C.Scope Metal Detectors

C.SCOPE NON-MOTION DETECTORS -THE IDEAL PARTNERS
CS990XD a professional start in metal detecting
Nobody understands the world of treasure hunting like C.Scope. Weve been making high performance metal detectors in Britain for more than 25 years. In that time we have met literally thousands of successful treasure hunters and they have told us about all the features they like to see in a detector. A lot of detectorists have found that it is the meticulous approach which gets results. The CS990XD and CS1220R non-motion detectors have been developed for this style of detecting so that anyone can be detecting like a pro with very little practice. OVERVIEW The CS990XD can be adjusted to achieve maximum performance on all ground types. Theres meter and audio discrimination for eective rejection of rubbish metal signals.
TECHNICAL SINGLE FREQUENCY TECHNOLOGY 17kHz NON-MOTION search technique Push-button retune Manual ground adjustments with pre-set Audio+meter discrimination system 20cm ISOCON waterproof searchhead Counterbalanced battery box/armrest Adjustable stem 8 x AA battery power Socket for (optional) headphones.
NON MOTION operating system allows any sweep speed to be adopted and easy identication of the precise target position. The CS990XD is a neat combination of professional features on a budget priced machine.
CS990XD. TOP RANGE FEATURES BUDGET LEVEL PRICE
REASONS TO CHOOSE THE CS990XD. If you like to get into the science of metal detecting from the word go the CS990XD puts you in the driving seat. All the elements of detector operation are there to adjust for maximum performance. Amateur and professional archaeologists will go for the precision of the CS990XD concept. Sifting carefully through sand or soil in search of the smallest targets is just the job the CS990XD was designed for. If you want professional features at a budget price, the CS990XD is for you.

Available from:

C.SCOPE DIRECT & C.SCOPE STOCKISTS

inc vat

IN YOUR QUEST FOR INFORMATION FROM UNDERGROUND.
CS1220R the power of the computer
TECHNICAL SINGLE FREQUENCY TECHNOLOGY 17kHz Computer controlled 3-Way operating system NON-MOTION search technique Push-button retune HOT CONTROL ground balance Audio and meter discrimination with pre-set
OVERVIEW The CS1220R has been designed for professional treasure hunters. We studied the ways that successful detectorists used their machines and we incorporated all that we learned into the software of the CS1220R. The result is a 3-Mode operating system reecting distinctly dierent ways of working with the CS1220R. G/D MODE is a 2 channel system which allows you to switch rapidly between a MAX DEPTH normal search pattern and TARGET ID to check if the target is worth digging.
METER SEARCH MODE operates as if the eyes and ears of the detector are extended ready to deliver maximum information about the target underground. The audio channel of the detector operates in maximum depth while the screen provides information about the desirability of the object. METER AND AUDIO MODE oers maximum target information contained in the audio signal and onscreen. The intelligent CS1220 R allocates higher pitched sounds to valuable objects and lower pitched sounds to undesirable targets. You listen for the right sound which means treasure underfoot.
20cm ISOCON waterproof search-head. (optional 15cm) Counterbalanced battery box/armrest Adjustable stem 8 x AA battery power Socket for (optional) headphones.
REASONS TO CHOOSE THE CS1220R With the CS1220R you buy into the experience of the hobbys top detector users. The CS1220R is the fast track to successful detecting. If the methodical approach is the one that suits your temperament. If that magic 1220 target ID feature appeals (great on typical farmland sites infested with iron rubbish), then the CS1220R has to be the very best choice for the professional detectorist.

THE REASON WHY COMMITTED 1220 USERS WOULDNT SWAP FOR ANY OTHER DETECTOR LIES IN THE WAY THE MACHINE OPERATES AS AN EXTENSION OF THE SENSES.
C.SCOPE MOTION SYSTEM - SINGLE FREQUENCY TECHNOL
CS3MX all-new, high performance motion detector
OVERVIEW The CS3MX has been developed with simplicity of operation as the number 1 priority. The CS3MX is a switch-on-and-go design with automatic tuning activated by the motion of the search-head passing over the ground. The CS3MX oers superb depth of detection and a variable discrimination setting which eliminates the signals from undesirable targets. The highly responsive CS3MX provides a sharp target signal even at fast sweep speeds.
TECHNICAL 17kHz MOTION search system Automatic retune. Switch on and go Push button target pin-point All metal super depth mode Variable rubbish rejection level 20cm ISOCON waterproof search-head Belt mountable control box Adjustable stem 8 x AA battery power Socket for (optional) headphones.
REASONS TO CHOOSE THE CS3MX Theres beauty in simplicity. If the mere mention of a learning curve lls you full of dread. If youre allergic to operating manuals. If you just want to get out and enjoy the greatest hobby on earth in as much time as it takes you to t the batteries, choose the CS3MX. The CS3MX oers professional levels of detection depth plus a discrimination system which simply eliminates the signals from undesirable targets. If fatigue on the arm is a matter of concern to you, consider the extremely light weight of this detector. If you have a lot of ground to cover and you like to move fast, the highly responsive CS3MX will suit your style of detecting right down to the ground! Performance, simplicity, and price are the reasons to choose the excellent CS3MX.
POWER DETECTING WAS NEVER THIS EASY
OGY - EASY TO USE DETECTORS WITH MAXIMUM POWER.
CS Newforce R1 computer aided search system
OVERVIEW The NEWFORCE R1 harnesses the power of the micro-computer to check ground conditions, optimise depth and provide target identication data all in a user-friendly lightweight design.
TECHNICAL Twin Microprocessor control system 3 Operating frequencies 6 - 7 kHz Liquid Crystal Display with backlight RADAR SIMULATION feature High Speed target analyser with LEARN Target pin-point Audio discrimination User dened programs 25cm and 15cm search-heads standard Independent volume control Counterbalanced battery box/armrest Adjustable stem 8 x AA battery power Socket for (optional) headphones

The computer can handle all the adjustments for the novice or the professional can select menu options to tweak performance exactly to his personal preference. A unique RADAR SIMULATION feature puts the raw signal onto the screen for visual analysis. The smart target analysis software inside the R1 can even sort targets into wanted and unwanted categories and advise the operator on whether to dig. Two searchheads are supplied as standard, a deep seeking 25cm diameter head for general purpose detecting and a 15cm head for working around obstacles such as stubble or undergrowth. The NEWFORCE R1 does it all the ultimate treasure nding instrument.
REASONS TO CHOOSE THE NEWFORCE R1 If you want the best metal detector that money can buy, it doesnt matter if you are a beginner or a professional, the NEWFORCE R1 is a superb choice. Set the controls to automatic and the only thing you need to adjust is the volume. Change over to manual and every aspect of R1 operation comes under your control in a menu system which is so easy to understand. In eect, the R1 grows with you as you develop your detecting skill. Whatever your detecting style and on any type of terrain the NEWFORCE R1 is the detector to work with.
C.SCOPE APPLICATION SPECIFIC DETEC
CS4PI all-terrain all-metal search
OVERVIEW The CS4PI is an extremely powerful metal detector designed for use on all types of ground but excels in the one situation where most other detectors struggle, on the beach. The switch-on-and-go principle makes the CS4PI a joy to use for anyone, even if theyve never used a detector before. Just compare that with some of our competitors whose machines require all sorts of complicated adjustments to work on wet salt beaches. The CS4PI has a distinctive cleverly designed control box which can quickly be detached from the stem and belt mounted around the body. The CS4PI is a high performance treasure nding tool which can perform its specialised functions better than some competitors machines at ve times the price.
TECHNICAL Variable Frequency MOTION search system 1k - 4.2k pps frequency control Audio response with LED Automatic retune switch on and go All metal super depth, optimised for beach operation

25cm open centre waterproof search head Belt mountable control box Adjustable stem 8 x AA battery power Socket for (optional) headphones.
REASONS TO CHOOSE THE CS4PI If you want to be the one to recover a share of the tons of valuables lost on beaches each year, the CS4PI has got to form part of your detecting kit. If you want maximum depth on all metal objects, maybe youre into searching for militaria on old battleeld sites, the CS4PI is a perfect detector to take along. The CS4PI is an ever ready back-up to whatever detector you are regularly using now. The thing is, we think youll end up preferring the back-up detector!
THERES NO COMPROMISE WITH CS4PI PERFORMANCE. ITS THE RIGHT TOOL FOR THE JOB.
CTORS FIND WHAT YOU ARE LOOKING FOR.
CS9000HPX the hoard locator
OVERVIEW The hunt for deep treasure requires a radically dierent approach, thats the CS9000HPX. To probe deep into the ground requires a search coil array which cannot be contained within a conventional disc shaped search-head. By positioning the transmit and receive coils at either end of a mounting bar it becomes possible to locate the tiny signals generated by large pieces of metal deep down in the ground, as much as 2 or even 3 metres. Thats way in excess of the best depth achievable by any conventional metal detector. Signals from small metal objects are simply not detected. If you get a signal with the CS9000HPX, you know youre onto something big.
TECHNICAL MOTION / NON-MOTION search system Automatic and push-button retune Twin antennae array (collapsible for transport) Adjustable ground point 6 x AA battery power Socket for (optional) headphones.
NO CONVENTIONAL DETECTOR CAN GET ANYWHERE NEAR THE DEPTH OF THE CS9000HPX
REASONS TO CHOOSE THE CS9000HPX If you are looking for deep treasure you need a specialised locator. If you are following up some clues which indicate the possibility of big treasure, the CS9000HPX can probe far deeper than any ordinary detector. A typical clue might be a trail of coins across a eld which could have been dragged by a plough from a deeply buried pot. Or you might nd some artefacts and note some terrain features which could indicate an ancient underground burial chamber. (The treasure hunters Code of Conduct - inform museum
authorities about any nds which may have archaeological signicance). On battleeld sites the CS9000HPX comes into its own. Cannonballs, swords, muskets, helmets are all easy targets for the CS9000HPX. The CS9000HPX has been used in the recovery of crashed warplanes at 5 metres. You cant use the CS9000HPX for everyday detecting situations because of its poor sensitivity to small objects. The CS9000HPX is a valuable addition to the equipment of the enthusiast or may be shared within a group. Get ready for some serious excavations!

Every C.SCOPE metal detector is designed to oer the highest possible performance in its class and superb value for money. No hype. No false claims. Just excellent metal detecting instruments for people who are serious about their hobby. C.SCOPE ISO9001 Quality. CE. Environmentally friendly manufacture. Conforms with EU legislation on lead free manufacture. C.SCOPE INTERNATIONAL LTD, ASHFORD, KENT, TN23 6LN, UNITED KINGDOM. TEL: 44 (0) 1233 629181
info@cscope.co.uk www.cscope.co.uk

CS3MX operating instructions

1) 2) 3) 4) 5)

Control box mounting clip On/Off/sensitivity control Loudspeaker Pin-point push button All-metal/discrimination level control
6) Battery compartment cover 7) 8 x AA battery holder 8) Battery contacts 9) Search-head lead 10) Headphone socket
1) Control box mounting clip 6) Battery compartment 11) Control box 12) Hand grip 13) Upper stem 14) Arm support 15) Detector rest 9) Search-head lead 16) Twist to lock stem length adjuster 17) Lower stem 18) Search-head 19) Search-head xing screw, and wing-nut

CS3MX overview

The CS3MX is a high performance metal detector operating on the MOTION principle. This means that the search-head must be kept moving at a steady sweep speed to achieve optimum performance. There is a pin-point function which switches off the motion effect so that the search-head can be brought to rest over the target signal. The discrimination system is capable of eliminating signals from a variety of metals which are likely to be valueless. The CS3MX is designed to offer extremely high performance whilst being easy to operate. We wish you good hunting and a great hobby with the excellent CS3MX!

rapid start

Follow these simple steps to start using the CS3MX within minutes. 1) 2) 3) 4) 5) 6) 7) 8) Assemble the CS3MX by inserting the lower stem into the upper stem. Rotate the lower stem so that the search-head cable is coiled around the stem as shown in the photograph. Twist the locking device so that the stem is locked into position at the required length. Remove the battery compartment cover by loosening the four retaining screws. Fit 8 x AA batteries to the battery holder being careful to observe polarity and good contact. Rotate the discrimination control to the green area on the scale. Switch on and rotate the sensitivity control to the lower part of the green area on the scale. START DETECTING. metal targets give a sharp audio signal from the loudspeaker. signals from small pieces of iron rubbish are ignored. pressing the pin-point button means you can stop swinging the search-head from side to side and identify the exact position of the target
the controls and at they do
1) Control box mounting clip. For ultimate lightweight metal detecting the CS3MX control box can be removed and tted to a belt around the body. This leaves only the search-head on the stem which reduces fatigue on the arm. 2) On/off/sensitivity. Rotary control switches the detector on/off and adjusts the sensitivity. The area on the scale around the control marked in green is the setting recommended for most ground conditions. Ground containing mineralisation and some beach situations may cause instability or false signals requiring a reduction of the sensitivity level. 3) Loudspeaker (and battery condition indicator). The presence of metal is indicated by the increasing intensity of the loudspeaker tone. A distinct step change in the pitch of the audio signal indicates that the batteries should be changed.
Pin-point. The motion aspect of the CS3MX is switched off whilst the pin-point button is depressed. In pin-point mode the search-head can be held still to determine the precise target position. Pin-point mode operates in All Metal, ie. whatever level of discrimination you have preset will be switched off while the pin-point button is depressed. This is a useful facility which allows you to trace around the edges of a signal to identify large pieces of iron. (Note: very large pieces of iron, such as discarded he detector is set to high discrimination settings).

Discrimination. Set to 0 there is no discrimination, ie all metals are detected. Set within the green area (1-4) on the scale signals from most small iron rubbish are ignored, ie. there is no audio signal. At higher settings (4-10) in the red area on the scale more classes of metal likely to be rubbish are ignored. (see Notes on Sensitivity, Ground Effect and Discrimination).

embling the CM3MX

The stem height adjuster should be slackened to allow the lower stem to enter the upper stem section. The search-head lead may then be wound around the stem as shown in the photograph. A search-head lead which is not well secured to the stem could move about causing false signals. Cable ties or tape may be used to hold the lead in position. There are slots in the lower stem plastic section into which the lead can be tted. When the search-head lead is tted correctly, the stem adjusting device can be tightened at a height suitable for the user.
Adjust the position of the search-head so that it is parallel to the ground when the user is in a normal standing position. Tighten the wing-nut on the searchhead retaining screw. Do not over-tighten. Friction of the head lugs against the neoprene washers keeps the search-head in position. Excessive pressure on these parts should not be necessary. (If some form of lubricant should ever nd its way onto these washers it will be necessary to disassemble the parts, wash and dry them before careful reassembly).

belt mounting

Squeeze the control box retaining clips together using your thumbs as shown in the photograph. The control box will now slide towards you free of the control box mounting clip.
The control box can be tted to your belt using the clip provided. In belt mounted use, be sure to wind the search-head cable up the stem at least to the length adjuster and secure it with tape or cable tie. This is because the searchhead is sensitive to metal objects above to some extent and the lead will be detected if it is left free to move.

batteri

Undo the 4 battery compartment retaining screws and take out the battery holder. Fit 8 good quality AA type batteries into the compartments of the battery holder. Observe polarity of the batteries (the spring contact goes against the at, negative end of the battery). Roll the batteries in the holder to ensure good contact and replace into the battery compartment with the contacts on
the holder lining up with the contacts in the compartment. Replace the battery compartment cover being very careful to avoid cross threading the screws. Battery condition is monitored continuously on the CS3MX. Low battery condition is indicated by a step change in the signal tone to a higher pitch.

deing with the CS3MX

Successful treasure hunting starts with a well researched site. Sweep the detector head from side to side with a steady relaxed motion. Keep the searchhead parallel and as close as possible to the ground right across the arc of the sweep. The use of a search-head cover protects the head from abrasion damage caused by friction with the ground. Search your chosen site carefully by moving forward only the width of the search-head at each sweep. Move up and down the search area in lines about a metre apart so that there is plenty of overlap in the ground you have covered. Search with the sensitivity set as high as possible according to the ground conditions. On the majority of inland sites the recommended sensitvity setting (green area on the scale) will give the best results. Some types of ground may give rise to false signals and the sensitivity level should be reduced to a point where operation of the detector becomes stable. Some detector users prefer to set the sensitivity control at a point where there is no background tone, sometimes called silent search. (Sensitivity control set around the start of the green zone). With the detector set like this it is more noticeable when a target signal occurs. If the detector is set at maximum sensitivity (Sensitivity control set at the end of the green zone) there will be an audio tone constantly in the background and a metal target will be registered by an increase in the intensity of that tone. We recommend searching with a low level of discrimination (green area on the scale 1-4). At this setting the CS3MX will not react to small pieces of iron but will give a positive audio tone on other metal targets. Increasing the discrimination level will eliminate signals from a wider range of metal objects which are likely to be rubbish. (See Notes on Sensitivity, Ground Effect and Discrimination). When the detector gives a signal, move the search-head to the approximate area where the signal was heard, press the pin-point button (using your thumb is best) and move the search-head carefully around. The strongest signal will occur directly below the centre of the search-head. Dig a neat hole by cutting around the signal position with a sharp edged trowel and remove a divot of

earth which might now contain the metal object. Run the detector over the area again in pin-point mode to see if the metal object is still in the hole or in the piece of earth which you have just removed. Dig some more and sift through the earth until you nd what you are looking for. Fill in the hole before moving on. The use of headphones will increase battery life and make it easier to discern faint signals.
Follow the Country Code. Do not trespass. Do not touch anything you suspect might be live ammunition - inform the police. Do not take your detector on any scheduled historic site. If you nd anything which looks like it could have historical signicance, report it to your local museum. Acquaint yourself with any laws relating to the use of metal detectors if you want to go detecting in countries other than the UK. Enjoy the countryside and respect its life and work. Fasten all gates. Guard against all risk of re. Keep your dogs under close control. Leave livestock, crops and machinery alone. Take your litter home. Help to keep all water clean. Protect wildlife, plants and trees.
Keep to public paths across farmland. Use gates and stiles to cross fences, hedges and walls.
Take special care on country roads. Make no unnecessary noise.

www.countryside.gov.uk

sensitivity, ground ee & discrimination
You will be able to get more performance out of your detector if you understand the relationship between three aspects of detector operation - sensitivity, ground effect and discrimination. If you increase the power of a metal detector too much the ground itself is detected and false signals make the detector difcult to use. The motion electronic system of the CS3MX will ignore many ground effect signals but some types of ground, notably waterlogged or containing salts or mineralisation require the detector to operate on reduced sensitivity. The CS3MX can be set to ignore signals from certain categories of metal target. Small iron objects in the ground are a problem on many farmland sites. These signals can be ignored by setting the discriminate control to about number 2, within the green area on the discriminate scale. As the control is turned clockwise the signals from more types of metal likely to be worthless can be

Effect of discriminate control position
eliminated. However, the discriminate control must be used with care because some objects which could be valuable have similar electrical characteristics to rubbish items as far as the detector can tell. Higher levels of discrimination also have the effect of reducing the depth of detection. For these reasons it is best to keep the discrimination setting as low as possible.

deor care

The CS3MX is a robust design, however the control box should be treated with similar care as any electronic product. Dry off any water splashes immediately. The search-head may be immersed in water. Stem and search-head parts should be cleaned and dried at the end of a days detecting. Do not use solvents. If the detector has been used on a beach it will be necessary to wash sand and salt residue off the stem adjustment mechanism and the search-head retaining parts using tap water. Remove batteries if the detector is going to be stored for any length of time. Do not open the control box front panel. There are no user serviceable parts inside and you may invalidate your warranty.

warranty & service

operation of your detector.
Your CS3MX is guaranteed free of manufacturing defects as conrmed in our written warranty document. Contact us if you have any concerns about the
The C.SCOPE Customer Service Team really know about metal detectors and are always ready with good advice and rapid after-sales-service.
C.SCOPE is an ISO 9001 Quality Manufacturer. This equipment conforms to the EMC directive 89/336/EEC. System performance may be impaired by unusually strong electromagnetic elds.
C.SCOPE INTERNATIONAL LTD KINGSNORTH TECHNOLOGY PARK WOTTON ROAD ASHFORD KENT TN23 6LN UK Telephone: Fax: email: info@cscope.co.uk internet: www.cscope.co.uk