When answering is done on the phone, ongoing call will be heard on the phone (not on the Supertooth). But if you wish to hear and transfer the audio to the Supertooth, just press the Pick-Up/Hang-Up button once on the Supertooth. To terminate the call, press down the Pick-Up/Hang-Up Button.
MAKING A CALL with the Supertooth on Normal dialing With your Device you can make a call using different methods. Please refer to your PC Phones User Guide. The most direct method is by using the Phone keypad. 1. Press a keypad to bring up the dialer screen. 2. Press the number on the keypad, and then press the green call key. Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio will be heard on the phone and not immediately on the Supertooth. If this is the case you have to press once on the Pick-Up/Hang-Up Button to transfer the audio to the Kit. 3. To terminate the call, press down the Pick-Up/Hang-Up Button. Redial Calls the last number dialed from the phone. 1. Press and hold the Pick-Up/Hang-Up key on the Supertooth for 3 seconds.
AUDIO TRANSFER DURING A CALL Kit to Phone Flip down the Swivel Arm to 0 position (or turn-off the unit). This will automatically transfer the audio from the kit to the phone. Phone to Kit Flip the Swivel Arm up from 0 to 55or 210 position (Turn-On the Kit). Then press shortly the Pick-Up/Hang-Up Button. The audio will be transferred from the phone to the kit. Audio Transfer back to the Supertooth is done by pressing the Jog wheel and selecting Activate Supertooth
REJECTING A CALL Rejecting a call can be done by selecting IGNORE on the phone or pressing the Reject button on the Supertooth II. SETTING THE VOLUME Setting the volume can be done using the Volume Control. 1. Turn it clockwise to increase the volume. 2. Decrease the volume by turning it counter-clockwise. 3. Volume can also be adjusted using the phones volume control. Note: If the volume is too high, it can cause feedback (whistling sound), echo or background noise during calls on some cell phones.

IMATE POCKET PC / JAM

Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest version. You will need to register your device to download updates. For Imate go to www.clubimate.com a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your Imate to establish a Bluetooth connection between your Pocket PC device and other Bluetooth devices. 1. Tap. Scroll down to Settings. Tap Connections. Tap Bluetooth. 2. Select On and tap ok. 3. Tap to exit. PAIRING TO THE CELLULAR PHONE 1. Bring your Imate to within about 20 cm from the Handsfree Kit. 2. The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55 position. The Bluetooth Indicator will glow (blue blink). 3. Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree Pairing Mode. 4. Press the Pick-Up/Hang-Up Button once again for a short time to access Headset Pairing Mode. The Supertooth is now in the correct pairing mode for the Imate. (most important) 5. Tap. Scroll down to Settings. Tap Connections tab. Tap Bluetooth. 6. Tap Bonded Devices tab. Tap New. Your device now searches for Bluetooth devices and displays them in the list. 7. Tap the name of the device that you want to bond with your PC phone, and then tap Next. 8. Enter 0000 as the Device PIN and then tap Next. 9. Tap Finish. (Note: In Name, you may or may not edit the name of your bonded device). 10. For the question, This Bluetooth device supports headset profile, would you like to set it as your Blue tooth headset?, tap Yes. 11. Tap ok, and then to exit. The Handsfree Kit is paired with your Imate. An enabled Bluetooth icon will be seen on screen indicating that the Handsfree Kit is linked with the Imate. c. ANSWERING/RECEIVING A CALL When the phone is receiving a call, two dissimilar ring tones will be heard from the phone and then from the Handsfree Kit. 1. When answering is done on the Handsfree Kit (that is, pressing Send once), audio will be heard on it. 2. When answering is done on the phone, ongoing call will be heard on the phone (not on the Handsfree Kit). But if you wish to hear and transfer the audio to the Handsfree Kit, just press the Send button once on the Supertooth. 3. To terminate the call, press down the Pick-Up/Hang-Up Button.

I-MATE SMARTPHONE 2

Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest version. You will need to register your device to download updates. For Smartphone 2 go to www.clubimate.com a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your Smartphone2 to establish a Bluetooth connection between your device and other Bluetooth devices. 1. Tap. Scroll down and Tap Settings. Tap Bluetooth. 2. Scroll to On and Tap Done. PAIRING TO THE CELLULAR PHONE 1. Bring your Smartphone2 to within about 20 cm from the SuperTooth. 2. The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55 position. The Bluetooth Indicator will glow (blue blink). 3. Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree Pairing Mode. 4. Press the Pick-Up/Hang-Up Button again. Press shortly (release immediately). Bluetooth indicator blinking will be faster. The Supertooth II is now in Headset Pairing Mode. 5. Tap. Scroll down and Tap Settings. Tap Bluetooth and then Menu. 6. Tap Bonded Devices tab. Tap Menu and then New. (Smartphone2 will now search for devices) 7. Scroll to SuperTooth and select Add. 8. Enter 0000 as the Device PIN and then tap Done. 9. (Note: In Name, you may or may not edit the name of your bonded device). 10. For the question, This Bluetooth device supports headset profile, would you like to set it as your Bluetooth headset?, tap Yes. 11. Tap ok, and then exit. The Handsfree Kit is paired with your Smartphone2. c. ANSWERING/RECEIVING A CALL When the phone is receiving a call, two dissimilar ring tones will be heard from the phone and then from the SuperTooth. 1. When answering is done on the SuperTooth (that is, pressing Pick-Up/Hang-Up once), audio will be heard on it. 2. When answering is done on the phone, ongoing call will be heard on the phone (not on the SuperTooth). But if you wish to hear and transfer the audio to the Handsfree Kit, just press the Send button once on the SuperTooth. 3. To terminate the call, press down the Pick-Up/Hang-Up Button.

MAKING A CALL with the Supertooth on Normal dialing With your Device you can make a call using different methods. Please refer to your PC Phones User Guide. The most direct method is by using the Phone keypad. 3. Press button to bring up the dialer screen. 4. Tap the number on the keypad, and then tap Talk key on the phone. Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio will be heard on the phone and not immediately on the Supertooth. If this is the case you have to press once on the Pick-Up/Hang-Up Button to transfer the audio to the Kit. 5. To terminate the call, press down the Pick-Up/Hang-Up Button. Redial Calls the last number dialed from the phone. Redialing must be done while in the Today screen. 1. Press and hold the Pick-Up/Hang-Up key on the Supertooth for 3 seconds.
AUDIO TRANSFER DURING A CALL Kit to Phone Flip down the Swivel Arm to 0 position (or turn-off the unit). This will automatically transfer the audio from the kit to the phone. Phone to Kit Flip the Swivel Arm up from 0 to 55or 210 position (Turn-On the Kit). Then press shortly the Pick-Up/Hang-Up Button. The audio will be transferred from the phone to the kit. Audio Transfer back to the Phone can also be done by accessing the phones Bluetooth Headset icon at the top of the screen.
REJECTING A CALL Rejecting a call must be done by selecting IGNORE on the phone or pressing the Reject button on the Supertooth. SETTING THE VOLUME Setting the volume can be done using the Volume Control. 1. Turn it clockwise to increase the volume. 2. Decrease the volume by turning it counter-clockwise. 3. Volume can also be adjusted using the phones volume control. RECONNECTING The latest Rom from HP does not support auto-reconnect on the Supertooth. To reconnect after turning the Supertooth back on or coming into range 1. Press the Pick-Up/Hang-Up button on the supertooth. Wait for the connection to happen. Then press Pick-Up/Hang-Up. OR 2. Go to the Bluetooth Manager Tap and Hold the Supertooth, select Connect. Note: If the volume is too high, it can cause feedback (whistling sound) , echo or background noise during calls on some cell phones. 27

MOTOROLA A1000 / A925 / A835
a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Tap Menu icon at top right of screen. Tap Control Panel, Tap Connections, Tap Bluetooth. Tap Settings. For Operation Mode select Bluetooth On. 2. Tap Done. PAIRING TO THE CELLULAR PHONE (not possible during charging) 1. Bring the cellular phone at about 20 cm from the Supertooth. 2. The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55 position. The Bluetooth Indicator will glow (blue blink). 3. Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree Pairing Mode. 4. Tap Menu icon at top right of screen. Tap Control Panel, Tap Connections, Tap Bluetooth, Tap Devices 5. Tap Add. 6. On the scan results, Tap the Supertooth device you want to bond with your cell phone. 7. Tap your keyboard, Enter Bluetooth passkey 0000 then Tap Done. If pairing is successful Supertooth will be listed. 8. Tap the Supertooth to view options. Tick Allowed to connect without confirmation 9. Tap Done. The Handsfree Kit is paired and ready to use. c. ANSWERING/RECEIVING A CALL When the phone is receiving a call, a ring tone will be heard on the Supertooth. 1. Just press once on the Pick-Up/Hang-Up Button to answer the call. 2. If you wish to answer the call on your cellular phone, just Tap Pick-Up/Hang-Up on the phone. 3. To terminate the call, press the Pick-Up/Hang-Up Button. MAKING A CALL with the Handsfree Kit on Normal dialing 1. Enter the contact number and press SEND/ANS key. Audio can be heard on the Handsfree Kit. 2. To terminate a call, press the Pick-Up/Hang-Up Button. Redialing Pressing the Pick-Up/Hang-Up button on the Supertooth once will bring up call history, and again will call the last number dialed. e. AUDIO TRANSFER Kit to Phone
Flip down the Swivel Arm to 0 position (or turn-off the unit). This will automatically transfer the audio from the kit to the phone. Phone to Kit Flip the Swivel Arm up from 0 to 55or 210 position (Turn-On the Kit). Then press shortly the Pick-Up/Hang-Up Button. The audio will be transferred from the phone to the kit. f. REJECTING A CALL Tap Busy on your phone. SETTING THE VOLUME Setting the volume can be done using the Volume Control. 1. Turn it clockwise to increase the volume. 2. Decrease the volume by turning it counter-clockwise. Note: If the volume is too high, it can cause feedback (whistling sound), echo or background noise during calls on some cell phones.

MOTOROLA V3 / V80 / V525 / V535 / V600 / V620 / E398
a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. or press on the center button of the 5-Way 1. Press Menu key featured as NavigationKey featured as to access Menu. Scroll to Settings, SELECT. Choose Connection, SELECT. Bluetooth Link, SELECT. Scroll to Setup, Select. Scrool to Power, Select. Choose ON Continue pressing Back, to exit.

2. 3. b.

PAIRING TO THE CELLULAR PHONE (not possible during charging) 1. Bring the cellular phone at about 20 cm from the Handsfree Kit. 2. The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55 position. The Bluetooth Indicator will glow (blue blink). 3. Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree Pairing Mode. 4. Press Menu key or press the center button of the 5-Way Navigation key to access Menu. Scroll to Settings, SELECT. Choose Connection, SELECT. Bluetooth Link, SELECT. Choose Handsfree, SELECT. [Look for devices], SELECT. The phone will then scan the device to be added. On the scan results, choose the Supertooth, SELECT. A question Bond with (device name)? appears. Press YES. Enter Bluetooth passkey 0000 then press ok. If pairing is successful, a remark Connected to appears. The phone exits automatically.

5. 6. 7.

The Handsfree Kit is paired and ready to use. c. ANSWERING/RECEIVING A CALL When the phone is receiving a call, a ring tone will be heard on the Handsfree Kit. 1. Just press once on the Pick-Up/Hang-Up Button to answer the call. 2. If you wish to answer the call on your cellular phone, just press the Menu key of the phone. On the Call Menu, scroll down to Use Handset, SELECT. Audio will be heard on the phone. Pressing back on the Pick-Up/Hang-Up Button of your Supertooth will transfer the audio back to it. 3. To terminate the call, press the Pick-Up/Hang-Up Button. d. MAKING A CALL with the Handsfree Kit on
Normal dialing 1. Enter the contact number and press SEND/ANS key. Audio can be heard on the Supertooth. 2. To terminate a call, press the Pick-Up/Hang-Up Button.
Voice dialing Refer to step h and i for the procedure when activating and recording for voice dialing. 1. Press the Pick-Up/Hang-Up Button once to activate the voice dialing. 2. A beep will then be heard on the Handsfree Kit prompting the user to say the name of the person to call. 3. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cell phone does not recognize the name spoken, the steps above may be repeated. 4. Press the Pick-Up/Hang-Up Button to terminate the call. Redialing Make a long press on the Pick-Up/Hang-Up Button to redial the last number. e. AUDIO TRANSFER Audio Transfer can be done by accessing the cell phones menu during ongoing calls. Kit to Phone Flip down the Swivel Arm to 0 position (or turn-off the unit). This will automatically transfer the audio from the kit to the phone.

NOKIA 6255/6230/6820/6650/6310/6310i
a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Press Menu and select Settings, Connectivity and Bluetooth. (For 6310 Press Menu and select Bluetooth) 2. Select Blue tooth on and On. 3. b. Continue pressing Back then finally Exit.
PAIRING TO THE CELLULAR PHONE (not possible while charging the Handsfree Kit) 1. Bring the cellular phone at about 20 cm from the Handsfree Kit. 2. The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55 position. The Bluetooth Indicator will glow (blue blink). 3. Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree Pairing Mode. 4. Press Menu and select Settings, Connectivity and Bluetooth. 5. Select Search for audio enhancements. The phone now searches for Bluetooth devices to be paired. When the search is complete, it displays the names of the devices found. 6. Choose the device you want to pair with your phone, Select. 7. Enter 0000 as the passcode then press ok. 8. Continue pressing Back then finally Exit. The Handsfree Kit is paired and ready to use. An icon will be displayed during the standby mode indicating that the Handsfree Kit is linked with the phone. Once paired, keypad tones can be heard on the Handsfree Kit. Pairing is done only once. When the Handsfree Kit is turned off, then turned back on, it automatically connects to the cell phone. That is, when you have already activated the cell phones Auto Accept Mode. (Kindly refer to section c. AUTO ACCEPT MODE). When the paired device is deleted, it can still be viewed as an active device and not yet completely disconnected. Thus, there will still be simultaneous connection between your Handsfree Kit and cell phone even after deleting was done. But when you delete the pairing and at the same time, turn off your Handsfree Kit, you automatically disconnect the bond. When the paired device was deleted and the Handsfree Kit was turned off, no need to undergo the same pairing procedure. When you turn back on the Handsfree Kit, the phone displays a question, Pair with? Press Accept, enter 0000 as the passcode and press ok.
AUTO ACCEPT MODE The auto accept mode allows the Bluetooth function to be turned on automatically whenever the user starts sending information such as answering or making a call via the Handsfree Kit. 1. Press Menu and select Settings, Connectivity and Bluetooth. 2. Select Paired devices. Choose Supertooth and press Options. 3. Select Request conn. authorisation. 4. Select No. 5. Continue pressing Back then finally Exit. 33
ANSWERING/RECEIVING A CALL When the phone is receiving a call, same ring tone will be heard simultaneously on the Handsfree Kit as well as on the phone. 1. Press once on the Pick-Up/Hang-Up Button to answer the call. 2. End the call by pressing the Pick-Up/Hang-Up Button. Note: Cell phone buttons can also be used to answer a call but audio will still be heard on the Handsfree Kit. MAKING A CALL with the Handsfree Kit on Normal dialing 1. Using your phone, enter the contact number and press call key. As you dial, keypad tones can be heard on the Handsfree Kit, not on the phone. 2. Press the Pick-Up/Hang-Up Button to terminate the call. Voice dialing Refer to step i for the procedure when recording for voice dialing. 1. Press once on the Pick-Up/Hang-Up Button to activate the voice dialing. 2. A beep will then be heard on the Handsfree Kit prompting the user to say the name of the person to call. 3. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cellular phone does not recognize the name spoken, the steps above may be repeated. 4. Press the Pick-Up/Hang-Up Button to terminate the call. Redialing Make a long press on the Pick-Up/Hang-Up Button to redial the last number.

Note: Audio will be heard directly on the Handsfree Kit. At times, for first time dialing, audio will be heard on the phone and not immediately on the Handsfree Kit. If this is the case you have to press once on the Send Button to transfer the audio to the Kit. 2. d. To terminate the call, press down the Pick-Up/Hang-Up Button.
AUDIO TRANSFER DURING A CALL Kit to Phone Flip down the Swivel Arm to 0 position (or turn-off the unit). This will automatically transfer the audio from the kit to the phone. Phone to Kit Flip the Swivel Arm up from 0 to 55or 210 position (Turn-On the Kit). Then press shortly the Pick-Up/Hang-Up Button. The audio will be transferred from the phone to the kit.
REJECTING A CALL Rejecting a call must be done on the phone. SETTING THE VOLUME Setting the volume can be done using the Volume Control. 1. Turn it clockwise to increase the volume. 2. Decrease the volume by turning it counter-clockwise. Note: If the volume is too high, it can cause feedback (whistling sound), echo or background noise during calls on some cell phones.

02 XDA11s

Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest version. You will need to register your device to download updates. For Xda11s go to www.seeo2.com a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your device to establish a Bluetooth connection between your Pocket PC device and other Bluetooth devices. 1. Tap the Bluetooth icon in the bottom right of your today screen. 2. Tap Turn Bluetooth ON b. PAIRING TO THE CELLULAR PHONE (not possible while charging) 1. Bring your Phone to within about 20 cm from the Supertooth. 2. The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55 position. The Bluetooth Indicator will glow (blue blink). 3. Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree Pairing Mode. 4. Tap the Bluetooth icon in the bottom right of your today screen. 5. Tap Bluetooth Manager 6. Tap New. 7. Tap Handsfree/Headset SetupTap Next Your device now searches for Bluetooth devices and displays them in the list. 8. Select display All Devices 9. Tap the name of the device, Supertooth, and then tap Next. 10. Enter 0000 as the Device PIN and then tap OK. 11. Tap Finish. 12. For the question, Do you want to set this device as the default Handsfree device, tap Yes. 13. Tap ok, and then to exit. The Supertooth is now paired with your Phone. An enabled Bluetooth icon will be seen on screen indicating that the Supertooth is linked with the Phone. c. ANSWERING/RECEIVING A CALL When the phone is receiving a call, two dissimilar ring tones will be heard from the phone and then from the Supertooth. 1. When answering is done on the Supertooth (that is, pressing Pick-Up/Hang-Up once), audio will be heard on it. 2. When answering is done on the phone, ongoing call will be heard on the phone (not on the Supertooth). But if you wish to hear and transfer the audio to the Supertooth, just press the Pick-Up/Hang-Up button once on the Supertooth. 3. To terminate the call, press down the Pick-Up/Hang-Up Button.

MAKING A CALL Normal dialing With your Phone you can make a call using different methods. Please refer to your PC Phones User Guide. The most direct method is by using the Phone keypad. 1. Tap the number on the phones keypad, and then press the Talk key on the phone. Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio will be heard on the phone and not immediately on the Supertooth. If this is the case you have to press once on the Pick-Up/Hang-Up Button to transfer the audio to the Kit. 2. To terminate the call, press down the Pick-Up/Hang-Up Button on the Supertooth or press End on the phone
Voice Dialing Set up voice commands for each contact as per the Phones manual. To activate voice dialing 1. Press the Pick-Up/Hang-Up button once on the Supertooth. 2. When prompted by a beep, say the name you wish to call. Redial Calls the last number dialed from the phone. 1. Press and hold for 3 seconds the Pick-Up/Hang-Up key on the Supertooth. e. AUDIO TRANSFER DURING A CALL 1. Audio Transfer to the phone and back during a call can be done by accessing the phones Menu and selecting Turn Handsfree ON/OFF. Kit to Phone Flip down the Swivel Arm to 0 position (or turn-off the unit). This will automatically transfer the audio from the kit to the phone. Phone to Kit Flip the Swivel Arm up from 0 to 55or 210 position (Turn-On the Kit). Then press shortly the Pick-Up/Hang-Up Button. The audio will be transferred from the phone to the kit. f. REJECTING A CALL Rejecting a call can be done from the Phone by selecting IGNORE or from the Supertooth by pressing the Reject Button Note: It is recommended to create a phone profile to use with the Supertooth. Configure phone volume and ring settings to suit your cars environment.

O2 XDA11 / XDA MINI

Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest version. You will need to register your device to download updates. For XDAII go to www.seeo2.com a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your XDAII to establish a Bluetooth connection between your Pocket PC device and other Bluetooth devices. 1. Tap. Scroll down to Settings. Tap Connections. Tap Bluetooth. 2. Select On and tap ok. 3. Tap to exit. PAIRING TO THE CELLULAR PHONE 1. Bring your XDAII to within about 20 cm from the Handsfree Kit. 2. The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55 position. The Bluetooth Indicator will glow (blue blink). 3. Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree Pairing Mode. 4. Press the Pick-Up/Hang-Up Button once again for a short time to access Headset Pairing Mode. The Supertooth is now in the correct pairing mode for the XDAII. (most important) 5. Tap. Scroll down to Settings. Tap Connections tab. Tap Bluetooth. 6. Tap Bonded Devices tab. Tap New. Your device now searches for Bluetooth devices and displays them in the list. 7. Tap the name of the device, that you want to bond with your PC phone, and then tap Next. 8. Enter 0000 as the Device PIN and then tap Next. 9. Tap Finish. (Note: In Name, you may or may not edit the name of your bonded device). 10. For the question, This Bluetooth device supports headset profile, would you like to set it as your Blue tooth headset?, tap Yes. 11. Tap ok, and then to exit. The Handsfree Kit is paired with your XDAII. An enabled Bluetooth icon will be seen on screen indicating that the Handsfree Kit is linked with the XDAII. c. ANSWERING/RECEIVING A CALL When the phone is receiving a call, two dissimilar ring tones will be heard from the phone and then from the Handsfree Kit. 1. When answering is done on the Handsfree Kit (that is, pressing Send once), audio will be heard on it. 2. When answering is done on the phone, ongoing call will be heard on the phone (not on the Handsfree Kit). But if you wish to hear and transfer the audio to the Handsfree Kit, just press the Send button once on the Supertooth. 3. To terminate the call, press down the Pick-Up/Hang-Up Button.

1. Press button to bring up the dialer screen. 2. Tap the number into the keypad, and then tap Talk key. Note: Audio will be heard directly on the Handsfree Kit. At times, for first time dialing, audio will be heard on the phone and not immediately on the Handsfree Kit. If this is the case you have to press once on the Send Button to transfer the audio to the Kit. 3. To terminate the call, press down the Pick-Up/Hang-Up Button. e. AUDIO TRANSFER DURING A CALL 1. Audio Transfer back to the Xphone can be done by accessing the icon. phones Bluetooth Headset Phone to Kit Flip the Swivel Arm up from 0 to 55or 210 position (Turn-On the Kit). Then press shortly the Pick-Up/Hang-Up Button. The audio will be transferred from the phone to the kit. f. REJECTING A CALL Rejecting a call must be done by selecting IGNORE or pressing the Reject button on the Xphone. SETTING THE VOLUME Setting the volume can be done using the Volume Control. 3. Turn it clockwise to increase the volume. 4. Decrease the volume by turning it counter-clockwise. Note: If the volume is too high, it can cause feedback (Whistling sound), echo or background noise during calls on some cell phones.

PALM TREO 650

Note: Please make sure you have the latest firmware upgrade for your phone. Go to the support section of the following website to check you have the latest version. You will need to register your device to download updates. For Treo 650 go to www.palmone.com/au a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your phone to establish a Bluetooth connection between your Pocket PC device and other Bluetooth devices. 1. Press the Home Button to bring up the main menu. 2. Tap the Bluetooth icon 2. Tap On. PAIRING TO THE CELLULAR PHONE (not possible while charging) 14. Bring your phone to within about 20 cm from the Supertooth. 15. The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm(1) to the 55 position. The Bluetooth Indicator(9) will glow (blue blink). 16. Simultaneously press the Reject Button(2) and the Pick-Up/Hang-Up Button(7) for about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree Pairing Mode. 17. On your phone Tap the Bluetooth icon at the top of the screen. 18. Tap Setup Devices. Tap Hands-free Setup. Tap Next. 19. For Show Devices, Select All known devices 20. Your phone now searches for Bluetooth devices and will display them in the list. 21. Tap the name of the device, Supertooth, and then Tap OK. 22. Enter 0000 as the PassKey and then tap Done. 23. Tap Done to complete the process. The Supertooth is paired with your Treo 650. An enabled Bluetooth icon will be seen on screen indicating that the Supertooth is linked. c. ANSWERING/RECEIVING A CALL When the phone is receiving a call, two dissimilar ring tones will be heard from the phone and then from the Supertooth. 4. When answering is done on the Supertooth (that is, pressing Pick-Up/Hang-Up once), audio will be heard on it. 5. When answering is done on the phone, ongoing call will be heard on the phone (not on the Supertooth). But if you wish to hear and transfer the audio to the Supertooth, just press the Pick-Up/Hang-Up button once on the Supertooth. 6. To terminate the call, press down the Hang-Up Button. MAKING A CALL Normal dialing With your Phone you can make a call using different methods. Please refer to your PC Phones User Guide.

A beep will then be heard on the Handsfree Kit prompting the user to say the name of the person to call. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cellular phone does not recognize the name spoken, the steps above may be repeated. Press the Pick-Up/Hang-Up Button to terminate the call.
Redialing Make a long press on the Pick-Up/Hang-Up Button. It will trigger the cell phone to redial the last number. Audio will be heard on the Handsfree Kit. e. AUDIO TRANSFER Audio Transfer can be done by accessing the cell phones Menu during ongoing calls. Kit to Phone Flip down the Swivel Arm to 0 position (or turn-off the unit). This will automatically transfer the audio from the kit to the phone. Phone to Kit Flip the Swivel Arm up from 0 to 55or 210 position (Turn-On the Kit). Then press shortly the Pick-Up/Hang-Up Button. The audio will be transferred from the phone to the kit. REJECTING A CALL Press the Reject Button to reject an incoming call. SETTING THE VOLUME Setting the volume can be done during calls only. 1. Turn it clockwise to increase the volume. 2. Decrease the volume by turning it counter-clockwise. Note: If the volume is too high, it can cause feedback (whistling sound), echo or background noise during calls. RECORDING FOR VOICE DIALING Use your phone when recording for voice dialing. Record your contact names and numbers in the Address book (phone memory). 1. From standby mode, open the Address book by pressing the arrow down key. (If Phonebook is the one displayed, press key to switch to Address book.) 2. Select a contact name then press Options. 3. Scroll to Voice dialing, SELECT. New, SELECT. Recording for: contact name,YES. Follow the instructions. Your voice will automatically be saved on the phone after being played back to you. 4. In case you wish to change your recorded voice, press Options button. Voice tags, SELECT. Change, SELECT. Instructions appear. 5. Press On/Off/End key to exit. Note: Noisy environment may affect voice recognition. Record your voice in a quiet place.

SIEMENS SX1

a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your mobile phone to establish Bluetooth connection between it and other Bluetooth devices. 1. 2. 3. 4. b. Press Menu key Setup Bluetooth. Change.
is highlighted. Press Options Choose On and press Ok. Continue pressing until you finally Exit.

RECORDING FOR VOICE DIALING Note:Voice dialing entries must be stored in the phones memory (not on the SIM card!). 1. 2. 3. Press Menu Key Contacts. Choose and Open an entry you want to make a voice dial. Under the selected entry, highlight the phone number and press Options Add voice tag. 4. Follow the instructions displayed on screen. Note: You may use any word(s) or just use the persons name for a voice tag. 5. Wait until the word(s) is repeated and automatically saved by the phone. 6. Continue pressing until you finally Exit. Note: Record a voice in quiet environment. Voice tags are sensitive to loud background noise.
SONY ERICSSON K700i / S700i / Z1010 / Z600 / T610 / T628 / T630
a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your phone to establish a Bluetooth connection between your cell phone and other Bluetooth devices. 1. 2. 3. b. Press to access Main Menu. Scroll to Connectivity, Select. Bluetooth, Select. Turn On, Select. Continue pressing to exit.
PAIRING TO THE CELLULAR PHONE (not possible while charging the Handsfree Kit) 1. Bring the cellular phone at about 20 cm from the Handsfree Kit. 2. The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55 position. The Bluetooth Indicator will glow (blue blink). 3. Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree Pairing Mode. 4. 5. 6. 7. 8. Press to access Main Menu. Scroll to Connectivity, Select. Choose Bluetooth, Select. Scroll to My devices, Select. New device, Add. The phone will then search for pairable devices to be added. The searched devices will then be displayed. Choose the device name you want to pair with this phone, then press Select. Enter 0000 as the passcode then press Ok. If pairing is successful, the alternating red/blue lights (Bluetooth Indicator) will stop and will change to plain blinking blue. Your device name is now added under My devices tab. Highlight the newly paired device and then press Connect to completely establish connection between your cell phone and your hands free kit. When a statement appeared indicating that your device is connected, continue pressing to exit. The Handsfree Kit is paired and ready to use. Notes: You only have to do the pairing process once for a particular phone. You will only redo the process if you want to pair it with another mobile phone. If you turn off your Hands-free kit, it will disconnect with your phone. If you turn it back on, you can reconnect by shortly pressing the Pick-Up/Hang-Up Button on the Supertooth once for T610/T628/T630. For K700i/S700i/Z1010/Z600 press the Pick-Up/Hang-Up button twice (Once will connect and then activate voice dialing on some versions).

RECORDING FOR VOICE DIALING Note:Voice dialing entries must be stored in the phones memory (not on the SIM card!). 1. Press to access Main Menu. Scroll to Settings and press Select. Choose Voice control, Select. Voice dialing, Select. Edit names, Select. New voice, Add. (Contacts list will appear). Choose among the contacts whichever you want to have a voice name/voice tag. When its highlighted, press Select. Follow the instructions that will be displayed on screen. Note: You may use any word(s) or just say the persons name for a voice tag. When your spoken word(s) is caught up by the phone, it will ask you to listen to your recording and will ask the question Is it ok? As soon as you press Yes as reply, your voice command will be saved. Under Voice Commands tab, a callout icon will appear next to a contact name which has a voice command. Continue pressing to exit.

2. 3. 4. 5.

SETTING TO LOW POWER MODE (optional settings on some models) 1. Press Menu key. Scroll to Connectivity, SELECT. Bluetooth, SELECT. 2. Scroll to Handsfree, SELECT. Choose Car handsfree, SELECT. 3. Choose Power Save, SELECT. 4. Continue pressing to exit. Note: Voice Answer is not supported by the Supertooth. Note: Please see the Additional information on Resetting phones on Page15. Note: Noisy environment affects voice recognition. Record voice dial in a quiet environment.
SONY ERICSSON P800 / P900 / P910
a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your cell phone to establish a Bluetooth connection between your mobile phone and other Bluetooth devices. 1. Flip to open mode. On the phones Applications window, scroll to Control Panel and tap it using the stylus. On the lower portion, tap Connections index. Tap Bluetooth. Tap Settings index. On the Operation mode, tap On. 2. Tap to exit and return to the Applications window. PAIRING TO THE CELLULAR PHONE (not possible while charging the Handsfree Kit) 1. Bring the cellular phone at about 20 cm from the Handsfree Kit. 2. The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55 position. The Bluetooth Indicator will glow (blue blink). 3. Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree Pairing Mode. 4. Press the Pick-Up/Hang-Up Button once again for a short time, to access Headset Pairing Mode. 5. Flip to open mode. On the phones Applications window, scroll to Control Panel and tap it. On the lower portion, tap Connections index. Tap Bluetooth. Tap Devices index. Bluetooth devices are displayed as a sub-title. Tap Add. The phone is now searching for pairable devices. 6. On the lower left corner of the screen, tap. Enter 0000 as the passkey then tap Done. Also tap Done under the sub-title, Secure Connection. If pairing is successful, the alternating red/blue lights will stop. 7. Tap to exit and return to the Applications window. If the pairing is unsuccessful, the steps above may be repeated. 8. Tap on Phone Symbol on main screen. Tap edit. Tap Preferences. Tap Handsfree. For Bluetooth Preferred Sound Device, select Headset. Press Done to exit. The Handsfree Kit is paired and ready to use. An icon will appear during the standby mode indicating that the Handsfree Kit is linked with the phone. Note: Make sure your device has the latest firmware from Sony Ericsson. c. ANSWERING/RECEIVING A CALL When the phone is receiving a call, a ring tone will be heard on the Handsfree Kit. 1. Just press the Pick-Up/Hang-Up Button once to answer the call. 2. If you wish to answer a call on the cellular phone, just press YES and the audio will be on the phone. Pressing the Pick-Up/Hang-Up Button will transfer the audio to the Handsfree Kit. 3. To terminate the call, press the Pick-Up/Hang-Up Button. MAKING A CALL with the Handsfree Kit on Normal dialing 1. Enter the contact number and press OK. Audio will automatically be heard on the Handsfree Kit. 2. Press the Pick-Up/Hang-Up Button to terminate the call.

Voice dialing Refer to step g and h for the procedure when activating and recording for voice dialing. 1. Press the Pick-Up/Hang-Up Button once to activate the voice dialing. 2. A beep will then be heard on the Handsfree Kit prompting the user to say the name of the person to call. 3. Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cell phone does not recognize the name spoken, the steps above may be repeated. 4. Press the Pick-Up/Hang-Up Button to terminate the call. e. AUDIO TRANSFER Audio Transfer can be done by accessing the cell phones Menu during ongoing calls. SETTING THE VOLUME Setting the volume can be done using the volume control. 1. Turn it clockwise to increase the volume. 2. Decrease the volume by turning it counter-clockwise. Note: If the volume is too high, it can cause feedback (whistling sound), echo or background noise during calls on some cell phones. ACTIVATING THE VOICE DIALING Use your phone when recording for the voice dialing. Before voice dialing, you must first turn on the name dialing function and record your voice. To turn voice dialing on: 1. Flip to open mode. On the phones Applications window, tap Phone. 2. Tap Edit then Preferences. A list of features will appear. 3. Tap Voice Control then tap the box aligned to Voice dialing to check and activate the voice dialing feature. Tap the box aligned to Play caller name to check so that the name will be played back to you. 4. Tap Done on the on screen button when finished. 5. On the Preferences mode, tap Done again. 6. Tap to exit and return to the Applications window.
RECORDING FOR VOICE DIALING The voice dialing feature is only applicable to contacts saved to phone memory. 1. Flip to open mode. On the phones Applications window, tap Contacts. 2. Tap the contact where you want to add a voice dialing feature. Tap Edit. Scroll to Edit Contact. Tap on the on-screen buttons. 3. Tap Record. Speak after tone will be displayed on the screen. 4. Record your voice. To check if your recording is of good quality, tap Play. If not, tap Record again. Tap Done when finished. 5. Tap to make another record and repeat the steps above. To return to the Applications window, tap Noisy environment may affect voice recognition. Record your voice in a quiet environment.

Product Description

SUPERTOOTH LIGHT is a Bluetooth handsfree kit that supports headset or handsfree prole phones. Its special features include Full DSP Noise Cancellation/Echo Cancellation, thus, it provides advanced audio quality. It is designed for easy handsfree operation and superior performance. Dont forget: Drive safely and within the law. Check if the national or local legislation in your country does limit the use of mobile phones while driving. It is up to the user of this product to respect the said legislation in the area where they lives.

Product Overview

Accept Button End/Reject Button Bluetooth Indicator Charge Indicator Microphone Shaft *Press-and-release to Switch On *Push-in to Switch Off Speaker Volume Down Volume Up Charger Port

10 Magnets

Charging
When the Charge Indicator (4) turns Red, the kits battery is low. Charge the unit. 1. Connect the supplied charger to an external power source. Connect the chargers plug to the Charger Port (9) of the SUPERTOOTH LIGHT. Charge Indicator (4) Status: Steady Red: Low Battery Steady Orange: Charging Steady Green: Full Charge 2. When fully charged, disconnect the charger.

Power On/Off

Power On: Push in the Microphone Shaft (5) until you hear a click, and release. The shaft will spring out from the body of the unit and x in place. Power Off: Push the Microphone Shaft (5) inside the unit until it clicks.
First Time Pairing to your Bluetooth Mobile Phone
When you turn ON your Supertooth Light for the rst time, it will automatically go into Pairing mode ready to be found by devices in Bluetooth searches. This will be the case until you have successfully paired a phone. If you have already paired a phone, please go to the next section. 1. Power ON your Supertooth Light. The Bluetooth Indicator (3) will turn a blinking red/blue, The kit is now in pairing mode. 2. Go to Point 3 in the next section, Pairing to your Bluetooth Mobile phone
Pairing to your Bluetooth Mobile Phone
Pair the SUPERTOOTH LIGHT to your Bluetooth mobile phone to create a Pairing link, or audio connection between the two. This has to be only done once when rst connecting each new phone. 1. From OFF, Press and Hold the Accept Button (1).
2. While holding the Accept Button (1), switch the kit on (Press-and-release the Microphone Shaft (5)).
3. The Bluetooth Indicator (3) will turn a blinking red/blue, when you see this, release the Accept Button (1). The kit is now in pairing mode. 4. While the kit is in pairing mode, access the Bluetooth menu of your phone. Turn on the Bluetooth function then execute a Bluetooth search, or discover. (See your phones manual for specic instructions.) 5. When the phone displays the list of Bluetooth devices, select ST LIGHT. 6. When the phone asks for the password, enter 0000 and press Ok. 7. Set the ST LIGHT as a trusted/authorized device, if this is option in your phone. Important Note: The kit is now paired. Most phones automatically connect to the kit after pairing. With some phones you need to connect manually after pairing. Go back to Bluetooth > Paired devices > highlight ST LIGHT > press Options > then press Connect. When connected you may see the Bluetooth Symbol on your phone change slightly, either inverting in color or changing to a headset or car symbol. The kit is now ready to use. Repeat steps 1 -7 above for each new phone you want to use with the Supertooth Light.

Installation

Fix the metal clip of SUPERTOOTH LIGHT to the sun visor.
Attach the magnetic back of SUPERTOOTH LIGHT to the xed metal clip. The SUPERTOOTH LIGHT must be placed in such way that its microphone is directed to the mouth of the user.

Basic Operations

IMPORTANT: The kit needs to be paired to your Bluetooth mobile phone rst, before you can use the following functions. See Pairing to your Bluetooth Mobile Phone on page 3. Make a Call (Normal Dial): Dial the number on your phone. Audio will automatically be on the kit. Note: With some phones like Siemens S55 and Panasonic X70, audio is always on the phone during an outgoing call. You will need to press the Accept Button (1) for 1 second to transfer the audio to your kit. Answer a Call: During the ring tone, press Accept Button (1) for 1 second to answer the call. End a Call: Press End/Reject Button (2) for 1 second to end the call. Voice Dial: Important: Be sure your phone supports the voice dialing function and that it is activated. Record at least one voice tag. (Please refer to the instructions in your phones user manual.) Note: Voice dialing entries must be stored in the phones memory, not on the SIM card! 1. Press the Accept Button (1) for 1 second. 2. A voice dial beep will be heard on the kit to prompt the user to say the voice tag of the contact to call. 3. Say the voice tag exactly as how you recorded it. 4. The voice will be played back to you, and then the phone will dial the number automatically.

Redial (For Handsfree Prole Phones only): Press Accept Button (1) for 3 seconds. The last dialled number will be redialled. Reject a Call (For Handsfree Prole Phones only): During the ring tone, press End/Reject Button (2). The incoming call will be rejected. Volume Setting: Increase or decrease the volume by pressing the Volume Up (8) or Volume Down (7) button. Press repeatedly until desired level is reached. This setting will be remembered by the kit. Audio Transfer (For Handsfree Prole Phones only): During an ongoing call, you can transfer the audio. Kit to Phone: Push in the Microphone Shaft (5) or turn off the kit. The audio will be transferred automatically to the phone. Phone to Kit: Press-and-release the Microphone Shaft (5) to turn the kit on. Note: Some phones do not connect automatically to the kit after turning on. With these phones, you need to press Accept Button (1) for 1 second to transfer the audio to the kit.

Advanced Functions

Multi-Pairing / Switching Connections Between Phones: The SUPERTOOTH LIGHT can connect to only one phone at a time, but will remember the Pairing information of 5 Bluetooth phones. Each additional pairing after 5 phones, will automatically delete the phone that has not been used for the longest time. Thus, the SUPERTOOTH LIGHT always maintains 5 phones in its memory. You can easily switch to any of the paired phones by: 1. Disconnecting the currently used phone using the Active devices in the Bluetooth menu of that phone. 2. Connecting to the desired phone by using the Paired devices list in the Bluetooth menu of that wanted phone. Note: Reconnection to a paired phone may also be done by pressing the Accept Button (1). When you press the Accept Button (1), the SUPERTOOTH LIGHT will attempt to connect to the last used phone only. Therefore, it is recommended to connect to another paired phone using the phones menu.
Troubleshooting and Support Documents
Phone/Device Software Please make sure you have the latest rmware upgrade for your phone, especially if you are using a PDA Phone. Go to the support section of the manufacturers website to check you have the latest version. Many new mobile phones, pdas and computers phones require a Bluetooth patch to improve Bluetooth functionality from the original released version. Resetting Your Phone/Device Phones can become prone to software and memory issues which may cause Bluetooth reconnection problems. This can be xed simply by turning the phone off and back on again. The phone will be reset and the working memory cleared. See the support section of www.blueantwireless.com for troubleshooting and Frequently Asked Questions (FAQ).

Disclaimers

This manual is published by BlueAnt. The information contained in this document is subject to change without notice. All rights reserved. The Bluetooth word, mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by BlueAnt is under license. Other trademarks and trade names are those of their respective owners.

BlueAnt Warranty Process

1. Should you be having difculties in the operation of your device please refer to the online FAQ and support documents. 2. Check our website for more information, updated manuals and troubleshooting. www.blueantwireless.com 3. Call us and speak to one of the BlueAnt Wireless Customer Service Team We will clarify whether you have a hardware or connection issue. See back page for contact us details. 4. Return the unit directly to BlueAnt for testing and replacement of faulty items Please call to arrange a Return Merchandise Authorization (RMA) number. Warranty Terms and Conditions BlueAnt Warrant the original purchaser of this product only. BlueAnt will replace or repair any faulty product provided it has not been misused or abused in any way. There are no user serviceable parts inside this product. Using a non-authorized repairer will void the warranty. The Warranty is valid for 2 years (24 months) from the date of purchase. Proof of purchase must be supplied to obtain warranty. The Device must be in original packaging with serial number for warranty to be valid. Warranties are effective from the proof of purchase date and not from the date of any subsequent repair or replacement.
SUPERTOOTH LIGHT Specications
Bluetooth Compliance:. Bluetooth version 1.2 specications Supported Bluetooth Proles:. Supports headset and handsfree proles with automatic detection Operating Range:.. Up to 10 meters Frequency:.. 2.4 GHz Talk Time:.. Up to 15 hours Stand-by time:.. Up to 800 hours Charging Time:. 3 hours Battery Type:.. Rechargeable Lithium Ion Special Features: > Full Duplex > Full DSP Noise Cancellation / Echo Cancellation using CVC > Digital Volume Control > Voice Recognition Dialing (If phone supports) > Last Call Redial > Reject Incoming Call > Can also be charged directly from a PC via USB Cable (not included) > Compact Size
Installation:.. Quick installation on sun visor via magnetic clip Dimensions (mm):. 18.2 x 60.2 x 122 Weight:.. 115 g

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government ofce, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
This equipment is in compliance with the essential requirements and other relevant provisions of directive 1999/5/EC
FCC Notices This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. You are cautioned that changes or modications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. FCC RF Exposure requirements: This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.