Reviews & Opinions
Independent and trusted. Read before buy Caddx Ranger 8600!

Caddx Ranger 8600

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Caddx Ranger 8600, size: 52 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Caddx Ranger 8600About Caddx Ranger 8600
Here you can find all about Caddx Ranger 8600 like manual and other informations. For example: review.

Caddx Ranger 8600 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Caddx Ranger 8600 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Caddx Ranger 8600 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

RANGER 8600 DOWNLOADABLE CONTROL COMMUNICATOR INSTALLATION MANUAL

TABLE OF CONTENTS

GENERAL DESCRIPTION. 2 STANDARD AND OPTIONAL PARTS LIST. 2 PARTS DIAGRAM. 3 TERMINAL DRAWING AND SPECIAL NOTES. 4 TERMINAL & FUSE DESCRIPTION. 4 HOW TO PROGRAM THE RANGER 8600. 6 KEYPAD PROGRAMMING EXAMPLES. 7 PROGRAMMING PHONE NUMBERS & FORMATS. 8-9 COMMUNICATOR FORMAT SELECTION GUIDE. 9 OPTIONAL PROGRAMMING INSTRUCTIONS. 10-22 AVAILABLE ZONE TYPES. 11 PROGRAMMING THE AUXILIARY OUTPUTS. 17 DOWNLOAD PROGRAMMING INSTRUCTIONS. 23 PROGRAMMING WORKSHEETS. 24-26 LOCAL TELEPHONE COMPANY INTERFACE INFO. 28 SPECIFICATIONS & WARRANTY. 30
CADDX CONTROLS, INC. GLADEWATER, TEXAS 800-727-2339
RANGER 8600 INSTALLATION MANUAL
General Description The Caddx Ranger 8600 is a versatile 6 zone up/downloadable security control with a built-in digital communicator. Its microcomputer design gives some of the most versatile, yet easy to use features available for most security applications today. Each of the six zones can be programmed to be one of nine different types including 24 Hour, Interior Follower, and Day zone. Each zone is individually annunciated and can be bypassed from the keypad. See page 11 for a description of all zone types. Read the Users Manual before you begin the installation for the best overall description of how the Ranger 8600 functions. After installation of the security system, complete the information on page 1 of the Users Manual and explain the system operation to all security system users.
Standard Parts List The Ranger 8600 is shipped with the parts listed below. QUANTITY PARTS DESCRIPTION MASTER CONTROL PANEL REMOTE KEYPAD 16.5VAC 25VA TRANSFORMER 3.3K 1/2 WATT E.O.L. RESISTORS INSTALLATION MANUAL USERS MANUAL PART # T-1625 EOL-33 IM-8600 OM-8600
Optional Parts List The following parts are available for use with the Ranger 8600. OPTIONAL PARTS DESCRIPTION LCD ALPHA NUMERIC KEYPAD PROGRAMMER WITH DIGITAL NUMERIC DISPLAY DOWNLOADING SOFTWARE CAMLOCK W/KEYS AND RETAINER 12VDC 6AH BATTERY END OF LINE DEVICE SMART PROGRAMMER PART # 9050 / 9060E 8950 DL-900 600-CL B-1260 EOL-34UL 9075

PARTS DIAGRAM

TERMINAL DRAWING & SPECIAL NOTES

TERMINAL DESCRIPTION

TERMINAL -9 10, 11, 12, 13 DESCRIPTION Connect one side of zone 1 loop. The other side of loop to common terminal 2. Open or short causes alarm. Common (-) Terminal. Connect one side of zone 2 loop. The other side of loop to common terminal 2. Open or short causes alarm. See Terminal Drawing and repeat the above sequence for zones 3-8 Connect keypad wires as follows; yellow to terminal 10, green to terminal 11, black to terminal 12, red to terminal 13. 200 ft. maximum run with 22 gauge wire, 500 ft. maximum run with 18 gauge wire. Home run cable to each keypad. Siren driver output to speaker(s), (speaker rating should be 15 watt at 8 or 16 ohm, or 30/40 watt at 4, 8, or 16 ohms). If siren driver disable is selected in location 132, output becomes voltage output, 12VDC, 1 Amp maximum load. Smoke detector power 12VDC, 100 mA maximum (For those jurisdictions which allow the Priority zone to be used with smoke detectors.) Auxiliary power, regulated 12VDC, 500 mA maximum. Earth Ground, connect to a cold water pipe or 6 to 10 foot driven rod. AC input, connect a 16.5V 25 VA, Class II U.L. approved transformer (included). House Telephone Tip (Brown) Telephone Tip (Green) Telephone Ring (Red) House Telephone Ring (Gray) Standby battery leads black(-) and red(+) connect to a 12VDC lead acid rechargeable battery. Do not connect to a dry cell battery.

14(-) & 15(+)

16(-) & 17(+) 18(-) & 19(+) & 22 T1 T R R1 Battery Leads

FUSE DESCRIPTION

FUSE # F2 F3 F4 DESCRIPTION KEYPAD (1 AMP) SPEAKER / BELL (2 AMP) AUXILIARY / SMOKE DETECTOR POWER (1 AMP)

A="10"

B="11" C="12" D="13" E="14" F="15"
LOCATIONS 000-003: PROGRAMMING THE MASTER ARM/DISARM CODE Locations 000-003 contain master arm/disarm code (user number 1). Location 000 contains the first digit of the code; location 003 contains the fourth digit of the code. THE CODE MUST CONTAIN FOUR (4) DIGITS. The master code can then be used in the run mode to enter arm/disarm codes 1-7. LOCATIONS 004-023: PROGRAMMING THE ARM/DISARM CODE FOR USERS 2 THRU 6 Locations 004-023 contain the arm/disarm codes for user numbers 2 thru 6. Location 004 contains the first digit of the code #2, and location 007 contains the fourth digit of code #2. THESE CODES MUST CONTAIN FOUR (4) DIGITS. To disable a code, program a "15" as the first digit of the code. These codes can be changed in the RUN mode using the master code. LOCATIONS 024-027: PROGRAMMING THE DURESS CODE OR USER 7 Locations 024-027 contain the arm/disarm code for Duress or for user number 7. Duress capability is enabled by programming a communicator code in locations 086-087. If locations 086-087 are left unprogrammed, user number 7 will act as a standard user code. If the maintenance code option is selected in location 167, locations 024-027 should not be programmed. LOCATIONS 028-031: PROGRAMMING THE "GO TO PROGRAM" ACCESS CODE Locations 028-031 contain the "Go To Program" access code. Location 028 contains the first digit of the code and location 031 contains the fourth digit of the code. THE CODE MUST CONTAIN FOUR (4) DIGITS. With the Ranger 8600 disarmed, the "Go To Program" access code can be used to enter the program mode. To disable the "Go To Program" access code, program a "15" in location 028. The factory default setting is [9]-[7]-[1]-[3]. LOCATIONS 032-074: SEE PAGES 8 & 9 LOCATION 075: PROGRAMMING THE ENTRY DELAY TIME Location 075 contains the number of 10 second increments in the entry delay. The entry delay can be programmed in 10 second increments from 10 to 150 seconds ("1" = 10 seconds through "15" = 150 seconds). For example, programming a "2" in this location will produce an entry delay of 20 seconds. (Note: A "0" entry is treated as 0 seconds). Programming a "6" in this location will produce an entry delay of 60 seconds. Factory default is 30 seconds. LOCATION 076: PROGRAMMING THE EXIT DELAY TIME Location 076 contains the number of 10 second increments in the exit delay. The exit delay can be programmed in 10 second increments from 10 to 150 seconds ("1" = 10 seconds through "15" =150 seconds). For example, programming a "2" in this location will produce an exit delay of 20 seconds. (Note: A "0" entry is treated as 0 seconds). Programming a "6" in this location will produce an exit delay of 60 seconds. Factory default is 60 seconds. LOCATION 077: PROGRAMMING THE SIREN SHUTDOWN/RECYCLE TIMEOUT Location 077 contains the number of 2 minute increments in the automatic cutoff time. The automatic cutoff time can be programmed in 2 minute increments from 2 to 30 minutes ("1" = 2 min thru "15" = 30 min). For example, programming a "2" in this location will produce an automatic cutoff time of 4 minutes. Programming a "6" in this location will produce an automatic cutoff time of 12 minutes.

LOCATIONS 078-083: PROGRAMMING THE ZONE TYPES Locations 078 through 083 contain a number identifying the characteristics of each of the 8 zones. Location 078 corresponds to zone 1 and location 083 corresponds to zone 6. Each zone will factory default according to the programming worksheet. To program zone characteristics other than the default values, program a number from "1" to "9" based on the zone types available in the chart on the following page.
DATA "1" "2" "3" "4" "5" AVAILABLE ZONE TYPES DAY ZONE - When armed, a trip produces an instant alarm. When disarmed, a trip activates the keypad sounder. 24 HOUR - A trip on a 24 Hour zone produces an instant alarm when armed or disarmed. ENTRY/EXIT - A trip will start entry delay. The lack of a trip during exit delay will enable the Automatic Bypass or Instant mode if so programmed. INTERIOR DELAY - A trip on Interior Delay zone will initiate an entry delay. It will be ignored during exit delay and when disarmed. INTERIOR FOLLOWER - Interior zone that follows the delay zones. It is instant during non-delay times. It can be bypassed before arming, or by allowing it to automatically be bypassed in the Automatic Bypass/Instant mode if so programmed. INSTANT - Produces an instant alarm if tripped when armed. Ignored when disarmed. 24 HOUR SILENT - A trip on a 24 hour silent zone will communicate to the central station when the Ranger 8600 is armed or disarmed. FIRE (PRIORITY WHEN AHJ HAS NOT APPROVED) - A short on a FIRE zone (non-bypassable) will communicate to the central station when the Ranger 8600 is armed or disarmed. An open will create a Trouble condition. Keypad LED will be steady for FIRE, and flashing for Trouble. SECONDARY DELAY - A secondary delay zone works like an entry/exit delay zone but has its own independent delay time (see locations 178-179).
"6" "7" "8"

"9"

NOTE: WHEN PROGRAMMING THE FOLLOWING COMMUNICATOR CODES, A "10" MUST BE PROGRAMMED IN ORDER TO REPORT A ZERO (0). LOCATION 084-085: RESERVED LOCATION 086-087: PROGRAMMING THE RANGER 8600 FOR DURESS CODE CAPABILITY The Ranger 8600 has the ability to report a duress code when the system is armed or disarmed with user code number 7 and a duress communicator code is programmed in locations 086-087. If both locations are "0", the duress capability is disabled and user code number 7 can only be used as a standard arm/disarm code. Location 086 contains the standard digit, and location 087 contains the extended digit. When using 4+2 format, the number programmed in location 086 is sent as the "ones" digit. The "tens" digit is programmed in location 087. NOTE: ENABLING THE MAINTENANCE CODE FEATURE IN LOCATION 167 WILL AUTOMATICALLY DISABLE THE DURESS FEATURE. LOCATION 088-089: PROGRAMMING FOR AUXILIARY 1, [1] & [3] DOUBLE KEYPRESS The Ranger 8600 has the ability to report an Auxiliary 1 code and activate the Priority siren each time the [1] and [3] keys are pressed simultaneously on the keypad. The desired reporting code is programmed in locations 088-089. If both locations are "0", the Auxiliary 1 double keypress is disabled. Location 088 contains the standard digit, and location 089 contains the extended digit. When using a 4+2 format, the number programmed in location 088 is sent as the "ones" digit. The "tens" digit is programmed in location 089. If activated, the siren can be silenced by entering any arm/disarm code.

LOCATION 103: PROGRAMMING TO REPORT OPENINGS The Ranger 8600 has the ability to report an opening code each time the control is disarmed. The desired opening code is programmed in location 103. If this location contains a "0", openings will not be reported. When using 4+2 format, the number programmed in this location is sent as the"tens" digit. The "ones" digit is automatically the man number. When using the remote arming input, the man number is 1. LOCATION 104-105: PROGRAMMING THE COMMUNICATOR CODE FOR ZONE 1 Locations 104-105 contain the communicator code to be reported each time zone 1 creates an alarm. Location 104 contains the standard digit, and location 105 contains the extended digit. When using 4+2 format, the number programmed in location 104 is sent as the "ones" digit. The "tens" digit is programmed in location 105. LOCATION 106-107: PROGRAMMING THE COMMUNICATOR CODE FOR ZONE 2 Locations 106-107 contain the communicator code to be reported each time zone 2 creates an alarm. Location 106 contains the standard digit, and location 107 contains the extended digit. When using 4+2 format, the number programmed in location 106 is sent as the "ones" digit. The "tens" digit is programmed in location 107. LOCATION 108-109: PROGRAMMING THE COMMUNICATOR CODE FOR ZONE 3 Locations 108-109 contain the communicator code to be reported each time zone 3 creates an alarm. Location 108 contains the standard digit, and location 109 contains the extended digit. When using 4+2 format, the number programmed in location 108 is sent as the "ones" digit. The "tens" digit is programmed in location 109. LOCATION 110-111: PROGRAMMING THE COMMUNICATOR CODE FOR ZONE 4 Locations 110-111 contain the communicator code to be reported each time zone 4 creates an alarm. Location 110 contains the standard digit, and location 111 contains the extended digit. When using 4+2 format, the number programmed in location 110 is sent as the "ones" digit. The "tens" digit is programmed in location 111. LOCATION 112-113: PROGRAMMING THE COMMUNICATOR CODE FOR ZONE 5 Locations 112-113 contain the communicator code to be reported each time zone 5 creates an alarm. Location 112 contains the standard digit, and location 113 contains the extended digit. When using 4+2 format, the number programmed in location 112 is sent as the "ones" digit. The "tens" digit is programmed in location 113. LOCATION 114-115: PROGRAMMING THE COMMUNICATOR CODE FOR ZONE 6 Locations 114-115 contain the communicator code to be reported each time zone 6 creates an alarm. Location 114 contains the standard digit, and location 115 contains the extended digit. When using 4+2 format, the number programmed in location 114 is sent as the "ones" digit. The "tens" digit is programmed in location 115. LOCATION 116-118: RESERVED LOCATION 120-121: PROGRAMMING TO REPORT AC POWER LOSS The Ranger 8600 has the ability to report an AC power failure code when AC power is lost. This report can be immediate, or delayed depending on the information programmed in location 150 (AC Power Loss Delay). The desired AC failure mode should be programmed in locations 120-121. If both locations are "0", AC power failures will not be reported. Location 120 contains the standard digit, and location 121 contains the extended digit. When using 4+2 format, the number programmed in location 120 is sent as the "ones" digit. The "tens" digit is programmed in location 121.

LOCATION 130: ENABLING THE SWINGER SHUTDOWN Location 130 is used to enable the burglary zone swinger shutdown. The number programmed in this location, will determine the number of trips the Ranger 8600 will allow, before bypassing all burglary zones (1-8) which have tripped during an arming cycle. The bypassed zones will not report trips to a central station, and the local siren or bell will not sound for these zones. A zone trip will not be added to the number count until after the zone has tripped more than once. A zone trip will only be added each time the siren cycle starts. If this location contains a "0", this feature is disabled. A zone which has been bypassed by this feature will be reported if bypass reporting is enabled in location 125. If "Immediate Restore By Zone" is enabled in location 137, multiple reports may be transmitted during a siren cycle without adding to the trip count. LOCATION 131: AUTOMATIC BYPASS / INSTANT ARMING Location 131 is used to enable automatic "Instant Arming". Programming a "1" in this location will cause the control to automatically enter the "Instant" mode and bypass interior follower zones if a fault is not detected on an entry/exit zone during the exit delay. Programming a "3" in this location (Automatic Bypass), will cause the interior follower zones to become bypassed if a fault is not detected on an entry/exit zone, yet will not change the status of the entry/exit zone. If this location contains a "0", these features are disabled. Pressing the [r] key when the system is armed, will cause the "Instant" light to toggle. When the "Instant" light is on, the entry/exit zone is instant; when off, the entry/exit zone is delayed. The [r] key will toggle the "Instant" mode regardless of the programming data in this location. LOCATION 132: BUILT-IN SIREN DRIVER / 1 AMP VOLTAGE OUTPUT The built-in siren driver has a steady sound (for Priority zone type), and a yelp sound (for Burglary and Panic). Factory default is "0", enabling this feature. If the built-in siren driver is NOT to be used, take the following procedure. First, remove the jumper marked voltage/siren on the PC board. Next, program a "1" in location 132. Finally, replace the jumper in the voltage position. Terminals 21 & 22 will now output 1 Amp at 12VDC. LOCATION 133: L.E.D. EXTINGUISH FEATURE Keypad LEDs (excluding the A.C. LED) will be extinguished after 60 seconds of keypad inactivity, if a "1" is programmed in location 133. The LEDs will become illuminated immediately upon a keypress or alarm condition. LOCATION 134: ENTERING THE NUMBER OF DIAL ATTEMPTS Location 134 is used to enter the number of dial attempts (1 to 15 attempts) the communicator will try for the appropriate phone number(s) before ending the notification process. If this location contains an "8", the communicator will make eight attempts to the first number, and then eight attempts to a second number, if a second number is programmed as backup. LOCATION 135: POWER UP CONDITION If a "1" is programmed in location 135, the Ranger 8600 will power-up disarmed if there is a total power shutdown and battery failure. If a "2" is programmed in this location, it will power up armed. If this location contains a "0", the Ranger 8600 will power up in the condition it was in at power down. A watchdog circuit reset will cause the Ranger 8600 to reset to the selected condition. LOCATION 136: POWER UP DELAY If a "1" is programmed in location 136, the Ranger 8600 will not delay 60 seconds before accepting open or short inputs from any zone. If a "0" is programmed, sensors on all zones are allowed 60 seconds to stabilize at power-up. After 60 seconds, the Ranger will once again accept loop opens or shorts as an alarm condition. This 60 second period will also be initiated after exiting the program mode, or a watchdog circuit reset condition.

LOCATION 137: IMMEDIATE RESTORE BY ZONE If a "1" is programmed in location 137, restoral signals will follow the restore condition and report restores immediately after the condition has unfaulted. A non-extended format will not send a restore message until all zones and trouble conditions have restored. If this location contains a "0", the restore signal or signals will be reported only after siren timeout. LOCATION 138: NO ARMING WITH A ZONE BYPASSED If a "1" is programmed in location 138, the Ranger 8600 will not arm with any zone bypassed. If programmed with a "0", up to 5 of the 6 burglary zones can be bypassed, and the Ranger 8600 can still be armed. If an 8" is programmed, it will prevent beeping if A.C. power is lost and having to re-enter codes two times to stop the beeping. LOCATION 139: PROGRAMMING THE QUICK ARM DIGIT Location 139 contains the "Quick Arm" digit. To enable, program a digit (1-9) in this location. If the "Quick Arm" digit is the same as the first digit of the Master code (user 1), the "Chime" feature will not function. The "Quick Arm" digit cannot be the same as the first digit of the "Go To Program" code. Default is "0", disabled. LOCATION 140: PRIORITY SIREN CUTOFF INHIBIT If a "1" is programmed in location 140, a Priority zone type siren will sound continuously until an arm/disarm code is entered. If this location contains a "0", the Priority zone type siren will shutdown after the amount of time programmed in location 077 has elapsed. Programming in this location does not affect the burglary siren. LOCATION 141: DOUBLE LINE EXTENDED ALARM REPORTING If an extended format is selected in location 052, and a "1" is programmed in location 141, all reports will be double line extended. If location 141 contains a "0", only non-alarm reports will be extended (restore, cancel, opening, closing, bypass, and trouble). With this format, the central station will receive the report on two printed lines. The example below shows a burglary report from zone 6 of account number 999. Zone 6 was programmed to report a 3.

LINE 1: LINE 2:

999 (ACCOUNT CODE) 333 (ACCOUNT CODE)

3 (CODE) 6 (EXT CODE)

LOCATION 142: SIREN/BELL TEST FEATURE Programming a "1" in location 142 will cause the siren/bell to come on each time the [1] and [7] keys are pressed simultaneously. The siren/bell can be silenced with an arm/disarm code. The siren/bell test does not cause the communicator to transmit a message. LOCATION 143: RESETTABLE AUXILIARY POWER Programming a "1" in location 143 will cause the 8600 (when in the disarmed state) to interrupt the smoke detector power each time the [#] button is pressed. If this location contains a "0", the smoke detector power will reset only after the [#] button is pressed when zone(s) designated as Priority zone types are on steady for alarm or blinking for trouble. LOCATION 144: EUROPEAN PULSE DIAL RATIO Programming a "1" in location 144 will change the pulse dialing make/break ratio and interdigit spacing to conform to most European telecom standards.
LOCATION 145-148: PROGRAMMING THE AUXILIARY OUTPUTS Four of the functions in the following table are available on the 4-pin connector on the PC board. These outputs are often used to switch small relays, LED's, trip long range radio, or to add a remote sensor. For example, to create an LED that lights for alarm memory, program a "7" into location 145. Wire the positive lead of the LED to terminal 26 (positive aux power) and the negative lead through a limiting resistor of approximately 650 ohms to PIN #1 (top pin) of the aux output pin connector. If the LED operation is "ON" when you want it to be "OFF", see location 149. NOTE: NO MORE THAN 20 MILLIAMPS CAN BE SUPPLIED FROM THESE TERMINALS.
DATA "0" "1" "2" "3" "4" "5" "6" "7" "8" "9"
ACTIVATION ON ARMED STATE READY BURG/PANIC SIREN PRIORITY SIREN ARMED WITH BYPASS AC POWER LOW BATTERY ALARM MEMORY ENTRY EXIT
NOTES LATCHED OUTPUT LATCHED OUTPUT RECYCLED OUTPUT RECYCLED OUTPUT LATCHED OUTPUT LATCHED OUTPUT LATCHED OUTPUT LATCHED OUTPUT LATCHED OUTPUT MOMENTARY OUTPUT
LOCATIONS 149: INVERTING THE AUXILIARY OUTPUTS Auxiliary outputs are normally "OFF", and turn "ON" when the selected condition occurs. For outputs you wish to reverse, add up their values according to the chart below and program the sum in this location. For example, to reverse outputs 2 and 3, program a "6" (2 + 4 = "6") in location 149.

VALUE 4 8

DESCRIPTION Invert auxiliary 1 output Invert auxiliary 2 output Invert auxiliary 3 output Invert auxiliary 4 output
LOCATION 150: AC POWER LOSS DELAY FEATURE Location 150 is used to disable the 5 minute delay before reporting an AC power failure. If a "1" is programmed in this location, AC power failures will be reported immediately. If a "0" is programmed in this location, AC power failures will not be reported until the power has been off for 5 minutes.

LOCATION 151: PROGRAMMING THE NUMBER OF RINGS TO ANSWER DOWNLOAD CALL Location 151 contains the number of rings the 8600 must detect before answering the telephone when initiating a download. If a number from "1" to "15" is programmed in this location, the control will answer after THIS number of rings has been detected. If a "0" is programmed in this location, the 8600 will not answer the download call. (SEE LOCATION 210: ANSWERING MACHINE DEFEAT) LOCATION 152: PROGRAMMING THE NUMBER OF DAYS LEFT UNTIL AUTOTEST REPORT Location 152 contains the number of days left until the next autotest report. If this location contains a "0", an autotest signal will be reported the first time the current time equals the autotest time programmed in locations 162-165. Locations 098-099 must be programmed to enable autotest reporting. LOCATION 153: PROGRAMMING THE CLOCK, CURRENT MONTH Location 153 contains the current month. The month must be programmed using a number from "1" to "12". This location must be programmed when using the maintenance code feature (see location 167). LOCATION 154: PROGRAMMING THE CLOCK, CURRENT YEAR - TENS DIGIT Location 154 contains the current year - tens digit. If the current year is 1994, this location should contain a 9, which is the tens digit of the current year. LOCATION 155: PROGRAMMING THE CLOCK, CURRENT YEAR - ONES DIGIT Location 155 contains the current year - ones digit. If the current year is 1994, this location should contain a "4", which is the ones digit of the current year. If the current year is 1995, this location should contain a "5", which is the ones digit of the current year. LOCATION 156: PROGRAMMING THE CLOCK, CURRENT DAY OF THE MONTH - TENS DIGIT Location 156 contains the current day of the month - tens digit. If the current day of the month is the 5th (05), this location should contain a "0", which is the current day of the month - tens digit. If the current day of the month is the 26th, this location should contain a "2". LOCATION 157: PROGRAMMING THE CLOCK, CURRENT DAY OF THE MONTH - ONES DIGIT Location 157 contains the current day of the month - ones digit. If the current day of the month is the 5th (05), this location should contain a "5", which is the current day of the month - ones digit. If the current day of the month is the 26th, this location should contain a "6". LOCATION 158: PROGRAMMING THE CLOCK, CURRENT HOUR - TENS DIGIT Location 158 contains the current hour - tens digit. The time is entered in 24 hour time. If the current time is 5:25 PM, the 24 hour time is 17:25, so this location should contain a "1", which is the current hour - tens digit. If the current time is 9:36 AM, the 24 hour time is 09:36, so this location should contain a "0". LOCATION 159: PROGRAMMING THE CLOCK, CURRENT HOUR - ONES DIGIT Location 159 contains the current hour - ones digit. The time is entered in 24 hour time. If the current time is 5:25 PM, the 24 hour time is 17:25, so this location should contain a "7", which is the current hour - ones digit. If the current time is 9:36 AM, the 24 hour time is 09:36, and this location should contain a "9".

LOCATION 175: PROGRAMMING ZONES 1, AND/OR 2 FOR NORMALLY CLOSED OPERATION ONLY Location 175 is used to program zones 1 and/or 2 for normally closed operation only, eliminating the need for the end of line resistors on these zones. When a zone is programmed for normally closed operation, a short on that zone will not change the loop condition, and an open on that zone will produce a faulted condition. This feature will be ignored by any Priority zone. To program a zone for normally closed only, refer to the chart on the following page, and program the appropriate data in this location.
ZONES TO PROGRAM FOR N/C OPERATION 2&1
DATA T0 PROGRAM IN LOCATION 175 "1" "2" "3"
LOCATION 176: SPLIT REPORTING - PROGRAMMING TAMPER, DOWNLOAD COMPLETE, AND AUTOTEST TO REPORT TO THE SECONDARY PHONE NUMBER The 8600 is capable sending certain reports to the secondary telephone number. This feature known as split reporting can be used to send alarm reports to one number and supervisory reports to another number. When using split reporting with the 8600, the primary telephone number always takes priority over the secondary telephone number. The 8600 always sends zone and alarm reports to the primary telephone number. There are 7 reports that can be programmed to report to the second telephone number. Location 176 is used to force up to three of these individual reports to the second telephone number. To program tamper, download complete, or autotest to report to the secondary telephone number, use the following chart and program the appropriate number in location 176.
REPORTS TO SEND TO SECONDARY NUMBER AUTOTEST DOWNLOAD COMPLETE DOWNLOAD COMPLETE ; AUTOTEST TAMPER TAMPER ; AUTOTEST TAMPER ; DOWNLOAD COMPLETE TAMPER ; DOWNLOAD COMPLETE ; AUTOTEST
DATA T0 PROGRAM IN LOCATION 176 "2" "4" "6" "8" A = "10" C = "12" E = "14"
LOCATION 177: SPLIT REPORTING - PROGRAMMING AC POWER FAIL, LOW BATTERY, OPEN/CLOSE, AND MAINTENANCE OPEN/CLOSE TO REPORT TO THE SECONDARY PHONE NUMBER The 8600 is capable sending certain reports to the secondary telephone number. This feature known as split reporting can be used to send alarm reports to one number, and supervisory reports to another number. When using split reporting with the 8600, the primary telephone number always takes priority over the secondary number. The 8600 always sends zone and alarm reports to the primary number. There are 7 reports that can be programmed to report to the second telephone number. Location 177 is used to force up to four of these individual reports to the second number. To program AC power fail, low battery, open/close, or maintenance code open/close to report to the secondary number, use the following chart and program the appropriate data in this location.

ARM/DISARM CODES 1-7

LOCATION 000-003 004-007 008-011 012-015 016-019 020-023 024-027 028-031 PAGE DESCRIPTION USER #1 ARM / DISARM CODE USER #2 ARM / DISARM CODE USER #3 ARM / DISARM CODE USER #4 ARM / DISARM CODE USER #5 ARM / DISARM CODE USER #6 ARM / DISARM CODE USER #7 ARM / DISARM CODE "GO TO PROGRAM" ACCESS CODE DATA 1 DATA 2 DATA 3 DATA 4 DEFAULT "1-2-3-4" "15" DISABLED "15" DISABLED "15" DISABLED "15" DISABLED "15" DISABLED "15" DISABLED "9-7-1-3"
PHONE NUMBERS, ACCOUNT CODES, & FORMATS
032-039 040-047 048-053 054-061 062-069 070-9 PRIMARY PHONE NUMBER DIGITS 1 - 8 PRIMARY PHONE NUMBER DIGITS 9 - 16 PRIMARY ACCOUNT CODE PRIMARY FORMAT SECONDARY PHONE NUMBER AS BACK-UP SECONDARY PHONE NUMBER DIGITS 1 - 8 SECONDARY PHONE NUMBER DIGITS 9 - 16 SECONDARY ACCOUNT CODE SECONDARY FORMAT "0" DISABLED "0" DISABLED "0" DISABLED "0" DISABLED "0" ENABLED "0" DISABLED "0" DISABLED "0" DISABLED "0" DISABLED
CONTROL & COMMUNICATOR FEATURES
LOCATION 085 PAGE 11 DESCRIPTION ENTRY DELAY TIME (10 SECOND INCREMENTS) EXIT DELAY TIME (10 SECOND INCREMENTS) SIREN SHUTDOWN / RECYCLE TIME OUT (2 MINUTE INCREMENTS) ZONE 1 TYPE ZONE 2 TYPE ZONE 3 TYPE ZONE 4 TYPE ZONE 5 TYPE ZONE 6 TYPE RESERVED RESERVED DATA DEFAULT "3" 30 SECONDS "6" 60 SECONDS "4" 8 MINUTES "3" ENTRY / EXIT "5" INT FOLLOWER "6" INSTANT "6" INSTANT "6" INSTANT "6" INSTANT RESERVED RESERVED
LOCATION 086-087 088-089 090-091 092-093 094-095 096-097 098-099 100-101 102

PAGE 12

DESCRIPTION DURESS COMMUNICATOR CODE AUX 1 COMMUNICATOR CODE AUX 2 COMMUNICATOR CODE KEYPAD PANIC COMMUNICATOR CODE TAMPER COMMUNICATOR CODE DOWNLOAD COMPLETE COMM CODE AUTOTEST COMMUNICATOR CODE RESERVED CLOSING COMMUNICATOR CODE

ZONE ID

EVENT/EXT CODE
DEFAULT "0" DISABLED "0" DISABLED "0" DISABLED "2 - 0" "0" DISABLED "0" DISABLED "0" DISABLED RESERVED

MAN NUMBER

"0" DISABLED
LOCATION 103 104-105 106-107 108-109 110-111 112-113 114-115 116-117 118-119 120-121 122-127

PAGE 14

DESCRIPTION OPENING COMMUNICATOR CODE ZONE 1 COMMUNICATOR CODE ZONE 2 COMMUNICATOR CODE ZONE 3 COMMUNICATOR CODE ZONE 4 COMMUNICATOR CODE ZONE 5 COMMUNICATOR CODE ZONE 6 COMMUNICATOR CODE RESERVED RESERVED AC POWER LOSS COMMUNICATOR CODE LOW BATTERY COMMUNICATOR CODE TROUBLE COMMUNICATOR CODE ZONE BYPASS COMMUNICATOR CODE RESTORE COMMUNICATOR CODE CANCEL COMMUNICATOR CODE
EVENT/EXT CODE MAN NUMBER
DEFAULT "0" DISABLED "1 - 0" "2 - 0" "3 - 0" "4 - 0" "5 - 0" "6 - 0" RESERVED RESERVED "0" DISABLED "0" DISABLED

ZONE NUMBER ZONE NUMBER ZONE NUMBER MAN NUMBER
"0" DISABLED "0" DISABLED "0" DISABLED "0" DISABLED

LOCATION 154 155

PAGE ABORT COMMUNICATOR CODE

DESCRIPTION

DEFAULT "0" DISABLED "0" AUDIBLE "0" DISABLED "0" DISABLED "0" SIREN DRIVER "0" DISABLED "8" EIGHT ATTEMPTS "0" LAST CONDITION "0" 60 SEC DELAY "0" DISABLED "0" DISABLED "0" DISABLED "0" RECYCLES "0" DISABLED "0" DISABLED "1" POWER RESET "0" DISABLED "0" ARMED "1" READY "2" BURG SIREN "3" FIRE SIREN "0" HIGH GOING LOW "0" DELAYED "8" EIGHT RINGS UNDEFINED UNDEFINED UNDEFINED UNDEFINED
KEYPAD PANIC SILENT OR AUDIBLE NUMBER OF ALARMS FOR SWINGER SHUTDOWN AUTO BYPASS/ INSTANT ARMING SIREN DRIVER OR VOLTAGE OUTPUT LED EXTINGUISH FEATURE NUMBER OF DIAL ATTEMPTS POWER UP CONDITION POWER UP DELAY IMMEDIATE RESTORE BY ZONE NO ARMING WITH ZONE BYPASSED QUICK ARM DIGIT FIRE SIREN CUTOFF INHIBIT DOUBLE LINE EXTENDED REPORTING SIREN/BELL TEST FEATURE RESETTABLE AUXILIARY POWER EUROPEAN PULSE DIAL RATIO AUXILIARY OUTPUT #1 AUXILIARY OUTPUT #2 AUXILIARY OUTPUT #3 AUXILIARY OUTPUT #4 INVERTING THE AUXILIARY OUTPUTS AC POWER LOSS DELAY NUMBER OF RINGS TO ANSWER DOWNLOAD CALL NUMBER OF DAYS LEFT UNTIL AUTOTEST PROGRAM CLOCK, CURRENT MONTH PROGRAM CLOCK, CURRENT YEAR - TENS DIGIT (1994) PROGRAM CLOCK, CURRENT YEAR - ONES DIGIT (1994)

LOCATION 180 181-185

PAGE 22 22
DESCRIPTION PROGRAM CLOCK, CURRENT DAY OF MONTH - TENS DIGIT PROGRAM CLOCK, CURRENT DAY OF MONTH - ONES DIGIT PROGRAM CLOCK, CURRENT HOUR - TENS DIGIT PROGRAM CLOCK, CURRENT HOUR - ONES DIGIT PROGRAM CLOCK, CURRENT MINUTE - TENS DIGIT PROGRAM CLOCK, CURRENT MINUTE - ONES DIGIT PROGRAM AUTOTEST TIME, HOUR - TENS DIGIT PROGRAM AUTOTEST TIME, HOUR - ONES DIGIT PROGRAM AUTOTEST TIME, MINUTE - TENS DIGIT PROGRAM AUTOTEST TIME, MINUTE - ONES DIGIT PROGRAM AUTOTEST TIME REPORTING INTERVALS ROTATING MAINTENANCE CODES ENABLE ROTATING MAINTENANCE CODES - SEED CODE DIGIT 1 ROTATING MAINTENANCE CODES - SEED CODE DIGIT 2 ROTATING MAINTENANCE CODES - SEED CODE DIGIT 3 ROTATING MAINTENANCE CODES - SEED CODE DIGIT 4 USER #7 (MAINTENANCE CODE) OPENING REPORT USER #7 (MAINTENANCE CODE) CLOSING REPORT PROGRAM ZONES 3 THRU 6 FOR NORMALLY CLOSED OPERATION PROGRAM ZONES 1 AND/OR 2 FOR NORMALLY CLOSED OPERATION SPLIT REPORT - TAMPER, DOWNLOAD COMPLETE, & AUTOTEST SPLIT REPORT - AC FAILURE, LOW BAT, OPEN/CLOSE, & MAINT OPEN/CLOSE SECONDARY ENTRY DELAY TIME SECONDARY EXIT DELAY TIME LOOP RESPONSE TIME RESERVED

DEFAULT UNDEFINED UNDEFINED UNDEFINED UNDEFINED UNDEFINED UNDEFINED "0" "0" "0" "0" "0" "0" DISABLED "0" "0" "0" "0" "0" DISABLED "0" DISABLED "0" SUPERVISED "0" SUPERVISED "0" PHONE #1 "0" PHONE #1 "0" INSTANT "0" "0" 500 MS RESERVED
REMEMBER! AFTER ALL DATA HAS BEEN ENTERED, PRESS [2]-[2]-[0]-[#] TO STORE DATA IN EEPROM!
LOCATION 186-193 194-201 202-PAGE DESCRIPTION CONTROL PANEL ACCESS CODE CALLBACK PHONE NUMBER - DIGITS 1 - 8 CALLBACK PHONE NUMBER - DIGITS 9 - 16 ANSWERING MACHINE DEFEAT LOCAL PROGRAMMING LOCKOUT CONTROL PANEL SHUTDOWN DATA DEFAULT "0 0" "0" DISABLED "0" DISABLED "0" DISABLED "0" NOT LOCKED "0" CONTROL ON
LOCAL TELEPHONE COMPANY INTERFACE INFORMATION
TELEPHONE CONNECTION REQUIREMENTS Except for telephone company provided ringers, all connections to the telephone network shall be made through standard plugs and standard telephone company provided jacks or equivalent in such a manner as to allow for immediate disconnection of the terminal equipment. Standard jacks shall be so arranged that if the plug connected thereto is withdrawn, no interference to the operation of the equipment at the customers premises which remains connected to the telephone network, shall occur by reason of such withdrawal. INCIDENCE OF HARM Should terminal equipment or protective circuitry cause harm to the telephone network, the telephone company shall, where practical, notify the customer that temporary discontinuance of service may be required; however, where prior notice is not practical, the telephone company may temporarily discontinue service if such action is deemed reasonable in the circumstances. In the case of such temporary discontinuance, the telephone company shall promptly notify the customer who will be given the opportunity to correct the situation. The customer also has the right to bring a complaint to the FCC if he feels the disconnection is not warranted. CHANGES IN TELEPHONE COMPANY EQUIPMENT OR FACILITIES The telephone company may make changes in its communications facilities, equipment, operations, or procedures where such action is reasonably required and proper in its business. Should any such change render the customers terminal equipment incompatible with the telephone company facilities, the customer shall be given adequate notice to make modifications to maintain uninterrupted service. GENERAL The FCC prohibits customer provided terminal equipment be connected to party lines. IMPORTANCE OF THE RINGER EQUIVALENCE NUMBER The Ringer Equivalence Number of this device is 0.2 B. This number is a representation of the electrical load that it applies to your telephone line. MALFUNCTION OF THE EQUIPMENT In the event that the device should fail to operate properly, the customer shall disconnect the equipment from the telephone line to determine if it is the customers equipment that is not functioning properly. If the problem is with the device the customer shall discontinue use until it is repaired. EQUIPMENT INFORMATION MANUFACTURER OF CONNECTING EQUIPMENT: CADDX CONTROLS INC. FCC REGISTRATION NUMBER: GCQ4DC-17266-AL-E RINGER EQUIVALENCE: 0.2 B

SPECIFICATIONS

OPERATING POWER AUXILIARY POWER LOOP RESISTANCE BUILT-IN SIREN DRIVER LOOP RESPONSE OPERATING TEMPERATURE KEYPAD DIMENSIONS
16.5 VAC 25 VA Transformer 12 VDC 500mA 300 Ohms Maximum 2-tone (Steady and Yelp) Selectable to 500mS 32 to 120 degrees F 5.50" Wide 4.25" High.850" Deep 11.25" Wide 11.25" High 3.50" Deep 9 lbs.
METAL ENCLOSURE DIMENSION

SHIPPING WEIGHT

FIVE YEAR LIMITED WARRANTY
CADDX CONTROLS, INC. GUARANTEES THIS PRODUCT AGAINST DEFECTIVE PARTS AND WORKMANSHIP FOR TWENTY-FOUR (24) MONTHS FROM DATE OF MANUFACTURING. IF ANY DEFECT APPEARS DURING THE WARRANTY PERIOD RETURN IT TO CADDX, POSTAGE PREPAID. THE UNIT WILL BE REPAIRED AND RETURNED. FOR THE REMAINING 36 MONTHS OF WARRANTY, THE UNIT WILL BE REPAIRED FOR A FEE NOT TO EXCEED $10.00 PLUS SHIPPING AND HANDLING. CADDX ASSUMES NO LIABILITY FOR CONSEQUENTIAL OR INDIRECT DAMAGE AND ACCEPTS NO RESPONSIBILITY FOR REPAIRING DAMAGE TO THE PRODUCT CAUSED BY MISUSE, CARELESS HANDLING, OR WHERE REPAIRS HAVE BEEN MADE BY OTHERS. NO OTHER GUARANTEE, WRITTEN OR VERBAL, IS AUTHORIZED BY OR ON BEHALF OF CADDX CONTROLS, INC., GLADEWATER, TEXAS.
CADDX CONTROLS, INC. 1420 NORTH MAIN STREET GLADEWATER, TEXAS 75647 TOLL FREE 800-727-2339 FAX 903-845-6811
8600 INSTALLATION MANUAL 8600II98 REV I (08-01-98)

 

Tags

STR-DE595 MP 2550 FWD-32LX1R Neonumeric NM6 PRO 4220 PS42A410c1D SA10003 CTK-495 Sanyo S750 Abit SA6R KX-F700C L19H01CB 15LB450S X-845 15LD3200 ROC5209 Driver Sydney SD27 Euromac D380 Monster-1999 VGN-N21e-W Vl 125 Dvdr990-051 NAD C270 BIG 44 1200 Scan Review Liebherr SGN Auto-vice City LG500 P4S800D Bvts4 CD2502S 05 740BF NV-HS825EE Smartphone Econoline HBH-PV708 Smartphones XV320P DEH-3900MP CK450 CS-50 DV-686A-S ES-8249 Smart 775VM800 Explorist XL 10FF2M4 Communicator CDP-307ESD CLX-2160-XEU WPC54GS Tungsten T3 Invigorator HTS5310S 817200 VSX-23TXH Icom AH-2 Aspire 7736 WDI1440EE EFG20 Polaroid M630 Player NP-R530-js05ES 865 DWD-14120FD Royale 2 1600LE EW1170C MDD72 Alcatel 4400 Axis 207 MP-300 VSX-C501 Ixus V 4014NV FE1024N MS-192W AVR-484 HDA-5460 Unique Aquaspeed Fishmark 500C DVP-NS708H SGH-D780 Roland FP-8 42LB2DE Imageclass D880 Photosmart 1100 240V Cowon V5 RS-615US VN-3100PC ESL6115 DCS 500B S234I F86080VI Xperia X10 GPS 95XL ZC510

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101