Reviews & Opinions
Independent and trusted. Read before buy Briggs Stratton 130299!

Briggs Stratton 130299

Manual

Download (English)
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Briggs   Stratton 130299About Briggs Stratton 130299
Here you can find all about Briggs Stratton 130299 like manual and other informations. For example: review.

Briggs Stratton 130299 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Briggs Stratton 130299 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Briggs Stratton 130299 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 4. Page 1 of 1. Average Rating:
bgurley 9:07am on Thursday, August 26th, 2010 
Xerox Color Laser Review Printer is a very nice choice for personal or small business use. The images are printed out very nice in color.
kaiser12277 2:01am on Wednesday, June 9th, 2010 
Great Printer - Expensive Toner I love this printer, but the toner is killing me. This "5%" idea is stupid. No one uses just 5% per sheet.
charmermmshop 6:22am on Monday, May 17th, 2010 
OK home printer With the first print, it was easy to see that the colors were not lined up. Took about an hour to get them close enough. Great for an office or home I am awarding this printer 5 stars for its ease of installation, quality of output, quality of workmanship.
coolaldred 11:31am on Monday, April 12th, 2010 
I use 4 different printers at work, all of them HP (which I consider the standard for professional requirements).

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

For SAE Baja Only
Initial engine set-up instructions for Briggs & Stratton engine model 205432-0036-E1 to be used for SAE Baja.
The above SAE kit (part number 695221) is supplied with each SAE engine. These parts are required to be mounted on the engine to assist the throttle to return to an idle, additionally the kit aids in the installation of a cable operated throttle control. The following instructions will assist you in preparing your engine for the SAE Baja competition.

SAE Baja

11/17/2006
Remove trim panel. First turn fuel valve to the off position. Then remove 3, 5/16 hex head screws, two are located on the front of the engine and one is located on the side of the engine.
Remove tankmounting screws (4)
After the trim panel is removed, remove the fuel tank by removing 4, 3/8 hex headed shoulder bolts from the base of the fuel tank. Two screws are located on the front and two screws are located on the back of the fuel tank base.
When the fuel tank is removed the following steps need to be accomplished. 1. Install throttle return spring from SAE kit. 2. Loosen throttle arm for friction free movement. 3. Reposition governor spring to hole #6. 4. Remove ground wire from stop switch so engine will not shut off at idle.
View showing engine controls with fuel tank removed.
Loosen throttle arm friction nut.
Move governor spring to hole #6
Install throttle return spring from SAE kit
Remove ground wire from stop switch.
Install throttle return spring from the SAE kit. Next loosen throttle control arm nut until the throttle control arm moves freely. This will allow the throttle control arm to freely move back to the idle position by the spring tension. Remove ground wire from the stop switch so engine will not shut off at idle. Re-route this ground wire to your safety stop switch on the vehicle. (Refer to SAE rules) Reposition governor spring to hole #6. This allows for better governor response.
Close up of the governor spring relocated to the #6 hole, on the governor control bracket. All engines are required to have the governor spring located in #6 hole
Reinstall fuel tank and trim panel back on to the engine.
For SAE Baja Only After trim panel has been re-installed the speed control cable clamp from the SAE kit can be installed on to the speed control level with the E ring retainer holding the clamp from underneath.
Replacement Parts listing for the SAE kit 695221. Part Number 691024 Description Throttle Return Spring Cable Clamp Block E-Ring Retainer Screw for Cable Block Cable Casing Clamp Qty. 1
Always consult engine operating & maintenance instructions manual and engine repair manual for specific values and procedures. To locate Briggs & Stratton service dealers or download engine parts or operating & maintenance instructions manuals please contact: 1-800-233-3723 or www.briggsandstratton.com

doc1

525-200

525-209

221995

Carburetor Float For 6, 7 & 8 Hp engines with round cartridge lter and main jet on side of bowl. Size: 2-1/8 OD X 1-5/16 ID X 13/16 HT

525-208

298514 692265
Carburetor Float Bowl For 14, 17 and 19 CID vertical shaft engines with one-piece o-jet carburetors. Fits models 146700 and 170700. Also ts Kohler Carb models K341 etc Measures: 2.321 OD X 1.280 HT, Hole: 3/8 ID
Carburetor Float For 7 Hp engines with oblong lter and manual choke 400 series 17 - 18 Hp twin cylinder. Size: 2-3/8 OD X 1-9/16 ID X 13/16 HT

525-219

495933

525-899

299707
Carburetor Float Bowl Assembly Fits Walbro carburetors on 19 and 28 CID engines. Measures: 1.950 OD X 1-5/16 HT, Hole: 5/16 ID

525-235

Carburetor Float For 6 thru 12 Hp engines. Size: 1-31/32 OD X 63/64 ID X 9/16 HT

493640

Walbro 20-141 Walbro 20-141-1

614-404

398187

B&S 75-570

Carburetor Float For Briggs & Stratton and Lawn Boy engines with Walbro carburetors. Fits Walbro carburetor models LMJ, LMK & LMR series carburetors. Size: 1-17/32 OD X 21/32 ID X 21/32 HT
Carburetor Float Bowl Fits B&S 93300 series engines; also replaces Walbro 20-141 & 20-141-1. Fits Walbro LME carburetors. Fits Briggs & Stratton and Lawnboy. Measures: 1.850 OD X 1 HT, Hole: 3/8 ID

485-184 NEW

281165S

525-217

494381
Carburetor Bowl Gasket for Briggs and Stratton. Fits larger carburetor bowls.
Carburetor Float Fits 17 and 19 CID horizontal shaft engines.

(While Quantities Lasts)

525-840

398188

525-558

/ 691824

Lawnboy# 300096 Tecumseh# 27106 Toro# 92-6389
Needle & Seat For Max and Quantum engines using Walbro LMS1, 3 and 10 series carburetors. Fits models 83400, 90700, 91700, 99700, 100700, 110700, 111700, 114700 and 121700 thru 126800.
Carburetor Float Pin Found on Briggs, Lawn Boy, Tecumseh and Toro equipment. Size: 3/32 OD X 15/16 Long

525-018

494788
Needle & Seat Fits Walbro carburetors.

525-944

231855S

490-011

260877
Needle Valve For Walbro carburetors. Fits models 286402, 286707, 289707, 28B702, 28B707, 28M707, 28N707, 28N777 and 28P777. For 10, 10.5, 11.5, 12.5, 13, 14 & 15 Hp (28 CID) vertical shaft engines.
Governor Spring (3200 - 3400 RPM), Fits 92500, 92900 & 110000. Coil Length: 2-1/16 X 2-5/8 Overall
(While Quantities Last) (Sold in multiples of 10)

525-901

394682

490-045

260703
Float Valve and Seat For 7 thru 18 Hp engines. Fits models 170400 thru 195400, 200400 thru 256700, 280700, 281700, 326430, 42A707, 42A777, 42A777, 42D707, 42E707, 42E777 & 460777, if equipped with push in brass seat.
Governor Spring (3300 RPM) Fits 100900 and 120900. Coil Length: 19/32 X 4 Overall

490-052

260711

525-014

293478
Float Valve and Seat For 3 and 5 Hp horizontal engines.(Updraft carburetors) Fits models 80700, 130400, 132400 and 817900.
Governor Spring Fits 100900 and 130900 Coil Length: 3/8 X 3-7/8 Overall

490-078

692205 260041

525-063

299096 394681
Float Valve and Seat For most 7 thru 18 Hp engines. Fits models 170400 thru 422700, 190400 and 254400. Includes viton and steel tipped needles
Governor Spring Fits 60100, 61100, 80100 and 81100 Coil Length: 9/16 X 2-1/16 Overall

490-086

260695

525-006

293962 297102
Governor Spring Fits 100200 and 130200 Coil Length: 1/2 X 1-3/16 Overall
Float Valve and Seat For models 140000, 170000, 190000 and higher. Viton-tipped style

490-102

691798 261306

527-507

261027
Governor Link Fits model (link), Measures: 1-11/16 overall length
Governor Spring Fits 190700, 191700 and 192700 Coil Length: 5/8 X 1-1/8 Overall

490-185

260029

525-071

260878
Governor Spring Fits 110700. Coil Length: 7/8 X 2-9/16 Overall
Governor Link Fits most 3, 3-1/2, 4 and 5 Hp engines. Measures: 1-3/4 overall length

490-250

490-003

260875

692207 260584
Governor Spring (3400 - 3600 RPM), Fits 92500, 92900 and 110000, Coil Length: 2-1/16 X 2-5/8 Overall (Sold in multiples of 10)
Governor Spring Fits 280700 and 281700 Coil Length: 3/4 X 6-1/2 Overall

490-7733 690480

260871
Governor Spring Fits 194700 - 194799 (8 Hp models) Coil Length: 1/2 X 1-5/32 Overall

490-7736 691832

262505 262604
Governor Spring Fits 260700 - 260799 and 261700 - 261799 (14 Hp Vanguard) Coil Length: 11/16 X 1-7/8 Overall (Sold in multiples of 10)

490-7737 262656

Governor Spring Fits 124700 - 124799 (5 Hp Quantum) Coil Length: 7/8 X 2-3/16 Overall

490-7742 805460

Governor Spring Fits 303700 - 303799 and 350700 - 350799 (16 Hp Vanguard & 18 Hp) Coil Length: 7/16 X 1-15/16 Overall (Sold in multiples of 10)

490-7738 691833

262664

490-7734 690558

262351
Governor Spring Fits 126700 - 126799 (5 Hp IC Quantum models). Coil Length: 3/4 X 2-3/16 Overall
Governor Spring Fits 422700 - 422799 (18 Hp IC Vanguard models). Coil Length: 3/4 X 1-7/8 Overall (Sold in multiples of 10)

490-180

260025

490-7739 691276

262678
Governor Spring Fits 6BH-S (on type #900060 & up) 6050060500, 80500 (with manual choke) Coil Length: 3/4 X 1-3/4 Overall (Sold in multiples of 10)
Governor Spring Fits 99700 - 99799 (5 Hp Europa models) Coil Length: 3/4 X 2-3/16 Overall

490-179

260591

490-7740 262759

692211
Governor Spring (3400 - 3600) Fits 60900 thru 60907 and 61900 thru 61907 Coil Length: 2-3/16 X 2-5/8 Overall (Sold in multiples of 10)
Governor Spring Fits 96900 - 96999 (3.5 Hp Sprint & Classic). Coil Length: 1-3/16 X 2-29/32 Overall

490-060

691599 26925

490-7735 262572

Governor Spring Fits 104700 - 104799 (5 Hp Vanguard) Coil Length: 1/2 X 1-5/8 Overall
Governor Spring Fits 6B, 8B, 8BH-A (w/carb #294348 only) 60300, 60700 (on type #907133) 80300 Coil Length: 3/4 X 2-3/8 Overall (Sold in multiples of 10)

490-173

260599

490-7741 691278

262784
Governor Spring Fits 286700 - 286799 (12-1/2 Hp IC models) Coil Length: 1/2 X 1-1/8 Overall
Governor Spring Fits 60500 and 80500, with choke-o-matic Coil Length: 7/8 X 1-9/16 Overall (Sold in multiples of 10)

490-175

260596
Governor Spring (4000 - 4200 RPM) Fits 60900 and 80900 (with choke-o-matic Coil Length: 13/16 X 1-1/4 Overall (Sold in multiples of 10)

490-177

525-048

230005

Governor Spring Coil Length: 2-3/8 X 1-15/16 Overall

Needle Valve For 2 Hp and 3 Hp horizontal engines. Fits models 60300, 60400, 60700, 80300, 81300, 81400 series

490-105

261105

525-055

23433 690266
Governor Spring Fits 146000, 170000, 190000, 220000 & 251000. Coil Length: 2-1/4 X 2-3/4 Overall (Sold in multiples of 10)

525-188

292681
Needle Valve For 2 and 3 Hp horizontal, 3.5 and 4 Hp vertical, 5 Hp horizontal & vertical. Fits models: 60100, 60200, 60500, 60900, 80100, 80200, 80500, 80900, 82000, 92000, 94900, 100000, 110000 & 130000 series
Idle Screw For 7 thru 18 Hp horizontal engines. Fits models 170400 thru 422700

525-794

230591 692134

525-170

299740
Needle Valve Seat Fits 3 Hp horizontal, 80200 - 80299, 3-1/2 Hp vertical 92900 - 92900, 4 Hp horizontal 110200 -110299 and 5 Hp horizontal 130200 - 130299.
Main Nozzle Fits models 146700, 147700, 170700, 171700, 190000, 191000, 220000, 251700, 252700 and 300420. Measures: 2.534 long - 4 holes

525-246

99525 99525S

525-253

398039 395207
Needle Valve Fits models 170400 - 190400, 220400,221400, 243400, 252400, 254400, 300400 and 302400.
Main Nozzle Fits models 142300 thru 143457, 144200 thru 145254, 146400 thru 147700, 190400, 191400, 193401 thru 200466, 233401. For 8 Hp horizontal engines Measures: 2-7/8 Long - 3 holes

525-089

391233 396795
Needle and Seat Kit Fits 7 thru 12 Hp vertical engines.

525-667

691966 394730

525-030

299060
Main Nozzle Fits models 220400, 252400, 301400 and 302400. For 16 Hp cast-iron engines (new style) Measures: 2-3/4 Long - 3 holes (While Quantities Last)
Needle and Seat Kit For 3 thru 5 Hp pulsa-jet models. Fits models 60200, 60900, 80000, 82000, 92000, 94900, 100000, 110000 and 130000.

525-672

390950

525-022

299059
Main Nozzle For 16 Hp cast-iron engines (old style)

(While Quantities Last)

Needle and Seat Kit For 2 and 3 Hp horizontal vacu-jet models. Fits 60100, 60500, 80100, 80500 and 80600 series.

525-139

93357 / / 690953

520-098

395508
Carburetor Mounting Screw Fits models 196400, 19E400 thru 19G400, 28A700 thru 28D700, 28M700, 176430 and 92232. Double slotted screw Size: 1/4-20 THD X 3/4 Long (Sold in multiples of 10)
Needle and Seat Kit For 3 and 4 Hp vertical engines. Fits models 62030, 93500, 94500, 95500, 113900, 114900, 130200, 130900 and 131200.

120-206

494408 694394

HONDA continued

525-342

16011-ZEO-005

Code# 1441476
Primer Bulb Fits Quantum series 3-1/2, 3.75 and 4 Hp models. Includes: Retainer (without hole)
Needle and Spring Fits models GX110, GX120, GX140 and GX160 series engines.

120-208

496115 694395

525-343

16011-ZAO-931

Code# 2059236

Primer Bulb Fits Quantum series 5, 5-1/2 and 6 Hp models. Includes: Retainer (with hole)
Needle and Spring Fits models GX240, GX270, GX340 and GX390 series engines.

525-054

491006

486-233 NEW

16211-ZE1-000
Throttle Shaft For 8, 10, 11 and 12 Hp vertical engines.
Carburetor Insulator For Honda GX140 and GX160 series engines.

525-451

221747

486-234 NEW

16211-ZE2-000
Welch Plug Fits models 220400, 221400, 243400, 252400, 301430 and 325430. Measures: 1-3/4 diameter (Sold in multiples of 10)
Carburetor Insulator For Honda GX240 and GX270 series engines.

486-236 NEW

16211-ZE2-W00

525-675

221997
Welch Plug Fits models 14600, 170000, 190000, 220000 and 251000. Measures: 1-1/2 diameter (Sold in multiples of 10)
Carburetor Insulator For Honda GX340 and GX390 series engines.

525-476

16013-ZA0-931

HOMELITE

615-028

UP-04802 UP-01201

Primer Bulb Fits BP250, HB180, HBC18, 30 & 32 blowers, GST18, GSTBC, ST145, 155, 175, 185, 275, 285, 485 and SX135 trimmers.
Carburetor Float Fits models GX240, GX270, GX340 and GX390 series engines; also ts liquid cooled 13 Hp.

525-474

16013-ZE0-005 16013-ZE0-065

525-341

16155-883-005

Code# 0636282

Carburetor Float Fits models GX110, GX120, GX140, GX160 and G110 & G120 series engines

525-994

16015-ZE0-811

231555

Float Valve Kit Fits models K91 thru K341

285-859

16562-ZE2-000
Throttle Return Spring Fits models GX240, GX270, GX340 and GX390 series engines.

525-600 NEW

104 01S
Carburetor Bowl Fits Walbro carburetors. Size: 3/8 ID (Hole) X 2-5/8 OD X 1-1/4 HT

485-892 NEW

606-414

1119-141-2200

25-041-04 25-041-04S
Bowl Gasket Fits Walbro made carburetors found on Gravely and many others. Replaces Walbro# 92-301 and Gravely# 044058. Measures: 2-7/16 diameter. On all K & M series Kohler engines w/Walbro carburetors.
Intake Manifold - Rubber Fit Stihl 038 series chain saw.

606-412

1125-141-2200

LAWN BOY

525-303

/ 678882

Toro# 92-9697
Intake Manifold - Rubber. Fits Stihl chain saw models: 034, 036 and MS360

606-418

1122-141-2201
Float Valve Fits models D-600 and F series engines with Lawn Boy manufactured carburetors.
Intake Manifold - Rubber. Fit Stihl chain saw models: 066 and MS660.

525-305

678736

606-776

9771-021-2580
Needle and Seat For old style Lawn Boy engines

527-879

683779

Wabro# 102-3004

Clamping Collar For above, intake manifold. Fits Stihl 038 series chain saw.

Idle Valve Assembly

606-775

1118-182-0900

120-204

607310

Control Shaft Fit Stihl 028 series chain saws.
For more STIHL parts see our Fall / Winter catalogue
Primer Bulb Used on 1974 and newer models, mounted on engine shroud.

(Sold in multiples of 5)

120-440

66-7460

Toro# 66-7460

TECUMSEH

525-591

631700

Carburetor Bowl For oat style carburetors without bowl drain. (aluminum material) Size: 13/32 ID X 2.193 OD X 1.155 HT
Primer Bulb Fits Silver series models with Walbro carburetors.

486-076

602850
Carburetor Bowl Gasket Fit C, D-600 and F series carburetors manufactured by Lawn Boy. (Plastic type)

525-526

631867

525-079

142-0553 0142-0553
Carburetor Bowl For oat style carburetors without bowl drain. (aluminum material) For use with our 525-240 oat Size: 11/32 ID X 2.193 OD X 1.155 HT

525-220

27136A

Walbro 154-503

Float Valve Kit Fits models B43 and B48.
Bowl Drain Assembly Fits on Tecumseh carburetor bowls.

525-240

632019

525-008 NEW

730639
Carburetor Float Fits most oat carburetors. Use with our 525-526 and 525-591 carburetor bowls and our 525-220 bowl drain assembly. Size: 1-3/4 OD X 1 ID X 7/16 HT

525-242 NEW

Aftermarket carburetors only
Carburetor Float for OREGON brand carburetor only. Found in Banta Saw carburetor#s
619-640 (50-640), 619-643 (50-643), 619-644 (50-644), 619-646 (50-646), 619-647 (50-647), 619-648 (50-648), 619-650 (50-650), 619-651 (50-651), 619-653 (50-653), 619-655 (50-655), 619-656 (50-656).
Float Bowl Assembly Repair Kit for Tecumseh carburetors Fits Tecumseh carburetors 632786A, 640034, 640034A, 640072,640072A, 640159 used on OHV135, OHV14, OHV140, OHV145, OHV15, OHV150, OHV155, OHV16, OHV160, OHV165, OHV17, OHV170 & OHV175.

525-010 NEW

730235B

525-243 NEW

619-641 (50-641), 619-649 (50-649), 619-652 (50-652) and 619-654 (50-654).
Float Bowl Assembly Repair Kit for Tecumseh carburetors. Fits Tecumseh carburetors 632671, 632671A and 632671C used on VLV126, VLV40, VLV50, VLV60, VLV65, VLV66, VLX50 and VLX55 (NON-EPA).

525-011 NEW

730637A

485-888

Bowl Gasket Fits Walbro small bowl carburetors. Measures: 1-15/16 diameter

485-862

631028
Float Bowl Assembly Repair Kit for Tecumseh carburetors. Fits Tecumseh carburetors 640020, 640020A, 640020B, 640158 and 640158A used on VLV126, VLV50, VLV55, VLV60, VLV65 and VLV66.

Bowl Gasket Fits Tecumseh oat bowls 631700 (Banta# 525-591) and 631867 (Banta# 525-526). Measures: 2-1/16 diameter

490-201

Governor Spring Fits models LAV25, LAV30, LAV35, LAV40 and LAV50.

485-870

Gravely# 10925 Kohler# 200375

490-219

Bowl Gasket Fits Carter and Walbro large bowl carburetors. Measures: 2-3/8 diameter
Governor Spring Fits models LAV25, 30, 35, 40 and 50, ECV100, 105, 110, 120, TVS100, 105, TVXL105, V40, 50, 60, 70, 80, VH40, 50, 60, 70 and 80.

525-007 NEW

730638

525-516

631937A
Float Bowl Assembly Repair Kit for Tecumseh carburetors. Fits Tecumseh carburetors 640065, 640065A and 640176 used on OHV110, OHV115, OHV120, OHV130 and OHV135.
Bowl Nut Fits small hole bowls (brass material). Carburetor models: 631936, 631939, 632046, 632051, 632052, 632086, 632087, 632088, 632162, 632050A, 632388, 632389 and 632532. Size: 3/8-24 THD - 1/2 hex X 11/16 HT

525-517

631935A

527-739

631781
Bowl Nut Carburetor models: 632052, 632086, 632087, 632088, 632162, 632050A, 632388, 632389 & 632532. (brass material) Size: 3/8-24 THD - 1/2 hex X 13/16 HT
Adjustment Screw Assembly Fits models H80, HM70, HM80, CA-631678B thru CA-631958.

525-204

630932A

530-204

630978

John Deere AM32930

Diaphragm Kit Fits models LAV, V, VH, H22 thru H35, HS40, 638, 650 and 670.
Needle Valve Assembly Fits models LAV, V, VH, H22 thru H35, HS40, 638, 650 and 670. For diaphragm type carburetors.

525-402

Clinton 293-30-5 Walbro 200-547 Walbro 200-506

525-044 NEW

Needle Valve for OREGON carburetor only Found in Banta Saw carburetor#s
619-640 (50-640), 619-643 (50-643), 619-644 (50-644), 619-646 (50-646), 619-647 (50-647), 619-648 (50-648), 619-650 (50-650), 619-651 (50-651), 619-653 (50-653), 619-655 (50-655) and 619-656 (50-656).
Float Valve Kit Fits Walbro models 200-503, 4, 5, 6, 8, 10, 13, 15, 16, 18, 21, 28, 29 and 30.

525-214

632709
Needle & Seat Found on Tecumseh models: OH318, OHM, OHV, OV, TVT, VLV and VTX. Vector & Series VII carbs. Replaces#s 632551 & 632637

525-045 NEW

525-213 NEW

631021B

Needle Valve for OREGON carburetor only. Found in Banta Saw carburetor#s
Needle & Seat Kit Fits Tecumseh carburetor. (Same as our 525-212 but includes oat bowl gasket & washer)

Lawn Boy 300096 Lawn Boy 92-6389

525-212

631021 / 631021A
Carburetor Float Pin Fits models CA-630883 thru CA-632329A carburetors. Measures: 3/32 OD X 15/16 Long
Float Valve Fits models LAV, V, VH, VM, TNT, TVS, H22 thru H80, HH40 thru HH70, HM80 thru HM100, HS, 638, 650 & 670. (Float type carburetors)

525-386

Walbro 102-14

525-337

Idle Screw Original Walbro number 102-14.
Adjustment Screw Assembly Fits models CA-C630958B thru CA-632759.

525-295

Idle Screw

631078 631838

527-317

631583

Adjustment Screw Assembly Fits models CA-63128 thru CA-632710.

120-210

632047 632047A

525-345

631026
Adjustment Screw Assembly Fits models OVRM60, CA-630987A thru CA-632713A
Primer Bulb Fits models LAV, V, VH, H22 thru H35, HS40, 638, 650 and 670, also TNT100, TNT120, ECV100, ECV105, ECV110, ECV120; CA-631849A thru CA-632795 carburetors; TEC-632804, TEC-640173 & TEC-640196

120-289

36045 36045A

TILLOTSON

615-229

34-210 34-219

Primer Bulb Fits Vector carburetor models: VLV-50, VLV-60, VLV-65, VLV-66 and VLV-126. Includes lock washer.
Inlet Needle 3/8 Long - Fits HK series carburetors, also replaces Walbro# 82-82 inlet needle
(Priced individually - Sold in multiples of 5)

120-807

632694A

615-211

34-216 34-188
Primer Bulb For VLV and ELV engines. (with vented hole) Fits carburetor models 632646, 632669, 632670, 632681 and 632756.
Inlet Needle 5/8 Long - Fits HS series carburetors, also replaces Walbro# 82-75 inlet needle

120-290 NEW

23120003 / 321802A 32184 / 570442A 570629A / 570629B

615-508

155A23
Primer Bulb Assembly (Non Original Tecumseh Part)
Fuel Inlet Lever Fits HD and HL series carburetors - non fork lever design. (Original Tillotson)
(Priced individually - Sold in multiples of 10)

120-283

570629A

615-500

155A53
Primer Bulb Assembly (Original Tecumseh Part)
Fuel Inlet Lever Fits HK series carburetors fork lever design. (Original Tillotson)

615-690

630746
Walbro 88-171 Walbro 88-28 (old) Walbro 88-54 (old)

615-516

155A27
Welch Plug Measures: 5/16 diameter
(Priced and Sold individually) ( Sold in multiples of 5)
Fuel Inlet Lever Fits HD and HL series carburetors with fork lever design. (Original Tillotson)

615-674

630748
Walbro 88-175 Walbro 88-55 (old)

615-518

155A29
Welch Plug Measures: 7/16 diameter

615-772

631027

Walbro 88-97

Fuel Inlet Lever Fits HU series carburetors, also found on Walbro: WA, WT, WY & WZ model carburetors. (Original Tillotson)
Welch Plug Measures: 9/16 diameter

615-526

155A26

615-732

363-501
Check Valve Fits HL series carburetors. (Original Tillotson)
Fuel Inlet Lever Fits HS series carburetors. (Original Tillotson)

615-203

233-652
Needle and Seat Assembly Fits HL series carbs. Use with our 615-508 lever (non fork type) (Original Tillotson)

615-205

233-664-P

WALBRO

Needle and Seat Assembly Fits HL series carbs. Use with our 615-516 lever (fork type) (Original Tillotson)
Inlet Needle Fits WA and WT series carburetors. Also replaces Tillotson# 34-216 and 34-188

615-609

95-197
Screen Fuel Screen t HK series carburetors. Size: 1/4 X 3/8 oblong

200-547 200-506

Clinton 293-30-5 Tecumseh 29156

615-617

95-177
Float Valve Fits Walbro models 200-503, 4, 5, 6, 8, 10, 13, 15, 16, 18, 21, 28, 29 and 30.
Screen Fuel Screen t HS and HU series carburetors. Size: 1/4 diameter

75-570

B&S 398187

615-700

179-55
Welch Plugs Fits HL series carburetors. Size: 3/8 diameter
Carburetor Float Fits LMJ, LMK and LMR series carburetors. Fits B&S and Lawn Boy engines with Walbro carburetors. Size: 21/32 ID X 1-17/32 OD X 21/32 H (Made of nylon)

614-509

188-509
Primer Bulb Assembly Fits HDA-51, WA-180, WA-181, WA184, WA-185, WA-187, WA-194, WT-139,WT-145, WT-184, WT-243 & WT-50 model carburetor.

615-020

188-12

614-511

188-511
Primer Bulb Fits WA, WT, WY, WYJ, WYK and WZ series carburetors. Measures: 3/4 ange OD X 5/8 HT
Primer Bulb Assembly Fits WA-140 model carburetor. External mount.

614-069

615-024

188-15

Poulan 530-035496

140-69 140-36 140-37

Primer Bulb Fits WA and WT series carburetors. Found on Poulan models equipped with Walbro carburetor models: WA-225-1 and WT-379. Measures: 3/4 ange OD X 9/16 HT (Red colour)
Screens Check Valve Screens. Fits WA and WT series carburetors. Size: 3/16 diameter

614-070

140-70 140-33

615-026

188-11
Screen Fuel Inlet Screen Fits WA and WT series carburetors. Size: 11/32 diameter
Primer Bulb Fits WZ series carburetors. Measures: 3/4 ange OD X 1/2 HT

615-748

88-115

0018002

Welch Plugs Size: 3/16 diameter
Inlet Needle Measures: 5/8 long with viton tip also used on Tillotson and Walbro carburetors.

615-756

88-136 88-110

0057003

Welch Plugs Fits WA and WT series carburetors. Size: 1/4 diameter
Primer Bulb Fits C1Q series carburetors. Measures: 7/8 ange OD X 5/8 HT
88-171 88-28 (old) 88-54 (old)

0004001

Screen Fuel inlet screen. Size: 1/4 diameter.
Welch Plugs Fits WA and WT series carburetors. Size: 5/16 diameter

0005001

615-764

88-180 88-23 (old)

Welch Plugs Fits C1, C1S, C1U, C1M & C2 series carburetors. Size: 9/32 diameter.
Welch Plugs Size: 3/8 diameter

0005002

88-175 88-55 (old)
Welch Plugs Fits C2, C2S, C3 and M1 series carburetors. Size: 3/8 diameter.
Welch Plugs Size: 7/16 diameter

623-576

Mount Gasket

615-666

Intake Mount Gasket Universal type - Fits Zama, Tillotson and Walbro carburetors.
Welch Plugs Size: 1/2 diameter

615-704 NEW

0005004
Welch Plugs Size: 9/16 diameter
Welch Plug For Zama Carburetors. Replaces Zama# 0005004. Oblong - Long version.
(Priced Individually - Sold in Multiples of 10)

0018004

Inlet Needle Measures: 3/8 long with viton tip also used on Tillotson and Walbro carburetors.

615-706 NEW

0005016
Welch Plug For Zama Carburetors. Replaces Zama# 0005016. Oblong - Short version.
NOTE: For Chainsaw & Snowblower Parts see our Fall / Winter catalogue sections 14, 16 and 40

 

Tags

Coolpix S5 MDX-C6500RV VLF2115 530 1FM Svga 238 Hammer Projectors SL-BD20 50PT85 Diamond QSG754 Heroes S252I UX-F25CW 2443NW FOR PC HBH-PV710 Light 1200 LT Moto Z6W Doom 3 Hcb-100 CQ-C1103NE Motorola H800 VR 404 KX-TGA230 For MAC LS-K2460cl- KX-TCD200G Nf P Beverly 500 P2501 DK8621P EL-337C YP-55V KAC-7202 Jimmy 1994 Yamaha CS01 Dimension E310 EWF1495 FA621 EAX600 Benq V551 RX430 NN-E252WB SD-35 RS 250 Lexmark Z45 14PT6107 KDL-32XBR9 Cf 120 BRC1D527 RIM 2520 Autonome WS70 AL1912 PD-F1009 Emachines E525 Motorola V303 Warrior-1998 29DF55N 514 W MGS-X1 OK-P36CR F1403TDS6 3224C Magic V Avic-U220 Waht-SBP2 VP-D903I ESF6543 HD7850 80 5600HS SL-67B Ls-30 Flash Sport F44060VIL 42064 UA40C7000WF BJ-300 IC-2IA IT560N Shotgun A105-S4254 DV-HRD2 Hoist Tough-3000 Suunto M9 81920 LCD1760VM Wl-354 XD430U VVX380 KH 800 PWE9038-M KT2030 DLE1310W XB12SX ROC4309 Review Grandprix 2000

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101