4 User-Controlled Shooting.53
S Program AE..54 R Shutter-Priority AE..56 E Aperture-Priority AE..58 Depth-of-field Preview.59 W Manual Exposure..60 Q Depth-of-field AE..62 Depth-of-field AE with a Manually-Selected AF Point.62 Depth-of-field AE with Eye Control.64 Exposure Compensation..67 LAuto Exposure Bracketing (AEB).68 Canceling AEB..69 jAE Lock..70 Bulb Exposures..71 4Multiple Exposures..72 HSelecting the Film Advance Mode.73 D Setting the ISO Film Speed..73 9Silencing the Beeper.74 bLCD Panel Illumination.74 Mirror Lockup..75 KWireless Remote Control..76 Using the Remote Switch.76
6 Custom Functions (C.Fn).83
GSetting a Custom Function.84 Custom Function Settings.85 Reference..89 Basic Photography Terms.89 Feature Availability Table..91 AE Lock Effects.92 AF Mode and Film Advance Mode Combination..92 Program Line..93 Troubleshooting Guide.94 Major Specifications..95 Index..98

Handling Cautions

Camera Care and Storage
The camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and should not be used in wet conditions or underwater. If the camera gets wet, take it to your nearest Canon dealer as soon as possible. If small amounts of water splash onto the camera, wipe it with a clean dry cloth. If the camera is exposed to salty air, wipe it thoroughly with a slightly damp cloth. Do not leave the camera in places prone to excessive heat such as in a car on a sunny day. Excessive heat can cause the camera to malfunction. The camera contains precision electronic circuitry. Never attempt to disassemble the camera. Use only a blower brush to blow away any dust on the lens, eyepiece, mirror, focusing screen, film compartment, etc. Do not clean the camera body or lens with any cleaner containing an organic solvent. For stubborn dirt, consult your nearest Canon dealer. The shutter curtains are extremely thin. Use only a blower to clean them. Be careful not to blow air too forcefully on the shutter curtains. The shutter curtains can be easily deformed or damaged. Also, when loading and unloading film, be careful not to touch the shutter curtains. Do not touch the electrical contacts with your fingers. Otherwise corrosion may develop on the contacts, resulting in improper camera operation. If the camera is not to be used for an extended period, remove the batteries. Store the camera in a well-ventilated, cool, dry place. During storage, press the shutter button once in a while to release the shutter a few times. Avoid storing the camera in a laboratory, cabinet, etc., where corrosive chemicals are present. If you have not used the camera for some time or if there is an important shoot, have the camera checked by your Canon dealer beforehand, or check for yourself that the camera components are working properly.

LCD Displays

LCD displays operate more slowly at low temperatures, and may appear dark at high temperatures. The display will return to normal at room temperature.

Batteries

Before installing the batteries, wipe the battery contacts to remove any fingerprints and smudges. This is to prevent faulty connections and corrosion. Never disassemble or recharge the batteries. Also, never store a battery in high-temperature places or short circuit the battery contacts or toss a battery into a fire. Although the batteries work well even at low temperatures, battery performance may decline slightly at freezing temperatures. In such a case, keep spare batteries warm in a pocket, etc., and use and warm the batteries alternately.
How Low Battery Levels Affect Camera Operation
On the LCD panel, if the <r> icon blinks or it is not displayed, a proper exposure can still be obtained as long as the shutter releases. However, when the battery level is low, the film advance and auto rewind might stop midway or not work at all and the <r> icon may blink on the LCD panel. After the batteries are replaced with new ones, film advance will be possible and film rewind can resume by pressing the <6> button.

Lens Electrical Contacts

After detaching the lens from the camera, put on the lens caps or put down the lens with the rear end up to avoid scratching the lens surface and electrical contacts.

Contacts

Quick Start Guide

Install the batteries.

Refer to the battery orientation diagram on the battery chamber cover, and insert two CR123A lithium batteries as shown. (p.18)

Attach a lens.

Align the red dots on the lens and camera and turn the lens as shown by the arrow until it snaps in place. (p.20)

Load the film.

Align the edge of the film leader with the orange mark on the camera and close the camera back until it snaps shut. (p.22) The film will advance to the first frame.

Focus the subject.

Aim the AF points on the main subject and press the shutter button halfway to autofocus. (p.21) Under low-light or backlit conditions, the built-in flash will pop-up and fire automatically. (p.78)
On the lens, set the focus mode switch to <AF>. (p.20)
Turn the Mode Dial to <Y> (Full Auto).
Keep pressing the Mode Dials lock button while turning the dial. (p.28)

Take the picture.

Press the shutter button completely to take the picture. (p.21)

Unload the film.

At the end of the roll, the film rewinds automatically. Open the camera back to remove the film cartridge. (p.24)

Nomenclature

Reference page numbers are in parentheses. The camera controls are indicated as icons in brackets < >.
AF mode dial (p.15, 38) **Eye Control switch (p.15, 43, 48) Red-eye reduction lamp / Self-timer/ Remote control lamp (p.32/33/76) LCD panel (p.12) <l> Main Dial (p.16) Shutter button (p.21) LCD panel illumination button (p.74) Remote control sensor (p.76) Grip / Battery compartment (p.18) Back cover release lever (p.22) Built-in flash / AF-assist beam (p.78/29) Flash-sync contact Hot shoe (p.81) Dioptric adjustment knob (p.25) Mode Dial lock release button (p.14) Mode Dial (p.14) Film advance mode lever (p.15, 33, 73)

Strap mount (p.17)

Mirror (p.75) Contacts (p.7)
Lens release button (p.20) Depth-of-field preview button (p.59) Lens lock pin Lens mount

Body cap (p.20)

Eyecup (p.25, 34) Viewfinder eyepiece *Date display panel (p.35) <0> Function button (p.23, 32, 68, 72, 73, 74, 80) <Z> Metering mode button (p.52) Film check window
<u> Quick Control Dial (p.16) <h> AF point selection key (p.41) <w AE lock (p.70) / ***FE lock / Custom Function setting button (p.84) <3> AF point selection button (p.41, 87)
Remote control terminal (p.76) <6 Midroll rewind button (p.24) *<q> button (p.35) *<6> button (p.36) *<7> button (p.36) Tripod socket Quick Control Dial switch (p.16) Battery compartment cover release lever (p.18)
* DATE Model only ** m Model only *** With an EX-series Speedlite.

Nomenclature LCD Panel

<K> Remote control mark Shutter speed (D - K, y) Depth-of-field AE (r) ISO film speed (U - F) Custom Function No. (p - P) **Calibration (u) ***FE lock (o) Metering mode Z Evaluative metering X Partial metering C Center-weighted averaging metering
<V> Custom Function Aperture value (Q - V) Red-eye reduction setting (W, E) Beeper setting (W, E) AEB amount (Z - C) DEP points (E, R) Custom Function setting (W - Y) **Calibration No. (E - Y)
<D> ISO film speed <F> Red-eye reduction <9> Beeper
AF point mark Battery level mark
<4> Multiple exposures <a> Flash exposure compensation <L> AEB
<5> Film mark Exposure level indicator Exposure compensation amount AEB level Flash exposure compensation amount Red-eye reduction lamp-on indicator Film transport indicator

To avoid taking blurred pictures, hold the camera steady to minimize camera shake.

Horizontal shooting

Vertical shooting
Firmly grasp the camera grip with your right hand, and press your both elbows lightly against your body. Hold the lens at the bottom with your left hand. Press the camera against your face and look through the viewfinder. To maintain a stable stance, place one foot in front of the other instead of lining up both feet.
The camera automatically senses whether it is in the horizontal or vertical position. The camera orientation sensor will make a small sound when you switch to vertical or horizontal shooting.

Fully Automatic Shooting

This chapter describes how to use the cameras Basic Zone modes <Y> <U> <I> <O> <P> <A> for quick and easy shooting. In these modes, all you do is point and shoot. Also, these modes override the cameras <l> <u> and AF Mode dials, film advance mode lever (except <p>), and buttons (except <0> <6> and the shutter button). This is to prevent spoiled shots caused by accidental operation of camera controls.
Turn the Mode Dial to <Y>, <U>, <I>, <O>, <P>, or <A>.
The picture-taking procedure is the same as with the <Y> Full Auto mode on page 28. The settings automatically set by the Basic Zone modes are shown in the Feature Availability Table on page 91.

n B a sic Zo

YFull Auto Mode
All you do is point the camera and press the shutter button. Everything is automatic so it is easy to photograph any subject. With seven AF points to focus the subject, you just point and shoot.
1 Turn the Mode Dial to <Y>. 2 Aim any of the AF points on the subject.
The main subject, as determined by
the camera, will be focused by one of the AF points. To focus a subject not covered by any of the AF points, see Focusing OffCenter Subjects on page 50.

AF point

subject. 3 Focus the shutter button halfway to Press the

focus.

s When
Shutter speed Aperture value
necessary, the built-in flash will pop up automatically. s The AF point that achieves focus will flash in red. The beeper will also sound and the focus confirmation light <n> in the viewfinder will light.
4 Check the exposure setting. The shutter speed and aperture
value will be set automatically and displayed in the viewfinder and on the LCD panel. (0)

Close-up

Use this mode to take close-up shots of flowers, insects, etc.
As much as possible, focus the subject at the
lens closest focusing distance.
To obtain a larger magnification, use the
telephoto end of a zoom lens.
For serious close-up shots, optional EOSs This
dedicated macro lenses are recommended. automatically sets the AF mode to <4>, the film advance mode to <J> (single-frame shooting), and the metering mode to <Z>.

P Sports

This is for fast-moving subjects when you want to freeze the action.
The camera will first track the subject with the
center AF point. Focus tracking will then continue with any of the seven AF points covering the subject. While you hold down the shutter button, focusing will continue for continuous shooting. Using a telephoto lens and ISO 400 or higher speed film is recommended. The focus confirmation light will not light even when focus is achieved. s This automatically sets the AF mode to <5>, the film advance mode to <H>, and the metering mode to <Z>.

Night Portrait

This mode is for taking pictures of people at twilight or at night. The flash illuminates the subject while a slow sync speed obtains a natural-looking exposure of the background.
If you want to photograph only a night scene
(without people), use the <I> mode instead.
Tell the subject to keep still even after the flash

fires.

automatically sets the AF mode to <4>, the film advance mode to <J> (single-frame shooting), and the metering mode to <Z>.
A blinking shutter speed indicates that the shutter speed is too slow to prevent a blurred picture caused by camera shake. Hold the camera steady and press the shutter button smoothly, or use a tripod. (The shutter speed indicator still blinks when you use a tripod, but camera shake will not be a problem.) In the <A> mode, use a tripod to prevent camera shake.
FUsing Red-eye Reduction (with the built-in flash)
When flash is used in a low-light environment, the subjects eyes may come out red in the photograph. Red eye happens when the light from the flash reflects off the retina of the eyes. The cameras red-eye reduction feature turns on the red-eye reduction lamp to shine a gentle light into the subjects eyes to narrow the pupil diameter or iris. A smaller pupil reduces the chances of red eye from occurring. Red-eye reduction can be set in any shooting mode except <I> <P>.
Move the <7> arrow to 1 icon on the LCD panel. the <F>

With C.Fn-04-2, holding down the <w> button will temporarily stop the AF operation in the AI Servo AF mode. (p.85)
AI Focus AF for Automatic AF Mode Switching
The AI Focus AF mode switches automatically from One-Shot AF to AI Servo AF if the subject starts to move. If focus is achieved in the One-Shot AF mode and the subject starts to move continuously, the camera will detect the movement and switch automatically to AI Servo AF to focus track the subject.

3Selecting an AF Point

The AF point is used for focusing. The AF point can be selected automatically by the camera or manually by you. In the Basic Zone modes and <Q> mode, the AF point selection is automatic only. In the <S> <R> <E> <W> modes, the AF point can be selected either automatically or manually.
Automatic AF Point Selection
The camera selects the AF point automatically to match the subject.
Manual AF Point Selection
You can select any of the seven AF points manually. This is best when you want to focus a particular subject, or to compose a particular shot quickly.

Eye Control (p.43 - 49)

Select one of the seven AF points by looking at it.
Basic Procedure for AF Point Selection
1 Set the Eye Control switch to <2>. the <3> button. (1) 2 Presscurrent AF point will be indicated The
on the LCD panel and in the viewfinder.
the 3 Selectat thedesired AForpoint.panel viewfinder LCD Look
and press the <h> key. the <h> keys on the left, right, top, or bottom to select the left, right, top, or bottom AF point respectively. To return to shooting, press the shutter button halfway or press the <3> button again.

sPress

If you use an external, EOS-dedicated Speedlite and focus cannot be achieved with the AF-assist beam, select the center AF point.

Automatic Selection

Display all AF points in red.
When you try to select an AF point
beyond a peripheral AF point, automatic focusing selection will be set.

Manual Selection

Display the desired AF point in red.
See the diagram on the left on how
the AF point selection changes with the <3> button. When you press the <3> button to switch from automatic AF point selection to manual AF point selection, the selection will start with the center AF point.
Automatic Selection Automatic Selection

Center AF point selected

C.Fn-10-1 can disable the AF point from flashing in red. (p.87) C.Fn-11-1 enables you to select a AF point directly with the <h> keys without having to press the <3> button first. (p.87) C.Fn-11-2 enables you to select a AF point with the <l> and <u> dials instead of the <h> keys. (p.87) C.Fn-12-1 can make the <3> button switch to the center AF point. (p.88)

the <w> button and 3 Press button simultaneously. <3>
CAL No. will start blinking to indicate that the calibration settings have been deleted.
gUsing Eye Control (m Model only)
With Eye Control, you just look at the AF point where you want to focus. Eye Control can be used in all shooting modes except <Y> (Full Auto). In the <Y> (Full Auto) mode, Eye Control information is also added to the automatic AF point selection program for more precise automatic AF point selection.
the CAL 2 Selectthe <l> No. to select your dial Turn
CAL No. Non-blinking number: Indicates registered calibration. Blinking number: Indicates unregistered calibration.
3 Set the Eye Control switch to <g>. a 4 Selecttheshooting mode. the Turn Mode Dial to select

desired shooting mode.

the AF mode 5 TurnAF mode. dial to select the
the focusing 6 Keep looking atto select and point you want press the shutter button halfway.
<m> icon lights in the viewfinder. sThe AF point you look at will flash in red and focus the subject.

7 Take the picture.

If the camera fails to detect which AF point you are looking at, the <m> icon in the viewfinder will blink and automatic AF point selection will take effect. If Eye Control does not work well, check if you are using the correct CAL No. and see Eye Control Calibration and Operation Tips on page 46.

Eye Control Servo AF

When you use Eye Control in the AI Servo AF mode (or AI Focus AF set to AI Servo AF), you can focus a moving subject continuously just by looking at it. This is called Eye Control Servo AF. If the subject focused with Eye Control starts to move, you can continue to focus-track the subject with your eye by looking at the next AF point covering the subject while holding down the shutter button halfway.

Turning Off Eye Control

Turn the Eye Control switch to <2>. The AF point can then be selected automatically or manually.
Focusing Off-Center Subjects
After achieving focus, you can lock the focus on a subject and recompose the shot. This is called focus lock. Focus lock works when the AF mode is set to One Shot AF.
1 Set the camera to a Creative Zone mode. 2 Select the desired AF point. the 3 Focusthe AFsubject. the subject, then point on Aim
press the shutter button halfway.
4 Keep pressing the shutter button halfway and recompose the

picture as desired.

5 Take the picture.
Focus lock also works in the Basic Zone modes (except <P>). Just start from step 3 above.
When Autofocus Fails (Manual Focusing)
Autofocus can fail to achieve focus (the focus confirmation light <n> blinks) with certain subjects such as the following:
Difficult Subjects for Autofocusing

R Shutter-Priority AE

In this mode, you set the shutter speed and the camera sets the aperture value automatically to suit the subject brightness. A fast shutter speed can freeze the motion of a fast-moving subject and a slow shutter speed can blur the subject to give the impression of motion. <R> stands for Time value which is the shutter speed.
Taken with a fast shutter speed.
Taken with a slow shutter speed.
1 Turn the Mode Dial to <R>.
the desired 2 Selectthe <l> dial.shutter speed. Turn

stop increments.

The shutter speed can be set in half-
shutter button 3 Press thethe subject. halfway to focus
aperture value is set automatically.
4 Check the viewfinder display and take the picture.
A correct exposure will be obtained
as long as the aperture value display is not blinking.
If the maximum aperture value blinks, it indicates underexposure. Turn the <l> dial to set a slower shutter speed until the blinking stops. If the minimum aperture value blinks, it indicates overexposure. Turn the <l> dial to set a faster shutter speed until the blinking stops.

Shutter Speed Display

The shutter speeds from D to R indicate the denominator of the fractional shutter speed. For example, S indicates 1/125 sec. Also, H indicates 0.7 sec, and J indicates 15 sec.

E Aperture-Priority AE

In this mode, you set the desired aperture value and the camera sets the shutter speed automatically to suit the subject brightness. The larger or brighter the aperture (lower f/number) the more blurred the background will become. This effect is ideal for portraits. The smaller or darker the aperture (higher f/number), the clearer the focus will be for both near and far objects (wider depth of field). <E> stands for aperture value.
Taken with a large aperture.
Taken with a small aperture.
1 Turn the Mode Dial to <E>.
the desired 2 Selectthe <l> dial.aperture value. Turn
The aperture value can be set in half-
shutter speed is set automatically.
as long as the shutter speed display does not blink.
If the slowest shutter speed blinks, it indicates underexposure. In such a case, turn the <l> dial to set a larger aperture value (smaller f/number) until the shutter speed display stops blinking. If the fastest shutter speed blinks, it indicates overexposure. In such a case, turn the <l> dial to set a smaller aperture value (larger f/number) until the shutter speed display stops blinking.

Depth-of-field AE with a Manually-Selected AF Point
Mode Dial to <Q>. 1 Turn the mode will be set The AF
automatically to <4>.
2 Turn the Eye Control switch to <2>. 3 Select the AF point. and use Press the <3> button
the <h> keys to select the AF point.
If automatic AF point selection has
been set, use the center AF point to focus.
the nearest 4 Focusthe selected AFsubject. the point on Aim
nearest subject, then press the shutter button. (0) sThe focus confirmation light <n> will light, and s will be displayed. In steps 4 and 5, pressing the shutter button completely will not take the picture.
5 Focus farthest. subject. Repeat step 4

will be displayed.

Steps 4 and 5 can also be done in

reverse order.

6 Compose the picture and press the shutter button halfway. (0)
optimum point of focus, aperture, and shutter speed to obtain the desired depth of field are set automatically. When you let go of the shutter button, the display will change to r. The exposure setting is set when the picture is taken.
7 Take the picture. of field will be The desired depth
obtained as long as the aperture value display does not blink. A correct exposure will be obtained as long as the shutter speed and aperture value displays do not blink.
Q Depth-of-field AE Depth-of-field AE with Eye Control (m Model only)
With Eye Control, you can easily set the desired depth of field without having to recompose so much.
1 Turn the Mode Dial to <Q>. 2 Set the Eye Control switch to <g>.

been set. (p.48)

Make sure the correct CAL No. has
3 Focusinthe nearest subject you want focus.
Look at the subject and press the
shutter button. (0) focus confirmation light <n> will light, and s will be displayed. In steps 3 and 4, pressing the shutter button completely will not take the picture.
4 Focusinthe farthest subject you want focus.

Repeat step 3.

Steps 3 and 4 can also be done in
5 Press the shutter button halfway. While looking at the AF point where
you want the exposure to be set, press the shutter button halfway. sThe optimum point of focus, aperture, and shutter speed to obtain the desired depth of field are set automatically. When you let go of the shutter button, the display will change to r. The exposure setting is set when the picture is taken.

6 Take the picture. display does not If the aperture value
blink, the desired depth of field will be obtained. A correct exposure will be obtained as long as the shutter speed and aperture displays do not blink.
If the aperture display blinks, it means that the desired depth of field cannot be obtained. Move further away from the subject or use the wide-angle end if you are using a zoom lens. Then try it again. If the K shutter speed and maximum aperture display blink, it means the subject is too dark. The <Q> mode cannot be used. If the D shutter speed and minimum aperture display blink, it means the subject is too bright. Attach an ND filter (sold separately) to reduce the light entering the lens.
If you are using a zoom lens, do not zoom before the picture is taken. If a slow shutter speed is set, use a tripod to prevent camera shake. The <Q> mode cannot be used if the lens focus mode switch is set <MF>. The result will be the same as using the <S> mode. The <Q> mode cannot be used if you use flash or remote control. The result will be the same as using the <S> mode with flash. If you are using the <Q> mode with a lens that has a focus-limiting switch, set the switch to minimum focusing distance -. To cancel <Q> at any time, turn the Mode Dial to any setting except <Q>. To check the depth of field while using depth-of-field AE, set DEP points 1 and 2 and press the shutter button halfway. Then press the depth-of-field preview button. To further increase the depth of field, use a wide-angle lens. Setting DEP points 1 and 2 at the same point on the subject will make the depth of field shallow. The foreground and background will then be blurred, making the subject stand out. Using a telephoto lens enhances this effect.

Exposure Compensation

Exposure compensation is used to alter the cameras standard exposure setting. You can make the picture look lighter (increased exposure) or darker (decreased exposure). The exposure compensation amount can be set up to +/2 stops in half-stop increments.
to a 1 Turn the Mode Dial <W>.Creative Zone mode except exposure setting. 2 Check the shutter button halfway and Press the

Using the Built-in Flash

In a Basic Zone Mode
In low-light or backlit conditions, the built-in flash will pop up and fire automatically (except in <I> <P> modes).

In a Creative Zone Mode

Just pop-up the built-in flash to fire the flash regardless of the ambient light level. S : Use this mode for automatic flash photography. The flash sync speed (within 1/60 sec. - 1/125 sec) and aperture value will be set automatically as with the <Y> (Full Auto) mode.
R : Use this mode if you want to set the flash sync speed manually (within 30 sec. - 1/125 sec.). The camera will set the flash aperture value automatically to obtain a correct flash exposure. E : Use this mode if you want to set the flash aperture value. The camera will set the flash sync speed (within 30 sec. 1/125 sec.) automatically to obtain the best exposure for the aperture you set. For portraits with a night scene or dark background, a slow sync speed will be set to obtain a proper exposure for both the subject and background. The flash illuminates the subject, while the background is properly exposed with a slow shutter speed. Because automatic slow-sync shooting uses a slow shutter speed, always use a tripod. W : Enables you to manually set the shutter speed (30 sec. 1/125 sec. or bulb) and aperture. The subject is properly exposed with the flash and the background is exposed with the flash sync speed and aperture value you have set.
Q : This mode gives the same flash result as the <S> mode.
Flash Distance Range (With EF28-105mm f/3.5-4.5)
ISO 400 28mm Negative Film 1 - 5.2 / 3.3 - 17.- 7.4 / 3.3 - 24.3 Slide Film 1 - 3.7 / 3.3 - 12.- 5.2 / 3.3 - 17.2 90mm Negative Film 1 - 4.0 / 3.3 - 13.- 5.7 / 3.3 - 18.- 8.1 / 3.3 - 26.8

[m/ft]

Slide Film 1 - 2.8 / 3.3 - 9.- 4.0 / 3.3 - 13.- 5.7 / 3.3 - 18.9
1 - 10.5 / 3.3 - 34.4 1.2 - 7.4 / 3.9 - 24.3
Use the built-in flash at least 1 meter (3.3 ft) away from the subject. Closer distances may result in the flash partially obstructed by the lens barrel. When using the built-in flash, detach any hood attached to the lens. A lens hood will partially obstruct the flash coverage. When a super telephoto lens or a fast, large-aperture lens is attached, the built-in flash coverage might be obstructed. Using an EOS-dedicated Speedlite is recommended. The built-in flashs flash coverage is suited for a 28mm lens. If you use a shorter wide-angle lens, the flash picture may look dark along the periphery. To retract the built-in flash, push it down. In <R> or <W> mode, even if you set the shutter speed faster than 1/125 sec. 1/125 sec. will be set automatically. If the camera finds it difficult to focus, the AF-assist beam will fire automatically (except <I> <P>). C.Fn-07-3 disables the built-in flash from firing. (p.86) C.Fn-06-1 enables 2nd-curtain sync with the built-in flash. (p.86) With C.Fn-09-1, the flash sync speed will be fixed at 1/125 sec. in the <E> mode. (p.87)

All the specifications above are based on Canons testing and measuring standards. Specifications and external appearance are subject to change without notice. Asterisked items apply to Eye Control models only.
AE...89 AE Lock..70, 92 AEB...68 AF Mode..38 AF Mode Dial.15 AF Point..41 AF point selection key..16 AF-Assist Beam..29 AI Focus AF..40 AI Servo AF..39 Aperture value..89 Attaching the Strap..17 A-TTL/TTL autoflash..81 Automatic Selection.42 Av..58
E-TTL II autoflash..81 Evaluative metering..52 Exposure..89 Exposure Compensation.67 External flash.81 Eye Control..43, 48 Eye Control Switch..15 Eyecup..25, 34 Eyepiece Cover..34
Film...22 Film Advance Mode.73 Film advance mode lever.15 Flash Exposure Compensation.80 Focus confirmation light..13 Focus lock...50 Full Auto..28 Function..11 Function Availability Table..91
Basic Photography Terms..89 Basic zone...14 Batteries..18 Battery Life..19 Beeper..74 Built-in flash..78 Bulb Exposures..71
Handling Cautions.6 Holding the Camera.26
C.Fn..83 CAL...43 Calibration Procedure..43 Center-weighted averaging metering.52 Checking the Battery Level..19 Close-up..30 Continuous shooting.73 Creative zone.14 Custom Functions..83
Image zone..14 ISO film speed..73, 89 ISO Speed..73, 89
Landscape...30 LCD Panel..7, 12 LCD Panel Illumination..74 Lens..20
Date/Time..35 DEP...62 Depth-of-field..59, 90 Dioptric Adjustment..25
M (Manual)..60 Main Dial..16 Major Specifications.95 Manual Focusing.51
Manual Selection.42 Metering Modes..52 MF..20, 51 Midroll Rewind..24 Mirror Lockup.75 Mode Dial..14 Multiple exposures..72
Red-eye Reduction..32 Remote Controller..76 Remote Switch..76 Replacing the Date Battery..36
Self-timer..33 Shooting modes..14 Shutter Button Halfway pressing..21 Full pressing..21 Shutter speed.89 Single-frame shooting..73 Speedlite..78, 81 Sports..31
Night Portrait..31 Nomenclature.10

One-Shot AF..39

P (Program)..54 Partial metering..52 Portrait..30 Predictive AF..40 Program AE..54 Program Line..93 Program Shift.55

Tv..56

Viewfinder...13
Quick Control Dial..16 Quick Start Guide..8
Wireless Remote Control.76

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Consult the dealer or an experienced radio/TV technician for help. This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled Digital Apparatus, ICES-003 of the Industry Canada.
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
U.S.A. CANON U.S.A. INC. For all inquiries concerning this camera, call toll free in the U.S. 1-800-OK-CANON or write to: Customer Relations, Canon U.S.A., Inc. One Canon Plaza, Lake Success, N.Y. 11042-1198 CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, Cte-de-Liesse, Montral Qubec H4T 1V7, Canada CANON CANADA INC. CALGARY OFFICE 2828, 16th Street, N.E. Calgary, Alberta T2E 7K7, Canada For all inquiries concerning this camera, call toll free in Canada 1-800-OK-CANON CANON EUROPA N.V. Bovenkerkerweg 59-61, P.O. Box 2262, 1180 EG Amstelveen, The Netherlands CANON COMMUNICATION & IMAGE FRANCE S.A. 102, Avenue du Gnral de Gaulle 92257 La Garenne-Colombes Cedex, France CANON UK LTD. Woodhatch Reigate Surrey RH2 8BF, United Kingdom CANON DEUTSCHLAND GmbH Europark Fichtenhain A10, 47807 Krefeld, Germany CANON ITALIA S.p.A. Via Milano 8 I-20097 San Donato Milanese, Milano, Italy CANON Schweiz AG Geschftsbereich Wiederverkauf, Industriestrasse 12, CH-8305 Dietlikon, Switzerland CANON G. m. b. H. Oberlaaerstrasse 233, 4th floor, 1100 Wien, Austria CANON Espaa, S. A. C/Joaqun Costa, 41, 28002 Madrid, Spain SEQUE Soc. Nac. de Equip., Lda., Praa da Alegria, 58, 2, 1269-149 Lisboa, Portugal CANON LATIN AMERICA, INC. DEPTO DE VENTAS 703 Waterford Way Suite 400 Miami, FL 33126 U.S.A. CANON LATIN AMERICA, INC. CENTRO DE SERVICIO Y REPARACION Apartado 2019, Zona Libre de Coln, Repblica de Panam CANON HONGKONG CO., LTD. 9/F, The Hong Kong Club Building, 3A Chater Road, Central, Hong Kong CANON SINGAPORE PTE. LTD. 79 Anson Road #09-01/06 Singapore 079906 CANON AUSTRALIA PTY. LTD. 1 Thomas Holt Drive, North Ryde, N.S.W. 2113, Australia CANON NEW ZEALAND LTD. Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand CANON SALES CO., INC. 16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan