WASHING MACHINE CANDY CTS 102

A B1 B2 C1 C2 H p

PROGRAMME/TEMPERATURE SELECTOR SPIN SPEED SELECTOR WASH TEMPERATURE SELECTOR EASY IRON EXTRA RINSE START/STOP KEY CONTROL POSITION INDICATOR
Table of programmes mod. CTS 102
aprox. Mx. temp. Mx. time setting spin min. C speed

800 1,2 2

programme

programme for

1. fast coloureds with prewash 2. fast coloureds 3. * fast coloureds 4. delicate coloureds bleach/whitener vigorous rinse vigorous spin 5.mixed synthetics

Mx. load kg

5,5 5,5 5,5 5,5

Washing powder load

Option keys C

COTTON

MIXED /SYNTH.

6.coloureds 7.acrylics gentle rinse gentle spin 8. delicates woolmark woollens hand wash gentle rinse gentle spin empty fast 32 min.

DELICATES

SPECIAL
* Programme as per EN 60456
Technical data mod. CTS 102

Wash power rating

175 W.

Mains voltage

230 V. / 50 Hz.

Spin power rating

340 W.

Pump motor power rating

Heating element power rating

1950 W.

Max. power input

2200 W.

Water Energy Mains consumption consumption fuse Water * prog. * prog. amp. rating pressure EN 60456 EN 60456
10 A. 0,05-0,8 Mpa 54 L. 1,04 Kw/h.

PREPARING THE WASH CYCLE

1.- Once the washing is loaded, ensure that the drum doors are properly closed. 2.- Add detergent and additives, not exceeding the maximum level indicator. detergent for pre-wash I detergent for wash programme II bleach fabric conditioner
SELECTING THE DESIRED PROGRAMMES AND OPTIONS
3.- Tur n the programme selector (A) to the desired programme. (clokwise). 4.- Press the key or keys for any options desired (C1, C2). C1: easy iron key This function helps reduce creasing, depending on the programme selected and the type of fabric washed. This works as follows: Mixed,Synthetics. Intermediate spins during rinses are eliminated, the final spin is a gentle spin. Delicates. Intermediate spins during rinses are eliminated and the machine stops before the final spin, which is a gentle spin. Hand wash, Woollens and Cotton. The machine stops before the final spin. Rinses. Intermediate spins during rinses are eliminated, the final spin is a gentle spin. To complete the wash cycle in the Delicates , Hand wash , Cotton, and Woollens programmes, press the Easy Iron key again: the machine will empty and perform the required spin. To empty machine of water with no spin, cancel the ongoing programme and select the Empty programme C2: extra rinse key The electronic system engaged by this key activates a new special rinse cycle. More water and a combination of drum rotation movements ensure that washing is perfectly rinsed. The key can be activated in Cottons, Mixed, Synthetics, Delicates, and Rinses programmes. 5.- Select spin speed if required (B1) B1 spin selector Use this control to select the maximum spin speed within the range for the model of washing machine in question and the programme selected (see programme table). The control can be turned in both directions. Spin speed may be selected at any time during the programme. 6.- Select wash temperature if required (B2) B2 temperature selector Use this control to select the wash temperature within the range for the programme selected (see programme table). The control can be turned in both directions. Select the required temperature before starting the programme. 7.- Once you have selected the desired options, press the START key (H). The washing machine will start up. To cancel an option after setting, just press the option key again.
To change or cancel a programme once the programme selected has started, proceed as follows: - Press the key (H). The programme has been cancelled, and another may be selected. - Select the new programme. - Press (H) again. - The machine will then run the new programme selected Programme Pause To pause the wash programme so that more washing can be added, proceed as follows: - Hold down the key (H). When the door lock disengages (after approx. 2 minutes), open the door and put the additional washing into the drum. - Close the door and press (H) again. - The machine will continue with the programme. END OF PROGRAMME For safetys sake, set the programme selector or the on/off key to OFF when the programme ends.