Philips Digital Satellite Receiver

DSR2211

Free to air and Pay TV access

Canaal Digitaal

Digital content brought to you by Philips and Canaal Digitaal
Better Fast Zapp, change from channel to channel within 1 second Dolby Digital 5.1 audio output for full surround sound Low-power mode with less than 1W consumption 2 SCART connectors for connecting your TV and other source Channels and installation menu can be locked by a PIN code More Access to Pay-TV channels and free-to-air services Free-to-Air access to digital TV and radio channels Easier Direct teletext buton on the remote control Universal remote for 6 devices from virtually any brand Fast and automatic installation of new channels Electronic Program Guide provides now-next information The STB is initiating recording on to your VCR or DVD+RW
Digital Satellite Receiver

DSR2211/03

Highlights
Access to Pay TV services
More and more top quality content are being broadcasted these days, but the only way to access these premium channels is to subscribe to the services from the local Pay-TV operators. Insert the operator's smart card into the set top box, and it will descramble the encrypted signals that are being broadcasted by the Pay-TV operators.

Specifications

Free-to-Air access
You want to continue to watch the public broadcasted programs, and also the new programs that were made available during the digital switchover. No subscription or fee required.

Connectivity

Automatic installation

Fast Zapp

Time it takes to go one channel up/down

Dolby Digital surround

Because Dolby Digital, the world's leading digital multi-channel audio standards, make use of the way the human ear naturally processes sound, you experience superb quality surround sound audio with realistic spatial cues.
New channels are quite often being added to the broadcasting network during the digital switchover. To ensure that you always have the access to all available channels, it is important that the product is able to scan and install new channels automatically. A very sensitive tuner in the product is scanning through the broadcasting network for new channels whenever the product is switched off. Whenever a new service is detected, it will be automatically updated and saved onto the channel list.
Audio Output - Digital: Coaxial (cinch) Plug & Play TV scart out: Audio L/R, CVBS, RGB VCR scart in: Audio L/R, CVBS, RGB Audio Output - Analog: Volume controlled L/R cinch RS232

Convenience

Low power mode
Electronic Program Guide nn
Low-power mode with less than 1W consumption
Direct teletext via the remote
Now and next information indicates how long the current program will continue and what will be the next program
Child Protection: Child Lock+Parental Control Ease of Installation: Autoinstall Favorite list TV programs: 1 Parental control: Lock with PIN code, Child timer Programmable Events: 8 Recording: Record failure alarm, Record header message Signal strength indication User Interface: Automatic program list update, Multiple subtitles supported, Now & Next ESG, On Screen Display on TV, TV and Radio mode Display Type: 4 digit display
A button which you can also find on your TV remote to have direct access to teletext

VCR management

Universal remote included
A universal remote control that works with virtually all brands means you do not have to carry different remote controls between the living room and second TV. It's no problem operating all devices from the second TV's location.
Having a second SCART connector in the box enables you to connect a VCR/DVD+RW and manage the recordings you want to make in the STB.

System Specifications

Parental lock
Channels and installation menu can be locked by PIN code
CPU speed: 166 MHz Video graphics: 8 MB SDRAM Flash memory size: 8 MB Ram size: 8 MB SDRAM Video decoding: MPEG-2 DVB up to MP@ML, Video bit rate up to 15 Mbit/s, Video format 4:3 and 16:9, resolution up to 720x576 pix

2 SCART connectors

Numeric display
2 SCART sockets allow you to connect to 2 devices at the same time. One for the TV, and the other either to a recording product (e.g. VCR or DVD recorder) for recording of TV programs, or to a video playback device (e.g. DVD player or Blu-ray player). Simply connect the SCART sockets on the product to the SCART socket on the desired devices, by a SCART cable. Video signals would then pass through onto the other device for viewing or recording.

4 digit numeric display indicating channel number and/or the time when the STB is in stand-by mode

Video Decoding

CA: MediaGuard Conditional access system: Subscription needed for pay-TV Reception-Demodulation: QPSK Frequency range: MHz 950-2150, Inputlevel range dBm 65 to -25, Video bit rate upto 15 Mbit/s De-scrambling: Smart Card reader

Audio Decoding

Compression format: MPEG layer I/II

Green Specifications

Banned Substance Declaration: Packaging Lead-free soldered product
Mains power: 230V (+/-10/-15%)/50Hz Power consumption: 25 W Standby power consumption: <1W Product dimensions (W x H x D): 260 x 60 x 275 mm Carton dimensions (WxDxH) inch: 41x34x11.6 Temperature (operation): +5C to +35C Temperature (storage): -20C to +60C Weight: 1.45 kg Weight incl. Packaging: 2.5 kg

Dimensions

Accessories
Included Accessories: High quality SCART cable, Mains cord, Multibrand remote control, Remote Control, User Manual, Quick install guide, Safety & warranty booklet Batteries: 2xAA size
Issue date 2009-03-06 Version: 6.0.7
2009 Koninklijke Philips Electronics N.V. All Rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. www.philips.com
12 NC: 00685 EAN: 93621 7

DSR2210-2211GB.qxd

17/11/2005

Page 1

WELCOME Congratulations on your choice of PHILIPS satellite receiver. This PHILIPS satellite receiver will allow you to obtain digital satellite programmes and services. Note: - This product is destined for Netherlands. - You need to take out a subscription to access the services of CANALDIGITAAL. Refer to your "Welcome packet". English

CONTENTS

1 Safety instructions _______________3 6.2 6.2.1 2.2 2.3 Product description ______________4 Front view _____________________4 Rear view ______________________5 The remote control ______________7.1 7.3.1 Connecting up the receiver _______8 Connecting to your HiFi/Audio receiver equipement (Analogue/Digital) _______________8.Menu structure _________________10 8.2 8.5.1 5.2 5.3 Installing the satellite receiver ___11 Installation ____________________11 Technical information ____________13 Storing the channels _____________14 9.6.1 The menu ______________________15 Code and parental lock __________15 9.When you are watching a programme _______________________________23 When you are watching a programme ____________________23 When you consult the EPG _______23 8.4 Electronical programme guide (EPG) _________________________20 List of the programmes __________20 Films, sports, youth, documentaries and other kinds of programmes ___21 Selecting programmes ___________22 List of selected programmes ______22 Informations bars (Info) _________19 The bottom bar ________________19 The top bar ___________________19 6.4 Choosing your favourite channels __16 Recording programmes __________16 Information about subscription and postbox ______________________18

CONTENTS 1

Page 2
Radio channels _________________23
11 11.1 11.2 11.3 English 11.4 11.5
The channels ___________________24 List of the channels _____________24 Altering the numbering of the channels ______________________24 Adding new channels ____________25 Removing channels ______________25 Reinstalling channels _____________25
Subscription programmes (not yet available) ______________________26
Information for subscribers (not yet available) ______________________26
Troubleshooting ________________27
Technical specifications _________29

17 17.1 17.2 17.3

More on your remote control ____30 TV mode (TV) _________________31 VCR and DVD mode (VCR, DVD) _32 Amplifier/Tuner mode (AMP) ______33

2 CONTENTS

Page 3

1 Safety instructions

All the safety and operating Instructions should be read and understood before the appliance is operated. For best results: - position your receiver away from radiators or other heat sources. Leave a space of at least 3 cm around the receiver for ventilation making sure that the ventilation holes are not obstructed. - This receiver is intended for use in a domestic environment only and should never be operated or stored in excessively hot, humid or damp conditions. - Make sure no objects or fluids enter the housing through the ventilation slots. Should this happen, disconnect your receiver from the mains and consult your retailer. - For cleaning, use a damp chamois leather. Never use any abrasive cloth, sponge or cleaner. - When connecting or disconnecting cables to the receiver always ensure the receiver is disconnected from the mains. Do not disassemble the equipment. There are no user serviceable parts. Mains connection Before connecting the receiver to the mains, check that the mains supply voltage corresponds to the voltage printed on the rear of the receiver. If the mains voltage is different, consult your dealer. Plastic bags can be dangerous. To avoid suffocation keep the bag away from babies and children. The Symbol on the packaging means that material is recyclable. If the receiver will not be used for a long time, unplug the mains cord from the wall socket. English

2.3 The remote control

SATELLITE MODE (SAT)
Detailed information about a programme or selection of language and/or subtitling. English

Standby B On/Off button.

INFO To display on screen an information bar with information about the programme.
A, B, C, D, E: Function buttons.
MENU To reach the main menu.
EPG ELECTRONICAL PROGRAMME GUIDE with information about the programmes.
OK Button to confirm your selection. CBVW Buttons to select the menus, programmes or to adjust the volume.
EXIT To return to a TV programme.
SERV Information about your subscription.
+Adjusts the TV volume. PREF To switch your favourite channels on and off.

c Mute/demute the sound.

TV/SAT Switch between watching from digital receiver or directly from the TV cable.

6 PRODUCT DESCRIPTION

Page 7
Your 5 in 1 Remote Control enables you to control most of your Audio/Video Equipment through various modes: satellite receiver, TV, VCR, DVD and Amplifier Tuner. Pressing the MODE button once will remind you of the MODE you are in through blinking lights: left for SAT, middle for TV, right for VCR, left/middle for DVD, middle/right for Amp/Turner. To set the MODE, press the MODE button several times until the desired mode is reached. The sequence is: SAT->TV>VCR->DVD->Amp/Tuner. At every keypress, lights blink to indicate in which MODE you are in. Note: some keys are shortcut keys to other MODES. In this case, the lights do not indicate the current MODE! (e.g. if you are in VCR MODE, pressing the volume keys will light the TV/middle indicator). Chapter 16 gives you all the information about the functions available in TV, VCR, DVD and Amp/Tuner modes as well as instructions on how to setup you remote control for your different audio-video appliances.
Remove the battery cover. Insert the two batteries (type LR6/AA 1.5 V) supplied. Position them as shown in the diagram, in the battery compartment. Replace the cover.
The Philips batteries supplied with your receiver's remote control do not contain any heavy metals such as Mercury or Nickel Cadmium. Nevertheless, in many countries, used batteries may not be disposed of with your household waste.

Please inquire about the local regulations regarding the disposal of used batteries.
Do not dispose of them with your household waste.

PRODUCT DESCRIPTION 7

English

Page 8

3 Connecting up the receiver
In this chapter, you will learn how to connect up the Philips digital satellite receiver to your existing equipment, such as a TV or VCR.

Satellite dish

Scart socket Satellite receiver

Mains plug TV

Scart socket

Video recorder

Note: - To watch a video cassette. We advise you, when you want to watch a video cassette, to put your receiver on stand by. - Digital cordless telephone. If you have a digital cordless telephone (DECT), it may sometimes block the signal of your receiver / TV. We advise you not to keep both appliances close to one other. - Smart card. Please leave your smart card in the receiver so that your subscription can be extended every month. - Further guarantees. If the satellite receiver breaks down within the period of guarantee, Philips Nederland will exchange it. In this case, the customer agrees to return the original appliance purchased.
8 CONNECTING UP THE RECEIVER

Page 9

3.1 Connecting to your HiFi/Audio receiver equipement (Analogue/Digital)

Satellite receiver HiFi

Depending on your HiFi / Audio receiver equipment, you might have several options to connect your digital receiver. ANALOGUE CONNECTION Connect the L/R audio output sockets to the relevant L/R audio input sockets of your audio equipment using a double CINCH cable (not supplied). Consult the user manual of your HiFi/Audio receiver equipment to choose the proper analogue audio inputs. Note: With this connection set up you can control the audio volume up/down and mute using your digital receiver or Hi-fi remote control. DIGITAL CONNECTION Connect the audio "DIGITAL" output socket to the relevant digital audio input socket of your audio equipment using a single CINCH cable (not supplied). Consult the user manual of your HiFi/Audio receiver equipment to choose the proper digital audio input. Note: With this connection set up you can only control the audio volume up/down and mute with your HiFi / Audio Receiver remote control, refer to the relevant user manual.
CONNECTING UP THE RECEIVER 9

Page 10

4 Menu structure
Setting the time and the channel to tape a video. Setting your favourite channels.

1 PROGRAMMA'S OPNEMEN 2 VOORKEURKANALEN KIEZEN 3 CODE EN KINDERSLOT 4 INSTELLINGEN 5 KANALEN INSTALLEREN 6 INFORMATIE ABONNEMENT EN BRIEVENBUS 7 TECHNISCHE INFORMATIE
Entering and altering of the code and entering of a parental lock. Installation of the receiver, TV, VCR and modem. To enter, add and remove channels, to alter the sequence of the channels and the summary of the channel list. To consult the period of validity of the subscription and read the CanalDigitaal messages. Checking the reception signal strength, installation of the aerial and consulting the decoder and software version.

MENU TERUG NAAR TV

INSTELLINGEN
Altering the volume, subtitling, spoken language, length of time the information bar remains on the screen, the reminder and the time. Altering the TV and VCR standard settings.
1 INSTELLEN DECODER 2 INSTELLEN TV/VIDEORECORDER

A TERUG NAAR MENU

TECHNISCHE INFORMATIE

1 SIGNAALSTERKTE

Checking the LNB installations and setting the aerial. Consulting the decoder and software version.

2 DECODERVERSIE

10 M E N U S T R U C T U R E

Page 11

5 Installing the satellite receiver
How to install your satellite receiver:
1 PROGRAMMAS OPNEMEN 2 VOORKEURKANALEN KIEZEN 3 CODE EN KINDERSLOT 4 INSTELLINGEN 5 KANALEN INSTALLEREN 6 INFORMATIE ABONNEMENT EN BRIEVENBUS 7 TECHNISCHE INFORMATIE
1 Turn on your TV. 2 When you power on the box, the front LED will turn on.
The Menu screen will then appear. Make sure your smart card is inserted in the slot, the chip facing upwards. Now, you can only access options 4,5 and 7. If the MENU screen doesn't appear after you have switched on the receiver, then press the TV/SAT button on your remote control twice. Note: Generally, when you don't have any screen after having connected you, press the TV/SAT button twice on your remote.
3 Execute the following three steps to install the receiver:
Step 1 Step 2 Step 3 INSTELLINGEN (Button 4) TECHNISCHE INFORMATIE (Button 7) KANALEEN INSTALLEREN (Button 5)

4 INSTELLINGEN

Installation
Installation of the decoder
You access the menu by pressing the MENU button. To choose one of the options in the MENU you can press one of the selected numbers or you can select the option with the arrows. Press OK to confirm your choice. Choose option 4 in the menu (INSTELLINGEN) and then 1 (INSTELLEN DECODER). With this MENU, you can select your favourite installation for your satellite receiver. Select the number of the function you've chosen or use the buttons to make your selection. The possible options appear when you press the arrows. 5.1.1.1 Preferred language You can choose between English, Dutch, Spanish, French, German, Italian or the original version. This option can only be selected if the programme is also subtitled with the selected language. 5.1.1.2 Subtitling You can choose between English, Dutch, Spanish, French, German, Italian or without subtitling. This option can only be selected if the programme is broadcast in the selected language. I N S TA L L I N G T H E S AT E L L I T E R E C E I V E R 11

Technical information

VOEDINGSSPANNING LNB SIGNAALSTERKE 1 GOED MATIG ONVOLDOENDE 2
7.1 ANTENNE INSTELLEN SATELIET SCHOTELNUMMER BAND FREQUENTIE LO LNB POLARISATIE SCHAKELING (22 KHZ) ASTRA 1G 1 KU HORIZONTAAL JA

Installation of the dish

B TERUG NAAR VORIG SCHERM A TERUG NAAR MENU
SATELLIET : ASTRA 1G SCHOTELNUMMER : 1 BAND : KU FREQUENTIE : 12.515 Ghz LO LNB : 10600 Mhz POLARISATIE : Horizontal Schakeling (22Khz) : Yes If you use another satellite, in the section SATELLIET you can select "OVERIGE" and enter the necessary parameters. Check in every case the LO and LNB values. You will find them in the manual for the dish aerial or on the sticker of the LNB. Contact the dealer who supplied you with the dish if you don't find these values. Once the right parameters have been installed, you can begin installing the channels.
Positioning the satellite dish
We advise you to have the dish installed by a professional with suitable measuring devices. 1 Return to the screen SIGNAALSTERKTE (Press B). 2 Select VOEDINGSSPANNING LNB with the help of the arrows. AAN (Yes) if you have one satellite dish. UIT (No) if you have connected several dishes up to your decoder. In that case, please contact your dealer. 3 Put the dish in direction 19,2 East of the ASTRA satellite position. 4 On the screen, you will see a receivingsindicator which indicates the quality and strength of the reception. The length of the bar indicates the strength and the colour the quality. Position the dish as well as possible: the bar must be as long as possible. If the signal quality is green and reaches almost 3, the strength of the signal is acceptable. You may fix the dish in this position. I N S TA L L I N G T H E S AT E L L I T E R E C E I V E R 13
B ANTENNE INSTELLEN A TERUG NAAR VORIG SCHERM
From the menu, press 7 (TECHNISCHE INFORMATIE) and then 1 (SIGNAALKWALITEIT). With the screen SIGNAALKWALITEIT, you can find out the strength of the signal received. We advise you to have the dish installed by a professional with suitable measuring devices. For the reception of the digital signal of the ASTRA satellite, all the parameters are already installed. To alter these settings, press on B (ANTENNE INSTELLEN).

Page 14

If the signal quality is orange, you may change the direction of the dish in order to get a better signal. If the signal quality is red, the signal is bad. The signal may be bad when: - the dish is not positioned in the right direction. - the connection between the dish and the decoder with the feeder is not well made. In that case, please contact your dealer. When the receiving indicator is green and in the region of 3, the decoder is ready to have the channels input.
5 KANALEN INSTALLEREN 1 LIJST VAN KANALEN 2 KANALEN HERNUMMEREN 3 KANALEN TOEVOEGEN 4 KANALEN VERWIJDEREN 5 KANALEN INSTALLEREN A TERUG NAAR MENU

Storing the channels

Select KANALEN INSTALLEREN (button 5 in the menu). The following screen then appears:

Canal digitaal

5.5 KANALEN INSTALLEREN

CANAL DIGITAAL

If you choose this method, the channels of CANALDIGITAAL will be stored first as per the order of CANALDIGITAAL in the Channel List. Then, the other channels will follow in a indeterminate order. The decoder allows you to give new number to the "remaining channels" (the numbers of the CANALDIGITAAL channels may not however be changed). With this option, the searching process will last about 15 to 30 minutes. During this operation, a progress display appears on the screen. When the channels have been found (the display shows 100%), a list of all the channels is automatically stored in the decoder.
OK KANALEN ORDENEN EN OPSLAAN B IN WILLEKEURIGE VOLGORDE A TERUG NAAR VORIGE SCHERM
In an indeterminate order
If you choose this method, the channels will be stored in an indeterminate order in the Channel List. The decoder allows you to give new number to all the channels (incl. CANALDIGITAAL). The searching process will last about 15 to 30 minutes. During this operation, a progress display appears on the screen. When the channels have been found (the display shows 100%), a list of all the channels is automatically stored in the decoder. 14 I N S TA L L I N G T H E S AT E L L I T E R E C E I V E R

Page 15

6 The menu
MENU 1 PROGRAMMAS OPNEMEN 2 VOORKEURKANALEN KIEZEN 3 CODE EN KINDERSLOT 4 INSTELLINGEN 5 KANALEN INSTALLEREN 6 INFORMATIE ABONNEMENT EN BRIEVENBUS 7 TECHNISCHE INFORMATIE

Code and parental lock

Button 3 of the MENU You may personally enter the code or change it. When you want to watch a locked programme or a programme you have to pay for, you always have to enter this pincode. You can also lock some channels with a parental lock.

3 PINCODE EN KINDERSLOT

Entering a code

1 CODE INSTELLEN

3 KINDERSLOT

VOER CODE IN ++++

Press MENU, and then 3 and 1. Choose a 4-digit number (not 0000). If you want to change your code, choose option 1 again (CODE WIJZIGEN). Confirm your CODE by pressing OK or by returning to the screen CODE EN KINDERSLOT and pressing A.

OK BEVESTIGEN A STOPPEN A TERUG NAAR MENU
3.2 KINDERSLOT ACTIVEREN CANAL DIGITAAL KINDERSLOT NIET ACTIEF. C+C+RTLRTLSBSVERONICA 6 TMF 7 NEDNED2 9. OK BEVESTIGEN B KINDERSLOT ACTIVEREN A TERUG NAAR MENU

Using the parental lock

With this option, you lock and unlock one or more channels. Press MENU, then 3 and then 2. You have to enter your pincode first. On this screen, it is possible to: - Select the channels you want to lock. When you've selected a channel, a small lock appears on the screen. - Press the B button to change the status of the parental lock. The symbol of an open lock becomes a closed lock or vice-versa.

T H E M E N U 15

The MENU button With the MENU of your satellite receiver, you can install a lot of useful settings, as for example a parental lock, your favourite channels, using the timer to tape various programmes, etc. You access the menu by pressing the MENU button. To select one of the options in the MENU, you may press the selected number or the arrow buttons on your remote control. Press OK to confirm your choice.

Page 16

Watching a locked channel
When by flicking you meet a locked channel, you see an information bar in the lower part of the screen. It asks whether you want to access this channel: press OK and enter your pincode. Now, you can watch the programme.
2 VOORKEURKANALEN INSTELLEN CANAL DIGITAAL VOORKEURKANAAL. C+C+RTLRTLSBSVERONICA 6 TMF 7 NEDNED2 9. OK BEVESTIGEN A TERUG NAAR MENU
Choosing your favourite channels
Press the MENU button and then 2 to go to the menu VOORKEURKANALEN KIEZEN. Here you can create a list of your favourite channels. When flicking between the channels, you will only see the favourite channels you've selected. Use the arrow buttons to select your favourite channels and press OK to confirm your choice. The symbol appears alongside each channel that has been selected, both in the programme menu and in the information bar. To cancel the selection of a programme, press the OK button and the symbol will disappear.

Recording programmes

To record a programme, the receiver must be switched to the channel you want to record. You can program the receiver so that it will automatically record the channel you want to record at the right time. This can be very useful if you want to record different channels when you're absent. Nevertheless, you still have to program your videorecorder too.

8.1.1 Choosing a programme
When you want to watch a programme, you can select it with the arrow buttons or and than you can press the OK button in order to: - know if a programme is being broadcast at that moment, - store a programme which is being broadcast later in the memory, - delete a programme which has been stored in the memory, - request a programme you have to pay for.This function will only be available at a later date, - record a programme or cancel a recording.
8.1.2 Programmes broadcast on other days
When you want to look for a programme which is broadcast on a given day in the EPG, you can perform the following operation: - to select the day: - Press the button corresponding to the selected day of the week (MA, DI,.) and go directly to the time (morning) from 6:00 to 14:00. - For afternoon programmes between 14:00 and 20:00 press the DAG button. - For evening programmes between 20:00 and 24:00 press the AVOND button. - For night programmes between 00:00 and 6:00 press the NACHT button.
20 E L E C T R O N I C A L P R O G R A M M E G U I D E

Page 21

+ button When you press the + button, you will get detailed information about the selected programmes (summary of the programme, actors, presentators, directors, producers,.).
8.2 Films, sports, youth, documentaries and other kinds of programmes
Here you find all the programme which are selected according to the various kinds: films, sports, programmes for young people and other kinds of programmes in chronological order. You can search for the programmes up to one week ahead. When you choose ANDERE GENRES (with the arrow buttons or OK ), you will see the following list: - Series - News magazines (Infomagazine) - Entertainment - Music (Muziek) - Weather forecast (Weerbericht) - Events (Evenement) - Others (Overige)
When you press PROGRAMMA OVERZICHT and then B, you can choose a programme on the basis of the channel and the starting time. When you press OK, the EPG will look for the corresponding programme. Then you may store this channel in the LIJST GESELECTEERDE PROGRAMMA'S.

8.2.3 Choosing programmes on the basis of time
When you select FILM, SPORT, JEUGD, DOCUMENTAIRES EN OVERIGE GENRES (movies, sports, youth, documentaries or other kinds) and then press B, you can select a programme on the basis of the starttime. After that, when you press OK, the EPG will look for the corresponding programme. Then, you can store this channel in the LIJST GESELECTEERDE PROGRAMMA'S.

8.2.4 Reminder

The receiver will warn you when a programme you have entered in the LIJST GESELECTEERDE PROGRAMMA'S is going to start. You can install the type of warning signal via the MENU. Press MENU and then 4 and 1. A few minutes before the beginning of the programme, you will be warned. In HERINNERING you can choose: - audio: the decoder will utter a BEEP. - None. When you press the + button, the name of the programme you have stored in the memory will appear.
8.4 List of selected programmes
In the list of the selected programmes you will find all the programmes you have stored in the memory of the receiver. Here you will find two types of programmes: - programmes you have selected in the MENU to be recorded (indicated with PROGRAMMERING OPNAME) ; when these programmes start, the receiver will automatically switch on the channel on which the programme is to be broadcast. - programmes you've selected in the EPG ; when these programmes start, the receiver gives you a warning signal. - You can also delete a programme from this list by selecting the programme and pressing OK.
22 E L E C T R O N I C A L P R O G R A M M E G U I D E

Page 23

9 When you are watching a programme
9.1 When you are watching a programme
The + button When you are watching a programme and you press the + button, you can choose a specific language and/or a subtitling. You can only use this function when the programme you have chosen is being broadcast in the selected language and/or is subtitled. To go from one option to another one (language, subtitling), press the arrow buttons. You can choose the various languages or the subtitling with the arrow buttons. To confirm your choice and return to the programme. Press the + or OK button. VOORK-button With this button you can switch on or off your favourite channels. Press VOORK and the symbol appears in white on the screen. Now you may flick between your favourtie channels. When you press VOORK again, the symbol appears in red on the screen. Now you may flick between all the channels.
9.2 When you consult the EPG
When you are in the EPG and press the + button, then you get further information about the programme you have selected as well as a summary of the programme, the presentator, the manager, the actors, etc.

10 Radio channels

In the channel list, you will also find the indication "Radiokanalen" preset. When you select such a channel, you can, through the description on the screen, select a radio programme.

WATC H I N G A P R O G R A M M E 23

Page 24

11 The channels
5.1 LIJST VAN KANALEN CANAL DIGITAAL. C+1 C+2 RTL4 RTL5 SBS6 VERONICA TMF NED1 NED2. OK DIT KANAAL BEKIJKEN A TERUG NAAR VORIGE SCHERM

List of the channels

To consult the list of the channels: - press MENU and 5. The menu KANALEN INSTALLEREN appears on the screen. - select option 1 to consult the LIJST VAN KANALEN. Use the arrow buttons to select a channel or press directly the number of the channel. You will recognize your favourite channels and the locked channels with the corresponding symbols. When you watch a programme, you can go directly to the menu LIJST KANALEN by pressing the E button.
Altering the numbering of the channels
During the installation, you have chosen the order of CANALDIGITAAL or a random order. You may alter the order: - if you have determined your own numbering, you may alter the complete numbering of the channels (from 1 up to 500). - if you have chosen the numbering of CANALDIGITAAL, you may only alter the numbering of the channels which are not CANALDIGITAAL channels. You can access this function via the menu KANALEN INSTALLEREN: - press MENU and then 5. - then choose option 2 (KANALEN HERNUMMEREN). With the arrow buttons , you can consult the list of the channels. You may also go directly to the channel you are interested in by pressing the number of the channel. You may select a channel and press the OK button. Then you can move the channel with the help of the arrow buttons. You confirm the new position with the OK button. Now you can choose to put this channel before or after this new position or to exchange it with the new position.

24 T H E C H A N N E L S

Page 25

11.3 Adding new channels

It can happen that new digital channels are launched. You may add these new channels in the memory of your decoder. You may add new channels with the menu KANALEN INSTALLEREN: - press MENU and 5. - choose then option 3 (KANALEN TOEVOEGEN). On this moment, the decoder will start searching automatically. A progress display will appear on the screen.when the search is complete, you will find the new channels in the LIJST VAN KANALEN.
11.5 Reinstalling channels
During the installation, you had to choose between the numbering of CANALDIGITAAL or a random numbering. This option gives you the possibility to go from one type of numbering to another one. press MENU and then 5. choose then option 5 (KANALEN INSTALLEREN). Press OK so that the display KANALEN INSTALLEREN appears. The system warns that the complete list of channels can be altered and that you have to enter your CODE to access this menu. now you may choose again between both kinds of numberings of the channels. English

11.4 Removing channels

You may also remove channels which are stored in the memory with the help of the menu KANALEN INSTALLEREN: - press MENU and then 5. - choose then option 4 (KANALEN VERWIJDEREN). A list of channels you may remove appears on the screen. You may select the channel with the arrow buttons. Then you can remove the channel by pressing OK. The channel which has been removed will be restored in the memory by installing the channels once again.

T H E C H A N N E L S 25

Page 26
12 Subscription programmes

(not yet available)

When this manual was being printed, subscription programmes were not yet available. You will be informed when these services will be available.
13 Information for subscribers
CANAL DIGITAL WELKOM 1 ABONNEMENT 2 INFORMATIE OVER TOKENS 3 INFORMATIE VOOR ABONNEES 4 BETAALDE INTERACTIEVE DIENSTEN
When you press the SERV button whilst watching one of the channels of CANADIGITAAL, you may request information abouth various subjects.

E SERV TERUG NAAR TV

14 Symbols and abreviations
FAVOURITE CHANNEL This symbol indicates which channels you have selected as being your favourite channels. THE PROGRAMME IS BEING BROADCAST NOW This symbol indicates that a programme is being broadcast at this moment. By pressing OK you go directly on this programme. A PROGRAMME IN THE MEMORY Programmes you have stored in the LIJST GESELECTEERDE KANALEN are recognizable by this symbol. PROGRAMMED FOR RECORDING WITH THE VCR This symbol indicates in the EPG that a programme has been selected to be recorded with the videorecorder. CHANNEL WITH PARENTAL LOCK This symbol indicates in the EPG and INFO that a channel has been locked with a parental lock. Only the persons knowing the code will be able to watch this channel. When the lock is open, the parental lock is not active. ORIGINAL VERSION, SUBTITLING These are abbreviations which are used to indicate how a programme is being broadcast: in the original language or with a subtitling. This symbol appears in the top bar when you press INFO. PROGRAMME FORMAT These abbreviations indicate the format in which the programme is being broadcast. 16/9 means large format and 4/3 normal format. These symbols appear in the top bar when you press INFO.

O.V./ ST:

16/9 and 4/3:
26 S U B S C R I P T I O N P R O G R A M M E S

Page 27

15 Troubleshooting
When you have problems with your Philips satellite receiver, first check the following points.

PROBLEM

No picture, no sound and no front panel display. No picture, no sound; but the LED on the front of the receiver lit red. No picture, no sound; but the LED on the front of the receiver is switched off.

POSSIBLE CAUSE

Receiver is not plugged into the mains or is not switched on. The receiver is on standby.

Page 39
SEI-Sinudyne Saba Saccs Sagem Saisho Salora Sambers Samsung

Sandra Sansui Sanyo

Schneider
Scotland Seleco Sencora Sentra Serino Sharp Shintoshi Shorai Siarem Siemens Silva Silver Singer Sinudyne Solavox Sonitron Sonoko Sonolor Sontec Sony Sound & Vision Soundwave Ssangyong Standard Stenway
0321, 0136, 0223, 0190, 0114, 0362, 0225, 0652, 0637, 0482 0543, 0038, 0244, 0036, 0291 0221, 0543, 0317, 0190 0129, 0543 0064, 0036, 0244, 0583, 0099, 0317, 0397, 0291, 0546, 0235, 0243, 0614, 0645, 0671 0244, 0235, 0063, 0072, 0366, 0244, 0397, 0038, 0099, 0243, 0131, 0135 0064, 0039, 0421, 0546, 0274, 0245, 0286, 0398, 0244, 0583, 0233, 0286, 0438, 0245 0637, 0243, 0482 0120, 0063, 1220, 0321, 0321 0114, 0129, 0543 0354, 0222, 0227, 0063 0114, 0129 0037, 0129, 0114, 0543, 0321, 0233 0099, 0190 0397, 0235, 0366 0064, 0036, 0309 0190, 0235 0064, 0036, 0321, 0397 0038, 0037, 0063, 1532, 1678, 0129 0129, 0401 0445, 0036, 0064, 0244, 0245, 0401 0245, 0309
Stern Strato Stylandia Sunkai Sunstar Sunwood SuperTech Superla Supra Susumu Sysline Sytong T+A TVTEXT 95 Tandberg Tandy Tashiko Tatung Tec Technics Teleavia Telefunken
Telegazi Telemeister Telesonic Telestar Teletech Teleton Televideon Temco Tennessee Tensai
Texet Thomson Thorn Tokai Tomashi Toshiba Trans Continens Trident
0233, 0286, 0190, 0291, 0438 0064, 0637, 0321, 0382, 0482 0064, 0036, 0036, 0064, 0394 0190, 0245, 0099, 0244, 0120 0244, 0063, 0190, 0243 0543, 0099, 0064, 0244, 0038 0244, 0286, 0274, 0364, 0223 0128, 0136, 0289, 0362, 0652, 0064, 0101, 0223, 0064, 0606 0064, 0036, 0364 0233, 0063, 0244, 0398, 0401, 0064, 0036, 0244, 0131, 0321, 0404, 0132, 0245, 0274 0243, 0036, 0245, 0401 0136, 0223, 0362, 0225, 0652, 0064 0265, 0064, 0101, 0131, 0362, 0099, 0401, 0539 0190, 0064, 0364, 0535, 0063, 0097, 0129, 0136, 0543 S E T U P C O D E 39

Page 40

Tristar Triumph Tsoschi Uher
0245 0373, 0543, 0233, 0513, 0064, 0401, 0445 Ultravox 0064, 0129, 0243, 0114, 0274 Unic Line 0064, 0500 United 0064 Universum 0064, 0132, 0131, 0354, 0097, 0373, 0539, 0038, 0244, 0274, 0063, 0438, 0507, 0037, 0291, 0036, 0317, 0397, 0445, 0197, 0321, 0364 Univox 0064, 0114, 0190, 0265, 0364 Vestel 0064, 0244 Videologic 0245, 0243 Videosat 0274 Videotechnic 0244 Vision 0244 Vistar 0233 Voxson 0114, 0190, 0445 Waltham 0064, 0445, 0136, 0244 Watson 0064, 0606, 0036, 0245, 0421, 0546 Watt Radio 0129, 0243 Wega 0063, 0114, 0064 Wegavox 0036 White Westinghouse 0243, 0064, 0364 Windstar 0309 Xrypton 0064 Yamishi 0482, 0244, 0309 Yokan 0064 Yoko 0244, 0291, 0036, 0064, 0245, 0366 Zanussi 0233, 0244 Zeno 0366 sinu 0129 INSTELCODES VOOR VIDEORECORDERS SETUP CODES FOR VCR ASA AVP Adelsound Adventura Adyson Aiwa 0108, 0099 0334, 0027, 0064, 0379, 0375

Akai Akiba Akura Alba Allstar Ambassador Amstrad Anitech Ansonic Aristona Asha Asuka AudioTon Audiosonic Baird Bang & Olufsen Basic Line Beaumark Bestar Blaupunkt Blue Sky Bondstec Brandt Brandt Electronic Bush CGE Calix Carrefour Cathay Catron Cimline Cineral Citizen Clatronic Colt Combitech Condor Craig Crown Cybernex Cyrus Daewoo Dansai De Graaf Decca Denon
0342, 0133, 0068, 0099 0099, 0047, 0027, 0305, 0379, 0342, 0047 0027, 0352, 0099, 0068, 0131, 0305, 0047, 0305 0253, 0222, 0108, 0061, 0047, 0099 0068, 0347, 0520, 0348, 0099, 0342, 0379, 0305, 0305, 0047, 0305 0064, 0099, 0074 0047, 0305, 0108 0305, 0047, 0669 0099, 0305 0108, 0075, 0069, 0131, 0193 0027, 0035, 0094, 0108 0069

40 S E T U P C O D E

Page 41
Diamant Dual Dumont ESC Elbe Elcatech Electrohome Electrophonic Elin Elsay Elta Emerex Emerson Europhon Ferguson Fidelity Finlandia Finlux Firstline Fisher Frontech Fuji Funai GE GEC Galaxis General General Technic Genexxa GoldHand GoldStar Goodmans Gradiente Graetz Granada Grandin Grundig HCM HI-Q Hanimex Hanseatic Hantor Harley Davidson Harwood
0064 0068, 0108, 0305 0108, 0027, 0131 0047, 0267, 0305 0065, 0099, 0070, 0305, 0027, 0064, 0072, 0068, 0347, 0348, 0520, 0027 0027, 0099 0108, 0131, 0027, 0075, 0069, 0193 0108, 0069, 0027, 0131 0099, 0070, 0064, 0072, 0375 0074, 0131, 0075, 0099 0064, 0065 0099, 0305, 0108, 0047, 0089, 0027, 0064, 0131, 0068, 0267 0108, 0131, 0027, 0075, 0267, 0064, 0069, 0253 0099, 0027, 0064, 0305 0374, 0376, 0108, 0222, 0234, 0253, 0347, 0027 0099
Hinari Hisawa Hischito Hitachi Hornyphone Hypson IR
ITT ITV Imperial Ingersol Inno Hit Interfunk Intervision Irradio JVC KLH Kaisui Kendo Kenwood Kimari Kneissel Kodak Korpel Kuba Electronic Kyoto Lenco Leyco Lloyd's Loewe Logik Luxor M Electronic MGA Magnasonic Magnavox Magnin Manesth Marantz Matsui Medion Memorex
0031, 0099, 0068, 0379, 0267, 0072 0069, 0193, 0068, 0267, 0027, 0031, 0099, 0305 0068, 0253, 0131, 0069, 0074, 0099, 0133, 0031, 0047, 0072, 0108, 0267, 0375 0133, 0131, 0068, 0411, 0267 0047, 0064, 0031, 0267 0099, 0267 0108, 0131 0305, 0027, 0064 0099, 0108 0094, 0068, 0035, 0411, 0233, 0099 0342, 0099, 0133 0068, 0094, 0108, 0064, 0031, 1189 0267, 0031, 0133 0133, 0070, 0089, 0131, 0074, 0075, 0099 0064, 0027, 0305 0108, 0099, 0072, 0108 0108, 0089 0031, 0375, 0379, 0267, 0131, 0027, 0064, 0075, S E T U P C O D E 41

Page 42

Memphis Metz Minerva Minolta Mitsubishi Motorola Multitech Murphy Myryad NEC Neckermann Nesco Nikkai Nokia Nordmende Oceanic Okano Olympus Optimus Orion Osaki Otto Versand Palladium Panasonic Pathe Cinema Pathe Marconi Penney Pentax Perdio Philco Philips Phonola Pioneer Portland Pro Vision Profitronic Proline Prosonic Protec Pye Quasar Quelle RCA RFT Radialva
0374, 0222, 0064, 0108, 0254, 0069 0070, 0108, 0075, 0027, 0047, 0108 0065, 0068, 0099 0099, 0047, 0305 0131, 0068, 0075, 0133, 0305, 0267 0068, 0411, 0347, 0348, 0521, 0234, 0555 0131, 0075, 0108, 0027, 0068, 0133 0375, 0099, 0064, 0075 0031, 0379, 0375 0099, 0027, 0068, 0099, 0064, 0031, 0267 0253, 0254, 1189 0070, 0069, 0064, 0027 0065, 0099 0108, 0108, 0069, 0094 0305, 0267, 0108 0069, 0075, 0064, 0075