Grinding discs (metal and Inox)
Application ranges Aluminium alloy Brass, bronze Cast iron Copper Non-alloyed and alloyed structural steel Sheet steel Stainless and acid-resistant steel Stainless steel sheet Structural steel with high stability Tool steel Welded seams especially suitable suitable relatively suitable Metal INOX
Cutting discs (metal and Inox)
Application ranges Grit Disc thickness Aluminium alloy Brass, bronze Cast iron Copper Non-alloyed and alloyed structural steel Square-edged stainless steel proles Square-edged steel proles Stainless and acid-resistant steel Structural steel with high stability Tool steel especially suitable suitable relatively suitable Metal P 46 1.6 mm P 2.5 3.5 mm INOX P 30 2.5 3.0 mm P 46 1.6 2.0 mm P 60 1.0 mm

Cutting discs (stone)

Application ranges Aerated concrete Asphalt Brick Clay pipes Clinker Concrete Ductile pipes Exposed concrete Granite Limestone Marble Roong tiles Slag stone Slate Terrazzo Tiles suitable relatively suitable Stone
470 | Cutting, Grinding and Brushing | 3-in-1 Disc
No more disc changes! Cutting, grinding and nishing with only one disc
The advantages of the 3-in-1 disc speak for themselves: The right disc is always ready to hand, without the need for disc changes Efcient working due to time and cost saving Easy cutting of proles, pipes and sheets made of metal and Inox Safe grinding with a 2.5 mm thin disc, ideal for hard-to-reach areas Less heat discolourations when grinding
Application and angle effect Cutting Grinding Finishing
Easy, fast and exact cutting
Clean grinding with ne results. Ideal for light grinding work
Fine nish. The ne grit produces a cleaner result than with commercially available grinding discs
Maximum work safety thanks to the optimum three-layer reinforcement of the disc. Manufactured in accordance with OSA guideline. Meets EN 12413

3-in-1 Disc

Cutting, grinding and nishing with one disc Suitable for metal and Inox Appropriate for hand-held angle grinders Maximum circumferential speed: 80 m/s (depending on rpm and disc diameter) Fe/S/Cl < 0.1%
nu mb er Pa ck ag ing typ Pa e ck qu an tit y Mi nim um or de rq Ba ua nt rco ity 31 de 0.
on Di am ete rm m Bo re dia me ter mm Th ick ne ss mm

Product properties

Ordering information

With depressed centre

A 46 S BF A 46 S BF 22.23 22.23 2.5 2.389 U0 U505260 GAA GAA 2.21 2.31
Cutting, Grinding and Brushing | Cutting Discs | 471

Cutting discs Rapido

Appropriate for hand-held angle grinders Maximum circumferential speed: 80 m/s (depending on rpm and disc diameter) Fe/S/Cl < 0.1% The thin Rapido disc offers many advantages: fast and clean cutting with little exertion of force, very accurate, less noise and dust, and no blue discolouration or burr formation
tio n Di am ete rm m Bo re dia me ter mm Th ick ne ss mm

Sp ec ic a

Straight Cut virtually everything without disc changes Cutting disc for metal, Inox, non-ferrous metals, stone, soft tiles, marble and plastics
C 60 T BF C 60 T BF C 60 T BF 125 22.23 22.23 22.23 1.0 1.0 1.383 U0 U0 UGAA GAA GAA 1.39 1.47 1.58

Rapido

Straight Rapido Standard, the low-cost solution for Inox and metal
AS 60 T INOX BF AS 60 T INOX BF 22.23 22.23 1.0 1.549 U0 U219624 GAA GAA 1.28 1.52
AS 46 T INOX BF 115 22.23 1.215 UGAA 1.28
With depressed centre Rapido Standard, the low-cost solution for Inox and metal
AS 46 T INOX BF AS 46 T INOX BF 22.23 22.23 1.6 1.711 U0 U262859 GAA GAA 2.50 2.67
Straight Rapido Long Life, extremely long life for Inox and metal
A 60 W BF 41 A 60 W BF 125 22.23 22.221 U0 U449243 GAA GAA 1.46 1.75

Rapido MultiConstruction

nt gro u
472 | Cutting, Grinding and Brushing | Cutting Discs

Cutting discs Metal

Appropriate for hand-held angle grinders Maximum circumferential speed: 80 m/s (depending on rpm and disc diameter)

Straight

A 30 R BF A 30 S BF A 30 S BF A 30 S BF A 30 S BF A 30 R BF 16.00 22.23 22.23 22.23 22.23 22.23 2.8 2.5 2.5 3.0 3.0 3.649 U0 U0 U0 U0 U0 U252829 GAA GAA GAA GAA GAA GAA 0.73 0.82 0.94 1.19 1.52 4.13
A 30 S BF A 30 S BF A 30 S BF A 30 S BF 22.23 22.23 22.23 22.23 2.5 2.5 3.0 3.226 U0 U0 U0 U116473 GAA GAA GAA GAA 0.99 1.14 1.50 2.04
Straight Appropriate for chop saws / stationary pendulum action cutters/grinders Maximum drive power of 3 bhp/2.4 kW
A 36 R BF 350 25.40 2.543 UGAA 4.69
Straight Appropriate for petrol-driven freehand cutting machines

A 24 R BF 300 20.00 3.706 UGAA 2.81
Straight Appropriate for Cordless Angle Grinder GWS 14,4 V Professional with SDS-pro tting
A 46 Q BF 100 22.23 1.700 UGAA 1.14
Cutting, Grinding and Brushing | Cutting Discs | 473

Cutting discs Inox

Appropriate for hand-held angle grinders Maximum circumferential speed: 80 m/s (depending on rpm and disc diameter) Fe/S/Cl < 0.1%
tio n Di am ete rm m Bo re dia me ter mm Th ick ne ss mm Sp ec ic a
A 60 W BF 41 A 60 W BF 125 22.23 22.23 1.0 1.221 U0 U449243 GAA GAA 1.46 1.75
A 46 R BF 100 22.23 1.701 UGAA 1.95
474 | Cutting, Grinding and Brushing | Cutting Discs

Cutting discs Stone

C 24 R BF C 24 R BF C 24 R BF C 24 R BF 22.23 22.23 22.23 22.23 2.5 2.5 3.0 3.227 U0 U0 U0 U116480 GAA GAA GAA GAA 1.14 1.30 1.57 2.15
C 30 S BF C 24 R BF C 24 R BF C 24 R BF C 24 R BF 230 16.00 22.23 22.23 22.23 22.23 2.8 2.5 2.5 3.0 3.326 U0 U0 U0 U0 UGAA GAA GAA GAA GAA 0.77 0.90 1.14 1.41 1.57
C 24 R BF 300 20.00 4.707 UGAA 2.81
Cutting, Grinding and Brushing | Grinding Discs | 475
Vibration Control grinding discs: Less vibration and less noise
Vibration and noise always occur during grinding work. Vibration is noticeably reduced with the new semi-exible Vibration Control grinding discs. This optimises the work result and makes work more user-friendly 120 dB 100 dB 80 dB 60 dB 40 dB 20 dB 0 dB Bosch Vibration Control Standard

Less noise when grinding

98 dB 110 dB
Thanks to its exibility, the disc adapts well to the surface of the material being worked on
Cool grinding, improved chip removal and less discolouration of the surfaces: the special wafe design makes it possible
Semi-exible grinding discs Vibration Control
For light grinding work. Thanks to the exibility of the disc, it is ideally suited to working on curved surfaces. Other advantages of the disc: less vibration and noise development, cool grinding (less heat discolouration). No backing pad required Suitable for use in Inox, metal and aluminium Fe/S/Cl < 0.1%
tn um be r Pa ck ag ing typ Pa e ck qu an tit y Mi nim um or de rq Ba ua nt rco ity 31 de 0.
Product properties WA 46 BF WA 46 BF WA 46 BF 180 22.23 22.23 22.3 3
Ordering information U0 U0 UGAA GAA GAA 1.60 1.81 2.68
476 | Cutting, Grinding and Brushing | Grinding Discs

Grinding discs Metal

Grinding disc for metal Appropriate for hand-held angle grinders Maximum circumferential speed: 80 m/s (depending on rpm and disc diameter)

Aluminium oxide cup wheel with synthetic resin bond Appropriate for two-hand angle grinders, maximum speed up to 8,500 rpm Clamping with locking nut and two-hole spanner bent at right angles 950 004
rt nu mb er Pa ck ag ing typ Pa e ck qu an tit y Mi nim um or de rq Ba ua nt rco ity 31 de 0.
Mi n. dia me ter mm Ma x. dia me ter mm He igh tm m

Product properties 24 36

Ordering information C0a C0a C0a 026352 GAT GAT GAT 15.83 15.83 15.83
Conical cup wheels Stone, concrete
Silicon carbide cup wheel with synthetic resin bond Appropriate for two-hand angle grinders, maximum speed up to 8,500 rpm Clamping with locking nut and two-hole spanner bent at right angles 950 004

600 241

C0a C0a C0a

002882

GAT GAT GAT

13.24 13.24 13.24

480 | Cutting, Grinding and Brushing | Cup Wheels and Grinding Rings
Protective guard for grinding rings
Protective guard for grinding rings with coded lugs, for all Bosch angle grinders with n-max. 6,500 rpm and n-max. 8,500 rpm Appropriate for GWS 20-180; GWS 20-180 J; GWS 20-180 (J)H; GWS 20-230; GWS 20-230 J; GWS 20-230 JH; GWS 21-180 (J)HV; GWS 21-230 (J)HV; GWS 22-180 (J)H; GWS 22-230 (J)H; GWS 23-180; GWS 23-180 J; GWS 23-230; GWS 23-230 J; GWS 24-180 (J)BV; GWS 24-180 (J)BX; GWS 24-180 JH; GWS 24-230 (J)BV; GWS 24-230 (J)BX; GWS 24-230 (J)H; GWS 25-180; GWS 25-180 J; GWS 25-230; GWS 25-230 J; GWS 26-180 (J)BV; GWS 26-180 JH; GWS 26-230 (J)BV; GWS 26-230 JH; GWS 180; GWS 180 J; GWS 230 Professional; PWS; PWS 20-230; PWS 20-230 J; PWS 1900

P0f 016919 GAT 109.44

Grinding wheels for Bosch straight grinders
Grinding wheels for straight grinders Aluminium oxide
Suitable for coarse grinding work on steel or cast iron Synthetic resin bond, aluminium oxide, two-sided conical
W he el dia me ter mm Th ick ne ss (b 1) mm Th ick ne ss (b 2) mm Bo re dia me ter mm Gr it

Lis t gro up

ice Lis t Pr ice ex v at
Appropriate for GGS 6 Professional; Type 1207

069 C0a 057301 GAT 20.83

Cutting, Grinding and Brushing | Dust Extraction and Protective Guards | 481
Dust extraction and protective guards for Bosch angle grinders
Appropriate machines Dust extraction guards for sanding
GWS 8-115 (H20 ) GWS 8-115 Z (H31 0.) GWS 8-125 (H27) GWS 10-125 (H21.) GWS 10-125 Z (H32 0.) GWS 11-125 CI (H22.) GWS 11-125 CIE (H23.) GWS 11-125 CIH (H30 1./B.) GWS 14-125 CI (H24.) GWS 14-125 CIE (H25.) GWS 14-125 CIT (H29.) GWS 15-125 CIH (H30 2./C.) GWS 15-125 CIEH (H30 3./D.) GWS 15-125 CITH (H30 4./E.) GWS 1000; (H21.) GWS 1400 Professional. (H24.) PWS 10-125 CE (C47 000/030) PWS 13-125 CE (C48 000) GWS 7-115 GWS 14-125 CE GWS 7-115 (700 0.) GWS 9-125 (701 0.) GWS 10-125 C (702 7.) GWS 10-125 CE (702 7.) GWS 14 -125 C (704 7.) GWS 14-125 CE (705 7.) PWS 6-100 (372 0.) PWS 6-115/PWS 620 (372 0.) PWS 10-125 CE PWS 13-125 PWS 600 (371 0.) PWS 700 (373 0.) PWS 6-115 (C99 2.; C99 3.; C99 4.) PWS 7-100 (C99 640) PWS 7-115 (C99 5.; C99 6.) PWS 7-125 (C99 7.; C99 8.) PWS 7-125 CE; PWS 8-125 CE PWS 8-125 CE (C99 B.; C99 9.; C99 A.) PWS 9-125 CE PWS 10-125 CE; PWS 13-125 CE PWS 550 PWS 550 (C99 0.) PWS 600 PWS 600 (C99 1.) PWS 9-125 CE; PWS 700 PWS 720; PWS 850 CE GWS 7-115 GWS 14-125 CE 115 125

P. 489

510 256

510 257

P06 550

P06 551

025 282

510 258

PWS 700-115; PWS 720-115 PWS 750-115 (164 0.) PWS 7-125 CE (C98 8.) PWS 8-125 CE (C99 B.) PWS 9-125 (C99 A.) PWS 720-125; PWS 750-125 (164 1.) GWS 24-300 GWS 24-300 J Professional 510 291

510 299

GWS 20-230 H/J/JH (850.) GWS 21-230 HV/JHV (852 ) GWS 22-230 H/JH (H82.) GWS 23-230/J (754 ) GWS 24-230 BX/JBX (864.) GWS 24-230 H (H54 1./L.) GWS 24-230 H/BV/JBV (854.) GWS 24-230 JH ( H54 M.) GWS 25-230/J (756 ) GWS 26-230 B (H56 3./K.) GWS 26-230 BV/JBV (856.) GWS 26-230 JBV (H56 5.) GWS 26-230 JH (H56 M.) GWS 230, 20-230/J (752 ) PWS 20-230/603 C59 V./W.) PWS 20-230/J (359.) PWS 1900 (359 0.)
484 | Cutting, Grinding and Brushing | Dust Extraction and Protective Guards
Dust extraction guards for dust-free sanding Protective guards for additional safety when grinding Note: Please verify with the operating instructions of the machine for more detailed use
Productive, clean and safe sanding with Bosch angle grinder and dust extraction guard
Dust extraction guards for sanding
With brush ring Suitable for dust-free sanding of paint, varnish, plastics and wood in conjunction with sanding plates and bre sanding sheets or with tungsten carbide grinding heads (not suitable for metals)
mb er Pa ck ag ing typ Pa e ck qu an tit y Mi nim um or de rq Ba ua nt rco ity 31 de 0.
Dust extraction guard with brush ring Tool-free xing Appropriate for GWS 8-115 (H20 ); GWS 8-115 Z (H31 0.); GWS 8-125 (H27); GWS 10-125 (H21.); GWS 10-125 Z (H32 0.); GWS 11-125 CI (H22.); GWS 11-125 CIE (H23.); GWS 11-125 CIH (H30 1./B.); GWS 14-125 CI (H24.); GWS 14-125 CIE (H25.); GWS 14-125 CIT (H29.); GWS 15-125 CIEH (H30 3./D.); GWS 15-125 CIH (H30 2./C.); GWS 15-125 CITH (H30 4./E.); GWS 1000 (H21.); GWS 1400 Professional (H24.); PWS 10-125 CE (C47 000/030); PWS 13-125 CE (C48 000)

C0a 375160 GAT 41.06

Dust extraction guard with brush ring Tool-free xing Appropriate for GWS 7-115 GWS 14-125 CE; GWS 7-115 (700 0.); GWS 9-125 (701 0.); GWS 10-125 C (702 7.); GWS 10-125 CE (702 7.); GWS 14 -125 C (704 7.); GWS 14-125 CE Professional (705 7.); PWS 6-100 (372 0.); PWS 6-115/PWS 620 (372 0.); PWS 10-125 CE PWS 13-125; PWS 600 (371 0.); PWS 700 (373 0.)

C0a 067911 GAT 29.62

Cutting, Grinding and Brushing | Dust Extraction and Protective Guards | 485
Dust extraction guard for sanding, with clamp tting Appropriate for GWS 7-115 GWS 14-125 CE Professional; PWS 6-115 (C99 2.; C99 3.; C99 4.); PWS 7-100 (C99 640); PWS 7-115 (C99 5.; C99 6.); PWS 7-125 (C99 7.; C99 8.); PWS 7-125 CE; PWS 8-125 CE; PWS 8-125 CE (C99 B.; C99 9.; C99 A.); PWS 9-125 CE; PWS 10-125 CE; PWS 13-125 CE; PWS 550; PWS 550 (C99 0.); PWS 600; PWS 600 (C99 1.); PWS 700; PWS 720; PWS 850 CE

281 C0a 272568 GAT 49.70

Replacement brush for 510 224

C0a 375177 GAT 12.38

Replacement brush for and 510 281

C0a 067904 GAT 19.47

Without cover for general grinding and sanding work EN/EC 60745
Protective guard Without cover for grinding with clamp tting, screw-type fastening Appropriate for GWS 5-100 (375 0.); GWS 6-100 (375 0.); GWS 6-100 E (375 7.); GWS 7-100 (C88 1.); GWS 580 (375 0.); GWS 670 Professional (375 0.)

619 PP0f 492744 GAT 6.25

Appropriate for GWS 5-115 (376 2.); GWS 6-115 (375 0.; 375 7.; 375 9.); GWS 6-115 E (375 5.; 375 7.; 375 9.); GWS 7-115 (C88 1.; C88 2.); GWS 580 (376 0.); GWS 780 C (377 56.); GWS 850 C Professional (377 5.)

619 PP0f 492751 GAT 6.25

Appropriate for GWS 6-125 (375 1.); GWS 6-125 E (375 9.); GWS 7-125 (C88 1.); GWS 850 C (377 7.; 377 9.); GWS 850 CE Professional (377 7.; 377 9.)

619 PP0f 492768 GAT 6.07

Protective guard without cover with easy-to-use adjustment and tool-free attachment Appropriate for GWS 7-115 Professional (700 0.)

102 P0f 062497 GAT 20.11

486 | Cutting, Grinding and Brushing | Dust Extraction and Protective Guards
Protective guard without cover with easy-to-use adjustment and tool-free attachment Appropriate for GWS 7-125 (700 048); GWS 9-125 (701 0.); GWS 10-125 C (702 7.); GWS 10-125 CE Professional (703 7.)

101 P0f 062480 GAT 20.11

Protective guard without cover with easy-to-use adjustment and tool-free attachment Appropriate for GWS 8-115 (H20 ); GWS 8-115 Z (H31 0.); GWS 1000 (H21 0.); GWS 1400 Professional (H24 0.)

364 P0f 364089 GAT 12.38

Protective guard without cover with easy-to-use adjustment and tool-free attachment Appropriate for GWS 8-125 (H27); GWS 10-125 (H21.); GWS 10-125 Z (H32 0.); GWS 11-125 CI (H22.); GWS 11-125 CIE (H23.); GWS 11-125 CIH (H39 1./B.); GWS 14-125 CI (H24.); GWS 14-125 CIE (H25.); GWS 14-125 CIT (H29.); GWS 15-125 CIEH (H30 3./D.); GWS 15-125 CIH (H30 2./C.); GWS 15-125 CITH (H30 4./E.); GWS 1400 Professional (H24.); PWS 10-125 CE (C47 0.); PWS 13-125 CE (C48 0.)

365 P0f 364096 GAT 14.19

Protective guard without cover with easy-to-use adjustment and tool-free attachment Appropriate for GWS 14-150 CI (H26 ); GWS 15-150 CIH Professional (H30 5./F.)

366 P0f 364102 GAT 21.31

Protective guard without cover for grinding Easy-to-use adjustment, tool-free attachment Appropriate for GWS 22-180 LVI (H90 D.); GWS 24-180 LVI (H92 F.); GWS 26-180 JBV Professional (H55 U.)

280 P0f 482547 GAT 26.55

Protective guard without cover for grinding Easy-to-use adjustment, tool-free attachment Appropriate for GWS 22-230 LVI (H91 D./C.); GWS 24-230 JBX (H64 4./R./T.); GWS 24-230 LVI (H93 F./H.); GWS 26-230 (H56 5.); GWS 26-230 BV (H56 S.); GWS 26-230 JBV Professional (H56 U.)

281 P0f 482554 GAT 28.80

Cutting, Grinding and Brushing | Dust Extraction and Protective Guards | 487
Protective guard Clamp with screw-type fastening, with coding Appropriate for GWS 20-180/H/JH (849.); GWS 21-180 HV/JHV (851.); GWS 22-180 H/JH (H81.); GWS 23-180/J (753.); GWS 24-180 BX/JBX (863.); GWS 24-180 H (H53 1.); GWS 24-180 H/BV/JBV (853.); GWS 24-180 JH (H53 M.); GWS 25-180/J (755.); GWS 26-180 B (H55 K.); GWS 26-180 BV/JBV (856.); GWS 26-180 H (H55 1.; H56 1./L.); GWS 26-180 JH (H55 M.); GWS 180/J, 20 -180/J Professional (751.)

297 C0a 542166 GAT 14.55

Protective guard Clamp with screw-type fastening, with coding Appropriate for GWS 20-230 H/J/JH (850.); GWS 21-230 HV/JHV (852 ); GWS 22-230 H/JH (H82.); GWS 23-230/J (754 ); GWS 24-230 BX/JBX (864.); GWS 24-230 H (H54 1./L.); GWS 24-230 H/BV/JBV (854.); GWS 24-230 JH ( H54 M.); GWS 25-230/J (756 ); GWS 26-230 B (H56 3./K.); GWS 26-230 BV/JBV (856.); GWS 26-230 JBV (H56 5.); GWS 26-230 JH (H56 M.); GWS 230, 20-230/J Professional (752 ); PWS 20-230/J (359.); PWS 20-230/1900 (C59 V./W.); PWS 1900 (359 0.)

298 C0a 542173 GAT 16.66

Protective guard without cover for grinding Easy-to-use adjustment, tool-free attachment Appropriate for PWS 700-115; PWS 720-115; PWS 750-115 (164 0.)

288 P0f 498302 GAT 5.15

Protective guard without cover for grinding Easy-to-use adjustment, tool-free attachment Appropriate for PWS 7-125 CE (C98 8.); PWS 8-125 CE (C99 B.); PWS 9-125 (C99 A.); PWS 720-125; PWS 750-125 (164 1.)

289 P0f 498319 GAT 5.15

488 | Cutting, Grinding and Brushing | Dust Extraction and Protective Guards
Cover for safe cut-off grinding EN/EC 60745
Protective guard with cover for cutting with clamp tting, screw-type fastening Appropriate for GWS 5-100 (375 0.); GWS 6-100 (375 0.); GWS 6-100 E (375 7.); GWS 580 (375 0.); GWS 670 Professional

619 PP0f 492775 GAT 8.93

Appropriate for GWS 5-115 (376 2.); GWS 6-115 (375 0.; 375 7.; 375 9.); GWS 6-115 E (375 5.; 375 7.; 375 9.); GWS 580 (376 0.); GWS 780 C (377 56.); GWS 850 C Professional (377 5.)

619 PP0f 492782 GAT 8.93

Appropriate for GWS 6-125 (375 1.); GWS 6-125 E (375 9.); GWS 850 C (377 7.; 377 9.); GWS 850 CE Professional (377 7.; 377 9.)

619 PP0f 492799 GAT 9.50

Protective guard with cover for cutting Clamp tting, coding, quick fastening Appropriate for GWS 22-180 LVI (H90 D.); GWS 24-180 LVI (H92 F.); GWS 26-180 JBV Professional (H55 U.)

282 P0f 485715 GAT 47.03

Protective guard with cover for cutting Clamp tting, coding, quick fastening Appropriate for GWS 22-230 LVI (H91 D./C.); GWS 24-230 JBX (H64 4./R./T.); GWS 24-230 LVI (H93 F./H.); GWS 26-230 (H56 5.); GWS 26-230 BV (H56 S.); GWS 26-230 JBV Professional (H56 U.)

283 P0f 485722 GAT 49.44

Protective guard Clamp tting with coding and quick fastening Appropriate for GWS 20-180/H/JH (849.); GWS 21-180 HV/JHV (851.); GWS 22-180 H/JH (H81.); GWS 23-180/J (753.); GWS 24-180 BX/JBX (863.); GWS 24-180 H (H53 1.); GWS 24-180 H/BV/JBV (853.); GWS 24-180 JH (H53 M.); GWS 25-180/J (755.); GWS 26-180 B (H55 K.); GWS 26-180 BV/JBV (856.); GWS 26-180 H (H56 1./L.); GWS 26-180 JH (H55 M.); GWS 180/J, 20 -180/J Professional (751.)

299 C0a 542180 GAT 25.62

Cutting, Grinding and Brushing | Dust Extraction and Protective Guards | 489
Protective guard Clamp tting with coding and quick fastening Appropriate for GWS 20-230 H/J/JH (850.); GWS 21-230 HV/JHV (852 ); GWS 22-230 H/JH (H82.); GWS 23-230/J (754 ); GWS 24-230 BX/JBX (864.); GWS 24-230 H (H54 1./L.); GWS 24-230 H/BV/JBV (854.); GWS 24-230 JH ( H54 M.); GWS 25-230/J (756 ); GWS 26-230 B (H56 3./K.); GWS 26-230 BV/JBV (856.); GWS 26-230 JBV (H56 5.); GWS 26-230 JH (H56 M.); GWS 230, 20-230/J Professional (752 ); PWS 20-230/1900 (C59 V./W.); PWS 20-230/J (359.); PWS 1900 (359 0.)

Backing ange with locking nut M14 left, with marker groove Appropriate for Slot Cutter GSF 100 A Professional (367)

P0b 078146 GAT 3.23

Locking ange Appropriate for 333.

PC1c 024440 GAT 18.08

Backing ange for discs with 115/125 mm diameter Appropriate for PWS 700-115; PWS 720-115; PWS 750-115; PWS 720-125; PWS 750-125

498463 GAT 2.51

Cutting, Grinding and Brushing | Accessories for Angle Grinders | 493
Two-hole spanners for angle grinders
Two-hole spanner, bent at right angles Appropriate for cup wheels

PC1c 002356 GAT 7.53

Two-hole spanner, straight for clamping all discs on angle grinders

PC1c 016483 GAT 3.64

Two-hole spanner, straight for clamping all discs on two-hand angle grinders and straight grinders Appropriate for GGS 6 Professional

P0b 040891 GAT 4.42

Bow handles for angle grinders
Appropriate for all Bosch two-hand angle grinders, for left-handers and right-handers With safety device to prevent inadvertent release
Bow handle Appropriate for GWS 20-180; GWS 20-180 H; GWS 20-180 (J)H; GWS 20-230; GWS 20-230 (J)H; GWS 21-180 (J)HV; GWS 21-230 (J)HV; GWS 22-180 (J)H; GWS 22-230 (J)H; GWS 23-180; GWS 23-180 J; GWS 23-230; GWS 23-230 J; GWS 24-180 (J)BV; GWS 24-180 JH; GWS 24-230 (J)BV; GWS 24-230 (J)H; GWS 24-230 JBX; GWS 25-180; GWS 25-180 J; GWS 25-230; GWS 25-230 J; GWS 26-180 (J)BV; GWS 26-180 JH; GWS 26-230 (J)BV; GWS 26-230 JH; GWS 180; GWS 180 J; GWS 230 Professional; PWS; PWS 20-230; PWS 20-230 J; PWS 1900

P0b 048002 GAT 47.61

Bow handle Appropriate for GNS 14; GPO 12 E Professional

P0b 049108 GAT 71.29

494 | Cutting, Grinding and Brushing | Accessories for Angle Grinders
Handles for angle grinders
For left-handers and right-handers
Handle Appropriate for GUF 4-22 A Professional; PSF 22-A and all Bosch one-hand angle grinders and compact belt sanders with M10; PWS 6-13

P0f 016377 GAT 3.38

Handle Appropriate for all Bosch two-hand angle grinders with M14

P0f 070232 GAT 9.32

Handle M10 with Vibration Control Appropriate for PWS 700-115; PWS 720-115; PWS 750-115; PWS 720-125; PWS 750-125

498449 GAT 11.67

Handle M10 Appropriate for PWS 700-115; PWS 720-115; PWS 750-115; PWS 720-125; PWS 750-125

498456 GAT 4.35

Handle M10 with Vibration Control Appropriate for small angle grinders

451444 GAT 15.23

Handle M14 with Vibration Control Appropriate for large angle grinders

485708 GAT 11.45

Cutting, Grinding and Brushing | Wire Brushes | 495
Wire brushes for drills, straight grinders and angle grinders
Bosch wire brushes have been optimised for use: oil-toughened special steel wire for universal use, brass-coated special steel wire, stainless steel wire for machining stainless steel, nylon with aluminium oxide coated abrasive for sanding down paint on wood

W ire th ick ne ss mm Ma x. sp ee dr pm

Th rea d

Tapered brush with thread
100 0.5 12,C1d 036023 GAT 22.07
Wire cup brushes for drills Crimped wire
Suitable for numerous applications on medium-sized surfaces, such as removing paint, de-rusting, cleaning of formwork boards and facings, deburring, descaling, roughing, matt sanding

W ire th ick ne ss mm

Wire cup brush with 6 mm shank
0.2 0.3 0.2 0.3 4,500 4,500 4,500 4,270 C1d C1d C1d C1d GAT GAT GAT GAT 3.83 4.12 4.81 4.47
Wire cup brushes for drills Crimped wire, brass-coated
Suitable for numerous applications like those performed using brushes made of steel wire Corrosion protection provided by brass-coated wire
50 0.2 4,008 C1d 035996 GAT 5.42
498 | Cutting, Grinding and Brushing | Wire Brushes
Wire wheels for drills Crimped wire
Suitable for cleaning work, such as removing paint, rust, scale, crusts or burr with effective results

idt hm m

Wire wheel with 6 mm shank
100 0.3 0.2 0.3 4,500 4,500 4,C1d C1d C1d 004541 GAT GAT GAT 3.15 4.12 4.12
Wire wheels for drills Crimped wire, brass-coated
Suitable for cleaning applications like those performed using a steel wire brush Corrosion protection provided by brass-coated wire
75 0.2 4,C1d 036009 GAT 5.29
Pencil brush for drills and straight grinders Crimped wire
Suitable for removing burr, rust, slag, scale, surplus rubber, combustion residues and other forms of dirt in hard-to-reach areas and inner surfaces. Ideal for roughing, deburring, paint stripping, deslagging, descaling, matt sanding and cleaning

Lis t p tg

sc ou n
Pencil brush with 6 mm shank
25 0.3 18,269 C1d 004503 GAT 4.12
Cutting, Grinding and Brushing | Bosch Grinding Brush | 499
Accessories for the Bosch grinding brush
Appropriate for Bosch Grinding Brushes GEB 1000 CE Professional and PEB 500 E
Bosch SDS toolholder for fast changes at the push of a button
Perfect work in hard-to-reach areas
Brushes, knotted 0.5 mm steel wire

W he el dia me ter mm

Cu pd iam ete rm m
Wire cup brush Suitable for removing heavy rust or underseal, removing varnish or paint on metal, cleaning welded seams (steel) or, for example, construction tools

600 C1a 155106 GAT 6.58

Wire wheel Suitable for extreme use, for example when deburring, paint stripping, removing rust, deslagging, descaling or cleaning welded seams

626 C1a 155366 GAT 5.58

500 | Cutting, Grinding and Brushing | Bosch Grinding Brush
Pencil brush, knotted 0.35 mm wire
Pe n mm cil b ru sh dia me ter
Pencil brush Suitable for cleaning the inside of cylindrical drilled holes and inner surfaces of pipes; Range of applications: roughing, deburring, paint stripping, deslagging, descaling, matt sanding, cleaning The brush opens or closes by means of different centrifugal forces when the speed changes; this provides excellent exibility and cleaning efciency

648 C1a 155595 GAT 8.24

Brushes, crimped 0.3 mm steel wire
W he el dia me ter mm Pe nc mm il b ru sh dia me ter
Wire cup brush Ideally suited to removing light rust (rust lm) Suitable for removing heavy rust, removing varnish or paint on metal, cleaning welded seams (steel)

610 C1a 155205 GAT 3.47

Wire wheel Suitable for light to medium-hard brush applications, particularly in hard-to-reach areas, for example roughing, deburring, paint stripping, deslagging, descaling, matt sanding, cleaning Model has twin rows

630 C1a 155403 GAT 4.59

Cutting, Grinding and Brushing | Bosch Grinding Brush | 501

Brushes, nylon

Ideally suited to removing varnish or paint on metal, cleaning welded seams (steel and stainless steel), removing annealing colour on welded seams (stainless steel), cleaning non-ferrous metals such as copper, brass and aluminium, structuring wood Suitable for removing light rust (rust lm), removing varnish or paint on wood, surface nishing for steel and matt nishing
Cu pd iam ete rm m W he el dia me ter Pe nc mm mm il b ru sh dia me ter

Wire wheel

coarse/C1a 155335 GAT 10.27
Sanding sleeves for Bosch grinding brush
Suitable for smoothing welded seams (steel), grinding, deburring, chamfering steel
Product properties x Bx Bx B30
Ordering information C1a C1a C1a 185721 GAT GAT GAT 4.90 4.90 4.90

80 120

45 x Bx Bx Bx B30

606 878

C0a C0a C0a C0a

181426 181433

GAX GAX GAX GAX

92.73 92.73 92.73 92.73

Rubber locking mechanism Suitable for clamping sanding sleeves

40 x B600 C1a 185684 GAT 10.27
502 | Cutting, Grinding and Brushing | Bosch Grinding Brush
Flap wheels for Bosch grinding brush
Flap wheels Inox-Forte: Suitable for deburring stainless steel Flap wheels: Suitable for removing light rust (rust lm), removing varnish or paint on wood, surface nishing for steel and matt nishing
Flap wheel Inox-Forte dia. 75 mm x 30 mm
642 C1a C1a C1a 189590 GAT GAT GAT 13.86 13.85 13.86
Flap wheel dia. 75 mm x 30 mm
C1a C1a C1a C1a GAT GAT GAT GAT 12.82 12.82 12.82 12.82
Fleece brush for Bosch grinding brush
Ideally suited to removing annealing colour on welded seams (stainless steel), surface nishing for steel and matt nishing, cleaning non-ferrous metals such as copper, brass and aluminium Suitable for removing light rust (rust lm), structuring wood
Fleece brush dia. 60 mm x 50 mm

C1a 185813 GAT 12.82

Cutting, Grinding and Brushing | Bosch Grinding Brush | 503
Power eece for Bosch grinding brush
Ideally suited to removing light rust (rust lm), removing varnish or paint on metal, removing annealing colour on welded seams (stainless steel), roughing (e.g. for adhesive contact points) Suitable for cleaning welded seams (steel and stainless steel), grinding steel, surface nishing for steel/matt nishing, cleaning non-ferrous metals such as copper, brass and aluminium, structuring wood

Grinding eece

626 C1a 185943 GAT 12.82
Hard grinding stone Aluminium oxide
Suitable for smoothing welded seams (steel), grinding, deburring, chamfering steel, sharpening
Grinding stone Aluminium oxide, hard, cylinder

645 C1a 189620 GAT 6.12

Felt disc and polishing agent for Bosch grinding brush

Di sc dia me ter mm

Polishing felt Suitable for polishing delicate surfaces

C1a 189644 GAT 6.33

504 | Cutting, Grinding and Brushing | Grinding Stones
Grinding stones for straight grinders and drills
Highest quality of grinding grit, bonding material and backing material Tools for safe and efcient grinding and deburring with straight grinders and drills

Best work results with Bosch grinding stones when deburring non-hardened or hardened steel
Grinding stones Aluminium oxide, for straight grinders and drills
Appropriate for all straight grinders with collets and for drills For non-hardened and hardened steel Shapes of stones: round (a), half-round (b), cylindrical (c), disc-shaped (d), tapered (e)
ts ha nk mm St rai gh ts ha nk Inc Gr h it
Di am ete rm m Le ng th mm
5-piece grinding stone set
6 (a) 6 (b) 6 (c) 6 (d) 6 (e) 286 C1d 004565 GAT 12.79
Grinding stone Cylindrical, hard

P0b 047814 GAT 5.94

Cutting, Grinding and Brushing | Grinding Stones | 505
ha nk mm St rai gh ts ha nk Inc Gr h it

St rai

Grinding stone Cylindrical, medium-hard
1/P0b P0b P0b 047777 GAT GAT GAT 3.33 3.11 3.33
Grinding stone Conical, medium-hard
6 1/014 P0b P0b GAT GAT 3.33 6.27
506 | Cutting, Grinding and Brushing | Bosch Straight Grinders
Accessories for Bosch straight grinders
Collets without locking nut

Di am ete rI nc h

Collet without locking nut Appropriate for GGS 27; GGS 27 C Professional

008 P0b 049023 GAT 10.52

Collet without locking nut Appropriate for GGS 27; GGS 27 C Professional; POF 500 A; POF 600 ACE

047 P1c 013505 GAT 9.05

1/P1c P1c GAT GAT 9.59 10.39

Collets with locking nut

Collet with locking nut Appropriate for GGS 7 C; GGS 27 L; GGS 27 LC; GGS 1212 Professional

082 P0b 031103 GAT 26.58

084 P0b 031110 GAT 33.18

086 P0b 031134 GAT 26.58

1/085 P0b 031127 GAT 26.58
1/083 P0b 032612 GAT 26.58
Cutting, Grinding and Brushing | Bosch Straight Grinders | 507
Collet with locking nut Appropriate for GGS 16 Professional
040 P0b P0b P0b 026048 GAT GAT GAT 35.64 33.74 33.96
Toolholder Appropriate for GGS 27 L, Type 1212; GGS 7 C Professional
047 P0f 024600 GAT 166.79
Spanner Appropriate for GGS 16 Professional
PC1c PC1c GAT GAT 4.93 2.45
Dressing stone Appropriate for GGS 6 S; GGS 7 C; GGS 16; GGS 27; GGS 27 C; GGS 27 L; GGS 27 LC Professional; Type 1207; Type 1210; Type 1212

P0b 024532 GAT 3.58

Round nut for level discs Appropriate for GGS 6 Professional

P0b 048767 GAT 20.93