pleased

that you

chosen

Browning A-500G

shotgun.

It is certainly a gun you can be proud to own. It represents the state-of-the-art in modern gun design and manufacturing. The processes of design, testing and manufacturing were all assisted by advanced computer systems. The result is superior dependability, greater easeof-operation, smoother handling and more reliable overall function. With a reasonable amount of care, your A-500G shotgun should give you many years of dependable, enjoyable service. Please feel free to write us immediately if you have any observations regarding its performance and operation. Thank You.
Route One Morgan, Utah 84050 Distributed in Canada by Browning

Printed in Portugal

Canada

Sports

Ltd./Ltee,

St-Laurent,

Quebec
Browning A-5OOG Gas Operated Semi-Automatic Shotgun

NEW GUN OWNERS RECORD

KEEP THIS RECORD FOR FUTURE REFERENCE
Browning Model Serial Number Gauge / Caliber Purchase Price Purchased From Date of Purchase

You Are Firearms

Responsible Safety
1. ALWAYS KEEP THE MUZZLE OF YOUR
SHOTGUN POINTED IN A SAFE DIRECTION,
As a gun owner, you accept a set of demanding responsibilities. How seriously you take these responsibilities can be the difference between life and death. There is no excuse for careless or abusive handling of any firearm. At all times handle your shotgun and any other firearm with intense respect for its power and potential danger.
PLEASE READ AND UNDERSTAND ALL OF THE CAUTIONS, PROPER HANDLING PROCEDURES AND INSTRUCTIONS OUTLINED IN THIS BOOKLET BEFORE USING YOUR NEW FIREARM. 2.
even though you are certain the shotgun is unloaded. Never point any firearm at anything you do not intend to shoot. Be extremely alert and aware of all persons and property within the range of your ammunition.
NEVER RELY TOTALLY ON YOUR SHOTGUNS MECHANICAL SAFETY DEVICE.
The word safety describes a guns trigger block mechanism, sear block mechanism, hammer block mechanism or firing pin block mechanism. These mechanical devices are designed to place your gun in a Safer status. No guarantee can be made that the gun will not fire even if the safety is in the on safe position. The A-500G has a cross bolt
LIKE ANY MECHANICAL DEVICE, A SAFETY CAN SOMETIMES FAIL; IT CAN BE JARRED OR INADVERTENTLY MANIPULATED INTO AN UNSAFE CONDITION.
safety which blocks the guns trigger. See Operation of the Safety on page 14 for instructions on operation of this guns safety.
shotgun with the respect due a loaded, ready-to-fire firearm.
3. WHENEVER YOU HANDLE A FIREARM, OR HAND lT TO SOMEONE, ALWAYS OPEN THE ACTION IMMEDIATELY, VISUALLY CHECK YOUR SHOTGUNS CHAMBER, FEED MECHANISM AND MAGAZINE.
Mechanical safeties merely aid safe gun handling and are no excuse for pointing your shotguns muzzle in an unsafe direction. While it is a good idea to test your shotguns mechanical safeties periodically for proper function,
Make certain that they do not inadvertently contain any ammunition. Always keep the chamber empty and the safety in the on safe position unless shooting is imminent.
NEVER TEST THE SAFETY WHILE YOUR SHOTGUN IS LOADED OR POINTED IN AN UNSAFE DIRECTION.
4. DO NOT TRANSPORT YOUR SHOTGUN LOADED, WHETHER IN A SCABBARD, GUN CASE, OR OTHER CONTAINER. 5. HUNTING FROM ELEVATED SURFACES SUCH AS TREE STANDS IS DANGEROUS,
Safe gun handling does not stop with your guns mechanical safety devices it starts there. Always treat this
and may increase the risk of handling a firearm. The following rules should 3
4 always be observed by you and those you hunt with: Always make certain that the stand being used is safe and stable. Always make certain that your firearm is unloaded when it is being taken up and down from the stand. Always make certain that your firearm is not dropped from the stand, or dropped while it is being taken up or down from the stand. Remember, a loaded firearm may discharge when dropped, even with the safety in the on safe position.
6. BEWARE OF BARREL OBSTRUCTIONS, BEFORE CHECKING FOR A BARREL OBSTRUCTION, BE CERTAIN NO LIVE ROUND IS IN THE CHAMBER AND THAT THE MAGAZINE AND FEED MECHANISMS ARE COMPLETELY EMPTY. PLACE THE SAFETY IN THE ON SAFE POSITION
for the safety of both your gun and yourself. Mud, snow, and an infinite variety of other objects may inadvertently lodge in a barrel bore. It takes only one small obstruction to cause dangerously increased pressures that can ruin (swell or rupture) the finest shotgun barrels.
See page 23 for instructions on unloading). After assuring yourself that the shotgun is completely empty, again, open the breechblock, locking it to the rear, and look through the barrel to be sure it is clear of any obstruction. If an obstruction is seen, no matter how small it may be, clean the bore with a cleaning rod and patch as described in Cleaning and Maintenance Suggestions on page 44. Before the first firing, clean the bore with a cleaning rod and patch, and wipe away any anti-rust compounds in the action/ chamber areas.

7. ALWAYS UNLOAD YOUR SHOTGUN WHEN NOT lN USE. REFER TO PAGE 20 OF THIS INSTRUCTION BOOKLET EXPLAINING THE UNLOADING OF YOUR SHOTGUN.
As a safety precaution, it is preferable to disassemble your gun for storage. Store your gun and ammunition separately well beyond the reach of children. Take all safeguards to ensure your shotgun does not become available to untrained, inexperienced or unwelcome hands. The barrel and action of this shotgun have been made with substantial safety margins over the pressures developed by established American commercial loads. Nevertheless, Browning assumes no liability for incidents which occur through the use of cartridges of nonstandard dimensions which develop
USE THE PROPER AMMUNITION.
pressures in excess of commercially available ammunition which has been loaded in accordance with standards established by the Sporting Arms and Ammunition Manufacturers Institute (SAAMI).
BE ALERT TO THE SIGNS OF AMMUNITlON MALFUNCTION.
If you detect an off sound or light recoil when a shell is fired, Open the action and remove all shells from the magazine, chamber and action areas. With the action open, glance down the barrel to make sure that a wad or other obstruction does not remain in the barrel. Completely clear the barrel before loading and firing again. Failure to follow these instructions can cause extensive damage to your gun and possible serious injury to yourself and others.
DO NOT LOAD ANOTHER SHELL INTO THE CHAMBER.
Store all shells of different gauges in completely separate and well-marked containers. Do not store shells of mixed gauges in a common container or in your pockets.
EXAMINE EVERY SHELL YOU PUT IN YOUR GUN.
DO NOT PUT A 20 GAUGE SHELL IN A 12 GAUGE GUN.
10. CAUTION: DO NOT USE 3 1/2" SHOTGUN SHELLS IN ANY SHOTGUN OR BARREL WlTH A 2 3/4" OR 3" CHAMBER. DO NOT USE 3" SHELLS lN SHOTGUN CHAMBERED FOR 2 3/4" SHELLS. THE SIZE OF THE CHAMBER lS lNSCRlBED, ALONG WITH GAUGE AND CHOKE DESIGNATIONS, ON THE SIDE OF THE BARREL.
The most certain way to bulge or rupture a barrel is to drop a 20 gauge shell into a 12 gauge chamber. The 20 gauge shell, unfortunately, will not fall completely through the barrel; its rim is caught by the front of a 12 gauge chamber. Your gun will misfire (with the chamber appearing to be empty). It is then possible to load a 12 gauge shell behind the 20 gauge shell. If the 12 gauge shell is then fired, the result will be a so-called "12-20 burst" which can cause extensive damage to your gun and possible serious injury to you and others.
Your A-500 is chambered for factory 2 3/4" and 3" shells only.
11. DO NOT SNAP THE FIRING PIN ON AN EMPTY CHAMBER- THE CHAMBER MAY NOT BE EMPTY!
Treat every gun with the respect due a loaded gun, even though you are certain the gun is unloaded.
12. KEEP YOUR FINGERS A WAY FROM THE TRIGGER WHILE UNLOADING, LOADING, UNTIL YOU ARE READY TO SHOOT.

13. BESURE OF YOUR TARGET AND BACKSTOP.
Particularly, be sure during low light periods. Know the range of your ammunition. Never shoot at water or hard objects.
14. ALWAYS UNLOAD YOUR SHOTGUNS CHAMBER BEFORE CROSSING A FENCE, CLlMBlNG A TREE, JUMPING A DlTCH OR NEGOTlATlNG OTHER OBSTACLES.
muffs) to guard against such damage. Wear shooting glasses to protect your eyes from flying particles. Also, wear eye protection when disassembling and cleaning your shotgun to prevent the possibility of springs, spring-tensioned parts, solvents or other agents from contacting your eyes.
16. DROPPING A LOADED GUN CAN CAUSE AN ACCIDENTAL DISCHARGE
Refer to page 23 of this instruction book for instructions on the unloading of your shotgun. Never place your shotgun on or against a fence, tree, car, or other similar object.
WEAR EYE AND EAR PROTECTION WHEN SHOOTING.
even with the safety in the on safe position. Be extremely careful while hunting or during any shooting activity, to avoid dropping any firearm.
17. IF YOUR SHOTGUN FAILS TO FIRE, KEEP THE MUZZLE POINTED IN A SAFE DIRECTION.
Unprotected, repeated exposure to gunfire can cause hearing damage. Wear ear protectors (shooting ear plugs or
Hold this position for a minimum of 30 seconds. Carefully open the action and remove the cartridge. If the primer is indented, the cartridge should be 7
disposed of in a way that cannot cause harm. If the primer is not indented, your firearm should be examined by a qualified gunsmith and the cause of the malfunction should be corrected before further use.
18. BE DEFENSIVE AND ON GUARD AGAINST UNSAFE GUN HANDLING AROUND YOU AND OTHERS.
disassembly, cleaning and reassembly. Keep ammunition away from the cleaning location. Never test the mechanical function of any firearm with live ammunition.
20. EDUCATE AND SUPERVISE FIREARMS SAFETY TO ALL MEMBERS OF YOUR FAMILY- ESPECIALLY TO CHILDREN AND NONSHOOTERS.
Don't be timid when it comes to gun safety. If you observe other shooters violating any of these safety precautions, politely suggest safer handling practices.
Closely supervise newcomers to the shooting sports. Encourage enrollment in hunting/shooting safety courses.
19. BE CERTAIN YOUR SHOTGUN IS UNLOADED BEFORE CLEANING.
Because so many gun accidents occur when a firearm is being cleaned, special and extreme care should be taken to be sure your gun is unloaded before

FIGURE 1-B
A. B. C. D. E. F. G. H. I. J. K. Barrel Extension Guides Barrel Ring Guide/Gas Cylinder Front Action Springs Bolt Release Button (Carrier Latch Button) Breechblock Assembly Carrier Forearm Sleeve Bar Assembly Magazine Tube Magazine Cap Magazine Spring Retainer L. M. N. O. P. Q. R. S. T. U. Magazine Follower Magazine Spring Operating Handle Return Spring Rotary Bolt Head Three Shot Adapter Trigger Group Trigger Guard Retaining Nut Trigger Guard Retaining Screw Gas Piston
pressure regulation valve releases excess gas pressure that is not necessary for operating the action. This keeps bolt speed more consistent and allows you to shoot all factory 2 3/4" and 3"' loads interchangeably, without adjustment. As the piston moves the sleeve reward, the action bar -which extends from the sleeve pushes the breechblock rearward, operating the action. As the breechblock moves rearward, it turns and unlocks the 4-lug rotary bolt, recocks the hammer, and ejects the fired shell.
After full rearward travel, the breech-block returns forward, picking up a new shell from the magazine and chambering it automatically. After the last shell has been fired, the breechblock locks to the rear, instead of returning forward. This facilitates speedy, convenient reloading.
NOTE: The A-500G is delivered with the
magazine adaptor in the magazine which limits the gun to three shots, in accordance with federal migratory bird laws. If you do not want your gun to be so lim-
ited, merely take out the three shot adapter as explained on page 34 under Three Shot Adapter.

Serial

Number

Initial

Cleaning
The serial number of your A-500G shotgun is found on the left side of the receiver, at the lower rear, near the grip portion of the buttstock.

Ammunition

Various exposed metal parts of your new A500 have been coated at the factory with a rust preventative compound. Before assembling your A-500G, clean the anti-rust compound from the inside of the barrel, receiver and the action/ chamber areas. Browning Oil is ideal for removing this compound and for giving your new gun its first lubrication. However, any quality gun oil may be used. Use a cleaning rod and patch as explained under Cleaning and Maintenance Suggestions on page 44.
The A-500G has a 3-inch chamber and is designed to shoot and function with all 12 gauge factory loads: 3-inch Magnum, 2 3/4 Magnum, 2 3/4 High Velocity loads, 2 3/4 Field and 2 3/4 Target loads. It is especially suited to shooting factory steel shot loads. Loads can be intermixed, in any order. Browning can assume no responsibility for incidents which occur through the use of cartridges of nonstandard dimension or those developing pressures in excess of standards established by the Sporting Arms and Ammunition Manufacturers Institute (SAAMI).

Disassembly of Barrel System Components and Gas
Disassembly of the barrel from the receiver is important for cleaning and is also a convenient way to store your A-500G. 1. Unscrew the magazine cap. 2. Remove the forearm by sliding it forward on the magazine tube.
3. For cleaning, remove the gas piston and sleeve bar assembly by sliding them forward off of the magazine tube. It is not necessary to disassemble any part of the gas pressure regulation valve. See Cleaning and Maintenance Suggestions on page 44 for suggested cleaning procedures. If you are disassembling for storage, return the sleeve bar assembly and the gas piston onto the magazine tube as shown previously in Figure 6. Reinstall the forearm over the magazine tube and screw on the magazine cap. You will then have two compact units: the barrel, and the action with forearm and stock.
CAUTION: AFTER THE BARREL HAS BEEN REMOVED FROM YOUR GUN, LEAVE THE BREECHBLOCK IN THE OPEN POSITION. DO NOT PRESS THE BOLT RELEASE BUTTON,
If the breechblock is released forward with the barrel removed, the operating handle will be driven against the edge of the ejection port, which will cause damage to the receiver.

Loading Procedures

There are two basic methods for initially getting a loaded shell into the chamber of your A-500G.
CAUTION: AT ALL TIMES DURING THE LOADING PROCEDURE, BE SURE YOUR MUZZLE IS POINTING IN A SAFE DIRECTION AND THE SAFETY IS IN THE ON SAFE POSITION. REMEMBER: DO NOT PUT A 20 GAUGE OR 3 1/2 MAGNUM SHELL IN YOUR A-500G 12 GAUGE SHOTGUN. NEVER STORE SHELLS OF MIXED GAUGES IN A COMMON CONTAINER OR IN YOUR POCKETS.
20 See caution number 8 on page 5 of this booklet for an explanation.
CAUTION: WHENEVER A SHELL HAS BEEN CYCL ED INTO THE CHAMBER DURING LOADING OR ANY OTHER TIME, AUTOMATICALLY OR MANUALLY- THE SHOTGUN IS READY TO FIRE BY SIMPLY MOVING THE SAFETY TO THE OFF SAFE POSITION. METHOD ONE: LOADING THE CHAMBER THROUGH THE EJECTION PORT FIGURE 7
1. After making sure the safety is on safe, pull the operating handle to the rear until the breechblock locks in the open position.

VISUALLY INSPECT THE CHAMBER, CARRIER, AND MAGAZlNE TO MAKE SURE THEY ARE CLEAR OF ANY OBSTRUCTIONS.
2. While pointing the muzzle in a safe direction, hold your A-500G with the ejection port up, and insert a cartridge of the
proper gauge through the ejection port into the open breech (See Figure 7). Press the breechblock release button.
KEEP YOUR FINGERS CLEAROFTHE EJECTION PORT.
This will automatically cause the shell to be picked up and delivered to the chamber correctly. The chamber is now loaded. 3. With the chamber loaded, load the magazine to full capacity as explained below under Loading the Magazine.
METHOD TWO: LOADING THE CHAMBER MANUALLY FROM THE MAGAZINE
listed below. With the magazine loaded, and the breechblock closed, merely pull back on the operating handle, fully to the rear, and release it, allowing the breechblock to close. This will automatically cycle a shell from the magazine to the chamber. 3. To again load the magazine to full capacity, thumb another shell into the magazine as explained below under Loading the Magazine.
LOADING THE MAGAZINE 1. MAKE SURE THE MUZZLE IS POINTED IN A SAFE DIRECTION AND THE SAFETY IS IN THE ON SAFE POSITION.
1. Make sure the muzzle is pointed in a safe direction and the safety is in the on safe position. 2. To load the magazine, follow the instructions under Loading the Magazine
2. Close the breechblock by pressing the breechblock release button (as explained above).

FIGURE 8

sure the rim of the shell engages the carrier latch and is held fully inside the magazine tube. It will make an audible click when fully inserted. Repeat this procedure until the magazine is fully loaded.
CAUTION: WHENEVER A SHELL HAS BEEN CYCLED INTO THE CHAMBERAUTOMA TICAL L Y OR MANUAL L Y THE SHOTGUN IS READY TO FIRE BY SIMPLY MOVING THE "SAFETY" TO THE OFF SAFE POSITION.
3. Insert a shell, of the proper gauge, through the loading port at the bottom of the receiver, up into the magazine, using your thumb to position it fully forward in the magazine tube (See Figure 8). Make
MAKE SURE YOUR FINGERS ARE CLEAR OF THE EJECTION PORT.

MAGAZINE CAPACITY

With the three shot adapter installed, the magazine will hold TWO 2 3/4" or 3-inch shells. With the three shot adapter removed, the magazine holds FOUR 2 3/4" or THREE 3-inch shells.

Unloading

A-500G
CAUTION: WHENEVERUNLOADING, ALWAYS BECERTAIN THAT THE MUZZLE IS POINTED IN A SAFE DIRECTION AND THAT THE SAFETY IS IN THE ON SA FE POSITlON.

BROWNING DESCRIPTION PARTNO. P014155 Ejector P014160 Extractor P014164 Extractor Inner Spring P014168 Extractor Outer Spring P014172 Extractor Pin P014178 Firing Pin P014182 Firing Pin Cover P014186 Firing Pin Spring P014190 Firing Pin Stop Pin P014210 Front Sight P014215 Hammer P014220 Hammer Pin P014225 Magazine Cap P014230 Magazine Cap Retainer P014234 Magazine Cap With Eyelet P014240 Magazine Cutoff & Pin P014248 Magazine Cutoff Plunger Assembly P014262 Magazine Follower P014268 Magazine Spring P014274 Magazine Spring Retainer P014280 Magazine 3-Shot Adapter A-500 P014286 Mainspring P014290 Mainspring Guide P014294 Mainspring Guide Pin P014302 Operating Handle P208466 Recoil Pad P014320 Safety
4. Load the magazine as explained above under Loading the Magazine on page 23. EVEN WITH THE BREECH LOCKED OPEN AFTER SHOOTING, DO NOT ASSUME YOUR SHOTGUN IS UNLOADED. ALWAYS INSPECT THE CHAMBER, CARRIER AND MAGAZINE TUBE TO BE SURE THEY CONTAIN NO CARTRIDGES. THEN, REMEMBER TO ALWAYS TREAT ANY GUN AS IF IT WAS LOADED. ALWAYS HANDLE YOUR SHOTGUN WITH CAUTION. Operation of the Magazine Cut-off The magazine cut-off lever is located at the front end of the left side of the receiver. This cut-off has the purpose of locking the shells in the magazine so that they will not feed into the chamber. This permits you to quickly change the load in the chamber of the gun without going to the trouble of un-

FIGURE 9-A

FIGURE 9-B
loading the whole magazine. For instance, in this way a duck load can quickly be taken out and a goose load inserted, if the need arises. To operate the magazine cutoff, merely manipulate the lever to the MC or R positions. The MC position engages the magazine cutoff (See Figure 9A). The R position (See Figure 9-B) places the magazine in conventional repeater posi27
tion, chambering a shell from the magazine each time the breechblock cycles rearward (as when you shoot or manually cycle the breechblock). Also, with the magazine cutoff in operation, and with the chamber empty and the breechblock locked in the rearward position, a loaded shell may be instantly delivered from the magazine to the chamber by merely moving the lever from the MC position (magazine cut-off), to the R (repeater) position. When the breechblock is locked rearward, BECAREFUL TO KEEP YOUR FINGERS CLEAR OF THE LOADING PORT AND EJECTION PORT WHEN MOVING THE LEVER FROM MC TO R.

INVECTOR CHOKE TUBE CODE To identify individual Invector tubes, refer to the abbreviated indications on the side of the tube, or use the identification mark(s) located on the top rim of each tube (See Figure 21).

FIGURE 21

Rim Notches
I II III IIII IIIII No Notches Knurled Ext

Pattern With LeadShot

Full Imp. Modified Modified Imp. Cylinder Skeet Cylinder X-Full Special

Pattern With SteelShot

Full*** Full*** Modified Imp. Cylinder** Imp. Cylinder ***
*Not for use with steel shot Using an over-tight choke constriction with steelshot will result in an ineffective, "blown" pattern. **Extra Full Special with knurled rim and no rim code. Do not use with steel shot. ***When more than one choke designation is listed for a given steel shot pattern, use the more open choke listed for high velocity, larger shot size steel shot loads
are for Browning guns with back-bored barrels and are not for use on your A-500G. Before removing/installing tubes, or reading the rim notch code, make sure your shotgun is fully unloaded.
CAUTION: DO NOT USE STANDARD INVECTOR CHOKE TUBES IN BARRELS MARKED INVECTOR-PLUS. DO NOT USE INVECTOR-PLUS CHOKE TUBES IN BARRELS MARKED INVECTOR. FAILURE TO FOLLOW ALL OF THE ABOVE WARNINGS CAN DAMAGE YOUR GUN AND CAUSE INJURY TO YOURSELF AND OTHERS.
Use of Extra Barrels On all Browning A-500G shotguns, barrels of the same gauge are completely interchangeable, and no special fitting is required. Thus, by merely buying another barrel of a different length, or for a different purpose (such as a Buck Special barrel), and using the appropriate Invector choke tube, you have acquired the utility of another gun at a fraction of the cost of a new gun; a duck gun becomes a fine upland game gun, a pheasant gun becomes a rifled slug deer gun. Sight Adjustment Barrels for Buck Special
WINDAGE ADJUSTMENT To move point of impact to the RIGHT, loosen the small screw on the right side of the sight. Then tighten the small screw on the left side of the sight. To move point of impact to the LEFT loosen the small screw on the left side of the sight and tighten the screw on the right side. This is a process of trial and error. Make small adjustments then check the point of impact. VERTICAL ADJUSTMENT Adjustment of the sight is controlled by the screw located on top of the sight. To RAISE the point of impact, turn the screw in a counterclockwise direction. To LOWER the point of impact, turn the screw in a clockwise direction. Vertical adjustment is also a process of trial and error.

Buck Special barrels are equipped with a precision rear sight which is screw adjustable for both horizontal and vertical correction.

Cleaning and Suggestions

Maintenance

FIGURE 22

You should clean your A-500G whenever it becomes excessively dirty and perform a thorough cleaning at least once a year. The barrel should be cleaned, and the action wiped clean and oiled after every day of shooting. The gas system should require only occasional cleaning. If a malfunction occurs, perform a thorough cleaning, to see if it solves the problem, before seeking the services of a Browning Recommended Service Center, the Browning Service Facility in Arnold, Missouri, or a competent gunsmith. Normal maintenance can be accomplished with the barrel still attached to the receiver (oiling and wiping down). More careful cleaning requires removal of only the barrel from the receiver (cleaning the barrel), and the removal of several gas system
components. A complete cleaning requires removal of the breechblock and trigger group. PERIODIC OILING Ordinary good judgment will indicate that the metal parts of the gun should receive a light film of oil after the gun has been exposed to weather or handling. Occasionally, a small drop of oil may be
placed on the end of the action bar where it slides along the track in the receiver (See Figure 22). This will help to relieve friction and ensure smooth operation. Also, lightly lubricate the breechblock, rotary bolt and spring guides. If the gun has been exposed to much dust, dirt, mud or water, the principal working parts including the gas system, should be wiped clean and lubricated with a light film of oil. Browning Oil is recommended. DO NOT POUR LARGE QUANTlTlES OF OIL INTO THEACTION. A LARGE EXCESS OF OIL WILL RUN BACK INTO THE WOOD OFTHESTOCKAND CAUSE SOFTENING OFTHE WOOD, WITH CONSEQUENTIAL LOOSENING OFTHE STOCK. CLEANING THE BARREL The correct procedure for cleaning your A-500 shotgun is as follows:
BE CERTAIN YOUR SHOTGUNS MAGAZINE, FEED MECHANISM AND CHAMBER ARE UNLOADED. PLACE THE SAFETY IN THE ON SAFE POSITlON AND LOCK THE BOLT ON THE REAR. ALWAYS WEAR PROTECTIVE SAFETY GLASSES DURING ALL DISASSEMBLY AND CLEANING PROCEDURES.
2. Remove the barrel so that it can be cleaned from the breech end (See Disassembly on page 18). 3. Using a shotgun cleaning rod with tip and patch large enough for a snug fit in the bore, insert the rod and patch in the breech end of the barrel and run back and forth through the bore several times. Remove and wipe the Invector tube, tube threads and barrel threads, and lightly oil. 45

4. Inspect the bore from both ends for leading by looking through bore toward light. Leading will appear as dull longitudinal streaks and is usually more predominant near the muzzle and just forward of the chamber. 5. A normal amount of leading can be expected with todays high velocity loads and improved wads but this is not serious. If or when leading should become heavy, it can be removed with a brass bore brush. Make sure a choke tube is installed. Spray the bore or the bore brush with a good powder solvent, and scrub the bore until leading is removed. To prevent brass bristles from breaking off, the brush should be pushed completely through the bore before being withdrawn. 6. After leading has been removed, the bore should be wiped dry with a clean patch, and then a lightly oiled patch run through it for preservation.

FIGURE 23

CLEANING THE GAS SYSTEM 1. Remove the gas piston, sleeve bar assembly and return spring from the magazine tube. Spray the tube with Browning oil (or a good quality powder solvent) and wipe clean. Remove the return spring from the sleeve and wipe clean. Spray the inside of the sleeve and wipe off of any buildup.
2. To clean the gas system, first spray the gas piston with a good powder solvent and brush it thoroughly to remove any deposits (an old toothbrush is ideal for this). Spray into the gap between the inner and outer portions of the piston. 3. Clean the gas regulation valve system (it is located inside the barrel ring guide/gas cylinder) by spraying it with a aerosol Browning Oil or a good powder solvent, and brushing any deposits free (See Figure 23). NEVER use a steel brush on any of the gas components. Pay special attention to the gas pressure vents (two large holes on opposite sides of the barrel ring guide/gas cylinder), and the two gas ports (seen inside the gas cylinder at the top, when viewed from the breech end). Spray again to wash away the loosened deposits and wipe clean. A NONFLAMMABLE sol-
vent bath can be used to immerse the parts, but it is not necessary. CAUTION: NEVER DISASSEMBLE THE GAS CYLINDER. The parts are under spring tension and require special tools for removal. It is not necessary to remove the gas pressure regulation valve assembly (from its location inside of the barrel ring guide/gas cylinder) to perform cleaning. You should note that all gas system parts on the A-500G have been given extra protection against corrosion: the magazine tube is chrome-plated, and all other gas system parts, including the piston, springs, barrel guide ring and gas regulation valve, are made from stainless steel. 4. Complete the cleaning of the gas system by applying a very light film of Browning Oil to all parts for protection and lubrication. 47
CLEANING THE ACTION AND TRIGGER GROUP 1. When the action becomes excessively dirty, remove the trigger group and breechblock assembly from the receiver as explained under Full Disassembly on page 28. Clean with an oil such as Browning Oil or a gun solvent as necessary, using an old toothbrush to loosen any caked-on grime. Wipe the receiver cavity clean. Lightly oil the cavity (aerosol Browning Oil is ideal) and wipe it dry. No further disassembly is required for cleaning. 2. Reassemble the trigger group, breechblock, gas system and the barrel to the receiver as explained previously. Then wipe all exposed metal surfaces with an oiled cloth making sure to wipe your A-500G clean of all finger marks where moisture will accumulate.

3. LIKE ANY MECHANICAL DEVICE, A "SAFETY" CAN SOMETIMES FAIL; IT CAN BE JARRED OR INADVERTENTLY MANIPULATED INTO AN UNSAFE CONDITION.
Mechanical "safeties" merely aid safe gun handling and are no excuse for pointing your shotgun's muzzle in an unsafe direction. While it is a good idea to "test" your shotgun's mechanical "safeties" periodically for proper function, never test them while your firearm is loaded or pointed in an unsafe direction. Safe gun handling does not stop with your gun's mechanical "safety" devices -- it starts there. Always treat this shotgun with the respect a loaded, ready-to-fire firearm. NEVER TEST THE
MECHANISM OF ANY FIREARM WHILE IT IS LOADED OR POINTED IN AN UNSAFE DIRECTION. 4. WHENEVER YOU HANDLE A FIREARM, OR HAND IT TO SOMEONE MAKE SURE IT IS COMPLETELY UNLOADED.
Always open the action immediately and visually check the chamber magazine. Make certain the chamber does not inadvertently contain any ammunition. Always keep the chamber empty and the "safety" in the "on safe" position unless shooting is imminent.
5. DO NOT TRANSPORT ANY FIREARM LOADED. KEEP ALL FIREARMS UNLOADED DURING TRANSPORT, WHETHER IN A SCABBARD, GUN CASE, OR OTHER CONTAINER. 6. HUNTING FROM ELEVATED SURFACES SUCH AS TREE STANDS IS DANGEROUS.
Doing so may increase the risk of handling a firearm. The following rules should always be observed by you and those you hunt with: Always make certain that the stand being used is safe and stable. Always make certain that your firearm is unloaded when it is being taken up and down from the stand. Always make certain that your firearm is not dropped from the stand, or dropped while it is being taken up or down from the stand. Remember, a loaded firearm may discharge when dropped, even with the safety in the "on safe" position.
BEWARE OF BARREL OBSTRUCTION.
Do this for the safety of both your gun and yourself. Mud, snow, and an infinite variety of other objects may inadvertently lodge in a barrel bore. It takes only one small obstruction to cause dangerously increased pressures that can ruin (swell or rupture) the finest shotgun barrel.
BEFORE CHECKING FOR A BARREL OBSTRUCTION, BE CERTAIN YOUR FIREARM IS FULLY UNLOADED.
Make sure no live rounds are in the chamber. Place the safety in the "on safe" position, open the breech or action and look through the barrel to be sure it is clear of any obstruction. If an obstruction is seen, no matter how small it may be, clean the bore with a cleaning rod and patch as instructed for your particular firearm. Before the first firing, clean the bore with a cleaning rod and patch, and wipe away any anti-rust compounds in the action/chamber areas.
8. ALWAYS UNLOAD ALL FIREARMS WHEN NOT IN USE.
As a safety precaution, it is preferable to disassemble your gun for storage. Your responsibilities do not end when your firearm is unattended. Store your gun and ammunition separately -- well beyond the reach of children. Take all safeguards to ensure your firearm does not become available to untrained, inexperienced or unwelcome hands.

9. USE THE PROPER AMMUNITION.
The barrel and action of all Browning firearms have been made with substantial safety margins over the pressures developed by established American commercial loads. Nevertheless, Browning assumes no liability for incidents which occur through the use of cartridges of nonstandard dimensions which develop pressures in excess of commercially available ammunition with standards established by the Sporting Arms and Ammunitions Manufacturers' Institute (SAAMI).
BE ALERT TO THE SIGNS OF AMMUNITION MALFUNCTION.
If you detect an off sound or light recoil when ammunition is fired, DO NOT LOAD MORE AMMUNITION INTO THE CHAMBER. Open the action and remove all ammunition from the chamber. With the action open, glance down the barrel to make sure that a wad or other obstruction does not remain in the barrel. If there is an obstruction, completely clear the barrel before loading and firing again. Failure to follow these instructions can cause extensive damage to your gun and possible serious injury to yourself and others. 10.
MAKE SURE OF ADEQUATE VENTILATION IN THE AREA THAT YOU DISCHARGE A FIREARM. WASH HANDS THOROUGHLY AFTER EXPOSURE TO AMMUNITION OR CLEANING A FIREARM.
Lead exposure can be obtained from discharging firearms in poorly ventilated areas, cleaning firearms or handling ammunition. Lead is a substance that has been known to cause birth defects, reproductive harm and other serious injury. 11. NEVER INSERT A SHELL OF THE INCORRECT GAUGE IN ANY SHOTGUN. The gauge of your shotgun is marked on the side of the barrel. Store all shells of different gauges in completely separate and well-marked containers. Never store shells of mixed gauges in a common container or in your pockets.
EXAMINE EVERY SHELL YOU PUT IN YOUR GUN. NEVER PUT A 20 GAUGE SHELL IN A 12 GAUGE GUN. The most common way to bulge or rupture a shotgun barrel is to drop a 20
gauge shell into a 12 gauge chamber. The 20 gauge shell, unfortunately, will not fall completely through the barrel; its rim is caught by the front of a 12 gauge chamber. Your gun will misfire (with the chamber appearing to be empty). It is then possible to load a 12 gauge shell behind the 20 gauge shell. If the 12 gauge shell is then fired, the result will be a so-called 12-20 burst which can cause extensive damage to your gun and possible serious injury to you and others.

USE SHELLS OF CORRECT LENGTH.
The size of the chamber is inscribed, along with gauge and choke designations, on the side of the barrel. Do not use 31/2" shotgun shells in a shotgun or barrel with a 2 3/4" chamber or 3" chamber. Do not use 3" shells in a shotgun chambered for a 2 3/4" shells. Doing so can result in a build-up of dangerously high pressures that may damage your gun and possibly cause serious injury to yourself or others. 13.
DO NOT SNAP THE FIRING PIN ON AN EMPTY CHAMBER -- THE CHAMBER MAY NOT BE EMPTY!
Treat every gun with the respect due a loaded gun, even though you are certain the gun is unloaded. 14.
KEEP YOUR FINGERS AWAY FROM THE TRIGGER WHILE LOADING AND UNLOADING UNTIL YOU ARE READY TO SHOOT.
15. BE SURE OF YOUR TARGET AND BACKSTOP. Particularly during low light periods. Know the range of your ammunition. Never shoot at water or hard objects. 16. ALWAYS UNLOAD THE CHAMBER AND MAGAZINE OF ANY FIREARM BEFORE CROSSING A FENCE, CLIMBING A TREE, JUMPING A DITCH OR NEGOTIATING OTHER OBSTACLES. Never lean or place your loaded shotgun on or against a fence, tree, car or other similar object. 17. WEAR EYE AND EAR PROTECTION WHEN SHOOTING. Unprotected, repeated exposure to gunfire can cause hearing damage. Wear ear protectors (shooting earplugs or muffs) to guard against such damage. Wear shooting glasses to protect your eyes from flying particles. Always keep a safe distance between the muzzle of your firearm and any persons nearby, as muzzle blast, debris and ejecting shells could inflict serious injury. Also, wear eye protection when disassembling and cleaning all firearms to prevent the possibility of springs, springtensioned parts, solvents or other agents from contacting your eyes.
18. DROPPING A LOADED GUN CAN CAUSE AN ACCIDENTAL DISCHARGE.
This can occur even with the "safety" in the "on safe" position. Be extremely careful while hunting or during any shooting activity to avoid dropping any firearm.
19. IF ANY FIREARM FAILS TO FIRE, KEEP THE MUZZLE POINTED IN A SAFE DIRECTION.
Hold this position for a minimum of 30 seconds. Carefully open the action and remove the shell. If the primer is indented, the shell should be disposed of in a way that cannot cause harm. If the primer is not indented, your firearm should be examined by a qualified gunsmith and the cause of the malfunction should be corrected before further use.
20. BE DEFENSIVE AND ON GUARD AGAINST UNSAFE GUN HANDLING AROUND YOU AND OTHERS. Dont be timid when it comes to gun safety. If you observe other shooters
violating any of these safety precautions, politely suggest safer handling practices.
21. BE CERTAIN YOUR SHOTGUN IS UNLOADED BEFORE CLEANING.
Because so many accidents occur when a firearm is being cleaned, special and extreme care should be taken to be sure your gun is unloaded before disassembly, cleaning and reassembly. Keep ammunition away from the cleaning location. Never test the mechanical function of any firearm with live ammunition.

609-861-0750 908-561-4956 609-585-4440 701-282-0133 740-625-7811 740-432-3204 918-742-3981 503-256-5166
Browning Gun Parts Price List
UNITED STATES (CONTINUED) Reesers Guns Southland Gun Works Sioux Fall Scheels Sodak Sport & Bait W H McGuns Elk Castle Shooting Freer Gunshop McBrides Guns McClelland Gunshop Nagels Gun Shop Payson Sports & Trophy Bob Moates Sport Shop Gander Mountain Midwestern Shooter Supply Precision Gun Works #2 Newport Road PO Box Harry Byrd Highway 2101 West 41st Street 850 South Highway North 22nd Avenue 8240 I-30 West 8928 Spring Branch Drive 2915 San Gabriel 1533 Centerville Road 6201 San Pedro Avenue 15 East 100 North 212 David Bruce Avenue 6801 120th Avenue 191 Church Street 4717 State Road 44 CANADA Bashaw Sports Centre Genes Gunsmithing LArmurier Alain Bouchard Inc. Magasin Latulippe Randys Gun Repair Complete Gunsmithing Sr. W R Longs LTD 5012- 50th Street Box 34 GRP 326 RR Route 143 637, rue Saint-Vallier Quest P.O. Box OLeary Avenue 4992 Rice Lake Drive North Bashaw Selkirk Ulverton Quebec Tabusintac St. Johns Bewdley AB MB QC QC NB NF ON TOBOHO R1A 2A8 J0B 2BO G1N 1C6 E9H 1Z5 A1B2C9 K0L1E0 780-372-4440 204-757-4413 819-826-6611 418-529-0024 506-779-4768 709-738-6310 905-797-2700 780-372-4447 204-757-4728 819-826-6885 418-529-6381 709-722-0622 905-797-2650 Duncannon Darlington Sioux Falls Aberdeen Humboldt Ft. Worth Houston Austin Dallas San Antonio Payson Charlotte Court House Kenosha Lomira Oshkosh PA SC SD SD TN TX TX TX TX TX UT VA WI WI WI 54904 717-834-6373 843-393-6291 605-334-7767 605-225-2737 731-784-5746 817-246-4622 713-467-3016 512-472-3532 214-321-0231 210-342-5420 801-465-7945 434-542-5536 262-857-3757 920-269-4995 920-233-2274 717-834-6372 843-393-9995 605-334-8936 605-229-2996 731-784-7661 713-467-2032 512-478-9958 214-328-1246 210-349-1553 801-465-2552 804-276-2332 262-857-9829 920-269-2133 920-233-2257
AUTHORIZED TOURING GUNSMITHS Pylinski Arms Wrights Inc. 967 Anderson Highway 4591 Shotgun Alley Cumberland Pinkneyville VA IL 804-492-4082 618-357-8933 804-492-3124 618-357-8921
Automatic-5 Shotgun Standard, Light and Magnum Models 12, 16 and 20 Gauge

auto-5

REF. no. part no. description sugg. retail
IMPORTANT: When ordering, list part number, part name, gun gauge/caliber and serial number. Please specify grade. Prices F.O.B. point of shipment subject to change without notice. Prices effective January 1, 2008. REF. no. part no. description sugg. retail

9 NS 25

B1111001 B1111003 B1111005 B1111007 B1111006 * B1111009 * * * * * * * B1111017 B1111022 B1111024 B1111015 B1111025 B1111027 B1111032
* B1111036 * B1111035 * B1111040 B1111042 B1111057 * B1111064 * B1111066 * B1111068 * B1111062 * B1111070 * B1111071 B1111076 B1111077 B1111079 B1111080 B1111081 B1111083 * B1111086 * B1111085 * B1111089 * B1111090 B1111092 B1111093 B1111094 * B1111103 * B1111107 * B1111111 * B1111115 * B1111117 B1111120 B1111098 * B1111121 * B1111127 * B1111134 * B1111136 * B1111142
ACTION SPRING ALL GAUGES ACTION SPRING FOLLOWER ALL GAUGES ACTION SPRING PLUG ALL GAUGES ACTION SPRING PLUG PIN ALL GAUGES ACTION SPRING PLUG PIN STALKER ACTION SPRING TUBE ALL GAUGES (UNTHREADED) BARREL EXTENSION ASSY 12 BARREL EXTENSION ASSY 16 BARREL EXTENSION ASSY 20 BARREL EXTENSION ASSY MAG 12 BARREL EXTENSION ASSY MAG 20 BREECH BLOCK 12-M-12 BREECH BLOCK 16 (FOR IN SHOP REPAIR ONLY) BREECH BLOCK 20 BREECH BLOCK MAG 20 BUTT PLATE ALL GAUGES BUTT PLATE SCREW ALL GAUGES BUTT STOCK SWIVEL EYELET ALL GAUGES CARRIER ASSEMBLY 2 PIECE 12 CARRIER ASSEMBLY 2 PIECE 16 CARRIER ASSEMBLY 2 PIECE 20-20M CARRIER ASSEMBLY MAG 12 CARRIER DOG 12M-12 CARRIER DOG 16-20-20M CARRIER DOG FOLLOWER 12M-12 CARRIER DOG FOLLOWER 16-20-20M CARRIER DOG PIN 12M-12 CARRIER DOG PIN 16-20-20M CARRIER DOG SPRING 12M-12 CARRIER DOG SPRING 16-20-20M CARRIER LATCH ASSEMBLY 12 CARRIER LATCH ASSEMBLY 12 MAGNUM CARRIER LATCH ASSEMBLY 16 CARRIER LATCH ASSEMBLY 20-20M CARRIER LATCH BUTTON 12 CARRIER LATCH BUTTON 12M-16 CARRIER LATCH BUTTON 20-20M CARRIER SCREW ALL GAUGES CARRIER SPRING (TRIGGER PLATE TYPE) 12M-12 CARRIER SPRING (TRIGGER PLATE TYPE) 16-20-20M CARTRIDGE STOP 12M-12 CARTRIDGE STOP 16-20-20M CARTRIDGE STOP SPRING ALL GAUGES CARTRIDGE STOP/CARRIER LATCH/ MAGAZINE CUT OFF PIN EJECTOR & EJECTOR ROD MAGNUM 20 EJECTOR 12 & PRE-WAR 16 EJECTOR 16-20 & 12M (REPLACES B1111125 MAG 12) EJECTOR RIVET 12 EJECTOR RIVET 12M-16-20
$2.50 $3.75 $2.00 $2.00 $2.00 $5.00 $110.00 $110.00 $110.00 $110.00 $110.00 $110.00 $110.00 $110.00 $110.00 $5.00 $2.50 $10.75 $86.00 $86.00 $86.00 $86.00 $12.25 $12.25 $2.25 $2.25 $2.25 $2.25 $1.75 $1.75 $12.50 $12.50 $12.50 $12.50 $3.50 $3.50 $3.50 $3.25 $3.25 $3.25 $12.00 $12.00 $1.75 $1.75 $13.25 $15.00 $15.00 $3.25 $3.25

30 NS NS 41A 41B 48

B1111124 B1111126 * B1111147 B1111155 * B1111150 B1111148 B1111164 * B1111149 B1111159 B1111163 B1111160 B1111162 * B1111165 * B1111167 B1111168 B1111169 * B1111172 * B1111170 * B1111183 * B1111191 * B1111192 * B1111175 * B1111176 B1111197 B1111199 B1111195 B1111198 B1111205 B1111207 B1111215 B1111216 * B1111228 * B1111225 * B1111232 B1111235 B1111237 B1111240 B1111247 B1111245 B1111251 B1111243 B1111252 B1111254 B1111280 * B1111256 * B1111261 B1111265 B1111264 B1111269 B1111272 B1111275 B1111277
EJECTOR SPRING MAGNUM 20 EJECTOR SPRING RETAINER MAGNUM 20 EXTRACTOR LEFT 12M-12-16-20 EXTRACTOR PIN LEFT & RIGHT ALL GAUGES EXTRACTOR RIGHT 12M-12-16-20 EXTRACTOR SPRING FOLLOWER MAG 20 EXTRACTOR SPRING FOLLOWER RIGHT 16-20 EXTRACTOR MAG 20 EXTRACTOR SPRING LEFT 12M-12-16-20 EXTRACTOR SPRING MAG 20 EXTRACTOR SPRING RIGHT 12M-12 EXTRACTOR SPRING RIGHT 16-20 FIRING PIN 12M-12 FIRING PIN 16-20-20M FIRING PIN STOP PIN 12M-12 FIRING PIN STOP PIN 16-20-20M FOREARM 5-SHOT 12 FOREARM 5-SHOT 12M FOREARM 5-SHOT 16 FOREARM 5-SHOT 20 FOREARM 5-SHOT 20M FOREARM 5-SHOT COMPOSITE 12 FOREARM 5-SHOT COMPOSITE 12M FRICTION PIECE BRONZE 12 FRICTION PIECE BRONZE 16-20 FRICTION PIECE BRONZE MAGNUM 12 FRICTION PIECE BRONZE MAGNUM 20 FRICTION RING 12M-12 FRICTION RING 16-20-20M FRICTION SPRING 12 FRICTION SPRING 16-20 HAMMER ASSY 12 HAMMER ASSY 12M HAMMER ASSY 16-20-20M HAMMER PIN ALL GAUGES HAMMER ROLLER HAMMER ROLLER PIN LINK 12 LINK 12M LINK 16-20 LINK 20M LINK PIN 12M-12 LINK PIN 16-20-20M LOCK SCREW ALL GAUGES LOCKING BLOCK 12M-12 LOCKING BLOCK 16-20-20M LOCKING BLOCK LATCH 12M LOCKING BLOCK LATCH 20M LOCKING BLOCK LATCH 2-PIECE CARRIER 12 LOCKING BLOCK LATCH 2-PIECE CARRIER 16-20 LOCKING BLOCK LATCH PIN ALL GAUGES LOCKING BLOCK LATCH SPRING 12M-12
$3.25 $3.25 $6.00 $2.50 $13.50 $2.25 $2.25 $15.25 $2.00 $2.00 $2.00 $2.00 $77.25 $77.25 $3.00 $3.00 $95.00 $125.00 $95.00 $95.00 $85.00 $75.00 $75.00 $6.00 $6.25 $7.50 $7.50 $3.25 $3.25 $2.50 $2.50 $18.75 $18.75 $20.25 $2.25 $2.50 $1.25 $15.00 $20.00 $20.00 $20.00 $2.50 $2.50 $3.00 $35.00 $40.00 $22.00 $20.00 $28.25 $19.50 $2.50 $1.25
*Indicates part must be fitted by Browning Service Department or qualified gunsmith. ***Factory replacement only. Firearm must be returned. ****These parts are no longer available. +Part may be purchased only by holders of a current, valid Federal Firearms License. NOTE: Unless otherwise indicated, part is interchangeable between gauges/calibers.
B1111279 B1111285 B1111287 B1111292 B1111294 B1111297 B1111295 B1111298 B1111299 B1111305 B1111310 B1111318

58 NS 62A NS 75 NS NS NS

B1793254 B1793830 B1793080 B1793245 B1793833 B1793082 B1793083 B1793220 B1793836 * B1793085 B1793086 * B1793676 * B1793665 B1793636 B1793674 B1793646 B1793667 B1793638 B1793645 B1793666 B1793611 B1793610 B1793609 B1793997 B1793614 B1793623 B1793608 B1793618 B1793625 B1793626 B1793616 B1793678 B1793612 B1793620 B1793218 B1793624 * * * * * B1793088 B1793089 B1793222 B1793248 B1793840 B1793842 B1793090 B1793845
MAINSPRING BT-99 ('06) MAINSPRING BT-99 MAX MAINSPRING GUIDE BT-100 MAINSPRING GUIDE BT-99 (01) MAINSPRING GUIDE BT-99 MAX MAINSPRING GUIDE RECEIVER BT-100 MAINSPRING GUIDE RECEIVER PIN BT-100 MAINSPRING SLEEVE BT-99 (01) MAINSPRING SLEEVE BT-99 MAX PUSH ROD BT-100 PUSH ROD RETAINING PIN BT-100 RECOIL PAD ASSEMBLY BT-99 & CITORI PLUS RECOIL PAD BT-99 & BT-100 RECOIL REDUCER ADJUSTING SCREW LOCK NUT RECOIL REDUCER ASSEMBLY BT-99 PLUS RECOIL REDUCER PAD PLATE BT-99 & CITORI PLUS RECOIL REDUCER PAD PLATE SCREW BT-99 & CITORI PLUS RECOIL REDUCER PAD PLATE SET SCREW BT-99 & CITORI PLUS RECOIL REDUCER STOCK PLATE BT-99 & CITORI PLUS RECOIL REDUCER STOCK PLATE SCREW BT-99 & CITORI PLUS RIB ASSEMBLY BT-99 MICRO PLUS 28" RIB ASSEMBLY CITORI 30" & BT-99 PLUS 32" RIB ASSEMBLY CITORI 32" & BT-99 PLUS 34" RIB BT-99 MICRO (04) 28" RIB ELEVATOR DETENT SPRING BT-99 & CITORI PLUS RIB ELEVATOR NUT BT-99 & CITORI PLUS RIB ELEVATOR SCREW BT-99 & CITORI PLUS RIB ELEVATOR SCREW PIN BT-99 & CITORI PLUS RIB ELEVATOR SPRING BT-99 & CITORI PLUS RIB ELEVATOR SPRING TYPE II (93) BT-99 & CITORI PLUS RIB ELEVATOR SPRING FOLLOWER BT-99 & CITORI PLUS RIB PIN PUNCH BT-99 & CITORI PLUS RIB PIVOT BT-99 & CITORI PLUS RIB PIVOT PIN FRONT BT-99 & CITORI PLUS RIB POST PIN BT-99 (01) RIB VIBRATION DAMPER BT-99 & CITORI PLUS SEAR ADJUSTING SCREW BT-100 SEAR BT-100 SEAR BT-99 (01) SEAR (06) SEAR BT-99 MAX SEAR PIN BT-99 MAX SEAR SPRING BT-100 SEAR SPRING BT-99 MAX
$3.50 $3.50 $6.75 $4.25 $5.25 $21.75 $1.00 $23.00 $6.25 $42.50 $1.25 $90.75 $23.50 $5.00 $141.25 $32.50 $1.00 $1.00 $20.50 $1.00 $220.00 $214.25 $214.25 $40.25 $1.50 $10.50 $3.75 $1.00 $14.00 $1.75 $1.50 $3.25 $7.25 $1.00 $1.00 $4.25 $1.25 $10.50 $32.25 $26.50 $15.00 $2.75 $2.50 $1.75

$909.00 $920.00 $810.00 $1,150.00 $1,700.00 $1,150.00 $688.00 $688.00 $745.00 $365.00 $2,400.00 $455.00 $7.25 $65.50 $54.25 $20.75 $50.00 $70.00 $111.25 $4.25 $4.75 $4.75 $2.75 $3.75 $10.25 $10.25 $0.00 $22.25 $45.25 $30.25 $2.25 $1.50 $1.50 $1.00 $2.75
126 NS NS 129 * * * * * * * * * * * * * * *
B1793912 B1334428 B1793915 B1793820 B1793221 B1793818 B1793819 B1793821 B1793140 B1793212 B1793142 B1793940 B1793941 B1793240 B1793942 B1793943 B1793695 B1793950 B1793953 B1793956 B1793144 B1793146 B1793959 B1793960 B1793148 B1793154 B1793150 B1793156 B1793162 B1793165 B1793160 B1793223 B1793962 B1793168 B1793210 B1793172 B1793975 B1334505 B1793241 B1793976 B1793977 B1793696 B1793174 B1793225 B1793985 B1793983 B1793984

* * * * * * * * * * * *

* B1793697 B1793965 * B1793178
TAKEDOWN LEVER SPRING BT-99 MAX, BT-100 TAKEDOWN LEVER SPRING SCREW BT-99 (01) & CITORI TAKEDOWN LEVER SPRING SCREW BT-99 MAX, BT-100 TANG PIECE BT-99 TANG PIECE BT-99 (01) TANG PIECE BT-99 MAX TANG PIECE BT-99 MAX STAINLESS TANG PIECE BT-99 PLUS STAINLESS TOP LEVER BT-100 BLUE TOP LEVER BT-100 SATIN TOP LEVER BT-100 STAINLESS TOP LEVER BT-99 TOP LEVER BT-99 (92) TOP LEVER BT-99 GOLDEN CLAYS (03) TOP LEVER BT-99 PLUS MAX TOP LEVER BT-99 PLUS MAX STAINLESS TOP LEVER BT-99 PLUS STAINLESS TOP LEVER DOG BT-99 TOP LEVER DOG SPRING BT-99 TOP LEVER DOG SPRING GUIDE BT-99 TOP LEVER RETAINER BT-100 TOP LEVER RETAINER SCREW BT-100 TOP LEVER SCREW BT-99 TOP LEVER SCREW BT-99 (92) TOP LEVER SPRING BT-100 TOP LEVER TRIP ACTIVATOR BT-100 TOP LEVER TRIP BT-100 TOP LEVER TRIP SPRING BT-100 TRIGGER BLOCK BT-100 TRIGGER BLOCK SPRING BT-100 TRIGGER BT-100 (SHOE) TRIGGER BT-99 (01) TRIGGER BT-99, BT-99 MAX TRIGGER GUARD BT-100 BLUE TRIGGER GUARD BT-100 SATIN TRIGGER GUARD BT-100 STAINLESS TRIGGER GUARD BT-99 TRIGGER GUARD BT-& MICRO TRIGGER GUARD BT-99 GOLDEN CLAYS 03 TRIGGER GUARD BT-99 MAX TRIGGER GUARD BT-99 MAX STAINLESS TRIGGER GUARD BT-99 PLUS STAINLESS TRIGGER GUARD PIN BT-100 TRIGGER GUARD PIN BT-99 (01) TRIGGER GUARD SCREW BT-100 TRIGGER GUARD SCREW BT-99 MAX BLUE TRIGGER GUARD SCREW BT-99 MAX STAINLESS TRIGGER GUARD SCREW BT-99 PLUS STAINLESS TRIGGER PIN BT-99 TRIGGER PLATE BT-100

BARREL PLUG UN-SINGLE BARREL WEIGHT ASSEMBLY W/ PIN RT XS PRO COMP BARREL WEIGHT ASSEMBLY W/ PLATE LT XS PRO COMP BARREL WEIGHT SCREW RT XS PRO COMP BUTT PLATE 12 GA BUTT PLATE 16-20-28-.410 BUTT PLATE SCREW COCKING LEVER 12 GA GOLDEN CLAYS COCKING LEVER 12 GA LIGHTNING GR 4 GRAY (05) COCKING LEVER 12 GA LIGHTNING GR 7 BLUED (05) COCKING LEVER 12 GA LIGHTNING GR 7 GRAY (05) COCKING LEVER 12 GA TYPE 1 (OBSOLETE) COCKING LEVER 12 GA TYPE 2 & 3 BLUED (96) COCKING LEVER 12 GA TYPE 2 & 3 (ROUGH) COCKING LEVER 12 GA XT TRAP GOLD (05) COCKING LEVER 12 GA 325, 425, 525 & 625 FIELD SILVER COCKING LEVER 12 GA 525 GOLDEN CLAYS COCKING LEVER 12 GA 525 SPORTING CLAYS COCKING LEVER 16 GA BLUED COCKING LEVER 20-28-.410 GOLDEN CLAYS COCKING LEVER 20-28-.410 LIGHTNING GR 4 GRAY COCKING LEVER 20-28-.410 LIGHTNING GR 7 BLUED COCKING LEVER 20-28-.410 LIGHTNING GR 7 GRAY COCKING LEVER 20-28-.410 COCKING LEVER 20-28-.410 (96) COCKING LEVER 20-28-.410 325, 425 & 525 FIELD SILVER COCKING LEVER 20-28-.GOLDEN CLAYS COCKING LEVER 20-28-.SPORTING CLAYS COCKING LEVER LIFTER 12 GA GOLDEN CLAYS COCKING LEVER LIFTER 12 GA LIGHTNING GR 4 GRAY (05) COCKING LEVER LIFTER 12 GA LIGHTNING GR 7 BLUED (05) COCKING LEVER LIFTER 12 GA LIGHTNING GR 7 GRAY (05) COCKING LEVER LIFTER 12 GA TYPE 1 COCKING LEVER LIFTER 12 GA TYPE 2 & 3 COCKING LEVER LIFTER 12 GA XT TRAP GOLD (05) COCKING LEVER LIFTER 12 GA 325 ULTRA COCKING LEVER LIFTER 12 GA 525 GOLDEN CLAY COCKING LEVER LIFTER 16-20-28-.410 COCKING LEVER LIFTER 20 GA 325 SILVER COCKING LEVER LIFTER 20-28-.410 GOLDEN CLAYS
$1.75 $162.25 $168.50 $14.25 $4.75 $4.75 $2.50 $150.50 $57.50 $149.50 $149.50 $47.75 $44.00 $35.25 $80.50 $40.25 $103.50 $69.00 $53.00 $151.75 $63.25 $155.25 $155.25 $47.75 $58.00 $40.25 $103.50 $69.00 $50.25 $31.25 $46.00 $46.00 $16.25 $17.75 $28.75 $23.00 $51.75 $17.75 $23.50 $50.50
5 NS NS NS NS NS 9 NS 10 NS NS NS NS NS 14 15
* B1337801 * B1337819 * B1337811 * B1337299 B1334060 B1334062 B1334061 B1334065 B1334064 B1334068 B1334069 B1334030 B1336030 B1337799 B1336031 B1336029 B1334031 B1336032 * B1334070 * B1334071 B1334074 B1793672 B1793651 B1793679 B1337142 B1793669 B1793677 * B1334108 * * * * B1334106 B1334107 B1334102 B1334103 B1334110
COCKING LEVER LIFTER 20-28-.410 LIGHTNING GR 4 GRAY COCKING LEVER LIFTER 20-28-.410 LIGHTNING GR 7 BLUED COCKING LEVER LIFTER 20-28-.410 LIGHTNING GR 7 GRAY COCKING LEVER LIFTER 20-28-.GOLDEN CLAY COCKING LEVER LIFTER PIN 12 GA TYPE 1 COCKING LEVER LIFTER PIN 12 GA TYPE 2 & 3 COCKING LEVER LIFTER PIN 16-20-28-.410 COCKING LEVER LIFTER SPRING 12 GA TYPE 1 COCKING LEVER LIFTER SPRING CURRENT COCKING LEVER LIFTER SPRING PLUNGER 12 GA ALL COCKING LEVER LIFTER SPRING PLUNGER 20-28-.410 COCKING LEVER PIN 12 GA TYPE 1 & 2 COCKING LEVER PIN 12 GA TYPE 3 COCKING LEVER PIN 16 GA TYPE 3 COCKING LEVER PIN 20-28-410 ALL TYPE 3 COCKING LEVER PIN 20-28-.410 SPRLIGHT COCKING LEVER PIN 20-28-.410 TYPE 2 COCKING LEVER PIN SET SCREW ALL GA TYPE 2 CONNECTOR 12 GA CONNECTOR 16-20-28-.410 CONNECTOR STOP PIN 12-20-28-.410 DROP STOP ADJUSTMENT SCREW CITORI & BT-99 PLUS DROP STOP ADJUSTMENT SET SCREW CITORI & BT-99 PLUS DROP STOP SCREW CITORI & BT-99 PLUS (94) DROP STOP SCREW CITORI SPORTING CLAYS & BT-100 DROP STOP SCREW LH CITORI & BT-99 PLUS DROP STOP SCREW RH CITORI & BT-99 PLUS EJECTOR EXTENSION COVER PLATE 12 GA COMBO TRAP ONLY EJECTOR EXTENSION LEFT 12 GA EJECTOR EXTENSION LEFT 16-20-28-.410 EJECTOR EXTENSION RIGHT 12 GA EJECTOR EXTENSION RIGHT 16-20-28-.410 EJECTOR EXTENSION SCREW 12-16-20-28-.410 EJECTOR HAMMER LEFT 12 GA 3.5" ONLY EJECTOR HAMMER LEFT 12 GA (EXCEPT SUPERLIGHT) EJECTOR HAMMER LEFT 12 GA GRAND PRIX EJECTOR HAMMER LEFT 12 GA SUPERLIGHT ONLY EJECTOR HAMMER LEFT 20-28-.410 SUPERLIGHT ONLY EJECTOR HAMMER LEFT 16-20-28-.410 (EXCEPT SUPERLIGHT) EJECTOR HAMMER PIN 12 GA (EXCEPT SUPERLIGHT)

$31.25 $51.75 $51.75 $51.75 $1.50 $1.75 $1.50 $2.75 $2.75 $3.50 $3.50 $3.25 $3.25 $3.25 $3.25 $3.25 $3.25 $1.75 $22.25 $22.25 $1.75 $1.00 $1.00 $5.75 $3.25 $7.50 $5.75 $12.00 $16.00 $14.75 $16.00 $14.75 $3.50 $10.50 $10.00 $14.00 $14.00 $14.00 $10.00 $2.75
* B1336606 * B1334124 * B1337796 * B1336124 * B1336125 * B1334125 B1334128
REF. no. part no. description sugg. retail REF. no. part no.
IMPORTANT: When ordering, list part number, part name, gun gauge/caliber and serial number. Please specify grade. Prices F.O.B. point of shipment subject to change without notice. Prices effective January 1, 2008. description sugg. retail

20 NS 27 * * * *

B1336128 B1334129 B1336129 * B1336605 * B1334120 * B1337797 * B1336120 * B1336121 * B1334121 B1334130 B1334132 B1334134 B1336134 B1334133 B1334135 B1337798 B1334114 B1334082 B1334081 B1334083 B1334084
EJECTOR HAMMER PIN 12 GA SUPERLIGHT ONLY EJECTOR HAMMER PIN 16-20-28-.410 (EXCEPT SUPERLIGHT) EJECTOR HAMMER PIN 20-28-.410 SUPERLIGHT ONLY EJECTOR HAMMER RIGHT 12 GA 3.5" ONLY EJECTOR HAMMER RIGHT 12 GA (EXCEPT SUPERLIGHT) EJECTOR HAMMER RIGHT 12 GA GRAND PRIX EJECTOR HAMMER RIGHT 12 GA SUPERLIGHT ONLY EJECTOR HAMMER RIGHT 20-28-.410 SUPERLIGHT ONLY EJECTOR HAMMER RIGHT 16-20-28-.410 (EXCEPT SUPERLIGHT) EJECTOR HAMMER SPRING 12-16-20-28-.410 EJECTOR HAMMER SPRING GUIDE 12-16-20-28-410 EJECTOR HAMMER SPRING RECEIVER 12 GA & 16 GA EJECTOR HAMMER SPRING RECEIVER 12 GA SUPERLIGHT ONLY EJECTOR HAMMER SPRING RECEIVER 20-28-.410 EJECTOR HAMMER SPRING RECEIVER SCREW 12-16-20-28-.410 EJECTOR HAMMER TOOL 12 GA GRAND PRIX EJECTOR RETAINING PIN (SCREW) 12-16-20-28-.410 EJECTOR RIGHT & LEFT 12 GA EJECTOR RIGHT & LEFT 16 GA EJECTOR RIGHT & LEFT 20 GA EJECTOR RIGHT & LEFT 20 GA SKEET SET 4 BARREL (OLD STYLE) EJECTOR RIGHT & LEFT 20 GAUGE SKEET SET 4 BARREL 06 EJECTOR RIGHT & LEFT 28 GA EJECTOR RIGHT & LEFT 28 GA SKEET SET 4 BARREL (OLD STYLE) EJECTOR RIGHT & LEFT 28 GAUGE SKEET SET 4 BARREL 06 EJECTOR RIGHT & LEFT.410 EJECTOR RIGHT & LEFT.410 Bore SKEET SET 4 BARREL (OLD STYLE) EJECTOR RIGHT & LEFT.410 Bore SKEET SET 4 BARREL 06 EJECTOR SEAR 12 GA EJECTOR SEAR 16-20-28-.410 EJECTOR SEAR PIN 12-16-20-28-.410 EJECTOR SEAR/COCKING LEVER LIFTER SPRING 12-16-20-28-.410 TYPE 2 & 3 ALL EJECTOR TRIP ROD LEFT 12 GA CURRENT EJECTOR TRIP ROD LEFT 12 GA TYPE 1 (OBSOLETE) EJECTOR TRIP ROD LEFT 20-28-.410 TYPE 1 (OBSOLETE) EJECTOR TRIP ROD LEFT 16-20-28-.410 TYPE 2 & 3 EJECTOR TRIP ROD RIGHT 12 GA CURRENT

SEAR RIGHT 28 GA &.410 TYPE 2 & 3 SEAR SPRING 12 GA SEAR SPRING 16-20 GA SEAR SPRING 28 GA-410 SELECTOR BALL SPRING TYPE 3 SELECTOR BALL TYPE 3 SELECTOR BLOCK TYPE 3 SELECTOR SAFETY FIELD 525 GRAY SELECTOR SAFETY LIGHTNING GR IV GRAY (05) SELECTOR SAFETY LIGHTNING GR VII BLUED (05) SELECTOR SAFETY LIGHTNING GR VII GRAY (05) SELECTOR SAFETY SPORTING & GOLDEN CLAYS SELECTOR SAFETY TYPE 3 SELECTOR SAFETY XT TRAP GOLD (05) SELECTOR SPRING 12-20-28-.410 SELECTOR SPRING DETENT PIN 12-20-28-.410 SELECTOR/TAKE DOWN LEVER SPRING SCREW 12-20-28-.410 SIGHT BEAD FRONT FIELD 12 ONLY SIGHT BEAD FRONT FIELD 16, 20, 28 &.410 SIGHT WHITE CENTER ALL SIGHT WHITE FRONT SPORTING CLAYS 12-20 SIGHT WHITE FRONT TARGET 12-20-28-.410 STOCK ADJUSTING SCREW BT-100 & CITORI SPORTING CLAYS STOCK ADJUSTMENT CLICK BALL STOCK ADJUSTMENT CLICK SPRING STOCK ADJUSTMENT DOVETAIL PLATE ASSEMBLY STOCK ADJUSTMENT HEIGHT PIN STOCK ADJUSTMENT HEIGHT PIN NUT STOCK ADJUSTMENT HEIGHT PIN SET PLATE STOCK ADJUSTMENT NUT CITORI & BT-99 PLUS STOCK ADJUSTMENT PLATE CITORI & BT-99 PLUS STOCK ADJUSTMENT PLATE CITORI SPORTER STOCK ADJUSTMENT PLATE SET SCREW CITORI & BT-99 PLUS STOCK ADJUSTMENT PLATE STUD CITORI & BT-99 PLUS STOCK ADJUSTMENT SCREW (WOOD PHILLIPS) STOCK ADJUSTMENT SERVO BOLT 12 GA EURO 177MM STOCK ADJUSTMENT SERVO BOLT AC 525 SPORT 12-20 /XS SPECIAL 147MM STOCK ADJUSTMENT SERVO BOLT AC PRO COMP 141MM STOCK ADJUSTMENT SERVO BOLT AC XS SKEET 12 GA, XT TRAP 177MM
$11.00 $2.75 $2.75 $2.75 $1.00 $1.00 $6.25 $20.25 $31.25 $51.75 $51.75 $51.75 $18.25 $32.25 $11.50 $2.50 $2.75 $4.25 $4.25 $3.50 $4.50 $4.50 $1.00 $1.00 $1.00 $59.00 $9.25 $1.00 $5.50 $1.00 $37.25 $18.25 $1.00 $3.50 $1.00 $15.75 $14.50 $13.75 $15.25

78B NS 80 NS 81 NS NS 83

* B1337259 B1337147 B1793653 B1336386 B1337762 B1334386 B1336387 B1337146 B1337215 B1337148 B1337149 B1337216 B1334390 B1337300 B1337822 B1334389 B1337207 B1337044 B1337228 B1337060 B133744G B133760G B1337594
* B1337785 * * * * * * * * * * * * * * * * * * * * * * * * * * B1337159 B1337059 B1337849 B1337242 B1337850 B1337851 B1337246 B1337244 B1337314 B1337756 B1337593 B1337308 B1337309 B1337310 B1337164 B1337752 B1337754 B1336342 B133642C B133642E B1337155 B1336472 B1337042 B1337037 B1337041 B1337852
STOCK ADJUSTMENT SERVO BOLT AC XS SKEET 20 GA 159MM STOCK ADJUSTMENT STUD CITORI SPORTER STOCK ADJUSTMENT STUD SCREW CITORI & BT-99 PLUS STOCK BOLT 12 GA SUPERLIGHT TYPE 3 STOCK BOLT 12 GA XS SPECIAL 192MM (04) STOCK BOLT 12-20-28-410 ALL STOCK BOLT 20 GA SUPERLIGHT TYPE 3 STOCK BOLT 20 GA 425 (230MM) STOCK BOLT ALLEN HEAD STOCK BOLT FOR ADJUSTABLE COMB (172MM) STOCK BOLT FOR ADJUSTABLE COMB (197MM) STOCK BOLT GUIDE STOCK BOLT LOCK WASHER ALL STOCK BOLT LOCK WASHER ALLEN HEAD STOCK BOLT WASHER AC TY 3-4 STOCK BOLT WASHER ALL STOCK BOLT WRENCH 5MM ALLEN STOCK 12 GA 325/425 STOCK 12 GA 425 ESPRIT STOCK 12 GA 425 GR I AC STOCK 12 GA 425 GOLDEN CLAYS STOCK 12 GA 425 GOLDEN CLAYS AC STOCK 12 GA 425 MILLERS" GOLD SPORTER STOCK 12 GA 425 MILLERS" GOLD SPORTER LH STOCK 12 GA 425 WSSF NATURAL STOCK 12 GA 425 WSSF PAINTED STOCK 12 GA 525 FEATHER (07) STOCK 12 GA 525 FIELD (02) STOCK 12 GA 525 FIELD GR III STOCK 12 GA 525 FIELD GR VI STOCK 12 GA 525 GOLDEN CLAYS (02) STOCK 12 GA 525 SPORTING CLAYS (02) STOCK 12 GA 525 SPORTING CLAYS AC STOCK 12 GA 525 SPORTING CLAY GR I (05) STOCK 12 GA 525 SPORTING CLAYS LH (04) STOCK 12 GA 625 FIELD STOCK 12 GA 625 SPORTING CLAYS STOCK 12 GA 625 SPORTING CLAYS AC STOCK 12 GA 802 ES STOCK 12 GA CLASSIC FEATHER LTNG GR1 STOCK 12 GA CLASSIC LIGHTNING GR1 STOCK 12 GA FIELD GR I SHORT TANG STOCK 12 GA FIELD GR III SHORT TANG STOCK 12 GA FIELD GR VI SHORT TANG STOCK 12 GA FIELD SATIN HUNTER GR I STOCK 12 GA GRAN LIGHTNING SHORT TANG STOCK 12 GA GTI & ULTRA GR I STOCK 12 GA GTI GOLDEN CLAYS STOCK 12 GA GTI SPORTING CLAYS PAINTED STOCK 12 GA GTS GR I

* B133765C * * * * * * * * * * * * B133645E B1336345 B1337854 B1337188 B1337167 B1337750 B1336346 B133646C B133646E B1337828 B1337843 B1336378
* B133678C * B133678E * * * * * * * B1337123 B1336382 B133682C B133682E B1337827 B1337842 B1337120
* B133723B * * * * * * * * * * * * * * * * * * * * * * * * * * B133742G B133763G B1337063 B1337201 B1337202 B1337182 B1337062 B1337165 B1337269 B1337855 B1337760 B1337595 B1337597 B1337591 B1337592 B1337758 B1337793 B1337792 B1336000 B1337277 B1336001 B1336354 B1337043 B1337061 B133743G B133761G
STOCK 12 GA SPECIAL TRAP GR III M/C SHORT TANG (95) & ULTRA XT STOCK 12 GA SPORTER GR VI TYPE 3 STOCK 12 GA SPORTER/UPLAND GR I TYPE 3 STOCK 12 GA SPORTING GRAND PRIX (07) STOCK 12 GA SPORTING HUNTER 3" STOCK 12 GA SPORTING HUNTER 3.5" STOCK 12 GA SUPER LIGHTNING GR I STOCK 12 GA SUPERLIGHT GR I TYPE 3 STOCK 12 GA SUPERLIGHT GR III TYPE 3 STOCK 12 GA SUPERLIGHT GR VI TYPE 3 STOCK 12 GA TRAP A/C UNSINGLE STOCK 12 GA TRAP A/C UNSINGLE GC STOCK 12 GA TRAP CONVENTIONAL GR I SHORT TANG STOCK 12 GA TRAP CONVENTIONAL GR III SHORT TANG STOCK 12 GA TRAP CONVENTIONAL GR VI SHORT TANG STOCK 12 GA TRAP GR I PLUS SHORT TANG STOCK 12 GA TRAP M/C GR I SHORT TANG STOCK 12 GA TRAP M/C GR III SHORT TANG STOCK 12 GA TRAP M/C GR VI SHORT TANG STOCK 12 GA TRAP M/C UNSINGLE STOCK 12 GA TRAP M/C UNSINGLE GC STOCK 12 GA TRAP PAINTED SHORT TANG W/ RECOIL REDUCER STOCK 12 GA TRAP PIGEON PLUS SHORT TANG STOCK 12 GA ULTRA GOLDEN CLAYS STOCK 12 GA ULTRA GOLDEN CLAYS AC STOCK 12 GA ULTRA SPORTER AC STOCK 12 GA ULTRA XS SKEET STOCK 12 GA ULTRA XS SKEET AC STOCK 12 GA ULTRA XS SPORTING STOCK 12 GA ULTRA XT AC STOCK 12 GA WHITE LIGHTNING STOCK 12 GA XS PRO COMP (LESS RECOIL PAD & RECOIL REDUCER SYSTEM) STOCK 12 GA XS SPECIAL HIGH POST RIB STOCK 12 GA XS SPECIAL LOW POST RIB STOCK 12 GA XT MILLERS GOLD AC STOCK 12 GA XT MILLERS GOLD M/C STOCK 12 GA XT TRAP (03) STOCK 12 GA XT TRAP AC (03) STOCK 12 GA XT TRAP GOLD AC (05) STOCK 16 GA 525 FIELD (06) STOCK 16 GA 525 SPORTING CLAYS (06) STOCK 16 GA GRAN LIGHTNING (02) STOCK 16 GA LIGHTNING SHORT TANG STOCK 16 GA SUPERLIGHT (02) STOCK 16 GA UPLAND GR I TYPE 3 STOCK 20 GA 325/425 STOCK 20 GA 425 GR I AC STOCK 20 GA 425 GOLDEN CLAYS STOCK 20 GA 425 GOLDEN CLAYS AC
$554.50 $759.75 $310.50 $632.50 $286.75 $299.00 $385.25 $309.75 $576.00 $759.75 $876.50 $977.50 $370.50 $480.50 $793.25 $944.50 $370.50 $480.50 $793.25 $534.75 $862.50 $1,033.75 $1,200.75 $802.00 $1,053.50 $781.00 $589.75 $814.00 $514.25 $986.75 $244.75 $644.50 $747.50 $718.75 $937.25 $690.00 $685.75 $920.00 $1,069.50 $373.75 $460.00 $704.00 $319.00 $640.75 $381.00 $575.50 $738.75 $802.00 $1,074.00

BOLT SHROUD M-1000 ECLIPSE WSM BOLT SHROUD M-1000 ECLIPSE WSM STAINLESS BOLT SHROUD MEDALLION BOLT SHROUD STAINLESS STALKER BOLT SHROUD WHITE GOLD MEDALLION BOLT SLEEVE.22 HORNET MICRO HUNTER (93) BOLT SLEEVE.22 HORNET MICRO HUNTER LH (03) BOLT SLEEVE.223 REM MICRO HUNTER LH (03) BOLT SLEEVE.223 REM MICRO MEDALLION (93) BOLT SLEEVE.223 REM SSA (04) BOLT SLEEVE L/A (93) BOLT SLEEVE L/A LH (93) BOLT SLEEVE S/A (93) BOLT SLEEVE S/A LH (93) BOLT SLEEVE S/A MICRO HUNTER LH BOLT SLEEVE WSM BOLT SLEEVE WSM LH BOLT SLEEVE WSM MICRO HUNTER LH (03) BOLT SLEEVE WSM MOUNTAIN Ti BOLT SLEEVE WSSM (03) BOLT SLEEVE WSSM MOUNTAIN Ti BOLT SLEEVE WSSM HUNTER LH BOLT SLEEVE WSSM MEDALLION LH BOLT SLEEVE INSERT MOUNTAIN Ti WSM BOLT SLEEVE PIN WSSM MOUNTAIN Ti BUTT PLATE BUTT PLATE SCREW EJECTOR EJECTOR.22 HORNET MICRO (93) EJECTOR.22 HORNET MICRO LH (93) EJECTOR.223 REM EJECTOR WSSM (03) EJECTOR PIN EJECTOR SPRING EJECTOR SPRING.22 HORNET (93) EXTRACTOR.22 HORNET (93) EXTRACTOR.223 REM EXTRACTOR EXTRACTOR PIN.22 HORNET (93) EXTRACTOR SPRING.22 HORNET (93) EXTRACTOR SPRING.223 REM EXTRACTOR SPRING MAG (98) EXTRACTOR SPRING STD CALIBERS L/A & S/A (98) EXTRACTOR SPRING SCREW 22 HORNET (93) FEED RAMP.22 HORNET FEED RAMP PIN.22 HORNET FEED RAMP SPRING.22 HORNET FIRING PIN L/A (PRE 93) FIRING PIN L/A II (93) FIRING PIN S/A (PRE 93)
$27.75 $37.50 $22.25 $22.25 $22.50 $53.25 $72.50 $70.00 $46.00 $69.00 $45.00 $45.00 $43.00 $49.00 $59.00 $63.25 $63.25 $67.50 $103.50 $72.50 $50.50 $59.00 $57.50 $0.00 $1.25 $4.50 $2.50 $2.25 $2.75 $4.25 $2.50 $3.50 $2.25 $2.25 $1.00 $8.00 $13.75 $11.50 $1.00 $1.25 $1.75 $1.75 $1.75 $2.75 $2.25 $1.00 $1.25 $14.50 $19.00 $16.00
25 NS NS NS NS NS NS NS NS NS NS 29
* B3578460 * B357804003 B3578622 B3578626 B3578461 B3578625 B3578462 B357804103 B3578629 B3578922 B3578593 B3578591 B3578592 B3578A91 B3578988 B3578A41 B3578989 B3578940 B3578948 B3578949 B357806204 B357806104 B357806304 B3578960 B3578716 B3578715 B3578721 B3578030 B3578717 B3578720 B357804803 B3578722 B3578050 B357803004 B357801604 B3578052 B3578051 B357803804 B357804403 B357804303 B357805704 B357804503
FIRING PIN S/A (93) FIRING PIN WSSM (03) FIRING PIN SEAR PIN FIRING PIN SPRING L/A (PRE 93) FIRING PIN SPRING L/A (93) FIRING PIN SPRING S/A (PRE 93) FIRING PIN SPRING S/A (93) FIRING PIN SPRING WSSM (03) FIRING PIN WASHER FRICTION SPRING.22 HORNET GAS STOP ASSEMBLY 223 REM (PRE 93) GAS STOP ASSEMBLY L/A (PRE 93) GAS STOP ASSEMBLY S/A (PRE 93) GAS STOP ASSEMBLY STAINLESS STALKER (PRE 93) GRIP CAP CUSTOM TROPHY GRIP CAP SCREW COMPOSITE STOCK GRIP CAP SCREW CUSTOM TROPHY MAGAZINE BLOCK PIN 22 HORNET MAGAZINE CLIP 22 HORNET MAGAZINE FLOORPLATE.22 HORNET MAGAZINE FLOORPLATE.223 REM SSA HUNTER MAGAZINE FLOORPLATE.223 REM SSA MEDALLION MAGAZINE FLOORPLATE.223 REM SSA STAINLESS STALKER MAGAZINE FLOOR PLATE CUSTOM TROPHY MAGAZINE FLOORPLATE L/A HUNTER 01) MAGAZINE FLOORPLATE L/A MEDALLION (90) MAGAZINE FLOORPLATE L/A STAINLESS STALKER (90) MAGAZINE FLOOR PLATE L/A WHITE GOLD MEDALLION MAGAZINE FLOORPLATE S/A HUNTER(90) MAGAZINE FLOOR PLATE S/A MEDALLION (90) MAGAZINE FLOORPLATE S/A MICRO HUNTER MAGAZINE FLOORPLATE S/A STAINLESS STALKER (95) MAGAZINE FLOOR PLATE WSM HUNTER (01) MAGAZINE FLOORPLATE WSM M-1000 ECLIPSE MAGAZINE FLOORPLATE WSM M-1000 ECLIPSE STAINLESS MAGAZINE FLOOR PLATE WSM MEDALLION MAGAZINE FLOORPLATE WSM STAINLESS MAGAZINE FLOOR PLATE WSM WHITE GOLD MEDALLION MAGAZINE FLOORPLATE WSSM HUNTER (03) MAGAZINE FLOORPLATE WSSM MEDALLION (03) MAGAZINE FLOORPLATE WSSM STAINLESS VARMINT LAMINATE MAGAZINE FLOORPLATE WSSM STAINLESS (03)

$19.00 $23.75 $2.00 $2.00 $2.00 $2.00 $2.00 $2.50 $1.50 $1.00 $12.75 $12.75 $12.75 $16.00 $21.00 $2.50 $3.00 $1.25 $3.75 $28.75 $28.75 $28.75 $28.75 $28.75 $23.00 $25.00 $23.00 $28.00 $23.00 $25.00 $23.00 $23.00 $21.00 $25.00 $25.00 $25.00 $25.00 $27.75 $25.75 $30.50 $34.50 $28.00

42A 56 56A 62

B357806603 B357803605 B3578714 B3578712 B3578713 B3578A12 B3578035 B3578215 B3578218 B3578222 B3578A22 B3578037 B357803404 B357802004 B3578227 B3578229 B3578233 B3578235 B3578234 * B3578739 * B3578738 * B357803104 * B357801704 * B3578A38 * B3578031 * B3578876 * B3578A76 B3578249 B3578248 B3578252 B3578358 * B3578240 B3578765 * B3578770 B3578771 B3578773 * B3578255 B3578756 B3578258 B3578261 * B3578766 * B3578764
MAGAZINE FLOORPLATE WSSM WHITE GOLD MEDALLION (03) MAGAZINE FLOORPLATE HINGE ECLIPSE STAINLESS MAGAZINE FLOORPLATE HINGE HUNTER MAGAZINE FLOOR PLATE HINGE MEDALLION MAGAZINE FLOOR PLATE HINGE S/A HUNTER PRE-1995 (COMPOSITE) MAGAZINE FLOORPLATE HINGE STAINLESS STALKER MAGAZINE FLOOR PLATE HINGE WHITE GOLD MEDALLION MAGAZINE FLOORPLATE HINGE PIN MAGAZINE FLOORPLATE HINGE SPRING MAGAZINE FLOORPLATE LATCH HUNTER MAGAZINE FLOORPLATE LATCH STAINLESS STALKER MAGAZINE FLOORPLATE LATCH WHITE GOLD MEDALLION MAGAZINE FLOORPLATE LATCH M-1000 ECLIPSE WSM MAGAZINE FLOORPLATE LATCH M-1000 ECLIPSE WSM STAINLESS MAGAZINE FLOORPLATE LATCH PIN MAGAZINE FLOORPLATE LATCH SPRING MAGAZINE RETAINER SPRING EXCEPT MICRO MAGAZINE RETAINER SPRING MICRO ONLY MAGAZINE RETAINER SPRING PIN MECHANISM HOUSING HUNTER MECHANISM HOUSING MEDALLION MECHANISM HOUSING M-1000 ECLIPSE WSM MECHANISM HOUSING M-1000 ECLIPSE WSM STAINLESS MECHANISM HOUSING STAINLESS STALKER MECHANISM HOUSING WHITE GOLD MEDALLION MECHANISM HOUSING ASSEMBLY HUNTER MECHANISM HOUSING ASSEMBLY STAINLESS STALKER MECHANISM HOUSING SCREW (96) MECHANISM HOUSING SCREW (PRE 96) MECHANISM HOUSING SCREW WASHER & SAFETY BLOCK WASHER MECHANISM HOUSING SET PIN & TRIGGER SIDE PLATE SET PIN SAFETY SAFETY BLOCKING PIN SAFETY LEVER SAFETY LEVER PIN SAFETY LEVER SPRING SAFETY LINK SAFETY LINK ROLL PIN SAFETY PIN SAFETY PIN SNAP RING SAFETY SELECTOR HUNTER SAFETY SELECTOR MEDALLION
$33.50 $19.75 $9.50 $9.50 $5.50 $12.25 $15.25 $2.25 $2.25 $15.00 $18.00 $6.50 $4.75 $9.50 $2.25 $2.25 $2.25 $2.25 $2.25 $28.00 $28.50 $32.50 $34.50 $31.75 $24.75 $120.00 $200.00 $4.25 $2.75 $3.00 $1.75 $9.50 $2.50 $8.25 $2.50 $3.00 $4.25 $2.50 $2.25 $1.25 $8.00 $8.00
67 NS NS NS NS NS NS NS 70

RECEIVER INSERT (FOR SCOPE MT SCREW) RECEIVER MAG CAL BPR RECEIVER STD CAL BPR RECOIL PAD A-500 BAR LWT & BPR RECOIL PAD SCREW BAR LWT & BPR RUBBER BALL FOREARM GUIDE BPR SAFETY O-RING BAR II LWT & BPR SAFETY REVERSIBLE WITH O-RING BAR II LWT & BPR SAFETY SPRING BAR II LWT & BPR SAFETY SPRING PLUNGER BAR II LWT & BPR SAFETY SPRING RETAINING PIN BAR II LWT & BPR SEAR BAR II LWT & BPR SEAR PIN/TRIGGER PIN BAR II LWT & BPR SIGHT ASSEMBLY REAR MAGNUM BAR II & LWT & BPR SIGHT ASSEMBLY REAR STANDARD BAR II & LWT & BPR SIGHT GOLD BEAD FRONT 327 BAR II LWT & BPR SIGHT GOLD BEAD FRONT 358 BAR II LWT & BPR SIGHT GOLD BEAD FRONT 390 BAR II LWT & BPR SIGHT HOOD BAR II LWT & BPR SIGHT RAMP FRONT BAR II LWT & BPR SIGHT RAMP SCREW MT SCREW LONG (94) SIGHT RAMP SCREW FRONT & REAR SIGHT MT SCREW MEDIUM (94) SLIDE BAR LEFT BPR SLIDE BAR RIGHT BPR SLIDE BPR SLIDE BUFFER BPR SLIDE GUIDE BPR SLIDE STOP SLIDE STOP LEVER BPR SLIDE STOP WASHER BPR SLING EYELET REAR BAR ALL & BPR STOCK W/ PAD BAR LWT & BPR STOCK BOLT BAR II LWT & BPR STOCK BOLT LOCK WASHER BAR II LWT STOCK BOLT WASHER BAR II LWT & BPR TELESCOPE MOUNT FILLER SCREWS BAR ALL & BPR TIMING LATCH BAR LWT & BPR TIMING LATCH NEW STYLE (00) TIMING LATCH RETAINING PIN BAR ALL & BPR TRIGGER BAR II LWT & BPR TRIGGER GUARD BPR TRIGGER GUARD BUFFER BAR II LWT & BPR TRIGGER GUARD RETAINING PIN (2) BAR II LWT & BPR TRIGGER GUARD RETAINING PIN SPRING BAR II LWT & BPR
$1.25 $323.00 $323.00 $11.00 $1.25 $1.25 $2.50 $3.75 $1.25 $1.25 $1.25 $6.00 $1.25 $33.75 $33.75 $10.00 $10.00 $10.00 $5.00 $13.25 $1.25 $1.25 $7.25 $7.25 $37.25 $1.25 $14.50 $6.00 $9.75 $3.75 $2.50 $146.50 $2.50 $1.25 $2.50 $1.25 $3.75 $18.00 $1.25 $12.00 $35.00 $1.25 $2.50 $1.25

See note above 37 38

Single Shot High and Low Wall Rifles, BPCR Rifle

model 1885

*+ *+ *+ *+ *+ *+ *+ *+ *+ *+ *+ *+ *+ *+ *+ *+ *+ *+ *+ *+ *+ * * * * * *
B3474950 B3474702 B3474703 B3474952 B3474954 B3474610 B3474712 B3474616 B3474708 B3474614 B3474618 B3474613 B3474612 B3474611 B3474607 B3474727 B3474620 B3474615 B3474723 B3474951 B3474953 B3474730 B3474958 B2464520 B3474944 B3474734 B3474624 B2464524 B3474733 B2166925 B3474628 B3474742 B3474744 B3474746 B3474750 B3474753 B3474756 B3474757 B3474759 B3474761 B3474763 B3474765 B3474767 B3474962 B3474769 B3474964 B3474966 B3474768 B3474636 B3474942 B3474943 B3474775 B3474773

$18.50 $21.00 $11.50 $1.00 $1.00 $1.75 $1.75 $20.00 $1.25 $100.00 $120.00 $1.75 $3.25 $12.25 $1.75 $2.25 $2.25 $7.00 $2.25 $1.75 $2.25 $1.00 $177.00 $275.00 $453.25 $7.00 $1.75 $87.25 $2.25 $1.75 $24.00 $24.00 $76.50
22 Caliber Bolt-Action Rifle 2006 to Current

T-Bolt

3 NS NS 6A 6B NS 9 9A 12 12A 21 22

*+ *+ *+ * * * *

B2569012 B2569024 B2569001 B2569000 B2569059 B2569058 B2569023 B2569044 B2569020 B2569014 B2569018 B2464520 B2464524 B2569002 B2569019 B2569041 B2569045 B2569047 B2569046 B2569048 B2569021 B2569049 B2569005 B2569007 B2569008 B2569011 B2569009 B2569010 B2569003 B2569006 B2569043 B2569017
BBL MOUNTING SCREW (3X) BBL MOUNTING STAR WASHER (2X) BBL/REC.17 HMR SPORTER BBL/REC.22 LR BBL/REC.22 LR VARMINT/TARGET BOLT ASSY CURRENT BOLT ASSY OLD STYLE (OBSOLETE) BOLT BODY CURRENT BOLT BODY OLD STYLE (OBSOLETE) BOLT HANDLE BOLT PIN BUTT PLATE BUTT PLATE SCREW COVER END CROSS BOLT EXTRACTOR (OBSOLETE) EXTRACTOR LEFT CURRENT EXTRACTOR PIN (2X) EXTRACTOR RIGHT CURRENT EXTRACTOR SPRING FIRING PIN FIRING PIN RETAINING BAND GEAR (2X) MAGAZINE EJECT SPRING MAGAZINE FRAME MAGAZINE FRAME PIN MAGAZINE FRAME SPRING MAGAZINE LATCH MAGAZINE SCREW MAGAZINE SPRING MAGAZINE STOP MAINSPRING
$7.00 $7.00 $517.50 $517.50 $517.50 $322.00 $69.00 $138.00 $86.25 $27.75 $3.50 $8.25 $1.50 $17.25 $10.50 $17.25 $5.75 $3.00 $5.75 $3.00 $17.25 $3.00 $10.50 $3.50 $14.00 $3.50 $3.50 $10.50 $3.50 $3.50 $17.25 $3.50

25 NS 40A 43 NS NS 44 45

*+ * * * *+ * *
B2569056 B2569057 B2569015 B2569016 B2569026 B2569004 B2569034 B2569033 B2569039 B2569027 B2569025 B2569038 B2569036 B2569037 B3578295 B3578296 B2569042 B2569060 B2569050 B2569051 B2569052 B2569053 B2569054 B2569055 B3578814 B2569035 B2569028 B2569029 B2569031 B2569040 B2569030 B2569032
MAINSPRING PLUNGER FRONT MAINSPRING PLUNGER REAR MAINSPRING SPRING BALL MAINSPRING SPRING PLUNGER (2X) RECEIVER PIN S MAG SAFETY BLOCK SAFETY LINK SAFETY, SEAR, TRIGGER & SEAR BAR PIN SAFETY SELECTOR SAFETY SPRING SEAR SEAR BAR SEAR SPRING SLING EYELET FRONT SLING EYELET REAR STOCK HUNTER STOCK VARMINT/TARGET STOCK PLATE FRONT 1.3MM STOCK PLATE FRONT 1.6MM STOCK PLATE FRONT 1.9MM STOCK PLATE REAR 1.3MM STOCK PLATE REAR 1.6MM STOCK PLATE REAR 1.9MM TELESCOPE MOUNT FILLER SCREWS TRIGGER TRIGGER HOUSING TRIGGER HOUSING COVER TRIGGER HOUSING INSERT TRIGGER MECHANISM ASSY TRIGGER SCREW TRIGGER SPRING
$3.50 $3.50 $3.50 $3.50 $3.50 $3.50 $7.00 $7.00 $7.00 $10.50 $3.50 $27.75 $14.00 $7.00 $11.50 $2.75 $172.50 $391.00 $2.50 $2.50 $2.50 $2.50 $2.50 $2.50 $1.50 $34.50 $31.25 $10.50 $10.50 $138.00 $10.50 $3.50

12 12A

24 40A

38 40A

14 6A 3