98907298_MR6550_MFP_S6-40.indd 8

02.04.2009 15:55:15 Uhr

Handblender 1. turbo Whisk 3. 15 Food preparation attachment see speed tables in picture sections (j) Chopper see speed tables in picture sections (j)
For chopping hard goods, use the turbo switch. N.B.: Do not chop extremely hard food, such as nutmeg, coffee beans and grains. Before chopping. pre-cut meat, cheese, onions, garlic, carrots, chillies remove stalks from herbs, un-shell nuts remove bones, tendons and gristle from meat a) Carefully remove the plastic cover from the blade (3). Caution: the blade is very sharp! Always hold it by the upper plastic part. Place the blade on the centre pin of the bowl (4) and give it a turn to lock into place. Always place the bowl on the antislip base (5). b) Place the food in the chopper bowl. c) Attach the lid (2) onto the bowl with the interlock (2c) positioned next to the bowl handle. To lock the lid, turn it clockwise so that the interlock engages with a click above the handle. d) Insert the motor part ! into the coupling (2a) until it locks. Make sure the pusher is in place. e) To operate, press switch or on the motor part and take hold of the bowl with your other hand. f) After use, press buttons to remove the motor part. Remove the pusher. g) Pressing the lid interlock (2c), turn the lid (2) counter-clockwise to unlatch it and lift it up. h/i) Carefully take out the blade by turning and pulling it, before removing the processed food.
How to operate your handblender 1
The handblender is perfectly suited for preparing dips, sauces, soups, mayonnaise and baby food as well as for mixing drinks and milkshakes: a) Insert the motor part ! into the blender shaft & until it locks. b) Introduce the handblender vertically into the vessel, then press switch or turbo switch. c) To release the blender shaft after use, press buttons and pull it off. You can operate the handblender in the measuring beaker , and just as well in any other vessel. When blending directly in the saucepan while cooking, take the pan from the stove rst to protect the appliance from overheating.
How to operate your whisk 2

Use the whisk only for whipping cream, beating egg whites and mixing sponges and ready-mix desserts: a) Insert the whisk into the whisk gearbox , then insert the motor part ! into the gearbox until it locks. b) Place the whisk in a vessel and only then, press switch to operate it. c) To release, press buttons and pull off the gearbox. Then pull the whisk out of the gearbox. For best results. use a wide bowl rather than the beaker move the whisk clockwise, holding it slightly inclined Whipped cream: Only whip up to 400 ml chilled cream (min. 30 % fat content, 48 C). Start with a low speed setting 1 and while whipping, increase the speed to setting 15. Egg snow: Only whip up to 4 egg whites. Start with a medium speed setting 7 and while beating, increase the speed to setting 15.

Mixing light dough

Using the blade (3), you may also mix light dough like a pancake batter or a cake mixture based on up to 250 g our. For a pancake batter, for instance, rst pour liquids into the bowl, then add our and nally eggs. Pressing the turbo switch , mix the batter until smooth.

Slicing / shredding

(see picture section II with processing table j ) Using the slicing tool (6a), you can slice e.g. cucumbers, onions, mushrooms, apples, carrots, radishes, raw potatoes, courgettes, cabbage. Using the shredding tools (6b, 6c), you can shred e.g. apples, carrots, raw potatoes, beetroot, cabbage, cheese (soft to medium). The Julienne tools (6d, 6e) cut food into strips. These tools should be handled with care to avoid injury. a) Place a tool (6a6e) into the tool holder (6) and snap into position. Place the tool holder on the centre pin of the bowl and give it a turn to lock into place. b) Attach the lid (2) onto the bowl with the interlock (2c) positioned next to the bowl handle. To lock the lid, turn it clockwise so that the interlock engages with a click above the handle. c) Insert the motor part into the coupling until it locks. Select speed settings according to recommendations in picture (j). d) Fill the food to be processed into the lling tube. Never reach into the lling tube when the appliance is switched on. Always use the pusher (1) to feed in food. e) Press switch or on the motor part to operate. 9
How to operate your food preparation (FP) attachment 3
1 Pusher 2 Lid 2a Coupling for motor part 2b Filling tube 2c Lid interlock 3 Blade 4 Bowl 5 Anti-slip base (also serves as a lid) 6 Tool holder 6a Slicing tool 6b Shredding tool (coarse) 6c Shredding tool (ne) 6d Julienne tool (rectangular) 6e Julienne tool (triangular)

Chopping

(see picture section I with processing table j ) The blade (3) is perfectly suited for chopping meat, cheese, onions, herbs, garlic, carrots, walnuts, hazelnuts, almonds etc.
98907298_MR6550_MFP_S6-40.indd 9
f) After use, press buttons to remove the motor part. g) Pressing the lid interlock (2c), turn the lid counter-clockwise to unlatch it and lift it up. h) Take out the tool holder before removing the processed food. To remove the tool (6a6e), push it up at the end that protrudes at the bottom of the tool holder.

BC: Chopper attachment, perfectly suited for chopping large quantities as well as for preparing shakes, making light doughs and crushing ice cubes.

Recipe examples

Mayonnaise (use handblender) 200250 ml oil, 1 egg (yolk and white), 1 tbsp. lemon juice or vinegar, salt and pepper to taste Put all ingredients into the beaker according to the a.m. order. Introduce the handblender to the base of the beaker. Pressing the turbo switch , keep the handblender in this position until the oil emulsies. Then, without switching off, slowly move it up and down until the mayonnaise is well combined. Vanilla-Honey-Prunes (as a pancake stufng or spread) (use the chopper attachment {, speed turbo) Fill 60 g creamy honey and 50 g prunes into the chopper bowl and chop 10 seconds, then add 30 ml water (vanilla-avoured) and resume chopping for 3 seconds. Subject to change without notice. This product conforms to the European Directives EMC 2004/108/EC and Low Voltage 2006/95/EC. Please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country.
How to operate your chopper attachment 4
Upper part Blade Chopper bowl Anti-slip base/lid
The chopper is perfectly suited for chopping meat, cheese, onions, herbs, garlic, chilis (with water), carrots, walnuts, hazelnuts, almonds, prunes etc. When chopping hard goods (e.g. hard cheese) use the turbo switch. N.B.: Do not chop extremely hard food, such as ice cubes, nutmeg, coffee beans or grains. Before chopping. pre-cut meat, cheese, onions, garlic, carrots, chillies, remove stems from herbs, shell nuts, remove bones, tendons and gristle from meet. For best results, please refer to the speed settings recommended in the processing table (j). Chopping a) Carefully remove the plastic cover from the blade (2). Caution: The blade is very sharp! Always hold it by the upper plastic part. Place the blade on the centre pin of the chopper bowl (3). Press down the blade and turn 90 to lock it. Always place the chopper bowl on the anti-slip base (4). b) Place the food in the chopper bowl. c) Put the upper part (1) on the chopper bowl. d) Insert the motor part ! into the upper part (1) until it locks into place. e) Press switch or # to operate the chopper. During processing, hold the motor part with one hand and the chopper bowl with the other. Do not use the chopper for longer than 2 minutes. f) After use, press buttons to remove the motor part. g) Then remove the upper part. h) Carefully take out the blade. i) Remove the processed food from the chopper bowl. The anti-slip base also serves as a lid for the chopper bowl.

Franais

Nos produits sont conus et fabriqus pour satisfaire aux plus hautes exigences de qualit, de fonctionnalit et de design. Nous esprons que votre nouveau prparateur culinaire Braun vous apportera entire satisfaction. Attention Lisez le mode demploi attentivement et en entier avant dutiliser cet appareil. Les lames et les outils (6a6e) sont trs coupants ! Pour ne pas vous blesser, manipulez les lames avec prcaution. Cet appareil nest pas destin des enfants ou des personnes aux capacits mentales et physiques rduites moins quelles ne soient sous la surveillance dun adulte responsable de leur scurit. Mais de manire gnrale nous recommandons de maintenir cet appareil hors de porte des enfants. Cet appareil a t conu pour la prparation de quantits domestiques classiques. Dbranchez systmatiquement lappareil lorsque vous ne lutilisez pas, et avant de monter ou de dmonter des accessoires, de le nettoyer ou de le ranger. Avant de brancher lappareil, bien vrier que la tension correspond celle indique sous lappareil (bloc moteur). Durant lutilisation du mixeur dans des liquides chauds, ne pas immerger le pied mixeur ou le retirer du liquide lorsque lappareil est en marche.