Radio / Cassette

Valencia CM 127

Operating instructions

Valencia CM127 d

28.01.2004, 9:22 Uhr

Table of contents
Features..... 21 Traffic safety and precautions.... 22 Important note..... 22 Detachable face (release panel).... 23 Location of controls.... 24 Instructions general operation.... 26 Audio operation.... 27 Radio operation..... 28 Tape player operation.... 29 Changer control (when optional CD changer is connected)... 30 DSC menu (Direct Software Control)... 33 Infrared eye for wireless remote control.... 36 Auxiliary input jack (cable connection with 3.5 mm pigtail coupler).. 36 Specifications.... 37
Blaupunkt Telephone Hotline
Address of the next service centre in your vicinity (only for Germany)
If you would like to know the address of the next Blaupunkt service centre of your area without having our service list at hand: - Find out your area code. Then call the following chargeable phone number: / 56 66. Using the area code to be entered you will be automatically given the address and phone number of the next Blaupunkt service centre. You can also request this information by fax.

Valencia CM127 gb

28.01.2004, 9:30 Uhr
Its high-power amplifier and 4-channel preamp output provide you with tremendous system configuration flexibility. Its auxiliary input jack lets you easily incorporate portable audio equipment, such as a portable tape or DAT player, into your cars sound system. Radio features - Codem III concept, i.e. new tuner, assessment of multipath interference, automatic noise suppression (ASU), gradual mono/stereo switching, volume control as a function of signal strength. - Superior AM frequency response - 18 FM/6 AM presets, including 6 FM and 6 AM Travelstore presets - Station and preset scan - Station naming - Tuner timer - Local/distant seek and manual tuning Tape player features - Full-logic autoreverse cassette mechanism - S-CPS (Super Cassette Program Search) - Fast forward and rewind - Radio monitor - Tape scan - Adjustable blank skip CD changer control features (optional) - CDC-A 05 changer control - Disc naming, disc list - Disc/track up/down - Disc/track scan, repeat, track mix - Track Program Memory (TPM) - Cue/review, pause/play Audio features: - 35 watts x 4 channel integrated amplifier - 4-channel preamp output - Bass, treble, balance and fader control - Source tone memory - Programmable Loudness - Mute, also when using cellular phone - Auxiliary input Other features: - DSC menu (Direct Software Control) - Integrated infrared eye for RC 06 H wireless remote control (optional) - Detachable face with hard-shell case - Illumination - Clock recall - 179 x 50 x 150 mm DIN/ISO chassis - Detachable wire harness - Snap-in DIN sleeve and mounting hardware
Your units detachable faceplate makes the unit useless to would-be thieves.
Designed, engineered and manufactured by Blaupunkt.

PORTUGUS

ESPAOL

SVENSKA

NEDERLANDS

ITALIANO

FRANAIS

ENGLISH

DEUTSCH

Features

Traffic safety and precautions
Do not adjust your unit in difficult driving conditions that demand your full attention. As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation at all times. Never use your unit in a way that could distract you. Always make sure that you are still able to hear any warning signals coming from outside of the vehicle, such as police or fire engine sirens, so that you can react accordingly. If your vehicle was parked in direct sunlight resulting in a considerable rise in temperature inside the vehicle, allow the unit to cool off before operating it.

Important note

You fill find a label enclosed to the car radio. We recommend to attach the label at the panel behind the detachable face. The label will then be visible each time you have detached the face in order to visualise that the car radio is protected against theft.
Detaching and attaching the face: The face of this unit can be detached and taken with you to prevent it from being stolen. Detaching the face: Press the REL (release) button and detach the face by gently pulling it off as illustrated. Note: Do not pull it straight out from the chassis. Be sure not to drop the face when detaching it from the chassis. When carrying the face with you, put it in the carrying case. Do not expose the face to direct sunlight, heat sources such as hot air ducts or leave it in a humid place. Attaching the face: Apply the right hand side of the face to the chassis by sliding (part B) of the face to (part A) at the front of the chassis. Gently push the left side of the face against the front of the chassis until it snaps into place. Note: Do not press against the display window. Do not press hard against the face when attaching it to the chassis, it may be easily attached with gentle pressure. Cleaning the connectors The unit may not operate properly if the connectors between the unit and the face are contaminated with dirt. In order to prevent this from happening, remove the face from the unit by pressing REL (release button), then detach it and clean the connectors from time to time. Clean the connectors with a cotton swab and isopropyl alcohol (90% or higher). Be sure to clean them with a vertical motion. Never clean them horizontally, because this could damage the contact points. Affixing the faceplate for retail display: The faceplate can be affixed to the units chassis, which is desirable for a retail display, for example. To affix the faceplate: Insert the black bolt into the hole at the left front of the top of the radio. See * below.

Detachable face (release panel)

Location of controls

REL AUDIO
Release for detachable faceplate Audio mute Bass, treble, balance, fader access Name storing/deletion in DSC menu Minute: 00 Station scan Cassette track scan Disc track scan Disc scan
Lens receiving for wireless remote control RC 06 H (optional) SCA (scan)
PS 5 DIS (display) MENU SRC LIST + ON
Preset scan Display change Demo mode display on/off DSC menu on/off Cassette program change Cassette eject Audio source select List of disc names Volume up Volume down Power on/off Manual tuning down Bass - / treble - / balance to left Menu feature adjust Name character position Fast rewind Disc track down Review List mode disc select

Cassette insertion slot

Display RPT FM FMT
Display Track repeat and disc repeat FM band FM preset bank I, II, III select FM Travelstore Track play in random order AM band AM Travelstore Pause Loudness Seek tuning sensitivity adjust FM/AM presets TPM store TPM play TPM clear
MIX AM AMT LD SENS (Sensitivity) 1, 2, 3, 4, 5, 6 TPM (Track Program Memory)
Manual tuning down Fade to rear Menu feature select Name character select S-CPS down Disc down
Seek tuning up Fade to front Menu feature select Name character select S-CPS up Disc up
Manual tuning up Bass + / treble + / balance to right Menu feature adjust Name character position Fast forward Disc track up Cue List mode disc select
Instructions general operation
See Traffic safety and precautions on page 22. Press means a momentary press of less than 1/2 second. All presses requiring more than 1/2 second are followed by a beep. Time Out - When additional button presses are anticipated to complete a procedure, the unit will automatically exit the procedure after 4 seconds of inactivity (8 seconds in the DSC mode). Ignition on The unit lights up and the clock is displayed, provided it has been set before. Otherwise, 12:00 appears. How to set the clock is described under DSC Menu. Demo mode The unit is programmed to scroll some key features across the display if no button is presses for one minute. To turn this off, turn the unit on and press DIS for 8 seconds until DEMO OFF appears. Pressing DIS for 8 seconds again will re-activate this feature. Power on When the ignition on, press ON or insert a tape to turn the unit on. The last-used source becomes active, unless the unit is turned on by inserting a cassette, in which case cassette player becomes active. Audio source Use SRC to select the audio source: radio or cassette (if already inserted,) CD changer (if connected) and/or external unit (AUX IN display). Display options When turning on the audio source, various displays are shown in sequence. Radio: Station name (if named) > frequency > clock Cassette: TAPE 1 or TAPE 2 > clock CDC: Disc name (if named) or disc no. > disc no. and track no. > track no. and elapsed play time > clock AUX: AUX IN > clock Press DIS repeatedly to select the display you wish to see permanently. Power off Press ON for more than 1/2 second to turn the unit off. Release for detachable faceplate Push REL (release) to detach the face. An already inserted cassette remains in the unit. The current settings and the source mode are stored. If power was not switched off before removing the face, the unit will automatically power-on when the face is reattached.

Volume control Press + and to increase/decrease the volume from 0 to 63. Mute key to temporarily reduce the volume. MUTE appears. Press again to Press the terminate the mute function. Audio is muted automatically, if a cellular phone is connected and in use. TEL MUTE appears. Cellular mute is ended by ending the cellular telephone use. For adjusting the mute volume level, refer to Chapter DSC Menu. Bass, treble, balance and fader Bass Press and hold the AUDIO button until BASS appears and then press immediately to increase or decrease bass in intervals between 7 and -7.
Treble Press and hold the AUDIO button until BASS appears. Then press AUDIO once again so that TREB appears. Now press immediately or to increase or decrease treble in intervals between 7 and -7. Balance Press and hold the AUDIO button until BASS appears. Then press AUDIO twice so that or to adjust the left/right volume BAL/FADE appears. Now press immediately between L9 (left) and R9 (right). Fader Press and hold the AUDIO button until BASS appears. Then press AUDIO twice so that BAL/FADE appears. Now press immediately or to adjust the front/rear volume between F9 (front) and R9 (rear).
Automatic source tone memory Bass and treble adjustments made are source specific, allowing different settings for each source (radio, cassette, CD changer or external unit). Loudness Press LD to increase the sound of low and high frequencies. The LD icon appears. To cancel, press LD again. The Loudness level can be set separately for each audio source (radio, cassette, CD changer or external unit). Refer to Chapter DSC Menu.

Audio operation

Radio operation
FM and AM buttons You can chose between FM and AM band (medium frequency band). Press FM or AM. Three memory banks are available for FM. When in FM radio mode, press FM to advance to the next FM band, FMI, FMII, or FMIII/FMT (Travelstore). Tuning sensitivity Press SENS for more that 2 seconds to switch between lo and dx search sensitivity. In general, set SENS to lo when in metropolitan areas or where stations tend to be strong and local, and to dx if in rural areas or where stations tend to be weak and distant. Seek tuning Press or to seek the next receivable radio station. Tuning stops at the next receivable station. Manual tuning Press or and the frequency will go one channel/step in the direction pressed. Press and hold causes continuous manual tuning. Preset station storage After tuning to the desired radio station on the desired band, press and hold a preset button for more than 2 seconds to store the current frequency. Audio is muted during the storage, the preset number appears, and a beep acknowledges the storage. The number of the selected preset appears in the display. Preset station selection Press the desired preset button. Travelstore You can automatically store the six strongest stations in decreasing order of signal strength. This function is especially useful when travelling. Press the FMT button for 2 seconds to activate FM Travelstore. In the AM band, press the AMT button for 2 seconds to activate AM Travelstore. T STORE appears for a moment. Starting at the beginning of the band, Travelstore stores the six strongest stations and returns to preset 1. Station Scan To scan all receivable stations, press SCA. STA SCAN appears, then the frequency blinks (along with the preset number if appropriate) during scanning. The unit continuously scans until the user stops scan by pressing SCA. The scan time can be varied (see Chapter DSC Menu). Preset Scan Press PS for more than 2 seconds. PS SCAN appears, then the frequency and the preset number blink during scanning. The unit scans all presets one after another. Press PS again to cancel Preset Scan. The scan time can be varied (see Chapter DSC Menu). Note on radio reception When listening to weak or distant AM stations, adjusting the treble to minimum (-7) will reduce noise and improve sound. Stereo symbol The stereo symbol turns on if a stereo station with an incoming signal of sufficient quality is received. The unit gradually switches between mono and stereo automatically.

Cassette insertion and eject LOADING appears upon insert and cassette play follows. Press the eject. EJECT appears and the radio plays.

key for a motorized

Cassette fast winding Press to activate fast rewind (FAST REW appears). Press (FAST FWD appears). Press or to stop fast winding.

to activate fast forward

Super-Cassette Program Search Press or once for each track you wish to advance or go back. SEARCH will blink plus the number of tracks, e.g. SEARCH 4 or SEARCH- 4. If is pressed more times than the current track value, the tape will fast-rewind and begin to play at the first track. If is pressed more times than there are tracks, the tape will advance to the end of the tape, autoreverse and begin play. To stop the S-CPS function, press or. Radio Monitor Radio can be heard during tape winding. When activated, the RM icon appears. The preset stations on the last-heard band are available during tape winding. How to turn this function off is described under DSC Menu. Tape track repeat To play the currently selected track repeatedly, press RPT. RPT I appears. While automatically rewinding to the beginning of the track, FAST REW appears. To cancel, press RPT again. Track scan Press SCA to start track scan. TRCKSCAN blinks during the scanning operation. The unit briefly plays each track. The scan time can be varied (see Chapter DSC Menu). If Radio Monitor is activated, radio play is heard while advancing to the next track. At the end of the tape, the unit reverses and continues to scan the new side. The unit continuously scans until the SCA button is pressed. Pause To pause, press. PAUSE appears. To cancel, press again.
Pinch roller release During tape pause, or during change to another source, or during power off, the units pinch feature automatically activates, protecting tape and tape head. Blank skip When the unit reaches a blank section of the tape, it can automatically fast-forward to the next recorded section. How to adjust the length of pause is described under DSC Menu.
Cassette program selection TAPE 1 indicates that the top side of the tape is in play; TAPE 2 refers to the bottom side. to reverse the tape direction during playback. The tape automatically changes the Press direction at the end of the tape.

Tape player operation

Changer control (when optional CD changer is connected)
Your radio is ready to control the Blaupunkt CD changer CDC-A 05 with the Disc Management System. The changer is not included in the delivery. See your Blaupunkt dealer for more information. At least one disc must be inserted in the changer magazine. Press SRC as needed until CHANGER appears. Track up/down Press and to select tracks. The disc number and track number appear. Pressing will restart the current track if not more than 1 second of the track has been played. If less than 1 in the second has been played, the unit goes to the beginning of the previous track. Pressing last track will select the next disc. Track cue and review Press and hold or for audible cue or review.

Naming discs Assigning a name to a disc makes it much easier to locate the disc later on. How to store a name is described under DSC Menu. Disc select by name Press / to select discs. For easy identification of discs, the disc name appears immediately. The disc number appears if the disc has not been named or identified since the magazine was inserted. Disc name list This feature allows you to scroll through the names of the discs inserted in the changer without leaving the currently playing disc. Until the changer has the chance to identify the discs in a newly inserted magazine, the names of any named discs are not available. 1. Press LIST for more than 1/2 second to access the LIST mode. A small L appears in the left-most position of the display. 2. Use and to scroll though the names. The disc number appears if the disc has not been named and identified since the magazine was inserted. 3. When you have found the name of a disc that you want to hear, press or and the changer automatically goes to that disc. If no new disc is selected, the LIST mode automatically ends after 5 seconds. Track repeat To play the current track repeatedly, press RPT as needed until RPT I appears. To cancel the repeat function, press RPT as needed until the RPT indicator disappears. Disc repeat To play the current disc repeatedly, press RPT as needed until RPT II appears. Once all tracks on the disc are played, the disc is repeated. To cancel the repeat function, press RPT as needed until RPT disappears. Track mix Press MIX as needed until MIX I appears. This also cancels repeat, scan, and TPM features, if previously active. Once all tracks have been played at random, the next disc is selected. To cancel track mix, press MIX as needed until the MIX indicator disappears. Disc mix Press MIX as needed until MIX II appears. Once all tracks on the disc have been played, the next disc is selected and played at random. To cancel MIX II, press MIX as needed until the MIX indicator disappears.
Permissible combinations of MIX and RPT Pressing MIX during RPTII mixes all of the tracks within one disc continuously. To cancel this combination, press RPT once and MIX twice. Pause To pause, press. PAUSE appears. To resume playback, press again.
Track scan Press SCA to start track scan. TRCKSCAN appears. The track number and the elapsed play time blink during the scanning operation. The unit scans each track. The scan time can be varied (see Chapter DSC Menu). After scanning all tracks on the disc, the unit advances to the next disc. The unit continuously scans until the user stops scan by pressing SCA. Disc scan Press SCA for more than 2 seconds to start disc scan. DISCSCAN appears. The disc names (or if unnamed, the disc numbers) blink during the scanning operation. The unit scans each disc. The scan time can be varied (see Chapter DSC Menu). The unit continuously scans until the user stops scan by pressing SCA. Changer reset In the unlikely case of CD changer trouble, reset the CD changer by turning the units power and/or ignition off, and then turn the unit on again. Programming tracks with TPM (Track Program Memory) This feature allows you to play only those tracks you want to hear. 1. In CD changer mode, select the disc you want to program. 2. During regular play mode only, select the track to be added to the program. (TPM must be off.) 3. Press and hold TPM until TPMSTORE appears. The plus symbol (+) will appear in leftmost display position. This indicates that the disc track is programmed. 4. Select the next track to be programmed using the and buttons. Press and hold TPM until TPMSTORE appears. 5. Select other discs as desired using the / controls and repeat the steps 2-4 to program tracks of other discs. Running track program Press TPM to activate the TPM program. TPM appears. If TPM is pressed when no programming has been entered, NO PROG appears. Press TPM again to cancel this function. The TPM indicator disappears. TPM track up/down To advance and go back within the program, use the and buttons.

TPM scan Press TPM to start the TPM program. Press SCA. TRCKSCAN appears briefly. The track number and the elapsed play time blink during the scanning operation. The programmed tracks will be scanned in order starting with first programmed track. Press SCA to end scan and to listen to the desired track.
TPM disc up/down Pressing or during TPM play advances to the next disc that has been programmed.
Clearing track programming To delete a single track : 1. First, press TPM to start TPM play. 2. Select the track you want to delete from the program. 3. Press and hold the TPM button. A beep sounds after 2 seconds. If the button is released between 2 and 4 seconds, TPM CLR appears and one track is deleted from the program. To delete all tracks from one disc: 1. First, press TPM to start TPM play. 2. Select the disc you want to delete from the program. 3. Press and hold the TPM button. A beep sounds at 2 seconds and 4 seconds. If the button is released between 4 and 8 seconds, TPM CLR appears and all tracks on that disc are deleted from the program. If the name re-appears, the + programming symbol will no longer appear. To delete all track programming from all discs (whether or not inserted in the magazine): 1. First, press TPM to start TPM play. 2. Press and hold the TPM button. A beep sounds at 2 seconds, 4 seconds, and 8 seconds. If the button is released after 8 seconds, TPM CLR appears and all programming on all discs is deleted. If the name reappears, the + programming symbol will no longer appear.
Blaupunkts exclusive Direct Software Control Menu has many unique features that allow you to customize the unit to your needs and preferences. Using the DSC menu: 1. Press MENU for 2 seconds to access the DSC menu mode. 2. Press the / controls to scroll through the DSC menu. or to change menu settings. 3. Use 4. After 8 seconds or by pressing the MENU button the unit exits from the DSC menu. All changes are stored when leaving the DSC menu manually or automatically. Turn-on message activation (MSG ON/MSG OFF) Press or to turn the message on or off. Turn-on message programming (MSG ENTR) The unit can scroll a 40-character message across the display at the time of turn-on. To create your own message: 1. Press the button. Eight hyphens appear with the first one blinking. 2. Press / to select the desired characters. If you want to put a blank space in name, select _. 3. Press to locate the next character. 4. After the eighth character (the farthest right character) is completed, the first (left-most) character of next group of eight characters begins to flash. After the fifth group of eight characters, pressing will access the first group again. 5. Press AUDIO to store the turn-on message and to store the message. Clock adjustment (CLOCKSET) Pressing or shows the blinking time. Subsequent press of advances the hour; advances the minutes. Press AUDIO to adjust the minute to :00. The unit begins keeping the time when or is pressed or when the DSC menu mode ends. Tuner timer on/off (TMR ON/TMR OFF) The tuner timer allows the unit to go to a certain frequency at a certain time from any audio source. When the ignition is on and the unit off, the timer even turns the unit on and goes to the or to turn the tuner timer on or off. specified frequency. Press Tuner timer set mode (TMR SET) 1. Before entering the DSC menu, tune in the radio frequency to be activated by the timer. 2. Access the DSC menu mode and scroll to TMR SET by pressing or. 3. Press or to enter the timer adjustment mode. button to 4. Select the time at which the unit should switch to this station by pressing the adjust the hours and the button to adjust the minutes. Press AUDIO to adjust the minutes to :00. 5. To store the station and the time, press MENU. Radio Monitor (RM ON / RM OFF) Allows the radio to play during tape winding. If this feature has been activated, the RM icon appears when a tape is in use. Press or to turn Radio Monitor on or off. Blank skip time (BSKPTIME) When the unit reaches a blank section of tape, it can automatically fast-forward to the next recorded section. Use and to chose a minimum amount of blank time before blank skip begins from between 4 to 20 seconds. Recommendation: Classical music listeners may want to specify a longer blank, so that the unit doesnt mistake soft passages for blank spots.

DSC menu (Direct Software Control)
Blank Skip (BSKP ON / BSKP OFF) Press or to turn Blank Skip on or off. Scan times You can set different scan times for radio (RD SCNTM), cassette (TP SCNTM), and changer (CD SCNTM) between 1 and 16 seconds. Press or to adjust the scan time. Confirmation beep on/off (BTTNBEEP) To activate or defeat the beep for all button presses, press more than 1/2 second always have a confirmation beep. or. Button presses requiring
Adjustable mute level (MUTE LVL) The units mute level can be adjusted to any volume level. This mute level also applies to cellular mute. Once MUTE LVL appears, the actual mute level is heard. Adjust the mute level or. Do not use the + or button to set the mute level. volume by pressing Note: If mute is activated when the unit volume level is lower than the mute level, the units volume level is maintained, even though MUTE appears. Maximum turn-on volume level (MAXONVOL) This function allows you to set the maximum volume that is heard when unit is turned on. Once MAXONVOL appears, the actual turn-on volume level is heard. Adjust the turn-on volume by using /. Do not use the + or button. Note: If the unit is turned off while the volume is louder than the adjusted turn-on volume, the turn-on volume will be at the level it was when the unit was turned off. Loudness levels You can choose between two loudness settings for each audio source: LOUD AUX (for external unit), LOUD CD, (for CD changer), LOUDTAPE (for cassette),LOUD AM and LOUD FM (for radio). To set the loudness level for each source, use and. Radio station naming (STN NAME) This function is available only while the radio is the active source. You can enter a name of 8 characters for each radio station. Up to 30 stations can be named. If you try to enter more than 30 names, **FULL** appears. You can then enter new names after erasing some of the existing names. To store station names: 1. Press MENU for more than 2 seconds to access the DSC menu mode. 2. Scroll to the radio station naming feature by pressing /. 3. Access the radio station naming mode by pressing or. 4. Tune to the desired station by pressing AM or FM, a preset button or /. If the station was previously named, the name appears in the display. 5. Press or to access the station name edit mode. 6. Press / to select characters. Select _ for a blank space. 7. Press to select the next character position. 8. Press AUDIO to store the name. STORING blinks twice in the display before the unit returns to the station access mode. 9. To name another station, repeat the steps 4-8. 10. Press MENU to exit from the DSC menu. Erasing one radio station name Enter the station access mode in the DSC menu (see Radio station naming, above). Choose the station with the name to be deleted. Once the name appears in the display, press AUDIO for 2 seconds. A beep sounds. Now release the button to delete this name. NAME and DELETED blink alternately. Press MENU to exit from the DSC menu.

Erasing all radio station names Enter the station access mode in the DSC menu (see Radio station naming, above). When a name appears, press AUDIO for 8 seconds. ALLNAMES appears for 2 seconds, then DELETED until the deletion is completed. Press MENU to exit from the DSC menu. Disc naming (DISCNAME) Assigning a name to a disc makes it much easier to locate the disc later on. You can enter and store names of up to 99 discs (one name per disc, maximum of 7 characters per name). If you try to enter more than 99 names, **FULL** will appear. You can then enter new names after erasing some of the existing names. To name a disc: 1. Press MENU for more than 2 seconds to access the DSC menu mode. 2. Scroll to the disc naming function by pressing /. or. 3. Enter into the disc access mode by pressing 4. Select the desired disc using the / buttons. If previously named, the name appears. 5. Press or to access the name edit mode. 6. Press / to select characters. Select _ for a blank space. 7. Press to select the next character position. 8. Press AUDIO to store the name. STORING blinks twice in the display. The unit returns to the disc access mode. 9. To name another disc, repeat the steps 4-8. 10. Press MENU to exit from the DSC menu mode. Erasing one disc name Enter the disc access mode in the DSC menu (see Disc naming). Choose the disc that has the name to be deleted. When the name appears, press AUDIO for 2 seconds. A beep sounds. Now release the button to delete the name. NAME and DELETED alternately blink. Press MENU to exit from the DSC menu. Erasing all disc names Warning: This feature erases all names of all discs, including for discs not presently inserted in the magazine. Enter the disc access mode in the DSC menu (see Disc naming). When a name appears, press AUDIO for 8 seconds. ALLNAMES appears for 2 seconds, then DELETED until the deletion is completed. Press MENU to exit from the DSC menu.
Infrared eye for wireless remote control
The Blaupunkt RC 06 H wireless remote control has the following buttons and can activate all of the same features as the corresponding buttons on the radio thanks to the integrated infrared eye: SRC, SCA, V, V+, , , and. Part number: (manual remote control without interface). See your Blaupunkt dealer for details.

Auxiliary input jack

(cable connection with 3.5 mm pigtail coupler)
Connect other audio equipment, such as a portable tape or DAT player, through a 3.5 mm pigtail connector. Press SRC until AUX IN appears. Adjust volume, bass, and treble settings through the head unit.
Audio power specifications
Output power: 23 watts per channel minimum continuous average output into 4 ohms, 4 channels driven, from 35-16000 Hz.

Other specifications

Tuner FM Tuning range: FM mono sensitivity: Signal-to-noise ratio: Frequency response: MW (AM) Tuning range: Signal-to-noise ratio: Frequency response: Cassette mechanism Signal-to-noise ratio: Tape wow and flutter: Tape frequency response: Audio Speaker impedance: Maximum amp power: RMS power: Preamp outputs: Preamp output voltage: Auxiliary input: General Dimensions (w/o projecting parts): Mass: Power requirement (neg. grnd.): Operating temperature: Supplied accessories:
531 - 1602 kHz 50 dB 30-5000 Hz

56 dB 0.2 % 30-18000 Hz

4-8 ohms 4 x 35 watts (at 4 ohms) 4 x 23 watts (at 4 ohms) acc. to DIN at 14.4 volts 4-channel 2.0 volts preamp output 4-channel, low-impendance (150 ohms) preamplifier 2.0 volts
179 x 50 x 150 mm Approx. 1.4 kg 12 V DC car battery (11-16 V DC allowable) -20C to 60C Unit Faceplate (release panel) with hard-shell case Wire harness DIN sleeve Mounting hardware Operating instructions Car radio passport Labels
Design and specifications subject to change without notice.
87.5 - 108 MHz 1.0 V 65 dB (stereo), 70 dB (mono) 35-16000 Hz

Specifications

Blaupunkt-Werke GmbH

Bosch Gruppe

07/97 K7/VKD 400 902