Modern Classic SLRs Series : Canon T90 - Full Specifications
Type: 35mm single lens reflex (SLR) camera with electronically controlled automatic exposure (AE), focal plane shutter and built in motor drive. Format: 24 x 36mm;
Usable lenses: Canon FD lenses (full aperture metering and stopped down metering) and non FD lenses (stopped down metering); Standard Lens: FD 50mm fl1.4 Lens Mount: Canon FD Mount Viewfinder: Fixed eye level pentaprism. Gives 94% vertical and horizontal coverage of actual picture area, and 0.77X magnification at infinity with a standard 50mm iens. Dioptric Adjustment: Built-in eyepiece is adjusted to standard -1 diopter (eyepoint: 19.3mm); Focusing Screen: Standard split image / microprism rangefinder. Seven other types of interchangeable screens are available optionally. Mirror: Ouick return half-mirror with shock and noise absorber. Viewfinder Informatlon: Displayed at the right and bottom of viewing area.

Bottom area:

A: 7 segment LED digital display
1. Shutter speed flashes (red) at 4 Hz give out-of-metering-range warning light. 2. Aperture flashes (red) - at 4 Hz give out-of-metering-range warning light. 3. All hyphens (red) - data imprint confirmation; displayed only when special accessories are attached.
B: 7 segment LED character display
1. EEEE EE (red) error warning; displayed when the lens is set to "A" during stopped down operation. 2 HELP (red) - camera malfunction or operational error warning.

C: 3 segment LED display

1 * (red) - AE Lock indicator in partial area metering and spot area metering.
D: LED mask lighting display
1 M (red) - manual indicator. 2 (green) flash charge completion indicator. 3 +/- (red) - exposure compensation indicator.

Right hand side:

Dot and 7 segment digital transparent LCD display.
1 (white on blue background) - multi-spots metering indicator, H/S control indicator, and remaining frame display. 2 (White on blue background) FE Lock indicator when the Speedlite 300TL is used with the camera in the FE lock mode.
Light Metering System: Through-the lens (TTL) full aperture metering for FD lenses, using silicon photocell (SPD). Three selectable metering patterns: Center-weighted average metering, partial area metering, and spot area metering. When using lenses or accessories without FD signal pins, only stopped down metering may be used. Exposure Modes: 1. Shutter priority AE with selectable Safety Shift function (ON/OFF possible) 2. Aperture priority AE with selectable Safety Shift function (ON/OFF possible)
3. Standard program AE 4. Variabie shift program AE (selectable out of 7 programs) 5. Manual 6. Stopped down AE 7. Stopped down (fixed index) metering 8. Flash AE (possibie with specified Canon Speedlites) Meter Coupilng Range: EV 0-20 (with ISO 100 film and a 50 mm f1.4 lens) Film Speed: ISO 6- 6400. (ISO25-5000 is automaticaly set by 1/3 step according to DX code standard). Also can be set manually. Exposure Compensatlon: a. Exposure compensation index: +/- 2 steps by 1/3 increment. b. H/S control: +/- 4 steps by 1/2 increment (can only be used during spot metering, and in the FE iock mode with the Speedlite 300TL) Shutter Vertical travel metal focal plane shutter: All speeds electronically controlled. Front and back curtains controlled by separate quick-return permanent magnets. Shutter Speeds: 1/4000 - 30 sec. and bulb. (X-sync = 1/250 sec.) Can also be set in 1/2 step. Self-Timer Electronically controlled, with a delay of either approx. 10 sec. or approx. 2 sec. Indicated by blinking red LED operation confirmation indicator. Film Loading: Automatic. After the film has been positioned and the back cover closed,the film is automatically advanced to the 1st usable frame and then automatically stopped. (approx. 2 sec.). The frame counter displayed then read "1". Film Winding: Automatic. A built in coreless motor is used exclusively for film transport. Continuous shooting is possible. Confirmation by the film transport bar marks on the LCD display panel. Film Winding Mode: Three selectable modes, S (single exposure), H (max. 4.5 fps), and L (max. 2 fps). When operating in H mode, automatically switches to L mode when battery power drops below prescribed voltage to extend shooting capacity. Film Rewind: Automatic. A built in coreless motor is used exclusively for film rewind. Automatically starts when the end of the film is reached and then automatically stops (approx. 8 ssc. with 24 exp. film). Manual film rewind is also possible by pressing the manual rewind button. Flash Contact: Coupled directly to the camera by means of the X-sync contact on the accessory shoe. When using the Speedlite 300TL either first shutter curtain synchconizatbn or second shutter curain synchronization can be set. Automatic Flash: (When the Speedlite 300TL is used and the camera is set to a program AE mode): 1. A-TTL flash-auto: Using A-TTL program and the near infrared pre-flash of the Speedlite, the correct aperture value is automatically set according to the shooting distance and subject reflectivity. X-sync speed is also automatically set between 1/60 -1/250 sec. upon flash charge completion. TTL control system which meters the light reflected from the film surface. Automatic fill in flash is possible. 2. FE lock TTL flash-auto: The camera's FE lock program automatkally sets the aperture. The main flash tube produces pre-flash and the reflection from the subject is measured by TTL spot metering and is entered into memory. X-sync speed is also automatically set between 1/60 -1/250 sec. upon flash - charge

completion. Automatic fill flash is possible. Remote Control: Possibie. With three terminal contact for remote control. Remote Switch 60T3 is required. Muitiple Exposure: By pressing both the shooting mode selector and the metering mode selector at the same time. Continuous multiple exposure is possible. Reset clear during shooting and preset up to 9 exposures are also possible. Automatically cleared upon completion of preset exposures. Eyepiece Shutter Provided. Exposure Preview Button: All LCD / LED displays can be turned ON or OFF. LCD display to the right of the viewfinder and the display panel can be illuminated by the built in illuminatbn lamp. LCD Panel: Displays only the information required at the time, e.g. shooting mode, metering mode, film winding mode, shutter speed, aperture, film speed, frame counter (additive type), Self timer operation time, bulb operation time, battery check, etc. Power Source:. a. Main power source - four AA-size batteries. Alkaline manganese batteries are standard but carbon-zinc and NiCd batteries may also be used. 2 Memory back-up - built in Iithium battery (BR-1225 or CR-1220), batteries life is approx. 5 years Battery Check: By pressing the banery check button. Three energy levels are shown by the battery check bar marks on the display panel. Back Cover: Removabie. Opened by sliding the latch with safety lock. Command Back 90 and Data Memory Back 90 can be attached. Dimenslons: 1 53.1(W) x 1 21(H) x 69.4 (D)mm (6 1/4" x 4 3/4" x 2 3/4") Weight: 800g (28 3/16oz) body only. Speedlite 300TL Type: Energy-saving, automatic electronic flash unit with pre-flash function. TTL metering function measuring light reflected from the film surface, and an automatic flash output control function using spot metering. Exclusive use for the T90 camera. Clip on type with directly coupled contacts. Gulde Number:
The above figures are at full charge. i.e. 30 sec. after pilot lamp grows with new alkaline or fully charged Ni Cd batteries.
Flash Coverage Angle: Covers more than the field of view of 24mm, 35mm, 50mm and 85mm lenses. Recycling time: Alkaline manganese batteries: Auto: approx. 0.2 to 13 sec. M Hi: approx. 13 sec. Ni-Cd batteries: Auto: approx. 0.2 to 6 sec. M Hi: approx. 6 sec. (Interval between firing of the flash and relighting of pilot lamp with new alkaline or fully charged Ni-Cd batteries.) Number of flashes: Alkaline manganese batteries: approx. 100 - 700 times. NI-Cd batteries: approx. 45 - 300 times. (Counted when flash is fired in 30 sec.intervals with new alkaline or fully charged NI-Cd batteries.) Flash duration: Approx. 1/700 - 1/20000 sec Flash Control System: TTL series control system with pre-flash function. Automatic flash operation in A-TTL and FE-Lock modes. For Both the A-TTL and FE-L Modes:

Flash exposure Level Control: A maximum of 1.5 BV steps in the A-TTL or FE-L mode when subject illuminance is more than BV5 according to the center-weighted average metering system of the T90. Automatic Shooting Distance Range: (in Zoom head): at 24mm: 0.5 - 12.5m (1.6 - 41 ft.) at 35mm: 0.5 - 15m (1.6 - 49 ft.) at 50mm: 0.5 - 17.5m (1.6 - 57.4 ft.) at 85mm: 0.5 - 20m (1.6 - 65 ft.) Fllm speed setting: Automatically set by the camera Bounce angle: Upward: 0 - 90 (click stop positions: 0, 60, 75, 90) Left side: 0 -180 click stop positions: 0, 60, 75, 90,120,150,180) Right side: 0 - 90 click stop positions: 0, 60, 75, 90) PowerSource: Four size - AA (LR6) alkaline - manganese or NICd batteries. SE (SaveEnergy) mechanism: Power is automatically turned off after 5 minutes of non-use when the main switch is left on. Pilot Lamp: Lights when the flash is ready for use and automatically swrtches to flash photography. Also used as a test button. Size: 81(W) x 119.4 (H) x 94 (D)mm.(3 3/16 x 4 11/16 x 3 11/16") Welght: 395g (13 15/16 oz)
| Back to T90 Main Index Page |