Reviews & Opinions
Independent and trusted. Read before buy Bosch GWS 24-230 BV!

Bosch GWS 24-230 BV

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Bosch GWS 24-230 Bv Freezer, size: 3.9 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Bosch GWS 24-230 BVAbout Bosch GWS 24-230 BV
Here you can find all about Bosch GWS 24-230 BV like manual and other informations. For example: review.

Bosch GWS 24-230 BV manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Bosch GWS 24-230 BV please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Bosch GWS 24-230 BV photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 12. Page 1 of 1. Average Rating:
bartola 3:59pm on Sunday, October 31st, 2010 
If you like drawing or painting or editing photos like myself,This my friend is for you! Yes it is a bit steep in price.
hoppetoppe 10:34pm on Sunday, October 17th, 2010 
This tablet is fantastic! I had a Bamboo and the Intous4 blows it away! Makes fine adjustments a snap. Upgraded from years of mousework and finally see what the big deal was! Good Control","Natural Feel
decvar 1:23am on Wednesday, September 22nd, 2010 
I have been using an Intuos 2 tablet for the ...  Spring loaded tip for digital designers looking to reduce hard clicks.
pjoseph133 10:33am on Wednesday, August 25th, 2010 
"very nice and responsive, only downfalls are small screen for the price... these tablet pads seem to be a little pricy for what they are i think... "Ok im only 13 but still I recomend this!
slipstick 12:54am on Monday, August 2nd, 2010 
This device its about....10=15% better in feel than a tablet. It will not solve your inability to make quality marks. I have worked on wacom tablets for 10+ years, worked in design for 13+, doing autonmotive and toy design. I am a college student that is heavily into graphic and web design. This is my first pen tablet and I am positive I have made the right decision!
spuppett 11:53pm on Thursday, July 29th, 2010 
"Great size. Not too big and not too small of an area to work with. I use it for touching up photographs on the computer and painting.
ganeshramiyer 9:03pm on Monday, May 31st, 2010 
Amazing Simply put, this tablet is amazing. I went from using the Intuos2 to this tablet and I was blown away. Wacom Rocks I have had Wacom tablets for years. This product is great. The drivers are always the easiest to install. Intuos 2 pen The pen works fine. The only complaint I have is that the nib sometimes is too short.
Jimmus 12:59pm on Tuesday, May 25th, 2010 
As posted in the weakness column they should change this stand a little so you can tilt this all the way up to 90 degrees so you can use it as a regul... As far as drawing digitally goes, this is by far the best thing out there. When compared to the 6x8 wacom tablet. Absolutely brilliant. I am using the display under MacOSX. Setting it up was a breeze - plug it in and install the drivers.
pucho 8:32pm on Monday, April 19th, 2010 
Wonderful blue tooth headphones for the price. Great sound quality, keeps sound out and very comfortable Last only about one year if used every day I have been using an Intuos 2 tablet for the past 8 years (yes they were sold in 2002). From experience.
camorri 11:59am on Wednesday, April 14th, 2010 
Good deal for the price. The sound is alright, a little better than I expected. I normally use a headphones when I want watch movies because I hate disturbing others when watching movies late night. So.
KungChinKwong 2:51pm on Thursday, April 8th, 2010 
This is my first Wacom. It is much nicer than my off-market tablet, and rightfully so, but I suppose I expected more luxury out of the price.
nzgutman 3:55pm on Sunday, March 21st, 2010 
I love the pen pad the size takes abit of getting used as I used the extra large size at work for several years but the medium is the perfect size for...

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc1

Fine nish. The ne grit produces a cleaner result than with commercially available grinding discs
Maximum work safety thanks to the optimum three-layer reinforcement of the disc. Manufactured in accordance with OSA guideline. Meets EN 12413

3-in-1 Disc

Cutting, grinding and nishing with one disc Suitable for metal and Inox Appropriate for hand-held angle grinders Maximum circumferential speed: 80 m/s (depending on rpm and disc diameter) Fe/S/Cl < 0.1%
nu mb er Pa ck ag ing typ Pa e ck qu an tit y Mi nim um or de rq Ba ua nt rco ity 31 de 0.
on Di am ete rm m Bo re dia me ter mm Th ick ne ss mm

Product properties

Ordering information

With depressed centre

A 46 S BF A 46 S BF 22.23 22.23 2.5 2.389 U0 U505260 GAA GAA 2.21 2.31
Cutting, Grinding and Brushing | Cutting Discs | 471

Cutting discs Rapido

Appropriate for hand-held angle grinders Maximum circumferential speed: 80 m/s (depending on rpm and disc diameter) Fe/S/Cl < 0.1% The thin Rapido disc offers many advantages: fast and clean cutting with little exertion of force, very accurate, less noise and dust, and no blue discolouration or burr formation
tio n Di am ete rm m Bo re dia me ter mm Th ick ne ss mm

Sp ec ic a

Straight Cut virtually everything without disc changes Cutting disc for metal, Inox, non-ferrous metals, stone, soft tiles, marble and plastics
C 60 T BF C 60 T BF C 60 T BF 125 22.23 22.23 22.23 1.0 1.0 1.383 U0 U0 UGAA GAA GAA 1.39 1.47 1.58

Rapido

Straight Rapido Standard, the low-cost solution for Inox and metal
AS 60 T INOX BF AS 60 T INOX BF 22.23 22.23 1.0 1.549 U0 U219624 GAA GAA 1.28 1.52
AS 46 T INOX BF 115 22.23 1.215 UGAA 1.28
With depressed centre Rapido Standard, the low-cost solution for Inox and metal
AS 46 T INOX BF AS 46 T INOX BF 22.23 22.23 1.6 1.711 U0 U262859 GAA GAA 2.50 2.67
Straight Rapido Long Life, extremely long life for Inox and metal
A 60 W BF 41 A 60 W BF 125 22.23 22.221 U0 U449243 GAA GAA 1.46 1.75

Rapido MultiConstruction

nt gro u
472 | Cutting, Grinding and Brushing | Cutting Discs

Cutting discs Metal

Appropriate for hand-held angle grinders Maximum circumferential speed: 80 m/s (depending on rpm and disc diameter)

Straight

A 30 R BF A 30 S BF A 30 S BF A 30 S BF A 30 S BF A 30 R BF 16.00 22.23 22.23 22.23 22.23 22.23 2.8 2.5 2.5 3.0 3.0 3.649 U0 U0 U0 U0 U0 U252829 GAA GAA GAA GAA GAA GAA 0.73 0.82 0.94 1.19 1.52 4.13

A 30 S BF A 30 S BF A 30 S BF A 30 S BF 22.23 22.23 22.23 22.23 2.5 2.5 3.0 3.226 U0 U0 U0 U116473 GAA GAA GAA GAA 0.99 1.14 1.50 2.04
Straight Appropriate for chop saws / stationary pendulum action cutters/grinders Maximum drive power of 3 bhp/2.4 kW
A 36 R BF 350 25.40 2.543 UGAA 4.69
Straight Appropriate for petrol-driven freehand cutting machines
A 24 R BF 300 20.00 3.706 UGAA 2.81
Straight Appropriate for Cordless Angle Grinder GWS 14,4 V Professional with SDS-pro tting
A 46 Q BF 100 22.23 1.700 UGAA 1.14
Cutting, Grinding and Brushing | Cutting Discs | 473

Cutting discs Inox

Appropriate for hand-held angle grinders Maximum circumferential speed: 80 m/s (depending on rpm and disc diameter) Fe/S/Cl < 0.1%
tio n Di am ete rm m Bo re dia me ter mm Th ick ne ss mm Sp ec ic a
A 60 W BF 41 A 60 W BF 125 22.23 22.23 1.0 1.221 U0 U449243 GAA GAA 1.46 1.75
A 46 R BF 100 22.23 1.701 UGAA 1.95
474 | Cutting, Grinding and Brushing | Cutting Discs

Cutting discs Stone

C 24 R BF C 24 R BF C 24 R BF C 24 R BF 22.23 22.23 22.23 22.23 2.5 2.5 3.0 3.227 U0 U0 U0 U116480 GAA GAA GAA GAA 1.14 1.30 1.57 2.15
C 30 S BF C 24 R BF C 24 R BF C 24 R BF C 24 R BF 230 16.00 22.23 22.23 22.23 22.23 2.8 2.5 2.5 3.0 3.326 U0 U0 U0 U0 UGAA GAA GAA GAA GAA 0.77 0.90 1.14 1.41 1.57
C 24 R BF 300 20.00 4.707 UGAA 2.81
Cutting, Grinding and Brushing | Grinding Discs | 475
Vibration Control grinding discs: Less vibration and less noise
Vibration and noise always occur during grinding work. Vibration is noticeably reduced with the new semi-exible Vibration Control grinding discs. This optimises the work result and makes work more user-friendly 120 dB 100 dB 80 dB 60 dB 40 dB 20 dB 0 dB Bosch Vibration Control Standard

Less noise when grinding

98 dB 110 dB
Thanks to its exibility, the disc adapts well to the surface of the material being worked on
Cool grinding, improved chip removal and less discolouration of the surfaces: the special wafe design makes it possible
Semi-exible grinding discs Vibration Control
For light grinding work. Thanks to the exibility of the disc, it is ideally suited to working on curved surfaces. Other advantages of the disc: less vibration and noise development, cool grinding (less heat discolouration). No backing pad required Suitable for use in Inox, metal and aluminium Fe/S/Cl < 0.1%

Bo re dia me ter mm Cu tti ng wi dt hm m Se gm en th eig ht mm

Lis t up gro

ice Lis t Pr ice Lis t Pr ice ex v at ex v at

Di am ete rm m

Appropriate for Cordless Angle Grinder GWS 14,4 V Professional With SDS-pro tting
100 22.23 1.C1c 293396 GBB 47.09
Velcro-type fastening plate for sanding sheets for GWS 14,4 V Professional
Pa ck ag ing typ Pa e ck qu an tit y Mi nim um or de rq Ba ua nt rco ity 31 de 0.
Velcro-type fastening plate max. speed 15,300 rpm Appropriate for GWS 14,4 V Professional and paper sanding sheets with Velcro-type fastening system

15,C1c 262866 GAT 14.18

Velcro-type fastening system
Cutting, Grinding and Brushing | Cup Wheels and Grinding Rings | 479
Cup wheels and grinding rings for wet and angle grinders
Conical cup wheels Metal, cast iron
Aluminium oxide cup wheel with synthetic resin bond Appropriate for two-hand angle grinders, maximum speed up to 8,500 rpm Clamping with locking nut and two-hole spanner bent at right angles 950 004
rt nu mb er Pa ck ag ing typ Pa e ck qu an tit y Mi nim um or de rq Ba ua nt rco ity 31 de 0.
Mi n. dia me ter mm Ma x. dia me ter mm He igh tm m

Product properties 24 36

Ordering information C0a C0a C0a 026352 GAT GAT GAT 15.83 15.83 15.83
Conical cup wheels Stone, concrete
Silicon carbide cup wheel with synthetic resin bond Appropriate for two-hand angle grinders, maximum speed up to 8,500 rpm Clamping with locking nut and two-hole spanner bent at right angles 950 004

600 241

C0a C0a C0a

002882

GAT GAT GAT

13.24 13.24 13.24

480 | Cutting, Grinding and Brushing | Cup Wheels and Grinding Rings
Protective guard for grinding rings
Protective guard for grinding rings with coded lugs, for all Bosch angle grinders with n-max. 6,500 rpm and n-max. 8,500 rpm Appropriate for GWS 20-180; GWS 20-180 J; GWS 20-180 (J)H; GWS 20-230; GWS 20-230 J; GWS 20-230 JH; GWS 21-180 (J)HV; GWS 21-230 (J)HV; GWS 22-180 (J)H; GWS 22-230 (J)H; GWS 23-180; GWS 23-180 J; GWS 23-230; GWS 23-230 J; GWS 24-180 (J)BV; GWS 24-180 (J)BX; GWS 24-180 JH; GWS 24-230 (J)BV; GWS 24-230 (J)BX; GWS 24-230 (J)H; GWS 25-180; GWS 25-180 J; GWS 25-230; GWS 25-230 J; GWS 26-180 (J)BV; GWS 26-180 JH; GWS 26-230 (J)BV; GWS 26-230 JH; GWS 180; GWS 180 J; GWS 230 Professional; PWS; PWS 20-230; PWS 20-230 J; PWS 1900

P0f 016919 GAT 109.44

Grinding wheels for Bosch straight grinders
Grinding wheels for straight grinders Aluminium oxide

Suitable for coarse grinding work on steel or cast iron Synthetic resin bond, aluminium oxide, two-sided conical
W he el dia me ter mm Th ick ne ss (b 1) mm Th ick ne ss (b 2) mm Bo re dia me ter mm Gr it

Lis t gro up

ice Lis t Pr ice ex v at
Appropriate for GGS 6 Professional; Type 1207

069 C0a 057301 GAT 20.83

Cutting, Grinding and Brushing | Dust Extraction and Protective Guards | 481
Dust extraction and protective guards for Bosch angle grinders
Appropriate machines Dust extraction guards for sanding
GWS 8-115 (H20 ) GWS 8-115 Z (H31 0.) GWS 8-125 (H27) GWS 10-125 (H21.) GWS 10-125 Z (H32 0.) GWS 11-125 CI (H22.) GWS 11-125 CIE (H23.) GWS 11-125 CIH (H30 1./B.) GWS 14-125 CI (H24.) GWS 14-125 CIE (H25.) GWS 14-125 CIT (H29.) GWS 15-125 CIH (H30 2./C.) GWS 15-125 CIEH (H30 3./D.) GWS 15-125 CITH (H30 4./E.) GWS 1000; (H21.) GWS 1400 Professional. (H24.) PWS 10-125 CE (C47 000/030) PWS 13-125 CE (C48 000) GWS 7-115 GWS 14-125 CE GWS 7-115 (700 0.) GWS 9-125 (701 0.) GWS 10-125 C (702 7.) GWS 10-125 CE (702 7.) GWS 14 -125 C (704 7.) GWS 14-125 CE (705 7.) PWS 6-100 (372 0.) PWS 6-115/PWS 620 (372 0.) PWS 10-125 CE PWS 13-125 PWS 600 (371 0.) PWS 700 (373 0.) PWS 6-115 (C99 2.; C99 3.; C99 4.) PWS 7-100 (C99 640) PWS 7-115 (C99 5.; C99 6.) PWS 7-125 (C99 7.; C99 8.) PWS 7-125 CE; PWS 8-125 CE PWS 8-125 CE (C99 B.; C99 9.; C99 A.) PWS 9-125 CE PWS 10-125 CE; PWS 13-125 CE PWS 550 PWS 550 (C99 0.) PWS 600 PWS 600 (C99 1.) PWS 9-125 CE; PWS 700 PWS 720; PWS 850 CE GWS 7-115 GWS 14-125 CE 115 125
Appropriate machines P.484

510 224

Protective guards without cover for grinding
GWS GWS GWS GWS GWS GWS 5-100 (375 0.) 6-100 (375 0.) 6-100 E (375 7.) 580 (375 0.) 670 (375 0.) 7-100 (C88 1.) 100

P. 485

P06 546
GWS 5-115 (376 2.) GWS 6-115 (375 0.; (375 7.; 375 9.) GWS 6-115 E (375 5.; 375 7.; 375 9.) GWS 580 (376 0.) GWS 780 C (377 56.) GWS 850 C (377 5.) GWS 7-115 (C88 1.; C88 2.) GWS 6-125 (375 1.) GWS 6-125 E (375 9.) GWS 850 C (377 7.; 377 9.) GWS 850 CE (377 7.; 377 9.) GWS 7-125 (C88 1.) GWS 7-115 (700 0.) GWS 7-125 (700 048) GWS 9-125 (701 0.) GWS 10-125 C (702 7.) GWS 10-125 CE Professional (703 7.) GWS 14-150 C (706 7.) GWS GWS GWS GWS 8-115 (H20 ) 8-115 Z (H31 0.) 1000 (H21 0.) 1400 (H24 0.)

P06 547

P06 548

115 125

510 101

510 281

150 115

510 364

GWS 8-125 (H27) GWS 10-125 (H21.) GWS 10-125 Z (H32 0.) GWS 11-125 CI (H22.) GWS 11-125 CIE (H23.) GWS 11-126 CIH (H39 1./B.) GWS 14-125 CI (H24.) GWS 14-125 CIE (H25.) GWS 14-125 CIT (H29.) GWS 15-125 CIEH (H30 3./D.) GWS 15-125 CIH (H30 2./C.) GWS 15-125 CITH (H30 4./E.) GWS 1400 Professional (H24.) PWS 10-125 CE (C47 0.) PWS 13-125 CE (C48 0.)

Appropriate machines P. 489

P06 549

Protective guards with cover for cut-off grinding
GWS 8-115 (820 ; H20 ) GWS 8-115 Z (H31 0.) GWS 1000 Professional (H23 ) GWS 8 GWS 14 Professional (821 829) GWS 8-125 (H27) GWS 10-125 (H21.) GWS 10-125 Z (H32 0.) GWS 11-125 CI (H22.) GWS 11-125 CIE (H23.) GWS 11-125 CIH H30 1./B.) GWS 14-125 CI (H24.) GWS 14-125 CIE (H25.) GWS 14-125 CIT (H29.) GWS 15-125 CIH (H30 2./C.) GWS 15-125 CIEH (H30 3./D.) GWS 15-125 CITH (H30 4./E.) GWS 1400 Professional (H24 ), PWS 10-125 CE (C47 0.) PWS 13-125 CE (C48 0.) GWS 14-150 CI (H26.) GWS 15-150 CIH (H30 5./F.) 115

P. 489

510 256

510 257

P06 550

P06 551

025 282

510 258

PWS 700-115; PWS 720-115 PWS 750-115 (164 0.) PWS 7-125 CE (C98 8.) PWS 8-125 CE (C99 B.) PWS 9-125 (C99 A.) PWS 720-125; PWS 750-125 (164 1.) GWS 24-300 GWS 24-300 J Professional 510 291

510 299

GWS 20-230 H/J/JH (850.) GWS 21-230 HV/JHV (852 ) GWS 22-230 H/JH (H82.) GWS 23-230/J (754 ) GWS 24-230 BX/JBX (864.) GWS 24-230 H (H54 1./L.) GWS 24-230 H/BV/JBV (854.) GWS 24-230 JH ( H54 M.) GWS 25-230/J (756 ) GWS 26-230 B (H56 3./K.) GWS 26-230 BV/JBV (856.) GWS 26-230 JBV (H56 5.) GWS 26-230 JH (H56 M.) GWS 230, 20-230/J (752 ) PWS 20-230/603 C59 V./W.) PWS 20-230/J (359.) PWS 1900 (359 0.)
484 | Cutting, Grinding and Brushing | Dust Extraction and Protective Guards
Dust extraction guards for dust-free sanding Protective guards for additional safety when grinding Note: Please verify with the operating instructions of the machine for more detailed use
Productive, clean and safe sanding with Bosch angle grinder and dust extraction guard
Dust extraction guards for sanding
With brush ring Suitable for dust-free sanding of paint, varnish, plastics and wood in conjunction with sanding plates and bre sanding sheets or with tungsten carbide grinding heads (not suitable for metals)
mb er Pa ck ag ing typ Pa e ck qu an tit y Mi nim um or de rq Ba ua nt rco ity 31 de 0.
Dust extraction guard with brush ring Tool-free xing Appropriate for GWS 8-115 (H20 ); GWS 8-115 Z (H31 0.); GWS 8-125 (H27); GWS 10-125 (H21.); GWS 10-125 Z (H32 0.); GWS 11-125 CI (H22.); GWS 11-125 CIE (H23.); GWS 11-125 CIH (H30 1./B.); GWS 14-125 CI (H24.); GWS 14-125 CIE (H25.); GWS 14-125 CIT (H29.); GWS 15-125 CIEH (H30 3./D.); GWS 15-125 CIH (H30 2./C.); GWS 15-125 CITH (H30 4./E.); GWS 1000 (H21.); GWS 1400 Professional (H24.); PWS 10-125 CE (C47 000/030); PWS 13-125 CE (C48 000)

C0a 375160 GAT 41.06

Dust extraction guard with brush ring Tool-free xing Appropriate for GWS 7-115 GWS 14-125 CE; GWS 7-115 (700 0.); GWS 9-125 (701 0.); GWS 10-125 C (702 7.); GWS 10-125 CE (702 7.); GWS 14 -125 C (704 7.); GWS 14-125 CE Professional (705 7.); PWS 6-100 (372 0.); PWS 6-115/PWS 620 (372 0.); PWS 10-125 CE PWS 13-125; PWS 600 (371 0.); PWS 700 (373 0.)

C0a 067911 GAT 29.62

Cutting, Grinding and Brushing | Dust Extraction and Protective Guards | 485
Dust extraction guard for sanding, with clamp tting Appropriate for GWS 7-115 GWS 14-125 CE Professional; PWS 6-115 (C99 2.; C99 3.; C99 4.); PWS 7-100 (C99 640); PWS 7-115 (C99 5.; C99 6.); PWS 7-125 (C99 7.; C99 8.); PWS 7-125 CE; PWS 8-125 CE; PWS 8-125 CE (C99 B.; C99 9.; C99 A.); PWS 9-125 CE; PWS 10-125 CE; PWS 13-125 CE; PWS 550; PWS 550 (C99 0.); PWS 600; PWS 600 (C99 1.); PWS 700; PWS 720; PWS 850 CE

281 C0a 272568 GAT 49.70

Replacement brush for 510 224

C0a 375177 GAT 12.38

Replacement brush for and 510 281

C0a 067904 GAT 19.47

Without cover for general grinding and sanding work EN/EC 60745
Protective guard Without cover for grinding with clamp tting, screw-type fastening Appropriate for GWS 5-100 (375 0.); GWS 6-100 (375 0.); GWS 6-100 E (375 7.); GWS 7-100 (C88 1.); GWS 580 (375 0.); GWS 670 Professional (375 0.)

619 PP0f 492744 GAT 6.25

Appropriate for GWS 5-115 (376 2.); GWS 6-115 (375 0.; 375 7.; 375 9.); GWS 6-115 E (375 5.; 375 7.; 375 9.); GWS 7-115 (C88 1.; C88 2.); GWS 580 (376 0.); GWS 780 C (377 56.); GWS 850 C Professional (377 5.)

619 PP0f 492751 GAT 6.25

Appropriate for GWS 6-125 (375 1.); GWS 6-125 E (375 9.); GWS 7-125 (C88 1.); GWS 850 C (377 7.; 377 9.); GWS 850 CE Professional (377 7.; 377 9.)

619 PP0f 492768 GAT 6.07

Protective guard without cover with easy-to-use adjustment and tool-free attachment Appropriate for GWS 7-115 Professional (700 0.)

102 P0f 062497 GAT 20.11

486 | Cutting, Grinding and Brushing | Dust Extraction and Protective Guards
Protective guard without cover with easy-to-use adjustment and tool-free attachment Appropriate for GWS 7-125 (700 048); GWS 9-125 (701 0.); GWS 10-125 C (702 7.); GWS 10-125 CE Professional (703 7.)

101 P0f 062480 GAT 20.11

Protective guard without cover with easy-to-use adjustment and tool-free attachment Appropriate for GWS 8-115 (H20 ); GWS 8-115 Z (H31 0.); GWS 1000 (H21 0.); GWS 1400 Professional (H24 0.)

364 P0f 364089 GAT 12.38

Protective guard without cover with easy-to-use adjustment and tool-free attachment Appropriate for GWS 8-125 (H27); GWS 10-125 (H21.); GWS 10-125 Z (H32 0.); GWS 11-125 CI (H22.); GWS 11-125 CIE (H23.); GWS 11-125 CIH (H39 1./B.); GWS 14-125 CI (H24.); GWS 14-125 CIE (H25.); GWS 14-125 CIT (H29.); GWS 15-125 CIEH (H30 3./D.); GWS 15-125 CIH (H30 2./C.); GWS 15-125 CITH (H30 4./E.); GWS 1400 Professional (H24.); PWS 10-125 CE (C47 0.); PWS 13-125 CE (C48 0.)

365 P0f 364096 GAT 14.19

Protective guard without cover with easy-to-use adjustment and tool-free attachment Appropriate for GWS 14-150 CI (H26 ); GWS 15-150 CIH Professional (H30 5./F.)

366 P0f 364102 GAT 21.31

Protective guard without cover for grinding Easy-to-use adjustment, tool-free attachment Appropriate for GWS 22-180 LVI (H90 D.); GWS 24-180 LVI (H92 F.); GWS 26-180 JBV Professional (H55 U.)

280 P0f 482547 GAT 26.55

Protective guard without cover for grinding Easy-to-use adjustment, tool-free attachment Appropriate for GWS 22-230 LVI (H91 D./C.); GWS 24-230 JBX (H64 4./R./T.); GWS 24-230 LVI (H93 F./H.); GWS 26-230 (H56 5.); GWS 26-230 BV (H56 S.); GWS 26-230 JBV Professional (H56 U.)

281 P0f 482554 GAT 28.80

Cutting, Grinding and Brushing | Dust Extraction and Protective Guards | 487
Protective guard Clamp with screw-type fastening, with coding Appropriate for GWS 20-180/H/JH (849.); GWS 21-180 HV/JHV (851.); GWS 22-180 H/JH (H81.); GWS 23-180/J (753.); GWS 24-180 BX/JBX (863.); GWS 24-180 H (H53 1.); GWS 24-180 H/BV/JBV (853.); GWS 24-180 JH (H53 M.); GWS 25-180/J (755.); GWS 26-180 B (H55 K.); GWS 26-180 BV/JBV (856.); GWS 26-180 H (H55 1.; H56 1./L.); GWS 26-180 JH (H55 M.); GWS 180/J, 20 -180/J Professional (751.)

297 C0a 542166 GAT 14.55

Protective guard Clamp with screw-type fastening, with coding Appropriate for GWS 20-230 H/J/JH (850.); GWS 21-230 HV/JHV (852 ); GWS 22-230 H/JH (H82.); GWS 23-230/J (754 ); GWS 24-230 BX/JBX (864.); GWS 24-230 H (H54 1./L.); GWS 24-230 H/BV/JBV (854.); GWS 24-230 JH ( H54 M.); GWS 25-230/J (756 ); GWS 26-230 B (H56 3./K.); GWS 26-230 BV/JBV (856.); GWS 26-230 JBV (H56 5.); GWS 26-230 JH (H56 M.); GWS 230, 20-230/J Professional (752 ); PWS 20-230/J (359.); PWS 20-230/1900 (C59 V./W.); PWS 1900 (359 0.)

299 C0a 542180 GAT 25.62

Cutting, Grinding and Brushing | Dust Extraction and Protective Guards | 489
Protective guard Clamp tting with coding and quick fastening Appropriate for GWS 20-230 H/J/JH (850.); GWS 21-230 HV/JHV (852 ); GWS 22-230 H/JH (H82.); GWS 23-230/J (754 ); GWS 24-230 BX/JBX (864.); GWS 24-230 H (H54 1./L.); GWS 24-230 H/BV/JBV (854.); GWS 24-230 JH ( H54 M.); GWS 25-230/J (756 ); GWS 26-230 B (H56 3./K.); GWS 26-230 BV/JBV (856.); GWS 26-230 JBV (H56 5.); GWS 26-230 JH (H56 M.); GWS 230, 20-230/J Professional (752 ); PWS 20-230/1900 (C59 V./W.); PWS 20-230/J (359.); PWS 1900 (359 0.)

300 C0a 542197 GAT 33.23

Protective guard with cover for cutting Tool-free xing Appropriate for PWS 700-115; PWS 720-115; PWS 750-115 (164 0.)

290 P0f 498357 GAT 7.32

Protective guard with cover for cutting Tool-free xing Appropriate for PWS 7-125 CE (C98 8.); PWS 8-125 CE (C99 B.); PWS 9-125 (C99 A.); PWS 720-125; PWS 750-125 (164 1.)

291 P0f 498425 GAT 7.32

Protective guard Clamp tting with coding and quick fastening Appropriate for GWS 24-300; GWS 24-300 J Professional

224 P0f 047180 GAT 82.33

490 | Cutting, Grinding and Brushing | Dust Extraction and Protective Guards
Protective guards and cutting guides for Bosch angle grinders
Clamping element set for small angle grinders
3-piece clamping element set for small angle grinders consisting of round nut (340 015), ange (703 084), two-hole spanner (950 043). Before manufacturing date 08/90

PC1c 049047 GAT 6.93

Cutting, Grinding and Brushing | Accessories for Angle Grinders | 491
Accessories for Bosch angle grinders
Locking nuts for angle grinders

Th ick ne ss mm

SDS-clic quick-locking nut M14 Appropriate for all angle grinders with M14 thread. (Available thread length protruding over thickest tool larger than 6 mm) manufactured in or after 08/90 Note: The disc must be centred at the supporting ange, not at the nut

031 C1a 033206 GAT 19.99

Round nut for bufng disc for clamping grinding discs with 115-150 mm diameter manufactured before 08/90 Appropriate for Polishers GPO 12; GPO 12 E Professional

PC1c 016384 GAT 3.50

Locking nut for clamping all discs with 115-230 mm diameter, manufactured after 08/90

P0b 052078 GAT 5.61

Locking nut before manufacturing date 1988, special cut-off grinder 1333 before 1990

PC1c 016391 GAT 7.42

Flange sets for clamping 300 mm diameter discs Appropriate for Slot Cutter GSF 100 A (367.); GWS 24-300; GWS 24-300 J Professional

P0b 056809 GAT 14.98

492 | Cutting, Grinding and Brushing | Accessories for Angle Grinders
Backing anges for angle grinders
Backing ange for M14 thread for clamping all discs with 115-150 mm diameter, manufactured after 08/90

PC1c 046947 GAT 6.74

Locking ange for special cut-off grinders 364. for clamping 300 mm diameter discs Appropriate for Slot Cutter GSF 100 A (367); GWS 24-300; GWS 24-300 J Professional

017 P0b 056823 GAT 50.51

Locking ange for clamping 300 mm diameter discs Appropriate for Slot Cutter GSF 100 A (367); Special Cut-Off Grinders (364.); GWS 24-300; GWS 24-300 J Professional

016 P0b 056816 GAT 33.31

Backing ange with locking nut M14 left, with marker groove Appropriate for Slot Cutter GSF 100 A Professional (367)

P0b 078146 GAT 3.23

Locking ange Appropriate for 333.

PC1c 024440 GAT 18.08

Backing ange for discs with 115/125 mm diameter Appropriate for PWS 700-115; PWS 720-115; PWS 750-115; PWS 720-125; PWS 750-125

498463 GAT 2.51

Cutting, Grinding and Brushing | Accessories for Angle Grinders | 493
Two-hole spanners for angle grinders
Two-hole spanner, bent at right angles Appropriate for cup wheels

PC1c 002356 GAT 7.53

Two-hole spanner, straight for clamping all discs on angle grinders

PC1c 016483 GAT 3.64

Two-hole spanner, straight for clamping all discs on two-hand angle grinders and straight grinders Appropriate for GGS 6 Professional

P0b 040891 GAT 4.42

Bow handles for angle grinders
Appropriate for all Bosch two-hand angle grinders, for left-handers and right-handers With safety device to prevent inadvertent release
Bow handle Appropriate for GWS 20-180; GWS 20-180 H; GWS 20-180 (J)H; GWS 20-230; GWS 20-230 (J)H; GWS 21-180 (J)HV; GWS 21-230 (J)HV; GWS 22-180 (J)H; GWS 22-230 (J)H; GWS 23-180; GWS 23-180 J; GWS 23-230; GWS 23-230 J; GWS 24-180 (J)BV; GWS 24-180 JH; GWS 24-230 (J)BV; GWS 24-230 (J)H; GWS 24-230 JBX; GWS 25-180; GWS 25-180 J; GWS 25-230; GWS 25-230 J; GWS 26-180 (J)BV; GWS 26-180 JH; GWS 26-230 (J)BV; GWS 26-230 JH; GWS 180; GWS 180 J; GWS 230 Professional; PWS; PWS 20-230; PWS 20-230 J; PWS 1900

P0b 048002 GAT 47.61

Bow handle Appropriate for GNS 14; GPO 12 E Professional

P0b 049108 GAT 71.29

494 | Cutting, Grinding and Brushing | Accessories for Angle Grinders
Handles for angle grinders
For left-handers and right-handers
Handle Appropriate for GUF 4-22 A Professional; PSF 22-A and all Bosch one-hand angle grinders and compact belt sanders with M10; PWS 6-13

Suitable for smoothing welded seams (steel), grinding, deburring, chamfering steel
Product properties x Bx Bx B30
Ordering information C1a C1a C1a 185721 GAT GAT GAT 4.90 4.90 4.90

80 120

45 x Bx Bx Bx B30

606 878

C0a C0a C0a C0a

181426 181433

GAX GAX GAX GAX

92.73 92.73 92.73 92.73

Rubber locking mechanism Suitable for clamping sanding sleeves
40 x B600 C1a 185684 GAT 10.27
502 | Cutting, Grinding and Brushing | Bosch Grinding Brush
Flap wheels for Bosch grinding brush
Flap wheels Inox-Forte: Suitable for deburring stainless steel Flap wheels: Suitable for removing light rust (rust lm), removing varnish or paint on wood, surface nishing for steel and matt nishing
Flap wheel Inox-Forte dia. 75 mm x 30 mm
642 C1a C1a C1a 189590 GAT GAT GAT 13.86 13.85 13.86
Flap wheel dia. 75 mm x 30 mm
C1a C1a C1a C1a GAT GAT GAT GAT 12.82 12.82 12.82 12.82
Fleece brush for Bosch grinding brush
Ideally suited to removing annealing colour on welded seams (stainless steel), surface nishing for steel and matt nishing, cleaning non-ferrous metals such as copper, brass and aluminium Suitable for removing light rust (rust lm), structuring wood
Fleece brush dia. 60 mm x 50 mm

C1a 185813 GAT 12.82

Cutting, Grinding and Brushing | Bosch Grinding Brush | 503
Power eece for Bosch grinding brush
Ideally suited to removing light rust (rust lm), removing varnish or paint on metal, removing annealing colour on welded seams (stainless steel), roughing (e.g. for adhesive contact points) Suitable for cleaning welded seams (steel and stainless steel), grinding steel, surface nishing for steel/matt nishing, cleaning non-ferrous metals such as copper, brass and aluminium, structuring wood

Grinding eece

626 C1a 185943 GAT 12.82
Hard grinding stone Aluminium oxide
Suitable for smoothing welded seams (steel), grinding, deburring, chamfering steel, sharpening
Grinding stone Aluminium oxide, hard, cylinder

645 C1a 189620 GAT 6.12

Felt disc and polishing agent for Bosch grinding brush

Di sc dia me ter mm

Polishing felt Suitable for polishing delicate surfaces

C1a 189644 GAT 6.33

504 | Cutting, Grinding and Brushing | Grinding Stones
Grinding stones for straight grinders and drills
Highest quality of grinding grit, bonding material and backing material Tools for safe and efcient grinding and deburring with straight grinders and drills

Best work results with Bosch grinding stones when deburring non-hardened or hardened steel
Grinding stones Aluminium oxide, for straight grinders and drills
Appropriate for all straight grinders with collets and for drills For non-hardened and hardened steel Shapes of stones: round (a), half-round (b), cylindrical (c), disc-shaped (d), tapered (e)
ts ha nk mm St rai gh ts ha nk Inc Gr h it
Di am ete rm m Le ng th mm
5-piece grinding stone set
6 (a) 6 (b) 6 (c) 6 (d) 6 (e) 286 C1d 004565 GAT 12.79
Grinding stone Cylindrical, hard

P0b 047814 GAT 5.94

Cutting, Grinding and Brushing | Grinding Stones | 505
ha nk mm St rai gh ts ha nk Inc Gr h it

St rai

Grinding stone Cylindrical, medium-hard
1/P0b P0b P0b 047777 GAT GAT GAT 3.33 3.11 3.33
Grinding stone Conical, medium-hard
6 1/014 P0b P0b GAT GAT 3.33 6.27
506 | Cutting, Grinding and Brushing | Bosch Straight Grinders
Accessories for Bosch straight grinders
Collets without locking nut

Di am ete rI nc h

Collet without locking nut Appropriate for GGS 27; GGS 27 C Professional

008 P0b 049023 GAT 10.52

Collet without locking nut Appropriate for GGS 27; GGS 27 C Professional; POF 500 A; POF 600 ACE

047 P1c 013505 GAT 9.05

1/P1c P1c GAT GAT 9.59 10.39

Collets with locking nut

Collet with locking nut Appropriate for GGS 7 C; GGS 27 L; GGS 27 LC; GGS 1212 Professional

082 P0b 031103 GAT 26.58

084 P0b 031110 GAT 33.18

086 P0b 031134 GAT 26.58

1/085 P0b 031127 GAT 26.58
1/083 P0b 032612 GAT 26.58
Cutting, Grinding and Brushing | Bosch Straight Grinders | 507
Collet with locking nut Appropriate for GGS 16 Professional
040 P0b P0b P0b 026048 GAT GAT GAT 35.64 33.74 33.96
Toolholder Appropriate for GGS 27 L, Type 1212; GGS 7 C Professional
047 P0f 024600 GAT 166.79
Spanner Appropriate for GGS 16 Professional
PC1c PC1c GAT GAT 4.93 2.45
Dressing stone Appropriate for GGS 6 S; GGS 7 C; GGS 16; GGS 27; GGS 27 C; GGS 27 L; GGS 27 LC Professional; Type 1207; Type 1210; Type 1212

P0b 024532 GAT 3.58

Round nut for level discs Appropriate for GGS 6 Professional

P0b 048767 GAT 20.93

 

Tags

EW1001F 86 XA LTC0430 1000HA XP Motorized SRT 8700 CDX-R6550 GR-213 Review UX-H100 V-339 Series VGN-NR32s S 4000 ED HK3300 DV 2000 VGN-FE31M KDL-55X4500 EN8400 BH-601 ER-A320 CCG432W Workstation Dinosaur Digs FW2017 Splendid ERG29750 DV8631V Singer 35-1 PIN 570 High T SP7000 V3-4 Gdvdr320hdmib XVN322SUS-xv-n322 Optoma H27 Printer T3TKS KX-TG8323E S3650 FA-30 H5400 NWZ-A728B Croma AL1706 Dryer EL-5020 DP42746 Beocenter 2200 MDR-ED12LP PD116 DSX-80 447N SB DVR5100 PDP-S06-LR GC4411 CDC-645 Motorola 120T Mover SE 42PG21R DAV-DZ556KB P4B266SE Mk IV DV 4500 MV5IMC SH12ZSG KX-TG6445 52850 KX-TG5110 Dvdr3597H All-IN-ONE Samsung ES15 EXS2080 Coolpix S230 EL-733A Webconnect JET DMC 250 Laserjet 4700 6 Plus HDC-TM20 EW914S Dimage XG IST D Deskjet 5943 Compact III GR-332SF KX-F155 105 SX SRS-D313 Ist DL WS-32Z409T K-SC 150 Sabre PNA 4110 Description CS 20 20V500T DV-ACV52 WD-1250ERD Thinkpad T60P UN32C5000QF Singer 9940

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101