(See page 112 for details.)

2, 3, 4, 5

] (PLAY). ).

2. Press [] (

3. Use [] and [] to display the image you want to delete. 4. Use [] and [] to select Delete.
To exit the image delete operation without deleting anything, select Cancel.
5. Press [SET] to delete the image.

I Button Operations

Button operations are indicated by the button name inside of brackets ([ ]).
This section contains information about things you need to know about and do before trying to use the camera.

About This Manual

This section contains information about the conventions used in this manual.

I On-screen Text

On-screen text is always enclosed by double quotation marks ( ).

I Terminology

The following table defines the terminology used in this manual.
This term as used in this manual: this camera or the camera file memory Means this: The CASIO EX-Z30/EX-Z40 Digital Camera The location where the camera is currently storing images you record (page 46) The NP-40 Rechargeable Lithium Ion Battery The optionally available CASIO BC-30L rapid Charger Unit

I File Memory

The term file memory in this manual is a general term that refers to the location where your camera is currently storing the images you record. File memory can be any one of the following three locations. The cameras built-in Flash memory An SD memory card loaded in the camera A MultiMediaCard loaded in the camera For more information about how the camera stores images, see page 114.
battery optional charger unit

General Guide

The following illustrations show the names of each component, button, and switch on the camera.

I Front

I Back

90 A B

1 Shutter release button 2 Power button 3 Flash 4 Microphone 5 Self-timer lamp 6 Lens
7 Viewfinder 8 Operation lamp 9 [ ] (PLAY mode) 0 [ ] (REC mode) A [MENU] button B Zoom button C Strap ring D [SET] button E [][][][] F [DISP] button G Monitor Screen H Speaker

I Bottom

USB Cradle
Simply placing your CASIO digital camera onto the USB cradle lets you perform the following tasks. Battery charging (page 28) Automatic transfer of images to a computer (page 151) Direct connection to a printer for printing (page 146) Viewing of images using the Photo Stand slideshow feature (page 106).

Zoom indicator
Switching to digital zoom causes the zoom indicator to appear on the monitor screen. The zoom indicator shows the current approximate zoom factor.
Optical Zoom 1X Digital Zoom 3X Current zoom factor 12X
4. Select On, and then press [SET].
Selecting Off disables digital zoom.
6. Compose the image, and then press the
BASIC IMAGE RECORDING IMPORTANT! Digital zoom is disabled whenever the monitor screen is turned off (page 25). Using digital zoom can cause degradation of the recorded image.

Using the Flash

Perform the following steps to select the flash mode you want to use.
1. In the REC mode, press [MENU]. 2. Press [] (
) to select the flash mode.
Each press of [] ( ) cycles through the flash mode settings shown below on the monitor screen.
[ ] ( Flash mode indicator
To do this: Have the flash fire automatically when required (Auto Flash) Turn off the flash (Flash Off) Always fire the flash (Flash On) Fire a pre-flash followed by image recording with flash, reducing the chance of red-eye in the image (Redeye reduction) In this case, the flash fires automatically when required Select this setting: None
I About Red-eye Reduction
Using the flash to record at night or in a dimly lit room can cause red spots inside the eyes of people who are in the image. This is caused when the light from the flash reflects off of the retina of the eye. When red-eye reduction is selected as the flash mode, the camera performs two preflash operations, one designed to cause the irises in the eyes of any people in the image to close, and one for the Auto Focus operation. This is followed by another flash operation for actual recording of the image. IMPORTANT! Note the following important points when using redeye reduction. Red-eye reduction does not work unless the people in the image are looking directly at the camera during the pre-flash. Before pressing the shutter release button, call out to the subjects so they all look at the camera while the pre-flash operation is performed. Red-eye reduction may not work very well if the subjects are located far away from the camera.

3. Record the image.

IMPORTANT! The flash unit of this camera fires a number of times when you record an image. The initial flashes are pre-flashes, which the camera uses to obtain information that it uses for exposure settings. The final flash is for recording. Make sure that you keep the camera still until the shutter releases. Image recording may not be performed if you press the shutter release button while the red operation lamp is flashing.

Creating Your Own BESTSHOT Setup
You can use the procedure below to save the setup of an image you recorded for later recall when you need it again. Recalling a setup you save automatically sets up the camera accordingly.
display the image whose setup you want to register as a BESTSHOT scene.

7. Use [] and [] to

select Save, and then press [SET].
This registers the setup. Now you can use the procedure on page 71 to select your user setup for recording.
3. Use [] and [] to select

and then press [SET].

BESTSHOT,
display Register User Scene.
OTHER RECORDING FUNCTIONS IMPORTANT! BESTSHOT user setups are located in the cameras built-in memory after the built-in sample scenes. When a BESTSHOT user setup is recalled, the monitor screen in step 4 of the procedure on page 71 displays the text Recall User Scene. Note that formatting the built-in memory (page 135) deletes all BESTSHOT user setups. NOTES The following are the settings that are included in a BESTSHOT user setup: focus mode, EV shift value, white balance mode, flash mode, and ISO sensitivity. Note that images recorded with this camera only can be used to create a BESTSHOT user setup. You can have up to 999 BESTSHOT user setups in the cameras built-in memory at one time. You can check the current setup of a scene by displaying the various setting menus. When you register a BESTSHOT user setup, it is automatically assigned a file name using one of the formats shown below, depending on your camera model. EX-Z30: UEZ30nnn.JPE (n = 0 to 9) EX-Z40: UEZ40nnn.JPE (n = 0 to 9)
I To delete a BESTSHOT user setup
4. Use [] and [] to display the user setup you

want to delete.

5. Press [] (
) to delete the user setup.
You can also delete a user setup by using your computer to delete its file in the SCENE folder in the cameras built-in memory (page 163).
Combining Shots of Two People into a Single Image (Coupling Shot)
The Coupling Shot mode lets you record images of two people and combine them into a single image. This makes it possible for you to include yourself in group images, even when there is no one else around to record the image for you. Coupling Shot is available in the BESTSHOT mode (page 71). First Image This is the part of the image that does not include the person who is recording the first image. Combined Images
Second Image Making sure that the background of the image is aligned correctly, record the image of the person who recorded the first image.
4. Use [] and [] to select Coupling Shot,

5. Align the focus frame

on the monitor screen with the subject you want on the left side of the image.
While Coupling Shot is selected, the AF Area (page 63) setting automatically becomes Spot.

7. Next, align the focus

frame with the subject you want in the right side of the image, taking care to align the actual background with the semi-transparent image of the background of the first image, which is shown on the monitor screen.

Semi-transparent image

6. Press the shutter release button to record the

left side of the image.

The focus, exposure, white balance, zoom, and flash settings are fixed for this type of image.
Pressing [MENU] any time after step 5 of the above procedure cancels the first image and returns to step 5.
8. When everything is aligned correctly, record
the right side of the image.
IMPORTANT! Coupling Shot temporarily uses file memory to store data. You may get an error during Coupling Shot recording if there is not enough file memory available to store the required data. If this happens, delete images you no longer need and try again.
Recording a Subject onto an Existing Background Image (Pre-shot)
Pre-shot helps you get the background you want, even if you need to ask someone else to record the image for you. Basically, Pre-shot is a two-step process. 1. You compose the background you want and press the shutter release button, which causes a semi-transparent image of the background to remain on the monitor screen. 2. Ask someone else to record a shot of you against your original background, telling them to compose the image by using the semi-transparent monitor screen image as a guide. The camera stores the image produced by step 2 only. Depending on how the image is actually composed in step 2, its background may not be exactly the same as the one you composed in step 1. Note that Pre-shot is available in the BESTSHOT mode only (page 71).
OTHER RECORDING FUNCTIONS Freeze the background on the monitor screen.
Record the image, using the background on the monitor screen as a guide.
4. Use [] and [] to select Pre-shot, and then
5. Freeze the background on the monitor screen.
Though a semi-transparent image of the background appears on the monitor screen in step 6, the background image is not saved in memory at this time. The focus, exposure, white balance, zoom, and flash settings are fixed for this type of image.

This records the image.

6. Next, align the focus
frame with the subject, composing the subject with the semi-transparent background shown on the monitor screen.

Using the Movie Mode

You can record movies with audio. A single movie can be as long as available memory capacity allows. File Format: AVI AVI format conforms to the Motion JPEG format promoted by the Open DML Group. Image Size: 320 x 240 pixels Movie File Size: Approximately 300KB/second. Maximum Movie Length One Movie: As long as available memory capacity allows

Recording Audio

Adding Audio to a Snapshot
You can add audio to a snapshot after you record it. Image Format: JPEG JPEG is an image format that provides efficient data compression. The file extension of a JPEG file is.JPG. Audio Format: WAVE/ADPCM recording format This is the Windows standard format for audio recording. The file extension of a WAVE/ADPCM file is.WAV. Recording Time: Up to about 30 seconds per image Audio File Size: Approximately 120KB (30-second recording of approximately 4KB per second)
5. Press the shutter release button to start audio

recording.

The green operation lamp flashes as recording is performed. Even if you have the monitor screen turned off (page 25), the monitor screen turns on while you are adding audio to a snapshot.
This enters the Snapshot Audio Mode.

4. Press the shutter

release button to record the image.
After the image is recorded, the camera enters audio recording standby, with the image you just recorded on the monitor screen.
6. Recording stops after about 30 seconds or
when you press the shutter release button.
You can cancel audio recording standby by pressing [MENU].

Recording Your Voice

The Voice Recording Mode provides quick and easy recording of your voice. Audio Format: WAVE/ADPCM recording format This is the Windows standard format for audio recording. The file extension of a WAVE/ADPCM file is.WAV. Recording Time: Approximately 40 minutes with built-in memory Audio File Size: Approximately 120KB (30-second recording of approximately 4KB per second)
4. Press the shutter release button to start voice
The remaining recording time value counts down on the monitor screen and the green operation lamp flashes as recording is performed. Pressing the [DISP] button during voice recording turns off the monitor screen. You can insert index marks while recording by pressing [SET]. See page 111 for information about jumping to an index mark during playback.
5. Recording stops when you press the shutter
release button, when memory becomes full, or when the battery goes dead.
NOTE Holding down [DISP] as you press the power button or [ ] (REC) enters the Voice Recording Mode without extending the lens.

REC Mode Camera Settings

The following are the settings you can make before recording an image using a REC mode. ISO sensitivity Grid on/off Image Review on/off L/R key setting Power on default settings Resetting the camera NOTE You can also configure the settings listed below. See the referenced pages for more information. Size (page 58) Quality (page 60) White Balance (page 69) Digital Zoom (page 52) AF Area (page 63) Auto PF (page 62)
Specifying ISO Sensitivity
You can change the ISO sensitivity setting for better images in places where lighting is dim or when you are using faster shutter speeds. ISO sensitivity is expressed in terms of values that originally indicated the sensitivity to light for photographic film. A larger value indicates higher sensitivity, which is better for recording when available lighting is dim.
1. In the REC mode, press [MENU]. 2. Select the REC tab, select ISO, and then
3. Use [] and [] to select the setting you want
OTHER RECORDING FUNCTIONS EX-Z30
To get this: Automatic sensitivity selection Conforms to ISO 50 Conforms to ISO 100 Conforms to ISO 200 Conforms to ISO 400 Select this setting: Auto ISO 50 ISO 100 ISO 200 ISO 400
IMPORTANT! Under certain conditions, a high shutter speed in combination with a high ISO sensitivity setting can cause digital noise to appear inside of an image. For clean, good-quality images, use the lowest ISO sensitivity setting possible. Using a high ISO sensitivity setting along with the flash to shoot a nearby subject may result in improper illumination of the subject.

EX-Z40

NOTE You can use the key customization feature (page 89) to configure the camera so the ISO sensitivity setting changes whenever you press [] and [] while in the REC mode.
Turning the On-screen Grid On and Off
You can display gridlines on the monitor screen to help you compose images and ensure that the camera is straight when recording.
Turning Image Review On and Off
Image review displays an image on the monitor screen as soon as you record it. Use the following procedure to turn image review on and off.
1. In the REC mode, press [MENU]. 2. Select the REC tab, select Review, and
1. In the REC mode, press [MENU]. 2. Select the REC tab, select Grid, and then
To do this: Display images on the monitor screen for about one second immediately after they are recorded Do not display images immediately after they are recorded

Select this setting: On

To do this: Display the grid Hide the grid Select this setting: On Off
Assigning Functions to the [] and [] Keys
A key customization feature lets you configure the [] and [] keys so they change camera settings whenever they are pressed in the REC mode. After you configure the [] and [] keys, you can change the setting assigned to them without going through the menu screen.

Displaying the 9-image View
The following procedure displays nine images on the monitor screen at the same time.
Example: When there are 20 images in memory, and Image 1 is displayed first
1. In the PLAY mode, press the zoom button
This displays the 9-image screen with the image that was on the monitor screen in step 2 in the center, with a selection boundary around it. is displayed in the 9-image screen to indicate voice recording file images (page 111).
3. Pressing any button besides [], [], [], or
[] displays the full-size version of the image where the selection boundary is located.
When there are nine or fewer images, they are displayed in order with Image 1 in the upper left corner, with the selection boundary around it.
2. Use [], [], [], and [] to move the
selection boundary to the image you want. Pressing [] while the selection boundary is in the right column or [] while it is in the left column scrolls to the next full screen of nine images.
Selecting a Specific Image in the 9image View
Displaying the Calendar Screen
Use the following procedure to display a 1-month calendar. While the calendar is on the display, you can select a date, which displays the first image recorded on that date. This helps to make it easy to find the images you want.
1. Display the 9-image view. 2. Use [], [], [], and
[] to move the selection boundary up, down, left, or right until it is located at the image you want to view.

Selection boundary

1. In the PLAY mode, press [] ( 2. Use [], [], [], and
[] to move the date selection cursor.
Use the procedure under Changing the Date Format on page 129 to specify the date format. The image displayed on the calendar for each date is the first image that was recorded on that date.

3. Pressing any button

besides [], [], [], or [] displays the selected image.
This displays the fullsize version of the image you selected.
Month/Year Date selection cursor
PLAYBACK Pressing [] while the date selection cursor is located anywhere in the top line of the calendar causes the previous month to appear. Pressing [] while the date selection cursor is located anywhere in the bottom line of the calendar causes the next month to appear. To exit the calendar screen, press [MENU] or [DISP]. is displayed in the calendar screen to indicate voice recording file images (page 111). appears in place of the image when the date contains data that cannot be displayed by this camera.

Playing a Slide Show

Slide Show automatically plays back images in sequence at a fixed interval.
1. In the PLAY mode, press [MENU]. 2. Select the PLAY tab, select Slideshow,

To re-record audio

Microphone Keep the microphone on the front of the camera pointed at the subject. Take care that you do not block the microphone with your fingers. Good recording results are not possible when the camera is too far from the subject. Operating camera buttons during recording can cause button noise to be included in the audio. The (Audio) icon appears on the monitor screen after audio recording is complete. You will not be able to record audio when remaining memory capacity is low. The following types of audio recording are not supported. Adding audio to a movie image Adding audio to a protected snapshot (page 115) Audio that is re-recorded or deleted cannot be recovered. Make sure you no longer need audio before re-recording or deleting it.
through snapshots until the one whose audio you want to re-record is displayed.
2. Select the PLAY tab, select Dubbing, and
3. Use [] and [] to select Delete, and then
If you merely want to delete the audio with rerecording, press [MENU] here to complete the procedure.
This deletes the previous recording and replaces it with a new one.
Playing Back a Voice Recording File
Perform the following steps to play back a voice recording file.
IMPORTANT! Audio volume can be adjusted only when playback is being performed or is paused. If your recording has index marks (page 83) inside it, you can jump to the index mark before or after the current playback location by pausing playback and then pressing [] or []. Next, press [SET] to resume playback from the index mark position.
the voice file (a file with play. on it) you want to
This starts playback of the voice recording file through the cameras speaker. You can perform the following operations while audio is playing.
To do this: Fast forward or fast reverse the audio Pause and unpause audio playback Adjust audio volume Cancel playback
Do this: Hold down [] or []. Press [SET]. Press [] or []. Press [MENU].

Deleting a Single File

Perform the following steps when you want to delete a single file.
You can delete a single file, or you can delete all files currently in memory. IMPORTANT! Note that file deletion cannot be undone. Once you delete a file, it is gone. Make sure you really do not need a file anymore before you delete it. Especially when deleting all files, make sure you check all the files you have stored before proceeding. A protected file cannot be deleted. To delete a protected file, unprotect it first (page 115). Delete cannot be performed when all the files in memory are protected (page 116). Deleting an audio snapshot deletes both the image file and the audio file attached to it.

press [] ( ).

2. Use [] and [] to scroll through files and
display the one you want to delete.
3. Use [] and [] to select Delete.
To exit the file delete operation without deleting anything, select Cancel.
4. Press [SET] to delete the file.
Repeat steps 2 through 4 to delete other files, if you want.
5. Press [MENU] to exit the menu screen.
DELETING FILES IMPORTANT! If a file cannot be deleted for some reason, the message This function is not supported for this file. appears when you try to delete it.

Deleting All Files

The following procedure deletes all unprotected files currently in memory.
1. In the PLAY mode, press [] (
2. Use [] and [] to select All Files Delete, 3. Use [] and [] to select Yes.
To exit the file delete operation without deleting anything, select No.
4. Press [SET] to delete all the files.
The message There are no files. appears on the screen after all of the files are deleted.
Each folder can hold files numbered up to 9,999. Trying to store the 10,000th file in a folder causes the next serially numbered folder to be created. Folder names are generated as shown below. Example: Name of the 26th file
The file management capabilities of the camera make it easy to keep track of images. You can protect files against deletion and store the files you want in the cameras built-in memory.

4. Use [] and [] to select the file you want to
copy to the FAVORITE folder.
5. Use [] and [] to select Save, and then
This copies the displayed file to the FAVORITE folder.
6. After copying all of the files you want, use []
and [] to select Cancel, and then press [SET] to exit.
To display a file in the FAVORITE folder
NOTE Holding down [] or [] scrolls images at high speed. IMPORTANT! Note that a FAVORITE folder is created in the cameras built-in memory only. No FAVORITE folder is created on a memory card when you use one. If you want to view the contents of the FAVORITE folder on your computer screen, you need to remove the memory card from the camera (if you are using one) before placing the camera onto the USB cradle to start data communication (pages 151, 157).
1. In the PLAY mode, press [MENU]. 2. Select the PLAY tab, select Favorites, and
3. Use [] and [] to select Show, and then
If the FAVORITE folder is empty, the message No Favorites file! appears.

4. Use [] (forward) and

[] (back) to scroll through the files in the FAVORITE folder.

File Name

5. After you are finished viewing files, press

[MENU] twice to exit.

To delete a file from the FAVORITE folder
IMPORTANT! You cannot use the delete operations on page 112 to delete images from the FAVORITE folder. Performing the memory format operation (page 135), however, does delete FAVORITE folder files.

4. Press [] (

5. Use [] and [] to select the file you want to
delete from the FAVORITE folder.
6. Use [] and [] to select Delete, and then
7. After deleting all of the files you want, use []
To delete all files from the FAVORITE folder
5. Use [] and [] to select All Files Delete,
4. Use [] and [] to change the setting, and
To do this: Select a built-in sound Turn off the sound Select this setting: Sound 1 through Sound 5 Off
Configuring Sound Settings
You can configure different sounds to play whenever you turn on the camera, press the shutter release button halfway or all the way, or perform a key operation.
To configure sound settings
NOTE The default sound setting for all operations is Sound 1.
2. Select the Set Up tab, select Sounds, and
select the sound whose setting you want to configure, and then press [].

To set the volume level

Specifying an Image for the Startup Screen
You can specify an image you recorded as the startup screen image, which causes it to appear on the monitor screen for about two seconds whenever you press the ] (REC) to turn on the camera. The power button or [ startup screen image does not appear if you press [ ] (PLAY) to turn on the camera.

The letters DPOF stand for Digital Print Order Format, which is a format for recording on a memory card or other medium which digital camera images should be printed and how many copies of the image should be printed. Then you can print on a DPOF-compatible printer or at a professional print service in accordance with the file name and number of copies settings recorded on the card. With this camera, you should always select images by viewing them on the monitor screen. Do not specify images by file name without viewing the file contents. I DPOF Settings File Name, number of copies, date
To configure print settings for a single image
5. Use [] and [] to specify the number of

copies.

You can specify up to 99 for the number of copies. Specify 00 if you do not want to have the image printed.
select DPOF, and then press [].
6. To turn on date stamping for the prints, press

[DISP] so

is displayed.
indicates that date stamping is turned on.
To turn off date stamping for the prints, press [DISP] is not displayed. so
3. Use [] and [] to select Select images,
Repeat steps 4 through 6 if you want to configure other images for printing.
press [SET] to apply them.
display the image you want.
To configure print settings for all images
5. To turn on date stamping for the prints, press
1. In the PLAY mode, press [MENU]. 2. Select the PLAY tab, select DPOF, and
To turn off date stamping for the prints, press [DISP] so is not displayed.
3. Use [] and [] to select All images, and
6. After all the settings are the way you want,
IMPORTANT! If you take a memory card to a professional print service, be sure to tell them that it includes DPOF settings for the images to be printed and the number of copies. If you dont, they may print all images on the card, including the ones you do not want printed. Note that some professional print services do not support DPOF printing. Check with your service before ordering prints. Some printers may have settings that disable date stamp and/or DPOF printing. See the user documentation that comes with your printer for details about how to enable these features.
specify the number of copies.
Using PictBridge or USB DIRECT-PRINT
You can connect the camera directly to a printer that supports PictBridge or USB DIRECT-PRINT, and perform image selection and printing using the camera monitor screen and controls. DPOF support (page 143) also lets you specify which images you want to print and how many copies of each should be printed. PictBridge is a standard established by the Camera and Imaging Products Association (CIPA). USB DIRECT-PRINT is a standard proposed by Seiko Epson Corporation.

13. On your computer, double-click My

Computer.

If you are running Windows XP, click [Start] and then [My Computer].
14. Double-click Removable Disk.
Your computer sees the cameras file memory as a removable disk.
15. Double-click the Dcim folder. 16. Double-click the folder that contains the

image you want.

17. Double-click the file that contains the image

you want to view.

For information about file names, see Memory Directory Structure on page 163.
18. Depending on your operating system, perform

[USB] button [USB] lamp

one of the following procedures to save the files, if you want.
VIEWING IMAGES ON A COMPUTER I Windows 98, 2000, Me 1. In the cameras file memory (Removable Disk), rightclick the Dcim folder. 2. On the shortcut menu that appears, click [Copy]. 3. Double click [My Documents] to open it. 4. On the My Documents [Edit] menu, click [Paste]. This copies the Dcim folder (which contains the image files) to your My Documents folder. I Windows XP 1. In the cameras file memory (Removable Disk), rightclick the Dcim folder. 2. On the shortcut menu that appears, click [Copy]. 3. Click [Start] and then [My Documents]. 4. On the My Documents [Edit] menu, click [Paste]. This copies the Dcim folder (which contains the image files) to your My Documents folder. IMPORTANT! Never use your computer to edit, delete, move, or rename images stored in file memory. Doing so can cause problems with the image management data used by the camera, which may make it impossible to display images on the camera or it may cause a large error in the number of images value displayed by the camera. Always copy images to your computer memory before performing any edit, delete, move, or rename operation.
19. Depending on the version of Windows you are
running, use one of the following procedures to terminate the USB connection.
I Windows Me/98/XP Users After pressing the USB cradles [USB] button and making sure that the [USB] lamp is not lit, remove the camera from the USB cradle. I Windows 2000 Users Click card services in the task tray on your computer screen, and disable the drive number assigned to the camera. After pressing the USB cradles [USB] button and making sure that the [USB] lamp is not lit, remove the camera from the USB cradle.

IMPORTANT! You need to have Adobe Acrobat Reader installed on your computer to read user documentation files. If you do not already have Adobe Acrobat Reader installed, you can install it from the bundled CDROM.
2. Follow the instructions that appear on your

computer screen.

IMPORTANT! Be sure to follow the instructions carefully and completely. If you make a mistake when installing Photo Loader, you may not be able to browse your existing library information and HTML files that are created automatically by Photo Loader. In some cases, image files may be lost. When using an operating system other than Windows XP, never connect the camera to your computer without installing the USB driver from the CD-ROM first.

User Registration

You can perform user registration over the Internet. To do so, of course, you need to be able to connect to the Internet with your computer.
Installing Software from the CD-ROM on a Macintosh
Use the procedures in this section to install the software from the bundled CD-ROM (CASIO Digital Camera Software) to your computer.
1. Click the Register button.
This starts up your Web browser and accesses the user registration website. Follow the instructions that appear on your computer screen to register.

Installing Software

Use the following procedures to install the software.
2. After registering, terminate your connection

to the Internet.

Exiting the Menu Application
1. On the menu screen, click Exit to exit the
I To install Photo Loader
To perform the following procedures, you must have Acrobat Reader installed on your Macintosh. You can download the latest version of Adobe Acrobat Reader by visiting the Adobe Systems website.
1. Open the folder named Photo Loader. 2. Open the folder named English, and then
open the file named Important.
3. Open the folder named Installer, and then
open the file named readme.
I To view the camera users guide
4. Follow the instructions in the readme file to

install Photo Loader.

IMPORTANT! If you are upgrading to the new version of Photo Loader from a previous version and you want to use library management data and HTML files created using the old version of Photo Loader, be sure to read the Important file in the Photo Loader folder. Follow the instructions in the file to use your existing library management files. Failure to follow this procedure correctly can result in loss or corruption of your existing files.
1. On the CD-ROM, open the Manual folder. 2. Open the Digital Camera folder, and then
open the folder for the language whose users guide you want to view.
3. Open the file named camera_xx.pdf.

xx is the language code.

Nom de la housse

Rfrence

Appareils Compatibles

Dimensions Maximales

Name of the case

Compatible with

Maximum dimensions

Casio Exilim EX- Z110 Nikon S700 Canon Ixus 750 - 800is 54001 Casio Exilim EX- Z10 Casio Exilim EX- Z120 Canon Digital Ixus II's Canon Digital Ixus 60 Canon Ixus 60 - 75 Canon Powershot A Serie Canon Digital Ixus 75 Canon Digital Ixus 70 Canon Powershort A610 Canon Digital Ixus 850is Canon Ixus 850is - 900ti 54004 Nikon Coolpix S510 Canon Digital Ixus 95is Canon Powershot SD 1100 Is Canon Ixus 860is - 960ti 54005 Canon Digital Ixus 990is Canon Digital Ixus 860is Casio Exilim EX-S10 Casio Exilim EX-S600 Casio Exilim EX-S880 Casio Exilim EX-Z8 Casio Exilim EX-Z50 Casio Exilim S et Z Srie 54501 Casio Exilim EX-Z60 Casio Exilim EX-Z100 Casio Exilim EX-Z200 Casio Exilim EX-Z500 Casio Exilim EX-Z750 Casio Exilim EX-Z1200 Fuji FinePix Z1 Fuji FinePix A600 Fuji FinePix F10 Zoom Fujifilm FinePix F - A - Z 54201 Fuji FinePix F11 Zoom Fuji FinePix F20 Zoom Fuji FinePix F30 Zoom Fuji FinePix F31D HP Photosmart R817 HP Photosmart R927 Samsung S1030 Panasonic Lumix DMC-FX520 HP Photosmart 50201 Panasonic Lumix DMC-FX33 Samsung NV24HD
Canon Digital Ixus 40 Canon Digital Ixus 500 Canon Digital Ixus 430 Canon Digital Ixus 750 Canon Digital Ixus 65 Canon Digital Ixus 85is Canon Digital Ixus 100is Canon Powershot S80 Canon Digital Ixus 900ti Sony Cybershot DSC-W55 Canon Digital Ixus 80is Sony Cybershot DSC-W55 Canon Digital Ixus 960ti Casio Exilim EX-S100 Casio Exilim EX-S660D Casio Exilim EX-Z5 Casio Exilim EX-Z9 Casio Exilim EX-Z30 Casio Exilim EX-Z55 Casio Exilim EX-Z70 Casio Exilim EX-Z850 Casio Exilim EX-Z600 Casio Exilim EX-Z1050 Fuji FinePix Z4 Fuji FinePix A400 Zoom Sony Cybershot DSC-W200 Fuji FinePix A470 Zoom Fuji FinePix Z5FD Fuji FinePix A350 Zoom HP Photosmart R818 HP Photosmart R727 HP Photosmart E327 HP Photosmart R417 HP Photosmart R717 Samsung NV30
Canon Digital Ixus 50 Canon Digital Ixus 700 Canon Digital Ixus 30 Canon Digital Ixus 800is Canon Digital Ixus x 59 x 23 mm Canon Powershort A710 Canon Digital Ixus 90is Sony Cybershot DSC-WXx 60 x 26 mm 104 x 66 x 50 mm 90 x 60 x 30 mm
Canon Digital Ixus 970is Casio Exilim EX-S500 Casio Exilim EX-S770D Casio Exilim EX-Z7 Casio Exilim EX-Z11 Casio Exilim EX-Z40 Casio Exilim EX-Z57 Casio Exilim EX-Z80 Casio Exilim EX-Z1000 Casio Exilim EX-Z700 Casio Exilim EX-Z1080 Fuji FinePix Z3 Fuji FinePix A500 Zoom Sony Cybershot DSC-W300 Fuji FinePix A350 Zoom Fuji FinePix Z2 Fuji FinePix A345 Zoom HP Photosmart M527 HP Photosmart R725 HP Photosmart M525 HP Photosmart E317 HP Photosmart M425 Samsung NV40

100 x 60 x 30 mm

96 x 61 x 25 mm

95 x 62 x 35 mm

100 x 65 x 35 mm
Samsung NV15 Panasonic Lumix DMC-FX500 Panasonic Lumix DMC-FX150 Kodak Easyshare V530 Kodak Easyshare V et Pentax Optio W Sries Kodak Easyshare VKodak EasyShare V1233 Kodak EasyShare V1253 Pentax Pentax Optio Wpi Kodak Easyshare C530 Kodak Easyshare C Sries 54602 Kodak Easyshare C875 Kodak Easyshare C533 Kodak EasyShare V1273 Nikon Coolpix S9 Nikon Coolpix 5600 Nikon Coolpix L2 Nikon Coolpix L4 Nikon Coolpix L12 Nikon S - P - L Sries 53801 Nikon Coolpix P4 Nikon Coolpix S3 Nikon Coolpix S7c Nikon Coolpix S600 Nikon Coolpix S710 Nikon Coolpix S550 Nikon S50 Sries 53802 Sony T900 Nikon Coolpix S640 Nikon Coolpix S51C Olympus Mj 1000 Digital Olympus Mj 53901 Olympus Mj 725 Digital Olympus Mj 800 Panasonic Lumix DMC-FX01 Panasonic Lumix DMC-FS2 Panasonic Lumix DMC-FS20 Panasonic FX et FS Sries 51901 Panasonic Lumix DMC-FX07 Panasonic Lumix DMC-FX3 Panasonic Lumix DMC-FX30 Panasonic Lumix DMC-FS6 Panasonic LX Sries 51902 Panasonic Lumix DMC-FT1 Panasonic Lumix DMC-LX1 Panasonic Lumix DMC-TZ2 Panasonic Lumix DMC-TZ3 Panasonic TZ et LZ Sries 51903 Panasonic Lumix DMC-TZ4 Panasonic Lumix DMC-LX2 Panasonic Lumix DMC-TZ6 Panasonic Lumix DMC-TZ5

Pentax Optio A30 Pentax Optio A20 Pentax Optio E20 Pentax Optio T10 Pentax Optio S60 Pentax Optio S45 Pentax Optio M50 Samsung Digimax V700 Samsung Digimax L55W Samsung NV 3 Samsung NV 4 Samsung ST550 Samsung TL225 Samsung i7 Samsung WB210 Samsung NV 11 Sony Cybershot DSC-W115 Sony Cybershot DSC-N1 Sony Cybershot DSC-T77 Sony Cybershot DSC-T300 Sony Cybershot DSC-W125 Sony Cybershot DSC-W130 Sony Cybershot DSC-W170 Sony Cybershot DSC-T90 Sony Cybershot DSC-W200 Sony Cybershot DSC-W90 Sony Cybershot DSC-T90 Sony Cybershot DSC-T10 Nikon P5100 Canon Powershot G10 Canon Powershot G12 Canon Digital Ixus 110 IS Canon Digital Ixus 960ti Nikon Coolpix S710 Panasonic Lumix DMC-FS12 Panasonic Lumix DMC-FS25 Panasonic Lumix DMC-FX550 Samsung ST550 Sony Cybershot DSC-TX1 Sony Cybershot DSC-T90 Sony T900
Pentax Optio A40 Pentax Optio M40 Pentax Optio M20 Pentax Optio S7 Pentax Optio Svi Pentax Optio S55 Pentax Optio S55 Samsung Digimax V800 Samsung Digimax A503 Samsung NV 10 Samsung i8 Samsung TL34HD Samsung ST500 Samsung NV 100 HD Samsung NV 5 Sony Cybershot DSC-W120 Olympus Mj 1030SW Sony Cybershot DSC-T100 Sony Cybershot DSC-T33 Sony Cybershot DSC-T700 Sony Cybershot DSC-W50 Sony Cybershot DSC-W70 Sony Cybershot DSC-W80 Sony Cybershot DSC-W85 Sony DSC-TX10 Sony Cybershot DSC-T900 Nikon Coolpix S200 Nikon P6000 Canon Powershot G7 Canon Digital Ixus 120 is Canon Digital Ixus 970is Nikon Coolpix S50c Nikon Coolpix S630 Nikon S70 Panasonic Lumix DMC-FX50 Samsung TL34HD Sony Cybershot DSC-W300 Samsung IT100 Samsung TLx 60 x 30 mm Nikon P7000 Olympus X-Z1 Canon Powershot S95 Sony Cybershot DSC-TX9 Canon K/Ixus 1000 HS 115 x 80 x 60 mm 95 x 57 x 24 mm 95 x 56,5 x 23,3 mm 100 x 65 x 30 mm Samsung EX1 Sony DSC-HX5V Sony DSC-HX7V Sony DSC-TXx 57 x 31 mm 95 x 65 x 35 mm

Samsung L et I Sries

100 x 62 x 25 mm

Samsung NV Sries

110 x 60 x 65 mm
Copyright 2005-2011 Innovacases / Norve Saint-Tropez - All other products and brand names may be trademarks of their respective owners