Reviews & Opinions
Independent and trusted. Read before buy Casio FX-500ES!

Casio FX-500ES

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Casio FX-500ES, size: 654 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Casio FX-500ESAbout Casio FX-500ES
Here you can find all about Casio FX-500ES like manual and other informations. For example: .

Casio FX-500ES manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Casio FX-500ES please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Casio FX-500ES photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 3. Page 1 of 1. Average Rating:
naugiedoggie 2:37pm on Saturday, October 9th, 2010 
This is a nice drive for the cash I spent. Product works well so far. Received it before the email came that said it shipped!!
necronom 7:38pm on Saturday, May 8th, 2010 
Bought this drive to replace smaller drive in new Toshiba laptop. It is quick, quiet and no problems. I was so impressed. It seems to work pretty well. When I test it under Linux using the smartctl program. So far it works fine, however I noticed that it is not as quiet as the other disk I had before
wombatclov 4:36pm on Monday, April 26th, 2010 
Somewhat Satisfied After two years, this drive finally went South on me. I wish hard drives were not so short lived. I guess two years is not so bad.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

fx-500ES

User's Guide
http://world.casio.com/edu/

RCA502127-001V01

CASIO Europe GmbH Bornbarch 10, 22848 Norderstedt, Germany

About this Manual

The MATH mark indicates an example that uses Math format, while the LINE mark indicates Linear format. For details about input/output formats, see Specifying the Input/Output Format. Keycap markings indicate what a key inputs or what function it performs. Example: 1, 2, +, -, !, A, etc. Pressing the 1 or S key followed by a second key performs the alternate function of the second key. The alternate function is indicated by the text printed above the key.

Alternate function

Keycap function
The following shows what the different colors of the alternate function key text mean. If key marking text is this color: Yellow Red It means this: Press 1 and then the key to access the applicable function. Press S and then the key to input the applicable variable, constant, or symbol.
The following shows an example of how an alternate function operation is represented in this Users Guide. Example: 1s(sin1)1= Indicates the function that is accessed by the key operation (1s) before it. Note that this is not part of the actual key operation you perform. The following shows an example of how a key operation to select an on-screen menu item is represented in this Users Guide. Example: 1(Setup) Indicates the menu item that is selected by the number key operation (1) before it. Note that this is not part of the actual key operation you perform.
The cursor key is marked with four arrows, indicating direction, as shown in the illustration nearby. In this Users Guide, cursor key operation is indicated as f, c, d, and e.

REPLAY

The displays and illustrations (such as key markings) shown in this Users Guide and the separate Appendix are for illustrative purposes only, and may differ somewhat from the actual items they represent. The contents of this manual are subject to change without notice. In no event shall CASIO Computer Co., Ltd. be liable to anyone for special, collateral, incidental, or consequential damages in connection with or arising out of the purchase or use of this product and items that come with it. Moreover, CASIO Computer Co., Ltd. shall not be liable for any claim of any kind whatsoever by any other party arising out of the use of this product and the items that come with it.
k Using the Separate Appendix
Whenever you see the symbol Appendix in this manual, it means you should refer to the separate Appendix. Example numbers (like <#021>) in this Users Guide refer to the corresponding example number in the Appendix. Specify the angle unit in accordance with the marks in the Appendix: Deg : Specify Degree for the angle unit. Rad : Specify Radian for the angle unit.
Initializing the Calculator
Perform the following procedure when you want to initialize the calculator and return the calculation mode and setup to their initial default settings. Note that this operation also clears all data currently in calculator memory. 19(CLR)3(All)=(Yes) For information about calculation modes and setup settings, see Calculation Modes and Calculator Setup. For information about memory, see Using Calculator Memory.

Safety Precautions

Be sure to read the following safety precautions before using this calculator. Keep this manual handy for later reference.

Caution

This symbol is used to indicate information that can result in personal injury or material damage if ignored.

Battery

After removing the battery from the calculator, put it in a safe place where it will not get into the hands of small children and accidentally swallowed. Keep batteries out of the reach of small children. If accidentally swallowed, consult with a physician immediately. Never charge the battery, try to take the battery apart, or allow the battery to become shorted. Never expose the battery to direct heat or dispose of it by incineration. Improperly using a battery can cause it to leak and damage nearby items, and can create the risk of fire and personal injury. Always make sure that the batterys positive k and negative l ends are facing correctly when you load it into the calculator. Remove the battery if you do not plan to use the calculator for a long time. Use only the type of battery specified for this calculator in this manual.
Disposing of the Calculator
Never dispose of the calculator by burning it. Doing so can cause certain components to suddenly burst, creating the risk of fire and personal injury.

Handling Precautions

Be sure to press the O key before using the calculator for the first time. Even if the calculator is operating normally, replace the battery at least once every two years. A dead battery can leak, causing damage to and malfunction of the calculator. Never leave a dead battery in the calculator. The battery that comes with this unit discharges slightly during shipment and storage. Because of this, it may require replacement sooner than the normal expected battery life. Low battery power can cause memory contents to become corrupted or lost completely. Always keep written records of all important data. Avoid use and storage of the calculator in areas subjected to temperature extremes. Very low temperatures can cause slow display response, total failure of the display, and shortening of battery life. Also avoid leaving the calculator in direct sunlight, near a window, near a heater or anywhere else it might be exposed to very high temperatures. Heat can cause discoloration or deformation of the calculators case, and damage to internal circuitry. Avoid use and storage of the calculator in areas subjected to large amounts of humidity and dust. Take care never to leave the calculator where it might be splashed by water or exposed to large amounts of humidity or dust. Such conditions can damage internal circuitry. Never drop the calculator or otherwise subject it to strong impact. Never twist or bend the calculator. Avoid carrying the calculator in the pocket of your trousers or other tight-fitting clothing where it might be subjected to twisting or bending. Never try to take the calculator apart. Never press the keys of the calculator with a ballpoint pen or other pointed object. Use a soft, dry cloth to clean the exterior of the calculator. If the calculator becomes very dirty, wipe it off with a cloth moistened in a weak solution of water and a mild neutral household detergent. Wring out all excess liquid before wiping the calculator. Never use thinner, benzene or other volatile agents to clean the calculator. Doing so can remove printed markings and can damage the case.

Before Using the Calculator

k Removing the Hard Case

Before using the calculator, slide its hard case downwards to remove it, and then affix the hard case to the back of the calculator as shown in the illustration below.
k Turning Power On and Off
Press O to turn on the calculator. Press 1A(OFF) to turn off the calculator.
k Adjusting Display Contrast
1N(SETUP)c6(]CONT') This displays the contrast adjustment screen. Use d and e to adjust display contrast. After the setting is the way you want, press A.
You can also adjust contrast using d and e while the mode menu (which appears when you press N) is on the display.

Important!

If adjusting display contrast does not improve display readability, it probably means that battery power is low. Replace the battery.

k About the Display

Your calculator has a 31-dot 96-dot LCD screen. Example:
Input expression Calculation result

k Display Indicators

Sample Display: This indicator:

S STAT

Means this: The keypad has been shifted by pressing the 1 key. The keypad will unshift and this indicator will disappear when you press a key. The alpha input mode has been entered by pressing the S key. The alpha input mode will be exited and this indicator will disappear when you press a key. There is a value stored in independent memory. The calculator is standing by for input of a variable name to assign a value to the variable. This indicator appears after you press 1t(STO). The calculator is standing by for input of a variable name to recall the variables value. This indicator appears after you press t. The calculator is in the STAT Mode. The default angle unit is degrees. The default angle unit is radians. The default angle unit is grads. A fixed number of decimal places is in effect. A fixed number of significant digits is in effect. Math style is selected as the input/output format. Calculation history memory data is available and can be replayed, or there is more data above/below the current screen. The display currently shows an intermediate result of a multi-statement calculation.
RCL STAT 9 FIX SCI Math $`
For a very complex calculation or some other type of calculation that takes a long time to execute, the display may show only the above indicators (without any value) while it performs the calculation internally.

Final Closed Parenthesis

You can omit one or more closed parentheses that come at the end of a calculation, immediately before the = key is pressed. For details, see Omitting a Final Closed Parenthesis.
Displaying a Long Expression
The display can show up to 14 characters at a time. Inputting the 15th character causes the expression to shift to the left. At this time, the ] indicator appears to the left of the expression, indicating that it runs off the left side of the screen. Input expression: 1111 + 2222 + 3333 + 444

Displayed portion:

Cursor
When the ] indicator is displayed, you can scroll left and view the hidden part by pressing the d key. This will cause the ' indicator to appear to the right of the expression. At this time, you can use the e key to scroll back.
Number of Input Characters (Bytes)
You can input up to 99 bytes of data for a single expression. Basically, each key operation uses up one byte. A function that requires two key operations to input (like 1s(sin1)) also uses only one byte. Note, however, that when you are inputting functions with Math format, each item you input uses up more than one byte. For more information, see Inputting with Math Format.
Normally the input cursor appears as a straight vertical (I) or horizontal ( ) flashing line on the display screen. When there are 10 or fewer bytes of input remaining in the current expression, the cursor changes shape to I to let you know. If the I cursor appears, terminate the expression at a convenient point and calculate the result.
k Correcting an Expression
This section explains how to correct an expression as you are inputting it. The procedure you should use depends on whether you have insert or overwrite selected as the input mode.
About the Insert and Overwrite Input Modes
With the insert mode, the displayed characters shift to the left to make room when you input a new character. With the overwrite mode, any new character you input replaces the character at the current cursor position. The initial default input mode is insert. You can change to the overwrite mode when you need it. The cursor is a vertical flashing line (I) when the insert mode is selected. The cursor is a horizontal flashing line ( ) when the overwrite mode is selected. The initial default for Linear format input is the insert mode. You can switch to the overwrite mode by pressing 1Y(INS). With Math format, you can only use the insert mode. Pressing 1Y(INS) when the Math format is selected does not switch to the overwrite mode. See Incorporating a Value into a Function for more information. The calculator automatically changes to the insert mode whenever you change the input/output format from Linear to Math.
Changing the Character or Function You Just Input

Example: To correct the expression so it becomes LINE 369*13 Y 2
Deleting a Character or Function
Example: To correct the expression 369 12 so it becomes LINE Insert Mode: 369**12 dd Y Overwrite Mode: 369**12

Correcting a Calculation

Example: To correct cos(60) so it becomes sin(60) LINE Insert Mode: c60) dddY s Overwrite Mode: c60) dddd s
Inserting Input into a Calculation
Always use the insert mode for this operation. Use d or e to move the cursor to the location where you want to insert new input, and then input what you want.
k Displaying the Location of an Error
If an error message (like Math ERROR or Syntax ERROR) appears when you press =, press d or e. This will display the part of the calculation where the error occurred, with the cursor positioned at the error location. You can then make necessary corrections. Example: When you input 2 = by mistake instead of 2 = Use the insert mode for the following operation. LINE 14/0*2=

Press e or d.

This is causing the error.
You can also exit the error screen by pressing A, which clears the calculation.
k Inputting with Math Format
When inputting with Math format, you can input and display fractions and some functions using the same format as they appear in your textbook.
Certain types of expressions can cause the height of a calculation formula to be greater than one display line. The maximum allowable height of a calculation formula is two display screens (31 dots 2). Further input will become impossible if the height of the calculation you are inputting exceeds the allowable limit. Nesting of functions and parentheses is allowed. Further input will become impossible if you nest too many functions and/or parentheses. If this happens, divide the calculation into multiple parts and calculate each part separately.
Functions and Symbols Supported for Math Format Input
The Bytes column shows the number of bytes of memory that are used up by input. Function/Symbol Improper Fraction Mixed Fraction log(a,b) (Logarithm) 10^x (Power of 10) e^x (Power of e) Square Root Cube Root Square, Cube Reciprocal Power Power Root Absolute Value Parentheses Key Operation ' 1'(() & 1l($) 1i(%) ! 1!(#) w, W E 6 16(") D ( or ) Bytes 1
Math Format Input Examples
The following operations are all performed while Math format is selected. Pay close attention to the location and size of the cursor on the display when you input using Math format. Example 1: To input 23 + 1 MATH
e+1 Example 2: To input 1 + ' + MATH
Example 3: To input (1 + 2 )= 5 MATH (1+'2c5e) w*2=
When you press = and obtain a calculation result using Math format, part of the expression you input can be cut off as shown in the Example 3 screen shot. If you need to view the entire input expression again, press A and then press e.
Incorporating a Value into a Function

x < x < 20 x < 10000
Calculation results may be displayed in decimal form for input values outside of the above ranges.
k ' Form Calculation Range
Results that include square root symbols can have up to two terms (an integer term is also counted as a term). ' form calculation results use display formats like those shown below.
b e a', d a', a' d' b b c f
The following shows the range for each of the coefficients (a, b, c, d,

e, f ).

1 < a < 100, 1 < b < 1000, 1 < c < < d < 100, 0 < e < 1000, 1 < f < 100

Example:

2' 4 = 8' 35' 3 = 148.(= 105' 2) 150' 2 = 8.2 (3 2' ) = 6 4' 23 (5 2' ) = 35.(= 115 46' ) 3 10' + 15 3' = 45' + 10' 15 (10' + 3' ) = 290.3 (= 45' + 150' ) ' + ' + ' = ' + 3' 2 ' + ' + ' = 5.3 6

' form decimal form

' form decimal form ' form decimal form ' form decimal form
The underlined areas in the above examples indicate what caused decimal form to be used. Reasons why the results of the examples are displayed in decimal form - Value outside of the allowable range - More than two terms in the calculation result Calculation results displayed in ' form are reduced to a common denominator.
a' + d' a' + d' b e b e c f c
c is the least common multiple of c and f. Since calculation results are reduced to a common denominator, they are displayed in ' form even if coefficients (a, c, and d) are outside the corresponding ranges of coefficients (a, c, and d). ' ' 10' + 11' + = Example: 110 The result is displayed in decimal form even when any intermediate result has three or more terms. Example: (1 + ' + ' )(1 ' ' )(= 4 2' ) 6 = 8.898979486 If a term is encountered during the calculation cannot be displayed as a root (') form or a fraction, the calculation result is displayed in decimal form. Example: log3 + ' = 1.891334817 2

Basic Calculations

(COMP)
This section explains how to perform arithmetic, fraction, percent, and sexagesimal calculations. All calculations in this section are performed in the COMP Mode (N1).
k Arithmetic Calculations
Use the +, -, *, and / keys to perform arithmetic calculations. Example: = 36 LINE 7*8-4*5=
The calculator automatically judges the calculation priority sequence. For more information, see Calculation Priority Sequence.
Number of Decimal Places and Number of Significant Digits
You can specify a fixed number of decimal places and significant digits for the calculation result. Example: = LINE Initial default setting (Norm1)

3 decimal places (Fix3)

3 significant digits (Sci3) For more information, see Specifying the Number of Display Digits.
Omitting a Final Closed Parenthesis
You can omit any closed parenthesis ( ) ) immediately preceding operation of the = key at the end of a calculation. This is true only in the case of Linear format. Example: (2 + 3) (4 1) = 15 LINE (2+3)* (4-1=

k Fraction Calculations

How you should input fractions depends on the input/output format that is currently selected. Improper Fraction Mixed Fraction

('7c3)

(1'(()2e1c3)

Denominator Numerator

Numerator Denominator Integer Part (7'3)

(2'1'3)

Under initial default settings, fractions are displayed as improper fractions. Fraction calculation results are always reduced before being displayed. Appendix 7 <#001> + = <#002> 3 + 1 = 4 (Fraction Display Format: ab/c) 3 = (Fraction Display Format: ab/c) If the total number of digits used for a mixed fraction (including integer, numerator, denominator, and separator symbols) is greater than 10, the value is automatically displayed in decimal format. The result of a calculation that involves both fraction and decimal values is displayed in decimal format.
Switching between Improper Fraction and Mixed Fraction Format b d Pressing the 1f( a ) key toggles the display fraction c c
between mixed fraction and improper fraction format.
Switching between Fraction and Decimal Format f
The format of the fraction depends on the currently selected fraction display format setting (improper fraction or mixed fraction). You cannot switch from decimal format to mixed fraction format if the total number of digits used in the mixed fraction (including integer, numerator, denominator, and separator symbols) is greater than 10. For details about the f key, see Using S-D Transformation.

k Percent Calculations

Inputting a value and pressing 1((%) causes the input value to become a percent. Appendix 2 () <#004> 150 20% = 30 (150 ) 100 <#003> 2% = 0.02 <#005> <#006> <#007> <#008> <#009> Calculate what percentage of 880 is 660. (75%) Increase 2500 by 15%. (2875) Discount 3500 by 25%. (2625) Discount the sum of 168, 98, and 734 by 20%. (800) If 300 grams are added to a test sample originally weighing 500 grams, what is the percentage increase in weight? (160%) <#010> What is the percentage change when a value is increased from 40 to 46? How about to 48? (15%, 20%)
k Degree, Minute, Second (Sexagesimal) Calculations
You can perform calculations using sexagesimal values, and convert values between sexagesimal and decimal.
Inputting Sexagesimal Values
The following is the syntax for inputting a sexagesimal value. {Degrees}e{Minutes}e{Seconds}e Appendix <#011> Input 2030.

k Power Functions and Power Root Functions
X2, X3, X1, X^, '(, 3'(, ^'( ' Appendix <#024> to <#028>
k Rectangular-Polar Coordinate Conversion
Rectangular Coordinates (Rec)

Polar Coordinates (Pol)

Coordinate conversion can be performed in the COMP and STAT calculation modes. Converting to Polar Coordinates (Pol) Pol(X, Y) X: Specifies the rectangular coordinate X value Y: Specifies the rectangular coordinate Y value Calculation result is displayed in the range of 180 < < 180. Calculation result is displayed using the calculators default angle unit. Calculation result r is assigned to variable X, while is assigned to Y. Converting to Rectangular Coordinates (Rec) Rec(r,) r : Specifies r value of polar coordinate : Specifies value of polar coordinate Input value is treated as an angle value, in accordance with the calculators default angle unit setting. Calculation result x is assigned to variable X, while y is assigned to Y. If you perform coordinate conversion inside of an expression instead of a stand-alone operation, the calculation is performed using only the first value (either the r-value or the X-value) produced by the conversion. Example: Pol (' ' + 5 = 2 + 5 = 7 2, 2) Appendix <#029> to <#030>

k Other Functions

This section explains how to use the functions shown below. !, Abs(, Ran#, nPr, nCr, Rnd(

Factorial (!)

This function obtains the factorials of a value that is zero or a positive integer. Appendix <#031> (5 + 3)! = 40320
Absolute Value Calculation (Abs)
When you are performing a real number calculation, this function simply obtains the absolute value. Appendix <#032> Abs (2 7) = 5

Random Number (Ran#)

This function generates a 3-digit pseudo random number that is less than 1. Appendix <#033> Generate three 3-digit random numbers. The random 3 digit decimal values are converted to 3-digit integer values by multiplying by 1000. Note that the values shown here are examples only. Values actually generated by your calculator will be different.

STAT Editor Screen Input Precautions
The number of lines in STAT editor screen (the number of sample data values you can input) depends on the type of statistical data you selected, and on the Statistical Display setting of the calculators setup screen.
Statistical Display Statistic Type Single-variable Paired-variable
OFF (No FREQ column) 80 lines 40 lines
ON (FREQ column) 40 lines 26 lines
The following types of input are not allowed on the STAT editor screen. m, 1m(M) operations Assignment to variables (STO)
Precautions Concerning Sample Data Storage
Sample data you input is deleted automatically whenever you change to another mode from the STAT Mode or change the Statistical Display setting (which causes the FREQ column to be shown or hidden) on the calculators setup screen.

Editing Sample Data

Replacing the Data in a Cell (1) On the STAT editor screen, move the cursor to the cell you want to edit. (2) Input the new data value or expression, and then press =.
Note that you must totally replace the existing data of the cell with new input. You cannot edit parts of the existing data. Deleting a Line (1) On the STAT editor screen, move the cursor to the line you want to delete. (2) Press Y.
Inserting a Line (1) On the STAT editor screen, move the cursor to the line that will be under the line you will insert. (2) Press 11(STAT)3(Edit). (3) Press 1(Ins).
Note that the insert operation will not work if the maximum number of lines allowed for the STAT editor screen are already used. Deleting All STAT Editor Contents (1) Press 11(STAT)3(Edit). (2) Press 2(Del-A). This clears all of the sample data on the STAT editor screen.
Note that you can perform the procedures under Inserting a Line and Deleting All STAT Editor Contents only when the STAT editor screen is on the display.
k STAT Calculation Screen
The STAT calculation screen is for performing statistical calculations with the data you input with the STAT editor screen. Pressing the A key while the STAT editor screen is displayed switches to the STAT calculation screen. The STAT calculation screen also uses Linear format, regardless of the current input/output format setting on the calculators setup screen.

k Using the STAT Menu

While the STAT editor screen or STAT calculation screen is on the display, press 11(STAT) to display the STAT menu. The content to the STAT menu depends on whether the currently selected statistical operation type uses a single variable or paired variables.

STAT Menu Items

Common Items Select this menu item: 1Type 2Data 3Edit 4Sum 5Var 6MinMax When you want to do this: Display the statistical calculation type selection screen Display the STAT editor screen Display the Edit sub-menu for editing STAT editor screen contents Display the Sum sub-menu of commands for calculating sums Display the Var sub-menu of commands for calculating the mean, standard deviation, etc. Display the MinMax sub-menu of commands for obtaining maximum and minimum values
Paired-variable Menu Item Select this menu item: When you want to do this: Display the Reg sub-menu of commands for regression calculations For details see Commands when Linear Regression Calculation (A+BX) Is Selected and Commands when Quadratic Regression Calculation (_+CX2) Is Selected.
Single-variable (1-VAR) Statistical Calculation Commands
The following are the commands that appear on the sub-menus that appear when you select 4(Sum), 5(Var), or 6(MinMax) on the STAT menu while a single-variable statistical calculation type is selected. See Appendix <#039> for information about the calculation formula used for each command. Sum Sub-menu (11(STAT)4(Sum)) Select this menu item: 1x2 2x When you want to obtain this: Sum of squares of the sample data Sum of the sample data
Var Sub-menu (11(STAT)5(Var)) Select this menu item: 1n 2o 3xn 4xn1 When you want to obtain this: Number of samples Mean of the sample data Population standard deviation Sample standard deviation
MinMax Sub-menu (11(STAT)6(MinMax)) Select this menu item: 1minX 2maxX Appendix When you want to obtain this: Minimum value Maximum value Single-variable Statistical Calculation
<#040> Select single-variable (1-VAR) and input the following data: {1, 2, 3, 4, 5, 6, 7, 8, 9, 10} (FREQ: ON) <#041> Edit the data to the following, using insert and delete: {0, 1, 2, 3, 4, 5, 6, 7, 9, 10} (FREQ: ON) <#042> Edit the FREQ data to the following: {1, 2, 1, 2, 2, 2, 3, 4, 2, 1} (FREQ: ON) Examples <#043> through <#045> all use the same data as Example <#042>. <#043> Calculate sum of squares of the sample data and sum of the sample data. <#044> Calculate number of samples, mean, and population standard deviation. <#045> Calculate minimum value and maximum value.

All calculations in this section are performed in the TABLE Mode (N4).
k Configuring a Number Table Generation Function
The procedure below configures the number table generation function with the following settings. 1 Function: f(x) = x2 + 2 Start Value: 1, End Value: 5, Step Value: 1 LINE (1) Press N4(TABLE).

(2) Input the function.

(3) After making sure the function is the way you want, press =. This displays the start value input screen.
Indicates the initial default start value of 1.
If the initial value is not 1, press 1 to specify the initial start value for this example. (4) After specifying the start value, press =. This displays the end value input screen.
Indicates the initial default end value of 5.
Specify the end value. (5) After specifying the end value, press =. This displays the step value input screen.
Indicates the initial default step value of 1.
Specify the step value. For details about specifying the start, end, and step values, see Start, End, and Step Value Rules. (6) After specifying the step value, press =.
Pressing the A key returns to the function editor screen.
k Supported Function Types
Except for the X variable, other variables (A, B, C, D, Y) and independent memory (M) are all treated as values (the current variable assigned to the variable or stored in independent memory). Only variable X can be used as the variable of a function. The coordinate conversion (Pol, Rec) functions cannot be used for a number table generation function. Note that the number table generation operation causes the contents of variable X to be changed.
k Start, End, and Step Value Rules
Linear format is always used for value input. You can specify either values or calculation expressions (which must produce a numeric result) for Start, End, and Step. Specifying an End value that is less than the Start value causes an error, so the number table is not generated. The specified Start, End, and Step values should produce a maximum of 30 x-values for the number table being generated. Executing a number generation table using a Start, End, and Step value combination that produces more than 30 x-values causes an error.
Certain functions and Start, End, Step value combinations can cause number table generation to take a long time.

k Number Table Screen

The number table screen shows x-values calculated using the specified Start, End, and Step values, as well as the values obtained when each x-value is substituted in the function f(x). Note that you can use the number table screen for viewing values only. Table contents cannot be edited. Pressing the A key returns to the function editor screen.

k TABLE Mode Precautions

Note that changing the input/output format settings (Math format or Linear format) on the calculators setup screen while in the TABLE Mode clears the number table generation function.

Technical Information

k Calculation Priority Sequence
The calculator performs calculations according to a calculation priority sequence. Basically, calculations are performed from left to right. Expressions within parentheses have the highest priority. The following shows the priority sequence for each individual command. 1. Function with parentheses: Pol(, Rec( sin(, cos(, tan(, sin1(, cos1(, tan1(, sinh(, cosh(, tanh(, sinh1(, cosh1(, tanh1( log(, ln(, e^(, 10^(, '(, 3'( Abs( Rnd( 2. Functions preceded by values, powers, power roots: x2, x3, x1, x!, , , r, g, ^(, x'( Percent % 3. Fractions: a b/c

4. 5. 6. 7.

Prefix symbol: () (negative sign) Statistical estimated value calculation: m, n, m1, m2 Permutations, combinations: nPr, nCr Multiplication and division: , Multiplication where sign is omitted: Multiplication sign omitted immediately before , e, variables (2, 5A, A, etc.), functions with parentheses (2'(3), Asin(30), etc.) 8. Addition and subtraction: +,
If a calculation contains a negative value, you may need to enclose the negative value in parentheses. If you want to square the value 2, for example, you need to input: (2)2. This is because x2 is a function preceded by a value (Priority 2, above), whose priority is greater than the negative sign, which is a prefix symbol (Priority 4). Example: y2w= (y2)w= 22 = 4 (2)2 = 4
Multiplication and division, and multiplication where the sign is omitted are the same priority (Priority 7), so these operations are performed from left to right when both types are mixed in the same calculation. Enclosing an operation within parentheses causes it to be performed first, so the use of parentheses can result in different calculation results. Example: 1/215()= 1/(215())= = 1.(2) = 0.1591549431

Removing the battery from the calculator causes independent memory contents and values assigned to variables to be cleared. 1 Press 1A(OFF) to turn off the calculator. 2 On the back of the calculator, remove the screws and the back cover. 3 Remove the old battery. 4 Load a new battery into the calculator with its positive k and negative l ends facing correctly. 5 Replace the back cover and secure it in place with its screws. 6 Perform the following key operation: O19(CLR)3(All)=(Yes). Make sure you perform the above key operation. Do not skip it. Screw Screw

Auto Power Off

Your calculator will turn off automatically if you do not perform any operation for about six minutes. If this happens, press the O key to turn the calculator back on.

Specifications

Power Requirements: AAA-size battery: R03 (UM-4) 1 Battery Life: Approximately 17,000 hours (continuous display of flashing cursor) Power Consumption: 0.0002 W Operating Temperature: 0C to 40C Dimensions: 13.7 (H) 80 (W) 161 (D) mm 9/16 (H) 31/8 (W) 65/16 (D) Approximate Weight: 110 g (3.9 oz) including the battery Bundled Items: Hard Case

CASIO COMPUTER CO., LTD.

6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan

SA0411-A

Printed in China

 

Tags

USA-19H 280820 MP9485SB FE 1205 Manager Complete KP-300 Pentax MZ-S DJ-F1E Jims-190 MP960 Induction HOB Cable Stylus C88 ZI1630 CD1401B 16 NWZ-E355 ZWI1125 MVX350I POA-T10 - E 5 1 FOB481X BM250 Abuw606LTA0 Wixe13 700 RDS CMT-NEZ31 LE37R82B FZ6-C 23 E SPF-71ES Babymonitor VP-D77I UX-A1000 RLH1100mkii-RLH1100mk2 Cerato Tour XTB CS5000 PS-50C96HD 77 Kbse DMR-EH585 Yamaha TMX Alliance PRO A40 M100E256K PN-3200 WA80V3wip XFA PKS 40 4014NV Floor 4X4-2000 Studio S100 DB-90 HC3800 KDL-46XBR9 WD-16NEW 1420 Mp3 VP-D76 DB-60 4D 9 78-8846 LMV1630ST DX7II DEH-2150UB FPF523TCW Photosmart 7850 C200H KX-TG7100E W2242T-PF Trifinder 2 IBM T20 Dragon HM3 Dvnc55 KD-492F MS-6785 M1833N CGL404W LA37R81B JBL L110 BX133 Sabt228 WAP3205 81883 MX3210 Grandprix 2004 S-770 DWL-810 CD-BA3100 Server 2 SPX90II UX-B30 B33 Trinity C-120 Fishfinder 90 Taav561 Systeme 4100 SCE170 K7MRM 5150 III

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101