BDA 380

PISTOL OWNERS MANUAL
THANK YOU FOR CHOOSING A BROWNING BDA 380 PISTOL
The Browning BDA 380 is another in a long line of dependable, high-quality Browning centerfire pistols you will be proud to own. The BDA 380 autoloading pistol uses a dependable, blowback action design with a removable magazine. John M. Browning invented his first autoloading pistol in 1894. BDA 380 pistols incorporate features that reflect the significant improvements and original ideas he contributed during more than 25 years of designing pistols. Since then, we have produced a variety of models designed for sportsmen, competitive target shooters, law enforcement and personal defense. In every sense, the BDA 380 pistol is a true Browning, giving you the kind of shooting enjoyment and dependability youve come to expect from the worlds most respected gun company. With a reasonable amount of care, your BDA 380 pistol should give you many years of dependable, enjoyable service. Please feel free to contact us immediately if you have any observations regarding its performance and operation.
YOU ARE RESPONSIBLE FOR FIREARMS SAFETY
As a gun owner, you accept a set of demanding responsibilities. How seriously you take these responsibilities can be the difference between life and death.
THERE IS NO EXCUSE FOR CARELESS OR ABUSIVE HANDLING OF ANY FIREARM. AT ALL TIMES HANDLE YOUR BDA 380 AND ANY OTHER FIREARM WITH INTENSE RESPECT FOR ITS POWER AND POTENTIAL DANGER. PLEASE READ AND UNDERSTAND THE CAUTIONS AND PROPER HANDLING PROCEDURES OUTLINED IN THIS OWNERS MANUAL BEFORE USING YOUR NEW FIREARM.
1 ALWAYS KEEP THE MUZZLE OF YOUR BDA 380 POINTED IN A SAFE DIRECTION. Never point any firearm at anything you do not intend to shoot. Be extremely alert and aware of all persons and property within the range of your ammunition. 2 NEVER RELY TOTALLY ON YOUR FIREARMS MECHANICAL SAFETY DEVICE. The word safety describes a guns blocking or disengaging mechanism for the trigger, sear, hammer and/or firing pin. Although mechanical devices place your BDA 380 pistol in a SAFER status, no guarantee can be made that the gun will not fire even if the safety is in the on safe position.
LIKE ANY MECHANICAL DEVICE, A SAFETY CAN SOMETIMES FAIL; IT CAN BE JARRED OR INADVERTENTLY MANIPULATED INTO AN UNSAFE CONDITION. Mechanical safeties merely aid safe gun handling and are no excuse for pointing your guns muzzle in an unsafe direction. While it is a good idea to test your guns mechanical safeties periodically for proper function, NEVER TEST IT WHILE YOUR GUN IS LOADED OR POINTED IN AN UNSAFE DIRECTION.
Safe gun handling does not stop with your guns mechanical safety devices it starts there. Always treat this pistol with the respect due a loaded, ready-to-fire firearm. 3 DO NOT CARRY YOUR BDA 380 WITH A ROUND IN THE CHAMBER. For good safety practice, it is recommended that a round not be chambered until immediately before your pistol is to be fired.
4 THE RECOMMENDED CARRYING POSITION OF THE BDA 380 IS WITH THE HAMMER IN THE DECOCKED POSITION. Carefully follow the procedures for lowering the hammer from the cocked to the decocked position explained on page 10 in this owners manual. 5 WHENEVER YOU HANDLE YOUR BDA 380, OR HAND IT TO SOMEONE, MAKE SURE IT IS COMPLETELY UNLOADED. To fully unload your BDA 380, you must first remove the magazine, open and lock the slide rearward, and visually inspect the chamber to be certain it does not contain a cartridge. It is vital that you remove the magazine from your pistol so a cartridge is not automatically chambered when you close the action. Always keep the chamber empty and the safety in the on safe position unless shooting is imminent. See page 18 for unloading procedures. 6 DO NOT TRANSPORT YOUR BDA 380 LOADED. Keep it unloaded, whether stored in a holster, gun case or other container. 7 HUNTING FROM ELEVATED SURFACES SUCH AS TREE STANDS IS DANGEROUS, and may increase the risk of handling a firearm. The following rules should always be observed by you and those you hunt with: Always make certain that the stand being used is safe and stable. Always make certain that your firearm is unloaded when it is being taken up and down from the stand. Always make certain that your firearm is not dropped from the stand, or dropped while it is being taken up or down from the stand. Remember, a loaded firearm may discharge when dropped, even with the safety in the on safe position. 8 BEWARE OF BARREL OBSTRUCTIONS. When preparing to shoot your pistol, check for a barrel obstruction as follows: First, fully unload the pistol by removing the magazine, locking the action open and inspecting the chamber.

BE CERTAIN NO LIVE ROUND IS IN THE CHAMBER. Glance down the barrel to be sure it is clear of any obstruction. It takes only one small obstruction to dangerously increase pressures. Before the first firing, clean the bore with a cleaning rod and patch, and wipe away any anti-rust compounds in the chamber and around the action.
BE ALERT TO THE SIGNS OF AMMUNITION MALFUNCTION. If you detect an off sound or light recoil when a cartridge is fired, do not load another cartridge into the chamber. Fully unload by removing the magazine and removing the cartridge from the chamber. With the action open, glance down the barrel to make sure that an obstruction does not remain in the barrel. If there is an obstruction, completely clear the barrel before loading and firing again. Failure to follow these instructions can cause extensive damage to your gun and possible serious injury to yourself and others.
9 BE CERTAIN YOUR PISTOL IS UNLOADED BEFORE CLEANING. Because so many gun accidents occur when a firearm is being cleaned, special and extreme care should be taken to be sure your gun is unloaded before disassembly, cleaning and reassembly. Keep ammunition away from the cleaning location. Never test the mechanical function of any firearm with live ammunition. 10 ALWAYS UNLOAD YOUR PISTOL WHEN NOT IN USE. Your responsibilities do not end when your firearm is unattended. Store your pistol and ammunition separately and well beyond the reach of children. Take all safeguards to ensure your pistol does not become available to untrained, inexperienced or unwelcome hands. 11 USE THE PROPER AMMUNITION. The barrel and action of this pistol have been made with substantial safety margins over the pressures developed by established American commercial loads. HOWEVER, WE ASSUME NO LIABILITY FOR ACCIDENTS WHICH OCCUR THROUGH THE USE OF CARTRIDGES OF NON-STANDARD DIMENSIONS OR THAT DEVELOP PRESSURES IN EXCESS OF COMMERCIALLY AVAILABLE AMMUNITION THAT HAS BEEN LOADED IN ACCORDANCE WITH STANDARDS ESTABLISHED BY THE SPORTING ARMS AND AMMUNITION MANUFACTURERS INSTITUTE (SAAMI). EXAMINE EVERY CARTRIDGE YOU PUT IN YOUR BDA 380 PISTOL. The BDA 380 pistol is designed and chambered for.380 ACP cartridges only. We cannot assume any responsibility for the use of unsafe or improper arms and ammunition combinations. It is your responsibility to read and heed all warnings in this owners manual and on ammunition boxes.

12 DISCHARGING FIREARMS IN POORLY VENTILATED AREAS, CLEANING FIREARMS OR HANDLING AMMUNITION MAY RESULT IN EXPOSURE TO LEAD AND OTHER SUBSTANCES KNOWN TO CAUSE BIRTH DEFECTS, REPRODUCTIVE HARM AND OTHER SERIOUS PHYSICAL INJURY. HAVE ADEQUATE VENTILATION AT ALL TIMES; WASH HANDS THOROUGHLY AFTER EXPOSURE. 13 DO NOT SNAP THE FIRING PIN ON AN EMPTY CHAMBER THE CHAMBER MAY NOT BE EMPTY! Treat every gun with the respect due a loaded gun, even if you are certain the gun is unloaded. 14 KEEP YOUR FINGER AWAY FROM THE TRIGGER WHILE UNLOADING AND LOADING UNTIL YOU ARE READY TO SHOOT. 15 BE SURE OF YOUR TARGET AND BACKSTOP. Take additional care during low light periods. Know the range of your ammunition. Never shoot at water or hard objects. 16 DROPPING YOUR BDA 380 WHEN LOADED CAN CAUSE AN ACCIDENTAL DISCHARGE EVEN WITH THE SAFETY ON. Be extremely careful while hunting or during any shooting activity, to avoid dropping a loaded firearm. 17 ALWAYS COMPLETELY UNLOAD YOUR PISTOLS CHAMBER BEFORE CROSSING A FENCE, CLIMBING A TREE, JUMPING A DITCH OR NEGOTIATING OTHER OBSTACLES. Never place your BDA 380 on a car, or on any unstable object. 18 IF YOUR BDA 380 FAILS TO FIRE, KEEP THE MUZZLE POINTED IN A SAFE DIRECTION. Hold this position for a minimum of 30 seconds. Carefully open the action and remove the cartridge. If the primer is indented, the cartridge should be disposed of in a way that cannot cause harm. If the primer is not indented, your firearm should be examined by a qualified gunsmith and the cause of the malfunction should be corrected before further use. 19 WEAR EYE AND EAR PROTECTION WHEN SHOOTING. Unprotected, repeated exposure to gunfire can cause hearing damage. Wear hearing protectors (shooting ear plugs or muffs) to guard against
such damage. Wear shooting glasses to protect your eyes from flying particles. Always keep a safe distance between the muzzle of your firearm and any persons nearby, as muzzle blast, debris and ejecting shells could inflict serious injury. Also, wear eye protection when disassembling and cleaning your pistol to prevent the possibility of springs, spring-tensioned parts, solvents or other agents from contacting your eyes. 20 BE DEFENSIVE AND ON GUARD AGAINST UNSAFE GUN HANDLING AROUND YOU AND OTHERS. Dont be timid when it comes to gun safety. If you observe other shooters violating any of these safety precautions, politely suggest safer handling practices. 21 SUPERVISE AND TEACH FIREARMS SAFETY TO ALL MEMBERS OF YOUR FAMILY. This is especially important when children and non-shooters are involved. Closely supervise newcomers to the shooting sports. Encourage enrollment in hunting/shooting safety courses. 22 NEVER DRINK ALCOHOLIC BEVERAGES OR TAKE ANY TYPE OF DRUGS BEFORE OR DURING SHOOTING. Your vision and judgment could be dangerously impaired, making your gun handling unsafe to you or to others. 23 PERIODIC MAINTENANCE AVOID UNAUTHORIZED SERVICING. Your BDA 380 is a mechanical device which will not last forever, and as such, is subject to wear and requires periodic inspection, adjustment and service. Like all Browning firearms, your BDA 380 should be serviced by a Browning Recommended Service Center or by our service facility in Arnold, Missouri.

WE CANNOT ASSUME ANY RESPONSIBILITY FOR INJURIES SUFFERED OR CAUSED BY UNAUTHORIZED SERVICING, ALTERATIONS OR MODIFICATIONS OF OUR FIREARMS.
Read and heed all warnings in this owners manual, on ammunition boxes and with all accessories that you install on your firearm. It is your responsibility to secure the most up-to-date information on the safe handling procedures for your Browning gun. We assume no liability for incidents which occur when unsafe or improper gun accessories or ammunition combinations are used. Do not, under any circumstance, alter the trigger, safety or parts of the firing mechanism of this or any other firearm. Failure to obey this warning may result in injury or death to yourself or others.

BE CAREFUL!

FIGURE 1
Rear Sight Hammer Extractor Slide Muzzle
Frame Takedown Lever Front Sight Grip Serial Number Takedown Lever Stop Trigger

Decocking Safety Lever

Magazine

Slide Release/Stop Latch

Magazine Release

N O M E N C L AT U R E

In conventional gun terminology, the position and movement of pistol parts are described as they occur with the pistol horizontal and in normal firing position, i.e. the muzzle is forward or front; the pistol grip is rearward or rear; the trigger is downward or underneath; the sights are upward or on top. For general nomenclature refer to Figure 1.

SERIAL NUMBER

The serial number of your BDA 380 Pistol can be found stamped on the left side of the frame, in front of the trigger guard (Figure 1).

INITIAL CLEANING

Before the first firing, clean the inside of the barrel, slide, and frame. Use a clean rag and light gun oil such as Browning Oil. For general
cleaning procedures, see instructions under the section Cleaning and Lubrication on page 25.

AMMUNITION

Your pistol must be used only with.380 ACP ammunition as shown by the inscription on the exposed portion of the barrel (visible through the ejection port when the slide is fully forward). The barrel and action of this pistol have been made with substantial safety margins over the pressures developed by established U.S. commercial loads. Nevertheless, Browning can assume no responsibility for incidents which occur through the use of cartridges of nonstandard dimensions or those developing pressure in excess of SAAMI (Sporting Arms and Ammunition Manufacturers Institute) established standards.

MAGAZINE CAPACITY

Browning BDA 380 pistols have a magazine capacity of 13 rounds plus one in the chamber, for a total capacity of 14 rounds. However, some states limit the magazine capacity to 10 rounds plus one in the chamber, for a total capacity of 11 rounds. All BDA 380 pistols sold in these states will be shipped with reduced total magazine capacity in compliance with state law. IMPORTANT: Current 13 round magazines will have a 13 stamped under the lowest index hole on the back of the magazine. 10 round magazines can be identified by the number 10 stamped below the lowest hole. Make sure you have verified the capacity of your magazine before loading it in your pistol.

G E N E R A L O P E R AT I O N
Your Browning BDA 380 is a blowback operated semiautomatic pistol. The slide is forced rearward by the cartridge pressure and continues rearward travel to accomplish extraction, ejection, and cocking. The recoil spring then causes forward travel, feeding a loaded round from the magazine and returning the slide and barrel to the firing position. The slide of this pistol is designed to stay open after the last cartridge has been fired and ejected.
O P E R AT I N G T H E S A F E T Y D E C O C K I N G L E V E R
The ambidextrous, thumb-operated safety/decocking lever is located on both sides at the rear of the slide. It has twin finger pieces located on each side of the slide so that it can be conveniently operated by a leftor right-handed shooter. Both finger pieces are serrated for positive manipulation.
CAUTION: BECAUSE THE SAFETY IS ALSO THE DECOCKING LEVER, SPECIAL ATTENTION MUST BE GIVEN TO THE POSITION OF THE LEVER WHEN CLOSING THE SLIDE FAILURE TO PLACE THE SAFETY IN THE OFF SAFE POSITION PRIOR TO CLOSING THE SLIDE MAY RESULT IN A DAMAGED DECOCKING SYSTEM. WHEN DECOCKING THE HAMMER, ALWAYS MAKE SURE YOUR PISTOL IS POINTED IN A SAFE DIRECTION.
MANUAL SAFETY FUNCTION On Safe To place the pistol in the on safe position, press the safety/decocking lever fully downward with your thumb (Figure 2A). When the safety/decocking lever is pressed fully downward, the hammer will move to the decocked position (if it was in full cock position when safety was pressed down). Off Safe To place the safety in the off safe or ready-to-fire position, press the safety/decocking lever forward and up, exposing the red warning dot. The red warning dot appears on both sides of the slide (Figure 2B). With a round in the chamber and the magazine inserted, the pistol is ready for firing with a pull on the trigger. NOTE: This pistol cannot be on safe with the hammer in the full cock position. Because the safety is also the decocking lever, depressing the safety/decocking lever will cause the hammer to move to the decocked position (if the hammer was cocked before you placed the pistol on safe). This does require firm pressure on the safety/decocking lever. Do not press the safety/decocking lever partially downward, leaving the hammer in the full cock position, and assume the pistol is on safe. It is not. If the hammer does not move from the full cock position to the decocked position, the safety/decocking lever is not in the on safe position. The hammer cannot be cocked with the safety/decocking lever in the on safe position.

FIGURE 2A

FIGURE 2B

On Safe position.

Off Safe or ready-to-fire position.
DECOCKING LEVER FUNCTION The safety/decocking lever also functions as a decocking lever to provide a safer method of lowering the hammer from full cock to the decocked position without having to depress the trigger. With the muzzle pointed in a safe direction and your finger away from the trigger, simply depress the safety/decocking lever fully down with your thumb (Figure 3). The hammer will lower to the decocked position.
CAUTION: THE HAMMER SHOULD ONLY BE LOWERED TO THE DECOCKED POSITION USING THE COMBINATION SAFETY/DECOCKING LEVER. WHEN DECOCKING THE HAMMER, ALWAYS MAKE SURE YOUR PISTOL IS POINTED IN A SAFE DIRECTION. DO NOT ATTEMPT TO MOVE THE HAMMER TO THE DECOCKED POSITION BY PULLING THE TRIGGER AND LOWERING THE HAMMER WITH YOUR THUMB AS WITH SOME OTHER STYLES OF FIREARMS.

FIGURE 3

NOTE: Be sure to fully depress the safety/decocking lever to lower hammer from the full cock to the decocked position. Keep your finger away from the trigger. Be sure the hammer moves to the decocked position.
Depress the safety/decocking lever.

FIGURE 4

Dropped Position Decocked Position Full Cock Position

FIGURE 5

Depress the slide release/stop latch.
O P E R AT I O N O F T H E H A M M E R
The Browning BDA 380 has an exposed hammer with dropped, decocked, and full cock positions. DROPPED POSITION. This is the momentary position of the hammer after the trigger is pulled (Figure 4) when dry firing or if a round failed to fire in the chamber. In the dropped position, the hammer is fully fallen and resting against the inertia firing pin, but the firing pin is not in contact with the cartridge primer. (The firing pin must be struck forcefully by the hammer in order to achieve enough momentum to contact and indent the primer, causing cartridge ignitions.) DECOCKED POSITION. The decocked hammer position is between the dropped and full cock position (Figure 4). This is the position the hammer should be located in at all times when carrying or storing your pistol. The decocked position is provided as the primary, safest location of the hammer at any time the slide is closed. FULL COCK POSITION. When at full cock, the hammer is all the way to the rear (Figure 4). In the full cock position, with the safety/decocking lever in the off safe position, and with a cartridge in the chamber, the pistol is ready to fire by pulling the trigger.
S L I D E R E L E A S E / S T O P L AT C H

With an empty magazine inserted, the slide can be locked open simply by grasping the slide serrations immediately forward of the safety/decocking lever and drawing the slide fully rearward until the slide release/stop latch automatically rotates upward into its appropriate recess. (If a magazine is not inserted, the slide release/stop latch must be manually pushed upward into its recess in the slide.) After the last shot has been fired from the magazine the slide will lock rearward. This position is an additional safety measure and allows easy inspection of the barrel chamber. This is also the recommended attitude of the pistol at all times prior to loading and while storing the pistol. To close the slide, be certain the safety/decocking lever is in the off safe position and your fingers are away from the ejection port and trigger. With the muzzle of the pistol pointed in a safe direction, simply depress the slide release/stop latch located on the left side of the frame (Figure 5). NOTE: Failure to put the safety/decocking lever in the off safe position while closing the slide may cause damage to the decocking system. After closing the slide, be certain the safety/decocking lever is moved to the on safe position, which will also decock the hammer.
INSERTING CARTRIDGES INTO THE MAGAZINE
1 With the slide closed, the safety/decocking lever in the on safe position, and the muzzle pointing in a safe direction, press the magazine latch on the left side of the frame at the rear of the trigger guard and remove the magazine. As a safety precaution, operate the slide manually and visually inspect the chamber to eliminate any possibility of a cartridge being in the chamber. Close the slide, remembering the safety/decocking lever must be in the off safe position to prevent damage to the decocking system. It is possible to lock the slide open before inserting a loaded magazine. However, we recommend that the slide be closed before inserting a loaded magazine. If the slide is locked open when a magazine is inserted, and the slide is then closed using the slide lock, a cartridge will be fed into the chamber as the slide closes. The pistol could then be fired with the pull of the trigger.

FIGURE 6 Insert the cartridges into the magazine by pushing them down and sliding them rearward with your thumb (Figure 6). Start the cartridge into the magazine (bullet forward) by pushing downward on the front of the follower with the base of the cartridge and then pushing the cartridge rearward under the lips until Loading the magazine. the cartridge is fully rearward. Subsequent cartridges are loaded similarly, with the base of the new cartridge being pushed down on the already inserted round until the new cartridge can be slipped under the lips of the magazine.
REMEMBER: The recommended maximum carrying capacity of the BDA 380 is 13 rounds with the chamber empty (10 rounds in limited capacity magazines with the chamber empty). The number of cartridges in the magazine can be visually verified following the instructions under Other Features on page 22 in this owners manual.
LOADING THE MAGAZINE INTO THE PISTOL
Do not load a cartridge into the chamber until shooting is imminent. Insert the loaded magazine into the magazine well at the base of the grip, being certain that the magazine is pressed in completely until retained by the magazine latch. The safety/decocking lever should remain in the on safe position.

TO LOAD THE CHAMBER

To load the chamber, point the muzzle in a safe direction, keep your finger away from the trigger and place the safety/decocking lever in the off safe position and pull the slide completely back. Allow the slide to move forward under spring pressure, feeding the first cartridge from the magazine into the chamber. CAUTION: The pistol is now cocked and
can be fired by simply squeezing the trigger. Be sure the safety/decocking lever is placed in the on safe position immediately after feeding the first round (which will decock the hammer) unless shooting is imminent.
S P E C I A L I N S T R U C T I O N S F O R L AW ENFORCEMENT AND COMPETITIVE SHOOTERS
Several BDA 380 functions are for specialized purposes in law enforcement and competitive shooting only. They are the loaded chamber indicator and the procedure for loading a full magazine with the slide locked rearward (below).
L O A D E D C H A M B E R I N D I C AT O R
CAUTION: Remember, under all conditions, always assume that the chamber of your BDA 380 is loaded. But, to be of assistance, especially in the case of a law enforcement officers, the BDA 380 has a special loaded chamber indicator. The loaded chamber indicator is to be used only to confirm or verify that a round is in the chamber. In any situation, to use the loaded chamber indicator, (1) shooting should be imminent, (2) you have already loaded the chamber, and (3) you are in a situation where it is an advantage to confirm that the chamber is loaded. Never use the loaded chamber indicator to determine whether the chamber is loaded or not. When there is a round in the chamber, the forward portion of the extractor will cam outward slightly, exposing a red index mark. This index mark is FIGURE 7 located on the top, forward surface of the extractor. The extractor is a slender bar, about 114" long, located on the right side of the slide immediately behind the ejection port (Figure 7). With practice, the protrusion can be both seen and felt. Remember, the loaded chamber Protruding Extractor indicator is only for confirming that a round is in the chamber The protruding extractor (with red index mark) when shooting is imminent. confirms that a round is present in the chamber.

FIGURE 8

The slide moves rearward about 34" past the end of the frame.
fire or if shooting is no longer imminent. After the last shot is fired, the slide lock on the left side causes the slide to remain back. At this point, we recommend that the magazine be removed and then the slide closed (by releasing the slide release/stop latch), before a loaded magazine is inserted in the pistol as previously described in the Loading section.
CAUTION: YOU WILL HAVE OBSERVED, BY PULLING THE SLIDE BACK TO COCK THE PISTOL, THAT THE SLIDE MOVES REARWARD ABOUT " PAST THE REAR OF THE FRAME (FIGURE 8). IN SHOOTING, NEITHER HAND SHOULD BE IN A POSITION WHERE IT COULD BE HIT BY THE SLIDE IN ITS REARWARD MOVEMENT, NOR SHOULD UNORTHODOX SIGHTING METHODS BE USED WHERE THE PISTOL IS HELD CLOSE TO THE EYE OR FACE.

UNLOADING

1 With the muzzle pointed in a safe direction and the safety/decocking lever in the on safe position, depress the magazine release on the left side of the frame and remove the magazine. CAUTION: KEEP YOUR FINGER OFF THE TRIGGER WHILE REMOVING THE MAGAZINE, AND THROUGHOUT THE UNLOADING PROCESS. GRIP THE SLIDE AND DRAW IT SHARPLY REARWARD AND LOCK THE SLIDE TO THE REAR BY RAISING THE SLIDE STOP. THIS WILL CLEAR ANY ROUND THAT MAY BE IN THE CHAMBER AND EJECT THAT ROUND. Visually inspect both the chamber and magazine channel to be sure your pistol is unloaded.The safest way to store your pistol is to leave the slide back and the magazine removed. Strip any loaded cartridges from the magazine by pushing forward on the rear of the top cartridge and sliding each cartridge out, one at a time, as each moves up in the magazine. Also, be sure to fully

FIGURE 9A

FIGURE 9B
Slide Release/Stop Latch Take Down Lever Stop
Move the slide rearward and push in slide stop to lock it rearward.
Press and hold the take down lever stop.
unload any spare magazines at the same time. The magazine and cartridges should be stored separately from the pistol.

D I S A S S E M B LY

WEAR EYE PROTECTION AT ALL TIMES WHEN PERFORMING MAINTENANCE ON YOUR PISTOL. It is important that you become adept at disassembling (field stripping) your BDA 380 pistol. Disassembly into major component groups is necessary for thoroughly cleaning your pistol and assuring reliable operation. FIRST, BE CERTAIN YOUR PISTOL IS COMPLETELY UNLOADED by removing the magazine and inspecting the chamber as explained previously. Be sure to use eye protection whenever disassembling and reassembling your pistol due to the spring-tensioned parts. 1 Be sure the safety/decocking lever is in the on safe position. 2 Unload your BDA 380 by removing the magazine, as explained under Unloading on page 18, and visually inspect the chamber to ensure no rounds remain. 3 Lock the slide rearward by pulling the slide back and engaging the slide stop/release latch into the disassembly recess on the slide (Figure 9A). 4 Depress the takedown lever stop (Figure 9B). This is the small, button-like part that extends out of the frame just forward of the slide stop/release lever. The takedown lever stop passes through the

FIGURE 9C

FIGURE 10
Takedown Lever Rotate takedown lever 90 degrees downward. Lift out the barrel.
frame of the pistol from the left to the right side. The takedown lever (on the right side) will not rotate unless the takedown lever stop is pushed in (on the left side), releasing the lever to rotate. With the button depressed, rotate the takedown lever on the right side of the frame 90 degrees downward (Figure 9C). 5 Place the safety/decocking lever in the off safe position. 6 While holding the frame with one hand, and the slide with the other hand, pull the slide rearward slightly to release the slide release/stop latch, then guide the slide forward off the frame. The slide will be under spring pressure for part of its travel. Carefully push it the rest of the way off the frame. 7 Push the slide forward on the frame rails until the slide is completely removed from the frame. 8 While holding the slide, press the head of the recoil spring guide forward to release the head of the recoil spring guide from the barrel. Remove the recoil spring and its guide. 9 To remove the barrel from the slide, lift up the barrel lug and slide the barrel out rearward (Figure 10). Disassembly to this point is sufficient for normal maintenance of your pistol (Figure 11). No further disassembly is recommended as the pistol is now stripped adequately for normal maintenance and cleaning. WARNING: IF FURTHER DISASSEMBLY SHOULD EVER BECOME NECESSARY IT SHOULD ONLY BE PERFORMED BY OUR SERVICE FACILITY IN ARNOLD, MISSOURI, OR AN AUTHORIZED BROWNING SERVICE CENTER. NO OTHER

FIGURE 11

Slide Barrel Lug Recoil Spring Barrel Recoil Spring Guide

FIGURE 12

Barrel Lug

Barrel Lug Recess

Head of Recoil Spring Guide Magazine Frame Disassembly to this point is sufficient for normal maintenance of your pistol. When assembling, be sure the head of the recoil spring guide is inserted in the concave barrel lug recess.
PERSON SHOULD ATTEMPT TO PERFORM FURTHER DISASSEMBLY/REASSEMBLY PROCEDURES. INCORRECT REASSEMBLY COULD RENDER THE BDA 380 INOPERATIVE OR UNSAFE. FAILURE TO FOLLOW THIS INSTRUCTION CAN RESULT IN DAMAGE TO YOUR GUN AND POSSIBLE SERIOUS INJURY OR DEATH TO YOURSELF AND OTHERS. You are now ready to clean your BDA 380 as explained under Cleaning and Lubrication on page 25.

FIGURE 13

Magazine Spring

FIGURE 14

Magazine Body

Buttplate

Follower

Disassembled Magazine.

Indexed view holes are marked with the numbers 5 and 10. (10 round magazine shown.)
are indexed with the numbers 5 and 10 (Figure 14). If the base of a cartridge shows in the 10 hole, your magazine is fully loaded. The top (number 5) hole simply offers an estimate of the remaining cartridges. The extended lip on the floor plate allows easy manipulation and removal of the magazine under all conditions.
M A G A Z I N E D I S A S S E M B LY
WEAR EYE PROTECTION AT ALL TIMES WHEN PERFORMING MAINTENANCE ON YOUR PISTOL.
Release the buttplate from the magazine by pressing on the release button through the hole in the bottom of the buttplate. The button is simply a protrusion on the buttplate retainer that engages in the buttplate under pressure from the magazine spring. You can use a thin screw driver or other suitable object to disengage it. With the button held depressed, slide the buttplate off of the rails toward the front of the magazine. CAUTION: THE SPRING IS UNDER HEAVY TENSION AND WILL TEND TO SPRING OUT. Carefully remove the magazine spring. The buttplate retainer will usually stay connected to the spring. Note its position. Be prepared to retain the spring, as it is compressed and may spring out unless controlled. Allow the spring assembly to release its tension, then remove the
spring from the magazine body. Remove the follower from the magazine body. Note its position. Perform any cleaning and maintenance as outlined in the section Cleaning and Lubrication on page 25.

FIGURE 15

MAGAZINE R E A S S E M B LY
Windage adjustments on fixed sight models.
Position the follower on the spring with the notch in the top of the follower upward. The follower will fit into the top coil of the spring at about a 45 degree angle. The notched end of the follower will be toward the top. Insert the spring assembly (with the follower attached) into the magazine body. Make sure that the notched (or upper) part of the follower is facing toward the front of the magazine. Leave the spring hanging out, uncompressed at this time. Make sure the buttplate retainer is attached to the magazine spring. Insert the end of the spring through the keeper on the buttplate retainer: round edge to the front, release button downward. Push the spring and retainer the rest of the way into the magazine body. Be very careful. The spring is under tension and will tend to spring out. Hold the retainer down, inside the magazine with one hand while you slide the buttplate onto the rails starting the buttplate at the front of the magazine body and sliding it rearward until the buttplate retainer snaps into position. The shape of the buttplate corresponds to the shape of the buttplate retainer and the overall shape of the bottom of the magazine body rounded edges all to the front, flat edges all to the rear. The magazine is now ready for use.

SIGHT ADJUSTMENT

The BDA 380 is equipped with a fixed front sight and a windage adjustable rear sight. Before adjusting the sights, BE CERTAIN YOUR PISTOL IS UNLOADED. The windage adjustment (horizontal correction) is preset at the factory. However, should it ever be required, the rear sight may be moved in its dovetail slot in the slide. This is accomplished by lightly tapping the base of the rear sight in the same direction you want the bullet to move; i.e., if you want the point of impact to move to the left, tap the rear sight to the left; if you want to move the point of impact to the right, tap the rear sight to the right. A small wooden dowel or comparable nonmetallic object should be used to bear against the sight base during tapping to avoid marring the finish (Figure 15). Correct adjustment is a process of trial and error using the method described above.
C L E A N I N G A N D L U B R I C AT I O N
FIRST, BE CERTAIN YOUR PISTOL IS COMPLETELY UNLOADED. REMOVE THE MAGAZINE AND VERIFY THAT THE CHAMBER DOES NOT CONTAIN A CARTRIDGE. KEEP ALL AMMUNITION AWAY FROM THE CLEANING SITE. NEVER TEST THE MECHANICAL FUNCTION OF YOUR PISTOL WITH LIVE AMMUNITION. WEAR EYE PROTECTION AT ALL TIMES WHEN CLEANING AND PERFORMING MAINTENANCE ON YOUR PISTOL.
Different cartridge loadings, weather and shooting conditions all contribute to the frequently required in cleaning your pistol. A good rule to follow is to clean your pistol after every use. If extensive shooting will be performed, it is wise to clean your pistol after each 500 rounds. Excessively dirty rounds may require more frequent cleaning. Excessive grit and dirt can affect the function of even the finest firearm. Cleaning cannot be overemphasized. 1 Disassemble the pistol as previously described on page 19 in the section titled Disassembly. Clean the bore using a pistol cleaning rod and patch made for.380 caliber pistols, working back and
forth until a patch comes through clean. Be careful not to impact or mar the crown of the muzzle as it can affect accuracy. Cleaning from the breech end can reduce this danger. Depending on the amount of use, the barrel may need to be cleaned with a good quality nitro solvent. Ordinarily, a light lubricating oil like Browning Oil will suffice for this purpose. The slide assembly may be cleaned with solvent or oil and then wiped dry with a clean cloth. Use a small brush to remove dirt or other foreign matter from the other parts of the action. Totally wipe all parts clean. Lightly lubricate all moving parts, sparingly, with oil. Pay special attention to the slide rails and the bearing surfaces of all levers and moving parts. A good rule to follow is to oil all major components and internal parts, then wipe away any excess. A light film on moving parts is sufficient. IMPORTANT: Fine oils tend to evaporate. If your BDA 380 has been stored for any length of time, completely relubricate before shooting. Periodically wash the magazine in a good gun cleaning solvent to keep the magazine spring and follower functioning well. Disassemble before cleaning, as explained previously. Bullet lubricants, oil and dirt can make these magazine components sluggish. Do not heavily oil the internal parts of the magazine, as the oil can serve to collect grit and foreign matter. A fine film is sufficient. It is appropriate to wipe the external parts of the pistol with a slightly oiled cloth after handling and to put a drop of oil on the friction points from time to time. Frequently inspect your pistol and magazine to determine a need for cleaning.

DO NOT TAKE YOUR GUNS ACTION APART BEYOND THE EXTENT EXPLAINED IN THIS OWNERS MANUAL. This is a specialized, finely fitted mechanism, and you may mar it for life by an attempt to disassemble the inner mechanism assemblies. Do not disassemble the trigger mechanism or any other parts more than described. If further disassembly is required, take your gun to a Browning Recommended Service Center or a competent gunsmith.

SERVICE OR REPAIR

If your firearm should require service or repairs, we suggest you first contact a local recommended Browning Firearms Service Center. Contact your Browning sporting goods dealer or call our Service Department for the address of the Service Center nearest you. Otherwise, you may send your firearm directly to our own Service Department. For technical questions about your firearm or service, contact: Browning Service Department One Browning Place Arnold, MO 63010-9406 Phone: 1-800-322-4626 Canadian Customers call or write: Browning Canada Sports Ltd./Ltee, 5583 Chemin St-Franois St-Laurent, Quebec H4S 1W6 Phone: (514) 333-7261 When returning your firearm for servicing, you must do the following: 1 Be sure it is completely unloaded. 2 Package it securely in a cardboard container. 3 Enclose a letter with your firearm that clearly describes the trouble experienced, the ammunition used and the repairs desired. Also include your name and a phone number where you can be reached. 4 If convenient, send a copy of the letter to us separately. 5 Never return ammunition with your firearm. It is against postal and most commerce regulations. If you have any questions about this owners manual or about any other Browning products, call or write our Consumer Information Department: Browning Consumer Information One Browning Place Morgan, UT 84050 Phone: (801) 876-2711
BROWNING US: Morgan, Utah 84050-9326 BROWNING CANADA: Browning Canada Sports Ltd/Ltee, St-Laurent, Quebec, H4S 1W6 BROWNING INTL: Parc Industriel des Hauts-Sarts, B-4040 Herstal, Belgium NEU05011.5/04426

BROWNING.COM

ACTION SPRING ALL GAUGES ACTION SPRING FOLLOWER ALL GAUGES ACTION SPRING PLUG ALL GAUGES ACTION SPRING PLUG PIN ALL GAUGES ACTION SPRING PLUG PIN STALKER ACTION SPRING TUBE ALL GAUGES (UNTHREADED) BARREL EXTENSION ASSY 12 BARREL EXTENSION ASSY 16 BARREL EXTENSION ASSY 20 BARREL EXTENSION ASSY MAG 12 BARREL EXTENSION ASSY MAG 20 BREECH BLOCK 12-M-12 BREECH BLOCK 16 (FOR IN SHOP REPAIR ONLY) BREECH BLOCK 20 BREECH BLOCK MAG 20 BUTT PLATE ALL GAUGES BUTT PLATE SCREW ALL GAUGES BUTT STOCK SWIVEL EYELET ALL GAUGES CARRIER ASSEMBLY 2 PIECE 12 CARRIER ASSEMBLY 2 PIECE 16 CARRIER ASSEMBLY 2 PIECE 20-20M CARRIER ASSEMBLY MAG 12 CARRIER DOG 12M-12 CARRIER DOG 16-20-20M CARRIER DOG FOLLOWER 12M-12 CARRIER DOG FOLLOWER 16-20-20M CARRIER DOG PIN 12M-12 CARRIER DOG PIN 16-20-20M CARRIER DOG SPRING 12M-12 CARRIER DOG SPRING 16-20-20M CARRIER LATCH ASSEMBLY 12 CARRIER LATCH ASSEMBLY 12 MAGNUM CARRIER LATCH ASSEMBLY 16 CARRIER LATCH ASSEMBLY 20-20M CARRIER LATCH BUTTON 12 CARRIER LATCH BUTTON 12M-16 CARRIER LATCH BUTTON 20-20M CARRIER SCREW ALL GAUGES CARRIER SPRING (TRIGGER PLATE TYPE) 12M-12 CARRIER SPRING (TRIGGER PLATE TYPE) 16-20-20M CARTRIDGE STOP 12M-12 CARTRIDGE STOP 16-20-20M CARTRIDGE STOP SPRING ALL GAUGES CARTRIDGE STOP/CARRIER LATCH/ MAGAZINE CUT OFF PIN EJECTOR & EJECTOR ROD MAGNUM 20 EJECTOR 12 & PRE-WAR 16 EJECTOR 16-20 & 12M (REPLACES B1111125 MAG 12) EJECTOR RIVET 12 EJECTOR RIVET 12M-16-20
$2.50 $3.75 $2.00 $2.00 $2.00 $5.00 $110.00 $110.00 $110.00 $110.00 $110.00 $110.00 $110.00 $110.00 $110.00 $5.00 $2.50 $10.75 $86.00 $86.00 $86.00 $86.00 $12.25 $12.25 $2.25 $2.25 $2.25 $2.25 $1.75 $1.75 $12.50 $12.50 $12.50 $12.50 $3.50 $3.50 $3.50 $3.25 $3.25 $3.25 $12.00 $12.00 $1.75 $1.75 $13.25 $15.00 $15.00 $3.25 $3.25

30 NS NS 41A 41B 48

B1111124 B1111126 * B1111147 B1111155 * B1111150 B1111148 B1111164 * B1111149 B1111159 B1111163 B1111160 B1111162 * B1111165 * B1111167 B1111168 B1111169 * B1111172 * B1111170 * B1111183 * B1111191 * B1111192 * B1111175 * B1111176 B1111197 B1111199 B1111195 B1111198 B1111205 B1111207 B1111215 B1111216 * B1111228 * B1111225 * B1111232 B1111235 B1111237 B1111240 B1111247 B1111245 B1111251 B1111243 B1111252 B1111254 B1111280 * B1111256 * B1111261 B1111265 B1111264 B1111269 B1111272 B1111275 B1111277
EJECTOR SPRING MAGNUM 20 EJECTOR SPRING RETAINER MAGNUM 20 EXTRACTOR LEFT 12M-12-16-20 EXTRACTOR PIN LEFT & RIGHT ALL GAUGES EXTRACTOR RIGHT 12M-12-16-20 EXTRACTOR SPRING FOLLOWER MAG 20 EXTRACTOR SPRING FOLLOWER RIGHT 16-20 EXTRACTOR MAG 20 EXTRACTOR SPRING LEFT 12M-12-16-20 EXTRACTOR SPRING MAG 20 EXTRACTOR SPRING RIGHT 12M-12 EXTRACTOR SPRING RIGHT 16-20 FIRING PIN 12M-12 FIRING PIN 16-20-20M FIRING PIN STOP PIN 12M-12 FIRING PIN STOP PIN 16-20-20M FOREARM 5-SHOT 12 FOREARM 5-SHOT 12M FOREARM 5-SHOT 16 FOREARM 5-SHOT 20 FOREARM 5-SHOT 20M FOREARM 5-SHOT COMPOSITE 12 FOREARM 5-SHOT COMPOSITE 12M FRICTION PIECE BRONZE 12 FRICTION PIECE BRONZE 16-20 FRICTION PIECE BRONZE MAGNUM 12 FRICTION PIECE BRONZE MAGNUM 20 FRICTION RING 12M-12 FRICTION RING 16-20-20M FRICTION SPRING 12 FRICTION SPRING 16-20 HAMMER ASSY 12 HAMMER ASSY 12M HAMMER ASSY 16-20-20M HAMMER PIN ALL GAUGES HAMMER ROLLER HAMMER ROLLER PIN LINK 12 LINK 12M LINK 16-20 LINK 20M LINK PIN 12M-12 LINK PIN 16-20-20M LOCK SCREW ALL GAUGES LOCKING BLOCK 12M-12 LOCKING BLOCK 16-20-20M LOCKING BLOCK LATCH 12M LOCKING BLOCK LATCH 20M LOCKING BLOCK LATCH 2-PIECE CARRIER 12 LOCKING BLOCK LATCH 2-PIECE CARRIER 16-20 LOCKING BLOCK LATCH PIN ALL GAUGES LOCKING BLOCK LATCH SPRING 12M-12

MAGAZINE CAP 12 GA (WITH EYELET) MAGAZINE CAP 12 GA MODB MAGAZINE CAP 12 GA MOBR 12 (06) MAGAZINE CAP 12 GA MONBU MAGAZINE CAP 12 GA MONSG MAGAZINE CAP 12 GA MOSG MAGAZINE CAP 16-20-28-.410 MAGAZINE CAP 16-20-28-.410 (WITH EYELET) MAGAZINE CAP 20 GA MONBU MAGAZINE CAP STOP SPRING ALL GAUGES MAGAZINE CAP STOPPER ALL GAUGES MAGAZINE FOLLOWER 12 GA 3.5" PRE 1998 MAGAZINE FOLLOWER 10 GA MAGAZINE FOLLOWER 12 GA MAGAZINE FOLLOWER 16 & 20 GA MAGAZINE FOLLOWER 28 GA MAGAZINE FOLLOWER.410 Bore MAGAZINE SPRING 10 GA (12 GA 3.5" PRE 1998) MAGAZINE SPRING 12 GA MAGAZINE SPRING 16-20-28-.410 MAGAZINE SPRING RETAINER 10 GA (12 GA 3.5" PRE 1998) MAGAZINE SPRING RETAINER 12 GA MAGAZINE SPRING RETAINER 16-20-28-.410 MAGAZINE THREE SHOT ADAPTOR 10 GA (12 GA 3.5" PRE 1998) MAGAZINE THREE SHOT ADAPTOR 12 GA 3.5" (98) MAGAZINE THREE SHOT ADAPTOR 12-1620-28-.MAGAZINE TUBE 10 GA (12 GA 3.5" PRE 1998) MAGAZINE TUBE 12 GA NEW TYPE (WITHOUT MAGAZINE CUT OFF) MAGAZINE TUBE 12 GA TRAP (W/ MAGAZINE CUT OFF) (07) MAGAZINE TUBE 16 GA MAGAZINE TUBE 20 GA MAGAZINE TUBE.410 Bore MAGAZINE TUBE SLEEVE 12 GA 3.5" PRE 1998 (USED WITH 10 GA TUBE) MAGAZINE TUBE SLEEVE 28 GA (USED WITH 20 GA TUBE) RECEIVER 10 GA RECEIVER 10 GA (LP 98) RECEIVER 10 GA STALKER RECEIVER 10 GA WATERFOWL RECEIVER 12 GA RECEIVER 12 GA (LP 98) RECEIVER 12 GA 3.5" (98) RECEIVER 12 GA 3.5" PRE 1998 RECEIVER 12 GA 3.5" STALKER PRE 1998 RECEIVER 12 GA 3.5" STALKER (98) RECEIVER 12 GA DEER MODEL
$24.50 $28.75 $28.75 $23.00 $28.75 $23.00 $18.25 $24.50 $23.00 $1.00 $2.25 $1.75 $1.75 $2.25 $2.25 $9.75 $11.00 $2.25 $1.50 $1.50 $1.25 $1.25 $1.25 $2.50 $2.50 $2.50 $25.50 $18.75 $40.25 $28.75 $18.75 $35.00 $8.25 $7.25 $375.00 $322.00 $300.00 $675.00 $310.00 $300.00 $300.00 $375.00 $375.00 $300.00 $375.00
* B1221712 *+ *+ *+ *+ *+ *+ *+ *+ *+ *+ *+ B1221415 B1221229 B1221419 B1221418 B1221115 B1221230 B1221208 B1221615 B1221619 B1221225 B1221121
39 NS NS 39A 39A 39A NS NS NS NS 45A NS NS NS NS 48 NS 52 53
*+ B1221817 *+ *+ *+ *+ *+ *+ *+ *+ *+ *+ B1221109 B1221118 B1221119 B1221123 B1221860 B1221117 B1221231 B1221252 B1221717 B1221257 B1221209
B1221256 B1221210 B1221255 B1221416 * B1221201 * B1221204 * B1221129 * B1221125 * * * * * * * * * * B1221128 B1221130 B1221132 B1221226 B1221122 B1221133 B1221434 B1221135 B1221221 B1221134 B1221137 B1221139 B1221140 B1221442 B1221142 B1221145 B1221146 B1221148 B1221147 B1111403 B1111401 B1221152 B1221151 B1111431 B1111399

51A 55

* B179328B * B1793629 * B1793233 * B1793230 * B1793996 B1793787 B1793242 * B1793050 * B1793235 * B1793802 B1793052 B1793053 B1793054 B1793055 B1793057 B1793058 B1793060 B1793064 B1793805 B1793642 B1793810 * B1793068 * B1793815 B1793070 B1793074 B1793078
$795.00 $448.00 $179.00 $488.75 $220.00 $3.50 $1.25 $84.00 $26.25 $17.00 $12.50 $3.25 $6.25 $3.75 $40.75 $1.00 $4.25 $3.50 $2.50 $1.00 $1.25 $73.25 $17.00 $2.25 $7.50 $4.25

58 NS 62A NS 75 NS NS NS

B1793254 B1793830 B1793080 B1793245 B1793833 B1793082 B1793083 B1793220 B1793836 * B1793085 B1793086 * B1793676 * B1793665 B1793636 B1793674 B1793646 B1793667 B1793638 B1793645 B1793666 B1793611 B1793610 B1793609 B1793997 B1793614 B1793623 B1793608 B1793618 B1793625 B1793626 B1793616 B1793678 B1793612 B1793620 B1793218 B1793624 * * * * * B1793088 B1793089 B1793222 B1793248 B1793840 B1793842 B1793090 B1793845
MAINSPRING BT-99 ('06) MAINSPRING BT-99 MAX MAINSPRING GUIDE BT-100 MAINSPRING GUIDE BT-99 (01) MAINSPRING GUIDE BT-99 MAX MAINSPRING GUIDE RECEIVER BT-100 MAINSPRING GUIDE RECEIVER PIN BT-100 MAINSPRING SLEEVE BT-99 (01) MAINSPRING SLEEVE BT-99 MAX PUSH ROD BT-100 PUSH ROD RETAINING PIN BT-100 RECOIL PAD ASSEMBLY BT-99 & CITORI PLUS RECOIL PAD BT-99 & BT-100 RECOIL REDUCER ADJUSTING SCREW LOCK NUT RECOIL REDUCER ASSEMBLY BT-99 PLUS RECOIL REDUCER PAD PLATE BT-99 & CITORI PLUS RECOIL REDUCER PAD PLATE SCREW BT-99 & CITORI PLUS RECOIL REDUCER PAD PLATE SET SCREW BT-99 & CITORI PLUS RECOIL REDUCER STOCK PLATE BT-99 & CITORI PLUS RECOIL REDUCER STOCK PLATE SCREW BT-99 & CITORI PLUS RIB ASSEMBLY BT-99 MICRO PLUS 28" RIB ASSEMBLY CITORI 30" & BT-99 PLUS 32" RIB ASSEMBLY CITORI 32" & BT-99 PLUS 34" RIB BT-99 MICRO (04) 28" RIB ELEVATOR DETENT SPRING BT-99 & CITORI PLUS RIB ELEVATOR NUT BT-99 & CITORI PLUS RIB ELEVATOR SCREW BT-99 & CITORI PLUS RIB ELEVATOR SCREW PIN BT-99 & CITORI PLUS RIB ELEVATOR SPRING BT-99 & CITORI PLUS RIB ELEVATOR SPRING TYPE II (93) BT-99 & CITORI PLUS RIB ELEVATOR SPRING FOLLOWER BT-99 & CITORI PLUS RIB PIN PUNCH BT-99 & CITORI PLUS RIB PIVOT BT-99 & CITORI PLUS RIB PIVOT PIN FRONT BT-99 & CITORI PLUS RIB POST PIN BT-99 (01) RIB VIBRATION DAMPER BT-99 & CITORI PLUS SEAR ADJUSTING SCREW BT-100 SEAR BT-100 SEAR BT-99 (01) SEAR (06) SEAR BT-99 MAX SEAR PIN BT-99 MAX SEAR SPRING BT-100 SEAR SPRING BT-99 MAX

33 NS 46 NS * NS * 47A NS NS 62
B1331230 B1331005 B1331094 B1331095 * B1331093 B1331096 B1331080 B1331081 * B1331038 * B1331134 B1331044 * B1331053 * B1331054 * B1331020 * B1331050 * B1331121 * B1331048 * B1331118 * B1331117 * B1331049 B1331052 B0008455 B0008462 B1331105 B1331102 B1331104 B1331101 B1331103 B1331100 B1331072 B1331107 B1331106 * B1331034 * B1331131 B1331032 B1331132 B1331033 B1331067 B1331069 B1331068 * B1331028 * B1331128 B1331029 B1331129 B1331030 * B1331064 B1331065 B1331066 B1331019 B1331008 B0008199
FOREARM INSERT.410 RIGHT CLASSIC FLD & SPTG FOREARM INSERT SCREW FOREARM LEVER PIVOT PIN ALL GAUGES FOREARM LEVER SPRING ALL GAUGES FOREARM LOCKING LEVER ALL GAUGES FOREARM LOCKING LVR SPRING SCR ALL GAUGES FOREARM SCREW FRONT (7.3MM) ALL GAUGES FOREARM SCREW REAR (7.5MM) ALL GAUGES INERTIA MASS 12 GA INERTIA MASS 20, 28 &.410 INERTIA MASS RETAINING PIN ALL GAUGES LOCKING CAM ALL GAUGES LOCKING CAM SCREW ALL GAUGES LOCKING PIN BUSHING RT-LT LOCKING PIN CROSS MEMBER 12 GA LOCKING PIN CROSS MEMBER 20, 28 &.410 LOCKING PIN LEFT 12 GA LOCKING PIN LEFT 20, 28 &.410 LOCKING PIN RIGHT 20, 28 &.410 LOCKING PIN RIGHT 12 GA LOCKING PIN SCREW RT-LT ALL GAUGES RECOIL PAD CLASSIC FIELD RECOIL PAD CLASSIC SPORTING RECOIL PAD LONG COMPOSITE 12 GA RECOIL PAD LONG WOOD ALL GAUGES RECOIL PAD MEDIUM COMPOSITE 12 GA RECOIL PAD MEDIUM WOOD ALL GAUGES RECOIL PAD SHORT COMPOSITE 12 GA RECOIL PAD SHORT WOOD ALL GAUGES RECOIL PAD SCREW ALL GAUGES RECOIL PAD SPACER COMPOSITE 12 GA RECOIL PAD SPACER WOOD ALL GAUGES ROCKER LEFT & RIGHT 12 GA ROCKER LEFT & RIGHT 20, 28 &.410 ROCKER PIN 12 GA ROCKER PIN 20, 28 &.410 ROCKER PIN RETAINER ALL GAUGES SAFETY INDEX BALL ALL GAUGES SAFETY RETAINING PIN ALL GAUGES SAFETY SPRING ALL GAUGES SEAR LINK RT-LT 12 GA SEAR LINK RT-LT 20, 28 &.410 SEAR LINK SCREW RT-LT 12 SEAR LINK SCREW RT-LT 20, 28 &.410 SEAR SPRING RT-LT ALL GAUGES SELECTOR ALL GAUGES SELECTOR BUTTON ALL GAUGES SELECTOR BUTTON PIN ALL GAUGES SELECTOR POLE ALL GAUGES SIGHT CENTER BEAD SIGHT FRONT FIELD
$10.00 $1.25 $1.25 $1.25 $32.00 $1.25 $6.50 $5.75 $15.75 $15.75 $2.50 $9.25 $4.75 $4.00 $27.75 $27.75 $32.25 $32.25 $32.25 $32.25 $4.75 $23.00 $21.75 $40.25 $40.25 $40.25 $40.25 $40.25 $40.25 $2.50 $9.25 $9.25 $19.00 $19.00 $5.75 $5.75 $1.25 $1.25 $4.50 $1.25 $21.50 $21.50 $4.25 $4.25 $1.25 $9.00 $17.00 $1.25 $1.25 $5.25 $4.50

66A 75A 81 81A 84

B1331007 B1331073 B1331075 B1331074 B1331185 B1331098 B1331208 B1331159 B1331204 B1331205 B1331070 B1331071 B1331161 B1331160 B1331239 B1331209 B1331210 B1331207 B1331206 B1331200 B1331201 B1331202 B1331136 B1331189 B1331203 B1331240 B1331024 B1331127 B1331027 B1331026 B1331025 B1331126 B1331031 B1331000 B1331001 B1331018 B1331146
SIGHT FRONT FIBER OPTIC SPORTING CLAYS STOCK BOLT ALL GAUGES STOCK BOLT LOCK WASHER ALL GAUGES STOCK BOLT WASHER ALL GAUGES STOCK BOLT WASHER 12 GA COMPOSITE STOCK 12 GA COMPOSITE STOCK 12 GA FEATHER STOCK 12 GA FIELD CLASSIC GR I STOCK 12 GA FIELD CLASSIC GR III STOCK 12 GA FIELD CLASSIC GR VI STOCK 12 GA FIELD GR I STOCK 12 GA SPORTING STOCK 12 GA SPORTING A/C STOCK 12 GA SPORTING CLASSIC STOCK 12 GA SPORTING CLASSIC AC STOCK 12 GA SPORTING EURO STOCK 12 GA SPORTING EURO AC STOCK 12 GA TRAP CLASSIC AC STOCK 12 GA TRAP CLASSIC MC STOCK 20, 28 &.410 FIELD CLASSIC GR I STOCK 20, 28 &.410 FIELD CLASSIC GR III STOCK 20, 28 &.410 FIELD CLASSIC GR VI STOCK 20, 28 &.410 FIELD GR I STOCK 20, 28 &.410 SPORTING STOCK 20, 28 &.410 SPORTING CLASSIC STOCK 20, 28 &.410 SPORTING CLASSIC AC STRIKER LEFT 12 GA STRIKER LEFT 20, 28 &.410 STRIKER NUT LOCK PIN RT-LT ALL GAUGES STRIKER NUT RT-LT ALL GAUGES STRIKER RIGHT 12 GA STRIKER RIGHT 20, 28 &.410 STRIKER SPRING RT-LT 12 & 20 STRIKER STOP ALL GAUGES STRIKER STOP PIN ALL GAUGES STRIKER STOP SPRING ALL GAUGES TENSION ADJUSTMENT RETAINING SCREW ALL GAUGES TENSION ADJUSTING SCREW ALL GAUGES TOP LEVER 12 GA TOP LEVER 20, 28 &.410 TOP LEVER DISCONNECTOR 12 GA TOP LEVER DISCONNECTOR 20, 28 &.410 TOP LEVER RETAINER 12 GA TOP LEVER RETAINER 20, 28 &.410 TOP LEVER RETAINING PLUNGER ALL GAUGES TOP LEVER RETAINING SPRING ALL GAUGES TOP LEVER SPRING ALL GAUGES TOP LEVER SPRING PIN ALL GAUGES TOP LEVER SPRING STOP ALL GAUGES TOP LEVER SPRING STOP SCREW ALL GAUGES TRIGGER LINK DISCONNECT 12 GA

$33.50 $3.75 $1.25 $1.25 $1.25 $287.50 $322.00 $175.00 $586.50 $661.25 $471.50 $891.25 $805.00 $425.00 $925.00 $586.50 $1,121.25 $977.50 $603.75 $345.00 $586.50 $661.25 $471.50 $391.00 $575.00 $977.50 $33.00 $33.00 $1.25 $9.25 $33.00 $33.00 $1.75 $8.25 $2.50 $3.50 $1.25 $1.25 $75.50 $75.50 $1.75 $1.75 $12.75 $12.75 $1.50 $1.25 $5.75 $1.25 $7.00 $1.25 $3.25
B1331086 * B1331047 * B1331119 B1331062 B1331151 B1331055 B1331120 B1331061 B1331060 B1331056 B1331097 B1331057 B1331058 * B1331063

86 NS 90

* B1331122 B1331051 * B1331035 * B1331087 * B1331059 * B1331045 * B1331150 B1331046 * B1331036
TRIGGER LINK DISCONNECT 20, 28 &.410 TRIGGER LINK DISCONNECT SET SCREW R/L ALL GAUGES TRIGGER ALL GAUGES TRIGGER BASE ALL GAUGES (FOR ADJUSTABLE) TRIGGER DISCONNECTOR ALL GAUGES TRIGGER GUARD 12 GA TRIGGER GUARD 20, 28 &.410 TRIGGER GUARD SCREW ALL GAUGES TRIGGER LINK 12 GA
$3.25 $1.25 $86.25 $29.25 $15.00 $67.50 $87.50 $1.25 $29.75

NS NS NS 93

* B1331133 B1331039 B1331110 B1331109 B1331108 * B1331037 * B1331135 B1331040
TRIGGER LINK 20, 28 &.410 TRIGGER PIN ALL GAUGES TRIGGER SHOE CANTED ALL GAUGES TRIGGER SHOE OLYMPIC NARROW ALL GAUGES TRIGGER SHOE WIDE CHECKERED ALL GAUGES TRIGGER SPRING 12 GA TRIGGER SPRING 20, 28 &.410 TRIGGER STOP PIN ALL GAUGES
$29.75 $1.25 $60.50 $60.50 $60.50 $1.25 $1.25 $1.25

62 C 66A B H

K E J D F

A 61 28

32 75A 36

2 81A 60

86 91/93
10 Gauge Autoloading Shotgun

gold 10

36 36A 44 44
B1115004 B1115008 B1115323 B1115010 B1115324 B1115014 B1115016 B1115020 B1115023 B1115024 B1115028 B1115032 B1115036 B1115040 B1115325 B1115044 B1115048 B1115052 B1115055 B1115058 B1115060 B1115062 B1115065 B1115068 B1115082 B1115327 B1115080 B1115337 B1115084 B1115091 B1115096 B1115100 B1115105 B1115108 B1115116 B1115122 B1115126 B1115134 B1115130

* * * * * * * *

* B1115132 * B1221043 B1115150 B1115155 B1115247 B1115159 B1115164 B1115170 B1115174 B1115178 B1115182 * B1115190 * B1115188

$600.00 $600.00 $600.00 $600.00 $600.00 $600.00 $600.00 $600.00 $600.00 $600.00 $42.50 $42.50 $42.50 $42.50 $2.50 $2.50 $42.50 $42.50 $42.50 $42.50 $26.25 $26.25 $26.25 $26.25 $2.50 $2.50 $2.50 $2.50 $2.50 $2.50 $17.50 $20.00 $55.00 $55.00 $55.00 $55.00 $6.25 $3.75 $3.75 $3.75 $3.75 $2.50 $2.50 $27.50 $27.50
NS NS NS NS NS NS NS NS NS NS NS NS
* B1330322 * B1330323 B1333328 B1333329 * B1333320 * B1333321 * B1330320 * B1330321 B1333324 B1333325 B1330310 B1333310 B1330314 B1330315 * B1330300 * B1333300 B1330301 B1333312 B1333332 B1333386 B1333390 B1333389 * B1333R43 * B1333R42 * B1333335 * B1333R34 * B1333353 * B1333R79 * B1333374 * B1333R84 * B1330343 * B1330335 * B1330333 * B1330334 * B1330369 * B1330379 * B1333R56 * B1333355 * B1333R54 * B1333330
SEAR LEFT MT 12 GA SEAR LEFT MT 20 GA SEAR PIN 12 GA SEAR PIN 20-28-.410 SEAR RIGHT IT 12 GA SEAR RIGHT IT 20-28-.410 SEAR RIGHT MT 12 GA SEAR RIGHT MT 20 GA SEAR SPRING 12 GA SEAR SPRING 20-28-.410 SELECTOR BLOCK 12-20 GA MT SELECTOR BLOCK 12-20-28-.410 IT SELECTOR BLOCK SPRING 12-20 GA MT SELECTOR BLOCK SPRING FOLLOWER 12-20 GA MT SELECTOR SAFETY 12-20 GA MT SELECTOR SAFETY 12-20-28-410 IT SELECTOR SAFETY SPRING RETAINING PIN 12-20 GA MT SELECTOR SPRING 12-20-28-.410 SIGHT BEAD 12-20-28-.410 STOCK BOLT 12-20-28-.410 STOCK BOLT LOCK WASHER 12-20-28-.410 STOCK BOLT WASHER 12-20-28-.410 STOCK 12 GA IT FIELD U TYPE INLETTING RKST (UNFINISHED) STOCK 12 GA IT FIELD Y TYPE INLETTING RKLT (UNFINISHED) STOCK 12 GA IT FIELD U TYPE INLETTING FKST MAGNUM STOCK 12 GA IT SKEET U TYPE INLETTING FKST (UNFINISHED) STOCK 12 GA IT SUPERLIGHT U TYPE INLETTING STOCK 12 GA IT TRAP U TYPE INLETTING, FKST W/ PAD (UNFINISHED) STOCK 12 GA IT TRAP Y TYPE INLETTING FKLT W/ PAD STOCK 12 GA IT TRAP Y TYPE INLETTING FKLT W/ PAD (UNFINISHED) STOCK 12 GA MT FIELD U TYPE INLETTING FKLT STOCK 12 GA MT FIELD U TYPE INLETTING FKLT MAGNUM STOCK 12 GA MT SKEET U TYPE INLETTING FKLT W/ PAD STOCK 12 GA MT SKEET U TYPE INLETTING FKLT W/O PAD STOCK 12 GA MT TRAP U TYPE INLETTING FKLT W/ PAD STOCK 12 GA MT TRAP U TYPE INLETTING FKLT W/O PAD STOCK 20-28-.410 IT FIELD U TYPE INLETTING RKST (UNFINISHED) STOCK 20-28-.410 IT FIELD Y TYPE INLETTING FKLT STOCK 20-28-.410 IT SKEET U TYPE INLETTING FKST (UNFINISHED) STOCK 20-28-.410 IT SUPERLIGHT U TYPE INLETTING
$27.50 $27.50 $2.50 $2.50 $27.50 $27.50 $27.50 $27.50 $2.50 $2.50 $10.00 $10.00 $2.50 $2.50 $67.50 $67.50 $2.50 $5.00 $5.00 $11.25 $2.50 $3.75 $800.00 $800.00 $800.00 $800.00 $800.00 $800.00 $800.00 $800.00 $800.00 $800.00 $800.00 $800.00 $800.00 $800.00 $800.00 $800.00 $800.00 $800.00
* B1330356 * B1330352 * B1330354 * B1333392 * B1333401 * B1333414 * B1333423 B1333432 B1333433 B1333434 B1333410 B1333411 B1333436 B1333437 B1330436 B1330437 B1333440 B1333438 * B1333442 * B1333449 B1333468 B1333469 B1333472 B1333460 B1333463
STOCK 20-28-410 MT FIELD U TYPE INLETTING FKLT STOCK 20-28-410 MT SKEET U TYPE INLETTING FKLT W/ PAD STOCK 20-28-410 MT SKEET U TYPE INLETTING FKLT W/O PAD TAKEDOWN LEVER 12 GA TAKEDOWN LEVER 20-28-410 TAKEDOWN LEVER LATCH 12 GA TAKEDOWN LEVER LATCH 20-28-410 TAKEDOWN LEVER LATCH PIN 12 GA TAKEDOWN LEVER LATCH PIN 20-28-410 TAKEDOWN LEVER LATCH SPRING 12-20-28-410 TAKEDOWN LEVER PIN 12 GA TAKEDOWN LEVER PIN 20-28-410 TANG PIECE IT 12 GA TANG PIECE IT 20-28-410 TANG PIECE MT 12 GA TANG PIECE MT 20 GA TANG PIECE SCREW BOTTOM 12-20-28-410 TANG PIECE SCREW TOP 12-20-28-410 TOP LEVER (ROUGH) 12 GA TOP LEVER (ROUGH) 20-28-410 TOP LEVER DOG 12 GA TOP LEVER DOG 20-28-410 TOP LEVER DOG SCREW 12-20-28-410 TOP LEVER SPRING 12-20-28-410 TOP LEVER SPRING RETAINER 12-20-28-410

$800.00 $800.00 $800.00 $42.50 $42.50 $26.25 $26.25 $2.50 $2.50 $2.50 $2.50 $2.50 $55.00 $55.00 $55.00 $55.00 $2.50 $2.50 $90.00 $90.00 $26.25 $26.25 $2.50 $3.75 $6.25

96 NS NS 110 * * * * *

B1333466 B1333522 B1333501 B1333519 B1333520 B1330501
* B1330522 * B1333535 * B1333533 * B1333534 * * * * B1333476 B1333481 B1330476 B1330481 B1333488 B1333489 B1330492 B1333492 B1330493 B1333494 B1333496 B1333498 B1330496 B1330482
TOP LEVER SPRING RETAINER SCREW 12-20-28-410 TRIGGER GUARD IT SHORT TYPE 20-28-410 TRIGGER GUARD IT SHORT TYPE, 12 GA TRIGGER GUARD IT SUPERLIGHT 12 GA TRIGGER GUARD IT SUPERLIGHT 20 GA TRIGGER GUARD MT LONG TYPE 12 GA (MUST BE MODIFIED TO FIT IT GUN) TRIGGER GUARD MT LONG TYPE, 20 GA MT (MUST BE MODIFIED TO FIT IT GUN) TRIGGER GUARD SCREW ESCUTCHEON TRIGGER GUARD SCREW, MACHINE TYPE FRONT TRIGGER GUARD SCREW, MACHINE TYPE REAR TRIGGER IT (GOLD PLATED) 12 GA TRIGGER IT (GOLD PLATED) 20-28-410 TRIGGER MT (GOLD PLATED) 12 GA TRIGGER MT (GOLD PLATED) 20 GA TRIGGER PIN 12 GA TRIGGER PIN 20-28-410 TRIGGER PISTON 12-20 MT TRIGGER PISTON 12-20-28-410 TRIGGER PISTON PIN, 12-20 MT TRIGGER PISTON PIN, 12-20-28-410 TRIGGER PISTON SPRING IT 12 GA TRIGGER PISTON SPRING IT 20-28-410 TRIGGER PISTON SPRING MT 12-20 GA TRIGGER SPRING 12-20 GA MT
$2.50 $181.25 $181.25 $181.25 $181.25 $181.25 $181.25 $2.50 $3.75 $3.75 $71.25 $71.25 $71.25 $71.25 $2.50 $2.50 $7.50 $7.50 $2.50 $2.50 $2.50 $2.50 $2.50 $2.50
Over and Under Shotgun Inertia Trigger

37a 19 22

103 88
Over and Under Shotgun Mechanical Trigger
Bolt-Action Rifle A-Bolt and A-Bolt II

a-bolt

B3578100 B3578528 B3578101 B3578A29 B3578103 B3578038 B3578104 B3578529 B3578107 B3578929 B3578105 B357803805 B3578A28 B357806503 B357804603 B357804703 *+ B357804604 *+ B357804704 *+ B357804804 *+ B3578987 *+ B357801403 *+ B3578918 *+ B3578401 *+ B3578500 *+ B3578961 *+ B357801603 * B3578900 *+ B357800406 *+ B3578888 *+ B3578887 *+ B3578893 *+ B357802703 *+ B3578899 *+ B357805104
BARREL MOUNTING SCREW L/A HUNTER/ MEDALLION (02) BARREL MOUNTING SCREW L/A HUNTER/ MEDALLION PRE 02 BARREL MOUNTING SCREW L/A STAINLESS (02) BARREL MOUNTING SCREW L/A STAINLESS PRE 02 BARREL MOUNTING SCREW L/A WHITE GOLD MEDALLION (02) BARREL MOUNTING SCREW L/A WHITE GOLD MEDALLION PRE 02 BARREL MOUNTING SCREW S/A HUNTER/ MEDALLION (02) BARREL MOUNTING SCREW S/A HUNTER/ MEDALLION PRE 02 BARREL MOUNTING SCREW S/A MICRO HUNTER/MEDALLION (02) BARREL MOUNTING SCREW S/A MICRO HUNTER/MEDALLION PRE 02 BARREL MOUNTING SCREW S/A STAINLESS (02) BARREL MOUNTING SCREW S/A STAINLESS ECLIPSE (05) BARREL MOUNTING SCREW S/A STAINLESS PRE 02 BARREL MOUNTING SCREW WSM WHITE GOLD MEDALLION (03) BARREL MOUNTING SCREW WSSM HUNTER/ MEDALLION (03) BARREL MOUNTING SCREW WSSM STAINLESS (03) BBL/REC A-BOLT.204 RUGER HUNTER BBL/REC A-BOLT.204 RUGER MEDALLION BBL/REC A-BOLT.204 RUGER VARMINT STALKER BBL/REC A-BOLT.22 HORNET MICRO HUNTER BBL/REC A-BOLT.22 HORNET MICRO HUNTER LH (03) BBL/REC A-BOLT.22 HORNET MICRO MEDALLION BBL/REC A-BOLT.22-250 REM HUNTER BBL/REC A-BOLT.22-250 REM MEDALLION BBL/REC A-BOLT.22-250 REM MICRO HUNTER BBL/REC A-BOLT.22-250 REM MICRO HUNTER LH (03) BBL/REC A-BOLT.22-250 REM MICRO MEDALLION BBL/REC A-BOLT.22-250 REM STAINLESS M-1000 BBL/REC A-BOLT.22-250 REM STAINLESS STALKER BBL/REC A-BOLT.22-250 REM STAINLESS STALKER LH BBL/REC A-BOLT.22-250 REM VARMINT HUNTER W/BOSS BBL/REC A-BOLT.22-250 REM VARMINT STALKER (03) BBL/REC A-BOLT.22-250 REM VARMINT W/ BOSS BBL/REC A-BOLT.223 REM SSA HUNTER

$625.00 $600.00 $625.00 $625.00 $625.00 $600.00 $550.00 $1,300.00 $700.00 $900.00 $725.00 $650.00 $775.00 $500.00 $525.00 $550.00 $850.00 $600.00 $625.00 $550.00 $550.00 $600.00 $625.00 $250.00 $250.00 $250.00 $250.00 $250.00 $250.00 $250.00 $250.00 $250.00 $250.00 $250.00 $250.00 $250.00 $250.00 $250.00
$650.$1,300.$750.00 $825.00 $1,025.00 $650.00 $800.00 $600.00 $725.00 $825.00 $500.00 $525.00 $525.00 $600.00 $625.00 $750.00 $500.00 $600.00 $525.00 $525.00 $600.00 $500.00 $1,300.00 $600.00 $625.00 $625.00 $650.3

NS 5 5

* B3578554 * B357884L * B3578556 * B3578557 * B3578543 * B3578542 * B3578584 * B3578585 * B3578330 * B3578331 * B3578332 * * * * * * B357806303 B3578532 B3578408 B357832L B3578409 B3578A32
* B3578071 * B3578533 * B3578414 * B3578531 * * * * * * * * * * * * * * * * * * * * * * B3578410 B357804903 B357800404 B357800205 B357803803 B357800505 B357800905 B357800704 B3578575 B3578423 B3578417 B3578418 B3578422 B3578419 B3578420 B3578538 B357803204 B357801804 B3578536 B357836L B357805203 B3578A36 B3578073

* B3578028

BOLT ASSEMBLY L/A STD CALIBER MEDALLION BOLT ASSEMBLY L/A STD CALIBER MEDALLION LH BOLT ASSEMBLY L/A STD CALIBER STAINLESS STALKER BOLT ASSEMBLY L/A STD CALIBER STAINLESS STALKER LH BOLT ASSEMBLY S/A STD CALIBER HUNTER BOLT ASSEMBLY S/A STD CALIBER MEDALLION & MICRO MEDALLION BOLT ASSEMBLY S/A STD CALIBER STAINLESS STALKER 243 BOLT ASSEMBLY S/A STD CALIBER STAINLESS STALKER BOLT ASSEMBLY WSM HUNTER (02) BOLT ASSEMBLY WSM MEDALLION (02) BOLT ASSEMBLY WSM STAINLESS STALKER (02) BOLT ASSEMBLY WSSM HUNTER (03) BOLT BODY L/A (PRE 93) BOLT BODY L/A II (93) BOLT BODY L/A LH (PRE 93) BOLT BODY L/A LH II (93) BOLT BODY L/A STAINLESS STALKER (PRE 93) BOLT BODY L/A STAINLESS STALKER LH (PRE 93) BOLT BODY SHORT ACTION (PRE 93) BOLT BODY SHORT ACTION II (93) BOLT BODY SHORT ACTION.223 REM (PRE 93) BOLT BODY SHORT ACTION LH II (93) BOLT BODY WSM MICRO HUNTER LH (03) BOLT BODY WSM MOUNTAIN Ti BOLT BODY WSSM MOUNTAIN Ti BOLT BODY WSSM (03) BOLT BODY WSSM HUNTER LH BOLT BODY WSSM MEDALLION LH BOLT BODY PIN MOUNTAIN Ti WSM BOLT HANDLE EURO (PRE 93) BOLT HANDLE EURO (93) BOLT HANDLE HUNTER (93) BOLT HANDLE MEDALLION (93) BOLT HANDLE MEDALLION LH (PRE 93) BOLT HANDLE STAINLESS STALKER (93) BOLT HANDLE STAINLESS STALKER (93) LH BOLT HANDLE HUNTER (PRE 93) BOLT HANDLE M-1000 ECLIPSE WSM BOLT HANDLE M-1000 ECLIPSE WSM STAINLESS BOLT HANDLE MEDALLION (PRE 93) BOLT HANDLE MEDALLION LH (PRE 93) BOLT HANDLE MICRO HUNTER WSM LH (03) BOLT HANDLE STAINLESS STALKER (PRE 93) BOLT HANDLE STAINLESS STALKER LH (PRE 93) BOLT HANDLE WHITE GOLD MEDALLION (93)

BOLT SHROUD M-1000 ECLIPSE WSM BOLT SHROUD M-1000 ECLIPSE WSM STAINLESS BOLT SHROUD MEDALLION BOLT SHROUD STAINLESS STALKER BOLT SHROUD WHITE GOLD MEDALLION BOLT SLEEVE.22 HORNET MICRO HUNTER (93) BOLT SLEEVE.22 HORNET MICRO HUNTER LH (03) BOLT SLEEVE.223 REM MICRO HUNTER LH (03) BOLT SLEEVE.223 REM MICRO MEDALLION (93) BOLT SLEEVE.223 REM SSA (04) BOLT SLEEVE L/A (93) BOLT SLEEVE L/A LH (93) BOLT SLEEVE S/A (93) BOLT SLEEVE S/A LH (93) BOLT SLEEVE S/A MICRO HUNTER LH BOLT SLEEVE WSM BOLT SLEEVE WSM LH BOLT SLEEVE WSM MICRO HUNTER LH (03) BOLT SLEEVE WSM MOUNTAIN Ti BOLT SLEEVE WSSM (03) BOLT SLEEVE WSSM MOUNTAIN Ti BOLT SLEEVE WSSM HUNTER LH BOLT SLEEVE WSSM MEDALLION LH BOLT SLEEVE INSERT MOUNTAIN Ti WSM BOLT SLEEVE PIN WSSM MOUNTAIN Ti BUTT PLATE BUTT PLATE SCREW EJECTOR EJECTOR.22 HORNET MICRO (93) EJECTOR.22 HORNET MICRO LH (93) EJECTOR.223 REM EJECTOR WSSM (03) EJECTOR PIN EJECTOR SPRING EJECTOR SPRING.22 HORNET (93) EXTRACTOR.22 HORNET (93) EXTRACTOR.223 REM EXTRACTOR EXTRACTOR PIN.22 HORNET (93) EXTRACTOR SPRING.22 HORNET (93) EXTRACTOR SPRING.223 REM EXTRACTOR SPRING MAG (98) EXTRACTOR SPRING STD CALIBERS L/A & S/A (98) EXTRACTOR SPRING SCREW 22 HORNET (93) FEED RAMP.22 HORNET FEED RAMP PIN.22 HORNET FEED RAMP SPRING.22 HORNET FIRING PIN L/A (PRE 93) FIRING PIN L/A II (93) FIRING PIN S/A (PRE 93)
$27.75 $37.50 $22.25 $22.25 $22.50 $53.25 $72.50 $70.00 $46.00 $69.00 $45.00 $45.00 $43.00 $49.00 $59.00 $63.25 $63.25 $67.50 $103.50 $72.50 $50.50 $59.00 $57.50 $0.00 $1.25 $4.50 $2.50 $2.25 $2.75 $4.25 $2.50 $3.50 $2.25 $2.25 $1.00 $8.00 $13.75 $11.50 $1.00 $1.25 $1.75 $1.75 $1.75 $2.75 $2.25 $1.00 $1.25 $14.50 $19.00 $16.00
25 NS NS NS NS NS NS NS NS NS NS 29
* B3578460 * B357804003 B3578622 B3578626 B3578461 B3578625 B3578462 B357804103 B3578629 B3578922 B3578593 B3578591 B3578592 B3578A91 B3578988 B3578A41 B3578989 B3578940 B3578948 B3578949 B357806204 B357806104 B357806304 B3578960 B3578716 B3578715 B3578721 B3578030 B3578717 B3578720 B357804803 B3578722 B3578050 B357803004 B357801604 B3578052 B3578051 B357803804 B357804403 B357804303 B357805704 B357804503
FIRING PIN S/A (93) FIRING PIN WSSM (03) FIRING PIN SEAR PIN FIRING PIN SPRING L/A (PRE 93) FIRING PIN SPRING L/A (93) FIRING PIN SPRING S/A (PRE 93) FIRING PIN SPRING S/A (93) FIRING PIN SPRING WSSM (03) FIRING PIN WASHER FRICTION SPRING.22 HORNET GAS STOP ASSEMBLY 223 REM (PRE 93) GAS STOP ASSEMBLY L/A (PRE 93) GAS STOP ASSEMBLY S/A (PRE 93) GAS STOP ASSEMBLY STAINLESS STALKER (PRE 93) GRIP CAP CUSTOM TROPHY GRIP CAP SCREW COMPOSITE STOCK GRIP CAP SCREW CUSTOM TROPHY MAGAZINE BLOCK PIN 22 HORNET MAGAZINE CLIP 22 HORNET MAGAZINE FLOORPLATE.22 HORNET MAGAZINE FLOORPLATE.223 REM SSA HUNTER MAGAZINE FLOORPLATE.223 REM SSA MEDALLION MAGAZINE FLOORPLATE.223 REM SSA STAINLESS STALKER MAGAZINE FLOOR PLATE CUSTOM TROPHY MAGAZINE FLOORPLATE L/A HUNTER 01) MAGAZINE FLOORPLATE L/A MEDALLION (90) MAGAZINE FLOORPLATE L/A STAINLESS STALKER (90) MAGAZINE FLOOR PLATE L/A WHITE GOLD MEDALLION MAGAZINE FLOORPLATE S/A HUNTER(90) MAGAZINE FLOOR PLATE S/A MEDALLION (90) MAGAZINE FLOORPLATE S/A MICRO HUNTER MAGAZINE FLOORPLATE S/A STAINLESS STALKER (95) MAGAZINE FLOOR PLATE WSM HUNTER (01) MAGAZINE FLOORPLATE WSM M-1000 ECLIPSE MAGAZINE FLOORPLATE WSM M-1000 ECLIPSE STAINLESS MAGAZINE FLOOR PLATE WSM MEDALLION MAGAZINE FLOORPLATE WSM STAINLESS MAGAZINE FLOOR PLATE WSM WHITE GOLD MEDALLION MAGAZINE FLOORPLATE WSSM HUNTER (03) MAGAZINE FLOORPLATE WSSM MEDALLION (03) MAGAZINE FLOORPLATE WSSM STAINLESS VARMINT LAMINATE MAGAZINE FLOORPLATE WSSM STAINLESS (03)

$20.75 $3.75 $19.25 $455.00 $455.00 $455.00 $455.00 $455.00 $455.00 $455.00 $455.00 $101.00 $100.00 $5.00 $87.50 $87.50 $1.25 $2.25 $3.75 $1.25 $8.50 $12.50 $2.25 $1.25 $2.25 $3.75 $2.50 $1.25 $8.50 $1.25 $1.25 $189.50 $189.50 $13.25 $3.75 $1.25 $61.00 $1.25 $19.25 $8.50 $8.50 $8.50 $8.50 $8.50 $8.50 $8.50 $8.50 $2.25 $17.75 $2.25 $36.00 $61.00
NS NS 52 NS 65 65A 65A 71 72
B3176165 B3176166 B3176168 B3176169 B3176167 B3176182 B3176180 B317618401 B3176186 B3176202 B317689201 B317688801 B317689001 B3176210 B3176208 B3176218 B3176222 B317683601 B3176224 B317622802 B317623201 B317623601 B317623801 + B3176246 + B3176239 BST647001 B317687001 B3176262 B3176254 B3176258 B317686801 B3176264 B3176266 B3176282 B3176281 B3176271 B3176270 B3176277 BST1423602 B317628402 B317628602 * B3176077 * B3176071 B317629413 BST1435001 BST1435801 B3176304 BST7631002 BST7631102 B3176314 B317631612
MAGAZINE COMPLETE 270-30-06 MAGAZINE COMPLETE 280 REM MAGAZINE COMPLETE 300 WIN MAG MAGAZINE COMPLETE 338 WIN MAG MAGAZINE COMPLETE 7MM REM MAG MAGAZINE FLOORPLATE - MAGNUM CALIBERS MAGAZINE FLOORPLATE - STD MAGAZINE FLOORPLATE RETAINER PIN ALL & BPR MAGAZINE FLOORPLATE SPRING MAGAZINE LATCH MAGAZINE LATCH SPN PLUNGER BAR ALL & BPR MAGAZINE LATCH SPRING BAR ALL & BPR MAGAZINE LATCH STOP PIN MAGAZINE RETAINING SPR PIN MAGAZINE RETAINING SPRING MAINSPRING GUIDE RT OR LT MAINSPRING GUIDE SUPPORT MAINSPRING RIGHT OR LEFT MAINSPRING SUPPORT OPERATING HANDLE BAR ALL OPERATING HANDLE LOCK BAR ALL OPERATING HANDLE LOCK PIN BAR ALL OPERATING HANDLE LOCK SPN BAR ALL RECEIVER MAGNUM CALIBERS TYPE II RECEIVER STANDARD CALIBERS TYPE II RECOIL PAD SAFETY SPN RET PIN II LWT & BPR SAFETY CROSS BOLT (79) R&L SAFETY CROSS BOLT PRE-1979 (OBSOLETE) SAFETY PLUNGER SAFETY SPRING SEAR SEAR PIN SIGHT ASSY REAR WILLIAMS MAG SIGHT ASSY REAR WILLIAMS STD (OBSOLETE) SIGHT BEAD FRONT WILLIAMS TY SIGHT BEAD FRONT PRE 1979 (OBSOLETE) SIGHT RAMP FRONT WILLIAMS STYLE SLING EYE REAR BAR ALL & BPR SLING EYELET FRONT BAR ALL SLING EYELET WASH FRONT BAR BUTTSTOCK MAGNUM GRADE I TYPE II BUTTSTOCK STANDARD GRADE I TYPE II BUTTSTOCK BOLT PLATE I & II BUTTSTOCK BOLT TYPE II STOCK BOLT WASHER SUPPORT RAIL RIGHT OR LEFT TELESCOPE MT FILL SCREW BLUE TELESCOPE MT FILL SCREW NICKEL TIMING LATCH BAR I & II TIMING LATCH RET PIN BAR & BPR

60 60A NS 67

*+ *+ *+ *+
U3177065F4 B3177333AN B317623201 B317623601 B317623801 B3177058AT B3177301AV B3177122AT B3177300AV B3177099AA B3177098AA BST77118AJ B3177087AA B317600602 B3177037AP B3177097AJ B3177159E2 B3177071AK B3177169FH B3177170AE B317687001 B317681803 B3177120AJ B3177000AJ B3177124AX B3177051AX
OPERATING HANDLE LH OPERATING HANDLE STALKER OPERATING HANDLE STOP OPERATING HANDLE STOP PIN OPERATING HANDLE STOP SPRING RECEIVER LT RECEIVER LT LH RECEIVER ST RECEIVER ST LH RECOIL PAD LT RECOIL PAD ST RECOIL PAD SCREW RECOIL PAD SPACER RECOIL SPRING RECOIL SPRING GUIDE RECOIL SPRING GUIDE RETAINING SCREW RECOIL SPRING GUIDE STOP PIN SAFETY SAFETY PLUNGER SAFETY PLUNGER SPRING SAFETY SPRING RETAINER PIN SEAR SLIDE BAR LT SLIDE BAR ST SLIDE LT SLIDE ST
$24.00 $21.75 $2.50 $2.50 $1.25 $393.75 $600.00 $393.75 $600.00 $13.25 $13.25 $2.50 $3.75 $3.75 $9.75 $1.25 $1.25 $2.50 $3.75 $1.25 $1.25 $6.00 $23.00 $12.00 $23.00 $23.00
67A 67A 67A 67A NS 72A 72B 72B 79

*** * * *

B3177292EP B3177291AE B3177074EK B3177141EK B3177052AA B3177054AA B3177056AA B3177053AA B3177055AA B3177057AA BST1435001 BST1435401 BST1435801 BST7631002 B327911512
* B327906002 B317631612 B3177347AJ * B3177043AA B317681302 * B3177038AA B327915601 B317687802 B317688201 B317682601
STOCK LT/ST MONBU (NO PAD OR SPACER) STOCK LT/ST STALKER (NO PAD OR SPACER) STOCK L/T (NO PAD OR SPACER) STOCK S/T (NO PAD OR SPACER) STOCK SPACER 1 No 1 STOCK SPACER 1 No 2 STOCK SPACER 1 No 3 STOCK SPACER 2 No 1 STOCK SPACER 2 No 2 STOCK SPACER 2 No 3 STOCK BOLT STOCK BOLT LOCK WASHER STOCK BOLT WASHER TELESCOPE MOUNT FILLER SCREW TELESCOPE MOUNT SCREW RECEIVER INSERT TIMING LATCH TIMING LATCH PIN TIMING LATCH PIN LH TRIGGER TRIGGER & SEAR PIN TRIGGER GUARD TRIGGER GUARD DAMPER (BUFFER) TRIGGER GUARD RETAINING PIN TRIGGER GUARD RETAINING PIN SPRING TRIGGER SEAR SPRING
$120.00 $90.00 $111.75 $111.75 $2.50 $2.50 $2.50 $2.50 $2.50 $2.50 $2.50 $1.25 $2.50 $1.25 $1.25 $3.75 $1.25 $3.75 $3.75 $1.25 $13.25 $1.25 $2.50 $1.25 $2.50
12 See note below 72 60A 72B 4 72A 44B 44A 2
Lever-Action Rifle BLR Lightning Short and Long Action, Lightweight '81 Short and Long Action, WSM and Takedown

$1.25 $1.50 $14.75 $2.00 $1.00 $2.00 $1.25 $3.00 $6.75 $40.50 $2.00 $25.00 $82.50 $9.50 $22.00 $18.00 $18.00 $18.00 $1.25 $16.50 $1.50 $268.00 $222.75 $264.00 $286.00 $268.00 $220.00 $2.50 $1.50 $1.50 $55.00 $55.00 $55.00 $1.50 $2.00 $20.50 $2.00 $1.25 $27.50 $1.50
NOTE! FOR SERVICE AND PARTS SALES ON GUNS 1992 AND OLDER (STEEL RECEIVER) EXCLUSIVE SALES AND REPAIR SERVICE: MIDWEST GUN WORKS 1101 MASON CIRCLE DRIVE SOUTH, PEVELY, MO 63070 PHONE 636- 475-7300 WWW.MIDWESTGUNWORKS.COM

30A 37

58A 60 82

Pump-Action Rifle

NS 20 NS 23 NS NS NS 40 41
B327933603 B327931603 B327934603 B327932602 B327939603 B327941603 B327901801 B327916802 B317604814 B317604514 B327904501 B327905502 B327905002 B317607601 B317687203 B317687412 B317682601 BST7609002 BST7609601 B317609901 B3176103A1 B317610501 B317611001 B317611402 B317611701 B327926604 B327925401 B327925002 B327903801 B327903402 B327926202 B327925201 B327925602 B327901602 B327901402 B327915802 B327916002 B327916201 B327916402 B317674513 B317618401 B317671301 B317688701 B317689001 B317688801 B317689201 B317620801 B317671001 B317683601 B317683801 B327917002
BARREL 22" W/O SIGHTS 243W BPR BARREL 22" W/O SIGHTS 270W BPR BARREL 22" W/O SIGHTS 30-06 SPRING BPR BARREL 22" W/O SIGHTS 308W BPR BARREL 24" W/O SIGHTS 300W MAG BPR BARREL 24" W/O SIGHTS 7MM MAG BPR BARREL BUFFER BPR BEARING ROD WASHER BPR BOLT MAG CALIBERS BAR ALL & BPR BOLT STD CALIBERS BAR ALL & BPR BOLT COVER BPR BOLT SLEEVE MAG CALIBER BPR BOLT SLEEVE STD CALIBER BPR CAM PIN BAR ALL & BPR DISCONNECTOR BAR II LWT & BPR DISCONNECTOR PIN BAR II LWT & BPR DISCONNECTOR SPRING BAR II LWT & BPR EJECTOR BAR ALL & BPR EJECTOR RETAINING PIN BAR ALL & BPR EJECTOR SPRING BAR ALL & BPR EXTRACTOR BAR ALL & BPR EXTRACTOR SPRING BAR ALL & BPR FIRING PIN BAR ALL & BPR FIRING PIN RETAINING PIN BAR ALL & BPR FIRING PIN SPRING BAR ALL & BPR FOREARM BPR STD & MAG FOREARM FELT (2) BPR FOREARM FIXING SCREW BPR FOREARM GUIDE BPR FOREARM GUIDE SUPPORT BPR FOREARM RUDDER PINTLE FOREARM SCREW RUBBER SLEEVE FOREARM SPACER BPR FOREARM SUPPORT BPR FOREARM SUPPORT PIN BPR HAMMER BPR HAMMER PIN BPR HAMMER PIN RETURN SPRING HAMMER PIN RING STOP BPR MAGAZINE FLOORPLATE ALL CALIBERS BAR II MAGAZINE FLOORPLATE PIVOT PIN BAR ALL & BPR MAGAZINE FLOORPLATE SPRING BAR II LWT & BPR MAGAZINE LATCH BAR II LWT & BPR MAGAZINE LATCH PIN BAR II LWT & BPR MAGAZINE LATCH SPRING BAR ALL & BPR MAGAZINE LATCH SPRING PLUNGER BAR ALL & BPR MAGAZINE RETAINING SPRING BAR II LWT & BPR MAGAZINE RETAINING SPRING PIN BAR II LWT & BPR MAINSPRING BAR II LWT & BPR MAINSPRING GUIDE RT OR LT BAR II LWT & BPR MAINSPRING GUIDE SUPPORT BPR
$607.25 $607.25 $607.25 $607.25 $607.25 $607.25 $1.25 $2.50 $101.00 $100.00 $3.75 $51.75 $53.00 $8.50 $2.50 $2.50 $2.50 $3.75 $2.50 $1.25 $8.50 $1.25 $13.25 $3.75 $1.25 $123.75 $2.50 $11.00 $3.75 $3.75 $2.50 $1.25 $3.75 $7.25 $1.25 $9.75 $3.75 $2.50 $1.25 $15.75 $1.25 $1.25 $2.50 $1.25 $1.25 $1.25 $1.25 $2.50 $2.50 $2.50 $6.00

**** **** **** **** **** **** **** **** **** **** **** **** **** **** **** **** **** **** **** **** **** **** **** **** **** * * * * * *
B3474685 B3474684 B3474683 B3474682 B3474623 B34746.22 B3474631 B3474626 B3474627 B3474621 B3474629 B3474630 B3474681 B3474680 B3474678 B3474677 B3474688 B3474696 B3474693 B3474690 B3474689 B3474694 B3474691 B3474695 B3474692 B3474880 B3474650 B3474649 B3474648 B3474652 B3474939
SIGHT BPCR DISC #70 SIGHT BPCR ELEVATOR REAR BPCR SIGHT BPCR ELV SC LOCK COLLAR SIGHT BPCR ELV SCREW ASY BPCR SIGHT BPCR FRONT ADJ BASE SIGHT BPCR FRONT ADJ BASE SPRING SIGHT BPCR FRONT ADJ BPCR COMPLETE SIGHT BPCR FRONT ADJ LOCK COLLAR SIGHT BPCR FRONT ADJ SGT BODY & TUBE SIGHT BPCR FRONT ADJ THREAD BOSS SIGHT BPCR FRONT ADJ WIND SCREW & KNOB SIGHT BPCR FRONT ADJ WING LOCK KNOB SIGHT BPCR FRT SPIRIT TUBE CAP SIGHT BPCR FRT SPRT LEVEL VIAL SIGHT BPCR INSERT CARD FRT SIGHT BPCR NUT FRONT SIGHT BPCR REAR LADDER ASY SIGHT BPCR WIND BASE MT SCREW SIGHT BPCR WIND BASE REAR SIGHT BPCR WIND LOCK KNOB SIGHT BPCR WIND LOCK KNOB SCREW SIGHT BPCR WIND SCREW REAR SIGHT BPCR WIND SPRING WASH SIGHT BPCR WINDAGE BASE SPRING STD SIGHT BPCR WINDAGE BBL SPRING SIGHT FRONT.45-70 SIGHT FT TRAD.30-30 (53W) SIGHT FT TRAD.38-55 (.45W) SIGHT FT TRAD.45-70 (41W) SIGHT REAR TRADITIONAL SIGHT REAR.357 MAG TRAD LW
$28.00 $15.75 $15.75 $15.75 $34.75 $34.75

58 NS 59 NS 64 65

* B3474940 * B3474941 * B3474881 B3474945 B3474882 B3474655 B3474656 *** B3474608 * * * * B3474886 B3474887 B3474980 B3474632 B3474895 B3474893 B3474896 B3474897 * B3474901 * B3474903 B3474933 B3474934 B3474938 B3474907 B3474923 B3474908 B3474909 B3474912
SIGHT REAR.44 MAG TRAD LW SIGHT REAR.45 COLT TRAD LW SIGHT REAR.45-70 SIGHT REAR STEP.454 CASULL SIGHT REAR STEP.45-70 SIGHT REAR STEP TRAD.30-30 &.45-70 SIGHT REAR STEP TRAD.38-55 4.6MM STOCK 125TH ANN (OIL) (03) (FACTORY REPLACEMENT ONLY) STOCK 1885 STOCK BPCR STOCK LOW WALL STOCK TRADITIONAL STOCK BOLT SPR WASHER STOCK BOLT LONG STOCK BOLT WASHER STOCK EYELET TRIGGER 1885 TRIGGER BPCR TRIGGER HOUSING 1885 TRIGGER HOUSING BPCR TRIGGER HOUSING PIN TRIGGER PIN/SEAR PIN TRIGGER PULL ADJ SCREW TRIGGER SEAR MODEL TRIGGER SEAR PIN TRIGGER SPRING