Replaying... 113

Displaying Images Individually... 113 Magnifying Images.. 114 Viewing Nine Images at a Time (Index Replay). 115 Jumping Between Images.. 116 Viewing Movies... 117 Editing Movies... 119 Rotating Images in the Display.. 121 Attaching Sound Annotations to Images.. 122 Automated Playback (Slide Show).. 124

Protecting Images... 128

Erasing... 129
Erasing Images Individually... 129 Erasing All Images... 130 Formatting a CF Card... 131

Printing... 132

About Printing... 132 Selecting from the Print Menu... 134 Connecting the Camera to a Printer.. 136 Printing... 139 Setting the Print Settings (Direct Print Function).. 141 Print Settings (DPOF Print Settings)... 145 Printing with DPOF Print Settings.. 150
Image Transfer Settings (DPOF Transfer Order). 152
Selecting Images for Transferring.. 152
Viewing Images on a TV Set... 154 Downloading Images to a Computer.. 155
Connecting the Camera to a Computer Via the USB Cable. 155 Downloading Directly from a CF Card.. 157
List of Menu Options and Messages.. 158
Rec. Menu... 158 Replay Menu... 161 Set up Menu... 162 My Camera Menu... 166 Resetting the Settings to Default.. 168 List of Error / Message Codes.. 169 List of Messages... 170

Appendix... 174

Using the Wireless Controller.. 174 Using an Externally Mounted Flash (Optional). 177 Using Conversion Lenses (Optional) / Close-up Lenses (Optional). 183 Using a Charge Adapter / Car Battery Cable Kit (Optional). 186 Replacing the Date Battery... 188 Camera Care and Maintenance... 190 Troubleshooting... 191
Specifications... 194 Index.... 201 Functions Available in Each Shooting Mode. 208

Read This First

Please Read
Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly. Please note that Canon, its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including CompactFlash cards, that results in the failure of an image to be recorded or to be recorded in a format that is machine sensible. Warning Against Copyright Infringement Please note that Canon digital cameras are intended for personal use and should never be used in a manner that infringes upon or contravenes international or domestic copyright laws and regulations. Please be advised that in certain cases the copying of images from performances, exhibitions, or commercial properties by means of a camera or other device may contravene copyright or other legal rights even if the image was shot for personal use. Warranty Limitations This cameras warranty is only effective in the country of sale. If a problem arises while the camera is in use abroad, please convey it back to the country of sale before proceeding with a warranty claim to a Canon Customer Support Help Desk. For Canon Customer Support contacts, please see the Canon Limited Warranty supplied with your camera.

*Only displays when connected to the compact power adapter.
Lower Indicator Yellow: Blinking Yellow:
Macro mode / Manual focus mode Focusing difficulty (although you can press the shutter button, try using focus lock or adjusting the focus manually, p. 106)

Strap Mount (p. 27)

Controls
(Continuous)/ (Self-Timer/Wireless Controller) Button (p. 70, 73, 174) Zoom Lever Shooting: (Telephoto)/ (Wide Angle) (p. 41) Replay: (Zoom in)/ (Zoom out)(p. 114)
Shutter Button (p. 39) Mode Dial (p. 13) Power/Mode Indicator (p. 28) Mode Lever (p. 28) Button (p. 29)

(Macro)/

(Jump) Button (p. 69, 116)
(Manual Focus) / (Microphone) Button (p. 105, 106, 122)
(Light Metering) Button (p. 83)
(Flash) / (Index) Button (p.60, 115)
Omni Selector (C/ [Exposure], D/ WB [White Balance], B, A) (p.85, 86)

(Menu) Button (p. 43)

(Function) Button (p. 42)
(Set)/ (AF Frame Selector) Button (p. 82)

(Display) Button (p. 33)

(AE Lock/FE Lock) / (Erase) Button (p. 97, 99, 129)

Mode Dial

Use the mode dial to switch between the shooting modes.

ative Zone Cre

: Auto (p. 51) The camera automatically selects settings.

e Zone

Image Zone The camera automatically selects settings according to the image composition type. : Portrait (p. 63) : Landscape (p. 63) : Night Scene (p. 64) : Stitch Assist (p. 65) : Movie (p. 68) Creative Zone The user selects exposure, aperture or other settings to achieve special effects. : Program AE (p. 75) : Shutter Speed-Priority AE (p. 77) : Aperture-Priority AE (p. 79) : Manual Exposure (p. 81) : Custom 1 (p. 109) : Custom 2 (p. 109)

Main Dial

The main dial is used for selecting certain menus and for displaying images. You can easily and swiftly select, confirm and switch menus.

Turning the Main Dial

In Shooting Mode
Selects Aperture value and shutter speed (p. 77, 79) Selects menu settings by pressing the FUNC. button (p. 42) Selects exposure compensation and white balance (p. 85, 86) Manually sets the focus (p. 106)

In Replay Mode

Display the previous and next image (p. 113)

Clicking the Main Dial

The camera shake warning icon will appear on the LCD monitor in low light conditions while the camera is preparing to shoot. When this icon appears, set the flash to On or Auto, or fix the camera to a tripod to shoot.
2 Replaying Mode Pressing the button cycles the information view mode each time the button is pressed. Single Replay (p. 113):Simple Display Detailed Display No Display
Index Replay (p. 115): Simple Display No Display
Information Displayed on the LCD Monitor
The LCD monitor displays information in Shooting or Replaying mode, such as the camera settings, remaining image capacity and shooting date / time. 2 Shooting Mode
MF (Manual Focus) Indicator
The following displays in information view.
Exposure Compensation White Balance (WB) Drive Mode ISO Speed Photo Effect Bracket
p. 70, 73 p. 92 p. 89 p. 93, 95
Flash Exposure Compensation / p. 100 Flash output
Aperture Recordable Value Images or Shutter Speed Recordable Movie Time AF Frame (sec.) Spot Metering Frame

L M1 M2 S

4.0x 5.1x 6.5x 8.1x 10x 12x 16x
Compression Settings Resolution Settings File Format Digital Zoom Setting* Low Battery Flash Red-eye Reduction Macro Mode Light Metering Mode Auto Rotate Shooting Mode
p. 55 p. 55 p. 58 p. 72 p. 20 p. 60 p. 61 p. 69 p. 83 p. 111 p. 13 p.110 p. 34 p. 97, 99 p. 105, 106 p. 68
ND Filter Camera Shake Warning AE Lock/FE Lock Manual Focus Movie Recording Mode
The icons in the shaded boxes above appear even when the information view is turned off. In addition to the above, the message, shutter speed, AF frame , Spot Light Metering Frame, aperture value and MF indicator (when manual focus is selected) are shown as in the example to the upper left. * Zoom powers reflect the combined optical and digital zoom effects. These figures appear when the digital zoom is activated. (4.0x is the telephoto-end setting of the optical zoom.)

2 Replaying Mode

File Number
In simple display mode, the following information appears.
Compression Settings Resolution Settings (still image) File Format Sound annotation (wave file) Movie Protection Status p. 55 p. 55 p. 58 p. 122 p. 117 p. 128
Image Number Shooting Date / Time and Total (Display Image/ Total)
In detailed display mode, the following information also appears.
ISO Speed Photo Effect Shooting Mode Resolution Settings (Movie) Exposure level Flash Exposure Compensation White Balance Light Metering Mode Macro Mode Manual Focus p. 92 p. 89 p. 13 p. 55 p. 85 p. 100 p. 86 p. 83 p. 69 p. 105, 106
Aperture Value Shutter Speed Histogram

Movie Length

In addition to the above, the shutter speed, aperture setting, movie length, histogram and overexposure warning appear.

Registering the My Camera Settings
Images recorded onto the CF card and newly recorded sounds can be added as My and menu items. You can also use the supplied Camera settings to the software to upload your computers images and sounds to the camera. The following menu items can be saved to the camera. Start-up Image Start-up Sound Operation Sound Selftimer Sound Shutter Sound
Registering CF Card Images and Sounds
1 Turn the mode lever to 2 Press the

(Replay).

The camera switches to Replaying mode.
(My Camera)] menu 3 Select the [ on the omni selector. using the A arrow
menu item you wish 4 Select thethe omni selector. to register using the C or D arrow on
Select or using 5 on the omni selector.the B or A arrow

appears.

An image appears. [Start-up Image] Step 7a, 8a [Start-up Sound], [Shutter Sound], [Selftimer Sound] Step 7b, 8b
wish to 7a Select the image youor A arrow or register using the B on the omni selector.
8a Press the button. (Record) using the 7b Select on the omni selector.B or A arrow
Recording starts. Recording stops when the set amount of time has passed. Start-up Sound: 1 second, Operation Sound: 0.3 second, Selftimer Sound: 2 seconds, Shutter Sound: 0.3 second.
(Register) using the or 8b Select on the omni selectorBand A arrow press the
button. Select [OK] using or arrow 9 the omni selectorthe BpressAthe on and
Registering the My Camera Settings (continued)
Movie and RAW image sounds recorded with the Sound Annotation function (p. 122) cannot be registered. When you register new My Camera settings, the previously registered settings are erased.
File Format of My Camera Settings
My Camera settings should conform to the below file formats. However, CF card images shot with this camera can be registered as My Camera settings regardless of the below formats. Start-up Image
Recording image format Sampling rate Image size File capacity Recording format Quantization bit Sampling frequency Recording time JPEG (Base line JPEG) 4:2:0 or 4:2:x 240 pixels 20 KB or less WAVE (monaural) 8 bit 11.025 kHz and 8.000 kHz
Start-up Sound, Operation Sound, Selftimer Sound and Shutter Sound
Start-up Sound Operation Sound Selftimer Sound Shutter Sound
11.025 kHz 1.0 sec. or less 0.3 sec. or less 2.0 sec. or less 0.3 sec. or less
8.000 kHz 1.3 sec. or less 0.4 sec. or less 2.0 sec. or less 0.4 sec. or less
Any file format other than those described above cannot be used with this camera.
An example of this function is to record Say cheese as a self-timer sound so the camera will replay this sound 2 seconds before the photo is taken. You could also record cheerful music to bring out the natural smiles of your subjects, or so they can strike a pose fitting the music. In these ways you can customize your camera by creating and adding new My Camera settings. See the supplied Software Starter Guide for more information on creating and adding My Camera Settings files.

* The JPEG format image will not be saved.
1 Right after shooting, press the is displayed on the LCD monitor.

button while the image

or arrow 2 Select [OK] using the BpressAthe on the omni selector and
The image is recorded in the RAW format. When you press the shutter button halfway, the camera returns to the shooting screen.
Reviewing an Image Right after Shooting (continued)
The above operations cannot be performed if the image was shot with the digital is already selected as the recording format. zoom or when
Changing the Image Display Duration
The length of time images are displayed after a photo has been taken can be changed anywhere from 2 seconds to 10 seconds or turned off.

1 In the [

(Rec.)] menu, select [Review].
See Selecting Menus and Settings (p. 42).
Review 2 Select abutton. setting and press the
With the [Off] option, the image will not automatically display. With the [2 sec.] to [10 sec.] options, the image will appear for the time selected even if the shutter button is released. You can continue to display the image as long as the shutter button is held down regardless of the Review setting. Another picture can be taken even while the last is displayed.
Changing the Resolution and Compression
You can change the resolution and compression (excluding movies) settings to suit the purpose of the image you are about to shoot. To record the CCD output without compression, select the RAW file format (p. 58).
Resolution L (Large) M1 (Medium 1) M2 (Medium 2) S (Small) 2592 x 1944 pixels 1600 x 1200 pixels 1024 x 768 pixels 640 x 480 pixels Purpose
Print A4 size* 210 x 297 mm (8.3 x 11.7 in.) or larger prints High Print letter size* 216 x 279 mm (8.5 x 11 in.) or larger prints Print postcard size 148 x 100 mm (6 x 4 in.) prints Print L size 119 x 89 mm (4.7 x 3.5 in.) prints Print card size 86 x 54 mm (3.4 x 2.1 in.) prints
*Paper sizes vary according to region.
Compression Superfine Fine Normal Normal High Quality
Purpose Shoot higher quality images Shoot normal quality images Shoot more images
Movies can be shot with the following resolution.

Resolution

320 x 240 pixels

160 x 120 pixels

button to turn the LCD monitor on.
Settings can be changed even if the LCD monitor is off.
2 Press the button. using 3 Select or*D arrow onor *omni selector. the C the
(Compression) (Resolution)
* The current setting is displayed.

Low Shoot more images

Send images as e-mail attachments
Changing the Resolution and Compression (continued)
4 Selecttothe resolution or compression you wish set using the main dial or the B
or A arrow on the omni selector.
You can shoot the image right after selecting settings by pressing the shutter button. This screen will appear again, once the image is shot.

(LCD monitor) (Display Panel)
Select RAW or (r) 5 the B or A arrow on the omni selector. using the main dial or
(LCD monitor) (Display panel)
You can shoot the image right after selecting settings by pressing the shutter button. The previous screen will appear again, once the image is shot.
appears on the LCD monitor.

7 Shoot the image.

Images shot in the JPEG format can also be changed to the RAW format while they are displayed right after shooting (p. 53).

Using the Flash

Use the flash according to the guidelines below.
* Red-eye reduction, Auto * Auto The flash fires automatically as required by the lighting level, and the red-eye reduction lamp fires each time the main flash fires The flash fires automatically as required by the lighting level. The red-eye reduction lamp and the flash always fire. The flash always fires. The flash does not fire.
* Red-eye reduction, Flash on Flash on Flash off
* No icon appears in the display panel.
For information on the external flash, see page 177.
the 1 Press modes.button to switch between flash
The selected flash mode appears on the display panel. It also appears on the LCD monitor if it is on. You can switch between settings by pressing the button. When the red-eye reduction function is on (p. 61)
When the red-eye reduction function is off (p. 61)

2 Shoot the image.

The flash will fire if the indicator beside the viewfinder lights orange when the shutter button is pressed halfway (The flash does not fire in ). mode (p. 51). Shooting procedures are the same as for the
Some settings are not available with certain Shooting modes. Please refer to Functions Available in Each Shooting Mode (p. 208).
Setting the Red-eye Reduction Function
The red-eye reduction lamp fires when the flash is used in dark areas. This prevents light from reflecting back from the eyes and making them appear red.
(Rec)] menu, set [Red-eye] to [On].

Setting the Shutter Speed
When you set the shutter speed in the shutter speed-priority AE mode, the camera automatically selects an aperture value to match the brightness. Faster shutter speeds allow you to catch an instantaneous image of a moving subject while slower speeds create a flowing effect and allow you to shoot without a flash in dark areas.
The shutter speed will show in the display panel. It will also appear on the LCD monitor if it is on.
Turn the main dial and select a shutter speed.
The correct exposure has been set if the shutter speed and aperture value show in white in the LCD monitor.
If the aperture value is shown in red in the LCD monitor, the image is under exposed (insufficient light) or overexposed (too much light). Adjust the shutter speed using the main dial until the aperture value display turns to white. The nature of CCD image sensors is such that noise in the recorded image increases at slow shutter speeds. This camera, however, applies special processing to images shot at shutter speeds slower than 1.3 seconds to eliminate the noise, thereby producing high-quality images. Nevertheless, a certain amount of processing time may be required before the next image can be shot.
Setting the Shutter Speed (continued)
Functions Available in Each Shooting Mode (p. 208) Please note that camera shake becomes a factor at low shutter speeds. If the camera shake warning appears in the center of the LCD monitor, secure the camera to a tripod before shooting. The fastest shutter speed for flash synchronization is 1/250 second. The camera automatically resets the shutter speed to 1/250 second if a faster speed is selected. The aperture value and shutter speed change according to the zoom state as follows. Aperture Wide Angle Telephoto F 2.0 - 3.5 F 4.0 - 8.0 F 3.0 - 5.0 F 5.6 - 8.0 Shutter Speed (seconds) to 1/1250 to 1/2000 to 1/1250 to 1/2000
Shutter Speed Display The shutter speeds from 2000 to 4 in the display panel are actually the denominator of a fraction of a second. For example, 160 indicates a speed of 1/160 second. For slower speeds, quote marks indicate the decimal place, so that 0"3 indicates 0.3 second and 2" indicates 2 seconds.
13 0"3 4" 4 0"4 0"5 0"6 0"8 1" 1"3 1"6 2" 2"5 3"2 5" 6" 8" 10" 13" 15"

The settings can be adjusted in 1/3 steps in the range of -2EV to +2EV. You can shoot the image right after selecting settings by pressing the shutter button. This screen will appear again, once the image is shot.

3 Press

or click the main dial.

using the main

To cancel the exposure compensation, return the setting to dial or the B or A arrow on the omni selector.

4 Shoot the image.

a the main dial or 2 Select orsetting using the omni selector. the B A arrow on
Setting the White Balance
When the white balance mode is set to match the light source, the camera reproduces colors more accurately.
Auto Daylight Cloudy Tungsten Settings are automatically set by the camera For recording outdoors on a bright day For recording under overcast, shady or twilight skies For recording under tungsten and bulb-type 3-wavelength fluorescent lighting
Fluorescent For recording under warm-white, cool-white or warm-white (3-wavelength) fluorescent lighting Fluorescent H For recording under daylight fluorescent, or daylight fluorescent-type 3-wavelength fluorescent lighting

Flash Custom1 Custom2

For flash photography For setting a custom value with a white sheet of paper, etc., to obtain the optimal white balance for the conditions. There are two custom values: custom1 and custom2.
(D on the omni selector).
The current white balance mode will appear in the display panel. The white balance settings menu will appear in the LCD monitor if it is on.
using 2 Select the desired settingon thethe main dial or the B or A arrow omni selector.
Please see the next page regarding the custom setting. You can shoot the image right after selecting settings by pressing the shutter button. This screen will appear again, once the image is shot.
3 Press or click the main dial. 4 Shoot the image.
The white balance cannot be adjusted when the photo effect is set to (B/W).

(Sepia) or

Setting a Custom White Balance
You can set a custom white balance to obtain the optimal setting for the shooting conditions by having the camera evaluate a subject such as a white piece of paper or cloth, or a photo-quality gray card. You can set two different custom settings. In the following cases the white balance may not be correctly adjusted in (Auto), shoot after reading the white balance data in (Custom). Shooting close-ups Shooting subjects of monotone color (such as sky, sea or forest) Shooting with a peculiar source of light (such as a mercury-vapor lamp)

Locking the Flash Exposure Setting (FE Lock)
You can obtain the correct exposure regardless of the location of your subject in the composition.
button to turn on the LCD monitor. (Flash) button and set the flash to fire (p. 60).
If you are using an externally mounted flash, please refer to its manual for setting instructions.
AF or the metering frame on the subject 3 Focus the youframeto lock spotflash exposure setting and press on which wish the the shutter button halfway.
4 While pressing the shutter button halfway, press the
The flash exposure compensation setting locks (FE lock) and the icon appears on the Display Panel and on the LCD monitor. The flash will fire a pre-flash and lock the flash exposure to the required intensity to illuminate the subject. (Each time you press the button, the flash exposure locks at the required intensity for that composition.) Using any button, lever or switch other than the main dial cancels the FE lock.
5 Recompose the image and shoot.
The FE lock only functions with the built-in flash, an externally mounted EX series Speedlite, a Macro Ring Lite or a Macro Twin Lite. The FE lock function is not available when [Flash Adjust] is set to [Manual]. Some settings are not available depending on the Shooting mode. Please refer to Functions Available in Each Shooting Mode (p. 208).
Switching between Flash Adjustment Settings
The built-in flash and the externally mounted flash* fire with automatic flash adjustments (except in the mode), but it is possible to set them so that they fire without any adjustments.
*Speedlite 220EX/380EX/420EX/550EX, Macro Ring Lite MR-14EX, Macro Twin Lite MT-24EX
1 Select [Flash Adjust] from the [

(Rec.)] menu.

2 Select [Auto] or [Manual] and press the
Compensating the Flash Adjustment (

(Flash))

The flash adjustment can be changed when [Flash Adjust] is set to [Auto]. The settings can be adjusted in 1/3-stop increments in the range of 2EV to +2EV. You can enjoy flash photography with exposure adjustments with the combined use of the cameras exposure compensation function.
button to turn on the LCD monitor. 1 Press the 2 Press the button. 3 Select using the C or D arrow on the omni selector. the compensation using 4 Adjust the B or A arrow on thethe main dial or omni selector.
e.g. Flash Adjustment Settings
using the main dial or the
To cancel the compensation, return the setting to B or A arrow on the omni selector.
Compensating the Flash Output.
In mode or when [Flash Adjust] is set to [Manual], the flash output can be controlled in three steps, starting from FULL, when shooting. This setting is also active with slave flash photography where multiple flashes are fired at the subject from different positions because the pre-flash does not fire. When an externally mounted flash is attached, its flash output can be controlled (Up to 1/16 from Full, in 1/3 steps).

arrow to select [Show 1], [Show 2] or [Show 3]. D, and or 3 Press theand pressBthe A arrow on the omni selector to choose [Select] button.
4 Mark images to include in the show.
Movie images play for the length of time that they were recorded regardless of the time set in the slide show settings. The power-saving function is disabled while a slide show plays on the camera (p. 30).
A check mark will appear beside a show already containing images.
Single Replay Move between images using the main dial or the B or A arrow on the omni selector and mark or remove marks from images using the C or D arrow on the omni selector. The selection number and a check mark appear at the top of selected images.
Index Replay button to switch to index replay (3 Press the images). Select an image using the main dial or the B or A arrow on the omni selector and mark or remove marks from images using the C or D arrow on the omni selector. The selection number and a check mark appears at the bottom of selected images.
Automated Playback (Slide Show) (continued)
After you press the button, you can select all the images by selecting [Mark all] using C or D on the omni selector and pressing the button again. (You can deselect all the images by selecting [Clear all].) You can select images using the main dial or the B or A arrow on the omni selector and change the settings using the C or D arrow on the omni selector after [Mark all] or [Clear all] has been selected.

Play Time Repeat

The image selection screen will close.
Adjusting the Play Time and Repeat Settings
You can change the play time for all the images in a show and have the show repeat itself continuously.
Sets the duration that each image in a slide show is displayed. The options are any one of 3-10 seconds, 15 seconds, 30 seconds and Manual. Sets whether the slide show stops when all the slides have been displayed or continues to display until stopped.
1 Display the slide show menu. or arrow 2 Select [Set up] using the BpressAthe on the omni selector and
button. or 3 SelectD[Play Time]the[Repeat] using the C or arrow on omni selector.
4 Select a setting using the B or A arrow on the omni selector.
Play Time Select a play time.
Repeat Select [On] or [Off].

The set up menu closes.

The display interval may vary somewhat for some images. Slide shows can be easily edited on a computer with the supplied software. See the Software Starter Guide.

Protecting Images

You can protect important images from accidental erasure.
(Replay)] menu, 1 In the [ and press the select [Protect] button.

The images are stored in the [xxxCANON] folders located under the [DCIM] folder (where xxx is a three-digit number from 100 to 998).
It is recommended to power the camera with the optional Compact Power Adapter CA-560 when connected to a computer (p. 162). If you disconnect the USB cable while the camera is on, the camera will automatically turn off. All procedures performed with a connection to a USB 2.0 compliant board are not guaranteed.
Downloading Directly from a CF Card
Eject the CF card from the camera, and insert it into a CF card reader connected to the computer.
If you are using a PC card reader, first insert the CF card into a PC card adapter (optional), and then insert the PC card adapter into the computers PC card reader.
List of Menu Options and Messages

Rec. Menu

* Some items may not appear in certain shooting modes (p. 208).

*Default setting

Item Flash Sync

Menu Screen

Settings Content Sets the timing at which the flash fires. 1st-curtain* 2nd-curtain

Reference Page 102

Slow Synchro
Sets the slow synchro. On Off*

Flash Adjust

Sets whether or not the flash is adjusted automatically. Auto* Manual

Red-eye

Sets whether or not the red-eye reduction lamp fires. On* Off

Cont. Shooting

Sets the continuous shooting option. (Standard)* (High speed)

Self-timer

Sets the duration before the self-timer releases the shutter once the shutter button is pressed. 2 seconds 10 seconds*

Item Wireless Delay

Settings Content Sets the duration before the self-timer releases the shutter once the remote control shutter button is pressed. 0 seconds 2 seconds* 10 seconds Sets the Spot AE Point option, Center (the AE point is fixed to the center) or AF Point (the AE point corresponds to the AF point). Center* AF Point Sets the ND filter. On Off*

Display the previous image Replay the movie images Display the next image
The operable range of the wireless controller will shorten under the following circumstances. - When the wireless controller is used at an angle to the remote sensor. - When strong light strikes the camera. - When the battery is weak.
The movie editing and printing functions are not available.
Using an Externally Mounted Flash (Optional)
You can make your flash photography even clearer and more natural appearing with the use of a separately sold externally mounted flash. The cameras auto exposure function will operate with a Canon Speedlite 220EX, 380EX, 420EX, 550EX, a Macro Ring Lite MR-14EX or a Macro Twin Lite MT-24EX (p. 180). (Except with the mode or when [Flash Adjust] is set to [Manual].) Other flashes may fire manually or not fire at all. Please check the manual for your flash. Certain functions noted in the manuals for the Canon Speedlite 220EX, 380EX, 420EX, 550EX, the Macro Ring Lite MR-14EX and Macro Twin Lite MT-24EX cannot be performed when mounted on this camera. Please read this guide before using one of these flashes on the camera.
Attach the flash to the cameras hot shoe.
2 Turn the external flash on and turn the mode lever to (Shooting).
3 Turn the mode dial to a position other than
Speedlite 220EX, 380EX, 420EX, 550EX, Macro Ring Lite MR-14EX or Macro Twin Lite MT-24EX , , , , , The flash will automatically adjust its output in the and modes when [Flash Adjust] is set to [Auto]. The maximum flash synchro shutter speed is 1/250 second. In mode or when [Flash Adjust] is set to [Manual], the flash will fire with manual adjustments. The maximum flash synchro shutter speed in this case is 1/250 second. Set the aperture to an appropriate value according to the flashs guide number and the distance to the subject. Check the cameras ISO sensitivity setting since the flashs guide number will change with the ISO value.
Using an Externally Mounted Flash (Optional) (continued)
When [Flash Adjust] is set to [Manual], the flash output can be adjusted. When [Flash Adjust] is set to [Auto] the flash exposure compensation can be adjusted (p. 100). In mode or when [Flash Adjust] is set to [Manual], the output of an externally mounted flash can be adjusted in the flash output adjustment screen (p. 101). When a Speedlite 550EX, a Macro Ring Lite MR-14EX or a Macro Twin Lite MT-24EX is mounted on the camera, you can adjust the flash output from either the flash or the camera. To set it from the flash, you are recommended to use the flashs manual mode. You can also adjust the flash output even when the camera is set to the E-TTL automatic flash exposure compensation mode by changing the flash exposure compensation setting. In this situation, the +2 step setting fires the flash at full intensity. To shoot with the flash, you are recommended to set the white balance to (Flash) setting. the

An externally mounted flash may not automatically adjust its output when a conversion lens is mounted on the camera. Do not attach filters or lens hoods to the wide converter or tele-converter. When using the built-in flash to shoot, a portion of the image may be blocked by the wide converter or tele-converter and appear dark. When using the viewfinder to shoot, a portion of the image in the viewfinder may appear to be blocked by the wide converter or tele-converter. Use the wide converter lens with the focal length set to the maximum wide angle setting. Use the tele-converter lens with the focal length set to the maximum telephoto setting. At other zoom settings, the image will not appear correctly.
Using Conversion Lenses (Optional) / Close-up Lenses (Optional) (continued)
Close-up Lens 250D (58 mm) This lens, with a 58 mm-threaded diameter, makes macro shooting easier. With the camera in macro mode, it can shoot subjects as close as 10 cm (3.9 in.) from the lens tip.
You are recommended to use Macro Ring Lite MR-14EX or Macro Twin Lite MT24EX for flash photography with the close-up lens mounted on the camera. (If you plan to attach Macro Ring Lite MR-14EX, first attach Macro Lite Adapter 58C (sold separately) to Close-up Lens 250D.) When using the built-in flash to shoot, a portion of the image in the viewfinder may appear to be blocked by the wide converter or tele-converter and appear dark. When using the viewfinder to shoot, a portion of the image in the viewfinder may appear to be blocked by the wide converter or tele-converter. Set the focal length of the cameras lens to telephoto when using the close-up lens.

Mounting the Lenses

Press the ring release button and remove the ring from around the lens on the camera body.
Attach the conversion lens adapter so that its meets the cameras and turn it in the direction of the arrow.
Wide-Converter WC-DC58N mounted
Screw on the lens in the direction of the arrows.
Since the image seen in the viewfinder does not change when a conversion lens is installed, use the LCD monitor to compose images. Please note that the images will not merge properly with the PhotoStitch program mode with a conversion or close-up lens. on a computer when they are shot in To protect the conversion lenses, hold them with one hand while you screw them on the camera with the other hand. Completely remove all dust and dirt from conversion lenses with a lens blower brush before use. The camera may focus on any dirt that remains. Exercise due caution when handling the conversion lenses since it is easy to dirty them with fingerprints.

0-360 Panoramic Optic Setup for Canon PowerShot G3/G5/G6
1) Mount camera on tripod, securely, with lens pointing vertically. 2) Press Ring Release Button on front of camera and unscrew lens ring. Replace with thread adapter. Thread 0-360 Optic to adapter. (Do not overtighten.) 3) Adjust tripod until Optic is vertical (refer to bubble level on top of Optic). 4) Turn Power on. 5) Turn Mode Dial to "Av" (Aperture Priority) 6) First time setup: ---Press "MENU". Set "MF-Point Zoom" to "On". Press "MENU" again. ---Press "FUNC". Then use Omni Selector to set ISO to "100", Quality to "Superfine", and Image Size to "L" (G3=2272x1704, G5=2592x1944, G6=3072x2304). Press "FUNC" again. 7) Rotate Main Dial to set Aperture (F-number on bottom of screen) to F8.0. 8) Press MF-Manual Focus Switch, and rotate Main dial until the focus bar is aligned to the top edge of the bottom line of the digit "2" in "20cm":
A note about Aperture, Depth of Field, and Field of View
Aperture- a mechanism behind the camera lens similar to the iris of your eye, opening and closing to adjust the amount of light entering the camera. The aperture opening also determines the Depth of Field of the image. Depth of Field- describes the objects in the image which are in focus, in terms of their distance from the camera. For example, a camera focused at 30m, with a Depth of Field of 8m, will have objects from 26-34m from the camera in focus. Objects closer than 26m or further than 34m will start to become blurry. Field of View- the vertical Field of View (vFOV) of the 0-360 Panoramic Optic. The 0-360 has a vFOV of 115 degrees, meaning it will see from 52.5+ above the horizon to 62.5+ below the horizon. A smaller Aperture opening (higher F-Stop number) allows less light to enter the camera, but yields a higher Depth of Field. With a high F-Stop, the shutter speed needs to be slowed down to allow more light (else a dark photo), but will have more Depth of Field in focus. A larger Aperture opening (lower F-Stop number) allows more light to enter the camera, but a lower Depth of Field. This means the shutter speed can be faster, but fewer objects will be in focus. (With slower shutter speeds, moving objects may blur.) The 0-360 is designed to operate with a camera F-Stop of F8.0 or higher. This provides a high enough Depth of Field to allow the entire mirror to be in focus. With lower F-stops, the shutter speed can be increased, but the upper or lower portions (or both) of the mirror may not be entirely in focus. This means the image far above or far below the horizon may not be sharply focused. This may not be a problem, as many times the sky or the ground may not need to be sharply focused. With the Canon PowerShot G3, G5, or G6, you should be able to get a vFOV of over 110 degrees, with good focus across the entire image. For best results, shoot a well-lit scene! With high F-Stops, you need good lighting, or longer exposure times.

Not Zoomed in enough! Proper Zoom Zoomed in too far!
9) Adjust Zoom until image of mirror just fills frame from top to bottom:
(NOTE: Depending on your camera's threads, the image may be slightly off-center. This is normal. A trick is to use a thin piece of paper or tape as a shim in the adapter gap to align to center.)
10) Press Flash Button to turn flash off. (A

will appear on screen)

10 will appear on the screen)
11) Press Timer Button on top of camera to turn timer on. (A 12) Press the shutter release. You have 10 seconds to hide!
13) Review the image. Zoom in to see that both the center and outside of the mirror are in focus. If not, adjust the Manual Focus and/or Aperture to obtain uniform focus. 14) Once you get the proper settings, press "MENU", and select "Save Settings". This stores all of the settings in either 'C1' or 'C2'. Then, whenever shooting virtual tours, simply set the Mode Dial to 'C1' or 'C2', and the camera will be ready to shoot! A nice feature! 15) Advanced Users: Turn 'Bracketing' on to take multiple images at different exposures at the same time. You can composite these images later, or use a 3rd party HDR software package to increase the image's dynamic range.
'Donut' doesn't fill frame

'Donut' fills frame

Donut runs off frame
Thank you for purchasing the 0-360 Panoramic Optic! With proper care and handling, the Optic should give you years of service. Here are a few important handling instructions: 1) Do not touch, handle, or polish the mirror! While the mirror does have a protective coating, touching or rubbing on its surface can cause scratches. Use the dust blower provided to remove dust before shooting. Use lens cleaning paper or lens cloth only if absolutely necessary, and rub gently. NEVER use a paper towel or other material to clean. 2) Avoid dropping or mishandling the unit, as it is a sensitive glass optical device. 3) Store the unit in its carrying case when not in use, in an upright position and in a cool, dry environment. 4) Use care in threading the Optic into your camera, avoiding cross-threading.
The 0-360 Panoramic Optic is warranted against defects in material and workmanship for a period of one year from date of purchase. This warranty does not cover damage caused by accident, abuse, misuse, exposure to the elements, or scratches to the mirror surface. If a defect in workmanship or material is discovered, 0-360.com will, at its option, repair or replace the Optic free of charge. Purchaser must first obtain a Return Authorization from 0-360.com, and return the unit properly packaged and freight prepaid. 0-360.com's liability is limited to repair or replacement of the Optic only. This warranty supersedes all other warranties, express or implied.
div. of Bellissimo, Inc. 2483 Simons Ct. Carson City, NV 89703 sales@0-360.com

IMPORTANT! Care Instructions WARRANTY ENJOY!
Please read the Care Instructions on back page.
Instructions for use with Canon PowerShot G3/G5/G6

Quick Start Guide

IMPORTANT!