Here you can find all about Breil YM62 like manual and other informations. For example: review.
Breil YM62 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Breil YM62 please write about it to help other people. [ Report abuse or wrong photo | Share your Breil YM62 photo ]
Breil YM62, size: 512 KB
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
A MAIN COMPONENTS.2 B FEATURES.3 C SETTING THE TIME AND ADJUSTING CHRONOGRAPH HAND POSITION.4 D SETTING THE DATE.8 E CHRONOGRAPH.9 F ALARM.11 G TACHYMETER.14 H TELEMETER.15 I PRECAUTIONS AND USEFUL INFORMATION.16 L TECHNICAL DATA.20
A MAIN COMPONENTS
Hour hand Minute hand Small second hand Chronograph minute hand Chronograph 1/5 second hand Alarm hour hand Alarm minute hand Date Button Button Crown
[TIME] indicated by hour, minute and small second hands. [DATE] displayed in numerals
[CHRONOGRAPH] measures up to 60 minutes in 1/5 second increments. split time measurement
[ALARM] the alarm can be set to ring only once at the designated time within the coming 12 hours
Crown : (1) normal position (2) first click (3) second click
: free : date setting : time setting, adjusting the chronograph hand position and the alarm hand.
C SETTING THE TIME AND ADJUSTING CHRONOGRAPH HAND POSITION
This watch is so designed that the time setting, the alarm hand adjustment and the chronograph hand position adjustment are all made with the crown at the second click position (2). Once the crown is pulled out to the second click, be sure to make all the adjustments at the same time. [Time setting] Hour hand Minute hand
Small second hand
1. Unscrew the crown and pu it out to the second click when the small second hand is at the 12 oclock position. The cronograph is automatically reset to 0.
2. Turn the crown to set the hour and minute hands. It is recommended that the hands be set to the time a few minutes ahead of the current time, taking into consideration the time required to adjust the chronograph hand position if necessary. 3. If the alarm has been set and the crown is pulled out to the second click, the alarm hands will turn to indicate the current time. Note: When setting the hour hand, be sure to check that AM/PM is correctly set. The watch is so designed that the date changes once in 24 hour. When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and than turn it back to the exact minute.
[Alarm hands setting] 1. Press button to set the alarm hands to the time the main time hands indicate. * The alarm hands move quickly if button is kept pressed
Minute hand Hour hand
Alarm hour hand
Alarm minute hand
[Chronograph hands setting] If the chronograph hands are not in the 0 position, follow the procedure below to set them to the 0 position: Chronograph minute hand Chronograph 1/5 second hand
1. Press button for 2 seconds. *The selected minute hand turns a full circle. 2. Press button repeatedly to reset the chronograph hands to 0. The hands move quickly if button is kept pressed. 3. Press button for 2 seconds. *The chronograph 1/5 second hand turns a full circle. 4. Press button repeatedly to reset the chronograph 1/5-second hands to 0. The hands move quickly if button is kept pressed.
The alarm and chronograph hands can be readjusted in the following order by pressing button for 2 seconds:
Alarm hands *The alarm hands advance 12 hours
Chronograph minute hand *The chronograph minute hand turns a full circle
Chronograph 1/5-second hand *The chronograph 1/5-second hand turns a full circle
* After all adjustments are completed, push the crown back in to the normal position in accordance with a time signal, checking that the main time and the alarm hands indicate the same time. * Push the crown back in to the normal position in accordance with a time signal.
D SETTING THE DATE
Before setting the date, be sure to set the time.
1. Pull out the crown to the first click. 2. Turn the crown clockwise until the desired date appears. 3. Push the crown back in to the normal position. Note: Do not set the date between 9:00 p.m.and 01.00 a.m. Otherwise the date may not change properly 1. It is necessary to adjust the date at the end of February and 30-days months. 2. Do not set the date between 9:00 p.m.and 01.00 a.m. Otherwise the date may not change properly. 3. Do not press button when the crown is at the first click position as this will move the alarm hands.
The chronograph can measures up to 12 hours in 1/5-second increments. When the measurement reaches 12 hours, the chronograph automatically stops counting.
Chronograph minute hand
Chronograph 1/5-second hand
Before using the chronograph, be sure to check that the crown is set at the normal position and that the chronograph hands are reset to the 0 position. To reset the chronograph hands to the 0 position, follow the procedure in Chronograph hands setting. CHRONOGRAPH OPERATION [Standard measurement]
[Accumulated elapsed time measurement]
Restart and stop of chronograph can be repeated by pressing button .
[Split time measurement]
Measurement and release of split time can be repetead by pressig button .
[Measurement of two competitors]
Finish time of 1st competitor
2nd competitor finishes
Finish time of 2nd competitor
The alarm can be set to ring only once at a designated time within the coming 12 hours. The alarm time can be set in one minute increments.
[Alarm time setting] Before using the alarm, check that the alarm hands are adjusted to the current time. For further information, see [Setting the time and adjusting chronograph hand position].
1. Pull out the crown to the first click. 2. Press and hold button to set the desired alarm time. * * The alarm hands move quickly if button is kept pressed 3. Push the crown back in to normal position. Note: The single time alarm cannot be set to a time more than 12 hours ahead of the current time. While you keep button pressed to advance the alarm hands quickly, they stop when they indicate the current time and the alarm is disengaged. In this case, release button and then press and hold the button again to set the alarm hands to the desired time. When the crown is at the normal position, the alarm hands indicate the current time when the alarm is disengaged and the designated alarm time when it is engaged.
[How to stop the alarm] At the designated time the alarm rings for 20 seconds and it is automatically disengaged as it stops. To stop it manually, press button or. While the chronograph is measuring, the alarm rings differently than usual. While the alarm is ringing, pressing button or will only stop the alarm and no chronograph operation can be made. [How to cancel the alarm time you have set] 1. Pull out the crown to the first click. 2. Press and hold button until the alarm hands stop and indicate the current time. 3. Push the crown back in to normal position. To change the alarm time, follow the procedure in [Alarm time setting].
The Tachymeter is used to measure the speed of a vehicle. By knowing how many seconds the vehicle to travel one kilometre, the tachymeter can measure the approximate average speed in km/h during a journey (over a maxinum measurable time of 60 seconds). If the chronograph is started at the same time as the start of the distance measurement, and stopped after 1km, the average speed can be calculated from the position of the second hand. If the vehicle covers the distance one km in 45 seconds, the approximate average speed is 80 km/h.
* Not available on all models
The Telemeter is a distance indicator which allows distance to be calculated on the basis of the speed of sound. It is useful, therefore, for aviation, navy, army and artillery purposes. It can also measure how far away a thunderstorm is. The hand is started the second a flash, smoke or lightning is seen and stopped when the actual sound is heard. The distance, from 1 to 20 kilometres, between the observer and the explosion or storm is read from the telemetry scale.
* Not available on all models.
PRECAUTIONS AND USEFUL INFORMATION
Case Spray, sweat, light rain, washing, etc. Swimming, etc.
Degree of water resistance
A B C D E
WATER RESISTANT 30M (3ATM) WATER RESISTANT 50M (5ATM) WATER RESISTANT 100M (10ATM) WATER RESISTANT 200M (20ATM) or more
WATER RESISTANT WATER RESISTANT WATER RESISTANT WATER RESISTANT
NO YES YES YES YES
NO NO YES YES YES
WATER RESISTANT may sometimes be abbreviated to WATER RESIST
- In order to prevent water coming into contact with the internal mechanism, never pull the crown out when the watch is wet. - If any watches designed for sportswear or use in water come into contact with salt water or heavy sweating, they should be rinsed in fresh water and dried thoroughly.
Skin-diving Scuba diving Water-resistance characteristics
NO NO NO YES YES
NO NO NO NO YES
Not water resistant. Must be kept away from water and moisture Average water resistance. Can withstand spray, sweat, light rain, washing, etc. during daily use Can be worn while swimming but not diving Suitable for skin-diving. Suitable for scuba diving. * Full tighten crown screw lock.
* Always keep the crown in its normal position.
- Contact with water may cause a deterioration in the quality of some leather straps. - As internal parts of the watch can retain moisture, when the outside temperature is lower than the inside, the watch glass may mist-up. This phenomenon is purely temporary and should not create any problems. However, if it persists for any length of time, the watch should be checked by the shop where it was purchased or by the nearest Authorised Service Centre.
Temperature Do not leave the watch exposed to direct sunlight or temperature extremes for long periods of time. Long exposure, in fact, may adversely affect the operation of the watch and actually shorten battery life, causing it to gain or lose time and affect its other functions. Impact This watch can withstand normal everyday impacts and shocks and those normally imparted by non-contact sports. Serious damage, however, may result if the watch is dropped or subjected to severe shock. Magnetic fields This watch is antimagnetic up to 60 gauss, and is therefore not affected by magnetic fields produced by normal domestic appliances. If used near strong magnetic fields, its operation may be temporarily affected. Static electricity The integrated circuits present inside the watch are sensitive to static electricity. If the watch is exposed to intense electrical fields, the time display may temporarily lose some of its accuracy. Chemicals and gases Avoid wearing the watch in the presence of strong gases or chemical substances. Parts of the watch may discolour, dissolve or even break if brought into contact with benzol or petroleum based products such as solvents, thinners, detergent, adhesives etc. Pay special attention to avoiding contact with chemicals.
The watch case and strap may discolour if they come into contact with mercury from a broken thermometer or other equipment. Keeping the watch clean Use an absorbent soft cloth to clean off any dirt or damp from the watch glass. Wearing the watch when the strap or back of the case is dirty can cause skin irritation. Cleaning the watch strap: Metal bands: use a toothbrush and soapy warm to wash the dirt off. Plastic or rubber straps: wash with water. Do not use solvents. Leather straps: gently rub the face of the strap using a soft dry cloth. Clean the opposite side with a cloth and alcohol. Periodic inspection In order to guarantee long trouble-free operation, it is advisable to have the watch checked by an Authorised Assistance Centre once every two years. Keep batteries out of the reach of children If a battery is accidentally swallowed, consult a doctor immediately
Motor 2HG 59294 KDL-32J5000 Ellipse 500 Polaroid X530 Pinkie PIE CDA-9857R CDC A071 Review 7040-1W Live Plus XL2370 50 RTS GT-C5010E Asus T500 26PF5321 12 Wd-52825 Navirad GPS Sensor RTS E-300 32LH20 MDX-M870X The Pain Sierra 91 1125C MHS-PM5k P CC-CD100N 300 GPS 4-incubation Sheet YZF-R6 99 943BX DVR 2500 Befn2PS4 Microtower PC JD-N51CW AR-M276 AV 500 FJ1200 BU-200 Juno-stage CN 3013 Series Airpcap D3122XL VGN-FS215B DVR-70 LE32A551p2R 4X4-2001 Atas-25 Adapter NX9020 SR-S584DP 72187300 Beta 57A RMV201 ESL66010 IA5878 29GX1899-78R Treo 600 GSX-R600 N600C Combitrim LA40S81B RM-VL1000 98stm-A HV5900 BDV-IT1000 Capcom 2 Samreport-lite 2006 Matrix 12 941MW Trainer Game BK705 775N-CB775bn- 7 0 32PFL5522D Fridelys Emachines 308 SW DES-3828P - 2002 SA-WM500 DLE5977W CDC 926 DF030DWE LF-PK20 Boss ME-8 Addendum Tour 06 3crusb10075 SB3100 CP220 Travelmate-C310 SL70RC Plus HD-56G787 VGP-prtt1 SCH-W390 Prophecy Drive Black ASH
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101