Pots & Pans Suspension Rack - Project 11

Shopping list:

Using Meranti wood 2 lengths of 32mm x 20mm thick x 3000mm long 40mm chipboard screws 12 hooks (50mm) to hang pots 4m dcor chain depending how high your ceiling is 2 big cup hooks Varnish

Tool list:

Bosch PBS 7A belt sander Bosch Palm router with round over bit Bosch PDO Multi detector Bosch PSR 10,8 cordless screw driver Bosch Drill bit accessory set x 60 Bosch PSR 14,4 Li-2 cordless drill/driver Bosch PSR 14,4 Li cordless drill/driver

Sanding | Polishing

Coated Abrasives | Polishing Accessories for Random Orbit Sanders for Delta Sanders for Multi-Sanders for Orbital Sanders for Belt Sanders for Angle Grinders for Drills Hand Sanding Rolls Brushes for Drills for Angle Grinders and Straight Grinders Flap Wheels for Drills Grinding Stones
05-0833_DIY_05_Schleifen_Polieren_GB.indd 157

| | | | | | | | | | | |

221 221

| 227 | 231 | 232

21.08.2007 10:58:16 Uhr
158 | Sanding/Polishing | Overview

DIY Accessories

A range of coated abrasives for all manufacturers power tools.
Surface quality Material removal rate Suitability for shapes and radii Suitability for corners and radii

Machines 100%

Application
Random Orbit Sanders For fine sanding on even and curved surfaces.

0% 100%

50% Delta Sanders For perfect sanding into the smallest corners.
Multi-Sanders For smaller, even surfaces into the smallest corners.
0% 100% Orbital Sanders For large and perfect surfaces and the finest finishing into corners.
Belt Sanders For the highest material removal rate on large surfaces.
Compact Belt Sanders For high material removal rates on small and hardto-reach surfaces.
50% Angle Grinders For fast and coarse material removal.
50% Drill For smaller, even surfaces.
05-0833_DIY_05_Schleifen_Polieren_GB.indd 158

21.08.2007 10:58:25 Uhr

Sanding/Polishing | Overview | 159

White Quality

Paint Varnish Roughcast Coated abrasive range

Red Quality

Hardwood Softwood Chipboard Construction boards

Blue Quality

Black Quality
Stone Glass Perspex Car paint

P 40 240

P 40 400

P 40 180

P 40 150

Fibre Flaps 40 120

P 40 320

P 80 1200

P 80 800
05-0833_DIY_05_Schleifen_Polieren_GB.indd 159

21.08.2007 10:58:26 Uhr

160 | Sanding/Polishing | Overview
The right coated abrasive for any application.
Material Application Grit

Sanding paint.

coarse

Paint Varnish Roughcast

Sanding primer (e.g. removing brush strokes, paint drips and stains).

medium

For finishing of primers prior to painting.

180 240

For pre-sanding, e.g. of rough, uneven beams and boards.
For surface sanding and sanding down of surface blemishes.
For finishing and fine sanding of wood.

320 400

For deburring and derusting as well as sanding down.

24 (fibre) 36 60

For deburring and cleaning
For finishing/bringing out the grain.

For pre-sanding.

For shaping and edge breaking. Stone Glass Perspex Car paint For finishing and shaping.
For gloss sanding and for rounding off edges.

very fine

05-0833_DIY_05_Schleifen_Polieren_GB.indd 160

21.08.2007 10:58:40 Uhr

Sanding/Polishing | Overview | 161
The optimum sanding sheet for any application.
Fib reg las sr W ein eld for ed ce dp se las am tic s
sh ee tv er Ba sio ck ns ing ma te ria l Bo nd ing

Gr it ty pe Pa int

nis h Fil ler Ro ug hc as W t oo d Ha rd wo od So ftw oo d Pl yw oo d Ch ipb oa rd Co ns tru cti Me on ta l bo ar St ds ain les ss Al um te el ini um St ee l Ca st iro n St ee lp lat Pe e rsp ex

Sa nd ing

Qu ali ty
Aluminium oxide with calcium stearate active agent coating

C-paper

Fully synthetic resin
Random orbit sander disc Triangular sanding sheet Orbital sanding sheet
half open half open half open E-paper Fully synthetic resin half open half open half open

Aluminium oxide

Multi-sanding sheet Angle sanding sheet Drill sanding sheet Rolls (Top)
thick Fully synthetic resin

Sanding belt

X-fabric
Hand sanding sheet Rolls (standard)

B/Dpaper

Glue/ glue

Hand sanding sheet (Eco)

suitable,

relatively suitable

05-0833_DIY_05_Schleifen_Polieren_GB.indd 161

21.08.2007 10:58:41 Uhr

162 | Sanding/Polishing | Overview
Gr it t Pa ype in Va t rn Fil ish ler Ro ug W hca oo st Ha d rd wo So ftw od o Pl yw od Ch ood ip Co boa ns rd Me truc tio ta nb St l ain oa rd Al less s um ste St iniu el ee m Ca l st St iron ee St l pla on te Ma e rb Gr le an Gl ite as Pe s rs Po pex ly Fib mer s( re W glas Cori eld s r a ed ein n, V se forc aric am ed o pla r) sti cs

Zirconia alumina

Fibre disc
Fully V8-fi- synthebre tic resin Fully V8-fi- synthebre tic resin Fully YX-fa- synthebric tic resin Fully YX-fa- synthebric tic resin JF-fa- Natural bric gum Fully YX-fa- synthebric tic resin JF-fa- Natural bric gum Natural gum

closed

Flap disc
Aluminium oxide Aluminium oxide Zirconia alumina
Sanding sleeve Hand sanding sheet Hand sanding sheet (Eco)

thick spread

Aluminium oxide Aluminium oxide
B, C, E paper depending on grit size
05-0833_DIY_05_Schleifen_Polieren_GB.indd 162
Sanding/Polishing | Overview | 163
Which machine needs which sanding sheet?

Random Orbit Sanders

les les les mm Ty p a.
Milwaukee PRS 125E ROS 150E Peugeot PAE 115 PRX 150E Ryobi ERO 2412V Skil Stayer LRT 115 LRT 150 Wegoma LRE 84H RT 118N RTE (1)46L RX 91C 8 6
Bosch GEX 125A/AC GEX 150 Turbo PEX 11A/AE PEX 12A/AE PEX 15 AE PEX 115 PEX 125A PEX 125 AE PEX 220A PEX 270A/AE PEX 300A/E PEX 400 AE PEX 420 AE AEG EX 400 EX 450 EXE 400 EXE 460 (125) EXE 460 ROS 150E Atlas Copco TEX 150 Black & Decker BD 190/S/D BD 190/S/E KA 190 / S / E KA 198GT XTA 90EK DeWalt D 26453 DW 423 DW 443 D 26410 Einhell BES 125 EX 125 125/8/8 6

Elu ES 55E ES 56E/EK Felisatti TP 521/(E)AS TP 522/AS/CE Flex XS 712A X/XS 1107VE Hitachi SAY 150A SV 13YA SV 13YB TSV 13Y Kress 900 MPS 900 HEX CPS 6115-1/E CPS 6125-1/E CPS 6125E Set HEX 1385E HEX 6385E X/XS 1107VE CPS 6125E Set Makita BO 5000 BO 5010 BO 5021(K) Metabo SXE 125 SXE 425 SXE 425XL SXE 450 DUO Milwaukee PRS 125E ROS 150E
05-0833_DIY_05_Schleifen_Polieren_GB.indd 163

21.08.2007 10:58:42 Uhr

164 | Sanding/Polishing | Overview

Delta Sanders

les les ho ho ho mm Ty p a.
Metabo DSE 130 DSE 170 DSE 300 / Intec Skil 6 6
Bosch GDA 280E PDA 100 PDA 120 E PDA 180 / E PDA 240 E AEG DSE 220 DSE 260 Black & Decker KA 511EKA VP 510 KA 6
DeWalt D 26430 Einhell BDS 180 Fein MOX 6-24/-25 MSX 315 MSX 636-1 / -2 MSXE 636-2 Makita BO 4561

Multi-Sanders

m sm ho les

Sh e dim et en s

Bosch PSM 80 PSM 160A PSM 1400 Ventaro Prio Black & Decker KA 150K KA 200FK KA 220 Multi KA 220E Multi KA 250 K Multi KA 260GT KA 260GTK Skil 7208 (Octo) 7210 (Fox) 7240 Fox 7370 Fox 102 x 62/x x x x 95 x x x x x x x 102 x 62/x 62/x 62/x 62/11
05-0833_DIY_05_Schleifen_Polieren_GB.indd 164
Sanding/Polishing | Overview | 165

Orbital Sanders

s ion s ion les les ho

ee mm t di

Bosch GSS 23/AE GSS 23AE GSS 140A GSS 230A / AE GSS 280A / AE GSS 280AE PSS 23 PSS 23/A PSS 23A / AE PSS 23AE PSS 28 AE PSS 180 A PSS 200A PSS 220AC PSS 230 PSS 240A / AE PSS 250AE PSS 280 AE PSS 300AE AEG VS 230/E VS/E 230 VS/E 260 VSS / E260 Atlas Copco VSE 230 VSE/VSS 22 VSSE 288 VSS/VSSE 20 VS/VSE 280 Black & Decker BD 175 BD 273 BD/DN 180E CD 400 DN 41AE DN 180E KA 175 KA 180E KA 185 / E KA 186 / E KA 196 KA 197E KA 197EKA KA 197KA 93 x x x x x x x x x x x x x x x x x clamped clamped clamped clamped clamped clamped Velcro clamped clamped Velcro clamped Velcro clamped Velcro clamped Velcro clamped 115 x x x x x x x Velcro clamped Velcro clamped Velcro clamped clamped 93 x x x x 8 clamped Velcro Velcro clamped 93 x x x x x x x x x x x x x x x x x x x x x x x x x clamped Velcro Velcro, ext. SP clamped Velcro Velcro clamped Velcro clamped Velcro clamped Velcro clamped Velcro Velcro clamped clamped Velcro clamped Velcro clamped Velcro clamped Velcro clamped

Sh ee td im en sio ns

6 holes. For Black & Decker, Bosch, Makita, Metabo, Skil,.
93 Velcro-type backing 93

256 055

256 056

256 057

256 058

256 059

256 060

256 061

05-0833_DIY_05_Schleifen_Polieren_GB.indd 179

21.08.2007 10:59:25 Uhr

180 | Sanding/Polishing | Coated Abrasives/Polishing Accessories
Sanding sheets for delta sanders, red quality
n Good material removal rate, long lifetime n For universal use with many machine models n Also suitable for corners smaller than 90 n Aluminium oxide on fully synthetic resin Wood Hardwood Chipboard Metal
bond and E-paper. Suitable for wood (also hardwood), chipboard and metal

256 062

256 063

256 064

256 065

256 066

256 067

256 068

256 069

256 070

6 holes. For AEG, Kress,.

256 071

256 072

256 073

256 074

256 304

256 075
05-0833_DIY_05_Schleifen_Polieren_GB.indd 180

21.08.2007 10:59:29 Uhr

Sanding/Polishing | Coated Abrasives/Polishing Accessories | 181
Non-punched. For Black & Decker, Fein,.

256 076

256 077

256 078

256 079

256 303

256 080
Non-punched. Sanding sheets for sanding finger on delta sanders For Bosch, Skil,

256 081

32 Velcro-type backing 32

256 082

256 083

256 084

256 085

256 086

05-0833_DIY_05_Schleifen_Polieren_GB.indd 181

21.08.2007 10:59:34 Uhr

182 | Sanding/Polishing | Coated Abrasives/Polishing Accessories
Sanding sheets for multi-sanders, white quality
High-quality universal sanding sheets for fast and fine sanding of large surfaces and small corners.
n Good material removal rate and long lifetime. Paint Varnish Filler and roughcast
For universal use with many machine models
n Aluminium oxide coated with stearate on
fully synthetic resin bond and C-paper, reduces clogging when sanding paint off surfaces. Suitable for paint, varnish, filler and roughcast
Sa les pa ck ag De eq sp ty at ch pa ck ag eq ty
11 holes. For Bosch PSM, Prio and Ventaro, Skil Octo,.

102 x 62/93

256 093
102 x 62/93 Velcro-type backing 102 x 62/93

256 094

256 095

x x x 180

256 096

256 097

Sanding sheets for multi-sanders, red quality
n Good material removal rate and long lifetime. Wood (also hardwood) Chipboard Metal
n Aluminium oxide on fully synthetic resin

bond and E-paper.Suitable for wood (also hardwood), chipboard and metal

256 098

256 099
05-0833_DIY_05_Schleifen_Polieren_GB.indd 182

21.08.2007 10:59:37 Uhr

Sanding/Polishing | Coated Abrasives/Polishing Accessories | 183

256 100

256 101

x x x x 180

256 102

256 103

Cleaning fleece + additional sheet for multi-sanders from Bosch, Skil
For light sanding, cleaning and modelling of wood, paint and metal.

medium/fine

256 088
4 holes. For Black & Decker, Mouse

95 x 135

256 104

256 105

256 106

256 107

256 108
05-0833_DIY_05_Schleifen_Polieren_GB.indd 183

21.08.2007 10:59:47 Uhr

184 | Sanding/Polishing | Coated Abrasives/Polishing Accessories

8 holes. For Skil Fox,.

93 x 185 Velcro-type backing 93 x 185

256 109

256 110

93 x 185

256 111

256 112

Non-punched. For Skil Fox, Octo,.

54 x 54

256 113

256 114

256 115

256 116

8 holes. For Black & Decker

100 x 171

256 117

256 118

256 119

256 120

256 121

256 122

05-0833_DIY_05_Schleifen_Polieren_GB.indd 184

21.08.2007 10:59:52 Uhr

Sanding/Polishing | Coated Abrasives/Polishing Accessories | 185
Sanding sheets for orbital sanders, white quality
High-quality universal sanding sheets for fast and fine sanding on flat surfaces.
n Good material removal rate and long lifetime n For universal use with many machine models n Aluminium oxide coated with stearate on fully Paint Varnish Filler Roughcast

256 123

256 124

256 125

256 126

256 127

256 128

256 129

05-0833_DIY_05_Schleifen_Polieren_GB.indd 185

21.08.2007 10:59:59 Uhr

186 | Sanding/Polishing | Coated Abrasives/Polishing Accessories

n High material removal rate n Aluminium oxide on fully synthetic resin Wood Hardwood Chipboard Metal
bond and X-fabric. Suitable for wood (also hardwood), chipboard and metal

nu mb er

40 x 303

256 182

256 183

256 184

x x x 120

256 185

256 186
05-0833_DIY_05_Schleifen_Polieren_GB.indd 189

21.08.2007 11:00:14 Uhr

190 | Sanding/Polishing | Coated Abrasives/Polishing Accessories
Sanding belts for belt sanders, red quality
Sand large surfaces fast. Remove material powerfully.
n High material removal rate and long lifetime n For universal use with many machine models n Aluminium oxide on fully synthetic resin Chipboard Metal Wood Hardwood

For Bosch,

60 x 400

256 187

256 188

256 189

256 190

x x x 100

256 191

256 192

For Skil,

63 x 406

256 193

256 305

256 194

256 195

256 196

256 197

For AEG, Black & Decker, Kress, Metabo,

65 x 410

256 198

256 199

256 200
05-0833_DIY_05_Schleifen_Polieren_GB.indd 190

21.08.2007 11:00:19 Uhr

Sanding/Polishing | Coated Abrasives/Polishing Accessories | 191

256 201

256 202

256 203

For Black & Decker, Bosch, Makita, Skil,

75 x 457

256 204

256 205

256 206

256 207

256 208

256 209

For Black & Decker

75 x 508

256 210

256 211

256 212

256 213

256 214

256 215

For Black & Decker, Bosch, Makita, Metabo, Skil,

75 x 533

256 216

256 217

256 218

256 219

256 220

256 221

05-0833_DIY_05_Schleifen_Polieren_GB.indd 191

21.08.2007 11:00:25 Uhr

192 | Sanding/Polishing | Coated Abrasives/Polishing Accessories
For AEG, DeWalt, Festo, Ryobi

100 x 560

256 222

256 223

256 224
For Bosch, Hitachi, Makita, Ryobi,

100 x 610

256 225

256 226

256 227

For Peugeot, Skil,

102 x 552

256 231

256 232

256 233

For Festo/Festool, Hitachi, Metabo,

105 x 620

256 228

256 229

256 230
05-0833_DIY_05_Schleifen_Polieren_GB.indd 192

21.08.2007 11:00:26 Uhr

Sanding/Polishing | Coated Abrasives/Polishing Accessories | 193
Sanding belts for Black & Decker Powerfile

Remove material powerfully and quickly in tight spaces and hard-to-reach areas.
Wood Hardwood Chipboard Metal

6 x 451

256 234

256 235

256 236

13 x 451

256 237

256 238

256 239

256 240

256 241

256 242

05-0833_DIY_05_Schleifen_Polieren_GB.indd 193

21.08.2007 11:00:27 Uhr

194 | Sanding/Polishing | Coated Abrasives/Polishing Accessories
Fibre sanding discs for angle grinders, aluminium oxide
Applications range from fine through to coarse material removal, deburring work and rust removal.
n High material removal rate and long lifetime n For universal use with all machine models n Aluminium oxide on fully synthetic resin bond Paint Wood Structural steel Aluminium Cast iron

and V8 volcanic fibre.

n In self-service display pack

Di am dis ete cm ro m f

Di am bo ete re r mm of

256 243

256 244

256 245

256 246

256 247

256 248

256 249

256 250

256 251

256 252

x x x x x x 100

256 253

256 254

256 255
05-0833_DIY_05_Schleifen_Polieren_GB.indd 194

21.08.2007 11:00:39 Uhr

Sanding/Polishing | Coated Abrasives/Polishing Accessories | 195
Fibre sanding discs for clamping on a rubber backing pad. For working on all different kinds of materials. Applications range from fine to coarse sanding, material removal, deburring and de-rusting.
n Aluminium oxide coated abrasive n Non-packaged Paint Wood Structural steel Aluminium Cast iron
For fibre sanding discs where the sales package quantity=1, the price refers to a single sheet. The minimum order quantity, however, is 50 sheets (a pack), the increment of the order quantity is a multiple of this.

605 464

607 249

605 466

605 467

605 468

605 469

605 474

607 250

605 476

605 477

605 478

605 479

605 484

607 251

605 486

605 487
05-0833_DIY_05_Schleifen_Polieren_GB.indd 195

21.08.2007 11:00:47 Uhr

196 | Sanding/Polishing | Coated Abrasives/Polishing Accessories

605 488

605 489

605 490

607 252

605 492

605 493

605 494

605 495
Fibre sanding discs for angle grinders, zirconia
Fibre sanding discs for clamping on a rubber backing pad. For working on all different kinds of materials. Applications range from fine to coarse sanding, material removal, deburring and de-rusting. Fibre sanding discs with zirconia offer a longer lifetime and are particularly suitable for INOX applications.
n Zirconia coated abrasive n Non-packaged Aluminium Cast iron Inox Alloyed steel Structural steel

607 725

607 254

606 727

05-0833_DIY_05_Schleifen_Polieren_GB.indd 196

Ba rc o

21.08.2007 11:00:50 Uhr
Sanding/Polishing | Coated Abrasives/Polishing Accessories | 197

606 728

606 729

606 730

606 731

607 255

606 733

606 734

606 735

606 736

606 740

607 256

606 742

606 743

606 744

606 745

606 746

607 257

606 748

606 749

606 750

606 751

05-0833_DIY_05_Schleifen_Polieren_GB.indd 197

21.08.2007 11:00:55 Uhr

198 | Sanding/Polishing | Coated Abrasives/Polishing Accessories
Sanding plates for angle grinders, clamping system
High temperature resistant, low vibration running, break-resistant.

256 258

256 257

256 256

Paper sanding sheets for angle grinders, red quality, Velcro-type backing
Particularly suitable for sanding all types of wood, chipboard, construction boards and metal.
n For backing pads with Velcro-type fastening All types of wood Chipboard Construction boards Metal

system

n Excellent lifetime with very good price/per-

formance ratio

bond for high and fast material removal
n Non-punched n In self-service display pack

21.08.2007 11:00:56 Uhr

256 259

256 260

256 261
05-0833_DIY_05_Schleifen_Polieren_GB.indd 198
Sanding/Polishing | Coated Abrasives/Polishing Accessories | 199
Paper sanding sheets for angle grinders, non-punched, Velcro-type backing

Highly tear-resistant cotton fabric (type YX). Zirconia with fully synthetic resin bond. Glass-fibre backing plate, straight version

607 322

607 323

607 324

607 325

607 326

05-0833_DIY_05_Schleifen_Polieren_GB.indd 202

21.08.2007 11:01:18 Uhr

Sanding/Polishing | Coated Abrasives/Polishing Accessories | 203

607 327

607 328

607 329

607 330

607 331

607 332

607 333

Highly tear-resistant cotton fabric (type YX). Zirconia with fully synthetic resin bond. Glass-fibre backing plate, bomb-shaped

606 713

606 714

606 715

605 450

605 451

605 452

607 319

606 922

606 923

606 924

607 320

606 737

606 738

606 739

607 321

05-0833_DIY_05_Schleifen_Polieren_GB.indd 203

21.08.2007 11:01:21 Uhr

204 | Sanding/Polishing | Coated Abrasives/Polishing Accessories
Highly tear-resistant cotton fabric (type YX). Zirconia with fully synthetic resin bond. Plastic backing plate, straight version.

607 334

607 335

607 336

607 337

607 338

607 339

607 340

607 341

607 342

607 343

607 344

607 345
05-0833_DIY_05_Schleifen_Polieren_GB.indd 204

21.08.2007 11:01:22 Uhr

Sanding/Polishing | Coated Abrasives/Polishing Accessories | 205
Paper sanding sheets for drills, clamping system
n For backing pad, clamped with washer and All types of wood Chipboard Construction boards Metal
n Aluminium oxide with fully synthetic resin

n Excellent lifetime

256 273

256 274

256 275

256 276

256 277

2 x x x x x x x x 80

256 278

256 279

05-0833_DIY_05_Schleifen_Polieren_GB.indd 205

21.08.2007 11:01:24 Uhr

206 | Sanding/Polishing | Coated Abrasives/Polishing Accessories
Paper sanding sheets for drills, non-punched, Velcro-type backing
n Excellent lifetime with very good price/

performance ratio

Sanding plates for drills
Backing pad for sanding paper with dia. 125 mm. For clamping or with Velcro-type fastening system.
n Straight shank dia. 8 mm.
Di am sh ete an r k m of m

21.08.2007 11:01:28 Uhr

Sy ste m

Velcro

256 280

Clamping

256 281
05-0833_DIY_05_Schleifen_Polieren_GB.indd 206
Sanding/Polishing | Coated Abrasives/Polishing Accessories | 207
Lambswool bonnet for drills, clamped
n For use with polishing sponge or only rubber Varnish Metal Glass / Perspex Brass Copper

Wire wheels for drills - Crimped wire, brass-coated
Perfectly suited to cleaning work, e.g. removing paint, rust, scale, crusts or burr with effective results. Additional advantage is the corrosion protection provided by the brasscoated wire.
Non-ferrous metal Brass Copper Aluminium Stainless steel
x. rp m Sh an kd iam et Br er us mm hw idt hm Sa m les pa ck ag De eq sp ty at ch pa ck ag eq ty

256 519

256 529
Wood structuring brush for drills - Crimped wire, brass-coated
Especially suitable for structuring wood.
Sh an kd iam et Br er us mm hw idt hm Sa m les pa ck ag De eq sp ty at ch pa ck ag eq ty

21.08.2007 11:02:29 Uhr

256 541
05-0833_DIY_05_Schleifen_Polieren_GB.indd 224
Sanding/Polishing | Brushes | 225
Wire wheel for drills - Knotted wire
Aggressive tool for heavy duty cleaning work. Ideal for working in hard-to-reach areas. Range of applications: removal of heavy rust, removal of varnish/paint on metal, cleaning welded seams (steel), deslagging.

256 533

Wire wheels for drills - Nylon wire with aluminium oxide coated abrasive K80
Perfectly suited to stripping varnish/paint on wood and metal, removing annealing colour on welded seams (stainless steel) and light rust, cleaning non-ferrous metals, structuring wood. The lining of this brush adapts perfectly to the contours of the workpiece, without severely altering the surface. New sanding grit is repeatedly released, so that the material removal rate remains constant.
Wood Stainless steel Non-ferrous metals
Di am et er mm W ire th ick ne ss mm Sp ee d, ma x. rp m Sh an kd iam et er mm Br us hw idt hm Sa m les pa ck ag De eq sp ty at ch pa ck ag eq ty

21.08.2007 11:02:40 Uhr

256 535

256 537

05-0833_DIY_05_Schleifen_Polieren_GB.indd 225
226 | Sanding/Polishing | Brushes
Flap brush for drills - Nylon wire with aluminium oxide coated abrasive K80
Elastic, for fine surface sanding and structuring wood. For stripping varnish/paint on wood and metal, removing annealing colour on welded seams (stainless steel) and light rust, cleaning non-ferrous metals. The lining of this brush adapts perfectly to the contours of the workpiece, without severely altering the surface. New sanding grit is repeatedly released, so that the material removal rate remains constant.
x. rp m Sh an kd iam et er mm Br us hw idt hm Sa m les pa ck ag De eq sp ty at ch pa ck ag eq ty

256 543

Pencil brush for drills - Crimped wire
For removing burr, rust, slag, scale, surplus rubber, combustion residues and other forms of dirt in hard-to-reach areas and inner surfaces. Range of applications: roughing, deburring, paint stripping, deslagging, descaling, matt sanding and cleaning.

Steel Metal

x. rp m Sh an kd iam et er mm Sa les pa ck ag eq ty De sp at ch pa ck ag eq ty

256 538

05-0833_DIY_05_Schleifen_Polieren_GB.indd 226

21.08.2007 11:02:48 Uhr

Sanding/Polishing | Brushes | 227
Pencil brush for drills - Nylon wire with aluminium oxide coated abrasive K80
Range of applications: paint stripping, removing dust, smoothing, matt sanding, cleaning, structuring wood in hard-to-reach areas and inner surfaces. The lining of this brush adapts perfectly to the contours of the workpiece, without considerably altering the surface. New sanding grit is repeatedly released, so that the material removal rate remains constant.

256 540

Wire cup brush for angle grinders and straight grinders - Crimped wire
Brushes for a wide range of applications. Ideal for medium duty work on surfaces, e.g. removing paint, de-rusting, cleaning of shuttering boards and facings, deburring, descaling, roughing, matt sanding.

Metal Steel

Th re a

256 502

05-0833_DIY_05_Schleifen_Polieren_GB.indd 227

21.08.2007 11:02:57 Uhr

228 | Sanding/Polishing | Brushes
Wire cup brush for angle grinders and straight grinders - Crimped wire, brass-coated

256 500

Wire cup brushes for angle grinders and straight grinders - Knotted wire, brass-coated
Aggressive tool for heavy duty cleaning work on smooth surfaces.

256 503

256 506

256 508

05-0833_DIY_05_Schleifen_Polieren_GB.indd 228

21.08.2007 11:03:05 Uhr

Sanding/Polishing | Brushes | 229
Wire cup brush for angle grinders and straight grinders - Crimped wire, stainless steel
Suitable for removal of annealing colour on welded seams (stainless steel). Suitable for cleaning welded seams (stainless steel), cleaning non-ferrous metals, brass, copper and aluminium.

256 501

Wire cup brush for angle grinders and straight grinders - Knotted wire, stainless steel
Aggressive tool for heavy duty cleaning work on smooth surfaces. Ideally suited to cleaning welded seams (stainless steel).

256 504

05-0833_DIY_05_Schleifen_Polieren_GB.indd 229

21.08.2007 11:03:14 Uhr

230 | Sanding/Polishing | Brushes
Wire wheel for angle grinders and straight grinders - Knotted wire
Brushes for extreme use with high circumferential speeds. Range of applications: deburring, paint stripping, removing rust, deslagging, descaling and cleaning.

256 512

Wire wheel for angle grinders and straight grinders - Knotted wire, stainless steel
Brush for extreme use with high circumferential speeds. Suitable for removal of annealing colour on welded seams (stainless steel). Suitable for cleaning welded seams (stainless steel), cleaning non-ferrous metals, brass, copper and aluminium.

21.08.2007 11:03:21 Uhr

256 509
05-0833_DIY_05_Schleifen_Polieren_GB.indd 230
Sanding/Polishing | Brushes | 231
Tapered brush for angle grinders and straight grinders - Knotted wire
Versatile use for heavy duty cleaning work. Ideal for working on hard-to-reach areas due to its conical shape. Cleaning plugboards. Range of applications: deburring, paint stripping, removing rust, deslagging, descaling and cleaning.

256 511

Flap wheel for drills
For universal application in wood, metal, paint and plastic. For fine surface finishing.
n Particularly suitable for surface finishing and Wood Metal Plastic
smoothing down, deburring and structuring edges.
bond on fabric for faster material removal.
d, ma x. Sa rp m les pa ck ag De eq sp ty at ch pa ck ag eq ty
Di am et er mm Fla ph eig ht mm Sh an kd iam et er mm Gr it

21.08.2007 11:03:29 Uhr

256 282

256 283

256 284

256 285

Flap wheel fleece

256 286

256 287
05-0833_DIY_05_Schleifen_Polieren_GB.indd 231
232 | Sanding/Polishing | Grinding Stones

Grinding stones

Grinding stones for safe, accurate grinding, sharpening and deburring with the drill and the straight grinder. Working on hardened and non-hardened steel.
n Straight shank 6 mm n High-quality sanding grit, bonding material Steel

and backing material

n Also suitable for straight grinders n In the following versions: round, half-round,
cylindrical, disc, tapered
n Also available as a set
Sh an kd iam et er mm W or kin gl en gt hm Gr m it