Quick Setup Guide HD-CELU2 DriveStation FlexNet

Package Contents:

DriveStation USB Cable Ethernet Cable Power Adaptor DriveNavigator Installation CD Quick Setup Guide (this manual) Warranty Card

www.buffalotech.com

Front Panel Layout

Power/Access LED

Mode Button/LED Red - USB mode Green - LAN mode
Note: The DriveStation FlexNet can be connected to a computer as both an Ethernet NAS and a USB external hard drive at the same time. To switch between the two modes, press the mode button.

Back Panel Layout

Power button Reset button Ethernet (to router) USB (to PC) Power
Installing Your DriveStation
Insert the installation CD into your PCs CDROM drive. Setup will automatically launch. Click on Begin Installation.

Click Install.

The wizard will guide you through installation. First, youll install the DriveStation FlexNet as a USB device. Then, youll switch modes and install the DriveStation FlexNet in LAN mode as a NAS device. Follow the directions on each screen and continue pressing Next to step through the installation.
When installation is complete, you may close the installation window.
Congratulations! Your DriveStation is ready to use. Turn to page 6 for instructions on DriveStation as a networked LAN drive, or page 7 for instructions on using it as a USB drive. Please see the User Manual on your DriveStation CD for more help and configuration options.
Transmission Speed: Hard Drives: Ethernet Connector: USB Connector: Power Supply: Client OS Support: Power Consumption: Dimensions: Weight: Operating Environment:
10/100 Mbps (Ethernet); 480 Mbps (USB)
3.5 SATA RJ-45 USB 2.0 100-240V 50/60Hz Windows 2000, XP, Vista Max 24W, Average 17W 6.1 x 6.9 x 1.ounces (1 kg) 41- 95 F; 20 - 80% noncondensing
Using your DriveStation in LAN Mode
In LAN mode, the mode button will glow green. If its red, press it. The LED will change to green. To use the DriveStation in LAN mode, it should be connected to a router on your network via an Ethernet cable.
After running the installation wizard, this icon will be on your desktop: BrowseHD-CEL.
In LAN mode, clicking BrowseHD-CEL takes you directly to the main folder on your DriveStation FlexNet.
Using your DriveStation in USB Mode
In USB mode, the mode button will glow red. If its green, press it. The LED will change to red. To use the DriveStation in USB mode, it must be connected to your computer with a USB cable.
In USB mode, the DriveStation functions as a normal external USB hard drive. It can be accessed from My Computer. By default, it will receive the next available drive letter and will be named HD-CELU2.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
http://www.buffalotech.com
USA/Canada Technical Support is available 24 hours a day, 7 days a week Toll-Free: 866-752-6210 email: info@buffalotech.com
2005-2008, Buffalo Technology (USA), Inc.

User Manual HD-CELU2 DriveStation FlexNet

www.buffalotech.com

Introduction
The DriveStation FlexNet is a flexible, easy to use hard drive. It can work as either a standard external USB hard drive, or as a network attached storage device, accessible to many computers at once. This user manual is intended to assist you in configuring it. Because were constantly updating our products, the images and text in this manual may vary slightly from the images and text displayed by your DriveStation FlexNet. These changes are minor and should not affect the ease of setup adversely. As time passes, future user interfaces, updated software, and later versions of this manual may be freely available for download at our web site www.buffalotech.com. For best results, attach the DriveStation FlexNet to an uninterruptable power supply (UPS). Back up all your stored files regularly. Package Contents: DriveStation USB/LAN Hard Drive USB Cable Ethernet Cable Power Adaptor DriveNavigator CD Quick Setup Guide Warranty Statement

Table of Contents

Front Panel Layout... 4 Back Panel Layout... 5 Installation... 6 LAN Mode.... 8 USB Mode... 9. Web Admin Tool... 10. Network Settings... 13. Sleep Mode... 14 Disk Management.. 15 Security... 16 Maintenance... 17 Notes.... 19 Technical Specifications.. 20. Contact Information (USA).. 21 Contact Information (Europe)... 22

Front Panel Layout

Power LED
Note: The DriveStation FlexNet can be connected to a computer as both an Ethernet NAS and a USB external hard drive at the same time. To switch between the two modes, hold down the mode button for a few seconds and then release it.
Mode Button/LED Red - USB mode Green - LAN mode

Back Panel Layout

Power button Reset button Ethernet (to router) USB (to PC)

Installation

Insert the installation CD into your PCs CD-ROM drive. Setup will automatically launch. Click on Begin Installation button.

Click Install.

The wizard will guide you through installation. First, youll install the DriveStation FlexNet as a USB device. Then, youll switch modes and install the DriveStation FlexNet in LAN mode as a NAS device. Follow the directions on each screen and continue pressing Next to step through the installation.
When installation is complete, you may close the installation window.
Using your DriveStation FlexNet in LAN Mode
In LAN mode, the mode button will glow green. If its red, hold it in for a few seconds, and then release it. The LED will change to green.
After running the installation wizard, this icon will be on your desktop: BrowseHD-CEL.
In LAN mode, clicking BrowseHD-CEL takes you directly to the main folder on your DriveStation FlexNet.
Using your DriveStation FlexNet in USB Mode
In USB mode, the mode button will glow red. If its green, hold it in for a few seconds, and then release it. The LED will change to red.
In USB mode, the DriveStation functions as a normal external USB hard drive. It can be accessed from My Computer. By default, it will receive the next available drive letter and will be named HD-CELU2.

Web Administration Tool

The Web Admin tool may be accessed by typing the IP address of your DriveStation FlexNet into the URL bar of a browser running on a computer connected to the same network as the DriveStation FlexNet. Or, from your DriveNavigator CD, click Options.
Choose Browse settings page to open the Web Admin tool.

Web Admin - Home

Welcome to your DriveStations Web Admin tool! Bookmark this page in your browser so it can be easily accessed for future configuration changes. If the DriveStation FlexNets IP Address changes, you will need to recreate the link. You can also get here by typing http://DriveStation_Name into a Web browser, where DriveStation_Name is the name (hostname) of your DriveStation FlexNet. You are now at the Home screen. You can navigate this menu by clicking on the links at the left of the screen. Here at Home, you can see basic information about your DriveStations current configuration. To exit Web Admin, close the browser window.
You may modify your DriveStation FlexNets hostname in the Hostname window. A friendly, easy-to-remember name (e.g. DriveStation) is recommended. Make sure that the date and time are correct in Date and Time Setup. To synchronize time settings with those in your computer, press Use Local Time. To have your system time automatically set by an NTP server, enable NTP Server and enter an IP Address for an NTP server (e.g. 192.43.244.18) or click on the box below to use the supplied default NTP server. Ensure that the Display Language is set to a language that youre comfortable with. Click Apply to save your settings.

Network Settings

In most networks, DriveStation will get its IP Address automatically from a DHCP server. You may disable DHCP here if you would rather set a static IP address manually. If DHCP is disabled and an IP Address is not set manually, it will default to 192.168.11.150 with subnet mask 255.255.255.0. In that case, change your PCs IP address to 192.168.11.xxx and subnet mask to 255.255.255.0 to access the DriveStation or use the DriveNavigator Wizard. The DriveStation FlexNets IP Address, Subnet Mask, Default Gateway Address, and DNS Server address may all be entered manually under IP Address Properties. Click Apply after making any changes.

Sleep Mode

To save power, the DriveStation can be set to go into sleep mode after 10 - 60 minutes of inactivity. The sleep mode setting only works when the DriveStation is connected via LAN. To use sleep mode while the DriveStation is in USB mode, install the eco manager tool, located in the Tool/eco folder of your CD.

Disk Management

Here, you may initiate a disk check that scans your DriveStations hard drive for errors. Also, you may reformat the hard drive from here. Reformatting the drive erases all data from the drive, so make sure that your backups are up to date before reformatting the drive.

Security

To enable password protection on the admin account, enter a password twice and click apply. Once the admin account is password protected, you may password protect your shared folder as well.

Maintenance

Reset restores all settings to their factory defaults. Your data isnt affected. Check www.buffalotech.com for updated firmware files. To update the firmware, browse to the updated firmware file and click Upload.
You may also reset the DriveStations settings to factory defaults by holding down the reset button on the back of the unit during startup. Hold down reset, turn the unit on, and continue to hold down the reset button for 30 seconds. The DriveStation will boot with all factory defaults restored.

System Status

This page shows you the System Information for your DriveStation FlexNet.

Notes on Use

With a LAN connection, the maximum file size is 127 GB. Files larger than 4 GB will not be accessible from the USB interface. If no DHCP server is available, the IP address of the device will default to 192.168.11.150. In that case, change your PCs IP address to 192.168.11.xxx to access the DriveStation or use the DriveNavigator Wizard. When in LAN mode, up to 8 clients can access the drive at the same time. Do not switch between USB and LAN modes during file access. A blinking Power/ Access LED can indicate file access. With a USB connection, the maximum file size is 4 GB. If your PC can not reboot properly after installing the software package, uninstall the sleep mode control software to resolve. Before changing from USB mode to LAN mode, use the Safely Remove Hardware wizard to disconnect the USB connection properly. The SecureLockMobile utility is stored in the shared folder of the drive. Its also on the CD at \Tool\SLM\slm.exe. SecureLockMobile works with both USB and Ethernet connections. The power save utility on the CD is for USB connection only. Use the power save settings in the web admin to set power settings in LAN mode. Up to 10 HD-CELU2 units may be set up on the same network.

Technical Specifications

Transmission Speed: Hard Drives: Ethernet Connector: USB Connector: Power Supply: Client OS Support: Power Consumption: Dimensions: Weight: Operating Environment:
10/100 Mbps (Ethernet); 480 Mbps (USB)
3.5 SATA RJ-45 USB 2.0 100-240V 50/60Hz Windows 2000, XP, Vista Max 24W, Average 17W 6.1 x 6.9 x 1.8 (156 x 174 x 45 mm) 35 ounces (1 kg) 41- 95 F, 5- 35 C; 20 - 80% non-condensing
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

Contact Information (North America)
Buffalo Technology USA Inc. 11100 Metric Blvd., Suite 750 Austin, TX 78758

GENERAL INQUIRIES

Monday through Friday 8:30am-5:30pm CST Direct: 512-794-8533 | Toll-free: 800-456-9799 | Fax: 512-794-8520 | Email: sales@ buffalotech.com

TECHNICAL SUPPORT

North American Technical Support by phone is available 24 hours a day, 7 days a week. (USA and Canada). Toll-free: (866) 752-6210 | Email: info@buffalotech.com
Contact Information (Europe)
Buffalo Technology UK Ltd. 2 Bracknell Beeches, Old Bracknell Lane Bracknell, Berkshire, RG12 7BW United Kingdom
Email: sales@buffalo-technology.com
Buffalo Technology provides technical support in English, German, French, Italian and Spanish. For opening hours and relevant telephone numbers, please go to: www.buffalo-technology.com/contact