Panel Meters and Controllers Controller for Pulse Signals Type MDI 40 TF
4-dgt multi-range P-based controller 2 independent measuring channels For rate, speed, frequency and period measurements Ranges from 0.001Hz to 50kHz/20s to 1000s Programmable time base from 0.1 to 999.9s Programmable pre-scaler from 9999 x 109 to 9999 x 109 Special calculation functions NPN, PNP, NAMUR, TTL, Pick-up, free of voltage contacts and AC signal inputs 2 independent alarm setpoints Alarm for over-range, up-alarm, down-alarm, down alarm with disabling at power-on, up/down-alarm with latch Degree of protection: IP 65 Optional analogue output (20 mA/10 VDC) Optional serial RS 485 output MODBUS, JBUS protocol.

Product Description

4-dgt multi-range P-based controller for rate, speed, frequency and period measurements. Scaling and setpoints are fully programmable by userfriendly key-pad. The MDI 40 TF includes peak/ valley function and password protection. The housing is easy to mount and ensures a degree of protection of IP 65.

Ordering Key

Model Measurement Power supply Setpoints Signal Output Engineering unit Option

MDI40TF1D2A XX IX

Type Selection
Measurements TF1: 0.001 Hz to 500 Hz 0.1 Hz to 50 kHz for DC signals: PNP, NPN NAMUR, TTL, free of voltage contacts, voltages up to 30 VDC 0.001 Hz to 500 Hz 0.1 Hz to 50 kHz for AC signals: pick-up, voltages up to 500 VAC Power supply A: B: C: D: E: F: 3: 6:
Signal output X: A: R: S: W: Y: None Analogue: from 0 to 20 mA /from 0 to 10 V Serial: RS 485 unidirectional Serial: RS 485 bidirectional Analogue (A) + serial (R) Analogue (A) + serial (S)
Options IX: XT: Degree of protection IP 65 (standard) Tropicalization + IP 65

On request

24 VAC, -15% +10%, 50/60 Hz 48 VAC, -15% +10%, 50/60 Hz 115 VAC, -15% +10%, 50/60 Hz 230 VAC, -15% +10%, 50/60 Hz (standard) 120 VAC, -15% +10%, 50/60 Hz 240 VAC, -15% +10%, 50/60 Hz 9 to 32 VDC with galvanic insulation 40 to 150 VDC with galvanic insulation

1) 1) 1) 1) 1) 1) 1)

Input Specifications
Number of inputs Rated input Frequency 2 independent measuring channels 0.001 Hz to 500 Hz (ON signal min. time duration: 500 s) 0.1 Hz to 50 kHz (ON signal min. time duration: 9 s) 20 s to 10 s (ON signal min. time duration: 9 s) 2 ms to 1000 s (ON signal min. time duration: 500 s) 0.001% rdg 3 dgt Temperature drift Time base Response time Display Max. and min. indication DC AC Type of input NPN (DC) 100 ppm/C Programmable from 0.1 to 999.9 s Time base + 200 ms 7-segment LED, h: 14.2 mm Max. 9999 min. -1999 Max. 9999 min. 0 Signal level: ON < 2 VDC, OFF open collector (current leakage 1 mA) Signal level: ON > 10 VDC, OFF open collector (current leakage 1 mA)

Period

Accuracy (@ 18 to 23C) Frequency measurement

PNP (DC)

Specifications are subject to change without notice (29.10.99)
Gross Automation (877) 268-3700 www.carlogavazzisales.com sales@grossautomation.com

MDI 40 TF

Input Specifications (cont.)
NAMUR (DC) TTL (DC) Free of voltage Contact (DC) Pick-up (AC) Voltage (AC) Signal level: ON 1 mADC, OFF 2.2 mADC Signal level: ON > 4 VDC, OFF 2 VDC Input load: ON < 1 k, OFF > 20 k Signal level: ON > 2 VAC, OFF < 1 VAC Up to 100 VAC, signal level: ON > 2 VAC, OFF < 1 VAC Up to 500 VAC, signal level: ON > 9 VAC, OFF < 6 VAC Available on the back screw terminal One input selectable as: display HOLD command or key-pad disabling Activation time Key-pad Programmable from 20 ms to 255 ms 4 keys: S for menu selection; UP and DOWN for value programming/function selection; F for special functions.

Auxiliary commands

Output Specifications
Alarms Number of setpoints Alarm types 2 independent (standard) Over-range, up alarm, down alarm, down alarm with disabling at power-on, up alarm with latch, down alarm with latch 0 to 100% of the displayed range Programmable minimum and maximum values 0 to 100% of the displayed range 0 to 255 s 0 to 255 s Normally energized/de-energized 2 x SPST 5 A, 250 VAC/VDC, 40 W / 1200 VA, 130.000 cycles 400 ms, filter excluded, setpoint on-time delay: 0 See the relevant table 15 VDC non-stabilized/40 mA max. (60 mA @ 12 VDC) 100 V output to measuring input 4000 V output to AC supply input 500 V output to DC supply input

rms rms rms

Accuracy Response time (@ 25C) Temperature drift Load: 20 mA output 10 V output Insulation Serial output Type Multidrop Connections
Setpoint adjustment Limits of setpoint adjustment Hysteresis On-time delay Off-time delay Relay status Output type Contact Rating Min. response time Insulation Excitation output Voltage Insulation
to 20 mA/ from 0 to 10 V 0.3% f.s. 500 ms 200 ppm/C 500 10 k By means of optocouplers, see the relevant table RS 485 Unidirectional (std), bidirectional (on request) 2 or 4 wires, max. distance 1200 m, termination and/or line biasing directly on the instrument 255, selectable by key-pad/ MODBUS, JBUS Measurement, data hold of minimum value, data hold of maximum value, alarm status All programming data Measurement, data hold of minimum value, data hold of maximum value, alarm status All programming data, min./ max. data hold reset, reset of alarm set-points with latch 1-start bit, 8-data bit, no parity, 1 stop bit 1200, 2400, 4800 and 9600 bauds selectable By means of optocouplers, see the relevant table
Addresses/protocol Data (unidirectional) Dynamic (reading only) Static (reading only) Data (bidirectional, on request) Dynamic (reading only) Static (reading/writing) Data format Baud-rate Insulation
Analogue output Range Scaling factor
0 to 20 mADC, 0 to 10 VDC Programmable within the whole range of the signal output; it allows the management of all values from 0

Software Functions

Scaling parameters Pulses per revolution Prescaler Programmable and independent per channel from 1 to 9999 Programmable and independent per channel from 9999 x10-9 to 9999 x109 Channel A: Fa*PS1 Pu1 Channel B: Fb*PS2 Pu2 Where: Fa and Fb are the frequency signals Pu1 and Pu2 are the pulses per revolution PS1 and PS2 are the prescalers Rate-meter Tacho-meter Frequency-meter Period-meter A 1/A A-B,(A-B)*100; [(A-B)/B]*100 A/B, A/B*100; [B/(A+B)]*100 A with rotation sensing on channel B (max. 10kHz, duty-cycle 50%) Automatic storage (RAM only) of the min. and max. value measured from the last reset Numeric code of max. 3 digits; 3 protection levels of the programming data 1st level 2nd level 3rd level Password 0, no protection. Password from 1 to 127, all data are protected Password for 128 to 255, all data protected except for the setpoints 0.001 to 500Hz 0.1Hz to 50kHz The position of the decimal point can be selected according to the needed read-out. The low and high limits of the scale are programmable and may be connected to the over-range alarms and, if available, to the part of the scale that has to be retransmitted by means of an analogue output. Programmable within the displaying range Programmable within the whole displaying range The display flashes when the limits of the displayed range are exceeded, the data are updated up to the maximum read-out EEE (AC) - EE (DC) From 0 to 9999 From 1 to 255

Range selection Display parameters Operating mode
Management of the input signals

Operating mode

Single channel Dual channel
Decimal point position Displayed scale Diagnostics

Peak and valley values

Password
Over range Under range Filter Filter operating range Filtering coefficient

Supply Specifications

AC supply 230 VAC, -15%+10%, 50/60 Hz (standard) 24 VAC, 48 VAC, 115 VAC, 120 VAC, 240 VAC, -15%+10%, 50/60 Hz (on request) See the relevant table 9 to 32 VDC, galvanic insulation, max. inrush current: 1.2 A/200 ms (on request) 40 to 150 VDC, galvanic insulation, max. inrush current: 0.8 A/200 ms (on request) see the relevant table 5 VA (basic instrument), 8 VA max. with signal output

General Specifications

Operating temperature Storage temperature Insulation reference voltage Dielectric strength EMC 0 to 50C (32 to 122F) (R.H. < 90% non-condensing) -10 to 60C (14 to 140F) (R.H. < 90% non-condensing) 300 V to ground, cat. III 4000 V for 1 minute IEC 801-2, IEC 801-3, IEC 801-4 (level 3), EN 50 081-1, EN 50 082-1 EN 61010-1, IEC 1010-1, VDE 0411 Screw-type, detachable

rms rms

Insulation DC supply
Safety standards Connector Housing Dimensions Material Degree of protection Weight CE-marking
Insulation Power consumption
1/8 DIN, 48 x 96 x 124 mm ABS, self-extinguishing: UL 94 V-0 IP 65 (standard) Approx. 520 g (Signal output and packing included) Yes

Insulation Table

AC Supply Input RL1 output RL2 output Analogue output DC Supply RS-485 AC Supply --4KV 4KV 4KV 4KV --4kV Meas. Input 4KV --2KV 2KV 500V 2kV 500V RL1 output 4KV 2KV --2KV 2KV 2kV 2kV RL2 ouput 4KV 2KV 2KV --2KV 2kV 2kV Anal. output 4KV 500V 2KV 2KV --2kV 500V DC Supply --2kV 2kV 2kV 2kV --2kV RS-485 4kV 500V 2kV 2kV 500V 2kV ---

Dimensions

Terminal Board
(TF1) NPN/PNP/NAMUR (DC type) input connections
(TF2) PICK-UP (AC type) input connections

Front Panel Description

2 F - Special function key to exit from the programming procedure and for alarm latch reset (those selected with latch function) 2. Display 4-digit (maximum read-out 9999). Alphanumeric indication by means of 7-segment display for: - Displaying of the measured value, over-range and programming indications. - Indication of programming parameters. 4 3. LED - 1 and 2 LED indicators for alarm conditions 4. Engineering unit Screen for interchangeable unit label available on the set of engineering unit labels supplied with the MDI (engineering unit label to be inserted by customer).
1. Key-pad Set-up and programming procedures are easily controlled by the 4 pushbuttons. S - Selection key to select programming function (instrument configuration) or measurement and alarm detection. and - Up and down keys for increasing or decreasing programming values. - Selecting programming functions and instrument configuration together with the S key.
RPS min mm/s cm3 mm3 m3/s
RPM h cm/s m3 kg/m3 m3/min
RPH Hz m/s km/h g/cm3 m3/h
MPH kHz mm/min m/h l/s t/h
ms % cm/min cm/h l/min kg
sec rad m/min mm/h l/h % speed

Overview2004CA.qk

12/16/04

11:29 AM

Page 1
Gross Automation (877) 268-3700 www.carlogavazzisales.com sales@grossautomation.com

Page 2

CARLO GAVAZZI A Global Force In
Offering the Complete Package
CARLO GAVAZZI offers a vast array of high quality products, which provide you the optimum solutions to your various automation tasks and applications. Our comprehensive range of products is shown on the adjacent page, with the respective page number for an overview on the products. For complete data sheets and pricing simply visit www.GavazziOnline.com, click on Online Datasheets and enter the part number prefix shown in this brochure. Information is TRULY available at your fingertips. More features of our website can be found on page 22.
Application and Market Knowledge
Our multitude of products are the result of years of intensive research and development. Our Engineering, Marketing and Sales Departments give assurance that all of our products are designed with the key features which the market requires for demanding applications.
Thanks to revolutionary technology from CARLO GAVAZZI, TRIPLESHIELD capacitive sensors are protected against disturbances caused by high levels of electrostatic discharge and surges, and also against noise from inverters, mobile phones, wire conducted noise, and contactor noise.
With the addition of our new manufacturing facility dedicated to researching, developing and manufacturing machinery safeguarding products, CARLO GAVAZZI has now expanded into providing safety solutions: Safety Light Curtains, Safety Control Modules, Safety Magnetic Switches, Safety Interlock Switches and Safety Mat Systems.
User friendly Solid State Relays with integrated heatsinks in standard and special versions for loads up to 90 amps. Low Noise types for meeting Emission Standard 50081. Integrated System Monitoring allowing permanent supervision of critical loads. Analog Full Cycle Control reducing stress of heating elements. Phase Angle Control for switching in accordance to the applied control current.
Current, Voltage and Phase Monitoring Relays for Mains Quality Inspection, Phase Sequence Monitoring, Load Guard. Current and Voltage Transformers. Smart Compact Transducers and Windows-Software-based Power and Energy Analyzers.
2 Gross Automation, 1725 South Johnson268-3700 www.carlogavazzisales.com sales@grossautomation.com Gross Automation (877) Road, New Berlin, WI 53146 PH: 262-446-0000, FAX: 262-446-0300, www.carlogavazzisales.com

Page 3

Industrial Automation
Inductive Proximity Sensors Capacitive Proximity Sensors Photoelectric Sensors Magnetic Sensors Ultrasonic Sensors Conductive and Float Level Sensors Limit Switches Solid State Relays and Heatsinks Motor Controllers Electromechanical Relays Contactors and Overloads Pushbuttons, Switches and Pilot Devices Cam Switches and Rotary Disconnects PLCs, Operator Interfaces and Counters Timers and Monitoring Controls Digital Panel Meters and PID Controllers Energy Management Enclosures, Cabinets and Consoles Safety Products Dupline Field and Installationbus 4-6 6-- - 16 - - 24 - - - - - - 35

Page 4

Inductive Proximity Sensors
Sensing Distance 1 mm 2 mm 3.5 mm 4 mm NAMUR 5 mm 6 mm 8 mm 10 mm 15 mm 40 mm 4 mm 2 wire DC extended 8 mm 14 mm 15 mm 22 mm 0.8 mm 1 mm 1.5 mm 2 mm 2.5 mm 3 wire DC 4 mm IA06BSN20xx IA06BSN20xxM5 IA08BxN25xx IA08BxN25xxM5 EI1204xP IA12DSN04xO IA12ASN04xOM1 EI1805xP IA18DSF05xO IA18ASF05xOM1 EI1808xP IA18DSN08xO IA18ASN08xOM1 EI0401xP IA05BSF10xx IA05BSF10xxM5 IA06BSF10xx IA06BSF10xxM5 IA08BxF15xx IA08BxF15xxMx EI1202xP IA12DSF02xO IA12ASF02xOM1 IA12DSF04Dx IA12ASF04DxM1
IA12DSN08Dx IA12ASN08DxM1
Housing Diameter, 4 mm M5 6.5 mm EI0601NA M8 EI0801NA EI0802NA M12 M18

Dimension

IA12xxF02U IA12xxN04U IA18xxF05U IA18xxN08U
IA18DSF08Dx IA18ASF08DxM1
IA18DSN14Dx IA18ASN14DxM1

IA30D IA30SA

IA30D IA30AS

5 mm 6 mm 8 mm

EI3 IA30 IA30AS
15 mm 40 mm 2 mm 3 wire DC extended 4 mm 8 mm 15 mm 22 mm IA08BSF20xx IA08BSF20xxM5
IA08BSN40xx IA08BSN40xxM1

EI3 IA30D IA30AS

IA12DSF04xx IA12ASF04xxM1 IA12DSN08x0 IA12ASN08x0M1 IA18DSF08x0 IA18ASF08x0M1
IA30 IA30AS Non flush mount Flush mount Flush and non flush
4 Gross Automation, 1725 South Johnson268-3700 www.carlogavazzisales.com sales@grossautomation.com Gross Automation (877) Road, New Berlin, WI 53146 PH: 262-446-0000, FAX: 262-446-0300, www.carlogavazzisales.com

Page 5

Diameter,
Dimension or Type M30 Flat Pack Fork Type Special Amplifiers
DU3.5 DU5 DU6 IA30xxF10U IA30xxN15U EI8040 DU10 SD110 SD210 SD270
All Inductive Sensors come with a 10 year Warranty

08Dx 8DxM1

14Dx 4DxM1
IA30DSF15Dx IA30SASF15DxM1
IA30DSN22Dx IA30ASN22DxM1
IC08ANC15xx IC08ANC15xxM5 ID25CNC20xx ID25CNC20xxM5

IC17CNC04xx

5xP 05xO 5xOM1

ID25ANC05xx DU6E

8xP 08xO 8xOM1 EI3010xP IA30DSF10x0 IA30ASF10xOM1 EI3015xP IA30DSN15xO IA30ASN15xOM1 EI8040xP DU10E
F08x0 8x0M1 IA30DSF15x0 IA30ASF15x0M1 IA30DSN22x0 IA30ASN22x0M1
NAMUR, transistor, SCR, MOSFET and analog output types. Standard and extended sensing distances from 1 to 40mm. Housing diameters from 4 to 80mm. Choice of cylindrical, limit switch style, rectangular, slotted (U-shaped) and pancake style housings. Offered in stainless steel, nickel plated brass or thermoplastic construction. Available with PVC connection cable, nano or micro plug for connection to quick disconnect cables. All versions come with a standard 10 year warranty!

non flush

ED ON ONTINU AGE C NEXT P

Page 6

Inductive Proximity Sensors (continued)
Sensing Distance 4 wire DC 10 mm 15 mm 25 mm 2 mm 4 mm 2 wire AC 5 mm 8 mm 10 mm 15 mm AC/DC 25 mm 0.1 - 1.5 mm Analog current output 0.1 - 3.0 mm 0.1 - 6.0 mm 0.1 - 6.0 mm 0.5 - 10.0 mm 2 - 5 mm 3 - 8 mm

Analog voltage output

Non flush mount Flush mount Flush and non flush

Page 8

Photoelectric Sensors
Sensing Distance 100 mm 200 mm Diffuse Reflective 250 mm 100-400 mm 500 mm 150-600 mm 200-800 mm optional timer (T) 1000 mm 15-80 mm Background Suppression 50-150 mm 120 mm 500 mm RetroReflective
ER1830xP, PA18xLR30Tx PA18CSR30xx PA18CLR30Tx
Housing Diameter, 10 mm M12 32x12x20mm Mx 13.5 x 40 mm 20 x 30 x 10 mm M18 PA18CSD01xP PA18CLD01Tx PA18CSD02xP PA18CLD02Tx PD40CND25
EO1804xP PA18ALD04Tx PA18CSD04xP PA18CLD04Tx

Dimensi

20 mm

PD32CND

PD40CNB08

PD32CNB

10 m 1.5 m PD40CNP15
EP1820xP, PA18xLP20Tx PA18CSP20xx PA18CLP20Tx
Polarized Retro-Reflective
2m 2.5 m 3m 6m 4m 5m 5 m with separate amplifier 6m MOFx5/5-5/5-8 MHx05 MOFx5-M12-2 PD32CNT MOFx20-M14-2/ 12-5/12-8 PD40CNT40 PD32CNP

Through-Beam

10 m 15 m 12 m adjustable 15 m with adjustable amplifier 20 m adjustable optional timer (T) 20 m with separate amplifier 50 m with separate amplifier MOFx20/20-5/ 20-8 MOFx50 MOFx20-M12-2/ 12-5/12-8 MOFx50-M12-2 MOFx20-M14-2/ 12-5/12-8 MOFx50-M14-2

PA18CST10xx

MNFx15 MMFx15 ET1820xP

Fiber Optic

Fiber For plastic fibers For glass fibers PD40CNX12x EF1801xP EF1801TB
8 Gross Automation, 1725 South Johnson268-3700 www.carlogavazzisales.com sales@grossautomation.com Gross Automation (877) Road, New Berlin, WI 53146 PH: 262-446-0000, FAX: 262-446-0300, www.carlogavazzisales.com

Page 9

g Diameter,
Dimension or Type M30 Flat Pack 13 x 30 x 60 mm 18 x 36 x 63 mm 18 x 75 x 36 mm 18 x 75 x 36 mm 50 x 50 x 17 mm 25 x 65 x 81 mm Special Amplifiers

EO3002

ED5502xP
Transistor, SCR and relay output types. Sensing distances from 50mm to 50m. Housing diameters from 11 to 40mm. Choice of cylindrical, rectangular and pancake style housings. Available in nickel-plated brass, polycarbonate or Luran construction. Offered with PVC connection cable or micro plug for connection to quick disconnect cables. Diffuse reflective, retro-reflective, polarized retro-reflective and through beam sensing principles. Find out today why CARLO GAVAZZI is the world leader in supplying photoelectric sensors to the car wash industry - perhaps the harshest of sensing environments.
ED5506xP PMD8xx (T) PC50CND10BA PC50CND10RP PA15I PB15I

PC50CNB50BA

PC50CNR10BA PC50CNR10RP

PMR10xx (T)

EP5520xP
PA3P PB3P PC50CNP06BA PC50CNP06P ET5505xP S142x S143x PMP6xx (T)
MPFTR5-4 MPFTR5-M14-4 MPFTR5-D18-4

MPF1xxx MPF2xxx MPF3xxx

PC50CNT20 PC50CNT20R

PMT20xx (T)

S142x S143x S142x S143x S142x S143x

PD60CNX20x PD60CNV20x

Page 10

Photoelectric Sensors - Specialized
Housing Dimensions 32 x 12 x 20 mm Miniature with Teach-In Special Function Clear Object Detection Contrast Sensing Color Sensing Laser LD32 PD32Cnx PD32CNG PD60CNG PD60CNK 13 x 30 x 60 mm 125 x 61 x 26 mm
For applications that require specialized sensors, Carlo Gavazzi now offers photoelectric sensors that go beyond the capabilities of standard sensors. Whether it be detecting transparent objects and changes in contrast, to detecting specific colors and even sorting by multiple colors, Carlo Gavazzi now offers you the solution. A complete family of miniature sensors with full-size features is also available, including laser. The sensors are microprocessor based and can be programmed, or taught, by the user through a simple push button interface.

Magnetic Sensors

Housing Material Housing Size 6 mm 16 mm M8 Cylindrical M10 FM.A, FM.C, FMP, and FM.S FS.B.2/2MT FS IM ISY I.A, I.C, and I.S2 MM M.A, S.B, M.S.1, and MS.A.2 S.A, S.B, S.C, and S.S.2 SP.B.2 FS.A.2/S3 FS.S.2/S1 FS.A.2/S4 FS.S.2/S4 FM FSM.S.2/S2 FSM.A FSM.S.2 FSQ.A. Plastic FMMP FSLP FMM Brass Nickel-Plated Brass Stainless Steel

M12 M16 Mx 18.5 x 7mm

Slot Rectangular 10
45 x 37 x 10mm 75 x 50.7 x 40mm 7 x 27 x 11mm 8.3 x 37 x 16mm 21.2 x 11.5 x 79mm 24 x 25.5 x 85mm
Magnetic sensors in a variety of sizes, shapes, and materials, to solve the widest variety of applications. Sensors consist of a reed switch, and a magnet (ordered separately). Sensing distances depend upon the size and strength of the magnet.
Gross Automation, 1725 South Johnson268-3700 www.carlogavazzisales.com sales@grossautomation.com Gross Automation (877) Road, New Berlin, WI 53146 PH: 262-446-0000, FAX: 262-446-0300, www.carlogavazzisales.com

Page 11

Ultrasonic Sensors
Thru-Scan M- 600mm 200 - 1500mm Discrete 200 - 2000mm 300 - 2500mm 400 - 4000mm 100 - 600mm 200 - 1500mm 300 - 2500mm 150 - 1500mm 0-10VDC 250 - 2000mm 350 - 3500mm 200 - 2000mm 300 - 3500mm 100 - 600mm 200 - 1500mm 300 - 2500mm 4-20mA 150 - 1500mm 250 - 2000mm 350 - 3500mm 200 - 2000mm Separate Amplifier 800 - 8000mm Notes: 1 - Push button programmable 2 - Windows software programmable UA18CLD06AG UA18CLD15AG UA30CLD25AG UA30CLD15GKM72 UA30CLD20FGM72 UA30CLD35FGM72 UA30CLD20AGM1TI1 UC80CND80FSM1 UCEU80-1 UA30CLS25POM1 UC80CNS40NO UA18CLS06POM1 UA18CLS15POM1 M30 Pancake M18 UA18CLD06xO UA18CLD15xO UA30CLD20OM1TI1 UA30CLD25x0 Diffuse M30 Pancake
Ultrasonic sensors in popular M18 & M30 housings. Diffuse sensing mode for detecting presence or measuring levels. Thru-scan mode for detecting presence of object anywhere in a broad range. 4-20 mA and 0-10 VDC analog outputs, along with NPN/PNP discrete outputs. Push button programmable, and software programmable versions for easier setup and greater control of sensor functions. An extended range unit with external amplifier is available.

Page 16

Electromechanical PCB Relays

Current Rating 5A MZ

1 NO - 1 CO 12.5x29.4x25.2

6A EMH

1 CO 16.5x21.5x15

8A M15

1 NO - 1 CO 29x10x15

10 A MZ

12 A M25

1 CO 12.7x29x15.7

16 A M25

20 A CV20

1 CO - 1DM 12.3x15.7x14

M15 R1

1NO-1NC-1CO 12.5x29.4x25.2

1 CO 9.3x17.5x13.2

1 NO - 1 NC 13.8x27.8x25.2

M15 R2

1-Pole

1 CO 10.5x20.5x20.5

1 NO - 1 CO 10.5x20.5x15.3

1 NO 7.4x14.9x12.5

1 CO 15.4x19.2x14.8
2NO-2NC-2CO 12.5x29.4x25.2

2 CO 12.7x29x15.7

2 CO 9.3x17.5x13.2

2-Poles

2 NO - 2 CO 12.5x29.4x25.2

2 CO 22.5x23x20.4

2 CO 29x34x10.9
Electromechanical Power Relays

Current Rating 20 A CGQ

1 CO 27x32.2x20.1

30 A CGQ

1 NO 27x32.2x20.1
Relays with 1 or 2 poles, from 20 A up to 30 A, AC and DC coils, standard and high insulation between coil/contacts, PCB and fast-on terminals.

1 NO 12.5x29.4x25.2

1 NO 10.5x20.5x20.5

1 NO 10.5x20.5x15.3

2 NO 33.5x50.5x42
2 NO - 2 CO 34.5x52.3x30.4

NF 2-Poles

2 NO 33.5x68x36
2 NO - 2 CO 34.5x52.3x26.4

2 NO 33.5x50.5x36

16 Gross Automation, 1725 South Johnson268-3700 www.carlogavazzisales.com sales@grossautomation.com Gross Automation (877) Road, New Berlin, WI 53146 PH: 262-446-0000, FAX: 262-446-0300, www.carlogavazzisales.com

Page 17

30 A CV26

1 CO 12x12.9x9.9

60 A CV23-0*

1NO-1NC-1CO 13x16x18

CV23-1*

1NO-1NC-1CO 15x17.5x19.5

CV23-0 *

1DNO-1DNC-1DCO 13x16x18

This relay family consists of three main relay groups: Signal Relays from 1 contact up to 4 contacts, from 1 A up to 6 A, DC coils only. General Purpose from 1 contact up to 2 contacts, from 5 A up to 16 A, AC/DC coils and bistable, 4 KV/8 mm between coils/contacts. Automotive Relays from 1 contact up to 2 contacts, single contact from 10 A up to 60 A, double make contact from 2 x 5 A up to 2 x 40 A, DC coils only.
1DNO-1DNC-1DCO 15x17.5x19.5

2 CO 15.8x24.3x14

*The current range is from 10 A to 60 A. According to the contact type.

Industrial Electromechanical Relays
Current Rating 5A 1PDT RMI 2 10

2PDT 21.5 x 36 x 28

16 A RPY001

1PDT 21.5 x 36 x 28

RPY002 2PDT

2PDT 35.5 x 56 x 35.5

RPY003

3PDT 31.5 x 36 x 28

3PDT 35.5 x 56 x 35.5

RMI 4 5

4PDT 21.5 x 36 x 28

RPY004

4PDT 41.5 x 36 x 28
The industrial relays are available with four 5 amp changeover contacts, two, three or four 10 amp changeover contacts and one 16 amp changeover contact. They are manufactured with various external connections: soldering and PCB terminals, multi pin socketed type. Available with LEDs and push to test buttons and the most common AC or DC coil voltages.

Overview2004US.qk

11:23 AM

Page 18

Contactors and Overloads
Auxiliary Contacts 1NO & 1NC WIDTH SIZE THERMAL OVERLOAD NEMA SIZE 00 44mm CGT-68mm CGT-2 92mm CGT-100mm 120mm 138mm CGT-125 CGT-150 CGT-HP @ 480V 5 HP CGC-9 CGC-12 CGC-18 CGC-22 CGC-32 CGC-40 CGC-50 CGC-65 CGC-75 CGC-85 CGC-100 CGC-125 CGC-150 CGC-180 CGC-220 CGC-300 CGC-400 CGC-600 CGC-800 7.5 HP 10 HP 20 HP 25 HP 30 HP 40 HP 50 HP 60 HP 75 HP

2NO &

CGT-400

CGT-800

Mini Contactors
Auxiliary Contacts 1NO or 1NC WIDTH SIZE THERMAL OVERLOAD TERMINAL TYPE HP @ 480V 5 HP CGMS-6 SCREW CGMS-9 CGMS-12 CGMS-16 CGMF-6 FAST-ON CGMF-9 CGMF-12 CGMF-16 CGMC-6 CAGE CLAMP CGMC-96 CGMC-12 CGMC-16 CGMP-6 SOLDER PIN CGMP-9 CGMP-12 CGMP-16 7.5 HP 10 HP
Termination types Screw type (standard) Fast-on Cage Clamp Solder Pin

CGT-12M

18 Gross Automation, 1725 South Johnson268-3700 Berlin, WI 53146 PH: 262-446-0000, FAX: sales@grossautomation.com Gross Automation (877) Road, New www.carlogavazzisales.com 262-446-0300, www.carlogavazzisales.com

Page 19

s 2NO & 2NC

100 HP

125 HP

150 HP

200 HP

300 HP

400 HP

600 HP

19 RATING CLASSES IN ONLY 8 DIFFERENT SIZES
Simp le sli de o ut ca ssett e for
easy coil r eplac eme nt fo r

100A - 800 A ve rsion s

Full line of mini contactors (up to 16A) with optional terminal styles including screw, fast-on, cage clamp and solder pin. Standard contactors (up to 800A) in only 8 different frame sizes. Easy slide out cassette for coil changes (100A and higher). Thermal overloads and interlock kits available to build starters and reversing units. Enclosed starters also available with and without buttons. Unique electronic and digital motor protection relays for detecting overload conditions as well as phase loss, reversal protection, current imbalance, stalled motor and locked motor detection with alarm and trip output contacts and optional ground fault protection (100mA through 2.5A).
Enclosed Starters Interlocks Kits for Reversing Contactors Auxiliary Contacts in 1, 2 & 4 Poles
Digital Motor Protection Relays
Electronic Motor Protection Relays
Carlo Gavazzi GMS Series of Manual Motor Starters provide complete ranges up to 100A

Page 20

Pushbuttons, Switches and Pilot Devices
Through-hole Diameter 22mm Plastic Ring Rear Mount Non-Illuminated Flush Push Button IPR Illuminated IPRL 22mm Metal Ring Rear Mount Non-Illuminated PR Illuminated PRL 30mm Metal Ring Front Mount Non-Illuminated 30/PR Illuminated 30/PRL*
Extended Push Button Push-Pull Mushroom

with 35mm PB Head

30/PSL

IPFL Momentary Mushroom

PFL PFL

Momentary Mushroom

with 60mm PB Head
30/PF Turn to Release Mushroom

with 40mm PB Head

Turn to Release Mushroom
Mushroom with Key Release

Mushroom Turn to Release

with Safety Snap Lock 35mm PB Head

Signal

IS2 to IS6

S2 to S6

30/S2 to 30/S6

Short Handle Selector

30/SN1

Long Handle Selector

30/SNL1

Key Selector

30/SC1
ALSO AVAILABLE 22 and 30mm two and four position joysticks (TM and M Series) 22mm double or triple headed operators (IP Series) Single button and multi-button complete control stations (SC Series) Empty boxes with holes (SD, SM, SV Series) Pedal switches (PS and PC Series) 22mm metal version with rear screw mounting available on request (P/V Series) 22mm square bezel plastic with rear ring mounting available on request (QP Series) New Ersce brand Pushbuttons, Switches and Pilot Devices are available in 22 and 30mm diameter mounting sizes. A modular design comprised of operators (pushbuttons, E-stops, selectors, key locks), indicators, contact blocks & lamp sockets are all interchangeable, with the 22 and 30mm operators using the same contact blocks and lamp sockets. Up to four (or 6 on special request) independent contacts on one operator are possible with a combination of single and double, NO and NC contact blocks. Full range of extended and flush pushbuttons, 35-60mm E-stops and selectors, which are available in six colors and in illuminated versions. Other operators, enclosures and control stations are also offered.

*Also available with guard
20 Gross Automation, 1725 South Johnson268-3700 www.carlogavazzisales.com sales@grossautomation.com Gross Automation (877) Road, New Berlin, WI 53146 PH: 262-446-0000, FAX: 262-446-0300, www.carlogavazzisales.com

Page 21

Cam Switches and Rotary Disconnects
Current Rating 12A Rear Mount Cam Switches Base Mount 22mm Mount 2 Pole Rear Mount 2 Pole Base Mount 2 Pole 22mm Mount Disconnect Switches 3 Pole Rear Mount 3 Pole Base Mount 3 Pole 22mm Mount 4 Pole Rear Mount 4 Pole Base Mount 4 Pole 22mm Mount 2 Pole Rear Mount Disconnect Switches with Auxiliary Contacts and Poles 2 Pole Base Mount 2 Pole 22mm Mount 3 Pole Rear Mount 3 Pole Base Mount 3 Pole 22mm Mount 4 Pole Rear Mount 4 Pole Base Mount 4 Pole 22mm Mount 2 Pole Rear Mount Disconnect Switches with Auxiliary Contacts, Poles and Fuses 2 Pole Base Mount 2 Pole 22mm Mount 3 Pole Rear Mount 3 Pole Base Mount 3 Pole 22mm Mount 4 Pole Rear Mount 4 Pole Base Mount 4 Pole 22mm Mount XNA3G XNA4R XNA4B XNA4G XNF2R XNF2B XNF2G XNF3R XNF3B XNF3G XNF4R XNF4B XNF4G 16A 20A CNR. CNB. CNG. KNZR2 KNZB2 KNZG2 KNZG3 KNZB3 KNZG3 KNZR4 KNZB4 KNZG4 XNA2R XNA2B XNA2G XNA3R XNA3B 25A 32A 40A 50A 63A 80A 100A
Cam switches for up to 32A, positive opening double break contacts. Change over, motor control, ammeter, voltage, reversing starter, or just about any kind of switch imaginable is available (or can be made). Rotary disconnects for up to 100A with horsepower ratings. Auxiliary contacts and additional snap-on poles are available. They are also available with built-in fuses. Both the cam switches and rotary disconnects are available for base mounting, rear door mounting and 22mm hole mounting. Full series of knobs and plates available in locking and non-locking styles in black-gray and red-yellow color combinations and 48x48 and 67x67 mm sizes.

Page 22

Counters, Hour Meters and Tachometers
Specifications Model Counter Hour Meter Tachometer Input Contact, Transistor, Encoder, AC Voltage NPN, PNP, Contact Output(s) Supply Internal Battery or 120/220 VAC Internal Battery or 12-24 VDC 120 VAC, 220 VAC, or 12-24 VDC 90-264 AC, 20-50 V AC/DC Size (in mm) Display

36 x 72

8 Digit LCD

1 Transistor

24 x 48
6 Digit LED or 8 Digit LCD

NPN, PNP, Contact

1 Relay and 1 Transistor

48 x 48

6 Digit LED or 6 Digit LCD

NPN, PNP, or Contact

48 x 96

5 Digit LED

Contact NPN, PNP, Contact NPN, TTL, AC Voltage, Contact
None 1 Relay and 1 Transistor

9-85 VDC

53 mm or 24 x x 48
6 Digit LCD Dual 4 Digit LED

90-264 VAC

Internal Battery
Full line of digital counters with LED or LCD displays. Inputs include dry contact, AC voltage, and NPN or PNP transistor. Outputs include relay and transistor. Versions with AC or DC external power supply or internal lithium battery. Hour meters and tachometers are also available.
22 Gross Automation, 1725 South Johnson268-3700 www.carlogavazzisales.com sales@grossautomation.com Gross Automation (877) Road, New Berlin, WI 53146 PH: 262-446-0000, FAX: 262-446-0300, www.carlogavazzisales.com

11:30 AM

Page 23
PLC Description PLC (RS232 + RS485 ports) 10 I/O (6 Inputs / 4 Outputs) 14 I/O (8 Inputs / 6 Outputs) 20 I/O (12 Inputs / 8 Outputs) 30 I/O (18 Inputs / 12 Outputs) 40 I/O (24 Inputs / 16 Outputs) 60 I/O (36 Inputs / 24 Outputs) 3 Analogue (2 Inputs/1 Outputs) 4 Analogue Inputs 4 Analogue Outputs (current) 4 Analogue Outputs (voltage) 4 RTD Inputs DeviceNet Interface Profibus Interface LG Fieldbus Interface K7M-DR10UE K10S1-K14P1-DRS K7M-DR20U / KTM-DRT20U K7M-DR30U / K7M-DRT30U K7M-DR40U / K7M-DRT40U K7M-DR60U / K7M-DRT60U DR20A PLC (2 x RS232 + RS485) Expansion Module DR10A
Base I/O from 10-60 which can be expanded to 120 I/O. Analogue, RTD, fieldbus and RTC expansion modules. PLC has an extensive instruction set and large programme storage capability combined with fast scan times. 2 built-in high-speed counters and powerful communications capabilities.
G7F-ADHB G7F-AD2B G7F-DA2IA G7F-DA2V G7F-RD2A G7L-DBEA
Add the Universal Windows K-SOFTWARE, FREE with purchase of CPU, and youll have one of the most powerful and inexpensive families of PLCs on the market!

G7L-PBEA G7L-FUEA

Operator Interfaces
5.7 Monochrome Touch Screen 320 x 240 Resolution 24 VDC Supply 85-264 VAC Supply PMU-300BT 5.5 Colour Touch Screen 320 x 240 Resolution PMU-330TT 7.5 Colour Touch Screen 640 x 480 Resolution PMU-530TTS
KGL-WIN programming software can be downloaded FREE of charge from www.GavazziOnline.com.
10.2 Colour Touch Screen 640 x 480 Resolution PMU-730TTS/DC PMU-730TTS 12.1 Colour Touch Screen 800 x 600 Resolution PMU-830TT/DC PMU-830TT

23 Gross Automation, 1725 South Johnson268-3700 www.carlogavazzisales.com sales@grossautomation.com Gross Automation (877) Road, New Berlin, WI 53146 PH: 262-446-0000, FAX: 262-446-0300, www.carlogavazzisales.com

Page 24

Timers
Functions Delay on Operate D-Series DIN-rail Mini-D-Series DIN-rail P-Series Plug-in Housing S-Series Plug-in Scan Timer Plug-in 48 x 48 Plug-in E-Series DIN-rail Mini-E-Series DIN-rail EAS DAA01, DMB01 DAA51, DMB51 PAA01, PMB01 S111, S1221 A101, A108, A201, A208, A109 B866, B856, B506 Interval DMB01 DMB51 PMB01 SC210, SC215, S112, S1221 B101, B108, B201, B208, A109 B866, B856, B506 EBD EBS Delay on Release DMB01, DBB01, DBB02 DMB51, DBB51, DBA52 PMB01, PBB01, PBB02 S1221 B121, B128 B866, B856, B506 Recycler (Symmetrical) DMB01 DMB51 PMB01 S1321, S1331, S1341, S1342 C101, C208, C111, C218 B866, B856, B506 Recycler (Asymmetrical) DCB01 DCB51 PCB01

Monitoring Controls

Current DC and 1-phase AC D-Series DIN-rail Mini-D-Series DIN-rail Housing DIA01, DIB01,DIB02, DIC01, DUA01

DIA53, DIB71

8 and 11 pin plug-in time delay relays, as well as DIN rail mount types. Each multi-voltage timer offers various timing functions and ranges, which minimizes inventory and maximizes functionality. The PC programmable type offers great flexibility for creating special functions.Digital timers with LCD or LED Display.
Functions Current 3-phase AC DIB02, DIC01, DUA01 DIA53, DIB71 Voltage DC and 1-phase AC
DIC01, DUA01, DUB01, DUB02, DUC01
Voltage 3-phase AC DPA01, DPA02, DPB01, DPC01 DPA53, DPB71

Phase Sequence/Loss

DUA52, DPB71

DPA51, DPB71

Mini-E-Series Current Transformers P-Series Plug-in S-Series Plug-in Current Transformers Split Core Transformers Shunts
EIS, E82 PIA01, PIB01, PIB02, PIC01, PUA01 PIB02, PIC01, PUA01 PIC01, PUA01, PUB01, PUB02,PUC01 PPB01, PPC01 PPA01, PPA02

Accessories

A82, MI, TADK2 TAD2/3/4/6/8/12, TACO 110, TACO 200 SCT DER

A74, MP

Single phase monitoring relays for AC/DC current, AC/DC voltage, AC frequency and temperature. Three phase controls for monitoring phase loss, phase sequence, phase angle and phase asymmetry. Available in both 11 pin plug-in and DIN rail mount housings. Most monitors feature adjustable set point(s), time delay(s), hysteresis and latch functions, as well as separate output for under or over set point conditions. Current Transformers are available with analog output (up to 500AAC), adjustable set point with transistor output (up to 100AAC), as well as 5AAC secondary output (up to thousands of amps). DC shunts and transducers are also offered. SCT Series split-core CTs from 100 to 6,000 A

Modular Housing / Display
Resistance up to 20K Ohms
UDM 35 Series BU BD35 IC BQLSX UDM 40 Series BU BD40 IC BQLSX USC Series BU BDXX IC BQLSX
The EDM35, UDM35 and UDM40 Digital Panel Meters and USC Universal Signal Conditioner feature a modular design in which a power supply module and an input module is "plugged " into the back. of an indicator (base unit). Then optional output modules can be added: 1 or 2 relay outputs, 2 relay outputs and 2 transistor outputs, one analog output and/or excitation output.
Measurements 1 A DC 60mV/100 V DC 500 V DC DI3 Indicator DIN mounted, 3-DGT DI3 Indicator 72 x 72 mm, 3-DGT Housing / Display LDI3 Indicator 48 x 96 mm, 3-DGT LDI35, LDM35 Panel Meter 48 x 96 mm, 3.5-DGT 0/1/2 relay outputs MDI40, MDM0 Panel Meter 48 x 96 mm, 3.75-DGT Analog/RS485 outputs 2 relay outputs 5 A AC 500 V AC 1 A AC 100 V AC DI3-DIN.AV5 DI3-DIN.AV1 DI3-72.AV1 DI3-72.AV5 LDI3.AV5 LDI3.AV1 Up to 1000 Hz Autoranging Capability 200 mV DC 20/200 V DC 2/20 mA DC 200 V DC/AC 500 V DC/AC 2/5 A DC/AC Pt-100, Pt-1000 Ni100 TC:J, L, K, S, T, E 200 Ohm
DI3-DIN.AV6 DI3-72.AV6 LDI3.AV6
DI3-DIN.F1K DI3-72.F1K LDI3.F1K LDI35.AV0 LDM35 LDI35.AV2 LDM35 LDI35.CF LDM35

MDI40.CF

PID Controllers
Features Standard Controller 1/32 DIN Single Display 1/16 DIN Dual Display 1/8 DIN Dual Display 1/4 DIN Dual Display 3200 P1400 1460,1462, 1161, 1162, 1401 Ramp / Soak Controller Limit Controller

Housing / Display

PID controllers with programmable inputs and outputs. Available with heater break alarm, loop break alarm, ramp to setpoint, auto-tuning, self tuning, and RS485 communications. Ramp/soak controllers and high/low limit controllers. Housing sizes: 1/32 DIN : 24 x 48 mm 1/16 DIN : 48 x 48 mm 1/8 DIN : 48 x 96 mm 1/4 DIN : 96 x 96 mm
26 Gross Automation, 1725 South Johnson268-3700 www.carlogavazzisales.com sales@grossautomation.com Gross Automation (877) Road, New Berlin, WI 53146 PH: 262-446-0000, FAX: 262-446-0300, www.carlogavazzisales.com

Page 27

les RPM up to 200K EDM 35 Series BU 5100711 IC 5100540 Resistance 200K Ohms Max. EDM 35 Series BU 5100711 IC 5100535 Temperature TC: J, K or PT100 RTD EDM 35 Series BU 5100711 IC 5100537(J), 5100538 (K) or 5100536 (PT100)

*Also available in stainless steel Wall mount enclosures are manufactured from a single sheet of metal, and powder coated with a RAL7032 powder coated finish. They are offered with a gasketed locking door (SI & ST), with a locking door with a window (STP) or in stainless steel (STX). The boxes have an external edge with gutter profile preventing ingress of dust, and they carry a NEMA 1,12, 4 / IP55, IP65 environmental rating. The SDV (screw down cover), SDP (with door), SDF (with gland plate) and SDVX Series (with window door) are some of the junction boxes offered. They are offered in a wide range of sizes from 6 x 6 x 3" to 32 x 16 x 5" (H x W x D).
30 Gross Automation, 1725 South Johnson268-3700 www.carlogavazzisales.com sales@grossautomation.com Gross Automation (877) Road, New Berlin, WI 53146 PH: 262-446-0000, FAX: 262-446-0300, www.carlogavazzisales.com

Page 31

ARETA Modular Cabinets and Consoles
The revolutionary ARETA Series is a modular ready to assemble cabinet enclosure. You simply order an ATTF cabinet roof and floor, then the ATFI side panels, then the ATPO door and then the ATRE rear panel. Its as simple as that! Then theyre assembled in a matter of minutes. The ARETA cabinets are available with the various dimensions: 16, 20, 24 or 32" deep 16, 24, 32, 40, 48, 56 or 64" wide 56, 64, 72, 80 or 88" tall They can also be ganged together to get additional width using an ATKU joining kit.
The ARETA cabinets carry a NEMA12 / IP55 rating and are available with many other options, such as multiple doors, front window doors and inner panels. Although the cabinets are available standard with a rugged RAL7032 textured finish, they are also offered in stainless steel, as PC cabinets with 19" standard rack, with a folding keyboard support, and also as AL Series freestanding consoles in widths of 24, 32, 48 or 64". Also offered are the BASIC and ATB8 Monobloc Series, which are fully welded and assembled cabinets.
ZBA Series Freestanding Consoles
24, 32, 40 or 48" wide x 33" high x 16" deep with one or two front door(s).
PCCO and PCIN Series PC Stands:
For mounting a PC, complete with CPU.
SBA Series Freestanding Consoles
24, 32, 40 or 48" wide x 33" high x 16" deep with one or two front and rear door(s).

Thermal Management

A wide range of products, such as: Ultra-thin conditioners, airwater heat exchangers, heaters, thermostats and hydrostats.
CR Double Hinged 19" Rack Enclosures
Double-hinged enclosure eases installation. All enclosures are 24" wide x 9, 14, 20, 25, 30, 35 or 40" high x 18 or 20" deep.

Page 32

G34205501

G21205501

FFD1532

G34396470

FAD1532

G34296470 G32101111 G32101112 G32101113 D34296192

FFD1533

FAD1533
Dupline-Online allows monitoring and control of any remote facility via the Internet.

G40855560 G41855530

I/O Indicator 4-Digit, 7-Segment
PLCs and Serial Interfaces
G38900014 G38900034 G349600

G219600

Profibus-DP Gateway DeviceNet Gateway LonWorks Gateway Interbus-S Gateway Modbus Gateway Centronic Interface Modem Interface Fibre Optic Interface
G38910020/21 G38910050 G38910051 G38910052 G38910053 G38900014 G38900034 G3800
Bi-directional transmission of analog and /or digital signals over a single twisted pair of wire. Extremely immune to electrical noise, up to a six mile distance in any number of topology system designs. Longer distances possible with the implementation of signal repeaters or modems. Communication interfaces include: DeviceNet, Profibus-Dp, LonWorks, Interbus-s, Modbus gateways, and directly mapped PLC gateways (for Mitsubishi, GE Fanuc, Siemens, Omron, LG, AB, Schneider, Koyo, Matsushita, Siemens, Toshiba, IDEC) modem interfaces (dial-up, leased line, cellular, RF and microwave). Over 100,000 installations worldwide, quickly approaching one million I/O nodes. System Accessories GAP1605 programmer, ADAPT1605 adaptor, GTU8 tester, DT01 terminator and D3892000 repeater.
FMK xxx RS232-9M/9F D9091SW

FMK xxx HF

RS485-CAB G34850000

D32124000

34 Gross Automation, 1725 South Johnson268-3700 www.carlogavazzisales.com sales@grossautomation.com Gross Automation (877) Road, New Berlin, WI 53146 PH: 262-446-0000, FAX: 262-446-0300, www.carlogavazzisales.com

Page 35

Output PCB Other DIN
Input/Output Socket PCB Other

Sensors

Counter input DIN Socket

Display

Interface

G88301143 GH34404412

G34404443
GH64404412 G81104406 G82104406 G85101101 G85102201 G85103301 G34485234 GXD1500 G21405510 G21404421 G21405520
FFD1680 SPEC0918 G44207401

G21305511 G21305521

G42484133

G86111010 G89111010

G61101145 G89101101 G89101101G G89101127 GTS565 GTD50 ETS377S G5460 D63696475 G21391139 D90910210 G34910090 G219600. G38900014 G38900034 G38910020/21 G38910050 G38910051 G38910052 G38910053
D90910210 G34910000 G34910090 8047-Bracket HF 8047-Bracket 1G89101101 1G89101101G HF SPEC0919 D9091SW D7191SW