Reviews & Opinions
Independent and trusted. Read before buy CAT EYE Cc-MT200 Mity 2!

CAT EYE Cc-MT200 Mity 2 Manual

Download (English)
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.


CAT EYE Cc-MT200 Mity 2About CAT EYE Cc-MT200 Mity 2
Here you can find all about CAT EYE Cc-MT200 Mity 2 like manual and other informations. For example: review.

CAT EYE Cc-MT200 Mity 2 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a CAT EYE Cc-MT200 Mity 2 please write about it to help other people.
[ Report abuse or wrong photo | Share your CAT EYE Cc-MT200 Mity 2 photo ]

User reviews and opinions

Comments to date: 13. Page 1 of 1. Average Rating:
JonatanStrom 8:00am on Thursday, October 21st, 2010 
This card was made right when Amd was Buying out ati This card Pushed it to the limit the core memory IS OVER CLOCKED TOO FAR This card was made right when Amd was Buying out ati This card Pushed it to the limit the core memory IS OVER CLOCKED TOO FAR
_oanal 9:42am on Monday, September 20th, 2010 
Sapphire RADEON HD 2600XT - Graphics adapter - Radeon HD 2600XT - AGP 8x - 512 MB GDDR3 - Digital Visual Interface (DVI) ( HDCP Great card for the mon...
ikaros 1:29am on Monday, September 13th, 2010 
If you have an AGP motherboard this is an excellent option for decent graphics performance.
sflave 9:45pm on Sunday, September 12th, 2010 
Great product Great Prices Got my product super quick, Was exactly what I wanted and great services. I will buy from them again. Brought new life to old machine Just a quickie here. I had been using an ATI all-in-wonder.
Ace_NoOne 2:02am on Sunday, September 5th, 2010 
None. Card was damaged Video card was in a sealed box which was not bent or damaged in any way, but when the box was opened.
JonC 10:24pm on Friday, August 20th, 2010 
Not BuyDig's fault. VisionTek support recommended this card for my Dell Dimension 3000. If you have this PC.
avangard 11:14am on Wednesday, August 4th, 2010 
This may be a good card, but not for a Linux system I have previously always had ATI cards. Mis-labelled The picture shows a HD 2600 PRO, whereas the label is for a HD 2600 XT.
Rau 2:14am on Saturday, July 24th, 2010 
card is a good all-around midrange gamer. bu...  good speed for the price ati drivers
Perrot 2:20pm on Tuesday, June 29th, 2010 
awesome card i got this card for a new build. keep in mind that the card is just over a foot long as it is dual gpu.
chrike 5:08am on Saturday, June 12th, 2010 
Great card for modest price I am impressed how this card handles. It is definitely a high end card, and its reasonable price makes it great value. speeds up Vista I used this card to upgrade my computer from the graphics built in to the motherboard. My windows experience index improved from 3.
Anneli 9:30pm on Monday, April 26th, 2010 
It might turn out to be a good buy. Since I am not a gamer perhaps my expectations were too high for this HD Card. Time will tell.
fgudefin 3:56am on Thursday, April 8th, 2010 
the first thing i noticed when i got this card way back was theIDE cable on the top. i know its used t transfer the image from th dvi port to the vga,...
todoporron 6:39am on Saturday, March 20th, 2010 
So-called techs need to learn the difference between PCI, PCI-X & PCIe. My servers have PCI-X slots but the techs keep referring me to PCIe parts!

Comments posted on are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.




Setting Values Cross Reference Table (The tire size is marked on both sides of the tire.) Table de Correspondance des Valeurs de Rglage (La dimension du pneu figure de chaque ct du pneu)
Wertetabelle zur Einstellung des Radumfanges (die Radgre entnehmen Sie der Aufschrift des Reifens)
Tabel voor het bepalen van de wielomtrek (de bandenmaat staat vermeld aan beide zijden van de band)
Tabella delle Corrispondenze dei Valori di Regolazione (La dimensione del pneumatico figura su ogni lato del pneumatico) Tabla de Valores (El tamao de la rueda est marcado al lado de la llanta) TIRE SIZE
dimension du pneu Radgre bandenmaat dimensione del pneumatico Tamao de rueda


20 x 1.x 1
U.S. Pat. Nos. 4636769/4642606/5236759/5226340 and Design Patented Copyright 1995 CATEYE Co., Ltd. CCMMT2-981120 Printed in Japan 0687350

207 210

26 x 1.x 1.x 1.x 1.x 2.x 2.x 2.x 2.x x 1-1/x 1-1/x 1-3/x 35A 650 x 38A

209 212

650 x 38B 700 x 18C 700 x 19C 700 x 20C 700 x 23C 700 x 25C 700 x 28C 700 x 30C 700 x 32C 700C Tubular 700 x 35C 700 x 38C 700 x 44C
24 x 3/4 Tubular 24 x 1-1/8 Tubular 24 x 1-1/x 1.x 2.x 2.x 1(559mm) 26 x 1(650c) 26 x 1.x 1-1/8 Tubular 26 x 1-3/x 1-1/2


1-Year Warranty for Main Unit Only (Accessories/Attachments and Battery Consumption excluded)
If trouble occurs during normal use, the part of the Main Unit will be repaired or replaced free of charge. The service must be performed by Cat Eye Co., Ltd. To return the product, pack it carefully and remember to enclose the warranty certificate with instruction for repair. Please write or type your name and address clearly on the warranty certificate. Insurance, handling and transportation charges to our service shall be borne by person desiring service.
Specifications/Caracteristiques techniques/Technische daten/Specificaties/ Caratteristiche tecniche/Especificaciones/
Controller/Calculateur/Controler/Controleur/Elaboratore/Contador/ ----------------------------------- 4-bit 1-chip Microcomputer (Crystal Controlled Oscillator) Display/Affichage/Anzeige/Display/Visualizzazione/Pantalla/ ---------------------------------------------------------------------------------- Liquid Crystal Display Sensor/Dtecteur/Sensor/Sensor/Rivelatore/Sensor/ ------------------------------------------------------------------------- No Contakt Magnetic Sensor Operating Temperature Range/Temprature dutilisation /zulssige Betriebstemperatur/Toegestane temp./Temperatura di utilizzo/ ----------------------------------------------------------------------------- 0C - 40C(32F - 104F)

(Address for service)

CO.,LTD. 2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546-0041 Japan Attn.: CAT EYE Customer Service Section Service & Research Address for United States Consumers: CATEYE Service & Research Center 1705 14th St. 115 Boulder, CO 80302 Phone: 303-443-4595 Toll Free: 800-5CATEYE Fax: 303-473-0006 e-mail:



Attachment Kit Kit de Gamitures Befestigungsmaterial Kabelbevestigingset Guarnizioni da montare Elementos de fijacin


Se garantiza por un ao nicamente el grupo central (Los accesorios, aditamentos y el consumo de la pila estn excluidos) Si ocurriera alguna avera durante el uso normal, se reparar o sustituir la pieza o el grupo central. Cat Eye Co., Ltd. deber realizar la reparacin. Para devolver el producto, envulvalo cuidadosamente y no olvide incluir el certificado de garanta y las instrucciones para repararlo. Rogamos escribir claramente a mano o a mquina su nombre y direccin. Los gastos de seguro, manipulacin y transporte sern a cargo de la persona que solicite la reparacin.
Direccin para las reparaciones:


Universal Sensor Band Garniture Universelle pour Dtecteur Universal Befestigungsband Universele Sensor klemstrip Guanizione Universale per Sensore Banda del Sensor Universal


Wheel Magnet Aimant pour roue Radmagnet Wielmagneet Magnete ruota Iman de la rueda


Lithium Battery (CR1620) Pile au lithium Lithium-Batterie Lithum Batterij Bateria al Litio Bateria de Litio




rubber pad
screw cap Fig.15 Test (Fig.16) lever Mount main unit. If main display does not show any figures, press either
Use either 1mm- or 2 mm-thick pads if necessary, according to handlebar diameter. Attach the bracket close to the handlebar stem (fig. 15). Slide main unit onto the bracket from front until it clicks into position. To remove, pull it off forward while pushing down the lever. (fig. 16)

A. B. C. D. E. F. G.

Main Display (Speed) Sensor Pulse Symbol Mode Symbol Speed Scale Symbol Auto Mode Symbol Sub-Display (Selected Function) M (Mode) Button

H. I. J. K. 1. 2. 3.

S/S (Start/Stop) Button Set Button Battery Case Cover Contact Bracket Wire Sensor

4. 5. 6. 7. 8. 9. 10.

Sensor Bands-A (S)(L) Sensor Bands-B Magnet Sensor Band Rubber Pad Bracket Rubber Pad (2 pcs.) Wire Securing Tape Sensor Band Screw


M button or S/S button to release from power saving function. Spin the wheel to check if sensor pulse symbol flashes. If not, adjust relative positions of magnet and sensor following the instructions.

CR1620 /CR1616



M button (Fig.1)
Changes the display in the order shown in fig. 1, and data is displayed on the sub-display. *If held over 2 seconds, 12-hour clock appears.
Turn main unit over, remove battery case cover with coin and insert a new lithium battery properly (CR1620 or CR1616) with the (+) pole upward (fig.17), and close the cover securely. * Please make sure to do the All Clear operation after replacing battery, and to set the unit again. Fig.17

Current Speed 0.0(3.0) - 65 mile/h(27inch) 1 mile/h under31 miles/h This is always displayed on the main display and updated once a second. SPD ODO Total Distance (Odometer) 0.0 - 9999.9 mile 0.1 mile This is continuously measured until battery wears down or all clear operation is done. At 10,000 miles(km), it returns to zero and counting begins anew. Trip Distance 0.00 - 999.99 mile 0.01 mile The trip distance from start to current point is displayed. With Reset operation, it returns to zero. DST TM Elapsed Time 0:00'00" - 9:59'59" 0.003 % Elapsed time is measured from start to current point, in units of hours, minutes and seconds. At 10 hours, it returns to zero and counting begins anew. With Reset operation, it returns to zero. AVS Average Speed 0.0 - 65.0mile/h 0.3 mile/h The average speed from start to current point is displayed within 27 hours 46 minutes 39 seconds (99,999 seconds) or 999.99 miles (km). If either is exceeded, (.E) is displayed and calculation ceases. MXS Maximum Speed 0.0(3.0) - 65 mile/h(27inch) 1 mile/h With Reset operation, it returns to zero and counting begins anew. 12-hour clock time
The current time is displayed by a 12-hour clock. 0:00' - 11:59' 0.003 %

S/S button

Starts and stops the measurement of trip distance and elapsed time. During operation, speed scale symbol flashes. In Auto Function, this button is invalid.

SET Button

This is for setting the wheel circumference and clock time, switching on/ off Auto Function and to clear all present data and any irregularity. When pressed in stop state in each mode, the following can be revised. In ODO mode --------------------- Wheel circumference In mode ----------------------- 12-hour clock In TM, DST or AVS mode ----- On/off the Auto function

Reset Operation: (Fig.2)

Select any mode except ODO, then press M button and S/S button simultaneously. MXS, AVS, DST and TM will become zero. (When done in ODO, registered wheel circumference will be displayed.)
All Clear Operation: (Fig.3)
When M button, S/S and set buttons are pressed simultaneously, all data stored (ODO, speed scale, Wheel circumference and clock time) is erased. All displays illuminate, then mile/h symbol illuminates. This should only be executed after replacing battery or when irregular display occurs due to static electricity, etc. Since all memories are erased, set necessary data again according to "Main Unit Preparation".
The following must be completed before operating.
This function switches the main unit to start or stop automatically, in which AUTO symbol appears on the screen, and you are free from pressing S/S button each time.

Fig.7 sporkes

(1) How to measure wheel circumference (L) of your bike (Fig.4)
Put a mark on the tire tread and ride the bike one full wheel revolution. Mark the start and the end of the revolution on the ground and then measure the distance between the two marks. This is your actual circumference. Or, the "Selecting Values Cross Reference Table" tells you an approximate circumference according to tire size.
How to switch on/off the Auto Function.
In TM, DST or AVS, this function switches on/off with each press of SET button. When on, AUTO symbol appears. *With this function, it ceases measuring elapsed time during a stop. * 2 seconds may be elapsed if mount the main unit to the bracket with this function on.


When main unit is left without receiving any signal for 60-70 minutes continuously, power supply is shut down and main unit will display ( ) only as the figure. By pressing M button or S/S button, or by receiving signal, this function is released.
magnet Fig.8 sensor band B

(2) Setting Speed Scale

Preform all clear operation. All displays will illuminate. Then mile/h alone will be displayed as illustrated in fig.5. Km/h and mile/h are alternately displayed with each press of S/S button. Press M button to set desired speed scale. The display will change as fig. 6.


The following situations do not indicate malfunction of the cyclocomputer. Check the following before taking to repair. When current speed does not appear, short-circuit the contact on the back with metal. The unit will function normally if the speed display appears. Display response is slow. ----- Is it at a low temperature under 32F(0C)? ----- It returns to normal state when temperature rises. No display. ----- Has the Lithium Battery in the main unit worn out? ----- Replace the Lithium Battery with a new one. Incorrect data appear. ----- Execute "All Clear" operation. Current speed does not appear. ----- Is there anything on the contact of the main unit or of the bracket? ----- Wipe the contact clean. ----- Is the distance between sensor and magnet too far? ----- Are the marking line of the sensor and the center of magnet matched each other? ----- Refer to "Sensor/Magnet Mounting" and re-adjust correctly. ----- Is the wire broken? ----- Replace the Bracket & Sensor part with a new one. Transmission signal loss in damp or wet conditions. ----- Water or condensation may collect between the bracket sensor and the computer causing an interruption in the data transmission. Wipe the contacts with dry cloth. Contacts can also be treated with a water repellent silicon jell from an automotive parts or hardware store. Do not use industrial water repellent; it may damage the bracket. When the S/S button is pressed, the unit doesn't activate or stop. ----- Is the unit in the Auto function? ----- The S/S button doesn't function in the Auto function. *

(3) Setting the wheel circumference (Fig.6)
The standard wheel circumference of 216 cm for 27" wheel is displayed. When using 216 cm without revision, press M button. ODO will be dissensor band A Fig.9 played and 216 cm is set. For revision, press S/S button to increase the number by one. To increase rapidly, hold down the button. When the sensor band B desired number appears, press M button. ODO will be displayed, and rubber pad the desired number is set.

sensor band A parallel

(4) Resetting or changing the wheel circumference
SET button. The stored number will flicker on the sub-display. Revise the number as desired according to the instructions in (3).
Fig.10 Set main unit in ODO with M button, and stop it with S/S button. Press

sensor band A

Setting the clock time (Fig.7)
Press M button over 2 seconds to select , and stop it with S/S button. Then press SET button, and minutes flash. Press S/S button to advance minutes by one. To advance rapidly, hold down the button. Set Fig.11 the time one or two minutes ahead of the current time. Then press M button, and hours will flash. Use S/S button the same way. Press SET button to complete time setting. *When you press the SET button, the undisplayed seconds will turn to zero. For accuracy, set by the radio time signal.
fork sensor markingline of sensor

center of magnet

The spokes must run correctly through the inside the magnet as in sensor fig.8. magnet Attach the sensor with Sensor Bands-A-B to the right fork. Choose a band that fits the fork diameter (S size for up to 24, L for oversize). 1. Insert the band-B into the slit of the band-A, and put the rubber pad inside of the band-A(fig. 9). Adjust the length in order that the screw-fastening part of the bands are parallel when mounted to the about 2mm Fig.13 fork(fig. 10). *To pull out the band B from band A, tug strongly. 2. Mount the adjusted bands to the fork along with the sensor, by temouter cable porarily tightening the screw(fig. 11). 3. Align the magnet's center and the sensor's marking line(fig. 12), and make sure of 2mm clearance between the magnet and sensor (fig. 13). Then tighten the screw securely. Cut the excess of the band-B with a nipper or the like. wire securing Secure the wire with tape as fig. 14. Wind the wire round the outer tape cable and adjust length. Loosen the wire in the area marked with the arrow so that the wire does not hinder handlebar operation. Fig.14 wire


Do not leave the main unit exposed to direct sunlight when the unit is not in use. Do not disassemble the main unit, sensor and magnet. Don't pay too much attention to your computer's functions while riding! Keep your eyes on the road and duly consider to traffic safety. Check relative position of sensor and magnet periodically. For cleaning, use neutral detergent on soft cloth, and wipe off later with dry cloth. Do not apply paint thinner, benzine, or alcohol, to avoid damages on the surface. If there is mud, sand or the like clogs between the button and the body, the movement of the button may be disturbed. Softly wash away such objects with water.


Applicable Cycle Sizes Applicable Fork Diameter The length of the wire Power Supply Battery Life 130cm - 229cm 11 - 36 (S:11 - 26 L:21 - 36) 70cm Lithium Battery (CR1620/CR1616) x 1 Approx. 3 years(The life of the first factory-loaded battery may be shorter than this period.) Dimension/Weight 1-13/16" x 1-5/8" x 9/16" (46 x 41 x 14 mm) / 0.79 oz (22.5 g) * The specifications and design are subject to change without notice.



CFD-S20CP Dvdr725H 02 32PW6518 Nokia 22 HK-10 Amplifier Hp 450 HM108-A MDP-333 MX3100 NX420 C II 50PC55 Villager Levelar GC-405 Mark III VSX-D811S W705A 29PT558A-78R PDP-427XA Malibu 2004 Flash FO 3150 CID 2002 Thinkpad R51E Guide NX9110 50PC56 CLX-6210FX DCR-PC105 Hydromotrix 45KW R-510HK RA-311 Maker Modena F1 E-TEN M700 AY-P22NC Clio 2 LAC5900RIN Aspire 5635 RFX-2200 500-S Playstation 3 GR-D240 WL5460AP 14PV210 Photosmart 100 Subwoofer Navigator 1999 X2-00 Blackberry 8707 S 2000 TH-42PX60 32PFL7403D 10 W311R LE55A956 Diva P90 RDM 168 Odelia 750 GX30I SC-6500 USR9630 CDS 120 All-IN-ONE KD-PDR51 Abit IB9 AD-500 Premium LN32C450e1M LE40A557p2F Blackberry 7750 SCX-5315 PRO 7950 Discovery GT-S5510T 22LC2D Opal 1003 Warmer PB8120 KDL-32D2710 707si KX-F750 T-X55 Pokewalker KV-25X5K Review NN-CD767 171SPF TX-555ZL MAC 335 Manual ZKF100 KX-TGA830RU CFX12 Mkii Viking BHS-1200 Inspiron 1525 Salmosa Camera FS-SD7


manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101