Konformittserklrung

Hiermit erklren wir, dass die Massagesessel CMS-360 / CMS-361 / CMS-362 Kennedy III folgenden einschlgigen Bestimmungen entsprechen: EMC directive (2004/108/EC) Angewendete harmonierte europische Normen: EN 55014-1:2006 EN 55014-2:1997/+A1:2001 EN 61000-3-2:2006 EN 61000-3-3:1995+A1: 2001+A2: 2005 Akkreditierte Prfstelle: Timeway Testing Laboratory
Lagerung / Konformittserklrung
Paderborn: 01.07.2010 Casada Group GmbH Germany
Casada Group GmbH Obermeiers Feld Paderborn, Germany tel. (+49) (54) 98 - 0 fax (+49) (54) 98 - 30 Email: info@casada.com Internet: www.casada.com Copyright Bilder und Texte unterstehen dem Copyright von Casada Group GmbH und drfen ohne ausdrckliche Besttigung nicht weiterverwendet werden. Copyright (c) 2010 Casada Group GmbH. Alle Rechte vorbehalten.
Stellt sich bei berprfung des Produktes durch den Verkufer heraus, dass das Gewhrleistungsverlangen einen nicht von der Gewhrleistung erfassten Fehler betrifft oder dass die Gewhrleistungsfrist abgelaufen ist, sind die Kosten der berprfung und Reparatur vom Kunden zu tragen.

CONGRATULATIONS

With the purchase of this massage device you have shown awareness of your health. In order for you to enjoy the advantages of your massage device in the long term, we ask you to read and adhere to the instruction manual carefully.
Since being established in 2000, the name Casada stands for high quality products on the health-spa and fitness market. Today, Casada equipment is available in more than 40 countries world-wide. Constant further development, an unmistakeable design and a focused orientation towards a better quality of life are what characterize Casadaproducts, as much as their unbeatable and reliable quality.
We wish you a lot of fun with your personal Kennedy III.

ENGLISH

Table of contents
25The massage 26Safety instructions 27 Installation

The Massage

31Start up 31Technical data 32Equipment / functions 34Remote Control 38 Massage techniques
We are all familiar with the soothing relaxation of tense muscles by a massage. There are obvious explanations for these processes inside the muscles, blood vessels and nerve fibres. In the body, there are two circulatory systems. The bloodstream, starting from the heart, supplies nutrients to the brain, organs and muscular system, whilst the lymphatic system ensures that metabolic products, dross and toxins can be washed out of the body.

39Troubleshooting 39Care instructions 40Storage 40Conformity declaration

41Warranty conditions

Every massage also stimulates this system, causes the body fluids to move, and thereby promotes the evacuation of harmful substances and the supply of oxygen and nutrients.
Inhaltsverzeichnis The massage

table of contents

If the immune system is attacked by infections and viruses, the first thing the doctor does is to feel the lymph nodes, as these produce defence cells and react to this strain by swelling.

Safety Instructions

Before using this massage chair, please read the instructions carefully to ensure perfect function and optimal effect. Please retain this instruction manual in a safe place! The massage chair complies with the recognised principles of techno logy and the current security regulations. The equipment is maintenance free. Any incidental repairs may only be executed by an authorised expert. Inappropriate usage as well as unauthorised repairs are prohibited due to reasons of safety and will lead to the loss of warranty.

Installation

When positioning the chair, please leave 80cm of space behind the backrest to allow free reclining of the backrest. Unplug from outlet when installing the Chair parts. Please remove the protective cover of the arm rests only after the chair has been completely assembled in order to avoid scratches and damage. For installation you need a screwdriver.
For safety reasons, dont put your fingers inside the massage heads. Avoid touching the plug with wet hands. Please avoid the equipment coming in contact with water, high tempera tures as well as direct exposure to the sun. In case of a longer period of non-usage please unplug the equipment from the power supply to avoid risk of short circuit. Do not use damaged plugs, cables or loose sockets. If the plug or the cables are damaged, they have to be replaced by the manufacturer, the service representative or qualified personnel. In case of malfunction please immediately interrupt the connection with the power supply. Misappropriation or wrongful usage will void all liability for damages. Children should only use the massage chair under appropriate super vision.

Safet y Instruc tions

Never use pointy or sharp objects. Any massage also massage by hand has to be avoided during pregnancy and/or in case of one or more complaints in the area of the massage: recent injuries, thrombotic illnesses, inflammations and swelling of any kind as well as cancer. Consultation of your physician is recommended prior to any treatment of afflictions and ailments. If you depend on electrical aids such as a pace maker, please consult your physician prior to usage IN ANY CASE.

01 Neck pad 02 Back pad 03 Armrest Airbag 04 Remote Control 05 Calvesrest Airbag 09 Airbag Shoulder 06 Footrest Massage 10 Backrest 07 Seat pad 08 Wheel
Installation Inhaltsverzeichnis Die massage
In order to prevent excessive stress on muscles and nerves, the recom mended massage time of 30 minutes should not be exceeded.
01. install the side panels Attach the side parts at a 90 angle at the base part of the chair with the 4 screws supplied. Tighten the screws firmly.
04. connect the plugs Insert the plugs all the way into the corresponding place in the seat part according to the marks given.

02. Install the seat pad

05. unfold the backrest Unfold the backrest carefully until you hear it click into place.
Fasten the seat pad by the zippers at all 4 sides.
03. Install the backrest Lift the backrest, then lower it into the seat brackets, securely lock the flat head bolts into sides of the seat. (A).
06. Attach the bachrest pad and the pillow pad

(A) (B)

(B) Attach the connecting rod and the u stay fork of the reclining actuator with the flat head rivet and secure it with a split pin (B).
Installation Inhaltsverzeichnis
Attach the backrest pad with the zipper (A). Attach the pillow pad using the hook and loop fasteners (B).
07. Fix the remote control Fix the remote control to the holder by securing the screws.

Start up

Connect the cable Please check prior to usage that the mains voltage coincides with the voltage stated on the power plug. If not already done, please connect the power cable with the chair (A) and subsequently plug the power plug into the power socket. Now turn on the chair by switching the switch to I (B).
(A) Moving the chair Lift up the calves rest. Recline the chair to approxi- mately 45 degrees, so that you can easily move the chair

Technical Data

Avoid moving the chair when there is someone seated on it. Placing a mat underneath the massage chair is advisable, as the moving process might leave scratches on the floor surface. Back pad Back Massage Strength-Control Pad has been inserted into the Backrest Cover. If strong massage is desired, remove the Back Massage Strength-Control Pad from the cover, this is strengthens the massage. If milder massager is desired, insert the Back Massage Strength-Control Pad into the cover, this lessens the strength of the massage. Measure upright: Weight: Power source: Operating time manual: Operating time automatic: Certificates: 146 x 88 x117 cm 97 kg AC ~ 220-240 V, 50-60 Hz, 220 Watt 15 minutes 30 minutes

start up / Technical DATA

equipment / Functions

The operation of massage chair is controlled by a microcomputer that performs various intelligent massage methods and combinations, like Kneading, Tapping, Clapping, Shiatsu, Rolling, Vibration and Air Massage. All these methods massage acupressure points accurately to effectively alleviate fatigue, promote metabolism and improve blood circulation. The chair is equipped with five sets of full body automatic programs and three sets of localized automatic programs to thoroughly fulfill your various needs. Various types of massage functions can be combined for customized massaging programs, in addition to the precise point massage.
The massage chair has a special massage unit adjusted to the human spine. The massage rollers possess a locking mechanism, which enhances the effect of the acupressure massage. The individually designed back part of the massage chair is automatically adjustable between 115 and 160. Similarly, also the foot rest can be adjusted from 0 to 90. With the timer function you can optionally adjust the desired duration of the massage. The LCD display will light up in the dark and therefore provides you with the opportunity to activate different programs at any time. The massage function will switch off automatically after 15 minutes. In order to increase the lifespan of the motors, please switch on the massage heads again only after a minimum of 30 minutes have passed. This gives the motors time to cool down again. You should also allow a period of rest for your body. We recommend conducting the massages only two, maximum three times a day in order to not overstress your muscles. For your own safety we equip the machines with a protection against overheating. Heat is created in the motors when placed under great stress and excessive pressure. Before this could create any risk, the machines will switch off automatically and will only allow switching on again after an appropriate downtime between 30 and 60 minutes.

Equipment / Functions

Remote Control
Full body massage programs Partial massage programs With removable remote control
Backrest Scan This chair is equipped with a Scan function that the massage position can be adjusted according to the users height for a more effective massage. Every time the button is pressed, the chair will start to scan the users back and legs to detect the best massageposition. (Manual Backrest Up/Down Control Buttons /): For more comprehensive and comfortable massage, the user can further adjust the height of the massage by pressing this buttons after the Scanning program. The massage rollers will go upwards or downwards according to your request until the most suitable position is reached and you let go off the button. Notes: These manual Up/Down buttons can also be used in the Memorized Programs for the selection of different massage methods. Pause During the massage you may interrupt the program for a short period with the PAUSE button at any time. At the same time the timer will stop and the LCD display will blink. During this time the massage chair is idling and only the reclining position and the foot rest can be altered. In order to continue with the massage, press the PAUSE button again. Zero-G Function With this button you will place the massage chair into a total reclining position. Feet and head will be on one level. The massage is strongest in this position, as the entire body weight rests on the massage units.

On/OFF Press once on this button and the backlight of the Remote Control will start blinking: the chair is in idle mode. Press any massage function button to begin massage functions on the chair. This will also start the Timer. Press this button again to stop all massage functions, the massage rollers will return to its original position. Recline/Sit up These buttons allow you to chose the desired reclining- and sitting 29 position. 28 Lift Leg/Recline Leg With the help of these buttons you can optimally adjust23 foot rest. the Length Adjustment Control Button for Legrest With these buttons you can adjust the chair and the foot rest to your individual body size.
Full Body Auto programms Once you start one of the five automatic programs, the Auto Scan will begin to scan your body structure. During this you can manually adjust all sizes and adapt the massage chair to your requirements.
Demo Press this button for a brief demonstration of the features of the massage chair.

remote control

Timer At the start of a massage program a running period of 15 minutes is predetermined. You may retrospectively adjust this period by using the TIMER button. You have intervals of 5 minutes available to you. The end of the massage will be signalled by blinking and beeping of the control unit one minute prior to finish.
30 Lenght auto adjustment control button 37 The chair is equipped with an automatic length adjustment. With these chair to different body sizes. buttons you can adjust the 36
Neck-/Shoulder Neck/Shoulder Auto Programme Start/Stop Control Button. Back/Lumbar 37 Back/Lumbar Auto Programme Start/Stop Control Button. Full Air Full Body Auto Air Compression Function Control Button. Heat Lumbar Heat Function Control Button.
Localised Auto programms This programms give precise massage at the exact part of the body for better localized-massage effect.
Kneading Start/stop of kneading function. Here you can adjust the strength of the massage (STRENGTH) on 5 levels. This function can be combined with TAPPING; CLAPPING and SHIATSU. Strength The massage strength can be adjusted on 5 levels during the kneading function.
Partial Massage functions
Spot or localised back massage 39 With this button you can move the massage heads up and down to the desired spot. With repeated pressing the massage is continued over the entire back. Partial Back massage With this function you can massage different sections in an area of approx. 8 cm: neck- lumbar- or lower body area. With these buttons you can position the massage rolls at the desired back portion during the selected and/or partial massage

Tapping Start/stop of tapping function. In the tapping function you can choose the distance (WIDTH) of the massage rolls on 3 levels and the SPEED on 5 levels. Clapping Start/stop of clapping function. In the clapping function you can choose the distance (WIDTH) of the massage rolls on 3 levels and the SPEED on 5 levels. Shiatsu Start/stop of shiatsu function. In the shiatsu function you can choose the distance (WIDTH) of the massage rolls on 3 levels and the SPEED on 5 levels. Rolling Start/stop of rolling function. In the rolling function you can choose the distance (WIDTH) of the massage rolls on 3 levels. Swedish Swedish function Start/Stop Control Button- 5 levels of speed to be adjusted. Press this button once and it will activate the Swedish function for full back massage. Press again to stop the function. Speed The speed adjustment button for Tapping, Clapping, Swedish and Shiatsu mode. After activating the Tapping, Clapping, Swedish or Shiatsu function, every time the button is pressed, the strength can be adjusted in the cycle. Width Regulate the width of the massage rolls during the different functions: Tapping, Clapping, Swedish or Shiatsu.
VIBRATION AND AIRBAG MASSAGE IN THE SEAT- AND CALVE AREA
Airbagmassage back and Seat In this area you can add air pressure massage as you desire. This is available on 5 intensity levels, which are controlled with the AIR INTENSITY button. Shoulder Pressing the button will start/stop the shoulder air pressure massage. You can choose from 5 Settings by pressing the INTENSITY key. Calves Pressing the button will start/stop the vibration massage in the calve area. You can choose from 5 Settings by pressing the INTENSITY key. Arms Pressing the button will start/stop the arm air pressure massage. You can choose from 5 Settings by pressing the INTENSITY key. Intensity (Air pressure) With this button you can adjust the different intensity levels of the air pressure functions. Neck Pressing the button will start/stop the neck air pressure mode.You can choose from 5 Settings by pressing the INTENSITY key.
remote control Massagetechniken
remote control Inhaltsverzeichnis Massagefunktion/Funktionen
Seat vibration (Seat V) Press the Vibration button to start/stop the vibration.

Massage techniques

With the different programs the chair simulates the techniques of a traditional hand massage:
Tapping During the TAPPING short knocking movements are performed with the edge of the hand, the flat hand or the fist. They enhance the circulation of the skin and change the tension in the muscles. If tapping is performed at the level of the lungs, it will relieve mucus build-up in the lungs. CLAPPING During CLAPPING the circulation in the deep muscles is improved by light knocking with the hollow hand. Simultaneously this massage technique also stimulates the nerve system. The CLAPPING reduces tension and promotes the tightening of the connective tissue. This gentle kind of massage stimulates the organism. ROLLING The ROLLING is a pleasant change between tension and release of the muscles and therefore is especially calming and relaxing. This technique is often used as a conclusion of the massage for relaxation of the muscles and for regeneration.

SHiaTSU SHIATSU (finger pressure) is a form of body therapy developed in Japan. The massage technique consists of gentle rhythmic twists and rotations with deep effect. SHIATSU aims to stimulate individual points in the body and to mobilise the muscles. SWEDISH Combination of TAPPING und CLAPPING.

Troubleshooting

error adjustment
The Massage Chair cannot operate even though it has been connected to the power supply.
Check where the plug is well connected and working well. Check whether the switch on the Massager Chair is turned to I position. The Massage Chair could be overheated after prolonged use. It will automatically cool down to resume its normal condition. Please turn OFF the power and allow the Chair to cool off for 40 to 50 minutes.
KNEADING Skin and muscles are either captured or kneaded between thumb and index finger or with both hands. This massage technique is especially used to relieve tension. During operation, the Controller is working but not the Massage Chair.
KOMPRESSION Swelling and deflating of the air bags causes a pumping motion, which creates natural muscle reflexes. This is especially pleasant in the calf- and foot area.

Care instructions

HEATING A deep and warmth-radiating effect, where one can relax perfectly. This function is especially enjoyable in case of muscle tension due to its deep effect. You have acquired a product made from high quality materials. This requires the appropriate care. Please treat the surfaces with the recommended care products on a regular basis so you will enjoy your chair for a long time. Please ask your dealer regarding the CASADA vinyl- and leather care products:
VIBRATION The VIBRATION transforms entire body regions into even vibrations, which continue all the way into the depths. Stimulating for circulation, warming and relaxing for the muscles.
Massage techniques / Troubleshooting / care instructions Inhaltsverzeichnis

Storage

1. Recommended storage: dry, dust-free. Please roll up the wire. 2. Do not store next to a heater or open flame. Do not expose to direct sun.

Warranty conditions

The dealer grants the statutory warranty period on the product described overleaf. The warranty applies from the date of purchase. The date of purchase is demonstrated by the sales receipt. The dealer is to repair or replace products registered within Germany which are found to be defective free of charge. Parts subject to wear and tear such as cloth covers are not covered. To assert your claim, simply return the defective product with the sales receipt before the end of the warranty period. The warranty claim does not apply if it is established that a defect has occurred e.g. through external influence or as a result of repair or alteration not carried out by the manufacturer or an authorized dealer. The warranty granted by the seller is limited to repair or replacement of the product. Under this warranty, the manufacturer or seller has no further liability and is not responsible for damage caused by disregard of the operating instructions and/or improper use of the product. If inspection of the product by the seller reveals that the warranty claim relates to a defect not covered by the warranty or that the warranty period has expired, the cost of the inspection and repair are to be borne by the customer.

Conformity Declaration

We hereby declare that the massage chairs CMS-360 / CMS-361 / CMS-362 Kennedy III comply with the following relevant regulations: EMC directive (2004/108/EC) Applied harmonised European Norms: EN 55014-1:2006 EN 55014-2:1997/+A1:2001 EN 61000-3-2:2006 EN 61000-3-3:1995+A1: 2001+A2: 2005
Storage / conformity declaration
Accredited Test Centre: Timeway Testing Laboratory
Casada Group GmbH Obermeiers Feld Paderborn, Germany phone (+49) (54) 98 - 0 fax (+49) (54) 98 - 30 Email: info@casada.com Web: www.casada.com Copyright Images and texts are subject to the copyright of Casada Group GmbH and may not be used for other purposes without express confirmation. Copyright (c) 2010 Casada Group GmbH. All rights reserved.