Reviews & Opinions
Independent and trusted. Read before buy Casio CTK-558!

Casio CTK-558

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Casio CTK-558, size: 6.8 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Casio CTK-558About Casio CTK-558
Here you can find all about Casio CTK-558 like manual and other informations. For example: price, review.

Casio CTK-558 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Casio CTK-558 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Casio CTK-558 photo ]

Video review

Keyboard Cover Daiji Daiji (Mahoraba opening)

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
waharris007 11:53pm on Thursday, October 7th, 2010 
CTK-558 - great keyboard! This is a wonderful keyboard with a great sound and ease-of-use. However, if I had to purchase it today.
autszajder 11:52am on Wednesday, June 30th, 2010 
WARNING about the picure The picture displayed with the CASIO CTK 558 appears to be the more expensive WK1600.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc1

Using Built-in Songs to Master Keyboard Play. E-29
Phrases.. E-29 Step Up Lesson Flow.. E-29 Selecting the Song, Phrase, and Part You Want to Practice.. E-30 Lessons 1, 2, and 3.. E-31 Lesson Settings.. E-32 Using Auto Step Up Lesson.. E-34
Playing the Digital Keyboard.. E-9
Turning on Power and Playing..E-9 Using Headphones..E-9 Changing Keyboard Response to Touch Pressure (Touch Response).E-10 Adjusting Display Contrast.E-10 Using the Metronome..E-11
Controlling the Keyboard Sounds. E-12
Select from a variety of musical instrument sounds..E-12 Layering Two Tones...E-13 Splitting the Keyboard between Two Different Tones..E-13 Using Reverb..E-14 Using Chorus..E-14 Using a Pedal...E-15 Changing the Pitch (Transpose, Tuning, Octave Shift)..E-15 Using the Pitch Bend Wheel to Shift the Pitch of Notes (CTK-5000 Only)..E-16
Music Challenge Keyboard Game. E-35 Using Auto Accompaniment. E-36
Playing the Rhythm Part Only. E-36 Playing All Parts.. E-37 Using Auto Accompaniment Effectively. E-39 Using One-Touch Preset.. E-40 Using Auto Harmonize.. E-41
Editing Auto Accompaniment Patterns.. E-42 Saving Keyboard Setups to Registration Memory. E-46
To save a setup to registration memory. E-47 To recall a setup from registration memory.. E-47
Sampling Sounds and Playing Them on the Digital Keyboard.. E-17
Connection and Preparation..E-17 Sampling and Playing a Melody Sound (Melody Sampling)..E-18 Incorporating a Sampled Sound into a Drum Set (Drum Sampling)..E-20 Other Sampling Functions..E-22
Recording Your Keyboard Play.. E-48
Recording and Playing Back Keyboard Play. E-48 Using Tracks to Record and Mix Parts. E-49 Recording Two or More Songs, and Selecting One for Playback.. E-51 Recording while Playing Along with a Built-in Song... E-51 Saving Recorded Data on an External Device.. E-52
Changing the Scale of the Keyboard.E-53 Using Music Preset..E-56 Using the Arpeggiator..E-56 Deleting User Song Data..E-57 Deleting All Data in Digital Keyboard Memory..E-58
MIDI Implementation Chart
Using a Memory Card (CTK-5000 Only). E-59
SD Memory Card and Card Slot Precautions..E-59 Inserting and Removing an SD Memory Card...E-60 Formatting an SD Memory Card..E-60 Saving Digital Keyboard Data to an SD Memory Card...E-61 Loading Data from an SD Memory Card into Digital Keyboard Memory..E-62 Deleting Data from an SD Memory Card..E-63 Playing Back Data from an SD Memory Card...E-64 SD Memory Card Error Messages.E-64
Connecting External Devices.. E-65
Connecting a Computer..E-65 MIDI Settings..E-66 Storing and Loading Digital Keyboard Memory Data..E-68 Connecting to Audio Equipment..E-69

Included Accessories

Disabling Auto Power Off

You can disable Auto Power Off to ensure that power is not turned off automatically during a concert, etc.
1. While holding down bo, turn on power.
Auto Power Off will be disabled.
Changing Keyboard Response to Touch Pressure (Touch Response)
Touch Response alters tone volume in accordance with keyboard pressure (speed). This provides you some of the same expressivity you get on an acoustic piano.
Changing Touch Response Sensitivity
Use the procedure below to control how much the volume of played notes change in accordance with playing speed. Select the setting that best matches your playing style.
1. Press cs and then use the br (10-key) [4] (
and [6] ( E-6). ) keys to display Touch (page
Keyboard Instrument Sound Intensity
Sound intensity depends on the speed that keys are pressed.
People normally believe that the stronger the pressure applied to a piano keyboard, the louder the sound. Actually, however, the intensity of the notes played depends on the speed at which keys are pressed. Notes are louder when keys are pressed quickly, and quieter when keys are pressed slowly. Keeping this in mind as you play a keyboard musical instrument lets you control note volume without striving to apply too much pressure with your fingertips.
2. Use br (10-key) [] and [+] keys to select one of
the three Touch Response sensitivity settings.
Off (oFF) Touch Response is turned off. Sound volume is fixed, regardless of key press speed. Normal Touch Response More sensitive Touch Response than Type 1
The playability of an acoustic piano
Your Digital Keyboard provides you with key touch that is the next best thing to an acoustic piano. Note volume changes automatically in accordance with key press speed.

Type 1 (1) Type 2 (2)

Indicator disappears when Touch Response is turned off. Pressing fast produces louder notes.
Adjusting Display Contrast
Pressing slowly produces softer notes.

and [6] ( E-6).

) keys to display OTHER (page
Do not try to use too much pressure.

Flashes

2. Press br (10-key) [7] (ENTER) key. 3. Use the br (10-key) [4] (
to display Contrast. ) and [6] ( ) keys

Con t r a s t

4. Use the br (10-key) [] and [+] keys to adjust the

contrast.

The contrast setting range is 01 to 17.

Using the Metronome

The metronome lets you play and practice along with a steady beat to help keep you on tempo.
Changing the Metronome Tempo

Use the following procedure to change the tempo of the metronome.

Start/Stop

1. Press bn.
Use y (slower) and t (faster) to change the tempo setting. Holding down either button changes the setting at high speed. Pressing t and y at the same time will initialize the tempo setting in accordance with the currently selected song or rhythm. Pressing bn causes the tempo value to flash on the display. While the tempo value is flashing, you can use br (10-key) to change it. Note that you must input leading zeros, so 89 is input as 089. The tempo value will stop flashing if you do not perform any operation for a short while.

1. Press 6.

This starts the metronome.
This pattern changes with each beat.
2. Press 6 again to stop the metronome.
Changing the Beats Per Measure
You can configure the metronome to use a bell sound for the first beat of each measure of the song you are playing. You can specify 0, or a value from 2 to 6 as the number of beat per measure. When playing a built-in song, the beats per measure setting (which determines when the bell sounds) is configured automatically for the currently selected song.

Tempo value (flashes)

Changing the Metronome Sound Volume
The metronome volume setting is changed automatically with the volume level of the currently selected Auto Accompaniment or song. The metronome volume cannot be adjusted independently. For information about changing the Auto Accompaniment volume, see page E-40. For information about changing the song volume, see page E-28.
1. Hold down 6 until the beats per measure
setting screen appears on the display.
If you do not perform any operation for a few seconds after the beats per measure setting screen appears, the display will return to the screen displayed before you pressed 6.
You cannot adjust the balance between the metronome and note volume during Auto Accompaniment and built-in tune play.
2. Use br (10-key) to enter the number of beats

per measure.

The bell will not sound if you specify 0 for this setting. In this case, all beats are indicated by a click sound. This setting lets you practice with a steady beat, without worrying how many beats there are in each measure.
Controlling the Keyboard Sounds

bpbo bpbo br

Select from a variety of musical instrument sounds
Your Digital Keyboard lets you select tones for a wide variety of musical instrument sounds, including violin, flute, orchestra, and more. Even the same song sound takes on a different feel by changing the instrument type.
3. Try playing something on the keyboard.
The tone of the instrument you selected will sound.
To select an instrument for playing

1. Press bo.

Tone number
Playing with a Piano Tone (Piano Setup)
1. Press bo and bp at the same time.
This selects the grand piano tone.

Tone name

2. Use br (10-key) to select the tone number you
The corresponding tone number and tone name will appear on the screen.
Settings Tone Number Reverb Transpose Touch Response
See the separate Appendix for a complete list of available tones. Use the number buttons to enter the tone number. Specify three digits for the tone number. Example: To select 001, enter 1. When one of the drum sets is selected, each keyboard key is assigned a different percussion sound.
: 001 : 06 : 00 : Off: Returns to initial default On: No change Pedal Effect : SUS Rhythm Number : 161 (CTK-4000), 181 (CTK-5000) Accompaniment : Rhythm part only Local Control : On Drum Assign : Off Split : Off Layer : Off Chorus : Off Octave Shift (Upper) : 0 Auto Harmonize : Off Arppegiator : Off Scale : Equal

Layering Two Tones

You can use the following procedure to layer two different tones (such as piano and strings) so they sound simultaneously when you press a keyboard key.
1. Select the first tone you want to use.
Press bo and then use br (10-key) to select the tone you want. Example: 026 ELEC.PIANO 1 (CTK-5000)
You can use the procedure below to assign different tones to the right range and left range of the keyboard, so it sounds like you are playing an ensemble between two instruments.
To select the two tones for a split keyboard
1. Select the tone for the right side range (page

E-12).

Press bo and then use br (10-key) to select the tone you want. Example: 335 FLUTE 1 (CTK-5000)

E.Pi ano1

2. Press cp.

Flute 1

2. Press co.

Lights

3. Use br (10-key) to select the second tone you
Example: 212 STRINGS (CTK-5000)
3. Use br (10-key) to select the left side range tone

St r i ngs

4. Play something on the keyboard.
Both tones sound at the same time.

you want.

Example: 056 VIBRAPHONE 1 (CTK-5000)
5. Pressing cp again to unlayer the keyboard (so it
plays only the tone you selected in step 1).
Each press of cp toggles between layered (two tones) and unlayered (one tone).

Vi bes 1

This will sound the tones assigned to the left and right side ranges of the keyboard.
VIBRAPHONE 1 Split point FLUTE 1

Disappears F3

Splitting the Keyboard between Two Different Tones

Oc t Lowe r

4. Press cp again.
to display Bend Rng. ) and [6] ( ) keys

Bend Rng

4. Use the br (10-key) [] and [+] keys to change

the range.

Sampling Sounds and Playing Them on the Digital Keyboard

1 bpbo bpbo br

bsbt ckcl bs btck cl cm cn
You can use the Digital Keyboard to sample a sound from a portable audio player, or other device, and then play the sound with keyboard keys. For example, you could sample the bark of your dog and then use the sound in a melody. You also can sample and use passages from a CD. The sampling feature is a great way to create new sounds that are highly creative.
2. Turn down the volume levels of the external
device and the Digital Keyboard.
3. Turn on the external device and then the Digital

Keyboard.

Connection and Preparation
Turn off the external device and the Digital Keyboard before connecting them.
Sampled sounds are recorded in monaural.
1. Connect an external device to the Digital

Stereo mini plug

CD player, Cassette player, etc.
Digital Keyboard AUDIO IN jack
Connection requires commercially available connecting cords, supplied by you. Connecting cords should have a stereo mini plug on one end and a plug that matches the configuration of the external device on the other end.
Sampling and Playing a Melody Sound (Melody Sampling)
Use the procedures in this section to sample a sound and play it as the melody part on the Digital Keyboard. Up to five sampled sounds can be stored in Digital Keyboard memory as tone numbers 671 through 675 (CTK4000: 571 through 575). Simply select the tone number where the sound you want is located to assign the sound to the keyboard.
4. After the sound you want to sample is finished, press cr.
Sampling will stop when you release cr. Even if you do not press cr, sampling will stop automatically whenever there is no more sound being input from the external device. Sampling also will stop automatically 10 seconds after it is started.

Sampled sound 1

To sample a sound
1. Press bo and then use br (10-key) to enter the
tone number (CTK-5000: 671 to 675) (CTK-4000: 571 to 575) where you want to store the sampled sound.

S1 :Or

Used memory (Unit: Kbytes) Remaining memory capacity
5. Play something on the Digital Keyboard.
You may not be able to get 10 seconds of sampling if Digital Keyboard memory is low due to storage of other data. If this happens, deleting other memory data you no longer need will free up memory space and you should be able to sample for 10 seconds. See Deleting a Sampled Sound on page E-23 for more information.

tone number (CTK-5000: 671 to 675) (CTK-4000: 571 to 575) to which you want to apply effects.
2. Press bo to cycle thorough the available
effects, described below.
Effect Type (Display) Original (Orgnl) Loop 1 (Loop1) Loop 2 (Loop2) Description Normal sampled tone (no looping, no effect). Loops the sampled sound. Loops the sample sound and raises the pitch of the resonating sound when the keyboard key is released. Loops the sample sound and lowers the pitch of the resonating sound when the keyboard key is released. Changes the pitch from low to high, at an increasing rate. Changes the pitch from high to low, at a decreasing rate. Changes the pitch from high to low, at a decreasing rate, and then raises the pitch when the key is released.

1. Press bp.

bp lights.
2. Press bo and then use br (10-key) to enter the
tone number (CTK-5000: 676, 677, or 678) (CTK-4000: 576, 577, or 578) for the drum set whose sounds you want to change.

Loop 3 (Loop3)

Pitch 1 (Ptch1) Pitch 2 (Ptch2)
In place of the above steps, you could press cr and bp at the same times and then select a tone number.

Pitch 3 (Ptch3)

3. Press cr.
Tremolo (Treml) Alternates volume between high and low. Funny 1 (Funy1) Funny 2 (Funy2) Funny 3 (Funy3) Adds vibrato and changes the pitch by a gradually increasing amount. Alternates between high pitch and low pitch. Adds vibrato and changes the pitch from low to high.
4. Press the keyboard key to which you want to
assign the drum sound you are about to sample.
This enters sampling standby. The allowable sampling time (in seconds) will appear on the display momentarily and then the display will change to the following.
Avoid assigning the same sampled sound to the keyboard for play along and for looped play. Doing so will cause, the Loop 1 effect to be applied to the keyboard tone while looped play of the sampled sound is being performed.
5. Output the sound from the external device.
Editing Sampled Drum Set Sounds
You can use the procedures in this section to copy the drum sound assigned to one keyboard key to another key, to change the pitch of a sound, and to delete a sampled sound.
tone number (CTK-5000: 676, 677, or 678) (CTK4000: 576, 577, or 578) for the drum set you want.
6. After the sound you want to sample is finished, press cr.
2. Press cr. 3. Press cs.

Smp l D r m1

Remaining memory capacity

Flashes at high speed

7. Press the keyboard key.

3. To stop demo playback, press bl.
Demo playback continues until you stop it by pressing bl.

Playing the Demo Songs

Use the following procedure to play back built-in songs.
1. Press bl and bm at the same time.
This will start playback of the demo songs. See page E-75 for information about song numbers and the song sequence. Demo playback always starts from song number 151.

Flashes Song number

DemoTune

Tune name

Playing Back a Particular Song
Use the procedure below to play back one of the built-in songs. You can play along on the keyboard with song playback.
Pause, Skip Forward, Skip Back
Use the operations in this section to perform pause, skip forward, and skip back operations.

Pause

1. Press bk.
This pauses song playback.

Song number

1. Press bq.
2. Press bk again to resume playback from the
point where you paused it. Skip Forward

Tw i n k l e

1. Press 9.
This skips song playback forward to the next measure. Each press of 9 skips ahead one measure. Holding down 9 skips forward at high speed until you release it. Pressing 9 while song playback is stopped performs lesson function phrase skip forward (page E-30).
2. Use br (10-key) to enter the number of the song
See page E-75 for a complete list of available songs.

3. Press bl.

This starts playback of the song.
Tempo Note Sustain pedal Measure number Beat Measure

Skip Back

1. Press 8.
This skips song playback back to the previous measure. Each press of 8 skips back one measure. Holding down 8 skips back at high speed until you release it. Pressing 8 while song playback is stopped performs lesson function phrase skip back (page E-30).

Key Fingering

4. Press bl again to stop playback.
Song playback will continue (repeat) until you press bl to stop it. You can cancel song repeat by pressing 7 (REPEAT indicator disappears from the display).
Repeating Playback of Specific Measures
You can use the procedure in this section to repeat particular measures for practice playing along until you master it. You can specify the start measure and the end measure of the section you want to play and practice.

Start End

4. Pressing 7 again returns to normal playback.
Changing the song number clears the start measure and end measure of the repeat operation.
These measures are repeated.
Changing Playback Speed (Tempo)
1. Press 7 to temporarily turn off song repeat
(REPEAT disappears from the display).
2. When song playback reaches the measure you want to specify as the start measure, press 7.
This specifies the measure as the start measure.
You can use the following procedure to change the speed (tempo) in order to slow down playback to practice difficult passages, etc.

Right hand practice

From top

Complete

Left hand practice
Selecting the Song, Phrase, and Part You Want to Practice
First, select the song, phrase, and part you want to practice.

Both hand practice

1. Select the song you want to practice (page

E-26).

This will select the first phrase of the song.
* * This indicator (setting) is skipped if you press bm while a lesson is in progress.
4. Hold down bq for about two seconds.
The same tone used for song playback will be assigned to the keyboard (page E-28).

Lessons 1, 2, and 3

Now it is time to start the lessons. First, select the song and part you want to practice.
2. Play notes on the keyboard in accordance with
During this lesson, the display shows the key you need to press next. Voice fingering guide uses a simulate voice to announce which finger you should use.
Lesson 1: Listen to the song.
First, listen to the example a few times to familiarize yourself with what it sounds like.

1. Press bs.

This starts example play.

Flashes Lights

<Lesson 2 Guidance> Master playing the correct note with the correct finger as instructed by the guidance. Practice playing with the correct timing.
2. To stop Lesson 1, press bs or bl.
Lesson 2: Watch how the song is played.
Play the song on the keyboard. During this lesson, the display shows the key you need to press next. Voice fingering guide also uses a simulate voice to announce which finger you should use. Follow the instructions to press the correct keyboard keys and play the notes. Dont worry if you play the wrong note. Song playback will wait until you play the correct note. Take your time and play at your own pace.
Song playback will wait for you to play the correct note. Keyboard key goes from flashing to lit. Note guide sounds the correct note to be played. Voice Fingering Guide tells you what finger to use.
Pressing the correct keyboard key causes song playback to resume and the key for the next note flashes.

1. Press bt.

This starts Lesson 2.
3. To stop Lesson 2, press bt or bl.

Auto Accompaniment Intro

Use the following procedure to play an intro of a few measures.
This starts the intro pattern. Normal pattern play will start when the intro pattern is finished. If you press 9 while an intro pattern is being played, the variation pattern will start when the intro pattern is finished.
Auto Accompaniment Ending
Use the following procedure to play an ending of a few measures.
1. While an Auto Accompaniment is playing, press bk.
This will play the ending pattern and then stop Auto Accompaniment play automatically.
Using Auto Accompaniment Effectively
Auto Accompaniment Fill-in
Use the procedure below to play a fill-in pattern during a performance. A fill-in is a short phrase played where you want to change the mood of a piece. A fill-in pattern can be used to create a link between two melodies or an accent. Normal and variation patterns have their own unique fill-in patterns.
Using Auto Accompaniment Using Synchro Start
Use the following procedure to configure the Digital Keyboard to start Auto Accompaniment play as soon as you press a keyboard key.
Adjusting the Accompaniment Volume
Use the following procedure to adjust the balance between what you are playing on the keyboard and the volume of the Auto Accompaniment.
This enters accompaniment start standby.
) ) keys to display AcompVol (page

AcompVo l

2. Play a chord on the keyboard.
This will start full part accompaniment (normal). Any of the following operations can be performed while in synchro standby to start a non-normal pattern. To start with intro pattern, press 7. To start with variation pattern play, press 9.

accompaniment volume.

Using One-Touch Preset
With One-Touch Preset, the Digital Keyboard automatically configures optimal tone, tempo, and other settings in accordance with the rhythm pattern you select.
Changing Auto Accompaniment Speed (Tempo)
Use the following procedure to change Auto Accompaniment speed to a level that suits you.
1. Hold down bp until the current tone screen
This will automatically apply the One-Touch Preset settings in accordance with the rhythm pattern that is currently selected.
Use y (slower) and t (faster) to change the tempo setting. Holding down either button changes the setting at high speed. Pressing y and t at the same time will initialize the tempo setting in accordance with the currently selected rhythm. While the tempo value is flashing, you also can use br (10-key) to change it. If you do not perform any operation for a few seconds after the tempo setting screen appears, the display will return to the screen displayed before you pressed bn.
This will start accompaniment automatically.

8. Repeat steps 4 through 7 as many times as
necessary to edit the parts you want for the pattern you selected in step 3.
If you change the rhythm number in step 6, the editable contents (1 through 6 in the above table) you last configured in step 7 of this procedure will be overwritten with the settings of the newly selected rhythm.

Part 6 (Chord 3)

5. Press bp.
This will display the rhythm number.
9. Repeat steps 3 through 8 as many times as
necessary to edit the accompaniment patterns you want (intro through ending).
6. Use the br (10-key) [] and [+] keys to select the
rhythm number you want to assign to the instrument part you are editing.
A different rhythm number is assigned for each instrument part. You can play the data of the currently selected rhythm number by pressing bl. All of the eight instrument parts of an intro (I-1 to 8) must have the same rhythm number. If you assign rhythm 003 to I-1, for example, 003 also will be assigned automatically to parts I-2 through I-8. If you then assign rhythm 004 to part I-2, for example, I-1 and all of the other parts also will change to 004. All of the eight parts of an ending (E-1 to E-8) also must have the same rhythm number.

10. Press 5.

This will display a message asking if you want to save the user rhythm.
11-1. Press the br (10-key) [] key to exit without

saving.

This displays the delete confirmation message. Press the br (10-key) [+] key to exit the editing procedure.
Saving User Rhythm Data on an External Device
Maintaining User Rhythm Data in Memory
After you save user rhythm data in memory, it will remain there as long as power is supplied to the keyboard. However, if you disconnect the AC adaptor when there are no batteries loaded, user rhythm data will be deleted. Tips for Maintaining Data Use both batteries and the AC adaptor together. Make sure that batteries with sufficient power are loaded whenever you disconnect the AC adaptor. Connect the AC adaptor to the keyboard and plug it into a power outlet before replacing batteries. Before connecting or disconnecting the AC adaptor or replacing batteries, first press 1 to turn off power.
11-2. Press the br (10-key) [+] key to save the data.
Use br (10-key) [] and [+] keys to select the rhythm number you want to save. You can edit the user rhythm name. Use the br (10key) [4] ( ) and [6] ( ) keys to move the cursor to the character you want to change, and then use [+] and [] to change the character.
12. Press br (10-key) [7] (ENTER) key.

Using Tracks to Record and Mix Parts
To record to Tracks 1 through 6
6. Repeat steps 2 through 5 to record the other

tracks.

1. Record the first part to Track 1.
To record to Track 1, perform steps 1 through 4 under Recording and Playing Back Keyboard Play (page E-48).
7. After you finish recording all of the tracks, press bl.
This will start playback of the recorded tracks. Press bl to stop or restart playback. At this time you can turn off playback of specific tracks using buttons bs to cn. Pressing a key toggles playback of each track on (track number displayed) or off (track number not displayed). If you want to re-record a track, press 4. This will return to step 2 of the above procedure. Only the tracks that are turned on (displayed) above will play as you re-record. Example: Tracks 2 and 3 selected

2. Press 4.

This will enter record standby.
3. Press a button from bt to cn to select the track
number of the next track to which you want to record.
This will enter record standby for the track you selected. Example: Track 2

Flashes Disappears

To delete a recorded track
After step 3 of the above procedure, do hold down 4 (without pressing any keyboard key) until the message Tr.Del? appears on the display. Press [+] (YES) to delete the track, or [] (NO) to cancel the delete operation.
If you want to use a different tone than the one you used in Track 1, press bo and then use br (10-key) to input the tone number.

4. Press bl.

This will start playback of what you recorded up to this point in other tracks and record what you play on the keyboard to the currently selected track. Play the notes you want on the keyboard.
5. To stop recording, press bl.
To play back what you have recorded, press bl again. Each press of bl starts and stops playback.
You can record up to five songs (numbered 1 through 5) in memory. After that, you can select a specific song for playback.
This section explains how to play along and record along with one of the Digital Keyboards built-in songs. The following operations and settings also are recorded along with your keyboard play. Tone number, song number, pedal operation, tempo, reverb, chorus, layer/split settings, pitch bend wheel operation (CTK-5000 only)
A song number will appear in the upper left corner of the display for a few seconds. While it is, use br (10-key) to specify the number of the song you want to record or play back. The song number will disappear if you do not perform any operation. Example: Song 2
There can be only one recording of keyboard play with a built-in song in recorder memory. Making a new recording replaces (deletes) previously recorded data.

2. Insert the SD memory card that contains the
data into the Digital Keyboards card slot.
To cancel data load, press ct again.
You also could use [] and [+]. Display this screen Lod SmplTone Lod UserRhy. Lod UserSong Lod Rec.Song Lod ScaleMem Lod Regist. Lod All Data
To load this data Sampled sound User rhythm User song Recorded song User scale memory Registration data All data

********

Use the following procedure to delete data saved on an SD memory card.
want to delete as described below.
To delete this type of data Sampled sound User rhythm User song Recorded song Do this Select the tone number of the sampled sound. Select the rhythm number of the user rhythm. Select the song number of the user song. Select the song and put the Digital Keyboard in playback standby. Press bp and then 3. Select one of the Digital Keyboards default built in tones, songs.
Pressing [9] (EXIT) will return to the screen that was displayed before you pressed [7] (ENTER).
data (file) you want to load.
7. Press the br (10-key) [7] (ENTER) key.
This will load the data into Digital Keyboard memory.
If there is already data stored in the user area where you are trying to load data, an overwrite confirmation message will appear. Press the br (10-key) [+] (YES) key to overwrite, or [] (NO) or [9] (EXIT) key to cancel.
To cancel data delete, press ct again.
To delete this type of data Sampled sound User rhythm User song Recorded song User scale memory Registration data All data
Display this screen dEL SmplTone dEL UserRhy. dEL UserSong dEL Rec.Song dEL ScaleMem dEL Regist. dEL All Data
Deleting Data from an SD Memory Card
Playing Back Data from an SD Memory Card
You can use the following procedure to play back user song data (page E-59) directly from an SD memory card.
Whenever you copy a file to the SD memory card that you plan to play on the Digital Keyboard, be sure to store the file in the SD memory cards MUSICDAT folder (page E-62).
number of the data (file) you want to delete.
1. Insert the SD memory card that contains the
This will display the delete confirmation screen.

2. Press ct.

This will display the file numbers and song names for the data stored on the display.
3. Use br (10-key) to select the song you want to
8. Press the br (10-key) [+] (YES) key.
To cancel the delete operation, press [] (NO) or [9] (EXIT) in place of [+] (YES).
This will start playback. Each press of bl starts and stops playback.

Local Control

There are times when exchanging data with a computer when you may not want the Digital Keyboard to sound notes you play on its keyboard. The local control setting lets you do just that.
1. Press bm to select the channel setting you want

to turn off.

Each press of bm cycles through settings (1) thorough (4) described below. If you turn off one channel, you can play the cancelled part on the keyboard using the same tone as the channel you turned off. If you turn off both channels (option (3)), what you play on the keyboard sounds using the tone of the navigate (R) channel.
Selected channel indicator appears.
to display Local. ) and [6] ( ) keys

Loca l

4. Use the br (10-key) [] and [+] keys to specify
the local control setting. Navigate (L) Channel Navigate (R) Channel

Accomp Out

Enabling the Accomp Out setting causes Auto Accompaniment data to be sent to the computer.
OnOnSound screen Sound screen Guide Guide
(1) R only displayed (2) L only displayed (3) LR displayed (4) LR nor displayed
to display AcompOut. ) and [6] ( ) keys

Ac ompOu t

4. Use the br (10-key) [] and [+] keys to turn

Accomp Out on or off.

Storing and Loading Digital Keyboard Memory Data
You can transfer sampled sounds, recorded songs, and other data in Digital Keyboard memory to a computer for storage. You also can load standard MIDI file (SMF) data, and Auto Accompaniment data you download from the CASIO website to the Digital Keyboard, which greatly expands the Song Bank songs and Auto Accompaniment patterns available to you. A special Data Manager application is required in order to transfer data to and from the Digital Keyboard.
Since the accompaniment data is for other models, you may experience some abnormalities when playing it on this model.
Maintaining Data in Memory
After you save data in memory, it will remain there as long as power is supplied to the keyboard. However, if you disconnect the AC adaptor when there are no batteries loaded, saved data will be deleted. Tips for Maintaining Data Use both batteries and the AC adaptor together. Make sure that batteries with sufficient power are loaded whenever you disconnect the AC adaptor. Connect the AC adaptor to the keyboard and plug it into a power outlet before replacing batteries. Before connecting or disconnecting the AC adaptor or replacing batteries, first press 1 to turn off power.

 

Tags

5610XI HBH-10 EX-Z5 Ws PRO Marine Gear CN-HW800D Lexmark T622 125 T5 Nikon 2500 VLB 100 Brood WAR Teddy Dvdr70-051 Apollo Dmreh58 Price CDX45 Perfection V10 Daisy DS1 Madden 2005 LP-9800C WD-8030W 21PT134B WM-GX655 Fostex D108 KDL-32D2810 V-1100 KX-FLM672CX Pilots 32PW9618 Psl30 SY-20 GSA-2164D QW-2737 HT-S7200 PC-1245 PS-42C62H Travelmate 4150 DP2700 ST-SE200 Ccradio NAS-E35HD Scanmaker 4850 KDL-32L5000 DR-BT25NX Rdxs24SB Fostex 350 SKS-HT520 Heaven Dopod 585 Silver Evo3 SCH-R210 KDL-46HX900 3574 WPS Dvdr3510V-05 BEE-player Assembly HF-81 System Deskjet 3845 LHX-557 A45-S150 TX-P50s20E DVD-R100E Coolpix L5 Shcc6026 GT-2004 Ixtreme 6003 All-IN-ONE RH7800 Ferrari-3400 Ezxs88W Drive HT-R820THX Autoloader BAR608HGA WD-60738 CLP-930 Fortress U5-332 Cooker Dimension 5150 Philips 107E DFX-5000 30120 Review WM-GX677 Ericsson W302 TC-TX101 S5233S Fryer Bissell 1672 Ndrive V9 General DT-50PY10 RBC30sbsa DE1103 Zoom 80 Kxtc1486B KDC-MP632U IDA-X001 Ultra Zoom

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101