U2 - One (buffalo version)
U2 // One [Buffalo + band version]
... Procedure on Page 19*
This section describes how to properly install and use the USB Print Server configuration software. Please follow the following steps to properly install the software: Insert the ... display the USB Print Servers on the network.
Configure the USB Print Server by double-clicking on the corresponding Print Server. This will open the USB Print Server's properties.
The name of the USB Print Server can be ... to restore the factory default settings, press the `Reset' tab.
Restart: Reboots the USB Print Server Set to Factory Default: Restores the factory default settings. Once all settings have been changed ... and pressing the `Print Test Page' button. 18
Print Server Configuration It is recommended that you connect the print server directly to your Apple computer using a cross over Ethernet Cable ... the `Set' button when configuration is complete. A message will appear stating that the print server is rebooting.
Rendezvous is enabled by default so if you are using this service in ...
LPV2-TX ,200 http://buffalo.jp/products/catalog/item/l/lpv2-tx1/index.html
LPV3-U ,200 http://buffalo.jp/products/catalog/item/l/lpv3-u2/index.html
System Consultant Wave