MFC-9660

Quick Setup Guide

Packing List

Document Support IEEE-1284 Compliant Bi-directioned Cable Drum Unit Assembly (TN-6300) AC Cord CD-ROM

THANK YOU!

FOR PURCHASING YOUR BROTHER MACHINE. WE ARE SURE YOU WILL BE IMPRESSED WITH THE CONVENIENT WAY THAT YOUR NEW MACHINE PERFORMS SO MANY TASKS WITH GREAT RESULTS! Follow these simple instructions in numerical order. For greater detail, consult your Owners Manual and CD-ROM. Alternatively, if you cannot solve a problem: Refer to Frequently Asked Questions (FAQs) on Brother Solutions Web Site: URL: http://solutions.brother.com Call Brother Customer Service at: 2354
Owners Manual Telephone Line Cord Document Tray with Extension
Brother Quick Setup Guide
Keep the packing materials for possible future transport. If you do not pack the machine properly, it may void your warranty.

Install the Drum Unit

C. Open the front cover of the machine.
If you have an Optional Paper Tray, Connect it
B. Plug the modular cable from the Lower Tray into the modular jack on the machine.

Attach the Trays

A. Unpack the drum unit assembly, and gently rock it from side to side five or six times to distribute the toner evenly inside the cartridge.
A. Carefully pick up the machine and place it on top of the Optional Paper Tray (Lower Tray).

Document Support

To prevent damage to the drum, do not expose it to light for longer than a few minutes. B. Remove the protective part.
D. Insert the drum unit assembly into the machine. To select which tray will be used for faxes or for copies, see Lower Tray (With Optional Paper Tray Only) and for printer setting, see Paper Source in Owners Manual. If you move the machine after connecting the Lower Tray, be sure to carefully lift the Lower Tray with the machine because they are not attached.
Document Tray with Extension
E. Close the front cover.

Load Paper

A. Pull the paper cassette completely out of the machine. B. Adjust the paper guides at the right and rear of the paper cassette for the paper size you want. C. Load paper in the paper cassette. Press down on the paper to flatten it in all four corners, keeping the paper level below the guide. D. Slide the paper cassette into the machine until it locks into place.
Install Mains Power Cord and Telephone Line Cord

(Example for the U.K.)

Sharing a Single Line with a Telephone Answering Device (TAD) or an External Telephone
Maximum Paper Height Guide

Mains Power Cord

Telephone Line Cord

External Telephone

Extension Telephone
Do Not connect the Parallel or USB Cable.

Fax TAD F/T

Selecting Receive Mode

Set Date and Time

Set Station ID
Choose the mode that best suits your needs by pressing Mode repeatedly until you have changed the Fax and F/T lights to the setting you want to use. ( means light off. means light on.) For use with a dedicated fax line. Every call is answered as a fax. For receiving fax and voice calls on one line. The machine answers every call and receives a fax or pseudo rings for you to pick up a voice call. For use with an external answering device. The TAD answers every call and stores voice messages. Fax messages are printed. Make sure that TAD is connected to the external jack. You control the phone line and must answer every call yourself.

A. Press Menu,

1.DATE/TIME YEAR:XX ENTER & SET KEY
2.STATION ID FAX: ENTER & SET KEY
B. Enter the last two digits of the year and press Set.
MONTH:XX ENTER & SET KEY
B. Enter your fax number, then press Set.

TEL: ENTER & SET KEY

C. Enter your telephone number, then press Set.
NAME: ENTER & SET KEY
C. Enter two digits for the month and press Set.
DAY:XX ENTER & SET KEY
D. Enter two digits for the day and press Set.
TIME:XX:XX ENTER & SET KEY
D. Enter your name using the dial pad and the chart twice to create below, then press Set. Press blank space.
Press Key once A D G J M P T W twice B E H K N Q U X
three times four times five times C F I L O R V Y 6 S 8 Z A D G J M 7 T 9
E. Press Stop/Exit. For more details, see Entering Text in Owners Manual.
E. Enter the time in 24-hour format and press Set. F. Press Stop/Exit. Note: If you cant step forward, press Stop/Exit and repeat from Step A. 1
For more details, see Receive Mode Settings in Owners Manual.
Note: If you cant step forward, press Stop/Exit and repeat from Step A. Version A
Setting Up the MFC and PC to Work Together

Before You begin

You must set up the hardware and install the Brother Drivers before you can use your MFC as a printer and scanner in any Windows application. Please purchase the appropriate cable if you intend to use USB.
Use only a shielded parallel interface cable that is IEEE 1284-compliant and/or a USB cable that is no longer than 6 feet long (1.8 meters).
Follow the instructions in this guide for your operating system and interface.
For Windows 95/98/98SE/Me/2000 Users

Step 1. Step 2. Step 3.

Unplug the MFC from the AC outlet and disconnect your MFC from your computer if you have already connected an interface cable. Turn on your computer.
For Windows 2000 Professional, you must be logged on as the Administrator.
Insert the CD-ROM into the CD-ROM drive.
Insert the MFC Software Suite CDROM into your CD-ROM drive. If the model name screen appears, click on your model name.
Click your language. The CD-ROM main menu will appear.

Click Install Software.

Click MFC Software Suite in Main Application, and then click Install. Please see Note *1.
The InstallShield Wizard Setup window will appear briefly, followed by the PaperPort Setup window. Click Yes.

When the PaperPort Setup window displays your Name and Company, either change or accept them, and then click Next.
When the Choose Destination Location window displays the path where the PaperPort files will be installed, either change or accept, and then click Next.
When the Register Today screen appears, click Next. This is registration for Paper Port. Follow the instructions.
When the MFC Software Suite Installation window appears, click Next to begin installing the MFC Software Suite. Please see Note *2.

For Parallel

For USB

10. When the Setup Type

window appears, select Standard, and then click Next. The application files will be copied to your computer.
11. The Connect Cable window will

appear.

*1 MFC Software Suite includes Printer Driver, Scanner Driver, ScanSoft PaperPort, ScanSoft Text Bridge, PC-FAX software, Remote Setup and True Type fonts. PaperPort is a document management application for viewing scanned documents. ScanSoft TextBridge, which is integrated into PaperPort, is an OCR application that converts an image into text and inserts it into your default word processor package.
*2 If an error message appears during the installation process, or you have previously installed MFC Software Suite or MFL Pro, you will first have to uninstall it. From the Start menu, select Programs, Brother, Brother MFL Pro, Uninstall, and then follow the instructions on the screen. 2
109876543210987654321 109876543210987654321

Please see NEXT PAGE

*3 Even if you select NO, later you will be able to launch the Brother Control Centre to use the Scan keys. See AutoLoad the Brother Control Centre, Chapter 13 in the Owners Manual on the CD-ROM.

Step 4.

Connect the MFC to your PC with Parallel Cable.
Connect the parallel interface cable to the parallel interface port of the MFC and secure the wire clips. Connect the interface cable to the printer port of the computer and secure it with the two screws. For the location of your computers parallel printer port, see the Users Guide for your computer.
For Parallel interface cable users

Step 5. Step 6.

Turn on the MFC by plugging in the power cord. The installation of the Brother driver will automatically start. Follow the instructions on the screen.
( For Windows 2000 Professional User )
( For Windows 95/98/98SE/Me Users )

In the Connect Cable window, click Next.
When the above screen appears, click Finish and wait as the PC restarts Windows and continues the installation.
When the above screen appears, Click Finish and wait as the PC restarts Windows and continues the installation.
Click Yes to have the Control Centre loaded each time Windows is started. The Control Centre will appear as an icon in the task tray. If you click No the Scan keys on the MFC will be disabled. Please see Note *3.
The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete.
When the Digital Signature Not Found dialog boxes appear, click Yes to install the driver.

Step 5.

Turn on the MFC by plugging in the power cord. Connect the MFC to your PC with the USB cable (it will take a few seconds for the installation screen to appear). The installation of the Brother driver will automatically start. Follow the instructions on the screen.
( For Windows 98/98SE/Me Users ) ( For Windows 2000 Users )

Step 6.

For USB interface cable users
In the Add Printer Wizard window, select BRUSB: USB Printer Port, and then click Next.
Accept the default Printer name by selecting Yes, and then click Next.
Select Yes (recommended), and then click Finish. A test page will be printed so you can check the print quality.
If the test page is printed correctly, click Yes. If you click No, follow the prompts on the screen to correct the problem.
Select Yes to restart your computer, and then click Finish.
Select Finish to restart your computer.
For Windows NT Workstation Version 4.0 Users

Step 1.

Check that your computer is turned on.

Step 3. Step 4.

Turn on the MFC by plugging in the power cord. Follow the instructions on the screen.
11. Select Yes to restart your computer, and

then click Finish.

You must be logged on as the Administrator.

Step 2.

Connect the MFC to your PC with the Parallel Cable.

(Same step as Windows 95/98/98SE/Me/2000 Users Step 3. , 1-10)
12. Click Yes to have the Control Centre
loaded each time Windows is started. The Control Centre will appear as an icon in the task bar. If you click No, the Scan keys on the MFC will be disabled. Please see Note *3.

For Apple Macintosh

QuickDraw Driver for OS 8.6/9.0/9.0.4/9.1 Users
Make sure your MFC power cord is unplugged and your Macintosh is turned on.

Step 3.

Restart your Macintosh so it can recognize the new driver. Connect the MFC to your Macintosh with the USB cable, and then turn on the MFC by plugging in the power cord.
Make sure you do NOT connect your MFC to your Macintosh
Insert the CD-ROM into your CDROM drive.
Installing MFC Software Suite
When the window appears, doubleclick MFC Software Suite Installer.

Select your language

Click your language to install the printer and scanner drivers. After the installation is completed, the screen prompts you to restart your Macintosh.

Select the Printer.

From the Apple menu, open the Chooser. Click to highlight the printer driver icon you installed. On the right side of the Chooser, select the printer to which you want to print. Close the Chooser.
What is included on the CD-ROM

Windows

You can get a variety of information from this CD-ROM Install Software You can install printer and scanner drivers and the various utility items. Manuals View the Owners Manual and other documentation. Brother Solutions Centre Connect to the Brother Solutions Centre, the Service and Support Web Site for your Brother Product. Further information Interactive Demonstration showing features of the Printer Driver. You can get a variety of information from this CD-ROM

Macintosh

MFC Software Suite Installer You can install the printer and scanner drivers and the various utility items. ReadMe! You can get important information and troubleshooting tips. Documents View the Owners Manual and other documentation.

(For Macintosh)

(For Windows)

Version A

FACSIMILE EQUIPMENT
PARTS REFERENCE LIST MODEL: MFC9660 / FAX8360P FAX8370
(For Germany / United Kingdom / France / Norway / Belgium / Netherlands / Switzerland / Ireland / Finland / Denmark / Austria / Spain / Italy / South Africa / Sweden ) (For Australia / New Zealand / Asia / China )
Copyright Brother 2002 All rights reserved No part of this publication may be reproduced in any form or by any means without permission in writing from the publisher. Specifications are subject to change without prior notice.
NOTES FOR USING THIS PARTS REFERENCE LIST
1. In the case of ordering parts, it needs mentioning the following items: (1) Code (2) Q' ty (3) Description Note: No orders without Parts Code or Tool No. can be accepted. [Example] (1)

REF.NO. CODE

DESCRIPTION RECOMMEND REMARKS
Parts change will be informed by the technical information.

COUNTRIES

GERMANY ---- GER UNITED KINGDOM ---- UK FRANCE ---- FRA NORWAY ---- NOR BELGIUM ---- BEL NETHERLANDS ---- NLD SWITZERLAND ---- CHE IRELAND ---- IRE FINLAND ---- FIN DENMARK ---- DEN AUSTRIA ---- AUS SPAIN ---- SPA ITALY ---- ITA SOUTH AFRICA ---- ZAF SWEDEN ---- SWE AUSTRALIA ---- ARL ASIA ---- ASA CHINA ---- CHN

LIST1 (MAIN FRAME)

REF No. 21 22
CODE LELJUL8984001 LJLE1166001 LG2423001 LJ4745001 UL9104001 UGLJ7403001 LJLJ5703001 UL8972001 UL8971001 UL8982001 UL8983001 UL8959001

Q'TY 1 1

DESCRIPTION MAIN MOTOR ASSY TAPTITE, CUP S M3X6 SOLENOID ASSY SCREW, BIND M3X4 FRONT COVER LINK TONER SENSOR (LED) PCB TAPTITE, CUP S M3X6 THERMISTOR FILM THERMISTOR ASSY FAN MOTOR UNIT TONER SENSOR (RECEIVER) PCB PAPER EJECTION SENSOR PCB TAPTITE, CUP S M3X6 RUBBER FOOT 2ND CASSETTE RELAY PCB SCREW, BIND B TITE M4X12 SOLENOID RELEASE SPRING P/R CLUTCH LEVER F/R CLUTCH LEVER DEVELOP JOINT JOINT SPRING FRICTION SPRING

RECOMMEND

REMARK

ORDER TO BIUK

MFC9660, FAX8360P, FAX8370

LIST2 (DOCUMENT SCANNER)

REF No. 1 1-1 1-2 1-3 1-4 1-5 1-6 1-7 1-11
CODE LE1164001 LE1072001 UL5632000 UF4369000 UF9009001 UUUU2006001 UU2008001 UU2027001 0A4300605 UU2028001 LE7949001 UU2029001 LE1196001 UL6244002 UU2009001 UU2031001 087311016

Q'TY 2

DESCRIPTION DOCUMENT SCANNER ASSY DOCUMENT SEPARATION ROLLER ZLM DOCUMENT SEPARATION ROLLER GEAR 43 PRESSURE ROLLER SHAFT PRESSER ROLLER PRESSER ROLLER LEAF SPRING TAPTITE, CUP B M3X8 DOCUMENT TAKE-IN ROLLER SHAFT ASSY, WHITE SEPARATION ROLLER SHAFT ASSY, BLACK SCANNER MOTOR SCREW, PAN (WASHER) M3X6 CIS SPRING CIS UNIT (SP) DOCUMENT FEED ROLLER DOCUMENT FEED ROLLER GEAR PINCH ROLLER PINCH ROLLER SPRING EJECTION ROLLER TAPTITE, CUP B M3X10

RECOMMEND

LIST3 (LASER UNIT)

REF No. 1 2

CODE LJ5828001 087321615
Q'TY LASER UNIT ASSY(SP) TAPTITE, CUP S M3X16

DESCRIPTION

LIST4 (PAPER TRANSPORT)

REF No. 19

CODE UL9059001 UL9060001 UL9062001 UL9066001 UL9062001 UL9069001 LJ4499001 LJ4843001 LJ5591001 UL9070001 UL8985001 LJ5705001 LJ5838001 UL9049001 UL9050001 UL9051001 UU2042001 UL9053001 UL9052001
DESCRIPTION JOINT PAPER FEED ROLLER ASSY PAWLED BUSHING PAPER PICK-UP ROLLER ASSY PAWLED BUSHING CONDUCTIVE BUSHING ELECTRODE SPRING OUTER CHUTE 1 (SP) PLANET GEAR ASSY (SP) GEAR 21 GEAR 59 GEAR 21 PRESSURE PLATE PLANET GEAR ASSY B (SP) MANUAL INSERTION SENSOR ACTUATOR REGISTRATION SENSOR ACTUATOR REGISTRATION SENSOR SPRING CASSETTE SENSOR ACTUATOR TRANSFER ARM TRANSFER SPRING

ADD ADD

LIST5 (PAPER TRAY)

REF No. 1

CODE LE1162001

Q'TY 1

DESCRIPTION PAPER TRAY ASSY, LEGAL, MFC9660 FOR GER/UK/FRA/NOR/BEL/NLD/CHE/IRE/FIN/DEN/AUS/SPA/ITA/ZAF/SW E (SP) PAPER TRAY ASSY, MFC9660 FOR ARL/NZ/ASA, FAX8360P, FAX8370 (SP) SIDE GUIDE L, BLUE(6155) SIDE GUIDE R, BLUE(6155) SCREW, CUP B M2.6X5 PAPER REAR GUIDE, BLUE(6155) SEPARATION PAD SUPPORT ASSY SEPARATION PAD SPRING

1 1-1 1-2 1-3 1-4 1-5 1-6
LJ4181001 UL9078001 UL9079001 U73515001 UL9083001 UL9084001 UL9090001

LIST6 (HEAT FIXING UNIT)

REF No. 1 1-1 1-2 1-3 1-4 1-5 1-6 1-7 1-8 1-9 1-10 1-11 1-12 1-13 1-14 1-15 1-16 1-17 1-18 1-19 1-20 1-21 1-22 1-23 1-24 1-25 1-26 1-27 1-5 6
CODE LJ7162001 LJ5682001 UH3635001 LJ5684001 UL8908001 LJ5695001 LJ5276001 LJ5277001 LJ5278001 LJ5279001 LJLJLJ5734001 LJ5732001 LJ5736001 LJUL8916001 LJ5690001 LJ5268001 LJ5287001 UL8920001 ULUL8923001 LM2047001 ULLJ4740001 LJ4432001 LJ8841001 085311015
DESCRIPTION FIXING UNIT, 230V (SP) CLEANER ASSY CLEANER SPRING 30 HEAT ROLLER 25 HR BEARING 25 HALOGEN LAMP, 230V EJECT PINCH ROLLER HOLDER L EJECT PINCH ROLLER HOLDER R EJECT PINCH ROLLER EJECT PINCH SPRING PICK OFF FINGER ASSY C TAPTITE, CUP B M3X6 THERMISTOR ASSY SCREW, BIND B TITE 3X12 EJECT ACTUATOR 2 EJECT ACTUATOR SPRING 2 ACTUATOR HOLDER EJECT ACTUATOR 3 SCREW, BIND B TITE 3X10 PR BEARING PR SPRING CLEANER PINCH ROLLER ASSY PRESSURE ROLLER 25 PAPER EJECT ACTUATOR EJECT ACTUATOR SPRING TAPTITE, CUP B M3X20 FU DRIVER GEAR IDLE GEAR 13 HR GEAR 34 TAPTITE, CUP S M3X8 SHOULDER SCREW TAPE 32X12 JAM SENSOR PCB ASSY SCREW, BIND B TITE 3X10

chg add

LIST7 (COVER)

REF No. 7-1 7-35 36

CODE LJ5751001 UL9122001 UL9125001 LJ5763001 UL9127001 UL9128001 UU2102003 LE8478001 UUUL9140001 ---------UU2045001 UU2002001 0A5401006 UU2003001 UL9142001 LJ4125001 LE1242001 UF6114008 UF6114009 UF6115008 UF6115009 UF4417000 UF4418001 UF5034001 LG2210001 UU2048001 UF8166008 LE1023001 UG5030001 UF---UF9823001 UF5745000 LE8190001
DESCRIPTION MAIN COVER ASSY, GRAY(1495) PINCH ROLLER ASSY PINCH ROLLER SPRING OUTER CHUTE, GRAY(1495) CHUTE SPRING L CHUTE SPRING R FRONT COVER ASSY, EXCEPT FOR FAX8370, GRAY(1495) FRONT COVER ASSY, FAX8370, GRAY(1495) FRONT SUB COVER, GRAY(1495) TAPTITE, CUP B M3X8 PAPER SUB TRAY, GRAY(1495) NOT USED NOT USED NOT USED SWITCH COVER, GRAY(1495) REAR COVER, GRAY(1495) SCREW, PAN (S/P WASHER) M4X10 TOP COVER, GRAY(1495) EXIT ROLLER ASSY ANTI-STATIC BRUSH (LONG) ANTI-STATIC BRUSH (SHORT) DOCUMENT GUIDE, L, EXCEPT FOR FAX8370, GRAY(1495) DOCUMENT GUIDE, L, FOR FAX8370, CLEAR PURPLE(6342) DOCUMENT GUIDE, R, EXCEPT FOR FAX8370, GRAY(1495) DOCUMENT GUIDE, R, FOR FAX8370, CLEAR PURPLE(6342) GUIDE GEAR SPRING, COMPRESSION TAPTITE, B 3X6 SPEAKER UNIT HANDSET HOLDER ASSY, FAX8370 LOWER HANDSET HOLDER, FAX8370 DUMMY COVER, EXCEPT FOR FAX8370 HOOK PCB ASSY, FAX8370 ACTUATOR HOOK, FAX8370 TAPTITE, CUP B M3X10 NOT USED TAPTITE, BIND S M3X8 TAPTITE, CUP S M3X10 SHOULDER SCREW MJ COVER FOR GER/UK/FRA/BEL/FIN/DEN/AUS/ITA/ZAF/SWE SUB BACK COVER, FAX8360P

RECOMMEND REMARK

add add

add add add add

LIST8 (CONTROL PANEL)
REF No. 1-1 1-2 1-3 1-4 1-4 1-5 1-6 1-7 1-8 1-9 1-10 1-11 1-12 1-13 1-14 1-15 1-16 1-17 1-18 1-19 1-20 1-21 1-22 1-23 1-24 1-25 1-26 1-27 1-5 6
CODE LE7308001 LE8071001 UU2004001 UF8176008 UF4576008 UF9118006 UF9118006 UF5581010 UF4393007 UU7099008 UU7100008 UF8174009 UF8173004 UF8172006 LG2212001 UG4552000 LE1155001 UU2005001 UU2051001 UU2052001 UU2053001 UU2054001 UU2055001 UU2056001 UF5034001 UU2057001 LE6342001 UU2061001 UU2062001 LEUU2063002 LE7319001 LE8173001 LE7329001 LE8177001 LE7333001 LE8181001 LE7691001 LE8209001 LE7692001 LE7693001 LE7694001 LE8219001 LE7695001 LE7696001 LE8222001 LE7856001 LE8231001 LE8450001 UU2067001 LE1509001 LE1706001 LE7304001

Q'TY 2 3

DESCRIPTION CONTROL PANEL ASSY, MFC9660 CONTROL PANEL ASSY, FAX8360P/FAX8370 CONTROL PANEL, GRAY(1495) KEY, ONE TOUCH, GRAY(1495) KEY, SHIFT, GRAY(1495) KEY, FUNCTION, GRAY(1495), MFC9660 KEY, FUNCTION, GRAY(1495), FAX8360P/FAX8370 KEY, FUNCTION91, GRAY(1495) KEY, TEN, GRAY(1495) KEY, VOLUME, GRAY(1495) KEY, COPY AREA, GRAY(1495) KEY, COPY, GREEN(5159) KEY, STOP, PINK(2205) KEY, START, PURPLE(6255) CONTROL PANEL PCB ASSY LCD FPC KEY (SP) PANEL REAR COVER DOCUMENT NIP PIECE SPRING DOCUMENT NIP PIECE ADF SPRING SPILLING PLATE, B SEPARATION RUBBER SPRING PLATE, A TAPTITE, B 3X6 DOCUMENT PRESSURE SPRING DOCUMENT PRESSURE BAR ASSY DOCUMENT FRONT SENSOR ACTUATOR DOCUMENT REAR SENSOR ACTUATOR ANTI-STATIC BRUSH TAPTITE, CUP B M3X8 LCD SHEET PANEL SHEET, MFC9660 FOR GER/AUS PANEL SHEET, FAX8360P FOR GER/AUS PANEL SHEET, MFC9660 FOR UK/BEL/NLD/CHE/IRE/ZAF PANEL SHEET, FAX8360P FOR UK/BEL/NLD/CHE/IRE/ZAF/GNR PANEL SHEET, MFC9660 FOR FRA PANEL SHEET, FAX8360P FOR FRA PANEL SHEET, MFC9660 FOR NOR PANEL SHEET, FAX8360P FOR NOR PANEL SHEET, MFC9660 FOR FIN PANEL SHEET, MFC9660 FOR DEN PANEL SHEET, MFC9660 FOR SPA PANEL SHEET, FAX8360P FOR SPA PANEL SHEET, MFC9660 FOR ITA PANEL SHEET, MFC9660 FOR SWE PANEL SHEET, FAX8360P FOR SWE PANEL SHEET, MFC9660 FOR ARL/NZ/ASA PANEL SHEET, FAX8360P FOR ARL/NZ/ASA PANEL SHEET, FAX8370 ADDRESS LABEL, EXCEPT FOR MFC9660 ZAF, GRAY(1495) ADDRESS LABEL, MFC9660 FOR ZAF, GRAY(1495) HOLE SHIELD FILM ANTI-STATIC SUB BRUSH

add ADD

LIST9 (PCB ASSY)
CODE LG4034001 LG3928001 LG4039001 LG2295061
DESCRIPTION MAIN PCB ASSY, MFC9660 MAIN PCB ASSY, FAX8360P MAIN PCB ASSY, FAX8370 NCU PCB ASSY FOR GER/UK/FRA/NOR/BEL/NLD/CHE/IRE/FIN/DEN/AUS/SPA/ ITA/ZAF/SWE/GNR NCU PCB ASSY FOR ARL/NZ NCU PCB ASSY FOR ASA NCU PCB ASSY, FAX8370 LOW VOLTAGE POWER SUPPLY PCB ASSY, 230V EXCEPT FOR ASA/CHN LOW VOLTAGE POWER SUPPLY PCB ASSY, 230V FOR ASA/CHN HIGH-VOLTAGE POWER SUPPLY ASSY (SP) ENGINE PCB ASSY TAPTITE, CUP S M3X6 SCREW, FLAT S M3X8 SCREW, PAN(WASHER)M3.5X6 SCREW, BIND B TITE M4X12 BATTERY BATTERY HARNESS

RECOMMEND

LG2819002 LG2821002 LG2820070 LG4016001 LG4023001 LJ5831001 LG084320815 0ALG3623001 LG3624001

LIST10 (ACCESSORIES)

REF No. 9 (10) (10) (10) (11) (11) (11) (11) (11)
CODE UF6857010 LG2358001 LG2359001 LG2360001 LG2361001 LG2162001 LG3661001 LG2085001 LG2086001 LJ9353001 UG3625001 UG3626001 UG3627001 UG3629001 UG1575001 LG3077001 UG3469000 UG3632001 UG3633001 UG4205001 UG3634001 UG3635001 UG3290001 UU2080008 UU2069008 UF7204008 LE7320001 LE7860001 LE7857001 LE7960001 LE8155001 UG4558001 LE7699001 LG3622001 LG3509001 UG1573000 LE8773001 LE8775001 LE8776001 LE8774001 LE8917001
DESCRIPTION HANDSET ASSY, FAX8370 AC CORD ASSY, EUR VDE FOR GER/FRA/NOR/BEL/NLD/FIN/AUS/SPA/ITA/SWE/GNR AC CORD ASSY, EUR BS FOR UK/IRE AC CORD ASSY, EUR SEV FOR CHE AC CORD ASSY, EUR DEMCO, FOR DEN AC CORD ASSY, SAA FOR ARL/NZ AC CORD ASSY, SAF FOR ZAF AC CORD ASSY, VDE FOR ASA AC CORD ASSY, BS, FOR ASA AC CORD ASSY LF FOR CHN TELEPHONE LINE CORD FOR GER TELEPHONE LINE CORD FOR UK/ZAF TELEPHONE LINE CORD FOR FRA TELEPHONE LINE CORD FOR NOR TELEPHONE LINE CORD FOR BEL TELEPHONE LINE CORD FOR NLD/IRE/SPA/ASA/ARL/GNR/CHN, FAX8360P FOR NZ TELEPHONE LINE CORD FOR CHE TELEPHONE LINE CORD FOR FIN TELEPHONE LINE CORD FOR FIN TELEPHONE LINE CORD FOR AUS TELEPHONE LINE CORD FOR ITA TELEPHONE LINE CORD FOR SWE TELEPHONE LINE CORD FOR NZ, FAX8360P FOR ARL DOCUMENT SUPPORT, CLEAR PURPLE(6342) DOCUMENT TRAY, CLEAR PURPLE(6342) HANDSET CURLED CORD LL ASSY, FAX8370 CD-ROM ASSY, MFC9660 FOR GER/UK/FRA/CHE/IRE/AUS/ZAF CD-ROM ASSY, MFC9660 FOR NOR/DEN/SWE CD-ROM ASSY, MFC9660 FOR SPA/ITA CD-ROM ASSY, MFC9660 FOR BEL/NLD/FIN CD-ROM ASSY, MFC9660 FOR ARL/NZ/ASA I/F CABLE, MFC9660 FOR GER/UK/IRE/AUS/ARL/NZ/ASA FERRITE CORE BAG ASSY FOR ARL/ASA TELEPHONE PLUG FOR NLD TELEPHONE PLUG FOR ARL, FAX8360P FOR NZ TELEPHONE PLUG FOR BEL CD-ROM ASSY XP, MFC9660 FOR GER/UK/FRA/CHE/IRE/AUS/ZAF CD-ROM ASSY XP, MFC9660 FOR NOR/DEN/SWE CD-ROM ASSY XP, MFC9660 FOR BEL/NLD/FIN CD-ROM ASSY XP, MFC9660 FOR SPA/ITA CD-ROM ASSY , FOR FAX8370

RECOMMEND

REMARK add

ORDER TO BIUK

CHG

add add add add add

LIST11 (PRINTED MATERIAL)

REF No. (1)

CODE LE7324001
DESCRIPTION OWNER'S MANUAL ASSY, MFC9660 FOR GER/AUS (INCLUDING OWNER'S MANUAL(1-1), PAN EURO WARRANTY LEAFLET, LICENSE AGREEMENT SHEET) OWNER'S MANUAL ASSY, FAX8360P FOR GER/AUS (INCLUDING OWNER'S MANUAL(1-1), PAN EURO WARRANTY LEAFLET) OWNER'S MANUAL ASSY, MFC9660 FOR UK (INCLUDING OWNER'S MANUAL(1-1), PAN EURO WARRANTY LEAFLET, LICENSE AGREEMENT SHEET, 2 WARRANTY CARDS) OWNER'S MANUAL ASSY, FAX8360P FOR UK (INCLUDING OWNER'S MANUAL(1-1), PAN EURO WARRANTY LEAFLET, 2 WARRANTY CARDS) OWNER'S MANUAL ASSY, MFC9660 FOR FRA (INCLUDING OWNER'S MANUAL(1-1), PAN EURO WARRANTY LEAFLET, LICENSE AGREEMENT SHEET, WARRANTY CARD) OWNER'S MANUAL ASSY, FAX8360P FOR FRA (INCLUDING OWNER'S MANUAL(1-1), PAN EURO WARRANTY LEAFLET, WARRANTY CARD) OWNER'S MANUAL ASSY, MFC9660 FOR NOR (INCLUDING OWNER'S MANUAL(1-1), PAN EURO WARRANTY LEAFLET, LICENSE AGREEMENT SHEET) OWNER'S MANUAL ASSY, FAX8360P FOR NOR (INCLUDING OWNER'S MANUAL(1-1), PAN EURO WARRANTY LEAFLET) OWNER'S MANUAL ASSY, MFC9660 FOR BEL (INCLUDING 2 OWNER'S MANUALS(1-1), PAN EURO WARRANTY LEAFLET, LICENSE AGREEMENT SHEET) OWNER'S MANUAL ASSY, FAX8360P FOR BEL (INCLUDING 2 OWNER'S MANUALS(1-1), PAN EURO WARRANTY LEAFLET) OWNER'S MANUAL ASSY, MFC9660 FOR NLD (INCLUDING OWNER'S MANUAL(1-1), PAN EURO WARRANTY LEAFLET, LICENSE AGREEMENT SHEET) OWNER'S MANUAL ASSY, FAX8360P FOR NLD (INCLUDING OWNER'S MANUAL(1-1), PAN EURO WARRANTY LEAFLET) OWNER'S MANUAL ASSY, MFC9660 FOR CHE (INCLUDING 2 OWNER'S MANUALS(1-1), PAN EURO WARRANTY LEAFLET, LICENSE AGREEMENT SHEET) OWNER'S MANUAL ASSY, FAX8360P FOR CHE (INCLUDING 2 OWNER'S MANUALS(1-1), PAN EURO WARRANTY LEAFLET) OWNER'S MANUAL ASSY, MFC9660 FOR IRE (INCLUDING OWNER'S MANUAL(1-1), PAN EURO WARRANTY LEAFLET, LICENSE AGREEMENT SHEET) OWNER'S MANUAL ASSY, FAX8360P FOR IRE (INCLUDING OWNER'S MANUAL(1-1), PAN EURO WARRANTY LEAFLET) OWNER'S MANUAL ASSY, MFC9660 FOR FIN (INCLUDING OWNER'S MANUAL(1-1), LICENSE AGREEMENT SHEET) OWNER'S MANUAL ASSY, MFC9660 FOR DEN (INCLUDING OWNER'S MANUAL(1-1), PAN EURO WARRANTY LEAFLET, LICENSE AGREEMENT SHEET) OWNER'S MANUAL ASSY, MFC9660 FOR SPA (INCLUDING OWNER'S MANUAL(1-1), PAN EURO WARRANTY LEAFLET, LICENSE AGREEMENT SHEET, WARRANTY CARD) OWNER'S MANUAL ASSY, FAX8360P FOR SPA (INCLUDING OWNER'S MANUAL(1-1), PAN EURO WARRANTY LEAFLET, WARRANTY CARD) OWNER'S MANUAL ASSY, MFC9660 FOR ITA (INCLUDING OWNER'S MANUAL(1-1), PAN EURO WARRANTY LEAFLET, LICENSE AGREEMENT SHEET) OWNER'S MANUAL ASSY, MFC9660 FOR ZAF (INCLUDING OWNER'S MANUAL(1-1), LICENSE AGREEMENT SHEET) OWNER'S MANUAL ASSY, FAX8360P FOR ZAF/GNR (INCLUDING OWNER'S MANUAL(1-1)) OWNER'S MANUAL ASSY, MFC9660 FOR SWE (INCLUDING OWNER'S MANUAL(1-1), PAN EURO WARRANTY LEAFLET, LICENSE AGREEMENT SHEET, WARRANTY CARD)