CAT EYE Cc-MT400 Manual
CAT EYE Cc-MT400, size: 284 KB
Cateye Mity-8 Cyclocomputer . CC-MT400 .8 Functions. The Mity-8 features a tool-free accessible set button, improved mode navigation, light weight sensor wire for rear use, 65mph max speed reading.
Part Number: 129437
Here you can find all about CAT EYE Cc-MT400, for example manual and review. You can also write a review. [ Report abuse or wrong photo | Share your CAT EYE Cc-MT400 photo ]
User reviews and opinions
|Pankaj||12:25pm on Thursday, September 23rd, 2010|
|Not BuyDig's fault. VisionTek support recommended this card for my Dell Dimension 3000. If you have this PC.|
|mdynac||11:08pm on Tuesday, August 24th, 2010|
|This card was made right when Amd was Buying out ati This card Pushed it to the limit the core memory IS OVER CLOCKED TOO FAR|
|ralleon||4:16am on Sunday, August 22nd, 2010|
|Dell is not as trustworthy or reliable as I previously thought. I received this yesterday. It was used missing adapters and a component was broken off of the board. Dell is sending me a new on today|
|RachelGarrett||11:14am on Thursday, August 12th, 2010|
|awesome card i got this card for a new build. keep in mind that the card is just over a foot long as it is dual gpu.|
|craigm||5:22am on Thursday, August 5th, 2010|
|This card was made right when Amd was Buying out ati This card Pushed it to the limit the core memory IS OVER CLOCKED TOO FAR It might turn out to be a good buy. Since I am not a gamer perhaps my expectations were too high for this HD Card. Time will tell. card is a good all-around midrange gamer. bu... good speed for the price ati drivers|
|albh||1:22pm on Wednesday, August 4th, 2010|
|If you have an AGP motherboard this is an excellent option for decent graphics performance.|
|bgsherm||1:08pm on Sunday, July 18th, 2010|
|Great product Great Prices Got my product super quick, Was exactly what I wanted and great services. I will buy from them again. Brought new life to old machine Just a quickie here. I had been using an ATI all-in-wonder. Great card for modest price I am impressed how this card handles. It is definitely a high end card, and its reasonable price makes it great value.|
|XRumer448||11:00pm on Wednesday, June 9th, 2010|
|Sapphire RADEON HD 2600XT - Graphics adapter - Radeon HD 2600XT - AGP 8x - 512 MB GDDR3 - Digital Visual Interface (DVI) ( HDCP Great card for the mon... This may be a good card, but not for a Linux system I have previously always had ATI cards.|
|ChrisWalquist||5:21pm on Thursday, June 3rd, 2010|
|the first thing i noticed when i got this card way back was theIDE cable on the top. i know its used t transfer the image from th dvi port to the vga,...|
|quichote||5:43am on Saturday, April 24th, 2010|
|speeds up Vista I used this card to upgrade my computer from the graphics built in to the motherboard. My windows experience index improved from 3.|
|RobH||11:32am on Wednesday, April 21st, 2010|
|Mis-labelled The picture shows a HD 2600 PRO, whereas the label is for a HD 2600 XT.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
CAT EYE MITY 8
CYCLOCOMPUTER CC-MT400 E: Owners Manual
Pay attention to the road or trail! Do not be distracted by the computer. Be sure to securely mount the magnet, the sensor, and the bracket on your bicycle. Periodically check to insure they are mounted securely and the screws are not loosen. Keep batteries out of reach of small children. Dispose of batteries according to local regulations.
Installation of the Computer on Your Bike
The computer is combined with the following parts.
U.S. Pat. Nos.4633216/4642606/5226340/5236759 Pat. and Design Pat. Pending Copyright 2002 CAT EYE Co. Ltd. CCMMT4-1
Avoid unnecessary prolonged exposure to the sun. Never attempt to disassemble the computer head. Dont use thinner, benzene or alcohol to wipe the surface of the Important computer. They may damage the surface of computer. Note
Please read these instructions carefully before attempting to install and use your CAT EYE MITY 8 computer so that you understand the functions of this product.
Please dont throw away this manual, Keep the manual at a place easily accessible.
Computer Set-up (For 1st use or after replacing the battery)
Push three buttons (MODE, START/ STOP and SET) at the same time. * Do this procedure without fail for stable measurement when you use this system for the first time and every time the battery is replaced.
SET Button SET Button Contact Point
1 Bracket 2 Cord 3 Sensor 4 Sensor Rubber Pad
5 Magnet 6 Bracket Rubber Pad 7 Nylon Ties (5)
Sensor Side Spoke
START/STOP Button MODE Button
Select The Measurement Unit
Select the measurement unit, kilometer or mile, by pushing the MODE button.
You need to know the tire circumference (L cm) beforehand.
Mount the magnet
5 on a spoke of the front wheel so that the surface of the magnet will face the sensor.
Mount sensor and adjust the gap between the magnet and the sensor.
Secure the sensor 3 with the larger nylon ties 7 at the appropriate place and in the right direction.
Choose Either of The Followings. When you want to input the reading of the currently used odometer, keep pressing the MODE button for two seconds and input the reading. When you want to start the odometer from zero, push the START/STOP button.
You can refer to the guide chart to roughly know the tire circumference.
14 x 1.x 1.x 1.x 1.x 1.x 1.x 1.x 1-3/x 1-3/x 1-1/x x 3/4Tubular 24 x 1-1/x 1-1/x 1.x 2.x 2.x 7/x 1(59) 26 x 1(65) 26 x 1.x 1-1/x 1-3/x 1-1/x 1.x 1.x 1.x 1.x 2.x 2.x 2.x 2.x 3.x x 1-1/x 1-1/x 1-3/x 35A 650 x 38A 650 x 38B 700 x 18C 700 x 19C 700 x 20C 700 x 23C 700 x 25C 700 x 28C 700 x 30C 700 x 32C 700C Tubular 700 x 35C 700 x 38C 700 x 40C
Starting the odometer from zero.
Retaining the current odometer reading
(the odometer starts from the reading you inputted)
Front Fork For two seconds.
Mount the sensor 3 at the appropriate position so that the center of the magnet 5 will align with the marked line on the sensor when the wheel is rotated.
Input the current reading of odometer.
Increase the number.
Rotate the sensor on the front fork to adjust the gap between the sensor and the magnet 5 within 5 mm, and secure it with the nylon ties.
Within 5 mm Center
Move the decimal point.
Mount The Bracket
Secure the cord on the front fork with the nylon ties (smaller ones) 7 and coil it around the brake cable that leads to the handle bar. Put the rubber pad 6 on the bracket 1 and secure the bracket on the handle bar with the screw. Slide the computer into the bracket until you hear the click sound The contact points are automatically closed. When you need to remove the computer, slide forward the computer with the lever pushed simultaneously. Note Allow enough wire clearance in the area marked with an to insure that you can turn the handlebar from left to right without pulling the wire.
Lever Increase the number. Max. 300 cm
Set The Tire Circumference
Set the tire circumference in cm. Note You can easily set it by referring to the chart shown right. Setting is completed by pushing the SET button.
Rotate the front wheel.
Decrease the number Min. 100 cm
Basic Functions Test
Rotate the front wheel gently and see if the computer indicates the running speed. Note When the computer does not indicate the speed, check the position of the magnet and the sensor.
(the screen will show the time measurement in this state) * The auto mode is ON in this state.
Tire size is usually shown on the sidewall of tires.
Selection of the data-display mode (bottom of the screen). Pressing the MODE button changes the functions in the sub-display. Clock Time - In Elapsed Time, press and hold the Mode button for two seconds to display Clock Time. Pressing the Mode button again will return the sub-display to Elapsed Time. Trip Distance 1 and 2 The computer has two separate trip distances. Trip Distance 2 is reset independently. It can be used to record distance within a ride or multiple days distances. In Trip Distance 1, press and hold the Mode button to select Distance 2. You will continue to view this distance until you select Distance 1 with the same procedure. Start or Stop of Measurements. The computer can be programmed to run in either MANUAL MODE or AUTO TIME MODE. In Manual Mode you must press the START / STOP button to turn on and off the Timer, which records Distance and Average Speeds. In Auto Time the computer turns the Timer on and off depending on a signal from the sensor. When speed is detected by the computer and the Timer is running, the km/h or mph will flash. Speed will appear on the computer screen and the Odometer will record, regardless if the Timer is running or not. Auto Time Mode (Automatic Measurement) In AUTO TIME mode, the letters will appear on the computer screen. Elapsed time, Average and Distance are recorded automatically and the Timer, stops when the speed stops. In this mode the START/STOP button is not operable. Manual Measurements When you dont see the icon on the screen, you can start or stop the measurements by pushing the START/STOP button. When you push the button, measurements of Elapsed Time, Average Speed, Trip Distance 1 and 2 are started and they are stopped with the second push of the button. How to set ON or OFF the auto-mode Push the SET button on the back side of the computer while Elapsed Time, Average Speed, Trip Distance 1 or 2 is displayed, then the icon is lit (ON) or turned OFF. Resetting Elapsed Time, Trip Distance, Average Speed and Max Speed. Press and hold the MODE and START/STOP buttons for 2 sec. in either the Elapsed Time, Trip Distance 1, Average Speed or Maximum Speed functions to reset these functions. The Odometer and Trip Distance 2 are not reset. See below for details. Resetting Trip Distance 2 Trip Distance 2 is reset independently. When Trip Distance 2 is on the screen, press and hold both the MODE and START/STOP buttons to reset.
Measurement Unit Icon
Speed 0.0 (4.0) - 105.9 km/h
[0.0 (3.0) - 65.9 mph]
Power Saving Screen
(When no signal is received for about one hour, the computer switches to the power-saving mode) When you push either of the MODE button or the START/STOP button or you ride the bicycle, the display comes back to the measurement display.
Average Pace Arrow
It shows that the current speed is faster or slower than the Average Speed. Faster Slower
Auto-mode Icon Wheel Icon
When it is lit, the measurements are automatically started or stopped. Indicates which wheel setting is selected.
Mode Selection Illustrations (bottom of the screen)
You can program two tire sizes and use either of them.
0.0 -105.9 km/h [0.0 - 65.9 mph] How to select tire size
When data other than Odo is displayed SET Keep on pressing the button for two seconds When the Odo data is displayed
Trip distance - 1
0.00 -999.99 km [mile]
Trip distance - 2
0.00 - 999.99 km [mile]
* Resetting of Dst2 only
Keep on pressing buttons for 2 sec. at the same time
Inputting the Tire Circumference
Return to Odo
Tm Av Dst
Range of setting: 100 - 300 cm
0.0 - 99999 km [mile]
When the measurements are stopped
For 2 sec. at the same time
For 2 sec.
Increase the number
Decrease the number
0.0 (4.0) - 105.0 km/h [0.0(3.0) - 65.0 mph]
0:0000 - 9:5959
Setting The Clock Time
24 hour or 12 hour system is to be used with km/h or mph unit respectively
Computer Functions Power-saving Function When no signal has been received for about one hour, the computer goes into the power savings mode to only display the Clock. When any button is pushed or the wheel is rotated, the computer screen reappears. Dual Tire Size You can program two, and , tire circumferences and can easily switch to or vise versa to enable the system to be used by two bicycles which have different tire sizes. The computer program for circumference is programmed for low speed use. We recommend to use this for MTB's. Elapsed Average Maximum Moving Elapsed Time, Average Speed and Maximum Time Speed Speed Speed to the upper display. Minute Mx Upper Av Part Second You can move the Elapsed Time, Average and Max Speed Lower displays to the upper display for easier viewing. Hold the Hour SPD SPD Part START/STOP button for 2 sec. and the sub-display will appear in the upper display. Hold the START/STOP button again for 2 sec. and the display returns to the normal set up.
Return to Clock display
0:00 - 23:59 [1:00 - 12:59]
When the measurements Set the hour are stopped.
Set the minute
Battery Life : --------------------------------- A Lithium Battery (CR2032), Approx:3 yrs (approx:1 hrs per day usage) Control System : ---------------------------- 4-bit 1-chip micro-computer (with a crystal oscillator) Display : -------------------------------------- Liquid crystal display Sensing System : --------------------------- No-contact magnetic sensor Range of Tire Circumference : ------------- 100 cm 300 cm (Initial value A:210 cm B:205 cm) Range of Operational Temperature : ------ 0C 40C [32F 104F] Dimension and Weight(Computer) : ------ 38 x 54 x 17.5 mm [1-1/2 x 2-1/8 x 11/16"] / 28 g [1.0 oz] * The factory-loaded battery life might be shorter than the above-mentioned specification. * The specifications and design are subject to change without notice.
Troubleshooting No display appears. Is the battery dead? Replace it by the new one and do all clear procedure. Strange data appears Do all clear procedure (write down the number of Odometer if possible before doing the all clear procedure and input it manually after choosing the measurement unit). Measurements do not start when the START/STOP button is pushed. Is the icon ON? Turn the Auto-Mode off to enable the start or stop of the measurements by manual operation of the button. No speed data is displayed. (If the speed data is not displayed, have the contact points short-circuited by a metal plate. In the case that this short-circuiting is detected by the computer, the computer is considered normal and the bracket and sensor may possibly have the cause of trouble.) Is the gap between the sensor and the magnet too big? (should be within 5 mm) Does the marked line of the sensor align with the center of the magnet? Adjust the position of the magnet and the sensor. Make sure that the contact points of the bracket or of the main body are free from dirt. Wipe the contact points clean. Is the cord not broken? Even if the outside of the cord looks normal, a breakage in the wire can occur. Replace the bracket and sensor set with a new one.
Limited Warranty 2-Year Warranty : Computer Head Only (excluding the attached parts and deteriorated battery ) If any trouble or damage occurs during normal use, the product computer will be repaired or replaced free of charge. Type your name, address, telephone number or e-mail address, date of purchase and the situation of trouble and send it back together with the product to the closest address below. Transportation charges shall be borne by the customer. After being repaired, the product will be shipped back to the customer.
2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546-0041 Japan Attn.: CAT EYE Customer Service Section Service & Research Address for United States Consumers: CAT EYE Service & Research Center 1705 14th St. 115 Boulder, CO 80302 Phone: 303-443-4595 Toll Free: 800-5CATEYE Fax: 303-473-0006 e-mail: firstname.lastname@example.org URL: http://www.cateye.com * Accessory parts are available for the customers as shown below.
Bracket Sensor Kit [Long]
Attachment Kit Wheel Magnet
Lithium Battery (CR2032)
Maintenance To clean the computer or the attached parts, use diluted neutral detergent on a soft cloth, and wipe it off with a dry cloth. Replacing The Battery When the display gets dim, replace the battery. If you want to retain and use the current reading of odometer, write down the odometer data before replacing the battery. Put a lithium battery CR2032 in the computer with the (+) mark facing up. After replacing the battery, do the necessary set-up of the computer in accordance with "Computer Set-up".
Heavy Duty Wire and Bracket Sensor Kit
Center Mount Bracket Kit [Long]
Bracket Sensor Kit for Aero Bar
Stem Mount Bracket Kit Magnet for Composite Wheel
TDS360T MS-7267 Aficio 180 IP-901 FME800 Driver Pack Motolivn D802 DJM-909 PMC-MD55 WV-CF284 Avic-F900BT Delonghi CG18 Favorit 865 Soavo-900SW MX5700D 22S FW339C 42LH2000 TH-50PZ700E Grandstream GXP Technology AC-VQ11 Flashpaper 6561GM CMT-DC1 995E-CB995ce- Review CT-W505R 7 II Razr V3M HS4W- GT-M3510 Ecmp50 VS900 DCR-PC1000E 728explus VCL-HGE08B FW650C 22 - 2003 TM751 RL41ecsw LTC0430 PA 50 Passat CC HP-237 Coolpix S640 VG-8EX S12ME Edition TH-42PZ70EA VP-D26I IP2200 600 PVR AR-5012 AHS 4-16 SP-R5050 MIO 168 HX520W Yamaha MU5 DSB-H370G DSC-P32 Celestron C8 Premio ST2 H3850 KDL-40NX703 VPC-S600 AR6L 95 CPM-300 Officejet 7410 Cherokee Iron GYM VSX-D411 Rancilio Sportrak Base UR 2 Plus Autometer III ICD-U70 RS-B765 STB-1001H ML-2240 R-09HR 19PFL4322 Travelmate-4000 AV260C ZWG390 AWT1255AA Meridian XL KS 1001 Rosetta 200 CDX-A360 CUV4X-VM OW5003 TLP 781 RS-BX501 C 23 CPI 1550 Soundsticks Stylistic 3500 SA-HT740 TX-32LXD80F HS 10
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101