alternative Frequency) u u u u . H u AF , AF. AF on / off:
E u AF (Alternative Frequency)

T (REG)

ou u . , 1 u NDR ( ) (Schleswig Holstein, Hamburg Niedersachsen) u u. E ,
SRC (Source = ) u u uu : , K, Changer ( ) AUX H u u u u u. E AUX, u Changer Blaupunkt CDC-A 05 -F 05. u AUX ON DSC. E u u uu: SRC.
T Radio Data System u u u. u, u , RDS. uu , u u , u,. NDR 1 NDS (K ). T u RDS . u u. T RDS :
H u. E, uu u u, SEARCH, uu u u. H SEARCH , u u. A u u ,
E u u u u RDS (Radio Data System)
AF 2 u u. REG ON. E u u u u RDS, REG OFF.
AF 2 u u, u REG OFF. K u u uu, REG ON REG OFF.
u / /. H uu u X :. <</>>. H A u , u / . . A <</>>, u, u u u.

E , u u: AF PT.

: u (FM) 87,5 - 108 MHz, (A) 531 - 1602 kHz (LW) 153 -279 kHz.
Au ( AF u) ( AF u)

Au u ( FM)

u: L.

u u u u FMT L.

X <</>> H . : u AF TY ( ).
<< >> . A , >> ( ) << ( ) ,. NDR1, 2, 3, 4, N-JOY, FFN, ANTENNE. A , u u u u u AF ( ).
Sydney RCM126 gr 14 30.04.2002, 16:11 Uhr

u . u Travelstore:

DSC DSC. A CD CD. (u ).

CD DSC-UPDATE

u DSC CDs. u CDC UPD (Update = ) CDs. T CDs, u . DSC. / u CDC UPD . << >>. , u NEXT MAG. 26

Sydney RCM126 gr 26

A u u DSC. H CD u u u, u .
Changer u 2 u. H . T . E CDs, . u .
H uu u DSC (Direct Software Control) u u u . H Blaupunkt u, u . A ,
DSC. u u u u u u u u. u u.

<< >>

E u /

30.04.2002, 16:12 Uhr

CDC NAME E
Changer ( ). u u CDs. (B. K CD). . LOUD 1 - LOUD 6 -

SPEECH

LOUDNESS Loudness

TA VOL

Sydney RCM126 gr 27 30.04.2002, 16:12 Uhr
u , u 0 - 63. T u u u, u . A , u u u.
, u RDS u u . u u 4 u SPEECH 0. 4. SPEECH O: A u / SPEECH 1: (, , Loudness 0). SPEECH 2-4: u, , u Loudness. E u u. u,

BRIGHT

u 1 - 16 . K : . : u u.
-1, 0, +1, u u u. H ANGLE u .
1 u. H u u 0-9 (0 = u).

COLOUR (Variocolour) B u

LED ON
LED ON LED OFF. H KeyCard LED , uu u KeyCard. KeyCard. u u K. KeyCard A KeyCard.

LEARN KC H uu

READ KC
u u uu KeyCard. KeyCard u
u uu u u u u , u (76.) uu . , u u u , u , u (. Short Additional Memory S.A.M.). A KeyCard . READ KC. H uu u u, u u. T KeyCard .

PTY LANG

u : E .

SCANTIME K

u (5 - 30 u) u u CD. u u. DX 1 - Y u DX 3 - K u u LO 1 - Y u LO 3 - K u H u AM FM.
Sydney RCM126 gr 28 30.04.2002, 16:12 Uhr

CDC UPD

u Changer, CDs, u CDs. (B. CD DSC UPDATE). T u u CD-Changer (A 05 F 05). H Blaupunkt u AUX OFF. A u AUX uu, AUX ON.

A T DSC / Au u: Eu

A u: 30 - 18000 Hz
Sydney RCM126 gr 29 30.04.2002, 16:12 Uhr

VOL FIX

CD NAME LOUDNESS TA VOL SPEECH BEEP ANGLE BRIGHT COLOUR LED LEARN KC READ KC PTY LANG SCANTIME u S - DX S - LO u CD UPD. E AUX u u u VOL FIX << >>. A u VOL 0, uu, u u u u.

ON A 10 u OFF 0

E FM: 87,5 - 108 MHz A: 531 - 1602 kHz LW: 153 - 279 kHz Eu FM: 0,9 V 26 dB / u A u FM: 30 - 16000 Hz

u DSC Blaupunkt

DSC.
u: 4 x 23 Watt Sinus DIN 45324 14,4V 4 x 35

BLAUPUNKT,

1. , . , . . , , , , . 2. (12) . 3. . 4. , 1. : . . , .