Standard jack

RIGHT (Red) LEFT (White) Audio amplifier AUX IN jack, etc.
Portable audio player, etc.
Guitar amplifier Keyboard amplifier, etc. Standard plug

INPUT 1 INPUT 2

Be sure to push the headphones plug into the PHONES jacks as far as it will go. If you dont, you may hear sound from only one side of the headphones. If the plug of the headphones you are using does not match the PHONES jacks, use the applicable commercially available adaptor plug. If you are using headphones that require an adaptor plug, make sure you do not leave the adaptor plugged in when you unplug the headphones. If you do, nothing will sound from the speakers when you play.
Playing Output from External Equipment through the Pianos Speakers
Use commercially available cables to connect the external audio equipment to the pianos LINE IN jacks as shown in Figure. LINE IN R jack input sounds through the pianos right speaker, while LINE IN L/MONO jack input sounds through the left speaker. Connecting to the LINE IN L/MONO jack only causes the same output to be produced from both speakers. It is up to you to purchase connecting cables that are compatible with the equipment you are connecting.
Connecting to Audio Equipment
Use commercially available cables to connect the external audio equipment to the pianos LINE OUT jacks as shown in Figure. LINE OUT R jack output is right channel sound, while LINE OUT L/MONO jack output is left channel sound. It is up to you to purchase connecting cables like the ones shown in the illustration for connection of audio equipment. Normally in this configuration you must set the audio equipments input selector to the setting that specifies the terminal (such as AUX IN) to which the piano is connected. Use the pianos VOLUME controller to adjust the volume level.
Bundled and Optional Accessories
Use only accessories that are specified for use with this Digital Piano. Use of unauthorized accessories creates the risk of fire, electric shock, and personal injury.
You can get information about accessories that are sold separately for this product from the CASIO catalog available from your retailer, and from the CASIO website at the following URL. http://world.casio.com/
Connecting to a Musical Instrument Amplifier
Use commercially available cables to connect the amplifier to the pianos LINE OUT jacks as shown in Figure. LINE OUT R jack output is right channel sound, while LINE OUT L/MONO jack output is left channel sound. Connecting to the LINE OUT L/ MONO jack only outputs a mixture of both channels. It is up to you to purchase connecting cable like the one shown in the illustration for connection of the amplifier. Use the pianos VOLUME controller to adjust the volume level.

Example C (C Major)

C C#DE b E F F#GAb A Bb B C C#DE b E F

Note name

Chord fingering mode
Use the (w, q) buttons to select the chord fingering mode you want. Press the (ACCOMP ON/OFF) button.
This exits the chord fingering screen.
Minor Chords Cm (C minor) Press the chord keyboard key that corresponds to the major chord, while also pressing one other chord keyboard key to the right. Seventh Chords Press the chord keyboard key that corresponds to the major chord, while also pressing two other chord keyboard keys to the right. Minor Seventh Chords Press the chord keyboard key that corresponds to the major chord, while also pressing three other chord keyboard keys to the right.

C7 (C seventh)

Fingered 1, 2, 3
With these three chord fingering modes, you play chords on the chord keyboard using their normal chord fingerings. Some chord forms are abbreviated, and can be fingered with one or two keys. For information about the types of chords you can finger and their fingerings, see the Fingering Guide (page A-9).

Cm7 (C minor seventh)

When pressing more than one chord keyboard key, makes no difference whether the additional keys are white or black.

FULL RANGE CHORD

Fingered 1: Play the component notes of the chord on the keyboard. Fingered 2: Unlike Fingered 1, 6th input is not possible with this mode. Fingered 3: Unlike Fingered 1, this mode allows input of fraction chords with the lowest keyboard note as the bass note.
With this chord fingering mode, you can use the full range of the keyboard to play chords and the melody. For information about the types of chords you can finger and their fingerings, see the Fingering Guide (page A-9).
Melody keyboard Chord keyboard
Modifying Auto Accompaniment Patterns
There are six different Auto Accompaniment patterns, shown below. You can switch between patterns during accompaniment play and even modify patterns. Use buttons through to select the pattern you want.

Using One-Touch Presets

One-Touch Preset gives you one-touch access to tone and tempo settings that go well with the currently selected Auto Accompaniment rhythm pattern.
Hold down the (RHYTHM) button for at least two seconds.
This will configure tone, tempo, and other settings to match the currently selected rhythm pattern. At this time, Auto Accompaniment play also will go into synchro standby, which means that Auto Accompaniment will start to play automatically when you finger a chord.

Intro *1

Normal

Variation

Ending *4

Normal fill-in *2

Variation fill-in *3
Play a chord on the keyboard.

Rhythm Select: Rhythm

001 to 190: Rhythm number
Repeat steps 3 through 5 to edit all of the accompaniment patterns and parts you want. After editing is complete, adjust the tempo of the rhythm as desired.
The tempo you set here becomes the initial default tempo of the rhythm.
10. Decide on the user rhythm number where you
want to save the rhythm and a rhythm name. Use the (u) and (i) buttons to move the
cursor to the user rhythm number and rhythm name character you want to change. Use the (w, q) buttons to select the number or character you want. The rhythm name characters you can select are shown below. To input a space, press both of the (w and q) buttons at the same time.

Press the (EXIT) button.

This causes a confirmation message to appear asking if you want to save your edits.

Press the (YES) button.

This displays a screen for specifying the user rhythm number and rhythm name. If you want to exit the editing operation without saving, press the (NO) button instead of the (YES) button.
11. Press the (ENTER) button.
This saves the data. If the rhythm number where you are saving the data already has data saved to it, a message (Replace?) will appear on the display to confirm whether you want to replace the existing data with the new data. Press the (YES) button to replace. To cancel the save operation and return to the screen in step 9, press the (NO) button instead.
Rhythm name Destination user rhythm number
Saving user rhythm data to a user rhythm number that already has data will cause the existing data to be replaced by the new data.
If the size of the accompaniment pattern or instrument part data is too large to be edited, a memory full message (Memory Full) will appear on the display. If that happens, select a different accompaniment pattern or instrument part for editing.
Playing Back Built-in Songs

6PLAY/STOP

2REPEAT
Song groups A to D Tone groups
Playing Back All of the Built-in Songs
Your Digital Piano comes with a total of 68 built-in songs: eight demo songs that are arranged to highlight the characteristics of the tones in each of the tone groups, and 60 classics in the Music Library. You can configure the Digital Piano to play back these songs in sequence. See Song List (page A-6) for a list of built-in songs.

Use the to (Song group A to D) buttons to select the group you want. Press button (Group D) if you want to select a user
song. Example: When Group B is selected
Playing on the Keyboard Using the Same Tone as the Song
Hold down the (MUSIC LIBRARY) button for at least two seconds.
This will assign the same tone as the right hand part of the current song to the keyboard.
Use the (w, q) buttons to select the song you want.
Example: When 008 Gavotte is selected
You can use the procedure under Practicing Either Hands Part (Part Off) (page E-25) to turn off the left hand part and play along on the keyboard using the left hand part tone.

Song number

Song name
Adjusting the Song Volume
You can use the following procedure to adjust the volume level of the songs Auto Accompaniment, without affecting the volume of keyboard tone output. For details, see Song Volume (page E-41).
Repeating Playback of a Specific Section (Repeat)
You can configure the Digital Piano to repeat the section of a song you want to practice. You could, for example, specify repeat play from measure 5 to measure 8.

Start End

Practicing Either Hands Part (Part Off)
You can turn off the right hand part or left hand part of a song and play that part on the Digital Piano while the song plays back.
These measures are repeated.

Press the (PART) button.

This causes L-[ON] R-[ON] to appear on the display.
This starts playback of the song.
Use the (w, q) buttons to turn off the part you want.
Press (w) to toggle the left hand part or (q) to toggle the right hand part on and off.
When playback reaches the first measure of the section you want to repeat, press the (REPEAT) button.
This makes the measure the start measure. The (REPEAT) button lamp flashes at this time.
Press the (PART) button again.
This exits the part on/off screen.
This will assign the same tone as the hand that is turned off to the keyboard.
When playback reaches the last measure of the section you want to repeat, press the (REPEAT) button again.
This makes the measure the end measure. Repeat playback of the specified section starts as soon as you select the end measure. The (REPEAT) button lamp is lit (not flashing) at this time.
Press the (PLAY/STOP) button to start song playback.
The part you turned off does not sound, so you can play it on the keyboard.
Sounding a Count at the Beginning of a Song
You can configure the Digital Piano to sound a count before playback of a song starts, which helps to get the timing right when you are playing along on the keyboard. For details, see Pre-count (page E-42).
Pressing (REPEAT) again returns to normal play. This will cause the (REPEAT) button lamp to go out.

Music Presets

After all editing operations are complete, press the (EXIT) button to return to the editing operation selection screen (page E-27).
A single preset can contain up to approximately 2,000 chords. If your edits cause the chord limit to be exceeded, the message Memory Full will appear on the display and further editing will become impossible.
To edit Auto Accompaniment parameters
Use the (u) and (i) buttons to select a parameter, and the (w, q) buttons to change its setting.
Parameter SYNCHRO TYPE: Synchro type DRUM ON/OFF: Drum on/off PERC ON/OFF: Percussion on/off BASS ON/OFF: Bass on/off Description Selects the synchro standby status and type when the Music Preset is selected. Setting 0 Off: Off (no standby) 1 Normal: From standby to normal pattern 2 Variation: From standby to variation pattern 3 Intro: From standby to intro pattern OFF: Mutes the part. ON: Sounds the part. OFF: Mutes the part. ON: Sounds the part. OFF: Mutes the part. ON: Sounds the part. OFF: Mutes the parts. ON: Sounds the parts. C - B: Major (C to B) Cm - Bm: Minor (Cm to Bm) C - B: Major (C to B) Cm - Bm: Minor (Cm to Bm) OFF: Fill-in not inserted ON: Fill-in inserted
Toggles the drum part (page E-21) on or off. Toggles the percussion part (page E-21) on or off. Toggles the bass part (page E-21) on or off. Toggles the Chord 1 through 5 parts (page E-21) on or off. Selects from among major ( 12 keys) and minor ( 12 keys) for the intro chords. Selects from among major ( 12 keys) and minor ( 12 keys) for the ending chords. Specifies whether or not a fill-in should be inserted into the final measure of a chord progression.
CHORD1 - - 9 ON/OFF: Chord 1 - 5 on/off INTRO CHORD: Intro chord ENDING CHORD: Ending chord AUTO FILL-IN: Auto fill-in on/off
TIMING SET: Chord progression variation
1 Normal: Edited chord progression proceeds as-is. This parameter lets you add different 2 Half: Halves chord timing within a measure. variations to the timing of the chord 3 Double: Doubles chord timing within a progression being edited. You can use it to measure. match the chord progression to the beat of a 4 3/4: Multiplies chord timing within a measure specific rhythm. by 3/4. Select this setting to match to a A chord (step) that is outside of the rhythms 6/8 time rhythm. beat is cut off. 5 6/4: Multiplies chord timing within a measure by 3/2. Select this setting to match to a 6/4 time rhythm.
On the editing operation selection screen (page E-27), select Parameter and then press the (ENTER) button to display the Auto Accompaniment parameter editing screen shown below.
Registering Tone and Rhythm Setups

btw, q brREGISTRATION

Tone and accompaniment areas Tone areas

FileName

Format
1. Format the memory card on the Digital Piano (page E-45). 2. Use a memory card with a capacity of 2GB or less. 3. Use a different memory card. 1. Delete some of the files on the memory card to make room for new data (page E-47), or use a different card. 2. Delete some or all user data from Digital Piano memory to make room for new data. 1. Use a different memory card. 2. Back-up Digital Piano memory data by copying it to your computer, and then turn the Digital Piano off and then back on again. Note that you may not be able to back-up Digital Piano data in certain cases.

MediaFull

1. There is not enough room available on the memory card. 2. There is not enough room available in Digital Piano memory.

Media R/W

1. Memory card data is corrupted. 2. Digital Piano memory is corrupted.

No Card

1. The memory card is not loaded correctly in the Digital 1. Correctly load the memory card into the memory card slot. Pianos memory card slot. 2. The memory card was removed while some operation 2. Do not remove the memory card while any operation is in was in progress. progress.

No Data

You tried to save a Digital Piano user area (user rhythm, user rhythm song, etc.) that does not contain any data to the memory card. 1. There is no MUSICDAT folder (page E-46) on the memory card. 2. There is no loadable or playable data in the MUSICDAT folder, or there is no playable data in a song playback folder (MUSIC__B, etc.)
Select a user area that contains data.

No File

1. Create a MUSICDAT folder on the memory card or format the memory card on the Digital Piano (page E-45). 2. Move the file you want to load or play into the memory cards MUSICDAT folder. For song playback, you can place the song data into any one of the following folders: MUSIC__B, MUSIC__C, or MUSIC__D.
Not SMF01 Protect ReadOnly
You are attempting to play back SMF Format 2 song data. This Digital Piano supports playback of SMF Format 0 or Format 1 only. The memory card is write-protected. Use the memory cards write protect switch to enable writing.
A read-only file with the same name you are trying to use Use a different name to save the new file. is already stored on the memory card. Remove the read-only attribute from the existing file and overwrite it with the new file. Use a different memory card. 1. The data on the memory card is too big to play. 2. The data you are trying to load is too large. 1. This Digital Piano supports playback of song data files with a maximum size of 320KB. 2. The following is the maximum data size (per data item) when loading data into Digital Piano memory. User rhythm: Approximately 40KB User Song: 320KB User Music Preset: Approximately 8KB

SizeOver

WrongDat
1. The memory card data is corrupted. 2. The memory card contains data that is not supported by this Digital Piano.

Connecting to a Computer

You can connect the Digital Piano to a computer and exchange MIDI data between them. You can send play data from the Digital Piano to music software running on your computer, or you can send MIDI data from your computer to the Digital Piano for playback.
Connecting the Digital Piano to Your Computer
Minimum Computer System Requirements
The following shows the minimum computer system requirements for sending and receiving MIDI data. Check to make sure that your computer complies with these requirements before connecting the Digital Piano to it. Operating System Windows XP (SP2 or later)*1 Windows Vista *2 Windows 7 *3 Mac OS X (10.3.9, 10.4.11 or later, 10.5.6 or later, 10.6.2 or later) *1 Windows XP Home Edition Windows XP Professional (32-bit) *2 Windows Vista (32-bit) *3 Windows 7 (32-bit, 64-bit) USB port
Make sure you follow the steps of the procedure below exactly. Connecting incorrectly can make data send and receive impossible.
Turn off the Digital Piano and then start up your computer.
Do not start up the music software on your computer yet!
After starting up your computer, use a commercially available USB cable to connect it to the Digital Piano.
B connector USB cable (A-B type)

A connector

Digital Piano USB port

Computer USB port

Turn on the Digital Piano.
If this is the first time you are connecting the Digital Piano to your computer, the driver software required to send and receive data will be installed on your computer automatically.
Never connect to a computer that does not conform to the above requirements. Doing so can cause problems with your computer.
Start up your computers music software. Configure the music software settings to select one of the following as the MIDI device.
CASIO USB-MIDI : (For Windows Vista, Windows 7, Mac OS X) USB Audio Device: (For Windows XP) For information about how to select the MIDI device, see the user documentation that comes with the music software you are using.
Be sure to turn on the Digital Piano first before starting up your computers music software.
Once you are able to connect successfully, there is no problem with leaving the USB cable connected when you turn off your computer and/or Digital Piano. This Digital Piano conforms to General MIDI Level 1 (GM). For detailed specifications and connections that apply to MIDI data send and receive by this Digital Piano, see the latest support information provided by the website at the following URL. http://world.casio.com/

To exit the storage mode at any time, press the (FUNCTION) button. This is the only button operation that is supported while the Digital Piano is in the storage mode. You will not be able to enter the storage mode while any one of the following operations is in progress. Metronome, Auto Accompaniment, song playback, recorder (on), Auto Accompaniment editing, Music Preset editing, data transfer between the Digital Piano and card
Referring to the table below, open the folder that corresponds to the type of data you want to transfer.
Open this data Data File Name folder RHYTHMAC BIDRHYnn.AC7 (nn: 01 to 10) BIDSNGnn.MID (nn: 01 to 10) (SMF Format 0 or Format 1) BIDSNGnn.CM2 (nn: 01 to 10) (CASIO format) BIDMPSnn.MPS (nn: 01 to 50) BIDRECnn.CSR (nn: 01 to 05) BIDREGAL.CR6
To load this type of data User rhythms (page E-20)
If your computer is running Windows XP, double-click My Computer.*
Under Devices with Removable Storage, you should be able to see a folder representing Digital Piano memory or the memory card loaded in the Digital Piano (see below). * Windows Vista, Windows 7: Double-click Computer. Mac OS: Skip step 4 and double-click PIANO on your Mac desktop.

User songs (page E-24)

MUSICLIB
User Music Presets (page E-27) Recorder songs (page E-34) Registration (page E-32)
MUSICPST RECORDER REGISTMR
Data types and contents are the same as those when saving Digital Piano data to or loading it from an SD memory card. See Using a Memory Card (page E-43) for more information.
PIANO drive (Digital Piano memory)
File name extensions (.MID,.CM2, etc.) are not displayed under initial default Windows settings. Perform the procedure below to turn on display of file name extensions.
(1) Open any one of the folders shown on page E-53. (2) Perform one of the following operations to display folder information. Windows XP: On the [Tools] menu at the top of the folder window, select [Folder Options]. Windows Vista, Windows 7: On the left side of the folder window, click [Organize] and then select [Folder and Search Options]. (3) On the Folder Information window, click the [View] tab. (4) Under Advanced Settings, clear the Hide extensions for known file types check box and then click [OK].
Press the (FUNCTION) button to exit the storage mode.

If you are using a Macintosh, drag the PIANO folder to the Trash and then press the Digital Pianos (FUNCTION) button.
The message ERROR, DATA EXCHANGE will appear on the display if a problem occurs during data transfer. If this happens, check the message in the STATELOG folder (page E-53) on the PIANO drive. Next find the same message in the table on page E-50 of this manual to determine the cause of the problem and what action you need to take to avoid it.
After opening a data folder, perform either of the following operations to transfer data.
8-1. To transfer data from Digital Piano memory to a computer, perform the required operation on your computer to copy the data from the Digital Piano folder you opened in step 6 of this procedure to another location on your computer. 8-2. To load data from your computer to Digital Piano memory, first copy the data you want to load to the data folder you opened. Next, rename the file as shown in the Data File Name * column in the table under step 6 of this procedure.
* The value you assign for nn in the data file name in this case specifies the user number (user rhythm, user song, recorder song, user preset) you want the data to be assigned to. Example: Renaming downloaded song data to BIDSNG04.CM2 to the MUSICLIB folder will make the data user song 004.
Playing Back User Song Data by Copying It to the PIANO Drive
You can use the procedure below at any time to copy user song data to the PIANO drive (without putting it in the MUSICLIB folder) for simplified playback on the Digital Piano. When you copy a user song data file to the MUSICLIB folder, you need to rename it according to specified format (page E-53, step 6). You do not need to rename the file if you use the procedure below.
Using Your Digital Piano as a Memory Card Reader
You can display the contents of the memory card currently loaded in the Digital Pianos card slot and perform copy, delete, and other card operations from your computer.
Insert the memory card into the Digital Pianos memory card slot. Perform the procedure starting from step 2 on page E-52.
In step 4 of the procedure, SD_MMC will appear in place of PIANO. You can double-click SD_MMC to display the contents of the card loaded in the Digital Piano card slot, and change it as you like.

E-41 E-41 E-41

E-11 E-42
See Error Messages on page E-50.
Digital noise from the USB cable or power cord caused data communication your computer and Digital Piano to be interrupted.
Stop song playback, disconnect the USB cable from the Digital Piano, and then reconnect it. Next, try playing back the song again. If this does not solve the problem, quit the MIDI software you are using, disconnect the USB cable from the Digital Piano, and then reconnect it. Next, restart the MIDI software and then try playing back the song again.
A tones quality and volume sounds slightly different depending where it is played on the keyboard.
This is an unavoidable result of the digital sampling process,* and does not indicate malfunction. * Multiple digital samples are taken for the low range, middle range, and high range of the original musical instrument. Because of this, there may be a very slight difference in tonal quality and volume between sample ranges.
Performing a button operation while playing with the Duet Mode, Auto Accompaniment, the recorder, or When I press a button, the note other functions can cause such phenomena when the Digital Piano switches internal tone effects. It does that is sounding cuts out not indicate malfunction. momentarily or there is a slight change in how effects are applied. Even though I play on different ranges of the keyboard, the notes do not change octaves. The ranges of certain tones are limited, which means that octaves change normally up to a certain low note or high note. With such a tone, the notes of the lowest octave will be repeated to the left of the lowest possible note, and the highest octave will be repeated to the right of the highest possible note. This is due do limitations in the range of the original musical instrument for each tone, and does not indicate malfunction of the Digital Piano.

Troubleshooting

Product Specifications
All of the items in these specifications apply to the AP-620BK, AP-620BKV, AP-6BP, and AP-6BPV, unless specifically noted otherwise.
Models Keyboard Maximum Polyphony Tones Effects Metronome Duet Auto Accompaniment AP-620BK/AP-620BKV/AP-6BP/AP-6BPV 88-key piano keyboard, with Touch Response (3 types) 128 notes 250 (with Layer and Split) Reverb (4 types), Chorus (4 types), Brilliance (3 to 0 to 3), Acoustic Resonance Beats per measure: 0, 2, 3, 4, 5, 6 Tempo Range: 20 to 255 Adjustable tone range: 0 to 3 octaves for the left keyboard; 4 to 1 octaves for the right keyboard Built-in Rhythms: 180 User Rhythms: Up to 10 (Approximately 40KB* maximum per rhythm) One Touch Presets: 180 types Auto Harmonize: 12 types

Music Preset List/Lista de preajustes musicales
A POPS ROCK 73 DANCE 74 Soft Pop Winter Pop Oldies Pop Alpine Flora Gypsy Rain Pop Movie Waltz Blowin in Funky Rspct Love Pop Loco Rising Sun Believer Pop Ska Weep Blues Sugar Pop JoyWorldPop My Life Ribbon Blue Love Xmas Pop Close Going On 70s Pop West Coast Bossa Pop Radio Pop Crazy Roll Ivory Pop UK Pop Breath You A Feeling Calling Take On The World PlaceOnEarth Mexican Pop Guitar Pop W Up Sign Wonder Hips D Lie Say Right MdrnPopRock Rock Clock Johnny Heartache EP R&R Pop R&B 60s Rock 1 60s Rock 2 60s Rock 3 60s Rock 4 60s Rock 5 Get Rock Honky Rock Wild Rock Alligator The Tiger Pop Rock 16Bt Rosa Heat Up Hard Rock Grunge Rock Latin Rock Hanging By R&R Piano R&R Blues 8 Bars Blues Riff Rock 1 Riff Rock 2 Riff Rock 3 Disco Freak B CLASSIC Canon Air G String Je Te Veux Adagio Spring Ave Maria JesusBleibet Symphony 25 Symphony 40 HungriaDance Eine Kleine Pathetique Moonlight PstlSymphony Ode To Joy Le Cygne Swan Lake Valse Fleurs Habanera Nocturne Etude FrenchCancan FantaisieImp Humoresque Pavane Hope & Glory Moldau FromNewWorld Reverie
Group Number/ Nmero de grupo
Sequential Number/ Nmero secuencial
Preset Name/ Nombre de preajuste

JAZZ 119 120

119 120
Funky Clavi Earth Disco 70s Disco Disco Lady Staying Upside 80s Disco Give You Up Bb Girl Blv Disco Lady M Out Of My H Euro Pop Dont Funk Trance The Escape Wonderland My Swing Things Angel Time Leaf Blackbird Dolphin Roses Steps RhythmChange Swing Mood The Mood Brown Jug Lullaby Night Street Doll Someday Mode Jazz Train Tea Time Jazz Waltz Home Blues in F Blues in Bb Blues in C II-V II-V-I Minor Blues
TRAD 60 LATIN COUNTRY 99 100
Nutcracker Liebestraume Gymnopedies Jupiter Entertainer MapleLeafRag Michael Row GrndpasClock Troika AuldLangSyne Aloha Oe O Sole Mio Furusato SzlaDziweczk Battle Hymn Condor ScarboroFair Danny Boy Greensleeves Annie Laurie AmazingGrace WeWishU Xmas Silent Night Joy To World YankeeDoodle Clarnt Polka TaRaRaBoom Double Eagle Blauen Donau Yellow Rose BeautDreamer Moon Bossa Your Smile Rio Bossa Blue One Note Wave Bossa Out Of Tune Quiet Star Insentive Brzl Samba Orpheus Tico-Tico Beguine Amapola La Paloma Banana Boat Peanut Coffee Jamaica MoreBeguine The No.5 Everyday Mucho El Tango El Choclo Sheriff No Woman Cant Help Livin Whenever This Land My Sunshine Walk Line Home Roads A Friend Cowboy Still One Breath CountryWaltz He Cheats

JAZZ BALLAD 79 80

299 300
Xmas Ballad Love Me Oldies Bld 1 Oldies Bld 2 Oldies Bld 3 Oldies Bld 4 E World Tears Moon Waltz As Theme Paradise 60s Ballad1 60s Ballad2 Whiter Shade FrenchBallad Everywhere Wonderful 70s Ballad1 70s Ballad2 My Song Bridge Img Ballad Without Not In Love Soft Ballad We Were Minor Ballad Pop Ballad 1 Pop Ballad 2 PianoBallad1 PianoBallad2 Musical Bld R Ballad Always Mind Endless 80s Ballad1 80s Ballad2 80s Ballad3 80s Ballad4 Friends For Rock Ballad Eternal Everything Save Best Of The Road I Always New World Vision I Can Fly Wind Ballad Love To You My Ballad Beautiful Scrubs Falling BlngTogether B Day Rap Ballad Dance Ballad MdrnRock Bld Slow Ballad Kiss Rose Summer New York B&S L Alone Foggy Moon Swing Foolish Valentine Midnight Journey Star Starlight

C BALLAD Love Ballad R&B Ballad Soul Ballad Blues Ballad MovieBallad1 MovieBallad2
Fingering Guide/ Gua de digitacin
Fingered 1, Fingered 2 Chords/ Acordes Fingered 1, Fingered 2
C Cm Cdim Caug *3 Csus4 *3 Csus2 *3 C7 Cm7 *3 CM7 Cm7b5 *3 C7b5 *3 C7sus4 Cadd9 Cmadd9 CmM7 Cdim7 *3 C69 *3 C6 *1 *3 Cm6 *2 *3
*1 With Fingered 2, interpreted as Am7. *2 With Fingered 2, interpreted as Am7b5. *3 Inverted form not supported in some cases. *1 Con Fingered 2, se interpreta como Am7. *2 Con Fingered 2, se interpreta como Am7b5. *3 En algunos casos no se puede usar de forma invertida.
Fingered 3, Full Range Chords/ Acordes Fingered 3, Full Range
In addition to the chords that can be fingered with Fingered 1 and Fingered 2, the following chords also are recognized. Adems de los acordes que se pueden digitar con Fingered 1 y Fingered 2, tambin se pueden reconocer los siguientes acordes.
Fm C bm Ddim A b7 F7 Fm7 Gm7 A badd9 Gm Am B C C C C C C C C C C# C D C E C F C G C Ab C Bb C B C C #m Dm C C
With Fingered 3, the lowest note fingered is interpreted as the base note. Inverted forms are not supported. With Full Range Chord, when the lowest fingered is a certain distance from the neighboring note, the chord is interpreted as a fraction chord. Unlike Fingered 1, 2, and 3, Full Range Chord requires pressing of at least three keys to form a chord.
Con Fingered 3, la nota ms baja digitada se interpreta como nota base. No se pueden usar formas invertidas. Con Full Range Chord, cuando la nota digitada ms baja se encuentre a cierta distancia de la nota adyacente, el acorde se interpreta como un acorde bitonal. A diferencia de Fingered 1, 2, y 3, Full Range Chord requiere la pulsacin de tres teclas como mnimo para formar un acorde.
(D#)/Eb E F G A B F#/(Gb) (G#)/Ab (A#)/Bb

Chord Type

C#/(Db)
Chord Example List/Lista de ejemplos de acordes
Since the chord input range is limited, this model may not support some of the chords shown above.
Debido a que el rango de entrada de acordes es limitado, es posible que este modelo no admita algunos de los acordes mostrados arriba.

Model AP-620/AP-6

Transmitted Recognized

Version : 1.0

Function

Remarks

Basic Channel
Default Changed Default Messages Altered

1 - - 16 Mode 3 X

Note Number
0 - 127 True voice Note ON Note OFF Keys Chs O 9nH v = 1 - 127 X 8nH v = 64 X X X
0, 5 6, 100, 121 O X X X O X X X X X X O X O O X X X X X X X X O O X O O
0 - - 127*1 O 9nH v = 1 - 127 X 9nH v = 0, 8nH v =** X O O
O O O O O O O O O O O O O O O O O O O O O O O O O O O O Bank select Modulation Portamento Time Data entry LSB, MSB*2 Volume Pan Expression DSP Parameter0*2 DSP Parameter1*2 DSP Parameter2*2 DSP Parameter3*2 Damper Portamento Switch Sostenuto Soft pedal Vibrato rate Vibrato depth Vibrato delay DSP Parameter4*2 DSP Parameter5*2 DSP Parameter6*2 DSP Parameter7*2 Portamento Control Reverb send Chorus send RPN LSB, MSB*2 All sound off Reset all controller