1. Insert mounting bracket into the dashboard, and bend the mounting tabs out with a screwdriver. (Make sure that lock lever is flush with the mounting bracket. Not projecting outward) 2. Secure the rear of the unit After fixing mounting bolt and power connector, fix the rear of the unit to the car body by rubber cushion. 3. Insert trimplate

Pagina 3

WIRING

DIAGRAM-AUDIO/VIDEO

CONNECTIONS

Pagina 4

WIRING DIAGRAM-POWER/SPEAKERS (ISO + SMALL CONNECTOR)

Pagina 5

PA N E L O P E N / C L O S E O P E R AT I O N
This unit is equipped with the most advanced full logic motorized slide down system.You can enjoy this advance technology with just a single press of the OPEN button Please read carefully the following operation instruction before operating the unit. OPEN / CLOSE THE PANEL Press the Open button to slide down (open) a closed panel or to slide up (close) an opened panel. LOADING A CD When the panel is in the slide down position, the disc slot becomes accessible. Insert a CD through the disc slot, the CD will be automatically loaded and the panel will also close automatically & playback will begin. If no CD is inserted, press Open button again to slide up(close) the panel. EJECTING A CD Press Open button to slide down the panel, if a CD is loaded, it will be ejected automatically. No further key press is needed. If the ejected CD is not being removed, after 10 seconds it will be reloaded automatically. And the panel will automatically slide up after disc has been reloaded.Warning : If the ejected disc remains in the slot, the Open button will not function, so closing the panel by using Open button is prevented unless the disc is removed or reloaded. CAUTION A) Please always use the OPEN button to slide up/ down the front panel. Please never try to slide up or down the front panel manually, this will cause serious & permanent damage to the slide down mechanism, and this will void the warranty. B) Please do not try to detach / remove the front panel ( by pressing the detach button ) or attach the front panel when the panel is in the slide down position.This may cause serious & permanent damage to the unit & panel. Only attach or detach the front panel when the panel is in the slide up position.

Pagina 6

CONTROL

PA N E L

FUNCTION

Pagina 7

REMOTE

FUNCTIONS

Pagina 8

Pagina 9

B A S I C O P E R AT I O N S
3) PANEL RELEASE BUTTON (REL) Press this button to remove the control panel. 1) POWER ON/OFF BUTTON Long press the POWER button or Short Press any other button on the front of the unit (except the Open/Eject) to turn On the unit. Long press the POWER button to turn Off the unit. 1) MUTE BUTTON Short Press the MUTE button to mute the audio output, and Mute will appear on the display. Press the mute button again to restore the audio output to the previous level. Please refer to the related description in Audio Operation of Sub-woofer for details operation of the Subwoofer control ! The Subwoofer Level and Low Pass Filter control will only appear in the Audio Menu only if the Subwoofer function is currently activated 'On. 8) SUB-WOOFER (SUB-W) Long Press the SUB-W button to activate the Sub-woofer function On, and Sub-woofer will appear on the LCD display for 3 seconds. press the SUB-W button again to turn off the Sub-woofer function. 10) iX-BASS BUTTON (iX-Bass ) Long Press the iX-Bass button to turn on the IX-Bass function, and iX-Bass will appear in the LCD display for 3 seconds. Press the iX-Bass button again to turn off the IX-Bass function Please refer to the related description in Audio Operation of iX-Bass for details operation of iX-Bass control The IX-Bass Boost Level control will only appear in the Audio Menu only if the iX-Bass function is currently activated 'On. 5) MODE BUTTON (MODE) Short Press the MODE button to select a different mode of operation as indicated on the display panel. Available modes include Tuner, DVD, Card(SD/MMC Card), AV IN-1 and AV IN -2 6) ENCODER VOLUME BUTTON To increase the volume, rotate the volume control knob clockwise.To decrease the volume, rotate the volume control knob counter clockwise.When the volume is adjusted, the volume level is shown on the display panel as a number ranging from 00 (lowest) to 46 (highest). FRONT PANEL A/V IN JACK The unit is allowed to connect with external Audio / Video system such like Digital Camera or Game Console.You can connect the external A/V system through the A/V in jack on front panel. After connect with external A/V system, pressing mode to A/V In to enjoy this external A/V system on this unit.

Pagina 11

DATE SET Once in Date Set mode, User can use the Encoder Vol Knob to adjust the Date / Month / Year. Short press the AUDIO button to confirm the entry and move to the next entry. CLOCK The time of the clock is set to 12:00 by default. User can adjust the time by rotate the Encoder Vol knob clockwise to adjust the minute and rotate the Encoder Vol knob anticlockwise to adjust the hour. If the unit is equipped with the OPTIONAL RDS Function, the clock will be automatically updated by the RDS roadcasting, provided if the RDS broadcast does include the clock information ( RDS CT FUNCTION ) TIME FORM "12H" is the default setting. User can use the Encoder Vol Knob to choose the Time Format between 12 Hours & 24 Hours AV JACK The panel AV Jack is default as AV In source. User can use the Encoder Vol Knob to select OUT. Once OUT is selected, the panel AV jack is changed as an AV OUTPUT ( AV OUT ) of the Audio / Video Signal of this unit's Built-in DVD player. This AV Out selection is useful for user by simply plug and connect to any external TFT system without any extra installation. CAMERA OFF is set as default. If user connected a back up camera system to this unit, user should choose Camera ON mode. Once ON is selected, & the vehicle is in Reverse Gear ( Backup mode ), the front in-dash TFT display will automatically switch to Back Up Camera Video signal regardless whatever mode is currently displayed on the front in-dash TFT. If connected to a back up camera system but this option is selected to OFF mode, User still can press the mode button to switch AV In 1 to display the Back Up Camera Video on the front in-dash TFT. TUNER SET User can use the Encoder Vol Knob to select between Local or Distance mode.This feature is used to designate the strength of the signals at which the radio will stop during automatic tuning. "Distance" is the default setting, allowing the radio to stop at a broader range of signals.To set the unit to select only strong local stations during automatic tuning, rotate the Encoder Vol Knob button until "Local" appears on the display. TUNER AREA User can use the Encoder Vol Knob to select the frequency spacing which is most appropriate for the area this unit is used in, U.S.A. South America, Europe or Oirt. (Russia Band) BEEP TONE The beep tone feature allows the selection of an audible beep tone when a button is pressed. "BEEP TONE On" is the default setting. Rotate the Encoder Vol Knob to select the "BEEP TONE Off" option PROGRAMMABLE TURN-ON VOLUME (VOL PGM) This option allows the adjustment of the volume level of the radio will automatically assume when turning on. "VOL PGM 12" is the default setting.To program a specific turn on volume level, use the Encoder Vol Knob to select "VOLUME LEVEL within 5 seconds. REAR SPEAKER ON/OFF (REAR SPK) Rear speaker is set to 'ON' by default. If OFF is selected, the rear speaker's audio output will be TURNED OFF.This function is useful while listening with the HEADPHONE and user doesn't need Rear Speakers sounds output through rear speakers. Select ON to reactivate the rear speakers sound output :When the Rear Speaker is 'OFF', the Audio Function, 'FADER', will not be functional INTER AMPLIFIER ON/OFF(INTER AMP) This is a option selection for user to turn the unit's built-in Amplifier system on or off. OFF is the default setting.This option is useful for user if connected to an external Amplifier & the user does not want audio output of the built-in amplifier system.

AU D I O O P E R AT I O N
AUDIO MENU Short Press AUDIO button to access the Audio Menu. User can navigate thru the Audio Menu items by pressing the / AUDIO button repeatedly, or by pressing the Tuning Up or Tuning Down Button. Once the desired menu item appears on the display, adjust that option by using the encoder volume knob within 5 seconds.The following menu items can be adjusted as described above.The unit will automatically exit the Audio Menu after five seconds of inactivity. SUBWOOFER Sub-woofer (Level) User has 5 seconds to use the encoder volume knob to adjust the Sub-woofer lever from '00' to The Sub-woofer level control is only applicable if the unit is equipped with the optional subwoofer line out, and only if the unit is connected to an optional sub-woofer speaker. The Sub-woofer level control option will only appear in the Audio Menu if the Sub-woofer function is activated ON by pressing the Sub-w button on control panel.

Pagina 13

Sub-woofer Low Pass Filter (LPF) User has 5 seconds to use the encoder volume knob to select the 4 different Low Pass filter Flat, 80Hz, 120Hz or 160Hz. The Sub-woofer LPF control is only applicable if the unit is equipped with the optional subwoofer line out, and only if the unit is connected to an optional sub-woofer speaker. The Sub-woofer LPF option will only appear in the Audio Menu if the Sub-woofer function is activated by pressing the Sub-w button on control panel. X-BASS User has 5 seconds to use the encoder volume knob to select the 3 different Bass Boost level: Low, Mid, or High.
BASS LEVEL(Level) User has 5 seconds to use the encoder volume knob to adjust the desired Bass level range from -6 to +6. BASS -CFQ (C.Frq). User has 5 seconds to use the encoder volume knob to adjust the desired Bass Center Frequency to 60Hz, 80Hz, 100Hz, or 200Hz. BASS-Q: (BassQ) User has 5 seconds to use the encoder volume knob to adjust the desired Bass Quality Factor to 2N, 1N, 1W or 2W. Figure 1 shows the Bass Quality factor (Curve characteristics) of each step.

MIDDLE

MIDDLE (LEVEL) User has 5 seconds to use the encoder volume knob to adjust the desired Middle level range from -6 to +6. MIDDLE-CFQ (C.FRQ) User has 5 seconds to use the encoder volume knob to adjust the desired Middle Range Center Frequency to 500Hz, 1KHz, 1.5KHz, or 2.5KHz. MIDDLE-Q (MID-Q) User has 5 seconds to use the encoder volume knob to adjust the desired Middle Quality Factor to 2N, 1N, 1W or 2W. Figure 2 shows the middle Quality factor (Curve characteristics) of each step.

Pagina 14

TREBLE
TREBLE (LEVEL) User has 5 seconds to use the encoder volume knob to adjust the desired Treble level range from -6 to +6. TREBLE CFQ (FREQ) User has 5 seconds to use the encoder volume knob to adjust the desired Treble center frequency to 10KHz, 12.5KHz, 15KHz, or 17.5KHz. BALANCE User has 5 seconds to use the encoder volume knob to adjust the Balance between the right and left speakers from R12 (full right) to L12 (full left). C00 represents an equal balance between the right and left speakers. FA D E R User has 5 seconds to use encoder volume knob to adjust the Fader between the front and rear speakers from R12 (full rear) to F12 (full front). C00 represents an equal balance between the front and rear speakers.

T U N E R O P E R AT I O N
19)BAND BUTTON (BAND) Press BAND to change between FM bands and AM(MW) bands.
20&21)TUNING UP/DOWN BUTTON (
MANUAL TUNING Press the Up Tuning( ) or Down Tuning ( up or down by one step. AUTO SEEK TUNING Press the Up Tuning ( )or Down Tuning (
)button for more than 3 seconds to move the radio frequency number
)button for less than 3 seconds to move to next station automatically.
12~17)PRESET STATIONS BUTTONS Six numbered preset buttons store and recall stations for each band. 11)AUTOMATICALLY STORE / PRESET SCAN (AS/PS) Automatically select 6 strong stations and store them in the current band. Select a band (if needed). Press AS/PS button for more than three seconds.The new stations replace stations already stored in that band. PRESET SCAN Scan stations stored in the current band. Select a band (if needed). Press AS/PS button for less than 3 seconds.The unit will pause for ten seconds at each preset station. Press AS/PS button again to stop scanning when the desired station is reached. STEREO The unit will automatically pick up a stereo signal when available.When in stereo mode, the ST icon appears in the display. When no stereo signal is available, the unit will automatically revert to mono operation, and no icon will be displayed.

R D S O P E R AT I O N

RDS FUNCTIONS The unit is equipped with the following RDS function: - AF Alternative Frequencies - CT Clock Time - EON Enchanced other Network - PI Program identifications - PS Program service name - PTY Program Type - REG Regional Change - TA Traffic Announcement - TP Traffic program 1. AF FUNCTION By pressing AF button < 3 seconds to select AF ON/OFF.AF icon will light up on the LCD. Under AF On mode, if the tuned in station signal is getting weak, the unit will automatically switches to a different frequency on the same network with stronger signal. Factory Default setting is AF ON

Pagina 15

2.TA FUNCTION By pressing TA button < 3 seconds, to switch on TA standby mode.The TA icon will light up on the LCD. In the stand by mode, when a traffic announcement broadcast starts, the traffic announcement broadcast will be received as top priority regardless of the function mode.When a traffic announcement starts,TRAFFIC INFO will show on the LCD, press the TA button can cancelled the broadcast reception while a traffic announcement broadcast is being received.The unit will go back to the previous mode and TA goes into stand by mode again.When the TP icon is not light up for 60 seconds.A beep Alarm tone is heard and the LCD will show Lost TP,TA.TA seek will automatic activate and searches to another TA station. 3. PTY FUNCTION Pressing PTY(TA) button more than 3 seconds to go into PTY select mode.The user now has 5 seconds to select the desired PTY item by using encoder volume knob. Once selected the PTY item, user have 5 seconds to press AUDIO/CENTER or TUNE UP (>>)or TUNE DOWN (<<) buttons < 3 seconds to seek for the selected PTY item. The LCD will display PTY SEEK. If no station with the selected PTY broadcast can be received, the LCD will display No Match PTY for 5 seconds then returns to the previous mode. User can store his favorite PTY into the preset memory M1 to M6. After selected a PTY item, long press any one of the preset memory button can store the selected PTY.To recall the stored PTY item switch on PTY mode then press preset memory < 3 seconds, the unit will automatically search the stored PTY station in the preset memory

Factory default stored for PTY preset memory: M1/News, M2/Information, M3/Pop Music, M4/Sports, M5/Classics, M6/Finance.

C D O P E R AT I O N

AUDIO CD OPERATION - TFT MONITOR When a Audio CD is inserted into the player and the following picture will appear on the TFT monitor.

Pagina 16

AUDIO CD OPERATION - REMOTE CONTROL To operates CD function through the following keys on the remote control.
17. 18. 14. 15. 8~9 19~29 32. 10~13 16. 7.
PAUSE / PLAY BUTTON STOP NEXT BACK FAST FORWARD & FAST BACKWARD NUMERIC BUTTONS REPEAT UP/DOWN/LEFT/RIGHT BUTTON OK BUTTON RANDOM BUTTON
17) PAUSE/ PLAY BUTTON ( / M1) 1. Press PAUSE to pause playback (still mode).The sound from the disc is muted during still mode. 2. Press PLAY to resume normal playback. 18) STOP( ) 1. Press STOP to stop playback and show the logo screen.The player memorizes the location where playback is stopped. 2. Press PLAY to resume playback from the location where playback is stopped (DVD,VCD 1.1,VCD 2.0 and audio CD). 3. Pressing STOP twice is resume playback from the beginning of the disc. 14) NEXT( ) Press NEXT to skip forward to the beginning of the next chapter. 15) BACK( ) Press BACK to skip backward to the beginning of the previous chapter. 8~9) FAST FORWARD& FAST BACKWARD( or ) 1. Press FAST FORWARD to fast forward through the disc. Each time the button is pressed,a new speed (2X, 4X, 8X or 20X) is selected. 2. Press PLAY to resume normal playback. 3. Press FAST BACKWARD to fast reverse through the disc. Each time the button is pressed, a new speed (2X, 4X, 8X or 20X) is selected. 4. Press PLAY to resume normal playback. The fast forward/backward speed may differ depending upon the disc. 19~29) NUMERIC BUTTONS 1.When playback CD/MP3/WMA use for track number or File number direct access and use when function need numeric Selection or Input, like in the Goto function,etc. 2. Use when playback DVD which need numeric Selection or Input, like in the Goto function,etc 32)REPEAT Press REPEAT button less than 3 seconds to repeat play the current song.And keep on repeat Playing the current song until the repeat play is disabled.To disable current song repeat play, press REPEAT button less than 3 seconds 10~13)UP/DOWN/LEFT/RIGHT BUTTON ( Use to move cursor up/down/left/right. / / / )

Pagina 17

16)OK BUTTON Use this button to confirm the selection. 7) RANDOM BUTTON RANDOM button less than 3 seconds is random play all songs on the disc.To disable all file random play, press RANDOM button less than 3 seconds.

AU D I O C D O P E R AT I O N - C O N T RO L PA N E L The following functions are available operated through the control panel.
TRACK SELECT Press the TRACK UP ( ) or TRACK DOWN ( ) button for less than one second to advance to the next track on the CD,The selected track number will appear on the display. Press and Hold TRACK UP ( ) or TRACK DOWN ( ) button for more than one second to fast forward or fast reverse through the disc. CD play starts when the button is released. When the last track playback completed, the unit will automatically enter into STOP mode. User can press play button to start the CD playback again when in the STOP mode. 12) PAUSE/ PLAY BUTTON (1 ) 1. Press PAUSE to pause playback (still mode).The sound from the disc is muted during still mode. 2. Press PLAY to resume normal playback. 13)STOP BUTTON (2 STOP) 1. Press STOP to stop playback and show the logo screen.The player memorizes the location where playback is stopped. 2. Press PLAY to resume playback from the location where playback is stopped (DVD,VCD 1.1,VCD 2.0 and audio CD). 3. Pressing STOP twice is resume playback from the beginning of the disc. 14)REPEAT BUTTON (3 RPT) Press REPEAT button less than 3 seconds to repeat play the current song And keep on repeat Playing the current song until the repeat play is disabled.To disable current songrepeat play, press REPEAT button less than 3 seconds 15)RANDOM BUTTON (4 RDM) Press RANDOM button less than 3 seconds is random play all songs on the disc.To disable all songs random play, press RANDOM button less than 3 seconds.

Pagina 18

M P 3 / W M A O P E R AT I O N
MP3/WMA Operation-TFT Monitor When a MP3/WMA disc is inserted into the player and the following picture will appear on the TFT monitor.
The player automatically plays the first track.The elapsed time within the track is displayed on the right side of the top line.When the track is finished, the second track will begin playing, and the track number on the top line will be updated. Press STOP to stop playback of the current file
MP3/WMA OPERATION - REMOTE CONTROL To operates CD function through the following keys on the remote control. SELECTING A TRACK TO PLAY 1. Use the UP/DOWN/LEFT/RIGHT direction buttons to move to different file numbers. 2. Press the RIGHT direction button when the highlighted file is in the column on the far right, and up to five more file in the current directory will be displayed. 3. Press the LEFT direction button when the highlighted file is in the column to the far left, and the previous five file will be displayed. 4. Press OK on a file number, and that file will begin to play, or by direct numeric input, 5. Enter a file number with the numeric buttons (0-9) and +10 button to play the input Files Number. 17) PAUSE/ PLAY BUTTON ( / M1) 1. Press PAUSE to pause playback (still mode).The sound from the disc is muted during still mode. 2. Press PLAY to resume normal playback. 18)STOP( ) 1. Press STOP to stop playback and show the logo screen.The player memorizes the location where playback is stopped. 2. Press PLAY to resume playback from the location where playback is stopped (DVD,VCD 1.1,VCD 2.0 and audio CD). 3. Pressing STOP twice is resume playback from the beginning of the disc.

Pagina 22

19 ~29) NUMERIC BUTTONS 1.When playback CD/MP3/WMA use for track number or File number direct access and use when function need numeric Selection or Input, like in the Goto function,etc. 2.When playback DVD use when function need numeric Selection or Input, like in the Goto function,etc 30A) DVD MENU 1. Press DVD MENU to invoke the menu screen included on the DVD disc (DVD only). 2. Press direction buttons to highlight a selected menu entry. 3. Press OK or PLAY to select the highlighted entry. If the highlighted entry indicates a chapter or title, the disc will play from the selected spot. 30B). PBC (PLAY BACK CONTROL) (FOR VCD DISC ONLY) 1. Press DVD MENU to enable/disable PBC functionality with VCD 2.0 discs. PBC must be enabled for menu navigation. 2. Press a number on the number pad to select a track to play(VCD 2.0 only). 3. Press OK to make the selection. 4. Press DVD MENU for the main menu. 34)OSD BUTTON 1. Press OSD button once to display the amount of time played and time remaining to be played on the disc. For example, the OSD may display:
2. Press OSD button a second time to additionally display the disc type, current chapter (DVD) or track (VCD, audio CD), and total number of chapters or tracks. Also displayed (for DVD only) is the current title, total number of titles, audio language/type/# of channels, subtitle language, and angle selection. For example, the OSD may display:
3. Press OSD button a third time to make the OSD disappear. Press OSD button in DivX file will display the file name, DivX version, file size and frame rate. 35) GOTO BUTTON Using GOTO to Jump to a Specific Time, Chapter/Track, or Title 1. Press GOTO to enable the GOTO Menu.The OSD will display the following:
2. Press the UP/DOWN direction buttons to select the type of search: time search or Chapter/track/title search. - Select Time to jump to a spot on the disc and enter the time in units of hours, minutes, and seconds (hh:mm:ss):

Pagina 23

- Select "Title/Chapter" to jump to the beginning of a specific chapter within a specified title (DVD only) and enter the title and chapter numbers with the number pad and LEFT/RIGHT direction buttons, as follows:
- Select "Track" to jump to the beginning of a specific track within a non-DVD disc and enter the track number with the number pad, as follows: 33) ZOOM BUTTON 1. Press ZOOM during normal, slow, or still playback. 2. Pressing the ZOOM button repeatedly increases the magnification level.Three magnification levels are supported. On each press of ZOOM, the OSD will flash the following:

3. Pressing the direction buttons causes the zoom point to shift, allowing the zoomed image to be panned
1) Some discs may not respond to the zoom feature. 2) Zooming does not work on subtitles or menu screens included on DVDs. 3) The magnification level and number of available levels vary, depending on the TV TYPE selection in the Setup Menu. 37) TITLE 1. Press TITLE to invoke Title Menu (DVD only, dependent on authoring of disc). 2. Press direction buttons to highlight selected Title Menu entry. 3. Press OK or PLAY to select the highlighted entry. If the highlighted entry indicates a title, that title will play from Chapter 1. 36) SUBTITLE Press SUBTITLE during playback to turn on/off subtitles and to change the subtitles (DVD only).The OSD indicates the current setting, giving the subtitle track number and the language selected, for example:
1) The first press will show the current subtitle setting selected; subsequent presses toggle to the next subtitle setting. 2) Some DVDs display subtitles automatically and cannot be turned Off, even if the subtitle function is set to Off. 3) During some scenes, the subtitles may not appear immediately. 4) Some DVDs allow subtitle selections and turn subtitles on or off only via the disc menu. 5) When a disc is replaced, the Set Up returns to the default setting.

Pagina 24

38)DVD AUDIO Press DVD AUDIO during playback to change the audio language when playback a DVD disc.The OSD indicates the current setting by giving the audio track number, language, audio type, and number of channels. For example:
1) The first press shows the current language selected; subsequent presses toggle The next audio language 2) Some DVDs allow audio selection change only via the disc menu. 3) When a disc replaced, the Set Up returns to the default setting.

39) ANGLE

Press ANGLE while playing a scene recorded with multiple angles to change the angle (DVD only).The OSD indicates the current angle selected and the total available angles to select, for example:
1) The first press will show the current angle selected. Subsequent presses toggle to the next angle. 2) The TFT monitor will light its angle icon when angle changes are available. 3) Some DVDs allow angle changes only via the disc menu. 4) When a disc is replaced, the Set Up returns to the default angle.

DV D O P E R AT I O N - C O N T RO L PA N E L
Once a DVD disc is inserted into the unit, the unit will automatically start the playback from the beginning of the disc, and then the DVD MENU or ROOT or TITLE in the DVD disc will appear on the TFT monitor and ROOT will be displayed on the TFT of the unit. Under the DVD MENU or ROOT or TITLE is display on the TFT Monitor.The buttons of Track up / down (20 / 21) use as LEFT / RIGHT direction button, Encoder Volume Knob (6) as UP / DOWN direction button, and Audio (4) as OK button. 12.PLAY/PAUSE (1 ) 1. Press PAUSE to pause playback. 2. Press PAUSE to single step forward to the next picture in the video (DVD and VCD only). 3. Press PLAY to resume normal playback.

Pagina 25

13.STOP (2 STOP) 1. Press STOP to stop playback and show the logo screen.The player memorizes the location where playback is stopped. 2. Press PLAY to resume playback from the location where playback is stopped (DVD,VCD 1.1,VCD 2.0 and audio CD). 3. Pressing STOP twice is resume playback from the beginning of the disc. 20. NEXT( ) Press NEXT to skip forward to the beginning of the next chapter. 21. BACK( ) Press BACK to skip backward to the beginning of the previous chapter. 20/21. FAST FORWARD & FAST BACK FORWARD ( or ) 1. Long press FAST FORWARD to fast forward through the disc. Each time the button is pressed, a new speed (2X, 4X, 8X or 20X) is selected. 2. Press PLAY to resume normal playback. 3. Long press FAST BACKWARD to fast reverse through the disc. Each time the button is pressed, a new speed (2X, 4X, 8X or 20X) is selected. 4. Press PLAY to resume normal playback. 14.REPEAT (3 RPT) Press REPEAT button less than 3 seconds to repeat play the current file. And keep on repeat Playing the current file until the repeat play is disabled.To disable current file repeat play, press REPEAT button less than 3 seconds 15. DVD MENU (4 RDM) Press DVD MENU button less than 3 seconds to invoke the DVD MENU or ROOT on the DVD disc. Under the DVD MENU or ROOT or TITLE is display on the TFT Monitor.The button of Track up / down (20 / 21) use as LEFT / RIGHT direction button, Encoder Volume Knob ( 6 ) as UP / DOWN direction button, and Audio button ( 4 ) as OK button. 17.DVD AUDIO (6 <) Long press DVD AUDIO button during playback to change the audio language (DVD only).The OSD indicates the current setting by giving the audio track number, language, audio type, and number of channels. For example:

Pagina 27

D I V X O P E R AT I O N
The unit is support playback Divx files , the details operation as same as CD/MP3/WMA operation.The following are special functions for playback Divx File:
EXTERNAL SUBTITLE External Subtitle setting is used for choosing the language domain, (only for Divx).After selecting one language domain (alphabet), when playback a divx with external subtitle, the subtitle display will use this language alphabet. if you find the displaying subtitle words aren't correctly, please ensure the external subtitle language and select the correct language.The following language domains are available: Western European Central European Slavoic Cyrillic = Include Albanian, Breton, Catalan, Danish, Dutch, English, Faroese,Finnish, French, Gaelic, German, Icelandic, Irish, Italian, Norwegian, Portuguese, Spanish and Swedish. = Include Albanian, Croat, Czech, Dutch, English, German, Hungarian,Irish, Polish, Romanian, Slovak, Slovene and Sorbian. = Include Bulgarian, Belorussian, English, Macedonian, Moldavian, Russian, Serbian and Ukrainian.
The Divx Subtiltle selection is appear in the SET UP menu > language > Divx subtitle

DIVX DRM

GENERATING REGISTRATION CODE - Go to SETUP > RATING > Divx Registration. Press OK on the DISPLAY, the following screen will be displayed:
The XXXXXXXX is a random number for registration purpose. Select Done to confirm.

Pagina 28

- When trying to play a movie that was not purchased for this player (with the registration code above), the following screen will be displayed:
- When trying to play a limited views movie (rental), the following screen will be displayed:
A limited views management limits the number of times a user can view the rented movie. An expired error is displayed when this limit is reached, and the movie will not play again. Choose 'Yes' if you wish to use a rental view, or 'No' to abort. During the playback, you can press stop and resume the playback from the last position with the 'Play' button without using a new rental view.
A purchased or rented movie will play only on the player from which the registration number was issued.

Pagina 31

PRIORITY CONTENT While with DVD Audio disk, the user may define if the priority is to play the Audio content or the Video.The following options are available: PICTURE CD VIEW There are two options are available in Picture CD View. Original = Used to switch the picture size to the current display resolution directly. Fit to screen = Like letter box.Take the minimum value of horizontally fit scale ratio and vertically fit scale ratio.

AU D I O S E T T I N G S

1. Using the LEFT/RIGHT direction buttons, move to the Audio button and press OK.The player's Audio settings will appear:

2. 3. 4. 5. 6. 7.

Press the LEFT/RIGHT direction buttons to select the Audio button. Press OK to display the player's Audio settings. Press UP/DOWN direction buttons to select the setting to change. Press OK to display a list of the option. Press UP/DOWN direction buttons again to move among the displayed options. Press OK again to choose the option and change the setting.The following subsections explain the available options for each of the player's Audio settings.
DIGITAL OUTPUT SETTING (*This option is not available for MCD 773) Selecting the Digital Output setting allows the user to adjust the audio output on S/PDIF ports to work in harmony with the audio equipment (e.g. receiver, speakers) connected to the player.The following options are available: - PCM = A S/PDIF output is connected to a receiver that accepts PCM S/PDIF. - Bitstream = A S/PDIF output is connected to a receiver that accepts CDTS/ACS/ MP3/WMA/MPEG/PCM S/PDIF(factory defance) - Off = Digital audio output is disabled. DYNAMIC RANGE CONTROL SETTING Selecting the DRC setting allows the user to enable/disable the DRC.The following options are available: - On = DRC is On. - Off = DRC is Off (Factory default) R AT I N G S E T T I N G S C H A N G E 1. Using the LEFT/RIGHT direction buttons, move to the Rating button and press OK; the player's Rating settings will appear:

Pagina 32

2. Use the UP/DOWN direction buttons to select the setting to be changed.The following subsections explain how to change each of the player's Rating settings. PASSWORD SELECTION TO LOCK AND UNLOCK THE PARENTAL CONTROL RATING Selecting the Password Setting:Allows the user to enter a password, to lock and unlock the parental control rating setting into the player.The following options are available: - (Unlocked) = The parental control is unlocked and may be changed in the Rating selection (factory default) - (Locked) = The parental control is locked so no change may be made to the Rating selection - Locking the Password: Enter four digits using the number keys. Each number entered is overwritten by *.When all four have been entered, press the OK button.The locked icon ( ) will appear, and the password is saved in non-volatile memory. - Unlocking the Password: Enter the four-digit password using the number keys. Each number is overwritten by *.When all four ahve been entered, press the OK button.If the password was entered correctly, the unlocked icon ( )will appear, and the password is erased from memory. If the wrong password was entered no change will occur, and the user may attempt to enter the password again. 1) A password is always four digits. 2) If the password is forgotten, the "back-door" password 8888 will unlock the parental control. 3) See the explanation on Rating to see how locking and unlocking the password has an effect on the parental control. PARENTAL CONTROL RATING SELECTION Selecting a Rating allows the user to set the parental control feature of the player. Press the OK to cycle through the available options.The following options are available: Kid Safe = Only titles with a parental control setting of 1 are allowed to play G = Only titles with a parental control setting of 2 or less are allowed to play PG = Only titles with a parental control setting of 3 or less are allowed to play PG-13 = Only titles with a parental control setting of 4 or less are allowed to Play PG-R = Only titles with a parental control setting of 5 or less are allowed to play R = Only titles with a parental control setting of 6 or less are allowed to play NC-17 = Only titles with a parental control setting of 7 or less are allowed to play Adult = Allow any title to play (factory default). 1) Parental Control functions only if the DVD title has it encoded in its program. Parental control does not work for VCD or CD Audio. 2) Rating can only be changed if the password is unlocked ( ).Rating can not changed if the password is locked ( ).

Pagina 33

S P E C I F I C AT I O N
TFT SCREEN SECTION Screen Size: 3.5"(Measured Diagonally) Screen Type:TFT Liquid Crystal Display active matrix Resolution: 960 (W) x 324 (H) DVD / CD SECTION Compatible Disc/Format Signal to Noise Ratio Dynamic Range Frequency Response VIDEO SECTION Color System Video Output Video Input AUDIO SECTION Line out level Line out Impedance AUXILIARY INPUT SECTION Input Maximum Voltage Input Impedance GENERAL Fuse Operating Temperature Unit Mounting Angle
See Disc Note for more details description > 90 dB > 90 dB 20Hz to 20Khz +/-3dB
NTSC / PAL Composite 1.0 Vp-p (+/- 0.2) 75 - ohm Composite 1.0 Vp-p (+/- 0.2) 75 - ohm

2 Volt 200 ohm

1200 mV 4.7k ohm
15-Amp Mini ATM Type 0-C to 50-C < 30

Pagina 34

T RO U B L E S H O OT I N G
Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer.

MCD 085

INSTRUCTION MANUAL
Car Stereo MP3/WMA Player with PLL FM Stereo Radio Radio Data System with PTY AUX IN / USB / MMC / SD Card Input Bluetooth Mobile Phone 24 Function in 11 Flip Down and Detachable Front Panel System 4 (1-6)

LOCATIONS OF CONTROLS

19 (1-6)
4 (1-6) 1. POWER ON/OFF ( ) 2. FUNCTION SELECT BUTTON: CONTROLS FOR BASS/TREBLE/ BALANCE/FADER / INITIAL VOLUME / CT / TA VOL / EON / DSP 3. VOL UP/VOL DOWN BUTTON: CONTROLS FOR BASS/TREBLE/ 11 BALANCE/FADER / INITIAL VOLUME / CT / TA VOL / EON / DSP 4. PRESET STATIONS (1,2,3,4,5,6) 9 5. AF function (ALTERNATIVE FREQUENCIES) 20 6. TA function (TRAFFIC ANNOUNCEMENT) 7. PTY function (PROGRAM TYPE) 21 8. DISPLAY BUTTON (DISP) 22 9. MODE/LOUDNESS BUTTON (MD/LD) 5 10.BAND/ENTER BUTTON (BD/ENT) 11.AUTOMATIC OR MANUAL TUNING (FREQ UP OR FREQ DOWN ) TRACK/SEARCH BUTTON 2 12.AUTO SEEK SEARCH TUNING (A/PS) 13.SCAN AUTOMATIC TUNING CONTROL (SCAN) 14.MUTE BUTTON (MUT) 15.EQUALIZER (DSP) 16.LCD DISPLAY 4 (1,2,3,4,5,6) 27 (1,2.,9,0 *,#) 17.OPEN PANEL BUTTON ( ) 18.PAUSE BUTTON 4 (1,2,3,4,5,6) 19.REPEAT BUTTON 20.INTRO BUTTON (Preview all Tracks) 27 (1,2.,9,0 *,#) 21.RANDOM BUTTON 22, 23. FOLDER DOWN/UP (MP3/WMA Files only) 24.USB PORT 25.MULTI-MEDIA CARD (MMC) / SD CARD SLOT 26.AUX IN 27.PHONE NUMBER 28.ANSWER A CALL ( ) 29.END A CALL ( )

INSTALLATION

PRECAUTIONS Choose the mounting location carefully so that the unit will not interfere with the normal driving functions of the driver. Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight or hot air from the heater, or where it would be subject to dust, dirt or excessive vibration. Use only the supplied mounting hardware for a safe and secure installation. Be sure to remove the front panel before installing the unit. Mounting angle adjustment Adjust the mounting angle to less than 20. MOUNTING EXAMPLE Installation in the dashboard
Release screw and bracket
Bend these claws, if necessary
Note: Keep the release key in a safe place as you may need it in the future to remove the unit from the car.

TO SUPPORT THE UNIT

Dashboard
1. UNIT 2. RELEASE CASE 3. DASH BOARD 4. HEX NUT 5. LOCK WASHER 6. PLAIN WASHER 7. CAR BODY 8. REAR SUPPORT STRAP 9. TAPPING SCREW 10. M5 X 15 HEX BOLT
Detaching and attaching the front panel The front panel of this unit can be detached in order to prevent the unit from being stolen. FOLDING DOWN AND DETACHING/ATTACHING THE FRONT PANEL button (1) to OFF first. Before detaching the front panel, be sure to press the button, let the Front Panel arrive in horizontal position and detach the panel by pulling it Then press the towards you as illustrated.

< 10

Notes: Do not press the front panel hard against the unit when attaching it. It can be easily attached by pressing it lightly against the unit. When you carry the front panel with you, put it in the supplied front panel case. Do not press hard or give excessive pressure to the display window of the front panel when attaching it to the unit. CLEANING THE CONNECTOR Rear of The unit may not function properly if the connectors between the unit front panel and the front panel are contaminated with dirt. In order to prevent this from happening, detach the front panel by pressing the button and clean the connector from time to time. Clean the connector with a cotton swab together with contact cleaner as illustrated. Be sure to clean them carefully pin by pin and make sure not to damage the connecting points.

Main unit

Cotton Swab

ISO CONNECTOR

RCA Jack Line Out: Red (right) White (left)

ISO CONNECTOR ANTENNA CONNECTOR

BLUETOOTH ANTENNA

CONNECTOR A LINE OUT 4. MEMORY +12V L(WHITE) R(RED) 5. AUTO ANTENNA OUTPUT 7. +12V (TO IGNITION KEY) 8. GROUND Note: (connector A no. 7) must be connected by car ignition key in order to avoid that car battery being drained when the car will be not used for long period. CONNECTOR B 1. REAR RIGHT SPEAKER (+) 2. REAR RIGHT SPEAKER (-) 3. FRONT RIGHT SPEAKER (+) 4. FRONT RIGHT SPEAKER (-) 5. FRONT LEFT SPEAKER (+) 6. FRONT LEFT SPEAKER (-) 7. REAR LEFT SPEAKER (+) 8. REAR LEFT SPEAKER (-)

FUSE 10A

CONNECT TO EXTERNAL MICROPHONE
Maintenance FUSE REPLACEMENT If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after the replacement, there may be an internal malfunction. In this case, consult your nearest repair center. Warning Use the specified amperage fuse for each lead. Use of a higher amperage fuse may cause serious damage.

OPERATING INSTRUCTIONS

1. POWER ON/OFF ( ) By pressing this key, the unit is on or off. This unit is turned on by pressing any key. 2. FUNCTION SELECT BUTTON: BASS/TREBLE/BALANCE/FADER / INITIAL VOLUME / CT / TA VOL / EON / DSP 3. VOLUME UP/DOWN Turning VOL knob (right/left) to adjust VOL/BAS/TRE/BAL/FAD. To select other functions, press the VOL knob shortly until the desired functions are shown on the display. Figure 1 shows how to control functions that are selected using the VOL knob.
Fig. 1 Selection of sound control functions 1. VOL 2. SEL 3. BASS 4. TRE 5. BAL 6. FAD Increase or decrease the volume by turning VOL knob (right/left). These buttons can be used to adjust the BASS, TREBLE, BALANCE and FADER.

2 sec.

IN VOL

TA VOL

Press and hold VOL knob to adjust INIT VOL /CT/TA VOL/EON ON/DSP IN VOL: Can adjust Initial Volume level using this mode. ADJ: Can adjust clock time. Turn VOL knob clockwise to set hours and counter clockwise to set minutes. TA VOL: Can adjust TA Volume (The volume level when Traffic announcement is transmitted). EON: Can selected EON condition, ON or OFF. DSP: Can select DSP mode (Classic, Rock, POP, Flat)
4. PRESET STATIONS (1,2,3,4,5,6) When pressed momentarily, these keys select a preset station directly. When pressed longer than 1 sec., current station is stored in preset memory bank. USING THE RDS FUNCTION What is RDS? The RDS (Radio Data System) is a digital information system developed by the EBU (European Broadcast Union). Piggy-backed on normal FM broadcasts, RDS offers a variety of information services and automatic retuning functions for RDS-compatible car stereos. In 1988, RDS became available in the United Kingdom, France, West Germany, Ireland and Sweden. Test transmissions are being conducted in many other European countries. It is expected that RDS will be available in most western European countries in the near future. 5. AF/REG function (ALTERNATIVE FREQUENCIES) When pressed momentarily, AF/REG switching mode is selected. When AF/REG switching mode is selected, the radio checks the signal strength of the AF all the time. When pressed long, it is activated as regional mode ON/OFF. Regional mode ON: AF switching or PI SEEK is implemented to the station which have all PI codes same as current station. REG segment is turned on, in LCD display. Regional mode OFF The regional code in the format of PI code is ignored when AF switching or PI SEEK is implemented. 6. TA function (TRAFFIC ANNOUNCEMENT) When pressed momentarily, it is activated as TA mode on or off When TA mode is on and traffic announcement is transmitted If the volume level was under the threshold point, it will be raised to the threshold point. When TP station is received, TP segment is turned on in LCD display.

7. PTY function (PROGRAM TYPE) When pressed momentarily, it is activated as TPY ON/OFF function and start to search corresponding PTY information then stops if the corresponding PTY information is detected. By pressing this key longer than 2 sec., you can select PTY mode by turning Volume knob as below. NEWS--AFFAIRS--INFO--SPORT--EDUCATE--DRAMA--CULTURE--SCIENCE--VARIED--POP--ROCK--EASY M-LIGHT M--CLASSIC--OTHER M--WEATHER--FINANCE--CHILDREN--SOCIAL--RELIGION--PHONE IN--TRAVEL-LEISURE--JAZZ--COUNTRY--NATION. M--OLDIES--FOLK M--DOCUMENT--TEST--ALARM.
8. DISPLAY (DISP) Press DISP button to switch between display informations such as radio frequencies, clock, track and other informations depending on the playing MODE. 9. MODE/LOUDNESS BUTTON (MD/LD) By pressing this key, user can select. AUX/TUNER/USB/SD/MMC/AD2P mode. LOUDNESS: By pressing this key longer than 2 sec., you can select LOUDNESS mode. 10. 11. BAND BUTTON (BD) Each band is toggled cyclically by pressing this key FM1---FM2---FM3. AUTOMATIC OR MANUAL TUNING (FREQ UP OR FREQ DOWN ) (A) RADIO MODE When pressed momentarily, these keys are operated as SEEK tuning mode. When pressed longer than 1 sec., they are operated as MANUAL tuning mode. (B) MP3/WMA PLAYER MODE When pressed momentarily, they are operated as TRACK UP or TRACK DOWN mode. When pressed longer than 1 sec., they are operated as CUE or REVIEW mode.
12. AUTO SEEK SEARCH TUNING (A/PS) PS - By pressing shortly, the radio searches for each preset station. Each preset station will be played for 5 sec. AS - By pressing longer than 1 sec, the 6 strongest stations are stored in the corresponding preset memory number. When Automatic Scan operation is finish, the radio executes the preset scan. 13. SCAN AUTOMATIC TUNING CONTROL (SCAN) Press SCAN button to activate radio scan. The unit will search for every station and will play 5 seconds of each station found. To cancel SCAN, press the button once more. 14. MUTE BUTTON (MUT) Press this button to turn off the sound. Press it again to return to the previous volume level. 15. EQUALIZER (DSP) Press DSP to select between (Classic, Rock, POP, Flat) equalizer modes. 16. LCD DISPLAY The Liquid Crystal Display will display the current state of the unit. 17. OPEN THE FRONT PANEL Press button and the front panel will open.

MP3/WMA CONTROL LOCATION OF PARTS
TRACK/SEARCH BUTTON (11) FORWARD AND REVERSE TRACK SEARCH (or changing songs) Press the SKIP button ( or ) during play to go to the desired track(song).REVERSE .FORWARD Press and hold the SKIP button ( or ) during play to scan at high speed. When the desired music section is found, release the button. Normal play will resume. 18. PAUSE BUTTON During PLAY, press (18) PAU button to PAUSE. Press it again to resume play. 19. REPEAT BUTTON When this button is pressed, RPT indication is displayed and play of the selected track will be continually repeated until the Track repeat mode is cancelled by pressing RPT button again. 20. INTRO BUTTON (Preview all Tracks) When this button is pressed, INT indication is displayed and the first several seconds of each track is played. Press again to stop intro and listen to track. 21. RANDOM BUTTON When this button is pressed, RDM indication is displayed and each track is played in random instead of normal progression. To cancel RANDOM mode, press RDM button again. 22, 23. FOLDER DOWN/UP (In case of MP3/WMA files) M5: Folder down / M6: Folder up
HOW TO SELECT MP3/WMA FILES
1. 2. 3. Searching by Track: Press A/PS, then search track is activated. Turn VOL knob to left or right, select first digit desired. Press VOL knob, then the first digit is fixed and second digit will flash. Turn VOL knob to left or right, select 2nd 3rd respectively. Press BD/ENT, the song selected will start. Searching by Character: Press A/PS twice, then character search mode is activated. Turn VOL knob to left or right, you can select the desired letter. Press VOL knob, repeat steps above for 2nd 3rd character. The songs with the same character that you selected is displayed. Turn VOL knob to left or right, you can select the desired song. Press BD/ENT, then the song selected will start. Searching by File Name: Press A/PS 3 times, then folder search is activated. Turn VOL knob to left or right, you can select the desired folder. Press BD/ENT, then the folder is fixed and the first file will be played.
24, 25. USB/SD/MMC Memory Card The device is equipped with a USB interface and a memory card reader for SD/MMC cards. MP3 or WMA files stored on these media can be played. 1. Plug your USB storage medium into the USB port. 2. If you use a memory card, insert it into the memory card reader. 3. The player automatically switches to the input used and starts playback. 4. See the section on operations common for audio files on how to control USB or memory card playback. Note: Due to the great variety of devices with USB and SD/MMC card interfaces that sometimes have manufacturerspecific functions, we cannot guarantee that all media will be recognized and that all operational functions will be available with this device. You cannot operate USB hard drives on the device. 26. Connecting AUX IN An external audio source (e.g. portable MP3 player) can be connected to the AUX IN socket to be played back by the vehicle loudspeakers. Connect the AUX IN socket with the audio output of the external device.

How to Perform Pairing Before you can dial out from the car stereo, you must first perform PAIRING. Pairing is a procedure used to connect 2 Bluetooth devices together. 1.This units Bluetooth function is always on, perform the pairing starting from your cellular phone. Refer to your cellular manual on proper pairing. 2.Perform the search for available Bluetooth devices, CAR--BT will show. Enter 0000 when asking for code. 3.After successful pairing, connect to the head unit if it is not automatically connected. How to call / receive calls using wired remote controller When there is incoming call, press TALK button once to answer. During conversation, press TALK button once to end call. To make calls using call history 1. Press and hold TALK button to display REDIAL history. 2. Using VOL knob on main unit, turn repeatedly to select the phone number you want to make call to and press to dial out. Note: Up to 20 phone numbers will be displayed including previous outgoing and incoming calls.

TALK BUTTON

HOW TO USE BLUETOOTH IN YOUR CAR AUDIO
How to call / receive calls using wireless remote controller To make calls, press button on the remote controller followed by pressing TEL NO using number keys. MICROPHONE After entering TEL NO, press again to dial out. During conversation, press button to end call. When there is incoming call, press button to receive call. Press button to reject incoming calls. How to make / receive calls using front panel To make calls using call history 1.Press and hold to display REDIAL history. 2.Using VOL knob on main unit, turn repeatedly to select the phone number you want to make call to and press to dial out. EN-
button to end call. During conversation, press When there is incoming call, press button to receive call. Press button to reject incoming call. Audio Streaming 1.If your phone is A2DP format is compatible, you can play music in your mobile and the music will be transferred to car audio unit. 2.Make sure your mobile and the car radio unit is paired and connected. 3.Play the music in your mobile according to your mobile operating method. 4.Unit will display A2DP when receiving A2DP music automatically, but for some mobile your have to press LD/MOD button to change A2DP mode. 5.You can press or on head unit for previous or next tracks.

Reset button is placed on the housing. The reset button is to be activated for the following reason: Initial installation of the unit when all wiring is completed. All the function button do not operate. Error symbol on the display.

TECHNICAL SPECIFICATIONS

MP3/WMA PLAYER SECTION Signal to Noise Ratio Channel Separation Frequency Response TUNER (FM) Frequency Range Channel Step Intermediate Frequency Sensitivity Stereo Separation Signal to Noise Ratio LINE-OUT Output Impedance GENERAL Power Supply Speaker Impedance Output Power Fuse > 60 dB > 50 dB (1kHz) 20Hz - 20 kHz 87.5-108 MHz 50 kHz 10.7 MHz 2.8 V 30 dB > 50 dB 1.5V (max.) 10k Ohm 12V DC (10.8-15.6V allowable) 4 or 8 ohm 75W x 4CH 10A
Note: Specifications and the design are subject to possible modification without notice due to improvement.