WLAR-L11-L Install Manual

1 Features

. Can connect to the Internet using a CATV network. Communications between the Ethernet LAN and the. Equipped with the security functions using MAC address. Seamless communication with iBook, iMacDV, and G4
(AGP model) is possible using wireless card that is compatible with Apple's Airport.
Separate utility software is required that recognizes each other's protocols for data exchange between Windows and Mac. Use DAVE or equivalent installed on the Mac.
This manual explains how to install the AirStation and precautions for the correct use. Be sure to read this manual before using the product.

4 Network Configuration

registration function and WEP (encryption).
wireless LAN is possible. Meet the IEEE802.11b. Wireless baud rate of 11 Mbps is possible. Range: 50 m indoors, or 115 m outdoors (LOS) with nominal baud rate.
25 m indoors, or 50 m outdoors (LOS) at baud rate 11 Mbps. Avoid installation close to metal objects such as steel desks, shelves, microwave ovens and wireless printer buffers. Range and data rate are subject to the radio transmission condition and they may be reduced significantly if there is interference or jamming.
Connecting to the Internet Using CATV Network
Refer to the separate Internet Connection Manual.
OS required for this product
WindowsMe/98/95 or Windows 2000/NT 4.0
. Roaming function compatible. Equipped with multiple channels to reduce network load.
One of the following Web browsers is required to set the AirStation. Internet Explorer 4.0 or later or Netscape Navigator 3.0 or later.

Internet Provider

2 Package Contents
The AirStation package contains the following. If any items are missing, contact TECHWORKS INC. / BUFFALO TECHNOLOGY. representative.

Cable modem

. AirStation (WLAR-L11-L).. 1. AC adapter... 1. AirStation Series Driver CD.. 1. 3-m UTP straight cable (category 5).. 1. WLAR-L11-L Install Manual (This manual).. 1. Internet Connection Manual.. 1. Reference Manual... 1. User registration card and warranty. 1
Fill out the user registration card in the warranty, and return the card to TECHWORKS INC. / BUFFALO TECHNOLOGY. Be sure to keep the warranty in the safe place.

AirStation

3 Before Connecting to the Internet
1. Have you completed contacting to your CATV provider? If not you may need to contract your CATV provider for the contract. Consult your provider to confirm your contract terms before the allocation of multiple address. 2. The following information is required to set the AirStation. The IP address settings (Obtain the IP address setting either automatically from your provider or manually.). The AirStation MAC address (See note below.) *Note: For the location of the MAC address, refer to the "Package Details and Parts Nomenclature and Functions" section later in this manual.

Desktop

Desktop Wireless LAN personal computer Wireless LAN personal computer

PY00-26086-DM10-01 1-01

5 Package Details and Parts Nomenclature and Functions

POWER lamp

Radio Frequency Precautions
Do not install or use the AirStation in the following locations. Close to microwave ovens, or in locations where static electricity or electrical interference may occur (the radio frequency may be jammed in some environments). Note: Using the AirStation near a wireless printer buffer or other device using frequencies near 2.4 GHz may result in reduction of baud rate for both devices.
ON(Green): Power is on. OFF: Power is off.

WIRELESS lamp

ON(Green): Wireless LAN connection is active. Flashing(Green): Communicating with the wireless LAN.

X2 X3 X4 DIAG

ON(Green): Each 10M/100M port is linking. Flashing(Green): Each 10M/100M port is Communicating. ON(Red): Error has occurred Flashing(Red): Writing the flash memory

WAN lamp

ON(Green): 10Base-T Linking. Flashing(Green): Communication is active.

DIAG lamp

ON(Red): Error has occurred (See note) or Initializing or Writing the flash memory. OFF: No error Note: The type of error can be identified by the number of times the DIAG lamp flashes. Refer to Chapter 4 SelfDiagnostic Function in the separate Reference Manual for details.

Side panel

Front panel

Factory setting switch

INIT Switch 10M/100M
Press this switch to reset the AirStation to the factory setting. Connect to the PC and hub.

LAN ADDR

10M/100M

MAC address(LAN side)

Displays the AirStation MAC address(LAN side). 12 digit number starting from "26".

WAN port

Connect to the cable modem and hub.

DC connector

WAN ADDR
Connect to the enclosed AC adapter.

MAC address(WAN side)

Displays the AirStation MAC address(WAN side). 12 digit number starting from "26".

Removing the rear cover

Rear panel
Remove the rear cover by gently squeezing both sides, and then pulling the cover towards you.
WLAR-L11-L Installation Manual 1 November, 2000 First revision TECHWORKS INC./BUFFALO TECHNOLOGY.

802.11b Hardware Compatibility list

Access Points

Cisco-Aironet 340 Series
Buffalo-WLAR-L11G-L (4 Port Router build in) -WLA-L11G (bridge model)
Intel-Intel PRO/Wireless 2011B LAN (WEAP2011NA)
-Intel Home gateway (WLGW2011BAK)

Linksys

-BEFW11S4 (Cable/DSL Router with integrated AP)

Netgear

-ME102 AP
-3Com HomeConnect, Home Wireless Gateway, model # 3CRWE50194

Apple-Airport 1.0/ 2.0

Farallon/Proxim
- NetLine Wireless BroadBand Gateway , PN8581-1

PCMCIA Cards/CF cards

Buffalo-PCMCIA Adapter (WLI-PCM-L11GP)
Linksys-Instant Wireless Network PC Card (WPC11)
-PRO/Wireless 2011 LAN PC (WPC2011NA)
D-Link-Compact Flash Card (DCF650W) -PCMCIA Adapter (DWL650)

Orinoco

-USB adapter (848623856)

Socket

-Compact Flash Adapter (WL6000-320)

-PCMCIA adapter (MA401)

SkyLine- 802.11b Wireless PC Card for Mac/Windows