For Briggs & Stratton Discount Parts Call 606-678-9623 or 606-561-4983
FORM MS-5751-4/06 REPLACES FORM MS-5751-10/05 FILE IN SECT. 2B OF SERVICE ENGINE SALES

31D700 to 31D799

SERVICE ENGINE

SALES MANUAL

MODEL 31D700 SERIES ENGINES REPLACED WITH STANDARD SERVICE ENGINES
In most cases, the Original Type numbers shown may be replaced by a Service Type Number without making any changes. Necessary changes of engine parts such as crankshafts, reduction parts, blower housings, etc., are noted. Other differences, such as mufflers, elbows, deflectors, etc., are not listed but are very important for safety and engine performance. Be sure the exhaust system on the replacement engine duplicates the system originally selected by the equipment manufacturer. Parts that are suitable for additional use should be transferred. Before making any conversion, check the data shown in the column labeled "REMOVE, ADD and NOTE." See if the changes, which are shown, are actually necessary on the application in question. Often a standard service engine will be a WORKABLE replacement without converting to such things as a special fuel tank or starter position. If the crankshaft number does not appear in the "Original Engine" column, consult the Illustrated Parts List for the correct service replacement crankshaft number.
Engine Replacement Notes:
NOTE 35: Transfer the Speed Limiter Control Assembly to the replacement engine. NOTE 81: Transfer Governor Spring to replacement engine.

Short Block Notes:

The SHORT BLOCK part number shown, is the assembly which can be used to rebuild the Original Type Number. If a letter appears after the short block number, it indicates the short block must be modified. The change denoted by each letter is as follows:
Original Engine Type Model 31D777 31D707 31D707 31D777 31D777 31D777 31D707 31D707 31D707 31D707 Crank Make From Model 31Q777 31N707 31N707 31Q777 31Q777 31Q777 31N707 31N707 31N707 31N707 Type # 81 Remove Qty Part # Qty Add Part # Note Change to Type Trim All All All All All All All All All All Short Block RPM Part # Notes

Page 1 of 1

www.mymowerparts.com

Banta UNIVERSAL

146-035 146-040 146-045 146-050 146-055 146-060 146-070 146-080 O.E.M Size

STARTER PARTS

Application Part# Length Application

328 FT.

(100 meters)

Application

Starter Rope - Centre core, 16 strand outer wrap with blue tracer (Made in Germany) 146-035 shown at top Starter Rope - Solid braid rope Starter Rope - Solid braid rope Starter Rope - Solid braid rope Starter Rope - Centre core, 16 strand outer wrap with blue tracer. Starter Rope - Centre core, 16 strand outer wrap with blue tracer. Starter Rope - Centre core, High Quality with low stretch core; with red tracer. Starter Rope - Solid braid rope

4 4-1/5-1/7 8

250 FT 328 FT

328 FT

200 FT

(61 meters)

250 FT

140-016

Universal
Starter Handle Natural hardwood handle. For use with #4 thru #6 rope sizes.
(Sold in multiples of 10)

140-061

John Deere AM30965 Tecumseh 590387 Toro 77-8510
All starter springs for LAWN & GARDEN, GENERATORS, TRIMMERS and WATER PUMPS - can be found in Section 43 NOTE: For CHAIN SAW starter springs see our CHAIN SAW - O.E.M. section. STARTER PARTS are listed in alphabetical order by manufacturers name >
Starter Handle Rubber handle with steel insert. For use with #4 thru #6 rope sizes

BRIGGS & STRATTON

150-700

691262 / / 394805

Electric Starter Motor For Briggs. Std. version. Used on single cylinder aluminum block engines. For 5, 6, 8, 10 & 11 Hp engines. Models: 212707, 212907, 214707, 214907, 215707, 215807,
215907, 216907, 217707, 217807, 217907, 219702, 219707, 219807, 219907, 21A707, 21A807, 21A902, 21A907, 21A972, 21A977, 21B707, 21B807, 21B902, 21B907, 21B972, 21B977, 280H07,280J07,281H07, 282H07, 283702, 283707, 283H07, 284702, 284707, 284H07, 284H77, 285H07, 285H77, 286702, 286707, 287707, 288702, 288707, 289702, 289707, 28B702, 28B707, 28CH77, 28D707, 28M707, 28N707, 28N777, 28P777, 28Q777, 28R707, 28S707, 28S777, 28T707, 28U707, 28V707, 28W707, 310707, 311707, 311777, 312777, 313707, 313777, 31A507, 31A607, 31A677, 31A707, 31A777, 31B707, 31C707, 31D707, 31D777, 31E777, 31F707, 31F777, 31G777, 31H777, 31L777, 31M777, 31P677, 31P707, 31P777, 31P877, 31P977, 31Q677, 31Q777. Measures: 3-5/8 housing length between

560-123

Starter Handle Heavy duty starter handle. Large plastic handle with removable cap for putting rope knot. (Sold in multiples of 10)

140-046

Echo 177228-01110 John Deere PT2637
Starter Handle Plastic starter handle. For use on small equipment applications.

140-103

B&S 398101 John Deere Pt10615 Noma 315542 Tecumseh 590574
Starter Handle Large plastic D style handle. Excellent for use on winter equipment.
caps. (16 tooth gear). (Uses our replacement brush kit # 150-761)
STARTER PARTS BRIGGS & STRATTON

150-778 O.E.M

499521 / / / / 394943
Banta BRIGGS & STRATTON

150-781 O.E.M

693551

Heavy Duty

Electric Starter Motor Heavy Duty version Electric Starter Motor for Briggs and Stratton engines Heavy Duty version. For 12 thru 22 Hp engines. Fits models 254422, 254427, 286707, 28A707, 28B702, 28B707, 28M707, 28Q777, 28N707, 407777 etc. Measures: 4-3/8 housing length between caps. (16 tooth gear). (Uses our replacement brush kit # 150-761)

Electric Starter Motor For Briggs and Stratton engines - Standard version comparable to O.E.M. 12 Volt, 14 Tooth, CCW Rotation. Used on 7, 8, 10, 11, 12, 12.5, 16 and 18 Hp engines. Fits B&S single cylinder aluminum block engines with metal / steel ring gear on the ywheel. Fits models 280700 - 289799, 310700 - 313799, 31C700 - 31C799, 31F700 - 31F799, 31M777, 31H777 and 323799. Measures: 3-5/8 housing length between caps. (14 tooth steel gear). (For Heavy Duty version see our 150-783)

150-701

497596 394808

150-780

/ 808106
Electric Starter Motor For Briggs and Stratton engines - Standard version comparable to O.E.M. Used on most twin cylinder engines. Fits models 422700 thru 422799. For 14, 16 and 18 Hp engines. Measures: 3-5/8 housing length between caps. (16 tooth gear). (Uses our replacement brush kit # 150-761)
Electric Starter Motor For Briggs and Stratton engines - Standard version comparable to O.E.M. Fits models 350000 thru 380000 with steel ywheels. Measures: 3-5/8 housing length between caps. (15 tooth steel gear). (Uses our 150-129 starter drive kit)

150-779

/ / 498148

150-785 NEW

695479
Electric Starter Motor For B&S engines Heavy Duty version. > 15% faster than the O.E.M.; > 15% more torque than the O.E.M.; > Exceeds O.E.M. Standards > Gold Colour. For 14 thru 20.5 Hp twin cylinder engines only. Fits models 422700 thru 422799. Measures: 4-3/8 housing length between caps. (16 tooth gear). (Uses our replacement brush kit # 150-761)

150-719

391178 396306
Electric Starter Motor For Briggs and Stratton engines. Fits 20000 series engines. Found on some 111902, 111982, 111992, 201312, 201317, 201332, 201337, 201352, 201412, 201415, 201416, 201417, 201432, 201437, 201452, 202312, 202317, 202337, 202332, 202357, 202352, 202412, 202417, 202432, 202437, 202452, 202457, 203432, 203437, 203452, 203455, 204312, 204317, 204332, 204337, 204412, 204415, 204417, 204432, 204437, 205312, 205317, 205332, 205337, 205352, 205357, 205412, 205417, 205432, 205437, 205452, 205455, 205457, 206437, 207437, 20H132, 20H136, 20H137, 210312, 210317, 210332, 210417, 212317, 212337, 212417 and 212437; 12 Volt, 14 Tooth, CCW rotation. Measures: 3-13/16 housing length between caps. (12 Volt, 14 tooth gear, CCW rotation).

150-354

395538

150-113

/ 391135
Starter Drive Clutch Fits most electric start B&S engines that are retained with a roll pin. Overall height: 1-3/8 Metal body with nylon spiral.
Brush & Bushing Set Fits O.E.M. style Briggs & Stratton electric starter motors. Models 176432, 176437 and 176452. For 3-5/8 or 4-3/8 housing length.

150-763

490311

150-078

693058 / 280104 280104S / / 4114 / 4155

John Deere M83184

Starter Gear Fits most electric starter motors with plastic gears. 16 teeth X 1-5/8 OD For aluminum and plastic ring gears.
Brush Set For O.E.M. Briggs and Stratton starter motors. Fits O.E.M style B&S starters with roll pin starter gear retainer. Found on models 254412, 254422 and 254427 with 4-9/16 housing length.

150-760 O.E.M

497608

150-462 O.E.M

494782
Brush Set For O.E.M. Briggs and Stratton starter motors. Fits O.E.M style B&S starters with C clip starter gear retainer. Found on models 176432, 176437 and 176452.

150-353

395537

John Deere AM107180

Starter Rewind Assembly For 5 Hp engines. Fits models 133202, 133212, 133232, 133237, 135202, 135212, 135232, 135237, 135252, 135292, 135297 and 135702. Pulley diameter: 5-3/8 (4) 3/16 mounting holes on 4-1/2 centers. Height: 1-1/2

150-468

Brush Holder Cap Fits O.E.M. style Briggs and Stratton electric starter motors. Models 176432, 176452 and 196402. On starters with 3-5/8 housing length between caps

497680

Starter Rewind Assembly For 12 CID vertical shaft L-head engines.

150-362

691293 497605

150-463 NEW

499706 690101
Starter Brush Retainer Fits Briggs and Stratton starter motors. Models 294722, 294775, 294776, 294777, 303722, 303776, 303777, 422435, 422437, 422442, 422447 and 422707.
Starter Rewind Assembly Fits Briggs and Stratton 9 and 10 CID engines. For Sprint and Classic engines.

140-020

490652

John Deere M81545

Starter Handle Rubber starter handle. For 3-1/2 thru 18 Hp engines.
(Sold in multiples of 10) (While Quantities Last)

150-507

280918

140-038

230228
Starter Pulley Fits 8 Hp and up Vanguard engines. Models 290400, 290700, 294700, 303400, 303700, 350400 and 350700. Measures: 1/2 ID X 6-3/8 OD
Metal Pin only For use with our 140-020 Briggs and Stratton starter handles.

140-087 150-941

499901

4119 393152

John Deere AM37265
Starter Pulley & Spring Fits 9 and 10 CID engines. Measures: 4-1/2 OD
Starter Handle Rubber starter handle w/insert. For 2 thru 5-1/2 Hp, Quantum, Europa and all vertical pull starter engines.

150-060

/ 495737

John Deere AM35020

140-053

491288 / / 280121

John Deere M81547 John Deere M93586
Starter Gear Assembly Fits 3 thru 4 Hp vertical pull Briggs and Stratton engines. (Includes rope) Fits models 92508, 92908, 110908 and 111908. (Uses our 155-1003 starter spring)
Starter Handle Rubber starter handle w/insert. For vertical pull models.

150-964

281503

140-085

281434 281434S
Starter Cap Fits recoil starters. Fits 197400, 197422, 197417, 93412, 93452 & 98902 series engines.
Starter Handle Plastic handle with large grip for Briggs and Stratton engine models.

(Sold individually)

140-103 O.E.M

398101

John Deere Pt10615 Noma 315542 Tecumseh 590574 Toro 77-8510

Banta GENERAC

150-782 O.E.M
OC3017 OE4271 OE9323 10455515
Starter Handle Plastic D mitten-grip handle. Used on Snowblowers with pull starts.
Electric Starter Motor Replacement starter motor for Generac. For Dixie Chopper. (8 tooth gear).

150-029

495970 / / / 293578

John Deere PT13767

GRAVELY

150-707

032546
Electric Starter Motor Fits KT17 - 19, MV16, MV18 and M18. For 17 thru 19 Hp engines. 3-1/16 OD housing X 8-7/16 overall length. (2) 1/4 - 20 mounting studs, 2-1/2 c to c mount (Most popular starter motor for Magnum series)
Starter Clutch Assembly Fits models 60100 thru 326400. For most 3 thru 16 Hp Briggs engines.

150-037

Briggs & Stratton
Bumber Clips For B&S engines up to 8 Hp. Repairs starter housings with broken tabs. Snaps into lugs of starter.

150-702

042404

150-045

John Deere M47812
Bumper Clips Fits 3, 3-1/2, 4 and 5 Hp Briggs and Stratton engines.
Electric Starter Motor Fits models M8 thru M16. For 8 thru 16 Hp engines. 3-1/16 OD housing X 7-1/4 overall length. (2) 1/4 - 20 mounting studs, 2-1/2 c to c mount

150-718

049247 038033

150-052

John Deere M49446
Bumper Clips Fits 6, 7, 8, 10, 11 and 12 Hp Briggs and Stratton engines.

FAIRBANKS MORSE

560-101

111-84 / 111-71

Homelite A-57647 John Deere 1719 Poulan 4229 Remington 60832 Stihl 1106-190-4600 Tecumseh 590222
Electric Starter Motor Fits models M18, M20, MV20, KT19, KT21, K161 and K181. 3-1/16 OD housing X 9-3/16 overall length. (2) 1/4 - 20 mounting studs, 2-1/2 c to c mount (Most popular for KT series)

018610

Brush Kit Fits above Banta starter motors.
Starter Dog Assembly - Large. Size: 1/2 Wide with a 3/8 centre hole.

150-825

31210-ZE1-023
Electric Starter Motor Fits models GX140 and GX160. For 5 and 5.5 Hp engines. 12 volt, 17 tooth Solenoid included

560-102

10-27-80
Tecumseh 590190 Tecumseh 590191
Starter Dog Washer Fibre washer. Fits above starter dog assemblies.

Banta HONDA

150-827

continued

150-841

Access hole

31200-ZH9-003
31200-ZJ1-841 31200-ZJ1-842
Electric Starter Motor Fits model GX270 engine. For 9 Hp engines. 12 volt, 17 tooth Solenoid included

150-829

31210-ZA1-003 31210-ZE8-801
Electric Starter Motor Fits models GX610, GX620 and GX670 series engines. For 24 Hp engines. 12 volt, CW, 11 tooth
Electric Starter Motor Fits model GXV270, GXV340 and GXV390. Fits EMS4000A, EMS4500A, Generators, ES4500K1A, EV4000A, G300 and G400K1 engines. HT3810SA and HT3810K1SA lawn tractors. Fits some 8, 9, 10, 11 and 13 Hp engines. 12 volt, Rotation: CCW, 14 tooth. Solenoid included

150-828 NEW

31200-ZF5-L31 31200-ZF5-L32

150-735

31210-ZE3-013

Code 2450740

Electric Starter Motor Fits Honda models: GXV340 and GXV390. CCW, 10 tooth. Fits some 8, 9, 10, 11 and 13 Hp engines. 12 volt, 10 tooth. Solenoid NOT included. More Starter Motors for Honda see Main catalogue page 42-07 thru 08

Starter Rewind Pulley Includes starter spring Fits Honda model GXV160. > (1) Cog style, steel cog > Pulley OD: 4-3/4

150-070

28444-ZE2-W01

150-167

28421-ZE2-W01
Starter Pawl Repair Kit Newer style rewinds. Fits models GX240, GX270, GX340 and GX390. (Fits our 150-469 Rewind Assembly)
Starter Rewind Pulley Newer Style. Fits Honda models: GX240 and GX270 & K1 series. For 8 and 9 Hp engines. > (2) Cog style, Steel cogs > Pulley OD: 5-13/16 (Fits our 150-469 starter rewind assembly)

150-072

28434-ZE1-711
Starter Pawl Repair Kit Older style rewinds. Fits models GX340 and GX390.
(Fits our 150-459 Rewind Assembly)

150-082

28422-ZH8-013

150-168

28421-ZE3-003 28421-ZE3-W01
Starter Ratchet / Pawl Fits models GX110, GX120, GX140, GX160 and some GX200 series engines.
Starter Rewind Pulley Newer Style. Fits Honda models: GX340 and GX390. > (2) Cog style, Steel cogs > Pulley OD: 6-5/8 (Fits our 150-460 starter rewind assembly)

150-089

28485-ZE6-T02 Code 3979937
Starter Ratchet / Pawl Fits models GXV160 series (While Quantities Last)

150-080

(Ratchet ^)

150-083

28422-ZE2-W01 Code 3678877

28443-ZH8-003

(Spring ^)

28433-ZH8-003

(Guide Ratchet ^)
Starter Ratchet / Pawl Fits models GX240, GX270, GX340 and GX390 series engines.

150-090

Starter Pawl Repair Kit Newer style rewinds. Fits models GX110, GX120, GX140, GX160 and some GX200 series. (Fits our 150-452 Rewind Assembly)
28486-ZE6-T02 Code 3979929
Starter Ratchet Return Spring Fits model GXV160 series engines.

(While Quantities Last)

150-087 O.E.M
28443-ZE2-W01 Code 3678901

150-154

28450-ZE2-W11
Starter Ratchet Return Spring Fits models GX240, GX270, GX340 and GX390 series
Starter Cup Fits models GX240 and GX270 series engines. Measure: 2-5/8 OD X 2-9/16 overall height.

150-086

28443-896-000 Code 0927939

150-155

28451-ZE3-A02
Starter Ratchet Return Spring Fits model GXV120 series engines.

150-088

28443-ZH8-003 Code 3683927
Starter Cup Fits models GX340 and GX390 series engines. Measure: 2-5/8 OD X 2-15/16 overall height.
Starter Ratchet Return Spring Fits model GX160 series engines.

150-150 NEW

28451-ZH7-801

140-073

28461-ZL8-003
Starter Handle Fits Honda models GCV135 and GCV160 series engines. (Fits our 150-466 rewind assembly)
Starter Cup Fits Honda model: GX120 series engines with metal starter dogs. (Fits our 150-479 starter rewind)

140-070

28461-ZGO-004 28461-ZGO-013 Code 4186425
For HOMELITE STARTER PARTS see our CHAIN SAW ACCESSORIES (16) and TRIMMER (50) sections. For HUSQVARNA STARTER PART see our CHAIN SAW ACCESSORIES (16) and TRIMMER (50) sections.
Starter Handle Fits small Honda engines. Model G100. (Fits our 150-063 rewind assembly)

140-071

28461-ZH8-003
Starter Handle Fits Honda models GX110, GX120, GX140, GX160, GX200 and GX240. (Fits our 150-452 rewind assembly)

KAWASAKI

150-924

131652073 131652092

Starter Pawl Fits many Briggs and Stratton recoil starters with nylon pawls. Fits models 122K02, 122K82, 124K02, 12F702, 12F707, 12F782 and 12F802. Fits many Kawasaki 12.5 and 14 Hp rewinds. Used on models: FB460V, FC400V, FC401V, FC420V, FE250D, EF290D, FE350D and FE400D.

140-072

28461-ZE1-003 Code 1428747
Starter Handle Fits large Honda engines. Made of rubber.

150-152

28451-ZH8-003
Starter Cup Fits model GX160 series engines. Measure: 3-1/16 Flange OD X 2-9/16 across the ats X 1-7/16 overall height.

150-733

21163-2077
Electric Starter Motor Fits model FD590V-S05.

Banta KAWASAKI

150-728 O.E.M

21163-2073 21163-2073A

John Deere AM104559 Kubota12498-63010 Denso128000-4020

150-729 O.E.M

21163-2101
John Deere AM109408 Denso 128000-9360 Nippondenso128000-9360

Electric Starter Motor Fits models FB460V, FC401V, FC400V and FC420V. Fits John Deere LX176 lawn tractor with Kawasaki engine. Fits Kubota 1995-Up T1460 tractors. 12 volt, 9 tooth gear, Rotation: CCW

150-12430 211632069

211632085 211632093
John Deere AM102382 John Deere AM106948 John Deere AM108615 Kubota 1249963010 Nippondenso 128002810
Electric Starter Motor Fits Kawasaki on John Deere Gator 6x4, Gator HPX, Trail Gator with 18 Hp Kawasaki. Also used on Gator HPX with 20 Hp Kawasaki. Fits Models: FD501 thru FD661, FD501D thru FC661D and 5F501; also models FD501, FD501F, FD620D, FC661D and FD661. Also found on Cub Cadet equipment with Kawasaki engine. Measures: 7-3/8 L X 2-17/64 OD 12 volt, 9 tooth gear, Rotation: CCW

150-730

21163-7001 21163-7010
Electric Starter Motor (12 volt) Fits Kawasaki model: FC540V, found on John Deere equipment. Fits John Deere model LX186, (1991), GT262 (1992- thru 1996), GT275 (1995 thru 1996), HD-75 (1997 thru 2003), 325 w/ 17 Hp(1995 & newer), F525 seria# 130001 on (1990 & newer), F710, 180, 185, 260, 265 (1988 thru 1994), GS25, 30, 45 and GS75, HD45 and HD75. Also ts Kubota T1700 and T1700HX.
Electric Starter Motor Fits models FH451V, FH500V, FH531V, FH541V, FH580V, FH601D, FH601V, FH641D, FH641V, FH680D, FH680V, FH721D and FH721V. Measures: 8-1/4 L X 3-7/64 OD 12 volt, 10 tooth gear, Rotation: CCW

150-12279 21163-7002

21163-7014
John Deere AM127877 John Deere MIA11408 John Deere AM133636 Denso 228000-7990 Nippondenso228000-7990

150-11487 21163-2068

John Deere AM102628 Nippondenso 128000-2760
Electric Starter Motor Fits 18, 20, 23 & 25 Hp Kawasaki engine models: FH541V, FH601V, FH641V, FH680V and FH721V. Found on John Deere models: GX255, GX325, GX335, LX280, GT245, 335, 325, Z TRAK 647, 657, 667, 717, 717A, 727, 727A. Walk Behinds 7H17 and 7H19. 12 volt, 9 tooth gear.
Electric Starter Motor Fits models FC290V 1987 thru 1996 John Deere 9 Hp engines. Found on 130 series lawn tractor with Kawasaki engines. Found on 1986 thru 1988 John Deere 130 Lawn Tractor, GX75 (1991 thru 1996) and RX (1987 thru 1990), SRX75 (1991 thru 1996), SX75 (1987 thru 1990) riding mowers.
12 volt, 9 tooth gear, Rotaion: CCW

150-12697 21163-7003 NEW

Electric Starter Motor Fits Kawasaki models: FH451V. 12 Volt, Rotation: CCW, 10 tooth

150-754

21163-2070 21163-2081
John Deere AM102567 John Deere AM107206 Nippondenso12800-2890

150-746 NEW

211637026
Starter Motor Fits Kawasaki FB460V engines. Used on John Deere 130, 160 165, LX176, SX95 and SRX95. Fits Various 12.5 hp models. 12 volt, 9 tooth gear, Rotaion: CCW
Electric Starter Motor Fits Kawasaki models: FH721V, BS40 and AS40. 12 Volt, Rotation: CCW, 10 tooth
STARTER PARTS KAWASAKI continued
O.E.M Application 150-211632120 NEW 211632130
Electric Starter Motor Fits Kawasaki models: FD750D. Used on Cub Cadet and John Deere lawn equipment, 23 thru 27 Hp engines. Models: CA460, FD671DBS etc. 12 volt, 9 tooth gear. Rotation: CCW.

155-1072 92145-7008 NEW

Starter Spring with case Fits Kawasaki 13 thru 17 Hp engines. Used on models: FH430V, FH451V, FH480V, FH500V, FH541V and FH580V.

KOHLER

150-774

45-098-09

Electric Starter Motor Heavy Duty version of our 150-704. > 15% faster than the O.E.M. > 15% more torque than the O.E.M. > Exceeds O.E.M. Standards > Heavier gel coat on the laminations > Larger brush surface contact area
Fits model K241 thru K341 series engines. For 10 thru 16 Hp single cylinder engines. 10 tooth gear Measures: 3-1/16 OD housing X 7-1/4 overall length. (2) 3/8 mounting holes on 2-5/8 centre to centre.
150-211637034 NEW 211637035
Electric Starter Motor Fits Kawasaki models: FR691-AS04 engines. Used on Cub Cadet zero turn mower; also ts Husqvarna model LGTH2454. 12 volt, 10 tooth gear. Rotation: CCW.

435-030

27010-2122

Kohler 52-435-02S

Starter Solenoid Fits our 150-728, 150-729 and 150-733 starter motors for Kawasaki as well as our 150-714 starter motor for Kohler.

150-704

150-571

49088-2166

45-098-09 45-098-09S 45-098-07 / 237534 A237534 / 237511 A237510 /
John Deeere AM37869 John Deere AM34248
Starter Rewind Assembly Fits Trimmer models TD40 and TD48.

150-214 NEW

59101-2103 59101-2110
Starter Pulley For Kawasaki. For 12.5 and 14 Hp engines. Used on models: FB460V, FC401V, FC420V. Measures; 7-7/16 OD
Electric Starter Motor Fits model K241 thru K341 series engines. For 10 thru 16 Hp single cylinder engines. 10 tooth gear 3-1/16 OD housing X 7-1/4 overall length (2) 3/8 mounting holes, 2-5/8 c to c mount.

150-051

41-755-33 41-755-33S

150-215 NEW

591017001

Electric Starter Motor Kit Fits Tecumseh engine models: H30 thru 35, HS40 thru 50, HSK30 thru 40, HSSK40 thru 50, OHH50 thru 60 and OHSK50 thru 70. Includes: Starter, Starter B utton, Extension Cord and mounting hardware. > 9 tooth gear

150-742

33290C / 33290D 33290E / 33517B 34601B / 35251 / 35601

150-364

Fits Tecumseh
Starter Motor Shoulder Bolt Fits our 150-713 and 150-739 starter motors for Tecumseh.

150-220

Brush Holder Assembly For 12 volt electric starters. Fits starter models ES-33835. Measures: 2-7/8 Plate OD, (4) mounting holes on 2-1/4 centers.
Electriv Starter Motor Kit This 120 volt electric starter motor kit (HEAVY DUTY). Fits the following Tecumseh engine models: HSSK40 thru 55, H30 thru 35, HS40 thru 50, HSK35, HSK40, LH195, OH195, OHSK50 thru 70. > 9 tooth gear. KIT INCLUDES: Starter, starter button, hardware and extension cord. (Heavy Duty version of our 150-736) (For the Standard Duty version see our 150-736)

150-737

33328E / 33328D / Ariens 72403500

150-221

Brush Holder Assembly For 12 volt electric starters. Fits starter models ES-33600, ES-33605 and ES-33606. Measures: 2-7/8 Plate OD, (4) mounting holes on 2-1/4 centers.

150-768

/ 35899
Starter Motor End Cap Fits models OHV110, OHV125 and OHV130. Includes: brushes and bearings.
Electric Starter Motor Kit Fits Tecumseh engine models: TVM125 thru 140, V70, H50 thru 70, HSK50 thru 70 and HH60. For 7 Hp Snow King engines. Includes: Starter, Starter Button, Extension Cord and mounting hardware. > 16 tooth gear (Uses our 150-047 starter drive gear)
STARTER PARTS TECUMSEH continued
150-738 O.E.M Application
33329E / 33329D / 33329C / 33519A 33542A / 35096 / 37000 / / 88923 / 88922 / 88921

Ariens 72403600

150-005 NEW O.E.M

590739

Electric Starter Motor Fits Tecumseh engine models: HMSK70 thru HMSK100, HM70 thru HM100, TVM170 thru TVM220 & TVXL. For 8, 10 and 12 Hp Snow King engines. Includes: Starter, Starter Button, Extension Cord and mounting hardware. > 16 tooth gear (Uses our 150-047 starter drive gear)
Starter Rewind Assembly Fits models: LEV80, LEV100, LEV105, LEV115, LEV120, LV148, LV195, OV195, OVRM60, OVRM65, OVRM105, OVRM120, TVS90, TVS100, TVS115, TVS120, TVS600VLV55, VLV60, VLV65, VLV66, VLV126. For 3-1/2 to 4 Hp engines. Measures: 5-7/8 OD (Base). (4) 1/4 diameter and (4) 3/16 diameter holes around the outside. Comes complete with (2) steel starter dogs. Note: The main difference between
150-005 & 150-004 is the starter pulley - NO raised lip.

150-006

150-740
33329E / 33329D / 33329C / 33519A
33542A / 35096 / 37000 / / 88923 / 88922 / 88921

590621 590694

Starter Rewind Assembly Fits small & medium frame E-Z pull starts. Fits ECV series (Sears), TVS series 90 thru 120 - 1990 production and up, LEV100, LEV105, LEV115, LEV120, OVRM105, AV520 & TVXL840. Not for snow applications. Electric Starter Motor Kit Same application as our 150-738 > 16 tooth gear (Uses our 150-047 starter drive gear)

150-007 NEW

590749 590749A 590789

150-003

590420A 590706

John Deere AM30934

Starter Rewind Assembly Fits Tecumseh models: LAV, TVS, H, HS25 thru HS40 (small & medium frame engines), TVM125 & TVM140. Fits most engines built before 1990. Fits all Snow King applications. > (4) bolt mounting pattern.

150-004 NEW

590742 590787
Starter Rewind Assembly Fits Tecumseh models: HMSK80, HMSK100 snow engines and HMSK105. For small and medium frame engines. (Snow King applications only). Measures: 7 OD; (8) 3/8 OD mounting holes; 2 Steel Cogs. Note: The main difference between 150-007 & 150-008 is that the 150-007 starter pulley has a raised lip around the starter dogs. It measures 3-1/4 OD X 5/8 HT approximately. Also it has a receiving cup built in for the starter handle.

150-008 NEW

Starter Rewind Assembly For Tecumseh. Fits models: HSSK50 and HSK70, also some AV, H35, HSK, HSSK, LH and TV085 models. Measures: 5-7/8 OD (Base). (4) 1/4 diameter and (4) 3/16 diameter holes around the outside. Comes complete with (2) steel starter dogs installed, starter pulley, starter rope and housing. Note: The main difference between 150-004 & 150-005 is the starter pulley - raised lip.

590748 590748A

Starter Rewind Assembly Fits Tecumseh engine models: HM80, HM90, HM100, LH318XA, LH358EA, OH195, OH318, TVM220, OHH50, OHH55, OHH60 and OHH65. For small and medium frame engines. Bolt on rewind assembly for Non Snow King engines. Measures: 7 OD; (8) mounting holes; 2 Steel Cogs

150-169 O.E.M

590413A 590478

John Deere M42269

560-101 O.E.M

590222

Starter Pulley Fits our 150-003. (3) dog style pulley, will also replace (1) dog style. Fits models TVS & ECV series, H30 thru H70, LAV30 thru LAV50, V50 thru V70, TVM125 and TVM140. Measures: 4-3/8 diameter
Starter Dog Assembly Large size. Size: 1/2 Wide with a 3/8 center hole.

590190 590191

150-616

590618 590616

Starter Dog Washers Fibre washers. Fits our 560-101 starter dog.
(Priced and sold Individually) (Sold in multiples of 10)
Starter Pulley and Spring Fits our 150-006. Includes all hardware as shown & starter spring. Measures: 5-1/2 OD

590574

B&S 398101 John Deere PT10615 Noma 315542

150-618

Starter Handle Plastic D mitten grip handle. Used on Snowblowers with pull starts.

Starter Pulley (no spring) Fits our 150-006 starter rewind for Tecumseh. Measures: 5-1/2 OD (Same as 150-616 minus the starter spring & hardware).

590387 Am30965 77-8510

Starter Handle Lawn & Garden applications. Rubber starter handle with steel insert.

155-1038 Fits Tecumseh

Starter Spring Fits our 150-618 starter pulley (above)
NOTE: More starter springs for Tecumseh on page 42-26. (Replacement starter spring for Tecumseh#s 590686, 590737, 590621, 590642A rewind assemblies and our 150-006 and 150-616).

150-741 NEW

Hardware Kit
Fits our 150-738 and 150-740. Used to mount 110 Volt electric starter motors.

150-743 NEW

Hardware Kit For our 150-737. Used to mount 120 Volt electric starter motors found on Tecumseh engines.
Starter Motor Shoulder Bolts Fits our 150-713 starter motor for Tecumseh. Used to mount the newer style starters.

150-744 NEW

Hardware Kit for our 150-736 and 150-742. Used to mount 120 Volt electric starter motors found on Tecumseh engines.

150-177

Starter Bolt Fits our 150-003 and others. Size: 1/4-28 X 3/8 thread length.

TORO / WHEEL HORSE

150-023 NEW

289110

Starter gear pinion For Toro 2 - cycle snowblower models: S200 and S620. 16 Tooth gear

150-011

590416
Starter Cup Fits models LAV22, 25, 30, 35, 40, 50, LV35, V40, V50, V60 thru type letter E, H22 25, 30, 35 thru type letter E, ECH90 and HS40.