Blumax Bluetooth Car-Kit Speech 002

Package Contents:

1 x Blumax Spech x Rechargeable Li-ion batterie 1 x 12-24 V Car Charger 1 x User Manual

Accesories:

Bluetooth wireless technology. Bluetooth wireless technology makes it possible to connect compatible communication devices without using cables. A Bluetooth connection does not require the devices to be in line of sight, but both devices should be within 10 meters (30feet) of each other. Connections can be subject to interference from obstructions. The car kit is compliant with Bluetooth Specication 2.0. There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider. For car, ofce and home Suitable for all Bluetooth telephones Full duplex sound quality Sun visor clip xation Rechargeble battery

Specications:

Bluetooth V2.0+EDR, Class II Operating Frequency Band: 2.4 GHz ~ 2.48 GHz unlicensed ISM band Working distance: up to 10 meters Integrated with echo cancellation and Noise suppressor Built in speaker and microphone Rechargeable Lithium Polymer Battery 3.7 V, 820 mAh Charging time: about 2-3 hours Talk time: about 4 hours Standby time: about 30 days Dimensions: 128 x 59 x 20 mm
Blumax Technologies Main Distrubtion:
Eurotronic Products GmbH Gewerbeparkstr. 14 D - 44339 Dortmund www.blu-max.eu Fon: +49 (0)Fax: +49 (0)e-Mail: info@eurotronic.net

Get started

Overview 1 - MUTE 2 - LED display 3 - MIC input 4 - Multi-function Button (MFB) 5 - Volume+ button 6 - Volume button 7 - Mini USB 5 PIN for the charging socket 8 - Speaker
Switch on and off the car kit To switch on, Press and hold the MFB multi-function button until there is a tone prompt and the blue LED ashes 5 times. The car kit is now on. To switch off, press and hold the MFB for 4 seconds until the red LED ashes 5 times. Pair the car kit with a compatible phone 1. Make sure your car kit is switched off. 2. Press and hold the MFB until the blue and red light ashes alternately and there is a tone prompt. The car kit is now in pairing state. 3. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. See the user guide of your phone for instructions. 4. Select the car kit (Speech 002) from the list of found devices. 5. Enter the pass code 0000 to pair and connect the car kit to your phone. In some phones you may need to make the connection separately after pairing. See the user guide of your phone for details. You only need to pair the car kit with your phone once. If the pairing is successful, the car kits blue light will ash 3 times briey. The car kits name appears in the phone menu where you can view the currently paired Bluetooth devices.
Mute During a call, press and hold mute button for about 2 second to mute the MIC, the same operation to withdraw from the MIC mute state. Main specications: Bluetooth V2.0+EDR, Class II Operating Frequency Band: 2.4 GHz ~ 2.48 GHz unlicensed ISM band Working distance: up to 10 meters Integrated with echo cancellation and Noise suppressor Built in speaker and microphone Rechargeable Lithium Polymer Battery 3.7 V, 820 mAh Charging time: about 2-3 hours Talk time: about 4 hours Standby time: about 30 days Dimensions: 128 x 59 x 20 mm Pack included: Car Charger, User Manual, Li-ion Batterie
Bluetooth Hands-Free Speakerphone

Speech 002

User Manual

LED indicator status:

Switch on: The blue LED ash ve times Standby state: Blue LED ashes once every 3 sec. Blue LED ashes once every 3 sec.
Before you start using the car kit, you must charge the battery and pair the car kit with a compatible mobile phone.

Basic use

Charger Call handling To make a call, use your phone in the normal way when the car kit is connected to your phone. And the blue LED will ash during the call. To answer a call, press the MFB and the blue LED will ash during the call. To reject a call, press the MFB for 2 second and there is a tone prompt when there is incoming call. To end a call, press the MFB one time. In standby state, press the volume+ key for 2 seconds to redial last dialed telephone No. This function requires your phone supports redialing. In standby state, press the MFB to start voice dialing. This function requires your mobile support voice dialing. Check the user manual of your mobile for details. Adjust the volume Press volume+ or volume- key to increase or to decrease the volume during a call.

Connecting status:

Introduction:
Thank you for your interest at our Bluetooth car kit. This car kit is a wireless Bluetooth kit based on the Bluetooth technology that allows you to making and talking calls without touching your mobile phone. Read this user guide carefully before using the car kit. Read also the user guide for your phone, which provides important safety and maintenance information. Keep the car kit out of reach of small children. Bluetooth wireless technology. Bluetooth wireless technology makes it possible to connect compatible communication devices without using cables. A Bluetooth connection does not require the devices to be in line of sight, but both devices should be within 10 meters (30feet) of each other. Connections can be subject to interference from obstructions. The car kit is compliant with Bluetooth Specication 2.0. There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.
This car kit is intended to use with the car charger that is included in the package. Charge the battery This device has a Rechargeable Lithium Polymer battery 3.7 V, 820 mAh battery. 1. Connect the car kit to the car charger. The red indicator light is displayed during charging. If charging does not start, disconnect the charger, pug it again, and retry. Charging the battery fully may take up to 2-3 hours. 2. When the battery is fully charged, the red indicator light turns off. Disconnect the car kit from the charger. The fully charged battery has power for up to 4 hours of talking time or up to 30 days of standby time. However, the talking and standby time may vary when used with different mobile phones, products that use a Bluetooth connection, usage settings, usage styles, and environments.