Orienta Oklahoma 73737 OK http://www.centralmasshomewarranty.com Coffeemaker Manuals Braun Coffeemaker Manuals 12-cup Programmable Coffee Pot, 12-cup Programmable Coffeemaker, Automatic Coffeemaker, Automatic Drip Machine, Automatic Drip Maker Braun Coffeemaker Manuals
Braun Nescafe Nescup User Manual Model NC1000 Type 3150 NC1000 Braun Coffeemaker Manuals
http://www.centralmasshomewarranty.com
Problems with your home can happen when you least expect. The last thing a home owner may have is time, patience or savings for an unexpected, costly repair. A Central Mass Home Warranty can help cover replacement or repairs of electrical, plumbing, HVAC systems and appliances.
Coffeemaker Manuals 12-cup Programmable Coffee Pot, 12-cup Programmable Coffeemaker, Automatic Coffeemaker, Automatic Drip Machine, Automatic Drip Maker Braun Nescafe Nescup User Manual Model NC1000 Type 3150 NC1000 Braun Coffeemaker Manuals

3150350_Nescup_S6-24 Seite 13 Donnerstag, 6. Oktober 2005 3:05 15

English Introduction

Thank you for purchasing the Braun Nescaf Nescup Automatic Coffee System. Nescaf and Braun have jointly developed this revolutionary and high-quality system to enable you to prepare a great choice of coffees either a small cup or a mug with a perfect crema, a cappuccino always topped with a delicious froth made from fresh milk or hot water for tea, and more. Each cup is individually brewed to your personal taste ensuring the fullest aroma and pleasure. Please read these use instructions carefully & completely before using the machine.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Coffee container Water filter compartment Water tank stop button Water filter exchange signal Water signal Power/stand-by signal Manual button Cappuccino button Mug button Cup button Water filter Liquid content selector Drip tray Water pipe Brewing chamber lid Coffee/water selector Coffee strength selector Measuring beaker On/off switch Brewing unit Brewing mechanism seal Brewing mechanism lid Coffee pipe Dosing tube
Only fill pure instant coffee in the coffee container. Never use ground coffee or soluble product with hard non-soluble pieces (e.g. toffee pieces) as this blocks and damages the unit. Only use the machine with a completely assembled brewing unit (U). Do not fill the brewing unit (U) with more than 30 g soluble product or 60 ml milk. If you want to stop the machine, press the stop button (D). If liquid remains inside, press the cup button (K) until the brewing unit is empty. Then press the stop button again to continue. The machine produces hot water and steam use with care to avoid scalding. Cleaning the machine regularly is important. Rinse at least before first cup of the day. For more details refer to the Cleaning section. People suffering from milk allergy should not use the machine if it is also used for beverages containing milk. Braun electrical appliances meet the applicable safety standards. Repairs to electrical appliances including cord replacement must only be carried out by authorised Braun service centres. Faulty, unqualified repair work may cause accidents or injury to the users.

Preparing the Machine for Use
1. Rinse the water tank (C), the brewing unit (U) and the glass container (A) with water and ensure they are completely dry before you reassemble them. 2. For optimum taste we also recommend rinsing the machine interior by following the procedure below: Remove the water filter (L) from its foil and immerse it in a large glass or cup filled with water for 10 minutes. Then insert it in the water filter compartment (B) (see I) by firmly pressing down. Fill the water tank (C) to the maximum mark with fresh, cold drinking water (see II). Plug in the machine and switch it on (T). The power/stand-by signal (G) indicates that Braun Nescaf Nescup is on standby and ready to be rinsed. Place a large cup on the drip tray (N) (see III) and ensure that the coffee/water selector (Q) is in the coffee position. Select the manual button (H) first, then press the mug button (J). After brewing has stopped, empty the cup and repeat once more. Now turn the coffee/water selector (Q) into 13
Important This machine is intended for household use only. Keep out of the reach of children. Place the machine on a dry, flat and fixed surface. Never immerse the machine in water. Never carry the machine with the water tank (C) attached. The tank may fall off. Before plugging in, check that your voltage corresponds with the voltage printed on the bottom of the machine. Always use fresh, cold drinking water to fill the water tank. Never fill the water tank with any other liquids.
3150350_Nescup_S6-24 Seite 14 Donnerstag, 6. Oktober 2005 3:05 15
the water position, place a cup on the drip tray and press the mug button (J). After brewing has stopped, empty the cup and repeat once more. 3. Pull the coffee container (A) upwards without turning. Hold it with the glass bottom down and remove the plastic lid by turning anti-clockwise. Fill the coffee container with instant coffee. Then close the lid by tightly turning clockwise. Re-insert the coffee container into the machine. (see IV, 1-5) The machine is now ready for use.
Cappuccino Follow steps 1. and 2. and choose the coffee strength. Open the brewing chamber lid (P). Using the measuring beaker, fill milk into the brewing unit (U) (maximum 60 ml) and close the brewing chamber lid. By pressing the cappuccino button (I), freshly frothed milk automatically flows into the cup followed by the coffee. Your cup is ready when the cappuccino signal is no longer lit. You can now prepare another cup. To use a different soluble coffee for your cappuccino instead of the coffee in the coffee container, choose the manual cappuccino mode and proceed as follows: Open the brewing chamber lid (P) and fill in milk. First press the manual button (H), then the cappuccino button (I) (see VII). Frothed milk flows into the cup. Open the brewing chamber lid again and insert the coffee of your choice, according to the dosage indicated on the coffee packaging. Press the cup button (K). Please note: To remove traces of milk, remaining in the brewing unit, always rinse it after using milk. In case you want to use instant cappuccino or other instant beverages containing milk powder, please note that some residue can remain in the brewing unit and need to be removed. Tea Follow steps 1. and 2. and switch the coffee/water selector (Q) to the water position. The water signal (F) becomes visible. Then place a tea bag in your cup and press either the cup (K) or mug (J) button. Using the manual mode, you can also prepare soluble tea. Fill the instant tea into the brewing unit, close the lid, press the manual button (H) and then the cup (K) or mug button (J).

Preparing Hot Beverages

1. Rinse and fill the water tank with fresh, cold drinking water and place your cup on the drip tray (N). Ensure you choose the right cup size to avoid overflowing. Cup: 80 ml 125 ml Mug: 125 ml 220 ml Cappuccino: 160 ml 210 ml 2. The liquid content selector (M) is set on min and can be adjusted to suit larger cup sizes. Ensure that the coffee/water selector (Q) is in the coffee position. 3a. Auto Mode (see V) Adjust the coffee strength selector (R) between 1 (= mild) and 8 (= strong). For your first cup of Nescaf Gold Blend we recommend you start with setting 2.5. Then press the cup (K) or mug (J) button. 3b. Manual Mode (see VI) The manual mode allows you to use a different coffee from the one in the coffee container. Open the brewing chamber lid (P) and insert the coffee of your choice, e.g., Nescaf Decaffeinated according to the dosage indicated on the coffee packaging. Be careful not to overfill the brewing unit (maximum 30 g). Select the manual button (H) first, then press the cup (K) or mug (J) button. The cup or mug signal lights up indicating that coffee preparation is in process. Your cup is ready when the signal is no longer lit. Now, you can prepare another cup. The flashing power/stand-by signal indicates that the integrated ventilator is running. When it lights up continuously, the machine has switched to the energy saving stand-by mode. Please do not switch off the machine earlier. 14

Tips for the Perfect Cup

If you change the coffee you use in the container, check the coffee strength setting as this may vary between different coffees. If the machine has not been used for a longer period of time (2-3 weeks), rinse and refill the water tank (C), rinse the interior of the machine and check whether you may want to exchange the remaining coffee in the container (A) before using it the next time. To ensure best coffee quality, Nescaf Nescup by Braun has been optimised for use with the premium Nescaf Gold Blend. For best results we recommend always using filtered water.
3150350_Nescup_S6-24 Seite 15 Donnerstag, 6. Oktober 2005 3:05 15
Clean and descale the machine regularly (see sections Cleaning and Descaling).

Water Filter

Braun Nescaf Nescup is equipped with a water filter that filters unfavourable chemicals out of the water to improve the quality of your beverage significantly. Moreover, it protects your machine against scale build-up and extends its lifetime. The water filter should be replaced regularly (approx. after 50 l of water have run through). When the water filter exchange signal (E) lights up, you need to replace the water filter to ensure best quality of your coffee. To insert the water filter cartridge, proceed as follows: Unpack the water filter cartridge, and immerse it in a large glass or cup filled with water for 10 minutes. Remove the water tank. Switch the coffee/water selector (Q) to the water position and place a cup on the tray to capture potential water spill. Open the water filter compartment (B) and insert the new water filter by firmly pressing it down. To reset the water filter exchange signal, press the stop button (D) for 5 seconds. Empty the cup if needed, place it back on the drip tray and press the mug button (J). After brewing has stopped, empty the cup and repeat twice more.
Remember to replace the seal (V) when reassembling the brewing unit (U). Ensure that all parts are completely dry before re-assembly. When re-inserting the brewing unit, ensure it is firmly inserted by pressing against its back panel. Coffee Container Disassemble the coffee container (A) and clean the glass either with a dry cloth or in hot water (see X). The other parts should be wiped with a dry cloth or paper towel. After cleaning the coffee container make sure it is completely dry prior to re-filling with instant coffee. Otherwise, the coffee powder may congeal and block the machine. If the lid of the coffee container is blocked with caked coffee, disassemble it by taking out the stopper, turning the ring left and pulling out the piston (see IX, 14). Remove the rubber sealing ring to avoid it from getting wet. Clean all other parts with hot water and ensure everything is dry before reassembly. Especially the rubber sealing ring needs to be completely dry. In case of doubt, use one of the spare sealing rings. Machine Exterior Never clean the machine under running water and never immerse it in water. Only use a clean kitchen towel for cleaning. If necessary, you may use some washing-up liquid. When moving the machine, remove the water tank (C) from the unit first. Clean the water tank (C) regularly. To avoid scratching use a soft cloth soaked in vinegar and water.

Rinsing

Rinse the machine daily before the first cup. Place an empty cup on the drip tray (N). Ensure that the coffee/water selector (Q) is in the coffee position. Press the manual button (H) without adding any instant coffee and press the mug button (J).

Descaling

If you are using a water filter the cup, mug, cappuccino and manual signals light up simultaneously to indicate that descaling is necessary (ca every 300l). If you are not using a water filter you need to descale the machine more often (ca every 100l). The red water filter exchange signal lights up every 50 l and you can use this as a reference and descale every second time it lights up. The descaling process works in 4 phases. After each step the blinking cup, mug, cappuccino and manual signals will show you that you need to initiate the next phase: 1. Remove the water filter from the appliance and ensure the brewing unit is in place. 15

Cleaning

Always unplug the machine before cleaning. Clean the detachable parts of the brewing unit daily after your last cup of the day and always after milk has been used: Remove the brewing unit (U) by pulling it towards you (see VIII). Detach the coffee pipe (X) and the brewing mechanism lid (W) by unscrewing it from the brewing unit (U). Remove the seal (V). Clean all parts with hot water and washing-up liquid. Alternatively, the brewing unit can be cleaned in the dishwasher.
3150350_Nescup_S6-24 Seite 16 Donnerstag, 6. Oktober 2005 3:05 15
Dissolve descaling agent in 1.7 l water and fill this mixture in the water tank (C) up to max. Please use 50 g of a descaling powder based on amidosulphonic acid and citric acid. Remove the drip tray (N) and position a kitchen container in its place (capacity 2 litres or more). Ensure that the coffee/water selector (Q) is in the water position. Press the stop button (D) and keep it depressed while pressing the manual button (H). The unit will start the descaling cycle. During the whole descaling process power/stand-by signal is flashing and the water filter exchange signal is lit permanently. 2. After approx. 20 minutes, the process stops and the cup, mug, cappuccino and manual signals will blink. You need to switch the coffee/water selector to the coffee position. In the coffee position, the above sequence is repeated again until the tank (C) is empty.

3. Then the cup, mug, cappuccino and manual signals will blink again. Empty the kitchen container and place it back underneath the pipes. Clean the water tank (C) and refill it with fresh, cold water up to max. To start the automatic rinsing cycle of the water pipe switch the coffee/water selector to the water position. 4. When the cup, mug, cappuccino and manual signals blink again, start the automatic rinsing cycle of the coffee pipe by switching the coffee/water selector to the coffee position. A manual coffee cycle is run every 2 minutes until the tank (C) is empty. The descaling process is finished when the power/stand-by signal is permanently lit.

Troubleshooting

Problem The machine runs out of water during brewing. Nothing happens when the cup button (K), mug button (J) or cappuccino button (I) is pressed. Cup lights are blinking one after the other. Situation Water tank (C) is empty. Quantity in cup lower than normal. No beverage delivery. Solution Fill the water tank (C). Press the cup/mug or cappuccino button to start a new coffee. Make sure that the unit is plugged in, switched on and the water tank (C) is full. Check if liquid remains inside the brewing unit. If yes, press cup button (K) until empty. Then press the stop button to reset. Proceed as per section Preparing Hot Beverages. 1. Disassemble the coffee container (A) and clean the lid (see Cleaning Coffee Container). Disassemble and clean the brewing unit (U). 2. Remove the brewing unit and the coffee container. Then remove the dosing tube (Y) and clean it in hot water. Ensure all parts are completely dry before reassembly.
Brewing process has been interrupted.
Coffee is too weak even if coffee selector is in max strength or only hot water is coming out.
1. Coffee container is blocked. 2. Dosing tube (Y) is blocked.
3150350_Nescup_S6-24 Seite 17 Donnerstag, 6. Oktober 2005 3:05 15
Problem Machine does not produce coffee, only hot water is coming out. The water signal is lit. The water signal (F) is blinking.
Situation Coffee/water selector (Q) not in correct position.
Solution Turn the coffee/water selector (Q) to coffee and make sure that the coffee container (A) is firmly inserted in the machine. Ensure there is enough water in the tank (C). The signal disappears when any of the cup buttons is pressed. Press the stop button (D). The cup lights are blinking one after the other and the machine stops immediately. Press the cup button (K) until the brewing unit (U) is empty. Change the water filter (see Water Filter) then press the stop button (D) for 5 seconds to reset the signal. Descale the machine (see Descaling). Coffee residue can be removed using a vacuum cleaner or another dry cleaning method. Contact an authorised Braun service centre.

Water tank (C) is empty or it is not firmly inserted in the machine. I realise that my cup is too small for my desired drink.
I need to stop the preparation process. How do I empty the brewing unit (U)?
The water filter exchange signal (E) lights up.
The signal is a reminder to change water filter.
All cup signals are lit. Coffee has spilt over the machine. All the lights are blinking.
Machine is calcified. I have spilt dry coffee over the machine. Error detection.
If you cannot find a solution to your problem, please contact Braun customer service.

Transport

The machine must be completely empty before carrying it. Never attempt to empty the machine immediately after preparation. Allow unit to cool down for 20 minutes first. Remove the water tank (C), the drip tray (N) and the coffee container (A). Carry the unit to a sink. Switch the coffee/water selector (Q) to the water position. Open the water filter compartment (B) and remove the water filter (L). Tip the machine onto its rear right-hand corner to allow the water to pour into the sink through the water filter compartment (B). Move the machine back into its vertical position. Water will run out of the machine through the pure water pipe (O). Repeat these steps until no more water runs out. This product conforms to the European Directives EMC 89/336/EEC and Low Voltage 73/23/EEC. Please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country.
3150350_Nescup_S6-24 Seite 18 Donnerstag, 6. Oktober 2005 3:05 15
Guarantee We grant 2 years guarantee on the product commencing on the date of purchase. Within the guarantee period we will eliminate, free of charge, any defects in the appliance resulting from faults in materials or workmanship, either by repairing or replacing the complete appliance as we may choose. This guarantee extends to every country where this appliance is supplied by Braun or its appointed distributor. This guarantee does not cover: damage due to improper use, normal wear or use as well as defects that have a negligible effect on the value or operation of the appliance. The guarantee becomes void if repairs are undertaken by unauthorised persons and if original Braun parts are not used. To obtain service within the guarantee period, hand in or send the complete appliance with your sales receipt to an authorised Braun Customer Service Centre. For UK only: This guarantee in no way affects your rights under statutory law.
3150350_Nescup_S6-24 Seite 19 Donnerstag, 6. Oktober 2005 3:05 15

3150350_Nescup_S6-24 Seite 20 Donnerstag, 6. Oktober 2005 3:05 15
Kuwait Union Trading Company, Braun Service Center, P. O. Box 28 Safat, Safat Code 13001, Kuwait, Latvia Latintertehservice Co., 72 Bullu Street, House 2, Riga 1067, Lebanon Magnet SAL - Fattal HLDG, Sin EL Fil Jisr EL Wati Beirut, +Lithuania Elektronas AB, Kareiviu 6, LT 2600 Vilnius, 17 Luxembourg Sogel S. A., Rue de lindustrie 7, L-2543 Windhof, Malaysia Exact Quality Lot 24 Rawang Housing & Industrial Estate Mukim Rawang, PO No 210 48,000 Rawang Selangor Malaysia (603) Malta Kinds, 287, Republic Street, Valletta VLT04, 18 Morocco FMG depot TMTA Rue Chefchaouen, Oukacha Casablanca +69 Martinique Decius Absalon, 23 Rue du Vieux-Chemin, 97201 Fort-de-France, 15 Mauritius J. Kalachand & Co. Ltd., DBM Industrial Estate, Stage 11, P.O.B. 634 Plaine Lauzun, Mexico Braun de Mxico y Cia. de C.V. Calle Cuatro No.4, Fraccionamiento Industrial Alce Blanco, Naucalpan de Jurez, Estado de Mxico. C.P. 53370 01-800-508-58-00 Nederland Gillette Groep Nederland BV, Visseringlaan 22, 2288 ER Rijswijk, 0 800-88 Netherlands Antilles Rupchand Sons n.v. (rams), Front Street 67, P.O. Box 79 St. Maarten, Philipsburg 31
New Zealand Key Service Ltd., 69 Druces Road., Manakau City, 09 - 38 Nippon Gillette Japan Inc., Queens Tower, 13F 3-1, Minato Mirai 2-Chome Nishi-Ku, Yokohama 220-6013 Japan 045-00 Norge Gillette Group Norge AS, Nils Hansensvei 4, P.O. Box 79 Bryn, 0667 Oslo, 022-10 Oman ( Sultanate of ) Naranjee Hirjee & Co., 10 Ruwi High, P.O. Box 9, Muscat 113, Pakistan Gillette Pakistan Limited, Dr. Ziauddin Ahmend Road, Karachi 74200, Paraguay Paraguay Trading S. A., Avda. Artigas y Cacique Cara Cara, Asuncin, 21203350-48/46 Philippines Gillette Philippines Inc., Corporate Corner Commerce Avenues 20/F Tower 1, IL Corporate Centre 1770 Muntinlupa city 02-771071 02-06/-16 Poland Gillette Group Poland Sp. z o.o. ul. Domaniewska 41, 02-672 Warszawa, Portugal Grupo Gillette Portugal, Lda., Braun Service, Rua Toms da Fonseca, Torre G - 2 A, 1600-209 Lisboa, Runion Dindar Confort, Rte du Gymnase, Boite Postale 278, 97940 St. Clotilde, Romania Gillette Romania srl. Calea Floreasca nr. 133-137 et 1, sect 1, 714011 Bucuresti 01-2319656 Russia RTC Sovinservice, Rusakovskaya 7, 107140 Moscow, (095) 61

Saudi Arabia AL Naghi company AL Madinah road opposite to Fetihi center, Al Forsan P.O. Box: Jeddah 02 - Schweiz /Suisse/Svizzera Telion AG, Rtistrasse 26, 8952 Schlieren, 0844-10 Serbia/Montenegro BG Elektronik, Bulevar Kralja Aleksandra 34, 11000 Beograd, 030 Singapore (Republic of) Beste (S) Pte. Ltd., No. 6 Tagore Drive, # 03- 04 Tagore Industrial Building, Singapore 787623, (65) Slovakia Techno Servis Bratislava Trhov ul. Bratislava IV 02 /Slovenija Iskra Prins d.d. Cesta dveh cesarjev Ljubljana, 00 South Africa (Republic of) Fixnet After Sales Service, 159 Queen Street, Kensington South, P.O. Box 751770, Johannesburg 2094, Kensington South, 6765 St. Maarten Rupchand Sons n.v. (rams), P. O. Box 79, Philipsburg, Netherlands Antilles, 31 St. Thomas Boolchands Ltd., 31 Main Street, P. O. Box 5667, 00803 St. Thomas, US Virgin Islands, 0302 Suomi Gillette Group Finland Oy, P.O. Box 9, Niittykatu 8, PL 9, 02200 Espoo, 09-71 Sverige Gillette Group Sverige AB, Dept. Sweden, Stockholm Gillette Rsundavgen 12, Box 702, 16927 Solna, 020-21 Syria Ahmed Hadaya Company Hadaya building Ain Keresh Unisyria, P. O. Box 35002, Damascus, 963 011-231433
3150350_Nescup_S6-24 Seite 21 Donnerstag, 6. Oktober 2005 3:05 15
Taiwan Audio & Electr. Supplies Ltd., Brothers Bldg., 10th Floor, 85 Chung Shan N Rd., Sec. 1, Taipei (104), (886) 3283 Thailand Gillette Thailand Ltd., 175 South Sathorn Road, Tungmahamek, Sathorn, 11/1 Floor, Sathorn City Tower Bangkok 10520 (66) 2344 9191/ Exten. 9135 Tunesie Generale dEquipement Industr., (G.E.I.) 34 rue du Golfe Arabe, Tunis, 2000, 80 Turkey Gillette Sanayi ve Ticaret A.S., Polaris Is Merkezi, Ahi Evran Cad., No:1, 34398 Maslak, Istanbul, 0212-85 Ukraine Importbytservice-Ukraine Hlybotchytska str.53, Kyiv 380-44-417-24-15 United Arab Emirates The New Store LLC, Burjman shopping mall, Bur Dubai Dubai, +Uruguay Driva S. A., Marcelilno Sosa 2064, 11800 Montevideo, USA The Gillette Company Braun Consumer Service, 1, Gillette Park 4k-16, Boston, MA 02127-1096, 1- 800 -272 - 8611 Venezuela Gillette de Venezuela S.A., Av. Blandin, Centro San Ignacio Torre Coprnico, Piso 5 La Castellana, Caracas 0800-4455388 Yemen ( Republic of ) Saba Stores for Trading, 26th September Street, P. O. Box 5278, Taiz, 4-88

For latest updates, please refer to www.Braun.com.