PU-2975A (R.ROVER) PRC7119 PE-9092 PE-9093 PE-9094 PE-9096 VAR 9149 PN-9203A (BMW) PU-9206A (SAAB) PN-9270 (NISSAN CK 968) PN-9273 (NISSAN CK 888) PN-9275A PU-9252A PU-9312 PU-9317 PU-9318 PU-9357A PU 9358 (CITROEN) PU-9359 PU 9386 PN-9410 (CT039) PE-9412, 9413 PU-9427 (CITROEN) PU-9427A (SAAB) PU-9469A PU-9479A (CHRYSLER) PP-9484A (NISSAN) PU-9492A PN-9524U, PN-9525U (BMW) PN-9534 (PEUGEOT) PU-9535 PU-9536A PU-9537 PU-9540B, 9542, 9545 (CHRYSLER) PU-9548 PU-9549A (CHRYSLER) PU-9571A PU-9587B (SAAB)
CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION CLARION DAEWOO DAEWOO DAEWOO DAEWOO DAEWOO DAEWOO DAEWOO PU 9593A (PEUGEOT) PU 9594A PU 9595R PU-9636, 9637A (CITROEN) PU-9639 PU-9645 PU-9654B (R. ROVER) PU-9664A PU-9666A (CITROEN) PU-9667A (CITROEN) PU-9679 RDS (PEUGEOT) PU-9715A (SAAB) PU-9716 (SAAB) PU-9717 (SAAB) PU-9726 (NISSAN CK 953) PU-9833A (RENAULT) PE-9838A (VW) PE-9839 Mexico (VW) PO-9840A (VW) PU-9843A PU-9845A (L.ROVER) PU-9872A (NISSAN) PU-9879A PU-9880A PU-9903A, 9904 (SAAB) PU-9907 (ALFA ROMEO) PU-9726 (NISSAN CK 953) PU-9908 (NISSAN CK 954) PU-9933N (PEUGEOT) PU-9938N (NISSAN) PU-9940 PU-9970 PU-9982A (PEUGEOT) PU-9984 LANCIA 5073 AKF 4306 EG AKF 9445R AKF 9625 AKF 9625 TANK AKF 9637 AKF 8817
EEPROG EEPROG JUMP JUMP EEPROG EEPROG JUMP JUMP JUMP JUMP EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG JUMP JUMP JUMP JUMP JUMP EEPROG EEPROG EEPROG EEPROG EEPROG JUMP EEPROG JUMP JUMP JUMP JUMP ? EEPROG JUMP JUMP JUMP JUMP

DELCO DELCO DELCO

GEO CDR 500 USA CARS

? TMS TMS

RPC 6001

EEPROG

ELTRA RPC 6007

FIAT FIAT

PHILIPS DC449 PHF011W MAREA GRUNDIG FA0925
FISHER FISHER FISHER FISHER FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD FORD
AX 835 AX 845 AX 1845 AX ( only radio) 2002 ( only radio) 2014 INTERCONTI 14740 2003R (>1996) Detachable panel 2004 (>1996) 2005 (>1996) 2015 RDS 2006 RDS 2006 RDS TI 2007 RDS TI 2028 (SONY) 2040 (SONY) TRAFFIC RDS EP 12 DS (SOUND2000) E-SRT 22 DPS 770 INTERCONTI ESRT22DPS ESRT32DPS VW SOUND 1 VW SOUND 2
EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG EEPROG 77007 EEPROG EEPROG EEPROG EEPROG TMS TMS JUMP EEPROG XPROG XPROG ? XPROG SERVICE SERVICE ? ? ? ? TMS TMS

FUJITSU FUJITSU FUJITSU

TOYOTA 7200 (38401) MAZDA TEN CD320RCE (TOYOTA)

EEPROG EEPROG EEPROG

GAMMA GAMMA GAMMA GAMMA GAMMA GAMMA GAMMA GAMMA GAMMA GAMMA GAMMA II, IIA (BLAUPUNKT) III (BLAUPUNKT) CC BLAUPUNKT CC BOSE BLAUPUNKT IV PANASONIC IV PHILIPS PHILIPS-3 CC GRUNDIG GAMMA 2 (GRUNDIG) GAMMA 3 (GRUNDIG) GAMMA 3a (GRUNDIG)

Positive cable (ACC 12 V) (ignition)
Connect the positive cable together with distributor to pin 30 (constant power) or pin 15 (positive line connected via ignition) of the fuse holder behind the fuse. Permanent plus connection (Battery 12 V)

per. +12V

Connect the permanent plus terminal together with the cable and cable clamp to a fuse-protected positive line (e.g. clock, warning flasher). Control cable (Power Antenna +)
Connect the antennas control cable to the control cable of the car stereo when installing a fully automatic motor antenna or electronic window antenna. The switching line must not be used as the switching voltage for an amplifier, since the control cable can be live even if the set is off with the TIM function being activated. The amplifier would then be activated. The control cable is fuse-protected. Amplifier

Preamp.

The preamp jack is not occupied. Amplifier connection via loudspeaker outputs only. To set up the amplifiers switching voltage, attach the enclosed cable to chamber 1 of the power supply connection block. Car radio installation Insert the car radio from the front into the support and push in until the stop springs on the sides engage right and left (distinct click to be heard). Removal of the car radio Insert the brackets right and left into the provided trimplate holes and push in until you hear a distinct click (lateral springs are unlocked). Using both brackets (see fig. 5), pull the unit out. Note: Locked brackets can only be removed after taking out the unit.
Preparation of car radio installation
Install the car radio into the DIN cut-out provided in your cars dashboard ex factory. Prepare the car radio DIN cut-out (unlock shelf or dummy cover) or cut out the car radio compartment to 182 x 53 mm. Grasp behind the car radio cut-out and check how many of the fixing strips of the car radio support may be bent. Note: Try to bend as many fixing strips as possible. Insert the support into the cut-out and bend the appropriate fixing strips with a screwdriver, see fig. 1, 2.