MA0212-A

USERS GUIDE HS-3(V) HS-6

Minutes
Seconds Minutes 1/100 second Seconds 1/100 second

Hours Hours

SPLIT/LAP indicator
indicates the SPLIT mode.

indicates the LAP mode.

A sticker is affixed to the glass of this stopwatch when you purchase it. Be sure to remove the sticker before using the stopwatch. Depending on the stopwatch model, the configuration of your stopwatch may differ somewhat from that shown in the illustration.

USING THE STOPWATCH

A Press this button to start and stop elapsed time measurement. B Press this button while an elapsed time measurement is in progress to momentarily freeze a SPLIT or LAP time on the display (timing continues internally). Press again to display the ongoing time measurement. You can repeat the LAP/SPLIT time operation as many times you want. Pressing this button while elapsed time measurement is stopped resets the time to all zeros. C Press this button to toggle between the SPLIT time mode and LAP time mode. The maximum elapsed time that can be measured is 9 hours, 59 minutes, 59.99 seconds.

SPLIT timing START 0

(a+b+c)

STOP (t)

SPLIT (a) SPLIT (a+b) Press A in SPLIT mode. Press B to freeze SPLIT time (a). Press B to release. SPLIT (a+b+c) Press B to freeze SPLIT time (a+b). Press B to release.
Press A. Press B to reset.
A SPLIT is the time from the start of an event up to any specific point. A LAP is the time for one segment (lap) of an event.

SPLIT LAP

1st-2nd place times
How to operate the stopwatch
Normal time measurement START 0 Press A. STOP (a) Press A. Press B to reset to zero.

START 0

a b (a)

SPLIT (a)

SPLIT release
Press B when the first runner (a) finishes. Displays time of first runner. Press A when the second runner (b) finishes. Press B to display the time of the second runner. Press B to reset.

Press A in SPLIT mode.

Net times (Accumulated time excluding loss time) START 0

STOP (a) (Lost time)

START (a)
STOP (a+b) Press B to reset to zero.
LAP timing (Lap timing for each segment of an event) START STOP START (a) STOP START (b) STOP

LAP (a)

LAP (b)

LAP (c)

Press A.

Press A in LAP mode.

Press B to freeze LAP time (a). Press B to release.
Press B to freeze LAP time (b). Press B to release.