Reviews & Opinions
Independent and trusted. Read before buy Casio PRG-40!

Casio PRG-40

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Casio PRG-40, size: 553 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Casio PRG-40About Casio PRG-40
Here you can find all about Casio PRG-40 like manual and other informations. For example: review.

Casio PRG-40 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Casio PRG-40 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Casio PRG-40 photo ]

Video review

Casio Pathfinder PAG40 3V watch. Protrek PRG 40 3VER.

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

10.000 10.000 (-32.800 32.800). 3. E B OFF, . 4. A. . 5 , .
. 20. , . , . SIG. AL . . MIN MAX , , . 1. D . 2. E B : Alarm1 Alarm2 Alarm3 Alarm4 Alarm5 Alarm1. 3. A. . . 4. D : . 5. E B . . 12- , , ( P , ). 4. , A . \ 1. E B . 2. C .
, , D. E B . , . . 1. , . 2. A. CLR. 3. , , .

C .

, . 59.99. ) E ( ) E ( ) E ( ) E ( ) B ( ) ) E ( ) B ( ) B ( ) E ( ) B () ) E () B ( . ) E ( . 1- ) B (. 2- ) B ()
2. RECO. . , . , . , . 3. ---. , , , , , . , .
+- 15. , , , / (), , , , . . 2000. 2039. (5 ), . 1/100. 23 59. 59,99. , , . 16 30 ,. 260-1100 (7.65 32.45.) 1 (0.05.). . , , . -10.0 60.0 (14.0 140.0F). 0.1 (0.2F). 3- , 5. , . -700 10.000 (-2.300 32.800 ). -10.000 10.000 ( -32.800 32.800 ). 5 (20 ). 5 3 , 2.
D 3- . . . 1. ERROR. .
( 50 , , , ), , , . +- 10 (14-104F). 0-6000 0-19680 6000- 0-6000 0-19680 6000-+-( 5%+30 (100) +-( 5%+45 (150) +-( 5%+3 (0.0885.) +-( 5%+3 (0.0885.)

: : : :

/ - (./.) CASIO CASIO COMPUTER Co.,Ltd. ( . ) 6-2, Hon-machi 1-chome, Shibuya-ku,Tokyo 151-8543, Japan , 127282, ,.,. .41,. (495) 6428455

: -: : :

+-100 10 +-10 10 +-330 50 F +-0.295. 50F +-150 10 +-10 10 +-500 50 F +- 0.295. 50F +- 2 (+-3.6 F) (14.0- 140.0 F). ( ), ,
26270-98 (.4.35) JP. 46.00003
,. ( SR927W). 18 20. 1.5. 5 12 10 ( )

doc1

2271-2

DIGITAL COMPASS
A built-in bearing sensor detects magnetic north and indicates one of 16 directions on the display. Direction readings are performed in the Digital Compass Mode. You can calibrate the bearing sensor if you suspect the direction reading is incorrect.
Understanding the Barometer/Thermometer Screen
Barometric pressure graph (unit: 1hPa (mb)/0.05 inHg)
To enter and exit the Digital Compass Mode
1. While in the Timekeeping, Barometer/Thermometer, or Altimeter Mode, press B to enter the Digital Compass Mode. At this time, the watch immediately starts a Digital Compass operation. After about two seconds, letters appear on the display to indicate the direction that the 12 oclock position of the watch is pointing. 2. Press D to return to the Timekeeping Mode.
Temperature Barometric pressure
Press C to enter the Barometer/Thermometer Mode. Barometric pressure is displayed in units of 1hPa/mb (or 0.05inHg). Temperature is displayed in units of 0.1C (or 0.2F). The displayed barometric pressure value changes to xxxx hPa/mb (or inHg) if a measured barometric pressure falls outside the range of 260 hPa/mb to 1100 hPa/mb (7.65 inHg to 32.45 inHg). The barometric pressure value will be displayed again as soon as the measured barometric pressure is within the allowable range.
To take a direction reading
1. Enter the Digital Compass Mode. 2. Place the watch on a flat surface or (if you are wearing the watch), make sure that your wrist is horizontal (in relation to the Direction horizon). 3. Point the 12 oclock position of the watch in the direction you want to measure. 4. Press B to start a Digital Compass measurement operation. After about two seconds, the direction that the 12 oclock position of the watch is pointing appears on the display. Timekeeping Mode time Also, four pointers appear to indicate magnetic north, south, east, and west. Direction value (in degrees) After the first reading is obtained, the watch continues to take direction W NW NNW WN 0 N readings automatically each second, for up to 30 seconds. The COMP indicator flashes on the display while a measurement is in progress. The direction value that appears on the display represents the clockwise angle formed between magnetic north (which is 0 degrees) and the displayed direction.

Magnetic north pointer

12 oclock position

W SW WSW

The displayed temperature value changes to xx. x C (or F) if a measured temperature falls outside the range of 10.0C to 60.0C (14.0F to 140.0F). The temperature value will be displayed again as soon as the measured temperature is within the allowable range. Some countries refer to the barometric pressure unit hecto-pascal (hPa) as millibars (mb). It really makes no difference, because 1hPa = 1mb. In this manual, we use hPa/mb or hPa (mb).

Barometric Pressure Graph
Barometric pressure indicates changes in the atmosphere. By monitoring these changes you can predict the weather with reasonable accuracy. The barometric pressure graph shows the barometric readings for the past 26 hours. The flashing point on the right of the display is the point for the newest measurement. Note that pressure graph readings are relative to the newest measurement point. One dot above the newest point is plus 1hPa(mb)/ 0.05inHg, while one dot below is minus 1hPa(mb)/0.05inHg. The following shows how to interpret the data that appears on the barometric pressure graph.

E NE ENE

A rising graph generally means improving weather. A falling graph generally means deteriorating weather. Note that if there are sudden changes in weather or temperature, the graph line of past measurements may run off the top or bottom of the display. The entire graph will Not visible on become visible once barometric conditions stabilize. the display. The following conditions cause the barometric pressure measurement to be skipped, with the corresponding point on the barometric pressure graph being left blank. Barometric reading that is out of range (260 hPa/mb to 1100 hPa/mb or 7.65 inHg to 32.45 inHg) Sensor malfunction Dead batteries
Note Note that taking a measurement while the watch is not horizontal (in relation to the horizon) can result in large measurement error. Pressing B while in the Digital Compass Mode starts a new direction measurement operation. The following table shows the meanings of each of the direction abbreviations that appear on the display.

Direction Meaning

N E S W
This watch uses a pressure sensor to measure air pressure (barometric pressure) and a temperature sensor to measure a temperature. You can calibrate the temperature sensor and the pressure sensor if you suspect that readings are incorrect.

E SE SSE ES

Direction

North East South West

Meaning Direction Meaning NorthNortheast NE northeast EastESE SE Southeast southeast SouthSSW SW Southwest southwest WestWNW NW Northwest northwest
Meaning Eastnortheast SouthSSE southeast WestWSW southwest NorthNNW northwest
About Barometric and Temperature Measurements
Barometric pressure and temperature measurement operations are performed as soon as you enter the Barometer/Thermometer Mode. After that, temperature measurements are taken every five seconds for the first three minutes, and then taken every five minutes thereafter. The BARO indicator flashes on the display while a measurement is in progress. The barometer automatically takes measurements every two hours (starting from midnight), regardless of what mode you are in. The results of these measurements are used for the barometric pressure graph. You can also perform a barometric pressure and temperature measurement at any time by pressing C in the Barometer/Thermometer Mode.

Memory measurements

Memory measurements are taken independently of Altimeter Mode measurements and stored directly into memory (along with the date and time of the measurement) for later recall. There are two types of memory measurements: Auto measurements and Manual measurements. Auto measurements With Auto measurement, the watch continuously performs measurements whenever the minutes in the Timekeeping Mode reach 00, 15, 30, or 45, until you switch Auto measurements off. The watch continues to take measurements regardless of whether or not you change modes, so you can keep a running log of altitude changes automatically. Manual measurements You can use the manual procedure to take a reading anytime you want to store your current altitude data into memory for later recall. Manual memory measurements can be performed only while the watch is in the Altimeter Mode.
Selecting Auto or Manual Measurement
Use the following procedure to switch between Auto or Manual measurement. Note that you cannot perform this operation while a preset Auto measurement is already in progress.

How the Altimeter Works

With the Preset Values (No Reference Altitude) The watch measures the air pressure at your current location and uses the built-in ISA values to convert it to the equivalent altitude. With a Reference Altitude After you set the reference altitude, the watch adjusts its air pressure to altitude conversion calculation accordingly. To determine the height of a tall building, set the reference altitude to 0 on the ground floor. Note, however, that you may not be able to get a good reading if the building is pressurized or air-conditioned. When mountain climbing, you can set the reference value in accordance with a B marker along the way or altitude information from a map. After you do this, A the altitude readings produced by the 400 watch will be more accurate than they would without a reference altitude. Note that the following conditions will prevent you from obtaining accurate readings: When air pressure changes because of changes in the weather Extreme temperature changes When the watch itself is subjected to strong impact
To select Auto or Manual measurement
1. In the Altimeter Mode, hold down A until the display clears. After four or five seconds, either OFF or the current reference altitude value (if set) will start to flash, which indicates the setting screen. 2. Press D twice to move the flashing to the memory measurement setting (AUTO or MANUAL). Press D to move the flashing in the sequence shown below.

To use Manual measurement
1. Confirm that the MANUAL indicator is shown on the display. If it is not, use the procedure under To select Auto or Manual measurement to select Manual measurement. 2. In the Altimeter Mode, hold down E until the watch emits a short beep, indicating that a measurement is taken. Repeat step 2 whenever you want to take a reading. Button operation becomes impossible during the four or five seconds that it takes to complete a measurement. Normal operation will return once the operation is finished.
About Altitude Measurements
There are two types of altitude measurements: those for displayed data (Altimeter Mode measurements) and those for memory data (Memory measurements).
Setting a Reference Altitude
After you set a reference altitude, the watch adjusts its air-pressure-to-altitude conversion calculation accordingly. The altitude measurements produced by this watch are subject to error caused by changes in air pressure. Because of this, we recommend that you update the reference altitude whenever one is available during your climb.
Altimeter Mode measurement
This type of measurement is performed only when the watch is in the Altimeter Mode. As soon as you enter the Altimeter Mode, measurements are taken every five seconds for the first three minutes. After that, measurements are taken every two minutes. The ALTI indicator flashes on the display while a measurement is in progress.

2271-4

To set a reference altitude
1. In the Altimeter Mode, hold down A until the display clears. After four or five seconds, either OFF or the current reference altitude value (if set) will start to flash, which indicates the setting screen. OFF indicates no reference altitude. 2. Press E to increase the current reference altitude value by 5 meters (or 20 feet) or B to decrease it. You can set the reference altitude within the range of 10,000 to 10,000 meters (32,800 to 32,800 feet). Pressing E and B at the same returns to OFF, so the watch performs air pressure to altitude conversions based on preset data only. 3. Press A to exit the setting screen. Auto Measurement Records Performing an Auto measurement produces a set of records of all the measurements taken during the Auto measurement session. Since Auto measurement produces four altitude readings per hour (at 00, 15, 30, and 45 minutes of each hour) leaving Auto measurement turned on for two hours would result in a set of eight records. The following shows how the records that make up an Auto measurement set appear when you recall them.
AUTO indicator Altitude graph

First record of the set

All records between the initial screen and final screen

Final record of the set

About the Altitude Alarm

The altitude alarm sounds for about five seconds whenever the current altitude matches a preset value. You can press any button to stop the alarm after it starts to sound. Example If you set the altitude alarm at 130 meters, it sounds when you pass the 130meter mark on your way up and on your way back down.
The altitude graph separates the maximum and minimum altitude readings by nine display dots. Other readings are shown relative to the maximum and minimum. Note that Auto measurement records are always treated as a set. This means that deleting one record in a set deletes the entire set. Manual Measurement Records Performing a Manual measurement produces a single record. The illustration below shows how a Manual measurement record appears when you recall it.

MANUAL indicator

To set the altitude alarm
1. In the Altimeter Mode, hold down A until the display clears. After four or five seconds, either OFF or the current reference altitude value (if set) will start to flash, which indicates the setting screen. 2. Press D once to move the flashing to the altitude alarm setting. Press D to move the flashing in the sequence shown below.
To turn the altitude alarm on and off
Altitude alarm on indicator

Current On/Off status

1. In the Altimeter Mode, hold down A until the display clears. After four or five seconds, either OFF or the current reference altitude value (if set) will start to flash, which indicates the setting screen. 2. Press D once to move the flashing to the altitude alarm setting. 3. Press C to switch the altitude alarm on (ON) and off (OFF). 4. Press A to exit the setting screen. If the altitude alarm is on, the altitude alarm on indicator remains on the display when you change to another mode.
Highest Altitude Attained

Lowest Altitude Attained

When you display the MAX screen, the message MAX alternates every second with the date in the upper display. The message MIN alternates on the MIN screen. The MIN and MAX records are changed automatically whenever a measurement produces a reading that is greater than the current MAX value or less than the current MIN value. Note 50 records are enough to store 12 hours and 15 minutes of Auto measurement data (if you do not take any Manual readings during that time). Important! Further Auto or Manual measurements become impossible whenever memory is full. The message FULL on the display indicates that memory is full. Always check the amount of memory remaining before starting memory measurements, and delete records if necessary.

Hours Seconds

STOPWATCH
The stopwatch lets you measure elapsed time, split times, and two finishes. The display range of the stopwatch is 23 hours, 59 minutes, 59.99 seconds. The stopwatch continues to run, restarting from zero after it reaches its limit, until you stop it. The stopwatch measurement operation continues even if you exit the Stopwatch Mode. All of the operations in this section are performed in the Stopwatch Mode, which you enter by pressing D.

Minutes 1/100 second

To delete a altitude measurement record
1. In the Recall Mode, display the record you want to delete. If you want to delete a set of Auto measurement records, display the first record of the set. 2. To clear the data, hold down A until the watch emits a long beep (and until CLR stops flashing on the display).
To measure times with the stopwatch Elapsed Time
E Start E Stop E Re-start E Stop B Clear

Split Time

E Start B Split B Split release E Stop B Clear
Alarm Time (Hour : Minutes) Alarm on indicator

Two Finishes

E Start B Split First runner finishes. E B Stop Split release Second runner finishes. Record time of Record time of first second runner. runner. B Clear
Timekeeping Mode time Alarm number
You can set five independent Daily Alarms. When an alarm is turned on, the alarm tone sounds when the alarm time is reached. You can also turn on an Hourly Time Signal that causes the watch to beep twice every hour on the hour. The alarm number (1 through 5) indicates an alarm screen. SIG appears in place of AL when the Hourly Time Signal screen is shown. All of the operations in this section are performed in the Alarm Mode, which you enter by pressing D.

BACKLIGHT

Auto light switch on indicator

To set an alarm time

1. In the Alarm Mode, use E and B to select the alarm whose time you want to set. Press E. Press B. AL-1 AL-2 AL-3
The backlight uses an EL (electroluminescent) panel that causes the entire display to glow for easy reading in the dark. The watchs auto light switch automatically turns on the backlight when you angle the watch towards your face. The auto light switch must be turned on (indicated by the auto light switch on indicator) for it to operate. See Backlight Precautions for other important information about using the backlight.
To turn on the backlight manually

Precautions Concerning Simultaneous Measurement of Altitude and Temperature Though you can perform altitude and temperature measurements at the same time, you should remember that each of these measurements require different conditions for best results. With temperature measurement, it is best to remove the watch from your wrist in order to eliminate the effects of body heat. In the case of altitude measurement, on the other hand, it is better to leave the watch on your wrist, because doing so keeps the watch at a constant temperature, which contributes to more accurate altitude measurements. The following describes what you should do to give priority to either altitude or temperature. To give altitude measurement priority, leave the watch on your wrist or in any other location where the temperature of the watch is kept constant. To give temperature measurement priority, remove the watch from your wrist and allow it to hand freely from your bag or in another location where it is not exposed to direct sunlight. Note that removing the watch from your wrist can momentarily affect pressure sensor readings. Question: How does the barometer work? Answer: Barometric pressure indicates changes in the atmosphere, and by monitoring these changes you can predict the weather with reasonable accuracy. Rising atmospheric pressure indicates good weather, while falling pressure indicates deterioration weather conditions. The barometric pressures that you see in the newspaper and on the TV weather report are measurements corrected to values measured at 0 m sea level. Question: What should I do if I lose track of which mode I am in or lose my way when making settings? Answer: Hold down D for about one second to return to the Timekeeping Mode. Next, try performing the operation you want again.

REFERENCE

This section contains more detailed and technical information about watch operation. It also contains important precautions and notes about the various features and functions of this watch.
For example, when the Magnetic North Pointer is pointing at 90 on the watchs face, it means that the 12 oclock position is 90 degrees from magnetic north (which means that the 12 oclock pointing due east). Question: How does the altimeter work? Answer: Generally, air pressure and temperature decrease as altitude increases. This watch bases its altitude measurements on International Standard Atmosphere (ISA) values stipulated by the International Civil Aviation Organization (ICAO). These values define relationships between altitude, air pressure, and temperature.
Altitude 616 hPa/mb 3500 m 3000 m 2500 m 2000 m 1500 m 1000 m 0m 500 m 701 hPa/mb 795 hPa/mb 899 hPa/mb 1013 hPa/mb Air Pressure Temperature 11C 4.5C 2C 8.5C 15C About 6.5C per 1000 m

Auto Display Function

Auto Display function of this watch continually changes the contents of the digital display. Note that you cannot use any of the watchs other functions while the Auto Display function is operating.
To turn the Auto Display off
Hold down D for about three seconds until the watch beeps.
To turn the Auto Display on
In the Timekeeping Mode, hold down D for about three seconds until the watch beeps three times. Note that the Auto Display function cannot be performed while you are making settings.

4000 m

About 8 hPa/mb per 100 m About 9 hPa/mb per 100 m About 10 hPa/mb per 100 m About 11 hPa/mb per 100 m About 12 hPa/mb per 100 m

Warning Indicators

Warning indicators appear whenever any of the conditions described below occur. Appearance of a warning indicator causes any measurement operation that is currently underway to stop. Warning indicators appear in the upper display area, and this causes xxx to replace any directional, temperature, barometer, or altitude values on the display.
Source: International Civil Aviation Organization
14000 ft 12000 ft 10000 ft 8000 ft 6000 ft 4000 ft 2000 ft 0 ft
19.03 inHg 22.23 inHg 25.84 inHg 29.92 inHg
About 0.15 inHg per 200 ft About 0.17 inHg per 200 ft
16.2F 30.5F About 3.6F per 1000 ft
Abnormal Magnetic Field Indicator
This indicator appears whenever the watch has a problem obtaining a correct direction reading. This condition could indicate that the watch is within a very high magnetic field, and so you should try moving to another location. Also, see Digital Compass Precautions for further information on conditions that cause errors.
About 0.192 inHg per 200 ft 44.7F About 0.21 inHg per 200 ft 59.0F

2271-7

Low Battery Indicator
This message indicates that battery power is too low to perform the measurement. It appears whenever battery power drops below a certain level, or when you try to perform a measurement under very cold conditions (below about 10C/14F). If the cause of the low battery indicator is due to use under cold conditions, normal operation should return after the watch is brought back to normal temperature. If the cause of the low battery indicator is due to low battery power (indicated appears under normal temperatures), you should have the when watchs batteries replaced as soon as possible. Note that replacement of the batteries causes all memory contents to be deleted.
Auto light switch precautions
Avoid wearing the watch on the inside of your wrist. Doing so causes the auto light switch to operate when it is not needed, which shortens battery life. If you want to wear the watch on the inside of your wrist, turn off the auto light switch feature.
More than 15 degrees too high
The backlight may not light if the face of the watch is more than 15 degrees above or below parallel. Make sure that the back of your hand is parallel to the ground. The backlight turns off in about one second, even if you keep the watch pointed towards your face.

Sensor Malfunction Indicator
This message flashes on the display to indicate malfunction of pressure sensor circuitry. Note that calibrating the Digital Compass can message to appear. also cause the In this case, the message does not indicate sensor malfunction, and the condition should be corrected when you re-calibrate the Digital Compass. Important! If a sensor malfunctions or if battery power is low when it comes time for a measurement to be taken, the measurement value appears as xxxx on the display. In the case of barometric pressure measurement, the corresponding point on the barometric pressure graph is left blank. (sensor malfunction) There may be cases where the (low battery) message disappears from the display when you or change modes. In this case, you can continue using the watch normally unless the warning indicator reappears. Whenever you have a sensor malfunction, be sure to take the watch to an authorized CASIO distributor or service provider as soon as possible.
Static electricity or magnetic force can interfere with proper operation of the auto light switch. If the backlight does not light, try moving the watch back to the starting position (parallel with the ground) and then tilt it back toward you again. If this does not work, drop your arm all the way down so it hangs at your side, and then bring it back up again. Under certain conditions, the backlight may not light until about one second after you turn the face of the watch towards you. This does not necessarily indicate malfunction of the backlight.
Digital Compass Precautions
This watch features a built-in magnetic bearing sensor that detects terrestrial magnetism. This means that north indicated by this watch is magnetic north, which is somewhat different from true polar north. The magnetic north pole is located in northern Canada, while the magnetic south pole is in southern Australia. Note that the difference between magnetic north and true north as measured with all magnetic compasses tends to be greater as one gets closer to either of the magnetic poles. You should also remember that some maps indicate true north (instead of magnetic north), and so you should make allowances when using such maps with this watch. Location Taking a direction reading when you are near a source of strong magnetism can cause large errors in readings. Because of this, you should avoid taking direction readings while in the vicinity of the following types of objects: permanent magnets (magnetic necklaces, etc.), concentrations of metal (metal doors, lockers, etc.), high tension wires, aerial wires, household appliances (TVs, personal computers, washing machines, freezers, etc.) Accurate direction readings are impossible while in a train, boat, air plane, etc. Accurate readings are also impossible indoors, especially inside ferroconcrete structures. This is because the metal framework of such structures picks up magnetism from appliances, etc. Storage The precision of the bearing sensor may deteriorate if the watch becomes magnetized. Because of this, you should be sure to store the watch away from magnets or any other sources of strong magnetism, including: permanent magnets (magnetic necklaces, etc.) and household appliances (TVs, personal computers, washing machines, freezers, etc.) Whenever you suspect that the watch may have become magnetized, perform one of the calibration procedures under Calibrating the Bearing Sensor below.

Auto Return Features

After you perform an operation in the Recall, Alarm, and Stopwatch Modes, pressing D returns to the Timekeeping Mode. If you leave the watch in the Digital Compass, Barometer/Thermometer, or Altimeter Mode for 10 to 11 hours without performing any operation, the watch beeps and automatically returns to the Timekeeping Mode. If you leave a screen with flashing digits on the display for two or three minutes without performing any operation, the watch automatically saves anything you have input up to that point and exits the setting screen.
Data and Setting Scrolling
The E and B buttons are used in various modes and setting screens to scroll through data on the display. In most cases, holding down these buttons during a scroll operation scrolls through the data at high speed.

Timekeeping

The day of the week is automatically displayed in accordance with the date (year, month, and day) settings. The year can be set in the range of 2000 to 2039. The watchs built-in full automatic calendar automatically makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after you have the watchs batteries replaced.
Calibrating the Bearing Sensor
Whenever you suspect that direction readings produced by the watch are wrong, you should calibrate it. You can use either one of two calibration procedures: bidirectional calibration or northerly calibration. Use bidirectional calibration when you want to take readings within an area exposed to magnetic force. This type of calibration should be used if the watch become magnetized for any reason. With northerly calibration, you teach the watch which way is north (which you have to determine with another compass or some other means). You could use this calibration procedure, for example, to set the watch to indicate true north instead of magnetic north. Important! If you want to perform both bidirectional and northerly calibration, be sure to perform bidirectional calibration first, and then perform northerly calibration. This is necessary because bidirectional calibration cancels any previously set northerly calibration setting. The more correctly you perform bidirectional calibration, the better the accuracy of the bearing sensor readouts. You should perform bidirectional calibration whenever you change environments where you use the bearing sensor, and whenever you feel that the bearing sensor is producing incorrect readings.

12-hour/24-hour Timekeeping Formats
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is also applied in all modes. With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for times in the range of noon to 11:59 p.m. and no indicator appears to the left of the hour digits for times in the range of midnight to 11:59 a.m. With the 24-hour format, times are displayed in the range of 0:00 to 23:59, with 24 indicator.

Backlight Precautions

The electro-luminescent panel that provides illumination loses power after very long use. The illumination provided by the backlight may be hard to see when viewed under direct sunlight. The watch will emit an audible sound whenever the display is illuminated. It does not indicate malfunction of the watch. The backlight automatically turns off whenever an alarm sounds. The backlight remains lit for about one second from the point you press the button, even if it is already lit when you press the button. If you keep the button depressed for one second or more, the backlight automatically turns off. Frequent use of the backlight shortens the battery life.
To perform bidirectional calibration
1. Enter the Digital Compass Mode. 2. Hold down A until the upper display area changes to show -1-, which indicates the setting screen. At this time, the magnetic north pointer flashes at the 12 oclock position to indicate that the watch is ready to calibrate the first direction.

2271-8

3. Place the watch on a level surface facing any direction you want, and press B to calibrate the first direction. When the calibration procedure is complete, the message OK appears in the upper display area. This soon changes to -2- and the magnetic north pointer flashes at the 6 oclock position to indicate that the watch is ready for the second direction. 4. Rotate the watch 180 degrees. 5. Press B again to calibrate the second direction. When the calibration procedure is complete, the message OK appears in the upper display area. After a short while, the watch automatically returns to the Digital Compass Mode screen. Precautions about bidirectional calibration You can use any two opposing directions for bidirectional calibration. You must, however, make sure that they are 180 degrees opposite each other. Remember that if you perform the procedure incorrectly, you will get wrong bearing sensor readings. Do not move the watch during the one or two seconds (from the point you press B up to the point that OK appears in the upper display area) that the calibration of each direction is in progress. If you do, the message appears in the upper display area, which means you have to restart the bidirectional calibration procedure from the beginning. during bidirectional calibration can also be The appearance of caused by local interference. If you suspect that this is the case, move to another location and try the procedure again. You should perform bidirectional calibration in an environment that is the same as that where you plan to be taking direction readings. If you plan to take direction readings in an open field, for example, calibrate in an open field.

To calibrate the temperature
1. Press C to enter the Barometer/ Thermometer Mode. 2. Hold down A until the message OFF appears (flashing), which indicates the setting screen. A temperature value appears instead of OFF (factory calibration) if you previously calibrated the temperature sensor. 3. Each press of E increases the displayed temperature by 0.1C (or 0.2F) while pressing B decreases it. Pressing B and E at the same time returns to the factory calibration (OFF). The indicator TEMP ADJ on the display indicates that the temperature value has been calibrated. 4. Press A to return to the Barometer/Thermometer Mode screen.
Calibrating the Barometric Pressure Sensor
The pressure sensor of this watch is calibrated at the factory before shipment and further adjustment is normally not required. If you notice serious errors in the barometric pressure readings produced by the watch, you can calibrate the sensor to correct the errors. Important! Incorrectly calibrating the barometric pressure sensor can result in incorrect readings. Before performing the calibration procedure, compare the readings produced by the watch with those of another reliable and accurate barometer.
To perform northerly calibration
1. While in the Digital Compass Mode, hold down A until the upper display area changes to show -1-, which indicates the setting screen. 2. Press D to start the northerly calibration procedure. At this time, the indicator (direction N) appears in the upper display area. 3. Place the watch on a level surface, and position it so that its 12 oclock position points north (as measured with another compass). 4. Press B to start the calibration operation. When the calibration procedure is complete, the message OK appears in the upper display area. After a short while, the watch automatically returns to the Digital Compass Mode screen.
To calibrate the barometric pressure
1. Press C to enter the Barometer/ Thermometer Mode. 2. Hold down A until the message OFF appears (flashing), which indicates the setting screen. A temperature value appears instead of OFF (factory calibration) if you previously calibrated the temperature sensor. 3. Press D to move the flashing to the barometric pressure calibration setting. At this time, OFF or the barometric pressure value should be flashing on the display. 4. Each press of E increases the displayed barometric pressure by 1 hPa/ mb (0.05 inHg), while pressing B decreases it. Pressing B and E at the same time returns to the factory calibration (OFF). 5. Press A to return to the Barometer/Thermometer Mode screen.

 

Tags

Spiderman 2 85961 KDL-15G2000 Plus 2005 WK-500 CMT-EP313 RM-PP412 Gpsmap 78S SEB 872 Mediaplayer Cuvlvm Rifle VGN-AR61E Royal 668 XWO Kodiak PM-980C FL904NN KA-S10 Futaba 7CAP PA20R Tascam M520 PV-L550D HS8020 18 Aspire-3690 AUS Pentax MZ-7 KX-TS600FXW DMC-FX30 AR-C172M R-209HK AH530 TM-T88V Touch 156 42PC5D MPS CD-RW901 070 GB DKS-6000 PV530-ITX SGH-S400I Set-TOP SX-LX08 AK701 1800 RE CDX-R3350C Lexmark T522 YBR125-2003 Review Slide E7935 Server KDC-W410 HD300LD-KIT Notebook Asko W660 MY210X Digital AW-E560 6350 Live AF-540FGZ UA46C6200UR Odelia 480 HT-S580 Kxtga651E D AIR Imedia 1559 Dyson DC22 40 MC Sbcru110 HP-100 Deskjet 3420 PSR-S550 Coronas AW1500V Wtxl2101 RB-971 TS1353 KX-TG7100NL L150A Deskjet 843C Press DC390KB VG600 Acdsee 12 Lansing M602 PC-160 TX-L32x10BA FX-3950P NV-GS55GC 240V Beetel 1000 CQ-VW100N On Time LE-40F71B TH-42PWD6EX KDC-W5041U Multitrim 200 LL-1020V TI-5032 SVC LS-K2463CL

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101