Which Cannon will you choose?
Fitzroy Profile In-built Fitzroy Profile Freestanding Canterbury In-built Canterbury Freestanding Fitzroy Profile In-built PowerFlue
Warmth anywhere, with Cannons gas log heaters and accessories.

Contents

3 Installing options Powerflue installation & operation Accessory kits
Designed and made in Australia.
Our heaters suit large living spaces with a need for fast room heating. We have also created a traditional looking fire with realistic eucalypt logs. Cannon gas log heaters are built to a high standard specifically for the Australian market with attention to all details. Our highly efficient heat exchanger is backed by a 10 Year Warranty with 12 months on all other parts.
Cannons Powerflue has some unique installation and operation advantages.
Unlike standard gas log heaters, the Powerflue is terminated horizontally from the rear of the unit, eliminating the need for the flue to run up through the wall and protrude above the roofline. This means you can place the heater on any external wall, even in an apartment. Plus it is a room-sealed appliance, meaning all air for combustion is taken from outside, not from within your room. The combustion by-products are then vented externally via a fan in the flue ensuring that your home stays clean and fresh.
Standard heater operation. Flue goes directly through the ceiling and roof, or up through the wall cavity and above the roof line. Powerflue operation. Air is drawn in from outside for combustion and vented outside via a fan.

Cannon heater models

12 Fitzroy Profile In-built Powerflue Fitzroy Profile In-built Fitzroy Profile Freestanding Canterbury In-built Canterbury Freestanding
14-15 Specifications, dimensions and installation information
Creating the look of a fireplace is simple with Cannon.
The Mock Fireplace kit is designed specifically for homes that do not have an existing masonry fireplace. Using the kit, your In-built heater can be easily and safely installed into a combustible wall. Whether fluing through the wall cavity, the ceiling plaster or directly out an external wall, to conceal the heater cabinet and/or flue, simply construct a purpose built timber or plasterboard enclosure.
Accessory kits provide more installation options.
Cannon have been supplying the Australian market for over 15 years now and have developed a range of installation accessories that will allow you to install the heater you want in the location you want. So whether you are updating an existing gas heater, installing into a open fireplace, or placing a heater near an external wall the Cannon accessory kits will allow you to efficiently create the finished look.
1. Choose your desired location and construct the framework that will enclose the heater according to your fluing requirements. Be sure to allow for the required clearances between the heater cabinet and combustible surfaces.
2. Attach the mock fireplace kit to the heater as per the instructions. Position the heater into the framework then install the flue.
3. Finish with plasterboard (or timber panelling) to enclose the framework, maintaining appropriate clearances.
Console kits. The console kit is a decorative cover that fits over the rear of the heater to allow installation against an existing wall without building a mock wall or installing a mantle piece.

Spacer kit. When installing into a shallow fireplace cavity the 50mm spacer kit helps to provide the minimum 50mm clearance at the rear by bringing the heater forward.
Surround kit. This decorative surround allows the heater to be installed into existing fireplaces where the fireplace opening is wider than the heater height and/or width.
Important note: The details on these pages are for purposes of briefly illustrating the steps of installing a heater into a mock fireplace situation and showing the accessories available. For full details refer to the comprehensive instructions included with the heater or at www.cannonheaters.com.au 2 3
Fitzroy Profile In-built Powerflue, heating freedom.
A log fire wherever you want it.
SIDE CONTROLS ELECTRONIC IGNITION 2 HEAT SETTINGS 3 SPEED FAN NEW NATURAL LOOK EUCALYPT LOGS REALISTIC FLAME APPEARANCE STANDARD MESH SAFETY GUARD
METALLIC BLACK BAKED ENAMEL FINISH HEATS ON AVERAGE 80 SQUARE METRES OPTIONAL SPACER KIT OPTIONAL SILVER TRIM OPTIONAL HEATER SURROUND OPTIONAL CONSOLE KIT

P R O F I L E

With a horizontal flue that goes straight from the rear of the heater to the outside, the Fitzroy Profile In-built Powerflue gives you heating freedom. The clever design allows you to place the heater on any external wall, even in an apartment. And, because the Powerflue uses outside air for combustion, your home stays clean fresh and warm. Plus with a high star rating you know you have chosen top efficiency. For installation into a combustible wall or enclosure, a Mock Fireplace Kit is also available.

Silver trim

Fitzroy Profile In-built, cosy yet classy
Put your feet up and relax.
SIDE CONTROLS ELECTRONIC IGNITION 2 HEAT SETTINGS & 3 SPEED FAN NEW NATURAL LOOK EUCALYPT LOGS REALISTIC FLAME APPEARANCE STANDARD MESH SAFETY GUARD
Designed to suit Australian needs, the Fitzroy Profile In-built has become a proven favourite. Clean, fuss-free design with high efficiency and heat output. The Fitzroy Profile In-built will fit neatly into the cavity of existing gas/oil space heaters, so you can replace your old heater with a minimum of fuss, labour, and most importantly, cost. A Mock Fireplace kit is available to make your heater suitable for installation against timber or plasterboard (combustibles).
Fitzroy Profile Freestanding, the perfect solution
Enjoy warmth wherever you want it.
SIDE CONTROLS ELECTRONIC IGNITION 2 HEAT SETTINGS 3 SPEED FAN NEW NATURAL LOOK EUCALYPT LOGS
REALISTIC FLAME APPEARANCE METALLIC BLACK BAKED ENAMEL FINISH STANDARD MESH SAFETY GUARD HEATS ON AVERAGE 80 SQUARE METRES OPTIONAL SILVER TRIM

Clean lines, with concealed operating controls, ensure a stylish minimalist design that teams with a high level of efficiency and heat output. Installation is simple as only minimal clearances to combustible surfaces are required. The heater can be safely placed almost anywhere in the room, making it particularly suitable for family rooms or large living areas.
Canterbury In-built, contemporary indulgence
A glass of wine, a good book and a Canterbury
SIDE CONTROLS ELECTRONIC IGNITION 2 HEAT SETTINGS & 3 SPEED FAN NEW NATURAL LOOK EUCALYPT LOGS REALISTIC FLAME APPEARANCE METALLIC BLACK BAKED ENAMEL FINISH
HEATS ON AVERAGE 80 SQUARE METRES OPTIONAL GOLD TRIM OPTIONAL MESH GUARD OPTIONAL SPACER KIT OPTIONAL HEATER SURROUND OPTIONAL CONSOLE KIT

C A N T E R B U RY

Superb design with a gentle curving front glass that continues through the surround, results in a refined, elegant statement. Double glazing removes the need for a mesh guard, providing an unobstructed view of the fire. Able to replace existing gas/oil space heaters with minimum effort,

Gold trim

the Canterbury In-built fits neatly into the existing cavity. A flue is not required when installed into a masonry or brick fireplace reducing installation costs. Also available with a Mock fireplace kit for installation against timber or plasterboard (combustibles).
Canterbury Freestanding, curved comfort
A panoramic view to be enjoyed.
SIDE CONTROLS ELECTRONIC IGNITION 2 HEAT SETTINGS 3 SPEED FAN NEW NATURAL LOOK EUCALYPT LOGS REALISTIC FLAME APPEARANCE
METALLIC BLACK BAKED ENAMEL FINISH HEATS ON AVERAGE 80 SQUARE METRES OPTIONAL GOLD TRIM OPTIONAL MESH GUARD
Features a refined, elegant curved appearance that will effortlessly suit any home situation. The double glazed picture window allows unobstructed viewing of the flames creating the perfect feel of a log fire. Also delivers heat effectively with an impressive energy rating
and requires minimal clearances, making it versatile to install almost anywhere in the room. Optional mesh guard and gold trim also available.
Specifications, dimensions and installation information
Specifications Type Colours Thermal input Gas type Efficiency rating Heats on average Fan Dimensions Height Width Depth

In-built (FITZPIB-02)

In-built Metallic black baked enamel finish, optional silver trim 26 Mj/hr Natural/LPG 4 stars square metres (80m2) 3 speed automatic Insert Fascia 600mm 650mm 695mm 850mm 343mm* 50mm (*Depth including flue spigot: 355mm)
In-built Powerflue (FITZPIBPWR-02) In-built Powerflue with rear horizontal flue and terminal Metallic black baked enamel finish, optional silver trim 28 Mj/hr Natural Gas/LPG 4.4 stars 80 square metres (80m2) 3 speed automatic Insert Fascia 605mm 655mm 695mm 850mm 380mm 50mm
Freestanding (FITZPFS-02) Free-standing/top flue
Metallic black baked enamel finish, optional silver trim 26 Mj/hr Natural/LPG 4 starssquare metres (80m2) 3 speed automatic 720mm 650mm 395mm Minimum from flue centre to wall at rear: 115mm
Specifications Type Colours Thermal input Gas type Efficiency rating Heats on average Fan Dimensions overall Height Width Depth

In-built (CANTIB-02)

In-built Metallic black baked enamel finish, optional gold trim 26 Mj/hr Natural/LPG 4 stars square metres (80m2) 3 speed Insert Fascia 600mm 650mm 695mm 850mm 300mm* 125mm (*Depth including flue spigot: 335mm)

Freestanding (CANTFS-02)

Free-standing/top flue Metallic black baked enamel finish, optional gold trim 26 Mj/hr Natural/LPG 4 starssquare metres (80m2) 3 speed 730mm 650mm 425mm Min distance from centre of flue to wall at rear of heater: Round-115mm. Square -103mm

Installation

For connection into a 10 amp socket or can be direct wired. Gas connection via a 12 copper compression fitting. Suitable for non-combustible or masonry/brick fireplaces only. Fire place opening: Max. Min. Height 645mm 605mm Width 840mm 700mm Depth 393mm Includes 50mm clearance between ( flue spigot and rear brickwork.)
In-built Powerflue (FITZPIBPWR-02)
Fire place opening: Max. Min. Height 650mm 610mm Width 840mm 710mm Depth 385mm Dimensions of flue and flue terminal Inner flue: 50mm diameter Outer flue: 100mm diameter Dimensions of flue terminal Cover plate: 200mm square Mesh cover: 150mm deep x 170mm dia. Maximum length of flue: 600mm Minimum length of flue: 130mm
See installation instructions for further details.
Freestanding (FITZPFS-02)
A 10 amp socket within 1.5m is needed for the fan. Gas connection via a 12 copper compression fitting. Heater does not require non-combustible base. Can be installed against a combustible wall with clearances of 40mm rear, 40mm side, 1000mm to ceiling and 900mm in front of heater. Optional accessories: Cathedral ceiling flue box. Flue kit comprising: 3 x 900mm lengths of 125mm dia. painted flue, 1 x 900mm length of 125mm dia. plain flue, 1 x ceiling ring, 1 x 125mm cowl.

General dimensions

For connection into a 10 amp socket or can be direct wired. Gas connection via a 12 copper compression fitting. Suitable for non-combustible or masonry/brick fireplaces only. Fire place opening: Max. Min. Height 645mm 605mm Width 840mm 700mm Depth 385mm ( Includes 50mm clearance between flue spigot and rear brickwork.)

Mock Fireplace Kit*

For connection into a 10 amp socket or can be direct wired. Gas connection via a 12 copper compression fitting. Use with In-built heater for installation into combustible materials i.e.timber, plasterboard etc. (Kit included with FITZPIBPWR-02 model) Canterbury In-built Fire place opening: Max. Height 645mm Width 840mm Depth 500mm Fitzroy Profile In-built Height 645mm Width 840mm Depth 550mm Min. 625mm 745mm 450mm 625mm 745mm 495mm
For installation into a combustible enclosure
Fitzroy Profile In-built Powerflue Height 645mm 630mm Width 840mm 745mm Depth 1040mm* 440mm
*Max depth determined by required flue length.
General dimensions General dimensions
Tested to M.O.T. 5.18.1-98 of AGA Code AS 4553-AG 103. 2 Depending on ceiling height, number of windows and insulation. Constant product development can lead to specification changes without notice. Note: The 4 Star Rating on the FITZPIB and CANTIB only applies to installation into a brick or masonry fireplace without a flue. When installed with a flue into a mock fireplace situation these models are rated at 3.7 stars.
Proudly manufactured and distributed by Sampford IXL.
For further details or advice, or to view our product range in one of our capital city showrooms please contact us on 421.
Sampford IXL 421 Smith Street FITZROY VIC 3065 Sampford IXL 162 Crown Street EAST SYDNEY NSW 2010 Sampford IXL 1/278 Scarborough Beach Road OSBORNE PARK WA 6017 Somerville Industries 3/15 Lamington Street NEW FARM QLD 4005 Marbill Services 3/448 Goodwood Road CUMBERLAND PARK SA 5041

www.cannonheaters.com.au

Constant product development may require specification changes without notice.

BRCAN0207