Radio / Cassette / Changer
Coburg RCM 127 Casablanca RCM 127 Cannes RCM 127 Woodstock DJ I Woodstock DJ A

Operating instructions

Coburg.RCM127 d

13.02.2001, 10:15 Uhr

Coburg Woodstock RCM 127 DJ I
Casablanca Cannes Woodstock

RCM 127 RCM 127 DJ A

Fernbedienung RC 06 (Option) Remote control RC 06 (optional) Tlcommande RC 06 (en option) Telecomando RC 06 (optional) Afstandsbediening RC 06 (Optie) Fjrrkontroll RC 06 (Tillval) Mando a distancia RC 06 (opcional) Telecomando RC 06 (opo)
Coburg.RCM127 d 2 13.02.2001, 10:15 Uhr
Quick reference.. 28 Important notes.. 33
Precautions.. 33 Traffic safety... 33 Installation.. 33 Sound source mute.. 33 Accessories.. 33
KeyCard theft protection system 34
Putting the unit into operation. 34 Removing the KeyCard. 34 Training a second KeyCard/ Replacing a KeyCard.. 34 Displaying the radio pass data. 34 Short Additional Memory (S.A.M.). 35 Turn On Message (T.O.M.). 35 Optical indication of anti-theft protection... 35 Care of your KeyCard.. 35

DSC programming.. 47

Overview of DSC factory settings. 49
Radio operation with RDS. 36
AF - Alternative frequency.. 36 REG - regional programme. 36 Selecting a waveband (only Casablanca RCM 127, Cannes RCM 127, Woodstock DJ A). 36 Station tuning.. 37 Automatic tuning /.. 37 Manual tuning with << >>. 37
Coburg.RCM127 gb 27 13.02.2001, 10:19 Uhr

PORTUGUS

Traffic announcement priority on/off. 42 Beep tone.. 42 Switching off the beep tone.. 42 Automatic seek tuning start. 42
Specifications.. 49 Blaupunkt telephone hotline.. 49

ESPAOL

Receiving traffic programme stations with RDS-EON. 42

Appendix.. 49

SVENSKA
Switching the audio source. 35
Scrolling through the broadcasting networks.. 37 Changing the memory bank.. 37 Storing stations.. 37 Automatically storing the strongest stations with Travelstore.. 38 Recalling stored stations.. 38 Scanning stored stations with Preset Scan.. 38 Scanning stations with Radio-Scan. 38 Selecting the seek tuning sensitivity. 39 Switching from stereo to mono. 39 Loudness... 39 PTY Programme-Type.. 39 Switching PTY on/off.. 39 Programme type.. 39 Checking the programme type of the station.. 40 Displaying the selected programme type.. 40 Selecting a programme type. 40 Storing programme types. 41 Scanning stations with PTY-SCAN. 41 PTY priority.. 41
Adjusting the volume for traffic announcements and the beep tone. 43

CD changer operation. 45

Switching to the CD changer mode. 45 Selecting CDs and titles.. 45 MIX playback.. 45 Selecting the display mode. 46 SCAN.. 46

NEDERLANDS

ITALIANO
Inserting a tape.. 43 Removing a tape.. 43 Fast Forward/Rewind.. 43 Selecting titles with CPS.. 43 Switching the tape side (autoreverse). 44 Tape equalisation.. 44 Scanning cassette titles with SCAN.. 44 Listening to the radio during fast tape winding with RM.. 44 Care notes.. 44

FRANAIS

ENGLISH

Tape operation.. 43

DEUTSCH

Contents

Quick reference
1 Switching on/off with the ON button: Press ON. When switching the set on with the ON button, the KeyCard has to be inserted. The unit will play with the pre-adjusted volume. Switching on/off via the ignition: When connected correspondingly, the set can also be turned on and off with the vehicle ignition. After the ignition has been switched off, a double beep tone will remind you that you should remove the KeyCard before leaving your vehicle. Switching on with the ignition being switched off: To keep on operating the set when the ignition is switched off (KeyCard is inserted), proceed as follows: Press ON. The unit will be turned on. To avoid that the battery goes flat, the system will be turned off automatically after one hour of playback. 2 VOL+ / VOLTo alter the volume. Each time the set is switched on, it will play with the pre-adjusted volume (VOL FIX). You may also change the VOL FIX setting (see chapter DSC programming). 3 For instantly muting the volume. button the volume By pressing the can be muted immediately. MUTE will appear in the display. The function is cancelled by pressing button or VOL+. (mute) When pressing VOL-, the volume will be adopted. To programme the mute volume level, proceed as follows: Adjust the desired volume. for 1 second until you Press hear a beep. Now this volume level is stored as your mute volume.
Switching on/off with the KeyCard: The set has to be turned on with the ON button. Note: Read the information in chapter KeyCard theft protection system.
Coburg.RCM127 gb 28 13.02.2001, 10:19 Uhr

4 Rocker switch

Changer operation Optional: Coburg RCM 127, Casablanca RCM 127, Cannes RCM 127 Included in scope of delivery: Woodstock DJ I, Woodstock DJ A

CD selection Up

5 Display

a d efg h i j k l

Radio operation

/ Station search Up Down

Down Title selection Upwards: Press briefly. CUE - fast advance (audible): Keep depressed. Downwards: Press as many times as required. To re-start a title: Press briefly. REVIEW - fast reverse (audible): Keep depressed.

Tape operation

/ Title selection (S-CPS) Up Down Fast forward Fast rewind Stop function by pressing the opposite key.
Extra rocker switch functions: Further setting functions with AUD B DSC Mode A PTY @ Condition: The corresponding function is activated.
Coburg.RCM127 gb 29 13.02.2001, 10:19 Uhr

On FM only: <</>> To scroll through the station networks when AF is on, e.g.NDR 1, 2, 3, 4, N-JOY, FFN, ANTENNE.
<</>> Up/Down in short intervals (on FM only if AF is off)
a) NDR1 NDS - Station name b) TR 1 - Track (side) 1 of the cassette c) 1 : 52 - Playback TIME or disc NUMBER during CD changer operation d) FM - Waveband e) 5 - Preset button (1-6) f) I, II, T - Memory bank I, II or Travelstore g) lo - Seek tuning sensitivity h) AF - Alternative frequency for RDS operation i) TP - A traffic station is being received j) TA - Priority for traffic stations k) LD - Loudness l) PTY - Programme type function
6 KeyCard theft protection system To operate the set it is necessary that the KeyCard is inserted.

KeyCard

Inserting the KeyCard With the KeyCard tongue sticking out of the unit, introduce the KeyCard into the slot with the contact area showing up. To remove the card, press first to unlock. Read also the information in chapter KeyCard theft protection system. Flashing KeyCard tongue When the radio is turned off and the KeyCard removed, the KeyCard tongue can be programmed to flash for optical theft protection. For more information see chapter DSC programming. This flashlight can be switched off by pushing in the tongue and lock. WRONG KC will briefly appear on the display and the set will switch off automatically.
7 FMT (Coburg RCM 127, Woodstock DJ I) BND (Casablanca RCM 127, Cannes RCM 127, Woodstock DJ A) For selection of the FM memory banks I, II and T (Travelstore). To switch over: Press button repeatedly. The selected memory bank will appear in the display. Travelstore To store and recall the six most powerful stations with Travelstore. To store: Press button for approximately 1 sec. until you hear a beep and T-STORE appears in the display. To recall: Select the memory bank T and press the corresponding preset button (1-6) briefly.
8 AF Alternative frequency during RDS operation: When AF lights up in the display, the system will automatically seek a frequency offering better reception of the same RDS programme. AF on/off: Press AF briefly. Regional function on/off: Press the AF button for approximately 1 sec. until you hear a beep. REGON or REG-OFF will appear in the display (see chapter REG - regional programme). 9 TA (priority for traffic announcements) When TA lights up in the display, the system will play traffic stations only. Priority on/off: Press TA. : 1, 2, 3, 4, 5, 6 - preset buttons You can store six stations for each of the memory banks I, II and T. To store a station: Press a preset button during radio operation and hold down until the set resumes play after the muting and you hear a beep. To recall a station: Select the desired memory bank and press the relevant preset button briefly.
Casablanca RCM 127, Cannes RCM 127, Woodstock DJ A: Additional selection of medium- and long-wave stations, provided that AM ON has been adjusted in the DSC menu.

Coburg.RCM127 gb 30 13.02.2001, 10:19 Uhr
Extra function of preset buttons To store and recall a PTY programme type. When PTY is active (PTY lights up in the display), you can store and recall one programme type on/from each preset button on FM. ; SRC (Source) You can switch between the radio, tape and CD changer operating modes, provided that a cassette/CD is inserted. < lo To switch the seek tuning sensitivity level: Press button briefly. If lo is displayed, the radio will only pick up strong, local stations (normal sensitivity). If lo does not light up, the radio will also pick up weaker, distant stations (high sensitivity). =
Extra function of lo button: To switch between mono and stereo reception: Press button for approximately 1 sec. (beep). The selected condition will be briefly displayed. / To switch the tape side: Press briefly. To eject the tape: Press for approximately 1 sec. Extra function / Frequency display during radio operation: Press button briefly. The frequency will be briefly displayed. > Cassette loading slot Insert the tape with side A or 1 facing up, the open side showing to the right.
? SC Radio operation Scan Press SC briefly. The scanned frequency or the station name will start flashing in the display. During the actual scanning process FM-SCAN or AM-SCAN will be displayed. The unit will scan all FM stations which can be received. Preset Scan Press SC for approximately 1 sec. until you hear a beep. SCAN and the name or frequency of the scanned station will alternately appear in the display. The unit will scan all stations stored on the preset buttons. To stop Scan / Preset Scan: Press SC once again.
Coburg.RCM127 gb 31 13.02.2001, 10:19 Uhr
Tape operation Cassetten-Scan Press SC. CC-SCAN will appear in the display. All cassette titles will be scanned briefly. To stop cassette scan: Press SC once again. Changer operation CD-Scan Press SC briefly. CDC-SCAN will appear in the display. All CD titles will be scanned briefly. To stop CD-Scan: Press SC once again. @ PTY (Programme Type) In the PTY mode, the preset buttons become programme type buttons. With every preset you can select one programme type, such as for example NEWS, SPORT, POP MUSIC, EDUCATE, etc.
A DSC (Direct Software Control) Use the DSC function to customise certain programmable, basic settings to suit your personal needs and preferences. See chapter DSC programming for more information. B AUD To adjust the treble, bass, balance and fader. If the display shows TRE or BAS, you can adjust the reproduction of the treble and bass frequencies with the rocker switch. If BAL or FAD is displayed, you can set the balance (left/ right) and fader (front/rear). Press AUD as many times as required and make the setting using the rocker switch.

Using the second KeyCard to be purchased at any specialised dealership, you can program the unit to display a selected Turn On Message after the set is switched on. Any specialised dealer with the proper equipment can program the desired text with up to a maximum of 48 characters onto the KeyCard. Each time you switch on your car radio using the second KeyCard, this text will appear in the display.

Care of your KeyCard

Turn On Message (T.O.M.)
Switching the audio source
Radio operation with RDS (Radio Data System)
The Radio Data System offers you more convenience when listening to FM radio stations. More and more radio stations have begun to broadcast RDS information alongside their programmes. As soon as a programme has been identified, the station name including a regional identifier, if applicable, will appear in the display, for example, NDR1 NDS (regional programme in Lower Saxony, Germany). When RDS is activated, the preset buttons become programme buttons. You now know exactly which programme you have tuned into, making it easy to find the desired station quickly. But RDS offers you further advantages: switching on the radio or recalling one of the stored frequencies, the unit is automatically searching for an alternative frequency. SEARCH will disappear from the display when the alternative frequency has been found or after the frequency band has been run through completely. If the reception quality of the selected programme becomes too bad: Tune into another station. If you leave the service area of the regional programme tuned into, or if you would like to take advantage of the full RDS service, switch to REG OFF. Press the AF button for approximately 1 sec. until REG OFF appears. If the REG function is active, REG ON will be briefly displayed each time the radio is switched on.
Selecting a waveband REG - regional programme
Certain radio programmes are split up at times into regional programmes offering local information. The 1st programme broadcast by NDR, for example, offers programmes with different contents in the northern states of Germany Schleswig-Holstein, Hamburg and Lower Saxony at certain times of the day. If you are listening to one regional programme and move to an area where another linked regional programme becomes stronger, the unit will switch to that programme. If you wish to continue listening to the first programme, press the AF button for approximately 1 sec. REG ON appears in the display.

(only Casablanca RCM 127, Cannes RCM 127, Woodstock DJ A)
You can select between the following wavebands: FM 87.5 - 108 MHz MW 531 - 1602 kHz LW 153 - 279 kHz Press the BND button until the desired waveband shows on the display panel. Note: In the DSC menu you can deactivate the station selection on either MW or LW or for both wavebands at the same time. This has the advantage that only the required bands will allow to be activated, so that you must press the BND button less often. For more information, please refer to chapter DSC programming - AM ON/OFF.
AF - Alternative frequency
The AF (Alternative Frequency) function makes sure that the strongest frequency of the currently selected programme is always tuned in automatically. This function is activated when AF appears in the display. In order to switch this function on or off, press the AF button briefly. While searching for the strongest reception signal, the radio may switch to mute briefly. If SEARCH appears in the display when 36

Coburg.RCM127 gb 36

Station tuning
Automatic tuning / Press / ; the car radio will automatically search for the next station. When keeping the upper or lower part / of the rocker switch depressed, seek tuning will speed up in upwards or downwards direction.
Manual tuning: Press << >>; the frequency will change in short intervals in downwards or upwards direction. When holding the right or left part of the rocker switch depressed, the frequency scan is speeded up.

Changing the memory bank

You can shift between the memory banks I, II and T in order to store stations and recall them later. The currently selected memory bank is indicated in the display. Press the FMT or BND button as many times until the desired memory bank lights up in the display.
Scrolling through the broadcasting networks
You can use the << >> buttons to tune in stations of your reception area. If several programmes of the broadcasting networks can be received, you can scroll through them in forwards direction pressing >>, or backwards using the << button, e.g. NDR 1, 2, 3, 4, N-JOY, FFN, ANTENNE. For this it is necessary that the stations have been tuned in at least once and that AF is active (lights up in the display). For this purpose, you may start Travelstore seek operation: Press FMT or BND for 1 sec.; the system starts to run through the frequency band. The display shows T-STORE. If AF does not light up, press AF. This fulfils the requirements for selecting stations with << >>.

Coburg.RCM127 gb 38 13.02.2001, 10:19 Uhr
Selecting the seek tuning sensitivity
You can alter the automatic seek tuning sensitivity. If lo is displayed, the radio will only pick up strong, local stations. If lo does not light up, the radio will also pick up weaker, distant stations. To switch the seek tuning sensitivity: Press lo briefly. The sensitivity level can be altered separately in both modes. Please refer to chapter DSC programming - S-LO, S-DX).

Loudness

Adjusts the low bass frequencies for a more natural sound. Switching Loudness on/off: Press the AUD button for approximately 1 sec. When the Loudness function is active, LD will light up in the display. See chapter DSC programming for more information.

Programme type

Use << >> to have the last selected programme type displayed and to choose a new one. You can select any one of the stored types with the preset buttons 1-6. Condition: PTY must be active. Using DSC you can choose between German and English (see DSC programming PTY LANG). All of the programme types listed below are available. The letters printed in bold are identical to the actual short-time indication in the display. NEWS CURRENT AFFAIRS INFORMATION SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP MUSIC ROCK MUSIC M.O.R. M (middle of the road music) LIGHT M (light classical) CLASSICS (serious classical)

PTY Programme-Type

PTY is an RDS service offered by more and more radio broadcasters. This feature allows you to select FM stations according to their programme type. After you have chosen the PTY of your preference, the corresponding stations can be selected either by seek tuning or using the scan function. Switching PTY on/off Press PTY. When the function is active, the programme type selected last will briefly appear in the display. PTY will be permanently indicated in the lower right corner of the display panel.
Coburg.RCM127 gb 39 13.02.2001, 10:19 Uhr
Every time the radio is switched on, stereo playback is activated automatically. The unit will gradually switch to mono if reception is poor. You can also switch between mono and stereo reception manually: Press the lo button for approximately 1 sec. The selected condition will briefly appear in the display.

Switching from stereo to mono
OTHER M (other music) WEATHER FINANCE CHILDRENS PROGRAMMES SOCIAL AFFAIRS RELIGION PHONE IN TRAVEL HOBBIES JAZZ MUSIC COUNTRY MUSIC NATIONAL MUSIC OLDIES MUSIC FOLK MUSIC DOCUMENTARY ALARM TEST Checking the programme type of the station Press PTY for approximately 1 sec. After the beep tone the display will show the programme type offered by the tuned in station. If NONE appears in the display, the current station has no PTY code.
Displaying the selected programme type Press << or >>. The programme type selected last will be displayed briefly. Selecting a programme type a) Using the preset buttons When PTY is switched on, you can use the preset buttons 1-6 to select the programme types stored at the factory. Press one of the presets 1-6. The selected programme type will be displayed for 2 seconds. If you wish to listen to a station with this PTY, press / to start seek tuning. If the system is unable to find a station offering the selected programme type, the display will show NO PTY and a beep tone will be released. The station received before starting seek tuning will be tuned in. You can assign different programme types to each preset position. Please refer to chapter Storing programme types.
b) Using the << >> buttons of the rocker switch When PTY is switched on, you can select a programme type using buttons << >>. Press << or >>; the programme type selected last will be displayed for 3 seconds. During this period press >> (forwards) or << (backwards) to select the desired type. Press << or >> as many times as required.
If you wish to listen to a station offering the selected PTY, press / to start seek tuning. If the system is unable to find a station offering the selected programme type, the display will show NO PTY and a beep tone will be released. The station received before starting seek tuning will be tuned in.
Coburg.RCM127 gb 40 13.02.2001, 10:19 Uhr
Storing programme types At the factory, one programme type was assigned to each of the preset buttons 1-6. If desired, you can also store other available programme types. To do so, make sure that PTY lights up in the display. If necessary, press the PTY button to switch on the function. Select a programme type using buttons << >> and
PTY priority Situation: PTY is switched on and lights up in the display. No station offering the selected programme type can be currently received (neither with seek tuning nor with scan). The set will switch back to the previous station. As soon as a programme with such PTY can be received within the broadcasting network, the unit will switch over to the corresponding station for the duration of the programme. Example: German broadcasting network NDR: Station tuned in: NDR3. PTY lights up in the display. Programme type POP selected. Seek tuning is started. No station with PTY-POP can be found. The display shows NO PTY and automatically switches back to NDR3. NDR2 airs a PTY-POP programme. The system will switch to the linked NDR2 station for the duration of the POP programme. 41 During tape operation, the set will also automatically switch to the programme offering the selected PTY within the broadcasting network. After the PTY programme the system will remain in the radio mode. Notice: As mentioned earlier, these functions are currently only supported by a limited number of RDS stations.

Scanning cassette titles with SCAN
You can have the cassette titles played briefly by using the scan function. If you like a title, stop the scan to continue listening to that track. To start/stop the scan function: Press the SC button briefly. Scan condition: There has to be an unrecorded tape portion of at least 3 seconds between the individual titles.

Care notes

To avoid possible problems, we recommend you to use C-60/C-90 type cassette tapes only. Store your tapes in a cool place away from dirt, dust and temperatures exceeding 50 Celsius. Allow very cold tapes to warm up before playing them in order to avoid uneven tape transport. After approximately 100 hours of use, dust particles collected on the playback head or roller may lead to tape run problems and sound distortions. Use a head cleaning tape to remove normal dirt build-up. For tougher cases, use a cotton swab (Q-Tip) dipped in alcohol. Do not attempt to clean by inserting a hard object into the player!
Listening to the radio during fast tape winding with RM (Radio Monitor)
When the tape is fast forwarded or rewound (also with CPS), the radio will normally be muted. In order to listen to the radio during fast winding, you can activate the Radio Monitor function. For more information please refer to chapter DSC programming - RM ON/OFF.

Tape equalisation

When a metal or CrO2 tape is inserted, the tape mechanism automatically adjusts to metal/CrO2 tape equalisation.
Coburg.RCM127 gb 44 13.02.2001, 10:19 Uhr
Optional: Coburg RCM 127, Casablanca RCM 127, Cannes RCM 127 Included in scope of delivery: Woodstock DJ I, Woodstock DJ A This piece of equipment offers you convenient control of a Blaupunkt CD changer CDCA 05/F 05 (with adapter 889 093) / CDC-A 06. Note: Use only perfectly circular CDs. CDs manufactured in the shape of a butterfly or a beer mug, for example, are not suitable for use with this equipment. Using such CDs can very likely result in the destruction of the CD and the CD drive. We assume no responsibility for damages caused by using unsuitable CDs.

Selecting CDs and titles

MIX playback
You can have the CD tracks played in random order. Select the desired MIX mode in the DSC menu. MIX CDC The MIX mode is active: The individual discs and the titles of the selected CD are chosen randomly. After all titles have been played, the next CD will be selected at random again. Use to select a CD title in random order. MIX OFF The Mix function is deactivated. Discs and titles will be selected in numeric order. To change the MIX mode: Press DSC. Select MIX using the rocker switch / and adjust with /. If the function is active, CDC MIX will be displayed every time CD changer operation is activated.

CD selection Up Down Title selection Upwards: Press briefly. CUE - fast advance (audible): Keep depressed. Downwards: Press as many times as required. To re-start a title: Press briefly. REVIEW - fast reverse (audible): Keep depressed.
Switching to the CD changer mode
Make sure that at least one CD has been inserted into the magazine. Press SRC to toggle the audio source: Press repeatedly until the CD functions appear in the display.
Coburg.RCM127 gb 45 13.02.2001, 10:19 Uhr

CD changer operation

Selecting the display mode
You can select the desired display mode for CD playback: CDC NUMBER The CD number, such as CD 8 is displayed. TIME The elapsed playback time of the current title is displayed, for example 2 : 32.
Use this function to scan all of the CD tracks. To start the Scan function: Press SC. The titles will be scanned one after the other in ascending order. To stop the Scan function: Press SC briefly. The track currently being scanned is continued to be played. SCAN will also be terminated by pressing one of the buttons AUD, GEO, DSC, SRC, << >> or /.
To switch the display mode: Press DSC. Use the rocker switch / to select CDC DISP. Use / to adjust to NUMBER or TIME. You can also change the display mode immediately for the title currently playing by. pressing
Coburg.RCM127 gb 46 13.02.2001, 10:19 Uhr

TA VOL

selectable:
/ << >> Select function Adjust/recall value
Coburg.RCM127 gb 47 13.02.2001, 10:19 Uhr
AM ON MW OFF LW OFF AM OFF
all bands LW, FM MW, FM FM
To adjust the traffic announcement and beep tone volume from between 0 to 63. The message will then come through at this volume, if the standard volume is lower. If the standard volume is higher than the TA VOL level, the traffic report will be played slightly louder than the standard volume.
press DSC. Use the rocker switch to select and adjust the functions described in the following. The display will show you the adjusted condition.
AM ON / OFF (Casablanca RCM 127, Cannes RCM 127, Woodstock DJ A) You can deactivate one or both AM bands (MW/LW) in order to reduce the number of bands for selection with BND.

DSC (Direct Software Control) allows you to customise certain programmable, basic settings to suit your personal needs and preferences and then store them. The basic settings for this audio equipment were made at the factory. In the following you can find an overview of these settings, so that you can always reset to these if desired. If you wish to alter any of the programming, press SRC to choose the desired operating mode (e.g. radio, if you wish to change the language with PTY LANG).
For changer operation only. MIX CDC CD selection at random. All titles of this disc will be chosen in random order as well. The next disc is again selected at random. MIX OFF The MIX function is switched off.
LOUDNESS When listening at a low level, the Loudness function creates a more natural sound by boosting the low frequency range. LOUD 1 - Low boost LOUD 6 - Max. boost
RM ON / OFF (Radio Monitor) Allows you to listen to the radio during fast winding of the tape. RM ON Radio playback activated RM OFF Function deactivated

DSC programming

Acknowledgement tone for all functions which require a button to be pressed for more than 1 second. The volume can be adjusted from between 0 to 9. (0 = off)

READ KC

LED ON/OFF You can choose between LED ON or LED OFF. With LED ON, the KeyCard tongue will flash for extra anti-theft protection when the unit has been switched off and the KeyCard removed. LEARN KC To train a second KeyCard. Please read the information in chapter KeyCard theft protection system - Training a second KeyCard.
To read out the KeyCard data. The KeyCard supplied with the radio is used to display the model name, type number (7 6.) and the serial number. Using the second KeyCard to be purchased at any specialised dealership it is possible to display the Short Additional Memory (S.A.M.) data entered by the dealer. See chapter Short Additional Memory S.A.M. If you remove the KeyCard during the reading process, READ KC will show on the display panel. To select the programme type language: DEUTSCH or ENGLISH To adjust the seek tuning sensitivity for distant reception. DX 1 - high sensitivity DX 3 - low sensitivity
To adjust the seek tuning sensitivity for local reception. LO 1 - high sensitivity LO 3 - low sensitivity The seek tuning sensitivity values can be set separately for AM and FM.
AUX ON/OFF Please note that this item will not appear if you have connected a CD changer. Default setting: AUX OFF. Adjust to AUX ON if you have connected an external piece of equipment to the AUX socket. VOL FIX Use this function to select the volume at which the radio is set when it is switched on. Adjust the desired volume level with << >>. When adjusted to VOL 0, the system will come on with the volume selected before switching it off.

PTY LANG

Coburg.RCM127 gb 48 13.02.2001, 10:19 Uhr
To quit the DSC programming mode and store the adjustment: Press DSC. The DSC programming mode will be automatically quit 8 seconds after having made the last adjustment.

Specifications

Amplifier Output power: 4 x 23 W RMS power acc. to DIN 45324 at 14.4 V 4 x 35 W max. power
Overview of DSC factory settings
MIX RM LOUDNESS TA VOL BEEP LED LEARN KC READ KC PTY LANG S - DX S - LO VOL FIX OFF OFF 4 ON ENGLISH 0

87.MHz

(Casablanca RCM 127, Cannes RCM 127, Woodstock DJ A) MW kHz LW kHz
FM sensitivity: 0.9 V at 26 dB signalto-noise ratio
Subject to modifications! 49
Coburg.RCM127 gb 49 13.02.2001, 10:19 Uhr
CD changer Frequency response: 5 - Hz
(Casablanca RCM 127, Cannes RCM 127, Woodstock DJ A): AM ON
Tape player Frequency response: 30 - Hz
FM frequency response: 30 - Hz
Using the area code to be entered you will be automatically given the address and phone number of the next Blaupunkt service centre. You can also request this information by fax.
Then call the following chargeable phone number: / 56 66.
If you would like to know the address of the next Blaupunkt service centre of your area without having our service list at hand: - Find out your area code.

Tuner Wavebands: FM :

Address of the next service centre in your vicinity (only for Germany)
Blaupunkt telephone hotline

Appendix

A , DSC (Direct Software Control), . E . << >> / , MIX M Changer . MIX CDC E A , CDs . E CD SRC (. . , MIX OFF TY LANG). MI . . M << >> AM ON/OFF (Casablanca RCM 127, . Cannes RCM 127, Wood stock DJA).
AM ON MW OFF LW (), UKW (FM) LW OFF MW (), UKW (FM) AM OFF UKW (FM)

RM ON/OFF

M ( adio onitor) . RM ON - A . RM OFF - .

AM ( ). BND AM .

. LOUD 1 - M LOUD 6 - M

TA VOL

, 0-63. , . E , . , 1. BEEP 0-9 (0 = ).

LED ON/OFF M

LED ON LED OFF. LED KeyCard , , Key Card.

LEARN KC M

READ KC
KeyCard. K. KeyCard E PTY LANG M KeyCard. : M E EMANIK AIK. KeyCard. M KeyCard S-DX . DX 1 - Y , DX 3 - K (76.) .
M , , (. Short Additional Memory S.A.M.). A KeyCard , READ KC.
Coburg.RCM127 gr 26 14.05.2002, 11:24 Uhr
. LO 1 - Y LO 3 - K CD-Changer. AUX OFF. E AUX, AUX ON. . << >>. A VOL 0, , .

A DSC / T

E DSC. DSC I : 8 .
4 x 23 Watt Sinus ( DIN 45 324) 14,4 V

VOL FIX

Coburg.RCM127 gr 27 14.05.2002, 11:24 Uhr
(Casablanca RCM 127, Cannes RCM127, A FM: 30 - Hz Woodstock DJA): K AM ON A : 30 - Hz Changer A : 5 - Hz M !
MIX RM LOUDNESS TA VOL BEEP LED LEARN KC READ KC PTY LANG S - DX S - LO VOL FIX

OFF OFF 4 ON ENGLISH 0

E : UKW (FM):

87,5 - 108 MHz

E FM:0,9 V 26 dB
(Casablanca RCM 127, Cannes RCM 127, Woodstock DJA) MW (): 531 - 1602 kHz LW (): 153 - 279 kHz

AUX ON/OFF T

M 4 x 35 Watt
Coburg.RCM127 gr 28 14.05.2002, 11:24 Uhr

BLAUPUNKT,

1. , . , . . , , , , . 2. (12) . 3. . 4. , 1. : . . , . BLAUPUNKT-WERKE GmbH Hildesheim,
Coburg.RCM127 gr 29 14.05.2002, 11:24 Uhr

Blaupunkt-Werke GmbH

Bosch Gruppe

3/97 K7/VKD (GR)

Coburg.RCM127 gr 30 14.05.2002, 11:24 Uhr